def heating_limit(self, value):
if value is None:
self._heating_limit = None
elif isinstance(value, str) and value.lower() == 'autosize':
self._heating_limit = 'autosize'
else:
self._heating_limit = float_positive(value, 'ideal air heating limit')
def __init__(self, identifier, economizer_type='DifferentialDryBulb',
demand_controlled_ventilation=False,
sensible_heat_recovery=0, latent_heat_recovery=0,
heating_air_temperature=50, cooling_air_temperature=13,
heating_limit=autosize, cooling_limit=autosize,
heating_availability=None, cooling_availability=None):
"""Initialize IdealAirSystem."""
# initialize base HVAC system properties
_HVACSystem.__init__(self, identifier)
# set the main features of the HVAC system
self.economizer_type = economizer_type
self.demand_controlled_ventilation = demand_controlled_ventilation
self.sensible_heat_recovery = sensible_heat_recovery
self.latent_heat_recovery = latent_heat_recovery
# set the options affecting heating and cooling
# set heating_air_temperature without the setter to ensure > cooling check works
self._heating_air_temperature = \
float_positive(heating_air_temperature, 'ideal air heating air temperature')
self.cooling_air_temperature = cooling_air_temperature
self.heating_limit = heating_limit
self.cooling_limit = cooling_limit
self.heating_availability = heating_availability
self.cooling_availability = cooling_availability
def heating_limit(self, value):
if value == autosize or value is None:
self._heating_limit = autosize
elif value == no_limit:
self._heating_limit = no_limit
else:
self._heating_limit = float_positive(value, 'ideal air heating limit')
def cooling_limit(self, value):
if value == autosize or value is None:
self._cooling_limit = autosize
elif value == no_limit:
assert self.economizer_type == 'NoEconomizer', 'Ideal air system ' \
'economizer_type must be "NoEconomizer" to have no cooling limit.'
self._cooling_limit = no_limit
else:
self._cooling_limit = float_positive(value, 'ideal air cooling limit')
def cooling_limit(self, value):
if value is None:
# assert self.economizer_type == 'NoEconomizer', 'Ideal air system ' \
# 'economizer_type must be "NoEconomizer" to have no cooling limit.'
self._cooling_limit = None
elif isinstance(value, str) and value.lower() == 'autosize':
self._cooling_limit = 'autosize'
else:
self._cooling_limit = float_positive(value, 'ideal air cooling limit')
def __init__(self,
distance,
depth,
offset=0,
angle=0,
contour_vector=Vector2D(0, 1),
flip_start_side=False):
"""Initialize LouversByDistance."""
self._distance = float_positive(distance, 'louver separation distance')
_LouversBase.__init__(self, depth, offset, angle, contour_vector,
flip_start_side)
def test_float_positive():
"""Test the float_positive method."""
assert isinstance(float_positive(2.0), float)
assert isinstance(float_positive(2), float)
assert isinstance(float_positive('2'), float)
with pytest.raises(AssertionError):
assert isinstance(float_positive(-2), float)
with pytest.raises(TypeError):
assert isinstance(float_positive('two'), float)
with pytest.raises(TypeError):
assert isinstance(float_positive([2]), float)
try:
float_positive(-2, 'test number')
except AssertionError as e:
assert 'test number' in str(e)
def area_per_person(self, value):
if float(value) != 0:
self._people_per_area = 1 / float_positive(value,
'area per person')
else:
self._people_per_area = 0
def floor_area(self, value):
self._floor_area = float_positive(value)
def r_factor(self, r_fac):
self._u_factor = 1 / float_positive(r_fac, 'glazing material r-factor')
def u_value(self, u_val):
self.r_value = 1 / float_positive(u_val, 'glazing material u-value')
def conductivity(self, cond):
self._conductivity = float_positive(cond,
'glazing material conductivity')
def low_voltage(self, value):
self._low_voltage = float_positive(value, 'low voltage')
def high_voltage(self, value):
self._high_voltage = float_positive(value, 'high voltage')
def reactance(self, value):
self._reactance = float_positive(value, 'reactance')
def velocity_coefficient(self, value):
self._velocity_coefficient = float_positive(
value, 'infiltration velocity coefficient')
def flow_per_exterior_area(self, value):
self._flow_per_exterior_area = float_positive(
value, 'infiltration flow per area')
def air_mixing_per_area(self, value):
self._air_mixing_per_area = float_positive(value,
'air mixing per area')
def thickness(self, thick):
self._thickness = float_positive(thick, 'glazing material thickness')
def radius_end(self, value):
self._radius_end = typing.float_positive(value)
def resistivity(self, resis):
self._conductivity = 1 / float_positive(
resis, 'glazing material resistivity')
def radius_start(self, value):
self._radius_start = typing.float_positive(value)
def r_value(self, r_val):
self._conductivity = self.thickness / \
float_positive(r_val, 'glazing material r-value')
def flow_per_area(self, value):
self._flow_per_area = float_positive(value, 'hot water flow per area')
def b_emittance(self, value):
self._b_emittance = typing.float_positive(value)
def floor_to_floor_height(self, value):
if value is None:
ciel_hgt = max([room.ceiling_height for room in self._room_2ds])
value = ciel_hgt - self.floor_height
self._floor_to_floor_height = float_positive(value, 'floor-to-floor height')
def people_per_area(self, value):
self._people_per_area = float_positive(value, 'people per area')
def constant_coefficient(self, value):
self._constant_coefficient = float_positive(
value, 'infiltration constant coefficient')
def radius_inner(self, value):
self._radius_inner = typing.float_positive(value)
def temperature_coefficient(self, value):
self._temperature_coefficient = float_positive(
value, 'infiltration temperature coefficient')
