def _validate_common(self, task):
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.") %
node.uuid)
if self.ipxe_enabled:
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
if self.ipxe_enabled:
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning(
'Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.',
{'node': node.uuid})
pxe_utils.validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
def _validate_common(self, task):
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# TODO(TheJulia): Once ipxe support is remove from the pxe
# interface, this can be removed.
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url
or not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
def validate_rescue(self, task):
"""Validate that the node has required properties for rescue.
:param task: a TaskManager instance with the node being checked
:raises: MissingParameterValue if node is missing one or more required
parameters
"""
pxe_utils.parse_driver_info(task.node, mode='rescue')
def validate_rescue(self, task):
"""Validate that the node has required properties for rescue.
:param task: a TaskManager instance with the node being checked
:raises: MissingParameterValue if node is missing one or more required
parameters
"""
pxe_utils.parse_driver_info(task.node, mode='rescue')
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.") %
node.uuid)
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning(
'Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.', {'node': node.uuid})
pxe.validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def _validate_common(self, task):
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.") %
node.uuid)
if self.ipxe_enabled:
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# NOTE(zer0c00l): When 'kickstart' boot option is used we need to store
# kickstart and squashfs files in http_root directory. These files
# will be eventually requested by anaconda installer during deployment
# over http(s).
if deploy_utils.get_boot_option(node) == 'kickstart':
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("'kickstart' boot option is set on the node but no HTTP "
"URL or HTTP root was specified."))
if not CONF.anaconda.default_ks_template:
raise exception.MissingParameterValue(
_("'kickstart' boot option is set on the node but no "
"default kickstart template is specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
if self.ipxe_enabled:
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning(
'Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.',
{'node': node.uuid})
pxe_utils.validate_boot_parameters_for_trusted_boot(node)
# Check if we have invalid parameters being passed which will not work
# for ramdisk configurations.
if (node.instance_info.get('image_source')
and node.instance_info.get('boot_iso')):
raise exception.InvalidParameterValue(
_("An 'image_source' and 'boot_iso' parameter may not be "
"specified at the same time."))
pxe_utils.parse_driver_info(node)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning('Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.',
{'node': node.uuid})
pxe.validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# TODO(TheJulia): Once ipxe support is remove from the pxe
# interface, this can be removed.
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url
or not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# TODO(TheJulia): Once ipxe support is remove from the pxe
# interface, this can be removed.
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url
or not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
