def get_constraints(self):
"""
Retrieve the hardware constrains from the Pulsing device.
@return PulserConstraints: dict with constraints for the sequence
generation and GUI
"""
constraints = PulserConstraints()
# The file formats are hardware specific.
constraints.waveform_format = ['pstream']
constraints.sequence_format = []
constraints.sample_rate.min = 1e9
constraints.sample_rate.max = 1e9
constraints.sample_rate.step = 0
constraints.sample_rate.default = 1e9
constraints.d_ch_low.min = 0.0
constraints.d_ch_low.max = 0.0
constraints.d_ch_low.step = 0.0
constraints.d_ch_low.default = 0.0
constraints.d_ch_high.min = 3.3
constraints.d_ch_high.max = 3.3
constraints.d_ch_high.step = 0.0
constraints.d_ch_high.default = 3.3
# Sample file length max is not well-defined for PulseStreamer,
# which collates sequential identical pulses into one.
# Total number of not-sequentially-identical pulses which
# can be stored is 10^6.
constraints.waveform_length.min = 1
constraints.waveform_length.max = 134217728
constraints.waveform_length.step = 1
constraints.waveform_length.default = 1
# the name a_ch<num> and d_ch<num> are generic names, which describe UNAMBIGUOUSLY the
# channels. Here all possible channel configurations are stated, where only the generic
# names should be used. The names for the different configurations can be customary chosen.
activation_config = OrderedDict()
activation_config['all'] = [
'd_ch1', 'd_ch2', 'd_ch3', 'd_ch4', 'd_ch5', 'd_ch6', 'd_ch7',
'd_ch8'
]
constraints.activation_config = activation_config
return constraints
def get_constraints(self):
""" Retrieve the hardware constrains from the Pulsing device.
@return dict: dict with constraints for the sequence generation and GUI
Provides all the constraints (e.g. sample_rate, amplitude,
total_length_bins, channel_config, ...) related to the pulse generator
hardware to the caller.
The keys of the returned dictionary are the str name for the constraints
(which are set in this method). No other keys should be invented. If you
are not sure about the meaning, look in other hardware files to get an
impression. If still additional constraints are needed, then they have
to be add to all files containing this interface.
The items of the keys are again dictionaries which have the generic
dictionary form:
{'min': <value>,
'max': <value>,
'step': <value>,
'unit': '<value>'}
Only the keys 'activation_config' and differs, since it contain the
channel configuration/activation information.
If the constraints cannot be set in the pulsing hardware (because it
might e.g. has no sequence mode) then write just zero to each generic
dict. Note that there is a difference between float input (0.0) and
integer input (0).
ALL THE PRESENT KEYS OF THE CONSTRAINTS DICT MUST BE ASSIGNED!
"""
constraints = PulserConstraints()
# The file formats are hardware specific.
constraints.waveform_format = ['pstream']
constraints.sequence_format = []
constraints.sample_rate.min = 1e9
constraints.sample_rate.max = 1e9
constraints.sample_rate.step = 0
constraints.sample_rate.default = 1e9
constraints.d_ch_low.min = 0.0
constraints.d_ch_low.max = 0.0
constraints.d_ch_low.step = 0.0
constraints.d_ch_low.default = 0.0
constraints.d_ch_high.min = 3.3
constraints.d_ch_high.max = 3.3
constraints.d_ch_high.step = 0.0
constraints.d_ch_high.default = 3.3
# sample file length max is not well-defined for PulseStreamer, which collates sequential identical pulses into
# one. Total number of not-sequentially-identical pulses which can be stored: 1 M.
constraints.sampled_file_length.min = 1
constraints.sampled_file_length.max = 134217728
constraints.sampled_file_length.step = 1
constraints.sampled_file_length.default = 1
# the name a_ch<num> and d_ch<num> are generic names, which describe UNAMBIGUOUSLY the
# channels. Here all possible channel configurations are stated, where only the generic
# names should be used. The names for the different configurations can be customary chosen.
activation_config = OrderedDict()
activation_config['all'] = [
'd_ch1', 'd_ch2', 'd_ch3', 'd_ch4', 'd_ch5', 'd_ch6', 'd_ch7',
'd_ch8'
]
constraints.activation_config = activation_config
return constraints
def get_constraints(self):
"""
Retrieve the hardware constrains from the Pulsing device.
@return constraints object: object with pulser constraints as attributes.
Provides all the constraints (e.g. sample_rate, amplitude, total_length_bins,
channel_config, ...) related to the pulse generator hardware to the caller.
SEE PulserConstraints CLASS IN pulser_interface.py FOR AVAILABLE CONSTRAINTS!!!
If you are not sure about the meaning, look in other hardware files to get an impression.
If still additional constraints are needed, then they have to be added to the
PulserConstraints class.
Each scalar parameter is an ScalarConstraints object defined in cor.util.interfaces.
Essentially it contains min/max values as well as min step size, default value and unit of
the parameter.
PulserConstraints.activation_config differs, since it contain the channel
configuration/activation information of the form:
{<descriptor_str>: <channel_list>,
<descriptor_str>: <channel_list>,
...}
If the constraints cannot be set in the pulsing hardware (e.g. because it might have no
sequence mode) just leave it out so that the default is used (only zeros).
"""
constraints = PulserConstraints()
# The file formats are hardware specific.
constraints.waveform_format = ['fpga']
constraints.sequence_format = []
constraints.sample_rate.min = 500e6
constraints.sample_rate.max = 950e6
constraints.sample_rate.step = 450e6
constraints.sample_rate.default = 950e6
constraints.d_ch_low.min = 0.0
constraints.d_ch_low.max = 0.0
constraints.d_ch_low.step = 0.0
constraints.d_ch_low.default = 0.0
constraints.d_ch_high.min = 3.3
constraints.d_ch_high.max = 3.3
constraints.d_ch_high.step = 0.0
constraints.d_ch_high.default = 3.3
constraints.sampled_file_length.min = 1024
constraints.sampled_file_length.max = 134217728
constraints.sampled_file_length.step = 1
constraints.sampled_file_length.default = 1024
# the name a_ch<num> and d_ch<num> are generic names, which describe UNAMBIGUOUSLY the
# channels. Here all possible channel configurations are stated, where only the generic
# names should be used. The names for the different configurations can be customary chosen.
activation_config = OrderedDict()
activation_config['all'] = [
'd_ch1', 'd_ch2', 'd_ch3', 'd_ch4', 'd_ch5', 'd_ch6', 'd_ch7',
'd_ch8'
]
constraints.activation_config = activation_config
return constraints
def get_constraints(self):
"""
Retrieve the hardware constrains from the Pulsing device.
@return constraints object: object with pulser constraints as attributes.
Provides all the constraints (e.g. sample_rate, amplitude, total_length_bins,
channel_config, ...) related to the pulse generator hardware to the caller.
SEE PulserConstraints CLASS IN pulser_interface.py FOR AVAILABLE CONSTRAINTS!!!
If you are not sure about the meaning, look in other hardware files to get an impression.
If still additional constraints are needed, then they have to be added to the
PulserConstraints class.
Each scalar parameter is an ScalarConstraints object defined in cor.util.interfaces.
Essentially it contains min/max values as well as min step size, default value and unit of
the parameter.
PulserConstraints.activation_config differs, since it contain the channel
configuration/activation information of the form:
{<descriptor_str>: <channel_list>,
<descriptor_str>: <channel_list>,
...}
If the constraints cannot be set in the pulsing hardware (e.g. because it might have no
sequence mode) just leave it out so that the default is used (only zeros).
"""
constraints = PulserConstraints()
# The file formats are hardware specific.
constraints.waveform_format = [self.compatible_waveform_format]
constraints.sequence_format = [self.compatible_sequence_format]
if self.interleave:
constraints.sample_rate.min = 12.0e9
constraints.sample_rate.max = 24.0e9
constraints.sample_rate.step = 4.0e8
constraints.sample_rate.default = 24.0e9
else:
constraints.sample_rate.min = 10.0e6
constraints.sample_rate.max = 12.0e9
constraints.sample_rate.step = 10.0e6
constraints.sample_rate.default = 12.0e9
constraints.a_ch_amplitude.min = 0.02
constraints.a_ch_amplitude.max = 2.0
constraints.a_ch_amplitude.step = 0.001
constraints.a_ch_amplitude.default = 2.0
constraints.a_ch_offset.min = -1.0
constraints.a_ch_offset.max = 1.0
constraints.a_ch_offset.step = 0.001
constraints.a_ch_offset.default = 0.0
constraints.d_ch_low.min = -1.0
constraints.d_ch_low.max = 4.0
constraints.d_ch_low.step = 0.01
constraints.d_ch_low.default = 0.0
constraints.d_ch_high.min = 0.0
constraints.d_ch_high.max = 5.0
constraints.d_ch_high.step = 0.01
constraints.d_ch_high.default = 5.0
constraints.sampled_file_length.min = 80
constraints.sampled_file_length.max = 64800000
constraints.sampled_file_length.step = 1
constraints.sampled_file_length.default = 80
constraints.waveform_num.min = 1
constraints.waveform_num.max = 32000
constraints.waveform_num.step = 1
constraints.waveform_num.default = 1
constraints.sequence_num.min = 1
constraints.sequence_num.max = 8000
constraints.sequence_num.step = 1
constraints.sequence_num.default = 1
constraints.subsequence_num.min = 1
constraints.subsequence_num.max = 4000
constraints.subsequence_num.step = 1
constraints.subsequence_num.default = 1
# If sequencer mode is available then these should be specified
constraints.repetitions.min = 0
constraints.repetitions.max = 65539
constraints.repetitions.step = 1
constraints.repetitions.default = 0
constraints.trigger_in.min = 0
constraints.trigger_in.max = 2
constraints.trigger_in.step = 1
constraints.trigger_in.default = 0
constraints.event_jump_to.min = 0
constraints.event_jump_to.max = 8000
constraints.event_jump_to.step = 1
constraints.event_jump_to.default = 0
constraints.go_to.min = 0
constraints.go_to.max = 8000
constraints.go_to.step = 1
constraints.go_to.default = 0
# the name a_ch<num> and d_ch<num> are generic names, which describe UNAMBIGUOUSLY the
# channels. Here all possible channel configurations are stated, where only the generic
# names should be used. The names for the different configurations can be customary chosen.
activation_config = OrderedDict()
activation_config['config0'] = ['a_ch1', 'd_ch1', 'd_ch2', 'a_ch2', 'd_ch3', 'd_ch4']
activation_config['config1'] = ['a_ch2', 'd_ch1', 'd_ch2', 'a_ch3', 'd_ch3', 'd_ch4']
# Usage of channel 1 only:
activation_config['config2'] = ['a_ch2', 'd_ch1', 'd_ch2']
# Usage of channel 2 only:
activation_config['config3'] = ['a_ch3', 'd_ch3', 'd_ch4']
# Usage of Interleave mode:
activation_config['config4'] = ['a_ch1', 'd_ch1', 'd_ch2']
# Usage of only digital channels:
activation_config['config5'] = ['d_ch1', 'd_ch2', 'd_ch3', 'd_ch4', 'd_ch5', 'd_ch6',
'd_ch7', 'd_ch8']
# Usage of only one analog channel:
activation_config['config6'] = ['a_ch1']
activation_config['config7'] = ['a_ch2']
activation_config['config8'] = ['a_ch3']
# Usage of only the analog channels:
activation_config['config9'] = ['a_ch2', 'a_ch3']
constraints.activation_config = activation_config
return constraints
def get_constraints(self):
"""
Retrieve the hardware constrains from the Pulsing device.
@return constraints object: object with pulser constraints as attributes.
Provides all the constraints (e.g. sample_rate, amplitude, total_length_bins,
channel_config, ...) related to the pulse generator hardware to the caller.
SEE PulserConstraints CLASS IN pulser_interface.py FOR AVAILABLE CONSTRAINTS!!!
If you are not sure about the meaning, look in other hardware files to get an impression.
If still additional constraints are needed, then they have to be added to the
PulserConstraints class.
Each scalar parameter is an ScalarConstraints object defined in cor.util.interfaces.
Essentially it contains min/max values as well as min step size, default value and unit of
the parameter.
PulserConstraints.activation_config differs, since it contain the channel
configuration/activation information of the form:
{<descriptor_str>: <channel_list>,
<descriptor_str>: <channel_list>,
...}
If the constraints cannot be set in the pulsing hardware (e.g. because it might have no
sequence mode) just leave it out so that the default is used (only zeros).
"""
constraints = PulserConstraints()
# The file formats are hardware specific.
constraints.waveform_format = [self.compatible_waveform_format]
constraints.sequence_format = [self.compatible_sequence_format]
if self.interleave:
constraints.sample_rate.min = 12.0e9
constraints.sample_rate.max = 24.0e9
constraints.sample_rate.step = 4.0e8
constraints.sample_rate.default = 24.0e9
else:
constraints.sample_rate.min = 10.0e6
constraints.sample_rate.max = 12.0e9
constraints.sample_rate.step = 10.0e6
constraints.sample_rate.default = 12.0e9
constraints.a_ch_amplitude.min = 0.02
constraints.a_ch_amplitude.max = 2.0
constraints.a_ch_amplitude.step = 0.001
constraints.a_ch_amplitude.default = 2.0
constraints.a_ch_offset.min = -1.0
constraints.a_ch_offset.max = 1.0
constraints.a_ch_offset.step = 0.001
constraints.a_ch_offset.default = 0.0
constraints.d_ch_low.min = -1.0
constraints.d_ch_low.max = 4.0
constraints.d_ch_low.step = 0.01
constraints.d_ch_low.default = 0.0
constraints.d_ch_high.min = 0.0
constraints.d_ch_high.max = 5.0
constraints.d_ch_high.step = 0.01
constraints.d_ch_high.default = 5.0
constraints.sampled_file_length.min = 80
constraints.sampled_file_length.max = 64800000
constraints.sampled_file_length.step = 1
constraints.sampled_file_length.default = 80
constraints.waveform_num.min = 1
constraints.waveform_num.max = 32000
constraints.waveform_num.step = 1
constraints.waveform_num.default = 1
constraints.sequence_num.min = 1
constraints.sequence_num.max = 8000
constraints.sequence_num.step = 1
constraints.sequence_num.default = 1
constraints.subsequence_num.min = 1
constraints.subsequence_num.max = 4000
constraints.subsequence_num.step = 1
constraints.subsequence_num.default = 1
# If sequencer mode is available then these should be specified
constraints.repetitions.min = 0
constraints.repetitions.max = 65539
constraints.repetitions.step = 1
constraints.repetitions.default = 0
constraints.trigger_in.min = 0
constraints.trigger_in.max = 2
constraints.trigger_in.step = 1
constraints.trigger_in.default = 0
constraints.event_jump_to.min = 0
constraints.event_jump_to.max = 8000
constraints.event_jump_to.step = 1
constraints.event_jump_to.default = 0
constraints.go_to.min = 0
constraints.go_to.max = 8000
constraints.go_to.step = 1
constraints.go_to.default = 0
# the name a_ch<num> and d_ch<num> are generic names, which describe UNAMBIGUOUSLY the
# channels. Here all possible channel configurations are stated, where only the generic
# names should be used. The names for the different configurations can be customary chosen.
activation_config = OrderedDict()
activation_config['config0'] = ['a_ch1', 'd_ch1', 'd_ch2', 'a_ch2', 'd_ch3', 'd_ch4']
activation_config['config1'] = ['a_ch2', 'd_ch1', 'd_ch2', 'a_ch3', 'd_ch3', 'd_ch4']
# Usage of channel 1 only:
activation_config['config2'] = ['a_ch2', 'd_ch1', 'd_ch2']
# Usage of channel 2 only:
activation_config['config3'] = ['a_ch3', 'd_ch3', 'd_ch4']
# Usage of Interleave mode:
activation_config['config4'] = ['a_ch1', 'd_ch1', 'd_ch2']
# Usage of only digital channels:
activation_config['config5'] = ['d_ch1', 'd_ch2', 'd_ch3', 'd_ch4', 'd_ch5', 'd_ch6',
'd_ch7', 'd_ch8']
# Usage of only one analog channel:
activation_config['config6'] = ['a_ch1']
activation_config['config7'] = ['a_ch2']
activation_config['config8'] = ['a_ch3']
# Usage of only the analog channels:
activation_config['config9'] = ['a_ch2', 'a_ch3']
constraints.activation_config = activation_config
return constraints
def get_constraints(self):
""" Retrieve the hardware constrains from the Pulsing device.
@return dict: dict with constraints for the sequence generation and GUI
Provides all the constraints (e.g. sample_rate, amplitude,
total_length_bins, channel_config, ...) related to the pulse generator
hardware to the caller.
The keys of the returned dictionary are the str name for the constraints
(which are set in this method). No other keys should be invented. If you
are not sure about the meaning, look in other hardware files to get an
impression. If still additional constraints are needed, then they have
to be add to all files containing this interface.
The items of the keys are again dictionaries which have the generic
dictionary form:
{'min': <value>,
'max': <value>,
'step': <value>,
'unit': '<value>'}
Only the keys 'activation_config' and differs, since it contain the
channel configuration/activation information.
If the constraints cannot be set in the pulsing hardware (because it
might e.g. has no sequence mode) then write just zero to each generic
dict. Note that there is a difference between float input (0.0) and
integer input (0).
ALL THE PRESENT KEYS OF THE CONSTRAINTS DICT MUST BE ASSIGNED!
"""
constraints = PulserConstraints()
# The file formats are hardware specific.
constraints.waveform_format = ['pstream']
constraints.sequence_format = []
constraints.sample_rate.min = 1e9
constraints.sample_rate.max = 1e9
constraints.sample_rate.step = 0
constraints.sample_rate.default = 1e9
constraints.d_ch_low.min = 0.0
constraints.d_ch_low.max = 0.0
constraints.d_ch_low.step = 0.0
constraints.d_ch_low.default = 0.0
constraints.d_ch_high.min = 3.3
constraints.d_ch_high.max = 3.3
constraints.d_ch_high.step = 0.0
constraints.d_ch_high.default = 3.3
# sample file length max is not well-defined for PulseStreamer, which collates sequential identical pulses into
# one. Total number of not-sequentially-identical pulses which can be stored: 1 M.
constraints.waveform_length.min = 1
constraints.waveform_length.max = 134217728
constraints.waveform_length.step = 1
constraints.waveform_length.default = 1
# the name a_ch<num> and d_ch<num> are generic names, which describe UNAMBIGUOUSLY the
# channels. Here all possible channel configurations are stated, where only the generic
# names should be used. The names for the different configurations can be customary chosen.
activation_config = OrderedDict()
activation_config['all'] = ['d_ch1', 'd_ch2', 'd_ch3', 'd_ch4', 'd_ch5', 'd_ch6', 'd_ch7',
'd_ch8']
constraints.activation_config = activation_config
return constraints
def get_constraints(self):
"""
Retrieve the hardware constrains from the Pulsing device.
@return constraints object: object with pulser constraints as attributes.
Provides all the constraints (e.g. sample_rate, amplitude, total_length_bins,
channel_config, ...) related to the pulse generator hardware to the caller.
SEE PulserConstraints CLASS IN pulser_interface.py FOR AVAILABLE CONSTRAINTS!!!
If you are not sure about the meaning, look in other hardware files to get an impression.
If still additional constraints are needed, then they have to be added to the
PulserConstraints class.
Each scalar parameter is an ScalarConstraints object defined in cor.util.interfaces.
Essentially it contains min/max values as well as min step size, default value and unit of
the parameter.
PulserConstraints.activation_config differs, since it contain the channel
configuration/activation information of the form:
{<descriptor_str>: <channel_list>,
<descriptor_str>: <channel_list>,
...}
If the constraints cannot be set in the pulsing hardware (e.g. because it might have no
sequence mode) just leave it out so that the default is used (only zeros).
"""
constraints = PulserConstraints()
# The file formats are hardware specific.
constraints.waveform_format = ['fpga']
constraints.sequence_format = []
constraints.sample_rate.min = 500e6
constraints.sample_rate.max = 950e6
constraints.sample_rate.step = 450e6
constraints.sample_rate.default = 950e6
constraints.d_ch_low.min = 0.0
constraints.d_ch_low.max = 0.0
constraints.d_ch_low.step = 0.0
constraints.d_ch_low.default = 0.0
constraints.d_ch_high.min = 3.3
constraints.d_ch_high.max = 3.3
constraints.d_ch_high.step = 0.0
constraints.d_ch_high.default = 3.3
constraints.sampled_file_length.min = 1024
constraints.sampled_file_length.max = 134217728
constraints.sampled_file_length.step = 1
constraints.sampled_file_length.default = 1024
# the name a_ch<num> and d_ch<num> are generic names, which describe UNAMBIGUOUSLY the
# channels. Here all possible channel configurations are stated, where only the generic
# names should be used. The names for the different configurations can be customary chosen.
activation_config = OrderedDict()
activation_config['all'] = ['d_ch1', 'd_ch2', 'd_ch3', 'd_ch4', 'd_ch5', 'd_ch6', 'd_ch7',
'd_ch8']
constraints.activation_config = activation_config
return constraints
