class TrayColumnData(UnitModelBlockData):
"""
Tray Column model.
"""
CONFIG = ConfigBlock()
CONFIG.declare(
"dynamic",
ConfigValue(domain=In([False]),
default=False,
description="Dynamic model flag - must be False",
doc="""Indicates whether this model will be dynamic or not,
**default** = False. Tray column units do not support dynamic behavior."""))
CONFIG.declare(
"has_holdup",
ConfigValue(
default=False,
domain=In([False]),
description="Holdup construction flag - must be False",
doc="""Indicates whether holdup terms should be constructed or not.
**default** - False. Tray column units do not have defined volume, thus
this must be False."""))
CONFIG.declare(
"number_of_trays",
ConfigValue(default=None,
domain=In(Integers),
description="Number of trays in the column",
doc="""Indicates the number of trays to be constructed.
**default** - None.
**Valid values:** {
Must be integer number.}"""))
CONFIG.declare(
"feed_tray_location",
ConfigValue(default=None,
domain=In(Integers),
description="Feed tray location in the column",
doc="""Indicates the number of trays to be constructed.
**default** - None.
**Valid values:** {
Must be integer number.}"""))
CONFIG.declare(
"condenser_type",
ConfigValue(
default=CondenserType.totalCondenser,
domain=In(CondenserType),
description="Type of condenser flag",
doc="""Indicates what type of condenser should be constructed,
**default** - CondenserType.totalCondenser.
**Valid values:** {
**CondenserType.totalCondenser** - Incoming vapor from top tray is condensed
to all liquid,
**CondenserType.partialCondenser** - Incoming vapor from top tray is
partially condensed to a vapor and liquid stream.}"""))
CONFIG.declare(
"condenser_temperature_spec",
ConfigValue(default=None,
domain=In(TemperatureSpec),
description="Temperature spec for the condenser",
doc="""Temperature specification for the condenser,
**default** - TemperatureSpec.none
**Valid values:** {
**TemperatureSpec.none** - No spec is selected,
**TemperatureSpec.atBubblePoint** - Condenser temperature set at
bubble point i.e. total condenser,
**TemperatureSpec.customTemperature** - Condenser temperature at
user specified temperature.}"""))
CONFIG.declare(
"has_heat_transfer",
ConfigValue(default=False,
domain=Bool,
description="heat duty to/from tray construction flag.",
doc="""indicates if there is heat duty to/from the tray,
**default** - False.
**Valid values:** {
**True** - include a heat duty term,
**False** - exclude a heat duty term.}"""))
CONFIG.declare(
"has_pressure_change",
ConfigValue(
default=False,
domain=Bool,
description="pressure change term construction flag",
doc="""indicates whether terms for pressure change should be
constructed,
**default** - False.
**Valid values:** {
**True** - include pressure change terms,
**False** - exclude pressure change terms.}"""))
CONFIG.declare(
"has_liquid_side_draw",
ConfigValue(
default=False,
domain=Bool,
description="liquid side draw construction flag.",
doc="""indicates if there is a liquid side draw from all trays,
**default** - False.
**Valid values:** {
**True** - include a liquid side draw for all trays,
**False** - exclude a liquid side draw for all trays.}"""))
CONFIG.declare(
"has_vapor_side_draw",
ConfigValue(
default=False,
domain=Bool,
description="vapor side draw construction flag.",
doc="""indicates if there is a vapor side draw from all trays,
**default** - False.
**Valid values:** {
**True** - include a vapor side draw for all trays,
**False** - exclude a vapor side draw for all trays.}"""))
CONFIG.declare(
"property_package",
ConfigValue(
default=useDefault,
domain=is_physical_parameter_block,
description="property package to use for control volume",
doc=
"""property parameter object used to define property calculations,
**default** - useDefault.
**Valid values:** {
**useDefault** - use default package from parent model or flowsheet,
**PropertyParameterObject** - a PropertyParameterBlock object.}"""))
CONFIG.declare(
"property_package_args",
ConfigBlock(
implicit=True,
description="arguments to use for constructing property packages",
doc=
"""a ConfigBlock with arguments to be passed to a property block(s)
and used when constructing these,
**default** - None.
**Valid values:** {
see property package for documentation.}"""))
def build(self):
"""Build the model.
Args:
None
Returns:
None
"""
# Call UnitModel.build to setup dynamics
super(TrayColumnData, self).build()
# Create set for constructing indexed trays
if self.config.number_of_trays is not None:
self.tray_index = RangeSet(1, self.config.number_of_trays)
self._rectification_index = RangeSet(
1, self.config.feed_tray_location - 1)
self._stripping_index = RangeSet(
self.config.feed_tray_location + 1,
self.config.number_of_trays)
else:
raise ConfigurationError("The config argument number_of_trays "
"needs to specified and cannot be None.")
# Add trays
# TODO:
# 1. Add support for multiple feed tray locations
# 2. Add support for specifying which trays have side draws
self.rectification_section = Tray(self._rectification_index,
default={
"has_liquid_side_draw":
self.config.has_liquid_side_draw,
"has_vapor_side_draw":
self.config.has_vapor_side_draw,
"has_heat_transfer":
self.config.has_heat_transfer,
"has_pressure_change":
self.config.has_pressure_change,
"property_package":
self.config.property_package,
"property_package_args":
self.config.property_package_args
})
self.feed_tray = Tray(
default={
"is_feed_tray": True,
"has_liquid_side_draw": self.config.has_liquid_side_draw,
"has_vapor_side_draw": self.config.has_vapor_side_draw,
"has_heat_transfer": self.config.has_heat_transfer,
"has_pressure_change": self.config.has_pressure_change,
"property_package": self.config.property_package,
"property_package_args": self.config.property_package_args
})
self.stripping_section = Tray(self._stripping_index,
default={
"has_liquid_side_draw":
self.config.has_liquid_side_draw,
"has_vapor_side_draw":
self.config.has_vapor_side_draw,
"has_heat_transfer":
self.config.has_heat_transfer,
"has_pressure_change":
self.config.has_pressure_change,
"property_package":
self.config.property_package,
"property_package_args":
self.config.property_package_args
})
# Add condenser
self.condenser = Condenser(
default={
"condenser_type": self.config.condenser_type,
"temperature_spec": self.config.condenser_temperature_spec,
"property_package": self.config.property_package,
"property_package_args": self.config.property_package_args
})
# Add reboiler
self.reboiler = Reboiler(
default={
"has_boilup_ratio": True,
"has_pressure_change": self.config.has_pressure_change,
"property_package": self.config.property_package,
"property_package_args": self.config.property_package_args
})
# Add extension to the feed port
self.feed = Port(extends=self.feed_tray.feed)
# Add extensions to rectification section
# Add extensions to stripping section
# Construct arcs between trays, condenser, and reboiler
self._make_rectification_arcs()
self._make_stripping_arcs()
self._make_feed_arcs()
self._make_condenser_arcs()
self._make_reboiler_arcs()
TransformationFactory("network.expand_arcs").apply_to(self)
def _make_rectification_arcs(self):
self._rectification_stream_index = RangeSet(
1, self.config.feed_tray_location - 2)
def rule_liq_stream(self, i):
return {
"source": self.rectification_section[i].liq_out,
"destination": self.rectification_section[i + 1].liq_in
}
def rule_vap_stream(self, i):
return {
"source": self.rectification_section[i + 1].vap_out,
"destination": self.rectification_section[i].vap_in
}
self.rectification_liq_stream = Arc(self._rectification_stream_index,
rule=rule_liq_stream)
self.rectification_vap_stream = Arc(self._rectification_stream_index,
rule=rule_vap_stream)
def _make_stripping_arcs(self):
self._stripping_stream_index = RangeSet(
self.config.feed_tray_location + 1,
self.config.number_of_trays - 1)
def rule_liq_stream(self, i):
return {
"source": self.stripping_section[i].liq_out,
"destination": self.stripping_section[i + 1].liq_in
}
def rule_vap_stream(self, i):
return {
"source": self.stripping_section[i + 1].vap_out,
"destination": self.stripping_section[i].vap_in
}
self.stripping_liq_stream = Arc(self._stripping_stream_index,
rule=rule_liq_stream)
self.stripping_vap_stream = Arc(self._stripping_stream_index,
rule=rule_vap_stream)
def _make_feed_arcs(self):
self.feed_liq_in = Arc(
source=self.rectification_section[self.config.feed_tray_location -
1].liq_out,
destination=self.feed_tray.liq_in)
self.feed_liq_out = Arc(
source=self.feed_tray.liq_out,
destination=self.stripping_section[self.config.feed_tray_location +
1].liq_in)
self.feed_vap_in = Arc(
source=self.stripping_section[self.config.feed_tray_location +
1].vap_out,
destination=self.feed_tray.vap_in)
self.feed_vap_out = Arc(source=self.feed_tray.vap_out,
destination=self.rectification_section[
self.config.feed_tray_location - 1].vap_in)
def _make_condenser_arcs(self):
self.condenser_vap_in = Arc(
source=self.rectification_section[1].vap_out,
destination=self.condenser.inlet)
self.condenser_reflux_out = Arc(
source=self.condenser.reflux,
destination=self.rectification_section[1].liq_in)
def _make_reboiler_arcs(self):
self.reboiler_liq_in = Arc(
source=self.stripping_section[self.config.number_of_trays].liq_out,
destination=self.reboiler.inlet)
self.reboiler_vap_out = Arc(source=self.reboiler.vapor_reboil,
destination=self.stripping_section[
self.config.number_of_trays].vap_in)
def propagate_stream_state(self, source=None, destination=None):
"""
This method is used during initialization to propage state values
between any two ports.
Args:
source : source port
destination : destination port
"""
for v in source.vars:
for i in destination.vars[v]:
if not destination.vars[v][i].fixed:
destination.vars[v][i].value = \
value(source.vars[v][i])
def initialize(self,
state_args_feed=None,
state_args_liq=None,
state_args_vap=None,
solver=None,
optarg=None,
outlvl=idaeslog.NOTSET):
init_log = idaeslog.getInitLogger(self.name, outlvl, tag="unit")
solve_log = idaeslog.getSolveLogger(self.name, outlvl, tag="unit")
init_log.info("Begin initialization.")
solverobj = get_solver(solver, optarg)
feed_flags = self.feed_tray.initialize(solver=solver,
optarg=optarg,
outlvl=outlvl)
self.propagate_stream_state(source=self.feed_tray.vap_out,
destination=self.condenser.inlet)
self.condenser.initialize(solver=solver, optarg=optarg, outlvl=outlvl)
self.propagate_stream_state(source=self.feed_tray.liq_out,
destination=self.reboiler.inlet)
self.reboiler.initialize(solver=solver, optarg=optarg, outlvl=outlvl)
# initialize the rectification section
for i in self._rectification_index:
self.propagate_stream_state(
source=self.condenser.reflux,
destination=self.rectification_section[i].liq_in)
self.propagate_stream_state(
source=self.feed_tray.vap_out,
destination=self.rectification_section[i].vap_in)
if i == 1:
rect_liq_flags = self.rectification_section[i]. \
initialize(hold_state_liq=True,
hold_state_vap=False,
solver=solver,
optarg=optarg,
outlvl=outlvl)
elif i == len(self._rectification_index):
rect_vap_flags = \
self.rectification_section[i]. \
initialize(hold_state_liq=False,
hold_state_vap=True,
solver=solver,
optarg=optarg,
outlvl=outlvl)
else:
self.rectification_section[i].initialize(solver=solver,
optarg=optarg,
outlvl=outlvl)
# initialize the stripping section
for i in self._stripping_index:
self.propagate_stream_state(
source=self.feed_tray.liq_out,
destination=self.stripping_section[i].liq_in)
self.propagate_stream_state(
source=self.reboiler.vapor_reboil,
destination=self.stripping_section[i].vap_in)
if i == self.config.feed_tray_location + 1:
strip_liq_flags = self.stripping_section[i]. \
initialize(hold_state_liq=True,
hold_state_vap=False,
solver=solver,
optarg=optarg,
outlvl=outlvl)
elif i == self.config.number_of_trays:
strip_vap_flags = self.stripping_section[i]. \
initialize(hold_state_liq=False,
hold_state_vap=True,
solver=solver,
optarg=optarg,
outlvl=outlvl)
else:
self.stripping_section[i].initialize(solver=None,
optarg=optarg,
outlvl=outlvl)
# For initialization purposes and to enable solving individual sections
# creating a temp block. Note that this temp block is a reference to
# the rectification, stripping, and feed sections. Also, expanded arcs
# are added to the temp block as the initialization solve proceeds.
self._temp_block = Block()
self._temp_block.rectification = Block()
# adding reference to the rectification section and the expanded
# vapor and liquid arcs
self._temp_block.rectification.trays = Reference(
self.rectification_section)
self._temp_block.rectification.expanded_liq_stream = Reference(
self.rectification_liq_stream[:].expanded_block)
self._temp_block.rectification.expanded_vap_stream = Reference(
self.rectification_vap_stream[:].expanded_block)
with idaeslog.solver_log(solve_log, idaeslog.DEBUG) as slc:
res = solverobj.solve(self._temp_block.rectification, tee=slc.tee)
init_log.info("Rectification section initialization status {}.".format(
idaeslog.condition(res)))
self._temp_block.stripping = Block()
# adding reference to the stripping section and the expanded
# vapor and liquid arcs
self._temp_block.stripping.trays = Reference(self.stripping_section)
self._temp_block.stripping.expanded_liq_stream = Reference(
self.stripping_liq_stream[:].expanded_block)
self._temp_block.stripping.expanded_vap_stream = Reference(
self.stripping_vap_stream[:].expanded_block)
with idaeslog.solver_log(solve_log, idaeslog.DEBUG) as slc:
res = solverobj.solve(self._temp_block.stripping, tee=slc.tee)
init_log.info("Stripping section initialization status {}.".format(
idaeslog.condition(res)))
# releasing the fixed inlets for the vap in to the rectification
# to enable connection with the feed tray vap out
self.rectification_section[len(self._rectification_index)]. \
properties_in_vap. \
release_state(flags=rect_vap_flags, outlvl=outlvl)
# releasing the fixed inlets for the liq in to the stripping
# to enable connection with the feed tray liq out
self.stripping_section[self.config.feed_tray_location + 1]. \
properties_in_liq. \
release_state(flags=strip_liq_flags, outlvl=outlvl)
# Adding the feed tray to temp block solve
self._temp_block.feed_tray = Reference(self.feed_tray)
self._temp_block.expanded_feed_liq_stream_in = Reference(
self.feed_liq_in.expanded_block)
self._temp_block.expanded_feed_liq_stream_out = Reference(
self.feed_liq_out.expanded_block)
self._temp_block.expanded_feed_vap_stream_in = Reference(
self.feed_vap_in.expanded_block)
self._temp_block.expanded_feed_vap_stream_out = Reference(
self.feed_vap_out.expanded_block)
with idaeslog.solver_log(solve_log, idaeslog.DEBUG) as slc:
res = solverobj.solve(self._temp_block, tee=slc.tee)
init_log.info("Column section initialization status {}.".format(
idaeslog.condition(res)))
self.rectification_section[1]. \
properties_in_liq. \
release_state(flags=rect_liq_flags, outlvl=outlvl)
# Adding the condenser to the temp block solve
self._temp_block.condenser = Reference(self.condenser)
self._temp_block.expanded_condenser_vap_in = Reference(
self.condenser_vap_in.expanded_block)
self._temp_block.expanded_condenser_reflux_out = Reference(
self.condenser_reflux_out.expanded_block)
with idaeslog.solver_log(solve_log, idaeslog.DEBUG) as slc:
res = solverobj.solve(self._temp_block, tee=slc.tee)
init_log.info(
"Column section + Condenser initialization status {}.".format(
idaeslog.condition(res)))
self.stripping_section[self.config.number_of_trays]. \
properties_in_vap. \
release_state(flags=strip_vap_flags, outlvl=outlvl)
# Delete the _temp_block as next solve is solving the entire column.
# If we add the reboiler to the temp block, it will be similar to
# solving the original block. This ensures that if
# initialize is triggered twice, there is no implicit replacing
# component error.
self.del_component(self._temp_block)
with idaeslog.solver_log(solve_log, idaeslog.DEBUG) as slc:
res = solverobj.solve(self, tee=slc.tee)
init_log.info(
"Column section + Condenser + Reboiler initialization status {}.".
format(idaeslog.condition(res)))
# release feed tray state once initialization is complete
self.feed_tray.properties_in_feed.\
release_state(flags=feed_flags, outlvl=outlvl)
class TrayColumnData(UnitModelBlockData):
"""
Tray Column model.
"""
CONFIG = ConfigBlock()
CONFIG.declare(
"dynamic",
ConfigValue(domain=In([False]),
default=False,
description="Dynamic model flag - must be False",
doc="""Indicates whether this model will be dynamic or not,
**default** = False. Tray column units do not support dynamic behavior."""))
CONFIG.declare(
"has_holdup",
ConfigValue(
default=False,
domain=In([False]),
description="Holdup construction flag - must be False",
doc="""Indicates whether holdup terms should be constructed or not.
**default** - False. Tray column units do not have defined volume, thus
this must be False."""))
CONFIG.declare(
"number_of_trays",
ConfigValue(default=None,
domain=In(Integers),
description="Number of trays in the column",
doc="""Indicates the number of trays to be constructed.
**default** - None.
**Valid values:** {
Must be integer number.}"""))
CONFIG.declare(
"feed_tray_location",
ConfigValue(default=None,
domain=In(Integers),
description="Feed tray location in the column",
doc="""Indicates the number of trays to be constructed.
**default** - None.
**Valid values:** {
Must be integer number.}"""))
CONFIG.declare(
"condenser_type",
ConfigValue(
default=CondenserType.totalCondenser,
domain=In(CondenserType),
description="Type of condenser flag",
doc="""Indicates what type of condenser should be constructed,
**default** - CondenserType.totalCondenser.
**Valid values:** {
**CondenserType.totalCondenser** - Incoming vapor from top tray is condensed
to all liquid,
**CondenserType.partialCondenser** - Incoming vapor from top tray is
partially condensed to a vapor and liquid stream.}"""))
CONFIG.declare(
"condenser_temperature_spec",
ConfigValue(default=None,
domain=In(TemperatureSpec),
description="Temperature spec for the condenser",
doc="""Temperature specification for the condenser,
**default** - TemperatureSpec.none
**Valid values:** {
**TemperatureSpec.none** - No spec is selected,
**TemperatureSpec.atBubblePoint** - Condenser temperature set at
bubble point i.e. total condenser,
**TemperatureSpec.customTemperature** - Condenser temperature at
user specified temperature.}"""))
CONFIG.declare(
"has_heat_transfer",
ConfigValue(default=False,
domain=In([True, False]),
description="heat duty to/from tray construction flag.",
doc="""indicates if there is heat duty to/from the tray,
**default** - False.
**Valid values:** {
**True** - include a heat duty term,
**False** - exclude a heat duty term.}"""))
CONFIG.declare(
"has_pressure_change",
ConfigValue(
default=False,
domain=In([True, False]),
description="pressure change term construction flag",
doc="""indicates whether terms for pressure change should be
constructed,
**default** - False.
**Valid values:** {
**True** - include pressure change terms,
**False** - exclude pressure change terms.}"""))
CONFIG.declare(
"has_liquid_side_draw",
ConfigValue(
default=False,
domain=In([True, False]),
description="liquid side draw construction flag.",
doc="""indicates if there is a liquid side draw from all trays,
**default** - False.
**Valid values:** {
**True** - include a liquid side draw for all trays,
**False** - exclude a liquid side draw for all trays.}"""))
CONFIG.declare(
"has_vapor_side_draw",
ConfigValue(
default=False,
domain=In([True, False]),
description="vapor side draw construction flag.",
doc="""indicates if there is a vapor side draw from all trays,
**default** - False.
**Valid values:** {
**True** - include a vapor side draw for all trays,
**False** - exclude a vapor side draw for all trays.}"""))
CONFIG.declare(
"property_package",
ConfigValue(
default=useDefault,
domain=is_physical_parameter_block,
description="property package to use for control volume",
doc=
"""property parameter object used to define property calculations,
**default** - useDefault.
**Valid values:** {
**useDefault** - use default package from parent model or flowsheet,
**PropertyParameterObject** - a PropertyParameterBlock object.}"""))
CONFIG.declare(
"property_package_args",
ConfigBlock(
implicit=True,
description="arguments to use for constructing property packages",
doc=
"""a ConfigBlock with arguments to be passed to a property block(s)
and used when constructing these,
**default** - None.
**Valid values:** {
see property package for documentation.}"""))
def build(self):
"""Build the model.
Args:
None
Returns:
None
"""
# Call UnitModel.build to setup dynamics
super(TrayColumnData, self).build()
# Create set for constructing indexed trays
if self.config.number_of_trays is not None:
self.tray_index = RangeSet(1, self.config.number_of_trays)
else:
raise ConfigurationError("The config argument number_of_trays "
"needs to specified and cannot be None.")
# Add trays
# TODO:
# 1. Add support for multiple feed tray locations
# 2. Add support for specifying which trays have side draws
self.tray = Tray(self.tray_index,
default={
"has_liquid_side_draw":
self.config.has_liquid_side_draw,
"has_vapor_side_draw":
self.config.has_vapor_side_draw,
"has_heat_transfer":
self.config.has_heat_transfer,
"has_pressure_change":
self.config.has_pressure_change,
"property_package":
self.config.property_package,
"property_package_args":
self.config.property_package_args
},
initialize={
self.config.feed_tray_location: {
"is_feed_tray":
True,
"has_liquid_side_draw":
self.config.has_liquid_side_draw,
"has_vapor_side_draw":
self.config.has_vapor_side_draw,
"has_heat_transfer":
self.config.has_heat_transfer,
"has_pressure_change":
self.config.has_pressure_change,
"property_package":
self.config.property_package,
"property_package_args":
self.config.property_package_args
}
})
# Add condenser
self.condenser = Condenser(
default={
"condenser_type": self.config.condenser_type,
"temperature_spec": self.config.condenser_temperature_spec,
"property_package": self.config.property_package,
"property_package_args": self.config.property_package_args
})
# Add reboiler
self.reboiler = Reboiler(
default={
"has_boilup_ratio": True,
"has_pressure_change": self.config.has_pressure_change,
"property_package": self.config.property_package,
"property_package_args": self.config.property_package_args
})
# Add extension to the feed port
self.feed = Port(
extends=self.tray[self.config.feed_tray_location].feed)
# Construct arcs between trays, condenser, and reboiler
self._make_arcs()
TransformationFactory("network.expand_arcs").apply_to(self)
def _make_arcs(self):
# make arcs
self.liq_stream_index = RangeSet(0, self.config.number_of_trays)
self.vap_stream_index = RangeSet(1, self.config.number_of_trays + 1)
def rule_liq_stream(self, i):
if i == 0:
return {
"source": self.condenser.reflux,
"destination": self.tray[i + 1].liq_in
}
elif i == self.config.number_of_trays:
return {
"source": self.tray[i].liq_out,
"destination": self.reboiler.inlet
}
else:
return {
"source": self.tray[i].liq_out,
"destination": self.tray[i + 1].liq_in
}
def rule_vap_stream(self, i):
if i == 1:
return {
"source": self.tray[i].vap_out,
"destination": self.condenser.inlet
}
elif i == self.config.number_of_trays + 1:
return {
"source": self.reboiler.vapor_reboil,
"destination": self.tray[i - 1].vap_in
}
else:
return {
"source": self.tray[i].vap_out,
"destination": self.tray[i - 1].vap_in
}
self.liq_stream = Arc(self.liq_stream_index, rule=rule_liq_stream)
self.vap_stream = Arc(self.vap_stream_index, rule=rule_vap_stream)
def propagate_stream_state(self, source=None, destination=None):
"""
This method is used during initialization to propage state values
between any two ports.
Args:
source : source port
destination : destination port
"""
for v in source.vars:
for i in destination.vars[v]:
if not destination.vars[v][i].fixed:
destination.vars[v][i].value = value(source.vars[v][i])
def initialize(self,
state_args_feed=None,
state_args_liq=None,
state_args_vap=None,
solver=None,
outlvl=idaeslog.NOTSET):
init_log = idaeslog.getInitLogger(self.name, outlvl, tag="unit")
solve_log = idaeslog.getSolveLogger(self.name, outlvl, tag="unit")
init_log.info("Begin initialization.")
if solver is None:
init_log.warning("Solver not provided. Default solver(ipopt) "
"being used for initialization.")
solver = get_default_solver()
feed_flags = self.tray[self.config.feed_tray_location].initialize()
self.propagate_stream_state(
source=self.tray[self.config.feed_tray_location].vap_out,
destination=self.condenser.inlet)
self.condenser.initialize()
self.propagate_stream_state(
source=self.tray[self.config.feed_tray_location].liq_out,
destination=self.reboiler.inlet)
self.reboiler.initialize()
for i in self.tray_index:
self.propagate_stream_state(source=self.condenser.reflux,
destination=self.tray[i].liq_in)
self.propagate_stream_state(source=self.reboiler.vapor_reboil,
destination=self.tray[i].vap_in)
self.tray[i].initialize()
with idaeslog.solver_log(solve_log, idaeslog.DEBUG) as slc:
res = solver.solve(self, tee=slc.tee)
init_log.info("Column initialization status {}.".format(
idaeslog.condition(res)))
# release feed tray state once initialization is complete
self.tray[self.config.feed_tray_location].properties_in_feed.\
release_state(flags=feed_flags, outlvl=outlvl)