def tightgrid(input, output, space, gridsize, panelsize, tabwidth, tabheight, vcuts,
mousebites, radius, sourcearea, vcutcurves, htabs, vtabs, rotation, slotwidth):
"""
Create a regular panel placed in a frame by milling a slot around the
boards' perimeters.
"""
try:
panel = Panel()
rows, cols = gridsize
if sourcearea[0]:
sourcearea = wxRectMM(*sourcearea)
else:
sourcearea = None
w, h = panelsize
if 2 * radius > 1.1 * slotwidth:
raise RuntimeError("The slot is too narrow for given radius (it has to be at least 10% larger")
psize, cuts = panel.makeTightGrid(input, rows, cols, wxPointMM(50, 50),
verSpace=fromMm(space), horSpace=fromMm(space),
slotWidth=fromMm(slotwidth), width=fromMm(w), height=fromMm(h),
sourceArea=sourcearea, tolerance=fromMm(5),
verTabWidth=fromMm(tabwidth), horTabWidth=fromMm(tabheight),
verTabCount=htabs, horTabCount=vtabs, rotation=fromDegrees(rotation))
if vcuts:
panel.makeVCuts(cuts, vcutcurves)
if mousebites[0]:
drill, spacing, offset = mousebites
panel.makeMouseBites(cuts, fromMm(drill), fromMm(spacing), fromMm(offset))
panel.addMillFillets(fromMm(radius))
panel.save(output)
except Exception as e:
sys.stderr.write("An error occurred: " + str(e) + "\n")
sys.stderr.write("No output files produced\n")
sys.exit(1)
def tightgrid(input, output, space, gridsize, panelsize, tabwidth, tabheight, vcuts,
mousebites, radius, sourcearea, vcutcurves, htabs, vtabs, rotation, slotwidth,
tolerance, renamenet, renameref, tabsfrom, copperfill, fiducials, tooling):
"""
Create a regular panel placed in a frame by milling a slot around the
boards' perimeters.
"""
# Hide the import in the function to make KiKit start faster
from kikit.panelize import Panel, fromMm, wxPointMM, wxRectMM, fromDegrees
import sys
try:
panel = Panel()
panel.inheritDesignSettings(input)
panel.inheritProperties(input)
rows, cols = gridsize
if rows == -1 or cols == -1:
raise RuntimeError("Gridsize is mandatory. Please specify the --gridsize option.")
if sourcearea[0]:
sourcearea = wxRectMM(*sourcearea)
else:
sourcearea = None
w, h = panelsize
validateSpaceRadius(space, radius)
if 2 * radius > 1.1 * slotwidth:
raise RuntimeError("The slot is too narrow for given radius (it has to be at least 10% larger")
tolerance = fromMm(tolerance)
psize, cuts = panel.makeTightGrid(input, rows, cols, wxPointMM(50, 50),
verSpace=fromMm(space), horSpace=fromMm(space),
slotWidth=fromMm(slotwidth), width=fromMm(w), height=fromMm(h),
sourceArea=sourcearea, tolerance=tolerance,
verTabWidth=fromMm(tabwidth), horTabWidth=fromMm(tabheight),
verTabCount=htabs, horTabCount=vtabs, rotation=fromDegrees(rotation),
netRenamePattern=renamenet, refRenamePattern=renameref)
tabs = []
for layer, width in tabsfrom:
tab, cut = panel.layerToTabs(layer, fromMm(width))
cuts += cut
tabs += tab
panel.appendSubstrate(tabs)
panel.addMillFillets(fromMm(radius))
if vcuts:
panel.makeVCuts(cuts, vcutcurves)
if fiducials[0] is not None:
hOffset, vOffset, copperDia, openingDia = tuple(map(fromMm, fiducials))
panel.addFiducials(hOffset, vOffset, copperDia, openingDia)
if tooling[0] is not None:
hOffset, vOffset, dia = tuple(map(fromMm, tooling))
panel.addTooling(hOffset, vOffset, dia)
if mousebites[0]:
drill, spacing, offset = mousebites
panel.makeMouseBites(cuts, fromMm(drill), fromMm(spacing), fromMm(offset))
if copperfill:
panel.copperFillNonBoardAreas()
panel.save(output)
except Exception as e:
sys.stderr.write("An error occurred: " + str(e) + "\n")
sys.stderr.write("No output files produced\n")
sys.exit(1)
def tightgrid(input, output, space, gridsize, panelsize, tabwidth, tabheight, vcuts,
mousebites, radius, sourcearea, vcutcurves, htabs, vtabs, rotation, slotwidth,
tolerance, renamenet, renameref, tabsfrom):
"""
Create a regular panel placed in a frame by milling a slot around the
boards' perimeters.
"""
try:
panel = Panel()
rows, cols = gridsize
if rows == -1 or cols == -1:
raise RuntimeError("Gridsize is mandatory. Please specify the --gridsize option.")
if sourcearea[0]:
sourcearea = wxRectMM(*sourcearea)
else:
sourcearea = None
w, h = panelsize
validateSpaceRadius(space, radius)
if 2 * radius > 1.1 * slotwidth:
raise RuntimeError("The slot is too narrow for given radius (it has to be at least 10% larger")
tolerance = fromMm(tolerance)
psize, cuts = panel.makeTightGrid(input, rows, cols, wxPointMM(50, 50),
verSpace=fromMm(space), horSpace=fromMm(space),
slotWidth=fromMm(slotwidth), width=fromMm(w), height=fromMm(h),
sourceArea=sourcearea, tolerance=tolerance,
verTabWidth=fromMm(tabwidth), horTabWidth=fromMm(tabheight),
verTabCount=htabs, horTabCount=vtabs, rotation=fromDegrees(rotation),
netRenamePattern=renamenet, refRenamePattern=renameref)
tabs = []
for layer, width in tabsfrom:
tab, cut = panel.layerToTabs(layer, fromMm(width))
cuts += cut
tabs += tab
panel.appendSubstrate(tabs)
panel.addMillFillets(fromMm(radius))
if vcuts:
panel.makeVCuts(cuts, vcutcurves)
if mousebites[0]:
drill, spacing, offset = mousebites
panel.makeMouseBites(cuts, fromMm(drill), fromMm(spacing), fromMm(offset))
panel.save(output)
except Exception as e:
sys.stderr.write("An error occurred: " + str(e) + "\n")
sys.stderr.write("No output files produced\n")
sys.exit(1)