def updateSegment(objSegment, objPoint, objInterPoint):
"""
Return a segment with trimed to the intersection point
"""
from kernel.geoentity.segment import Segment
from kernel.geoentity.point import Point
from kernel.geoutil.geolib import Vector
objProjection = objSegment.getProjection(objPoint)
_p1, _p2 = objSegment.getEndpoints()
if not (_p1 == objInterPoint or _p2 == objInterPoint):
pickIntVect = Vector(objInterPoint, objProjection).mag()
p1IntVect = Vector(objInterPoint, _p1).mag()
if (pickIntVect == p1IntVect):
arg = {"SEGMENT_0": _p1, "SEGMENT_1": objInterPoint}
return Segment(arg)
p2IntVect = Vector(objInterPoint, _p2).mag()
if (pickIntVect == p2IntVect):
arg = {"SEGMENT_0": objInterPoint, "SEGMENT_1": _p2}
return Segment(arg)
ldist = objProjection.dist(_p1)
if ldist > objProjection.dist(_p2):
arg = {"SEGMENT_0": _p1, "SEGMENT_1": objInterPoint}
return Segment(arg)
else:
arg = {"SEGMENT_0": objInterPoint, "SEGMENT_1": _p2}
return Segment(arg)
def getProjection(self,fromPoint):
"""
get Projection of the point x,y in the line
"""
p1=self.p1
p2=self.p2
v=Vector(p1,p2)
v1=Vector(p1,fromPoint)
pjPoint=v.map(v1.point).point
return p1+pjPoint
def getProjection(self, fromPoint):
"""
get Projection of the point x,y in the line
"""
p1 = self.p1
p2 = self.p2
v = Vector(p1, p2)
v1 = Vector(p1, fromPoint)
pjPoint = v.map(v1.point).point
return p1 + pjPoint
def rotate(self, rotationPoint, angle):
"""
this method must be defined for rotation
"""
from kernel.geoutil.geolib import Vector
from kernel.geoentity.point import Point
v=Vector(rotationPoint,self)
v.rotate(angle)
p=rotationPoint+v.point
self.__x=p.x
self.__y=p.y
def rotate(self, rotationPoint, angle):
"""
this method must be defined for rotation
"""
from kernel.geoutil.geolib import Vector
from kernel.geoentity.point import Point
for key in self:
if isinstance(self[key] , Point):
v=Vector(rotationPoint,self[key] )
v.rotate(angle)
self[key]=rotationPoint+v.point
def mirror(self, mirrorRef):
"""
perform the mirror of the line
"""
if not isinstance(mirrorRef, (CLine, Segment)):
raise TypeError, "mirrorObject must be Cline Segment or a tuple of points"
#
startPoint, endPoint=self.getEndpoints()
self.center.mirror(mirrorRef)
endMirror=mirrorRef.getProjection(endPoint)
vEnd=Vector( endPoint, endMirror)
newStart=endMirror+vEnd.point
self.startAngle=Vector(self.center, newStart).absAng
def calculateTextPoint(self): # TODO : test if the position is ok
"""
calculate the text position
"""
# TODO: get text width
t=self.getDimensioLines()
p1, p2=t[0]
p1=Point(p1.x(), p1.y())
v=Vector(p1, Point(p2.x(), p2.y()))
vm=v.mag()
vm.mult(v.norm/2)
pe=p1+vm.point
return QtCore.QPointF(pe.x, pe.y)
def GetRadiusPointFromExt(self,x,y):
"""
get The intersecrion point from the line(x,y,cx,cy) and the circle
"""
_cx, _cy = self.center.getCoords()
_r = self.radius
centerPoint=Point(_cx,_cy)
outPoint=Point(x,y)
vector=Vector(outPoint,centerPoint)
vNorm=vector.norm()
newNorm=abs(vNorm-_r)
magVector=vector.mag()
magVector.mult(newNorm)
newPoint=magVector.point()
intPoint=Point(outPoint+newPoint)
return intPoint.getCoords()
def updatePreview(self, position, distance, kernelCommand):
"""
update the data at the preview item
"""
self.prepareGeometryChange() #qtCommand for update the scene
for i in range(0, len(kernelCommand.value)):
self.value[i] = self.revertToQTObject(kernelCommand.value[i])
# Assing Command Values
index = kernelCommand.valueIndex
try:
raise kernelCommand.exception[index](None)
except (ExcPoint):
self.value[index] = self.revertToQTObject(position)
except (ExcLenght, ExcInt):
if not distance or distance != None:
self.value[index] = distance
except (ExcAngle):
p1 = kernelCommand.value[0]
p2 = GeoPoint(position.x, position.y)
ang = Vector(p1, p2).absAng
if index == 3:
ang = ang - self.value[2]
self.value[index] = ang
except:
print "updatePreview: Exception not managed"
return
def polygonPoint(self):
"""
get the poligon points
"""
if self.side <= 0:
self.side = 6
deltaAngle = (math.pi * 2) / self.side
cPoint = Point(self.center.x(), self.center.y())
vPoint = Point(self.vertex.x(), self.vertex.y())
vertexVector = Vector(cPoint, vPoint)
radius = vertexVector.norm
angle = vertexVector.absAng
pol = QtGui.QPolygonF()
pFirst = None
for i in range(0, int(self.side)):
angle = deltaAngle + angle
xsP = cPoint.x + radius * math.cos(angle) * -1.0
ysP = cPoint.y + radius * math.sin(angle) * -1.0
p = QtCore.QPointF(xsP, ysP)
pol.append(p)
if not pFirst:
pFirst = p
if pFirst:
pol.append(pFirst)
return pol
def GetRadiusPointFromExt(self, x, y):
"""
get The intersecrion point from the line(x,y,cx,cy) and the circle
"""
_cx, _cy = self.center.getCoords()
_r = self.radius
centerPoint = Point(_cx, _cy)
outPoint = Point(x, y)
vector = Vector(outPoint, centerPoint)
vNorm = vector.Norm()
newNorm = abs(vNorm - _r)
magVector = vector.Mag()
magVector.Mult(newNorm)
newPoint = magVector.Point()
intPoint = Point(outPoint + newPoint)
return intPoint.getCoords()
def getDimensioLines(self):
"""
compute all the segment needed for the dimension
"""
p1p2v=Vector(self.firstPoint, self.secondPoint)
v=Vector(self.firstPoint,self.thirdPoint)
pp=self.firstPoint+p1p2v.map(v.point).point
p3ppv=Vector(pp, self.thirdPoint)
#
fp=self.firstPoint+p3ppv.point
fp=QtCore.QPointF(fp.x, fp.y*-1.0)
sp=self.secondPoint+p3ppv.point
sp=QtCore.QPointF(sp.x, sp.y*-1.0)
#
fp1=QtCore.QPointF(self.firstPoint.x, self.firstPoint.y*-1.0)
sp1=QtCore.QPointF(self.secondPoint.x, self.secondPoint.y*-1.0)
#
return [(fp, sp), (fp, fp1), (sp, sp1)]
def move(self,fromPoint, toPoint):
"""
perform the move operation
"""
from kernel.geoutil.geolib import Vector
v=Vector(fromPoint, toPoint)
p=self+v.point
self.__x=p.x
self.__y=p.y
def GetTangentPoint(self,x,y,outx,outy):
"""
Get the tangent from an axternal point
args:
x,y is a point near the circle
xout,yout is a point far from the circle
return:
a tuple(x,y,x1,xy) that define the tangent line
"""
firstPoint=Point(x,y)
fromPoint=Point(outx,outy)
twoPointDistance=self.center.dist(fromPoint)
if(twoPointDistance<self.radius):
return None,None
originPoint=Point(0.0,0.0)
tanMod=math.sqrt(pow(twoPointDistance,2)-pow(self.radius,2))
tgAngle=math.asin(self.radius/twoPointDistance)
#Compute the x versor
xPoint=Point(1.0,0.0)
xVector=Vector(originPoint,xPoint)
twoPointVector=Vector(fromPoint,self.center)
rightAngle=twoPointVector.ang(xVector)
cx,cy=self.center.getCoords()
if(outy>cy): # stupid situation
rightAngle=-rightAngle
posAngle=rightAngle+tgAngle
negAngle=rightAngle-tgAngle
# Compute the Positive Tangent
xCord=math.cos(posAngle)
yCord=math.sin(posAngle)
dirPoint=Point(xCord,yCord) # Versor that point at the tangentPoint
ver=Vector(originPoint,dirPoint)
ver.mult(tanMod)
tangVectorPoint=ver.Point()
posPoint=Point(tangVectorPoint+(outx,outy))
# Compute the Negative Tangent
xCord=math.cos(negAngle)
yCord=math.sin(negAngle)
dirPoint=Point(xCord,yCord)#Versor that point at the tangentPoint
ver=Vector(originPoint,dirPoint)
ver.mult(tanMod)
tangVectorPoint=ver.point()
negPoint=Point(tangVectorPoint+(outx,outy))
if(firstPoint.dist(posPoint)<firstPoint.dist(negPoint)):
return posPoint.getCoords()
else:
return negPoint.getCoords()
def move(self, fromPoint, toPoint):
"""
this method must be defined for moving operation
"""
from kernel.geoutil.geolib import Vector
from kernel.geoentity.point import Point
v=Vector(fromPoint, toPoint)
for key in self:
if isinstance(self[key] , Point):
self[key]+=v.point
return v.point
def getProjection(self,fromPoint):
"""
get Projection of the point x,y on the arc
"""
c=self.center
v=Vector(fromPoint,c)
if v.norm>self.radius:
a=v.absAng
pj1=Point((v.X+fromPoint.getx()-self.radius*math.cos(a)), (v.Y+fromPoint.gety()-self.radius*math.sin(a)))
pj2=Point((v.X+fromPoint.getx()+self.radius*math.cos(a)), (v.Y+fromPoint.gety()+self.radius*math.sin(a)))
return pj1 # ######################## adding return value for pj2
else:
return None
def mirror(self, mirrorRef):
"""
perform the mirror of the line
"""
from kernel.geoentity.cline import CLine
from kernel.geoentity.segment import Segment
from kernel.geoutil.geolib import Vector
if not isinstance(mirrorRef, (CLine, Segment)):
raise TypeError, "mirrorObject must be Cline Segment or a tuple of points"
#
centerMirror=mirrorRef.getProjection(self)
vCenter=Vector(self, centerMirror )
p=centerMirror+vCenter.point
self.__x, self.__y=p.getCoords()
def getAngledVector(self, segment, point):
"""
calculate the vector use
"""
pi = self.intersection[0]
p1, p2 = segment.getEndpoints()
vs1 = Vector(pi, p1)
vs2 = Vector(pi, p2)
if abs(vs1.absAng - vs2.absAng) < 0.00001:
if pi.dist(p1) > pi.dist(p2):
return Vector(pi, p1)
else:
return Vector(pi, p2)
else:
jp = segment.getProjection(point)
vj = Vector(pi, jp)
if abs(vj.absAng - vs1.absAng) < 0.00001:
return Vector(pi, p1)
else:
return Vector(pi, p2)
def vector(self):
"""
Get The vector of the CLine
"""
return Vector(self.p1, self.p2)
def vector(self):
"""
Get The vector of the Segment
"""
return Vector(self.p1, self.p2)
def GetTangentPoint(self, x, y, outx, outy):
"""
Get the tangent from an axternal point
args:
x,y is a point near the circle
xout,yout is a point far from the circle
return:
a tuple(x,y,x1,xy) that define the tangent line
"""
firstPoint = Point(x, y)
fromPoint = Point(outx, outy)
twoPointDistance = self.center.Dist(fromPoint)
if (twoPointDistance < self.radius):
return None, None
originPoint = Point(0.0, 0.0)
tanMod = math.sqrt(pow(twoPointDistance, 2) - pow(self.radius, 2))
tgAngle = math.asin(self.radius / twoPointDistance)
#Compute the x versor
xPoint = point.Point(1.0, 0.0)
xVector = Vector(originPoint, xPoint)
twoPointVector = Vector(fromPoint, self.center)
rightAngle = twoPointVector.Ang(xVector)
cx, cy = self.center.getCoords()
if (outy > cy): #stupid situation
rightAngle = -rightAngle
posAngle = rightAngle + tgAngle
negAngle = rightAngle - tgAngle
#Compute the Positive Tangent
xCord = math.cos(posAngle)
yCord = math.sin(posAngle)
dirPoint = Point(xCord, yCord) #Versor that point at the tangentPoint
ver = Vector(originPoint, dirPoint)
ver.Mult(tanMod)
tangVectorPoint = ver.Point()
posPoint = Point(tangVectorPoint + (outx, outy))
#Compute the Negative Tangent
xCord = math.cos(negAngle)
yCord = math.sin(negAngle)
dirPoint = Point(xCord, yCord) #Versor that point at the tangentPoint
ver = Vector(originPoint, dirPoint)
ver.Mult(tanMod)
tangVectorPoint = ver.Point()
negPoint = Point(tangVectorPoint + (outx, outy))
if firstPoint.Dist(posPoint) < firstPoint.Dist(negPoint):
return posPoint.getCoords()
else:
return negPoint.getCoords()
def getAngle(self):
"""
Calculate the angle based on the starting and ending point
"""
v=Vector(self.value[0], self.value[1])
return v.absAng