class FabriceSpineRig(FabriceSpine):
"""Fabrice Spine Component"""
def __init__(self, name="spine", parent=None):
Profiler.getInstance().push("Construct Spine Rig Component:" + name)
super(FabriceSpineRig, self).__init__(name, parent)
# =========
# Controls
# =========
# COG
self.cogCtrlSpace = CtrlSpace('cog', parent=self.ctrlCmpGrp)
self.cogCtrl = Control('cog', parent=self.cogCtrlSpace, shape="circle")
self.cogCtrl.rotatePoints(90, 0, 0)
self.cogCtrl.scalePoints(Vec3(3.0, 3.0, 3.0))
self.cogCtrl.translatePoints(Vec3(0.0, 0.0, 0.2))
self.cogCtrl.lockScale(x=True, y=True, z=True)
self.cogCtrl.setColor("orange")
# Spine Base
self.spineBaseCtrlSpace = CtrlSpace('spineBase', parent=self.cogCtrl)
self.spineBaseCtrl = Control('spineBase',
parent=self.spineBaseCtrlSpace,
shape="pin")
self.spineBaseCtrl.rotatePoints(90, 0, 0)
self.spineBaseCtrl.translatePoints(Vec3(0, 1.0, 0))
self.spineBaseCtrl.lockScale(x=True, y=True, z=True)
# Spine Base Handle
self.spineBaseHandleCtrlSpace = CtrlSpace('spineBaseHandle',
parent=self.spineBaseCtrl)
self.spineBaseHandleCtrl = Control(
'spineBaseHandle',
parent=self.spineBaseHandleCtrlSpace,
shape="pin")
self.spineBaseHandleCtrl.rotatePoints(90, 0, 0)
self.spineBaseHandleCtrl.translatePoints(Vec3(0, 1.0, 0))
self.spineBaseHandleCtrl.lockScale(x=True, y=True, z=True)
self.spineBaseHandleCtrl.setColor("orange")
# Spine End
self.spineEndCtrlSpace = CtrlSpace('spineEnd', parent=self.cogCtrl)
self.spineEndCtrl = Control('spineEnd',
parent=self.spineEndCtrlSpace,
shape="pin")
self.spineEndCtrl.rotatePoints(90, 0, 0)
self.spineEndCtrl.lockScale(x=True, y=True, z=True)
self.spineEndCtrl.translatePoints(Vec3(0, 1.0, 0))
# Spine End Handle
self.spineEndHandleCtrlSpace = CtrlSpace('spineEndHandle',
parent=self.spineEndCtrl)
self.spineEndHandleCtrl = Control('spineEndHandle',
parent=self.spineEndHandleCtrlSpace,
shape="pin")
self.spineEndHandleCtrl.rotatePoints(90, 0, 0)
self.spineEndHandleCtrl.translatePoints(Vec3(0, 1.0, 0))
self.spineEndHandleCtrl.lockScale(x=True, y=True, z=True)
self.spineEndHandleCtrl.setColor("orange")
# ==========
# Deformers
# ==========
deformersLayer = self.getOrCreateLayer('deformers')
self.defCmpGrp = ComponentGroup(self.getName(),
self,
parent=deformersLayer)
self.chestDef = Joint('chest', parent=self.defCmpGrp)
self.chestDef.setComponent(self)
self.deformerJoints = []
self.spineOutputs = []
self.setNumDeformers(1)
# =====================
# Create Component I/O
# =====================
# Setup component Xfo I/O's
self.spineVertebraeOutput.setTarget(self.spineOutputs)
# =====================
# Constraint Deformers
# =====================
self.chestDefConstraint = PoseConstraint('_'.join(
[self.chestDef.getName(), 'To',
self.spineBaseOutputTgt.getName()]))
self.chestDefConstraint.addConstrainer(self.spineBaseOutputTgt)
self.chestDef.addConstraint(self.chestDefConstraint)
# ==============
# Constrain I/O
# ==============
# Constraint inputs
self.spineSrtInputConstraint = PoseConstraint('_'.join([
self.cogCtrlSpace.getName(), 'To',
self.spineMainSrtInputTgt.getName()
]))
self.spineSrtInputConstraint.addConstrainer(self.spineMainSrtInputTgt)
self.spineSrtInputConstraint.setMaintainOffset(True)
self.cogCtrlSpace.addConstraint(self.spineSrtInputConstraint)
# Constraint outputs
self.spineCogOutputConstraint = PoseConstraint('_'.join(
[self.spineCogOutputTgt.getName(), 'To',
self.cogCtrl.getName()]))
self.spineCogOutputConstraint.addConstrainer(self.cogCtrl)
self.spineCogOutputTgt.addConstraint(self.spineCogOutputConstraint)
# Spine Base
self.spineBaseOutputPosConstraint = PositionConstraint('_'.join([
self.spineBaseOutputTgt.getName(), 'PosTo',
self.spineOutputs[0].getName()
]))
self.spineBaseOutputPosConstraint.addConstrainer(self.spineOutputs[0])
self.spineBaseOutputTgt.addConstraint(
self.spineBaseOutputPosConstraint)
self.spineBaseOutputOriConstraint = OrientationConstraint('_'.join([
self.spineBaseOutputTgt.getName(), 'PosTo',
self.cogCtrl.getName()
]))
self.spineBaseOutputOriConstraint.addConstrainer(self.cogCtrl)
self.spineBaseOutputTgt.addConstraint(
self.spineBaseOutputOriConstraint)
# Spine End
self.spineEndOutputConstraint = PoseConstraint('_'.join(
[self.spineEndOutputTgt.getName(), 'To', 'spineEnd']))
self.spineEndOutputConstraint.addConstrainer(self.spineOutputs[0])
self.spineEndOutputTgt.addConstraint(self.spineEndOutputConstraint)
self.spineEndCtrlOutputConstraint = PoseConstraint('_'.join([
self.spineEndCtrlOutputTgt.getName(), 'To',
self.spineEndCtrl.getName()
]))
self.spineEndCtrlOutputConstraint.addConstrainer(self.spineEndCtrl)
self.spineEndCtrlOutputTgt.addConstraint(
self.spineEndCtrlOutputConstraint)
# ===============
# Add Splice Ops
# ===============
# Add Spine Splice Op
self.bezierSpineSpliceOp = SpliceOperator('spineSpliceOp',
'BezierSpineSolver',
'Kraken')
self.addOperator(self.bezierSpineSpliceOp)
# Add Att Inputs
self.bezierSpineSpliceOp.setInput('drawDebug', self.drawDebugInputAttr)
self.bezierSpineSpliceOp.setInput('rigScale', self.rigScaleInputAttr)
self.bezierSpineSpliceOp.setInput('length', self.lengthInputAttr)
# Add Xfo Inputs
self.bezierSpineSpliceOp.setInput('base', self.spineBaseCtrl)
self.bezierSpineSpliceOp.setInput('baseHandle',
self.spineBaseHandleCtrl)
self.bezierSpineSpliceOp.setInput('tipHandle', self.spineEndHandleCtrl)
self.bezierSpineSpliceOp.setInput('tip', self.spineEndCtrl)
# Add Xfo Outputs
self.bezierSpineSpliceOp.setOutput('outputs', self.spineOutputs)
# Add Deformer Splice Op
self.deformersToOutputsSpliceOp = SpliceOperator(
'spineDeformerSpliceOp',
'MultiPoseConstraintSolver',
'Kraken',
alwaysEval=True)
self.addOperator(self.deformersToOutputsSpliceOp)
# Add Att Inputs
self.deformersToOutputsSpliceOp.setInput('drawDebug',
self.drawDebugInputAttr)
self.deformersToOutputsSpliceOp.setInput('rigScale',
self.rigScaleInputAttr)
# Add Xfo Outputs
self.deformersToOutputsSpliceOp.setInput('constrainers',
self.spineOutputs)
# Add Xfo Outputs
self.deformersToOutputsSpliceOp.setOutput('constrainees',
self.deformerJoints)
Profiler.getInstance().pop()
def setNumDeformers(self, numDeformers):
# Add new deformers and outputs
for i in xrange(len(self.spineOutputs), numDeformers):
name = 'spine' + str(i + 1).zfill(2)
spineOutput = ComponentOutput(name, parent=self.outputHrcGrp)
self.spineOutputs.append(spineOutput)
for i in xrange(len(self.deformerJoints), numDeformers):
name = 'spine' + str(i + 1).zfill(2)
spineDef = Joint(name, parent=self.defCmpGrp)
spineDef.setComponent(self)
self.deformerJoints.append(spineDef)
return True
def loadData(self, data=None):
"""Load a saved guide representation from persisted data.
Arguments:
data -- object, The JSON data object.
Return:
True if successful.
"""
super(FabriceSpineRig, self).loadData(data)
# Get Data
cogPos = data['cogPos']
cogCtrlCrvData = data['cogCtrlCrvData']
spineBasePos = data['spineBasePos']
spineBaseCtrlCrvData = data['spineBaseCtrlCrvData']
spineBaseHandlePos = data['spineBaseHandlePos']
spineBaseHandleCtrlCrvData = data['spineBaseHandleCtrlCrvData']
spineEndHandlePos = data['spineEndHandlePos']
spineEndHandleCtrlCrvData = data['spineEndHandleCtrlCrvData']
spineEndPos = data['spineEndPos']
spineEndCtrlCrvData = data['spineEndCtrlCrvData']
numDeformers = data['numDeformers']
# Set Xfos
self.cogCtrlSpace.xfo.tr = cogPos
self.cogCtrl.xfo.tr = cogPos
self.cogCtrl.setCurveData(cogCtrlCrvData)
self.spineBaseCtrlSpace.xfo.tr = spineBasePos
self.spineBaseCtrl.xfo.tr = spineBasePos
self.spineBaseCtrl.setCurveData(spineBaseCtrlCrvData)
self.spineBaseHandleCtrlSpace.xfo.tr = spineBaseHandlePos
self.spineBaseHandleCtrl.xfo.tr = spineBaseHandlePos
self.spineBaseHandleCtrl.setCurveData(spineBaseHandleCtrlCrvData)
self.spineEndHandleCtrlSpace.xfo.tr = spineEndHandlePos
self.spineEndHandleCtrl.xfo.tr = spineEndHandlePos
self.spineEndHandleCtrl.setCurveData(spineEndHandleCtrlCrvData)
self.spineEndCtrlSpace.xfo.tr = spineEndPos
self.spineEndCtrl.xfo.tr = spineEndPos
self.spineEndCtrl.setCurveData(spineEndCtrlCrvData)
length = spineBasePos.distanceTo(
spineBaseHandlePos) + spineBaseHandlePos.distanceTo(
spineEndHandlePos) + spineEndHandlePos.distanceTo(spineEndPos)
self.lengthInputAttr.setMax(length * 3.0)
self.lengthInputAttr.setValue(length)
# Update number of deformers and outputs
self.setNumDeformers(numDeformers)
# Updating constraint to use the updated last output.
self.spineEndOutputConstraint.setConstrainer(self.spineOutputs[-1],
index=0)
# ============
# Set IO Xfos
# ============
# ====================
# Evaluate Splice Ops
# ====================
# evaluate the spine op so that all the output transforms are updated.
self.bezierSpineSpliceOp.evaluate()
# evaluate the constraint op so that all the joint transforms are updated.
self.deformersToOutputsSpliceOp.evaluate()
# evaluate the constraints to ensure the outputs are now in the correct location.
self.spineSrtInputConstraint.evaluate()
self.spineCogOutputConstraint.evaluate()
self.spineBaseOutputPosConstraint.evaluate()
self.spineBaseOutputOriConstraint.evaluate()
self.spineEndOutputConstraint.evaluate()
self.spineEndCtrlOutputConstraint.evaluate()
class FabriceSpineRig(FabriceSpine):
"""Fabrice Spine Component"""
def __init__(self, name="spine", parent=None):
Profiler.getInstance().push("Construct Spine Rig Component:" + name)
super(FabriceSpineRig, self).__init__(name, parent)
# =========
# Controls
# =========
# COG
self.cogCtrlSpace = CtrlSpace('cog', parent=self.ctrlCmpGrp)
self.cogCtrl = Control('cog', parent=self.cogCtrlSpace, shape="circle")
self.cogCtrl.rotatePoints(90, 0, 0)
self.cogCtrl.scalePoints(Vec3(3.0, 3.0, 3.0))
self.cogCtrl.translatePoints(Vec3(0.0, 0.0, 0.2))
self.cogCtrl.lockScale(x=True, y=True, z=True)
self.cogCtrl.setColor("orange")
# Spine Base
self.spineBaseCtrlSpace = CtrlSpace('spineBase', parent=self.cogCtrl)
self.spineBaseCtrl = Control('spineBase', parent=self.spineBaseCtrlSpace, shape="pin")
self.spineBaseCtrl.rotatePoints(90, 0, 0)
self.spineBaseCtrl.translatePoints(Vec3(0, 1.0, 0))
self.spineBaseCtrl.lockScale(x=True, y=True, z=True)
# Spine Base Handle
self.spineBaseHandleCtrlSpace = CtrlSpace('spineBaseHandle', parent=self.spineBaseCtrl)
self.spineBaseHandleCtrl = Control('spineBaseHandle', parent=self.spineBaseHandleCtrlSpace, shape="pin")
self.spineBaseHandleCtrl.rotatePoints(90, 0, 0)
self.spineBaseHandleCtrl.translatePoints(Vec3(0, 1.0, 0))
self.spineBaseHandleCtrl.lockScale(x=True, y=True, z=True)
self.spineBaseHandleCtrl.setColor("orange")
# Spine End
self.spineEndCtrlSpace = CtrlSpace('spineEnd', parent=self.cogCtrl)
self.spineEndCtrl = Control('spineEnd', parent=self.spineEndCtrlSpace, shape="pin")
self.spineEndCtrl.rotatePoints(90, 0, 0)
self.spineEndCtrl.lockScale(x=True, y=True, z=True)
self.spineEndCtrl.translatePoints(Vec3(0, 1.0, 0))
# Spine End Handle
self.spineEndHandleCtrlSpace = CtrlSpace('spineEndHandle', parent=self.spineEndCtrl)
self.spineEndHandleCtrl = Control('spineEndHandle', parent=self.spineEndHandleCtrlSpace, shape="pin")
self.spineEndHandleCtrl.rotatePoints(90, 0, 0)
self.spineEndHandleCtrl.translatePoints(Vec3(0, 1.0, 0))
self.spineEndHandleCtrl.lockScale(x=True, y=True, z=True)
self.spineEndHandleCtrl.setColor("orange")
# ==========
# Deformers
# ==========
deformersLayer = self.getOrCreateLayer('deformers')
self.defCmpGrp = ComponentGroup(self.getName(), self, parent=deformersLayer)
self.chestDef = Joint('chest', parent=self.defCmpGrp)
self.chestDef.setComponent(self)
self.deformerJoints = []
self.spineOutputs = []
self.setNumDeformers(1)
# =====================
# Create Component I/O
# =====================
# Setup component Xfo I/O's
self.spineVertebraeOutput.setTarget(self.spineOutputs)
# =====================
# Constraint Deformers
# =====================
self.chestDefConstraint = PoseConstraint('_'.join([self.chestDef.getName(), 'To', self.spineBaseOutputTgt.getName()]))
self.chestDefConstraint.addConstrainer(self.spineBaseOutputTgt)
self.chestDef.addConstraint(self.chestDefConstraint)
# ==============
# Constrain I/O
# ==============
# Constraint inputs
self.spineSrtInputConstraint = PoseConstraint('_'.join([self.cogCtrlSpace.getName(), 'To', self.spineMainSrtInputTgt.getName()]))
self.spineSrtInputConstraint.addConstrainer(self.spineMainSrtInputTgt)
self.spineSrtInputConstraint.setMaintainOffset(True)
self.cogCtrlSpace.addConstraint(self.spineSrtInputConstraint)
# Constraint outputs
self.spineCogOutputConstraint = PoseConstraint('_'.join([self.spineCogOutputTgt.getName(), 'To', self.cogCtrl.getName()]))
self.spineCogOutputConstraint.addConstrainer(self.cogCtrl)
self.spineCogOutputTgt.addConstraint(self.spineCogOutputConstraint)
# Spine Base
self.spineBaseOutputPosConstraint = PositionConstraint('_'.join([self.spineBaseOutputTgt.getName(), 'PosTo', self.spineOutputs[0].getName()]))
self.spineBaseOutputPosConstraint.addConstrainer(self.spineOutputs[0])
self.spineBaseOutputTgt.addConstraint(self.spineBaseOutputPosConstraint)
self.spineBaseOutputOriConstraint = OrientationConstraint('_'.join([self.spineBaseOutputTgt.getName(), 'PosTo', self.cogCtrl.getName()]))
self.spineBaseOutputOriConstraint.addConstrainer(self.cogCtrl)
self.spineBaseOutputTgt.addConstraint(self.spineBaseOutputOriConstraint)
# Spine End
self.spineEndOutputConstraint = PoseConstraint('_'.join([self.spineEndOutputTgt.getName(), 'To', 'spineEnd']))
self.spineEndOutputConstraint.addConstrainer(self.spineOutputs[0])
self.spineEndOutputTgt.addConstraint(self.spineEndOutputConstraint)
self.spineEndCtrlOutputConstraint = PoseConstraint('_'.join([self.spineEndCtrlOutputTgt.getName(), 'To', self.spineEndCtrl.getName()]))
self.spineEndCtrlOutputConstraint.addConstrainer(self.spineEndCtrl)
self.spineEndCtrlOutputTgt.addConstraint(self.spineEndCtrlOutputConstraint)
# ===============
# Add Splice Ops
# ===============
# Add Spine Splice Op
self.bezierSpineSpliceOp = SpliceOperator('spineSpliceOp', 'BezierSpineSolver', 'Kraken')
self.addOperator(self.bezierSpineSpliceOp)
# Add Att Inputs
self.bezierSpineSpliceOp.setInput('drawDebug', self.drawDebugInputAttr)
self.bezierSpineSpliceOp.setInput('rigScale', self.rigScaleInputAttr)
self.bezierSpineSpliceOp.setInput('length', self.lengthInputAttr)
# Add Xfo Inputs
self.bezierSpineSpliceOp.setInput('base', self.spineBaseCtrl)
self.bezierSpineSpliceOp.setInput('baseHandle', self.spineBaseHandleCtrl)
self.bezierSpineSpliceOp.setInput('tipHandle', self.spineEndHandleCtrl)
self.bezierSpineSpliceOp.setInput('tip', self.spineEndCtrl)
# Add Xfo Outputs
self.bezierSpineSpliceOp.setOutput('outputs', self.spineOutputs)
# Add Deformer Splice Op
self.deformersToOutputsSpliceOp = SpliceOperator('spineDeformerSpliceOp', 'MultiPoseConstraintSolver', 'Kraken', alwaysEval=True)
self.addOperator(self.deformersToOutputsSpliceOp)
# Add Att Inputs
self.deformersToOutputsSpliceOp.setInput('drawDebug', self.drawDebugInputAttr)
self.deformersToOutputsSpliceOp.setInput('rigScale', self.rigScaleInputAttr)
# Add Xfo Outputs
self.deformersToOutputsSpliceOp.setInput('constrainers', self.spineOutputs)
# Add Xfo Outputs
self.deformersToOutputsSpliceOp.setOutput('constrainees', self.deformerJoints)
Profiler.getInstance().pop()
def setNumDeformers(self, numDeformers):
# Add new deformers and outputs
for i in xrange(len(self.spineOutputs), numDeformers):
name = 'spine' + str(i + 1).zfill(2)
spineOutput = ComponentOutput(name, parent=self.outputHrcGrp)
self.spineOutputs.append(spineOutput)
for i in xrange(len(self.deformerJoints), numDeformers):
name = 'spine' + str(i + 1).zfill(2)
spineDef = Joint(name, parent=self.defCmpGrp)
spineDef.setComponent(self)
self.deformerJoints.append(spineDef)
return True
def loadData(self, data=None):
"""Load a saved guide representation from persisted data.
Arguments:
data -- object, The JSON data object.
Return:
True if successful.
"""
super(FabriceSpineRig, self).loadData( data )
# Get Data
cogPos = data['cogPos']
cogCtrlCrvData = data['cogCtrlCrvData']
spineBasePos = data['spineBasePos']
spineBaseCtrlCrvData = data['spineBaseCtrlCrvData']
spineBaseHandlePos = data['spineBaseHandlePos']
spineBaseHandleCtrlCrvData = data['spineBaseHandleCtrlCrvData']
spineEndHandlePos = data['spineEndHandlePos']
spineEndHandleCtrlCrvData = data['spineEndHandleCtrlCrvData']
spineEndPos = data['spineEndPos']
spineEndCtrlCrvData = data['spineEndCtrlCrvData']
numDeformers = data['numDeformers']
# Set Xfos
self.cogCtrlSpace.xfo.tr = cogPos
self.cogCtrl.xfo.tr = cogPos
self.cogCtrl.setCurveData(cogCtrlCrvData)
self.spineBaseCtrlSpace.xfo.tr = spineBasePos
self.spineBaseCtrl.xfo.tr = spineBasePos
self.spineBaseCtrl.setCurveData(spineBaseCtrlCrvData)
self.spineBaseHandleCtrlSpace.xfo.tr = spineBaseHandlePos
self.spineBaseHandleCtrl.xfo.tr = spineBaseHandlePos
self.spineBaseHandleCtrl.setCurveData(spineBaseHandleCtrlCrvData)
self.spineEndHandleCtrlSpace.xfo.tr = spineEndHandlePos
self.spineEndHandleCtrl.xfo.tr = spineEndHandlePos
self.spineEndHandleCtrl.setCurveData(spineEndHandleCtrlCrvData)
self.spineEndCtrlSpace.xfo.tr = spineEndPos
self.spineEndCtrl.xfo.tr = spineEndPos
self.spineEndCtrl.setCurveData(spineEndCtrlCrvData)
length = spineBasePos.distanceTo(spineBaseHandlePos) + spineBaseHandlePos.distanceTo(spineEndHandlePos) + spineEndHandlePos.distanceTo(spineEndPos)
self.lengthInputAttr.setMax(length * 3.0)
self.lengthInputAttr.setValue(length)
# Update number of deformers and outputs
self.setNumDeformers(numDeformers)
# Updating constraint to use the updated last output.
self.spineEndOutputConstraint.setConstrainer(self.spineOutputs[-1], index=0)
# ============
# Set IO Xfos
# ============
# ====================
# Evaluate Splice Ops
# ====================
# evaluate the spine op so that all the output transforms are updated.
self.bezierSpineSpliceOp.evaluate()
# evaluate the constraint op so that all the joint transforms are updated.
self.deformersToOutputsSpliceOp.evaluate()
# evaluate the constraints to ensure the outputs are now in the correct location.
self.spineSrtInputConstraint.evaluate()
self.spineCogOutputConstraint.evaluate()
self.spineBaseOutputPosConstraint.evaluate()
self.spineBaseOutputOriConstraint.evaluate()
self.spineEndOutputConstraint.evaluate()
self.spineEndCtrlOutputConstraint.evaluate()
class FKChainComponentRig(FKChainComponent):
"""FK Chain Rig"""
def __init__(self, name='FKChain', parent=None):
Profiler.getInstance().push("Construct FK Chain Rig Component:" + name)
super(FKChainComponentRig, self).__init__(name, parent)
# =========
# Controls
# =========
# FK
self.fkCtrlSpaces = []
self.fkCtrls = []
self.setNumControls(4)
# Add Component Params to FK control
chainSettingsAttrGrp = AttributeGroup("DisplayInfo_ChainSettings",
parent=self.fkCtrls[0])
chainDrawDebugInputAttr = BoolAttribute('drawDebug',
value=False,
parent=chainSettingsAttrGrp)
# Connect IO to controls
self.drawDebugInputAttr.connect(chainDrawDebugInputAttr)
# ==========
# Deformers
# ==========
deformersLayer = self.getOrCreateLayer('deformers')
self.defCmpGrp = ComponentGroup(self.getName(),
self,
parent=deformersLayer)
self.addItem('defCmpGrp', self.defCmpGrp)
self.deformerJoints = []
self.boneOutputsTgt = []
self.setNumDeformers(4)
# =====================
# Create Component I/O
# =====================
# Set IO Targets
self.boneOutputs.setTarget(self.boneOutputsTgt)
# ==============
# Constrain I/O
# ==============
# Constraint inputs
self.rootInputConstraint = PoseConstraint('_'.join([
self.fkCtrlSpaces[0].getName(), 'To',
self.rootInputTgt.getName()
]))
self.rootInputConstraint.setMaintainOffset(True)
self.rootInputConstraint.addConstrainer(self.rootInputTgt)
self.fkCtrlSpaces[0].addConstraint(self.rootInputConstraint)
# ===============
# Add Canvas Ops
# ===============
# Add Output Canvas Op
self.outputsToControlsKLOp = KLOperator('outputConstraint',
'MultiPoseConstraintSolver',
'Kraken')
self.addOperator(self.outputsToControlsKLOp)
# Add Att Inputs
self.outputsToControlsKLOp.setInput('drawDebug',
self.drawDebugInputAttr)
self.outputsToControlsKLOp.setInput('rigScale', self.rigScaleInputAttr)
# Add Xfo Inputs
self.outputsToControlsKLOp.setInput('constrainers', self.fkCtrls)
# Add Xfo Outputs
self.outputsToControlsKLOp.setOutput('constrainees',
self.boneOutputsTgt)
# Add Deformer Canvas Op
self.deformersToOutputsKLOp = KLOperator('defConstraint',
'MultiPoseConstraintSolver',
'Kraken')
self.addOperator(self.deformersToOutputsKLOp)
# Add Att Inputs
self.deformersToOutputsKLOp.setInput('drawDebug',
self.drawDebugInputAttr)
self.deformersToOutputsKLOp.setInput('rigScale',
self.rigScaleInputAttr)
# Add Xfo Inputs
self.deformersToOutputsKLOp.setInput('constrainers',
self.boneOutputsTgt)
# Add Xfo Outputs
self.deformersToOutputsKLOp.setOutput('constrainees',
self.deformerJoints)
Profiler.getInstance().pop()
def setNumControls(self, numControls):
# Add more controls
if numControls > len(self.fkCtrlSpaces):
for i in xrange(len(self.fkCtrlSpaces), numControls):
if i == 0:
parent = self.ctrlCmpGrp
else:
parent = self.fkCtrls[i - 1]
boneName = 'bone' + str(i + 1).zfill(2) + 'FK'
boneFKCtrlSpace = CtrlSpace(boneName, parent=parent)
boneFKCtrl = Control(boneName,
parent=boneFKCtrlSpace,
shape="cube")
boneFKCtrl.alignOnXAxis()
boneFKCtrl.lockScale(x=True, y=True, z=True)
boneFKCtrl.lockTranslation(x=True, y=True, z=True)
self.fkCtrlSpaces.append(boneFKCtrlSpace)
self.fkCtrls.append(boneFKCtrl)
# Remove extra ctrls
elif numControls < len(self.fkCtrlSpaces):
numExtraCtrls = len(self.fkCtrls) - numControls
for i in xrange(numExtraCtrls):
extraCtrlSpace = self.fkCtrlSpaces.pop()
extraCtrl = self.fkCtrls.pop()
extraCtrlSpace.getParent().removeChild(extraCtrlSpace)
extraCtrl.getParent().removeChild(extraCtrl)
def setNumDeformers(self, numDeformers):
# Add more deformers and outputs
if numDeformers > len(self.boneOutputsTgt):
for i in xrange(len(self.boneOutputsTgt), numDeformers):
name = 'bone' + str(i + 1).zfill(2)
defOutput = ComponentOutput(name, parent=self.outputHrcGrp)
self.boneOutputsTgt.append(defOutput)
boneDef = Joint(name, parent=self.defCmpGrp)
boneDef.setComponent(self)
self.deformerJoints.append(boneDef)
# Remove extra deformers and outputs
elif numDeformers < len(self.boneOutputsTgt):
numExtraOutputs = len(self.boneOutputsTgt) - numDeformers
numExtraDefs = len(self.deformerJoints) - numDeformers
for i in xrange(numExtraOutputs):
extraOutput = self.boneOutputsTgt.pop()
extraDef = self.deformerJoints.pop()
extraOutput.getParent().removeChild(extraOutput)
extraDef.getParent().removeChild(extraDef)
return True
def loadData(self, data=None):
"""Load a saved guide representation from persisted data.
Arguments:
data -- object, The JSON data object.
Return:
True if successful.
"""
super(FKChainComponentRig, self).loadData(data)
boneXfos = data['boneXfos']
boneLengths = data['boneLengths']
numJoints = data['numJoints']
# Add extra controls and outputs
self.setNumControls(numJoints)
self.setNumDeformers(numJoints)
for i in xrange(numJoints):
self.fkCtrlSpaces[i].xfo = boneXfos[i]
self.fkCtrls[i].xfo = boneXfos[i]
self.fkCtrls[i].scalePoints(
Vec3(boneLengths[i], boneLengths[i] * 0.45,
boneLengths[i] * 0.45))
# ==========================
# Create Output Constraints
# ==========================
# This needs to be done here since the 'numJoints' attribute resizes the
# number of controls and outputs
self.chainEndXfoOutputConstraint = PoseConstraint('_'.join([
self.chainEndXfoOutputTgt.getName(), 'To',
self.boneOutputsTgt[-1].getName()
]))
self.chainEndXfoOutputConstraint.setMaintainOffset(True)
self.chainEndXfoOutputConstraint.addConstrainer(
self.boneOutputsTgt[-1])
self.chainEndXfoOutputTgt.addConstraint(
self.chainEndXfoOutputConstraint)
self.chainEndPosOutputConstraint = PositionConstraint('_'.join([
self.chainEndPosOutputTgt.getName(), 'To',
self.boneOutputsTgt[-1].getName()
]))
self.chainEndPosOutputConstraint.setMaintainOffset(True)
self.chainEndPosOutputConstraint.addConstrainer(
self.boneOutputsTgt[-1])
self.chainEndPosOutputTgt.addConstraint(
self.chainEndPosOutputConstraint)
# ============
# Set IO Xfos
# ============
self.rootInputTgt.xfo = boneXfos[0]
for i in xrange(numJoints):
self.boneOutputsTgt[i].xfo = boneXfos[i]
self.chainEndXfoOutputTgt.xfo = data['endXfo']
self.chainEndPosOutputTgt.xfo = data['endXfo']
# =============
# Set IO Attrs
# =============
# ====================
# Evaluate Canvas Ops
# ====================
# Eval Outputs to Controls Op to evaulate with new outputs and controls
self.outputsToControlsKLOp.evaluate()
# evaluate the output splice op to evaluate with new outputs and deformers
self.deformersToOutputsKLOp.evaluate()
# evaluate the constraints to ensure the outputs are now in the correct location.
self.rootInputConstraint.evaluate()
self.chainEndXfoOutputConstraint.evaluate()
self.chainEndPosOutputConstraint.evaluate()