def check_host_connections(vm, uds_path, blob_path, blob_hash):
"""Test host-initiated connections.
This will start a daemonized echo server on the guest VM, and then spawn
`TEST_CONNECTION_COUNT` `HostEchoWorker` threads.
After the workers are done transferring the data read from `blob_path`,
the hashes they computed for the data echoed back by the server are
checked against `blob_hash`.
"""
conn = SSHConnection(vm.ssh_config)
cmd = "vsock_helper echosrv -d {}".format(ECHO_SERVER_PORT)
ecode, _, _ = conn.execute_command(cmd)
assert ecode == 0
workers = []
for _ in range(TEST_CONNECTION_COUNT):
worker = HostEchoWorker(uds_path, blob_path)
workers.append(worker)
worker.start()
for wrk in workers:
wrk.join()
for wrk in workers:
assert wrk.hash == blob_hash
def test_rtc(test_microvm_with_api, network_config):
"""
Test RTC functionality on aarch64.
@type: functional
"""
vm = test_microvm_with_api
vm.spawn()
vm.memory_monitor = None
vm.basic_config()
_tap, _, _ = vm.ssh_network_config(network_config, "1")
vm.start()
conn = SSHConnection(vm.ssh_config)
# check that the kernel creates an rtcpl031 base device.
_, stdout, _ = conn.execute_command("dmesg")
rtc_log = re.findall(DMESG_LOG_REGEX, stdout.read())
assert rtc_log is not None
_, stdout, _ = conn.execute_command("stat /dev/rtc0")
assert "character special file" in stdout.read()
_, host_stdout, _ = utils.run_cmd("date +%s")
_, guest_stdout, _ = conn.execute_command("date +%s")
assert abs(int(guest_stdout.read()) - int(host_stdout)) < 5
def negative_test_host_connections(vm, uds_path, blob_path, blob_hash):
"""Negative test for host-initiated connections.
This will start a daemonized echo server on the guest VM, and then spawn
`NEGATIVE_TEST_CONNECTION_COUNT` `HostEchoWorker` threads.
Closes the UDS sockets while data is in flight.
"""
conn = SSHConnection(vm.ssh_config)
cmd = "vsock_helper echosrv -d {}".format(ECHO_SERVER_PORT)
ecode, _, _ = conn.execute_command(cmd)
assert ecode == 0
workers = []
for _ in range(NEGATIVE_TEST_CONNECTION_COUNT):
worker = HostEchoWorker(uds_path, blob_path)
workers.append(worker)
worker.start()
for wrk in workers:
wrk.close_uds()
wrk.join()
# Validate that Firecracker is still up and running.
ecode, _, _ = conn.execute_command("sync")
# Should fail if Firecracker exited from SIGPIPE handler.
assert ecode == 0
# Validate vsock emulation still accepts connections and works
# as expected.
check_host_connections(vm, uds_path, blob_path, blob_hash)
def check_guest_connections(vm, server_port_path, blob_path, blob_hash):
"""Test guest-initiated connections.
This will start an echo server on the host (in its own thread), then
start `TEST_CONNECTION_COUNT` workers inside the guest VM, all
communicating with the echo server.
"""
echo_server = HostEchoServer(vm, server_port_path)
echo_server.start()
conn = SSHConnection(vm.ssh_config)
# Increase maximum process count for the ssh service.
# Avoids: "bash: fork: retry: Resource temporarily unavailable"
# Needed to execute the bash script that tests for concurrent
# vsock guest initiated connections.
ecode, _, _ = conn.execute_command("echo 1024 > \
/sys/fs/cgroup/pids/system.slice/ssh.service/pids.max")
assert ecode == 0, "Unable to set max process count for guest ssh service."
# Build the guest worker sub-command.
# `vsock_helper` will read the blob file from STDIN and send the echo
# server response to STDOUT. This response is then hashed, and the
# hash is compared against `blob_hash` (computed on the host). This
# comparison sets the exit status of the worker command.
worker_cmd = "hash=$("
worker_cmd += "cat {}".format(blob_path)
worker_cmd += " | vsock_helper echo 2 {}".format(ECHO_SERVER_PORT)
worker_cmd += " | md5sum | cut -f1 -d\\ "
worker_cmd += ")"
worker_cmd += " && [[ \"$hash\" = \"{}\" ]]".format(blob_hash)
# Run `TEST_CONNECTION_COUNT` concurrent workers, using the above
# worker sub-command.
# If any worker fails, this command will fail. If all worker sub-commands
# succeed, this will also succeed.
cmd = "workers=\"\";"
cmd += "for i in $(seq 1 {}); do".format(TEST_CONNECTION_COUNT)
cmd += " ({})& ".format(worker_cmd)
cmd += " workers=\"$workers $!\";"
cmd += "done;"
cmd += "for w in $workers; do wait $w || exit -1; done"
ecode, _, _ = conn.execute_command(cmd)
echo_server.exit()
assert echo_server.error is None
assert ecode == 0, ecode
def test_vsock(
test_microvm_with_api,
network_config,
bin_vsock_path,
test_fc_session_root_path
):
"""
Test guest and host vsock initiated connections.
Check the module docstring for details on the setup.
@type: functional
"""
vm = test_microvm_with_api
vm.spawn()
vm.basic_config()
_tap, _, _ = vm.ssh_network_config(network_config, '1')
vm.vsock.put(
vsock_id="vsock0",
guest_cid=3,
uds_path="/{}".format(VSOCK_UDS_PATH)
)
vm.start()
conn = SSHConnection(vm.ssh_config)
check_vsock_device(vm, bin_vsock_path,
test_fc_session_root_path,
conn)
def test_vsock_epipe(
test_microvm_with_api,
network_config,
bin_vsock_path,
test_fc_session_root_path
):
"""
Vsock negative test to validate SIGPIPE/EPIPE handling.
@type: negative
"""
vm = test_microvm_with_api
vm.spawn()
vm.basic_config()
_tap, _, _ = vm.ssh_network_config(network_config, '1')
vm.vsock.put(
vsock_id="vsock0",
guest_cid=3,
uds_path="/{}".format(VSOCK_UDS_PATH)
)
# Configure metrics to assert against `sigpipe` count.
metrics_fifo_path = os.path.join(vm.path, 'metrics_fifo')
metrics_fifo = log_tools.Fifo(metrics_fifo_path)
response = vm.metrics.put(
metrics_path=vm.create_jailed_resource(metrics_fifo.path)
)
assert vm.api_session.is_status_no_content(response.status_code)
vm.start()
# Generate the random data blob file.
blob_path, blob_hash = make_blob(test_fc_session_root_path)
vm_blob_path = "/tmp/vsock/test.blob"
conn = SSHConnection(vm.ssh_config)
# Set up a tmpfs drive on the guest, so we can copy the blob there.
# Guest-initiated connections (echo workers) will use this blob.
_copy_vsock_data_to_guest(conn, blob_path, vm_blob_path, bin_vsock_path)
path = os.path.join(vm.jailer.chroot_path(), VSOCK_UDS_PATH)
# Negative test for host-initiated connections that
# are closed with in flight data.
negative_test_host_connections(vm, path, blob_path, blob_hash)
metrics = vm.flush_metrics(metrics_fifo)
# Validate that at least 1 `SIGPIPE` signal was received.
# Since we are reusing the existing echo server which triggers
# reads/writes on the UDS backend connections, these might be closed
# before a read() or a write() is about to be performed by the emulation.
# The test uses 100 connections it is enough to close at least one
# before write().
#
# If this ever fails due to 100 closes before read() we must
# add extra tooling that will trigger only writes().
assert metrics['signals']['sigpipe'] > 0
def check_guest_connections(vm, server_port_path, blob_path, blob_hash):
"""Test guest-initiated connections.
This will start an echo server on the host (in its own thread), then
start `TEST_CONNECTION_COUNT` workers inside the guest VM, all
communicating with the echo server.
"""
echo_server = HostEchoServer(vm, server_port_path)
echo_server.start()
# Build the guest worker sub-command.
# `vsock_helper` will read the blob file from STDIN and send the echo
# server response to STDOUT. This response is then hashed, and the
# hash is compared against `blob_hash` (computed on the host). This
# comparison sets the exit status of the worker command.
worker_cmd = "hash=$("
worker_cmd += "cat {}".format(blob_path)
worker_cmd += " | vsock_helper echo 2 {}".format(ECHO_SERVER_PORT)
worker_cmd += " | md5sum | cut -f1 -d\\ "
worker_cmd += ")"
worker_cmd += " && [[ \"$hash\" = \"{}\" ]]".format(blob_hash)
# Run `TEST_CONNECTION_COUNT` concurrent workers, using the above
# worker sub-command.
# If any worker fails, this command will fail. If all worker sub-commands
# succeed, this will also succeed.
cmd = "workers=\"\";"
cmd += "for i in $(seq 1 {}); do".format(TEST_CONNECTION_COUNT)
cmd += " ({})& ".format(worker_cmd)
cmd += " workers=\"$workers $!\";"
cmd += "done;"
cmd += "for w in $workers; do wait $w || exit -1; done"
conn = SSHConnection(vm.ssh_config)
ecode, _, _ = conn.execute_command(cmd)
echo_server.exit()
assert echo_server.error is None
assert ecode == 0
def test_vsock(
test_microvm_with_ssh,
network_config,
bin_vsock_path,
test_session_root_path
):
"""Vsock tests. See the module docstring for a high-level description."""
vm = test_microvm_with_ssh
vm.spawn()
vm.basic_config()
_tap, _, _ = vm.ssh_network_config(network_config, '1')
vm.vsock.put(
vsock_id="vsock0",
guest_cid=3,
uds_path="/{}".format(VSOCK_UDS_PATH)
)
vm.start()
# Generate the random data blob file.
blob_path, blob_hash = make_blob(test_session_root_path)
vm_blob_path = "/tmp/vsock/test.blob"
# Set up a tmpfs drive on the guest, so we can copy the blob there.
# Guest-initiated connections (echo workers) will use this blob.
conn = SSHConnection(vm.ssh_config)
cmd = "mkdir -p /tmp/vsock"
cmd += " && mount -t tmpfs tmpfs -o size={} /tmp/vsock".format(
BLOB_SIZE + 1024*1024
)
ecode, _, _ = conn.execute_command(cmd)
assert ecode == 0
# Copy `vsock_helper` and the random blob to the guest.
vsock_helper = bin_vsock_path
conn.scp_file(vsock_helper, '/bin/vsock_helper')
conn.scp_file(blob_path, vm_blob_path)
# Test guest-initiated connections.
path = os.path.join(
vm.path,
_make_host_port_path(VSOCK_UDS_PATH, ECHO_SERVER_PORT)
)
check_guest_connections(vm, path, vm_blob_path, blob_hash)
# Test host-initiated connections.
path = os.path.join(vm.jailer.chroot_path(), VSOCK_UDS_PATH)
check_host_connections(vm, path, blob_path, blob_hash)
def test_vsock_transport_reset(bin_cloner_path, bin_vsock_path,
test_fc_session_root_path):
"""
Vsock transport reset test.
Steps:
1. Start echo server on the guest
2. Start host workers that ping-pong data between guest and host,
without closing any of them
3. Pause VM -> Create snapshot -> Resume VM
4. Check that worker sockets no longer work by setting a timeout
so the sockets won't block and do a recv operation.
5. If the recv operation timeouts, the connection was closed.
Else, the connection was not closed and the test fails.
6. Close VM -> Load VM from Snapshot -> check that vsock
device is still working.
@type: functional
"""
vm_builder = MicrovmBuilder(bin_cloner_path)
vm_instance = vm_builder.build_vm_nano()
test_vm = vm_instance.vm
root_disk = vm_instance.disks[0]
ssh_key = vm_instance.ssh_key
test_vm.vsock.put(vsock_id="vsock0",
guest_cid=3,
uds_path="/{}".format(VSOCK_UDS_PATH))
test_vm.start()
snapshot_builder = SnapshotBuilder(test_vm)
disks = [root_disk.local_path()]
# Generate the random data blob file.
blob_path, blob_hash = make_blob(test_fc_session_root_path)
vm_blob_path = "/tmp/vsock/test.blob"
conn = SSHConnection(test_vm.ssh_config)
# Set up a tmpfs drive on the guest, so we can copy the blob there.
# Guest-initiated connections (echo workers) will use this blob.
_copy_vsock_data_to_guest(conn, blob_path, vm_blob_path, bin_vsock_path)
# Start guest echo server.
path = os.path.join(test_vm.jailer.chroot_path(), VSOCK_UDS_PATH)
conn = SSHConnection(test_vm.ssh_config)
cmd = "vsock_helper echosrv -d {}".format(ECHO_SERVER_PORT)
ecode, _, _ = conn.execute_command(cmd)
assert ecode == 0
# Start host workers that connect to the guest server.
workers = []
for _ in range(TEST_WORKER_COUNT):
worker = HostEchoWorker(path, blob_path)
workers.append(worker)
worker.start()
for wrk in workers:
wrk.join()
# Create snapshot.
snapshot = snapshot_builder.create(disks, ssh_key, SnapshotType.FULL)
response = test_vm.vm.patch(state="Resumed")
assert test_vm.api_session.is_status_no_content(response.status_code)
# Check that sockets are no longer working on workers.
for worker in workers:
# Whatever we send to the server, it should return the same
# value.
buf = bytearray("TEST\n".encode("utf-8"))
worker.sock.send(buf)
try:
# Arbitrary timeout, we set this so the socket won't block as
# it shouldn't receive anything.
worker.sock.settimeout(0.25)
response = worker.sock.recv(32)
# If we reach here, it means the connection did not close.
assert False, "Connection not closed: {}".format(
response.decode("utf-8"))
except SocketTimeout as exc:
assert True, exc
# Terminate VM.
test_vm.kill()
# Load snapshot.
test_vm, _ = vm_builder.build_from_snapshot(snapshot,
resume=True,
diff_snapshots=False)
# Check that vsock device still works.
# Test guest-initiated connections.
path = os.path.join(test_vm.path,
make_host_port_path(VSOCK_UDS_PATH, ECHO_SERVER_PORT))
check_guest_connections(test_vm, path, vm_blob_path, blob_hash)
# Test host-initiated connections.
path = os.path.join(test_vm.jailer.chroot_path(), VSOCK_UDS_PATH)
check_host_connections(test_vm, path, blob_path, blob_hash)
