def _start_dnsmasq() -> None:
"""
Start dhcp and dns server for vms
"""
host = ""
bridge_routes = f"0.0.0.0/0,{config.BRIDGE_IP}"
cmd = f"{config.DNSMASQ_TOOL} " \
f"--interface={config.BRIDGE_NAME} " \
"--bind-interfaces " \
"--except-interface=lo " \
f"--pid-file={config.DNSMASQ_PID_FILE} " \
f"--dhcp-range={config.DNSMASQ_DHCP_IP_RANGE} " \
f"--dhcp-option=option:classless-static-route,{bridge_routes}"
if config.NUM_VMS > 8:
print("too many VMs")
return
for i in range(config.NUM_VMS):
mac_to_ip = f"{config.vm_get_mac(i)},{config.vm_get_ip(i)}"
cmd += f" --dhcp-host={mac_to_ip}"
print(cmd)
run.run_cmd(host, cmd)
def mount_image(file_name: str) -> None:
"""
Mount a vm image
"""
mnt_host = ""
# make sure nbd module is loaded
mod_cmd = f"{config.MODPROBE_TOOL} nbd"
run.run_ok(mnt_host, mod_cmd)
# setup network block device
nbd_cmd = f"{config.QEMU_NBD_TOOL} --connect={config.QEMU_IMG_NBD_DEV} " \
f"{file_name}"
print(f"Creating nbd {config.QEMU_IMG_NBD_DEV}")
run.run_background(mnt_host, nbd_cmd)
# make sure nbd partition is ready
run.run_try(mnt_host, f"{config.LS_TOOL} {config.QEMU_IMG_NBD_PART}", 10)
# make sure mount directory exists
mnt_dir = config.QEMU_IMG_MOUNT_DIR
mkdir_cmd = f"{config.MKDIR_TOOL} {mnt_dir}"
run.run_ok(mnt_host, mkdir_cmd)
# mount nbd partition
mnt_cmd = f"{config.MOUNT_TOOL} {config.QEMU_IMG_NBD_PART} {mnt_dir}"
print(f"Mounting partition {config.QEMU_IMG_NBD_PART}")
run.run_cmd(mnt_host, mnt_cmd)
def _create_if_down_script() -> None:
"""
Create if down script for vm
"""
host = ""
# create script
script = f"""#!/bin/bash
IP={config.IP_TOOL}
TAP=\\$1
# remove tap interface from bridge
\\$IP link set \\"\\$TAP\\" nomaster
\\$IP link set \\"\\$TAP\\" promisc off
\\$IP link set \\"\\$TAP\\" down
"""
cat_cmd = f"{config.CAT_TOOL} <<-\\\"EOF\\\" > " \
f"{config.VM_IF_DOWN_SCRIPT}\n{script}EOF"
run.run_cmd(host, cat_cmd)
# make script executable
chmod_cmd = f"{config.CHMOD_TOOL} +x {config.VM_IF_DOWN_SCRIPT}"
run.run_cmd(host, chmod_cmd)
def _create_if_up_script() -> None:
"""
Create if up script for vm
"""
host = ""
# create script
script = f"""#!/bin/bash
IP={config.IP_TOOL}
BRIDGE={config.BRIDGE_NAME}
TAP=\\$1
# add tap interface to bridge
\\$IP link set \\"\\$TAP\\" up
\\$IP link set \\"\\$TAP\\" promisc on
\\$IP link set \\"\\$TAP\\" master \\$BRIDGE
"""
cat_cmd = f"{config.CAT_TOOL} <<-\\\"EOF\\\" > " \
f"{config.VM_IF_UP_SCRIPT}\n{script}EOF"
run.run_cmd(host, cat_cmd)
# make script executable
chmod_cmd = f"{config.CHMOD_TOOL} +x {config.VM_IF_UP_SCRIPT}"
run.run_cmd(host, chmod_cmd)
def _stop_dnsmasq() -> None:
"""
Stop dhcp and dns server for vms
"""
host = ""
cmd = f"{config.KILL_TOOL} $({config.CAT_TOOL} {config.DNSMASQ_PID_FILE})"
run.run_cmd(host, cmd)
def _remove_vm_sockfile(vm_id: int) -> None:
"""
Delete sockfile of vm
"""
host = ""
vm_sock = config.vm_get_sockfile(vm_id)
cmd = f"{config.RM_TOOL} {vm_sock}"
run.run_cmd(host, cmd)
def quit_vm(vm_id: int) -> None:
"""
Quit a VM (force stop)
"""
host = ""
vm_sock = config.vm_get_sockfile(vm_id)
if run.run_ok(host, f"{config.LS_TOOL} {vm_sock}"):
cmd = f"{config.ECHO_TOOL} \"quit\" | nc -U \"{vm_sock}\""
run.run_cmd(host, cmd)
_remove_vm_sockfile(vm_id)
def stop_vm(vm_id: int) -> None:
"""
Stop a VM
"""
host = ""
vm_sock = config.vm_get_sockfile(vm_id)
if run.run_ok(host, f"{config.LS_TOOL} {vm_sock}"):
cmd = f"{config.ECHO_TOOL} \"system_powerdown\" | nc -U \"{vm_sock}\""
run.run_cmd(host, cmd)
_remove_vm_sockfile(vm_id)
def create_vm_image(vm_id: int) -> None:
"""
Create a vm image that is based on a base image
"""
image_host = ""
file_format = "qcow2"
base_image = config.qemu_get_base_image()
file_name = config.qemu_get_vm_image(vm_id)
image_cmd = f"{config.QEMU_IMG_TOOL} create -f {file_format} " \
f"-b {base_image} {file_name}"
run.run_cmd(image_host, image_cmd)
def _start_nat() -> None:
"""
Start nat for vms
"""
host = ""
# enable ip forwarding
fwd_cmd = f"{config.SYSCTL_TOOL} " \
f"net.ipv4.conf.{config.BRIDGE_NAME}.forwarding=1"
run.run_cmd(host, fwd_cmd)
# enable nat
prefix = f"{config.BRIDGE_IP_NET}/{config.BRIDGE_IP_PREFIX_LEN}"
masq_cmd = f"{config.IPTABLES_TOOL} -t nat -A POSTROUTING -s {prefix} " \
"-j MASQUERADE"
run.run_cmd(host, masq_cmd)
out_cmd = f"{config.IPTABLES_TOOL} -A FORWARD -m conntrack " \
f"--ctstate RELATED,ESTABLISHED -o {config.BRIDGE_NAME} -d {prefix} " \
"-j ACCEPT"
run.run_cmd(host, out_cmd)
in_cmd = f"{config.IPTABLES_TOOL} -A FORWARD -i {config.BRIDGE_NAME} " \
f"-s {prefix} -j ACCEPT"
run.run_cmd(host, in_cmd)
def umount_image() -> None:
"""
Unmount a vm image
"""
mnt_host = ""
# umount nbd partition
mnt_dir = config.QEMU_IMG_MOUNT_DIR
mnt_cmd = f"{config.UMOUNT_TOOL} {mnt_dir}"
print(f"Umounting dir {mnt_dir}")
run.run_cmd(mnt_host, mnt_cmd)
# close network block device
nbd_cmd = f"{config.QEMU_NBD_TOOL} --disconnect {config.QEMU_IMG_NBD_DEV}"
print(f"Disconnecting nbd {config.QEMU_IMG_NBD_DEV}")
run.run_cmd(mnt_host, nbd_cmd)
def create_base_image() -> None:
"""
Create a base vm image
"""
image_host = ""
file_name = config.qemu_get_base_image()
# stop if file already exists
if run.run_ok(image_host, f"{config.LS_TOOL} {file_name}"):
print("File already exists")
return
file_format = "qcow2"
file_size = config.QEMU_IMG_SIZE
image_cmd = f"{config.QEMU_IMG_TOOL} create -f {file_format} " \
f"{file_name} {file_size}"
run.run_cmd(image_host, image_cmd)
def build() -> None:
"""
Build kernel
"""
build_host = ""
build_cmd = f"make -j{config.BUILDJOBS} tarxz-pkg"
output = run.run_cmd(build_host, build_cmd)
# get name of file from output
parts = output.split()
if parts:
# get file name and extract kernel version from filename
file_name = parts[-1]
version = "-".join(file_name.split("-")[1:-1])
print("Built kernel version:", version)
print("Saved kernel in file:", file_name)
def _start_bridge() -> None:
"""
Start vm network bridge
"""
host = ""
# add bridge device
add_cmd = f"{config.IP_TOOL} link add name {config.BRIDGE_NAME} " \
"type bridge"
run.run_cmd(host, add_cmd)
# make sure bridge device is up
up_cmd = f"{config.IP_TOOL} link set {config.BRIDGE_NAME} up"
run.run_cmd(host, up_cmd)
# set promiscuous mode on bridge device
promisc_cmd = f"{config.IP_TOOL} link set {config.BRIDGE_NAME} promisc on"
run.run_cmd(host, promisc_cmd)
# set ip address on bridge device
ip_cmd = f"{config.IP_TOOL} address add {config.BRIDGE_IP}/" \
f"{config.BRIDGE_IP_PREFIX_LEN} dev {config.BRIDGE_NAME}"
run.run_cmd(host, ip_cmd)
def _stop_bridge() -> None:
"""
Stop vm network bridge
"""
host = ""
# remove ip from bridge device
ip_cmd = f"{config.IP_TOOL} address del {config.BRIDGE_IP}/" \
f"{config.BRIDGE_IP_PREFIX_LEN} dev {config.BRIDGE_NAME}"
run.run_cmd(host, ip_cmd)
# turn promiscuous mode of on bridge device
promisc_cmd = f"{config.IP_TOOL} link set {config.BRIDGE_NAME} promisc off"
run.run_cmd(host, promisc_cmd)
# set bridge down
down_cmd = f"{config.IP_TOOL} link set {config.BRIDGE_NAME} down"
run.run_cmd(host, down_cmd)
# remove bridge device
del_cmd = f"{config.IP_TOOL} link del name {config.BRIDGE_NAME} " \
"type bridge"
run.run_cmd(host, del_cmd)
def _install_sub_image_kernel(kernel_version: str) -> None:
"""
Install kernel in sub image
"""
mount_dir = config.QEMU_IMG_MOUNT_DIR
install_host = ""
# extract kernel archive to mounted vm image
kernel_archive = f"linux-{kernel_version}-x86.tar.xz"
cmd = f"{config.TAR_TOOL} xvfJ {kernel_archive} -C {mount_dir}"
run.run_cmd(install_host, cmd)
# rename/copy installed kernel
cmd = f"{config.CP_TOOL} {mount_dir}/boot/vmlinuz-{kernel_version} " \
f"{mount_dir}{config.INSTALL_DEST_KERNEL}"
run.run_cmd(install_host, cmd)
# create initramfs for kernel
cmd = f"{config.MKINITCPIO_TOOL} " \
f"-g {mount_dir}{config.INSTALL_DEST_INITRD} " \
f"-k {kernel_version} -r {mount_dir} -S autodetect"
run.run_cmd(install_host, cmd)
