Пример #1
0
    def derivedExecute(self,obj):
        # cache stuff
        if latticeBaseFeature.isObjectLattice(obj.Base):
            latticeExecuter.warning(obj,"Base is a lattice object. Since a non-lattice object is required by arrayFromShape tool, the results may be unexpected.")

        base = obj.Base.Shape
        if obj.WholeObject:
            baseChildren = [base]
            #if obj.FlattenBaseHierarchy:
            #    latticeExecuter.warning(obj, "FlattenBaseHierarchy is ignored because WholeObject is set to True")
        else:
            if base.ShapeType != 'Compound':
                base = Part.makeCompound([base])
            if obj.FlattenBaseHierarchy:
                baseChildren = LCE.AllLeaves(base)
            else:
                baseChildren = base.childShapes()
        
                        
        #cache mode comparisons, for speed
        posIsNone = obj.TranslateMode == '(none)'
        posIsBase = obj.TranslateMode == 'base'
        posIsChild = obj.TranslateMode == 'child'
        posIsCenterM = obj.TranslateMode == 'child.CenterOfMass'
        posIsCenterBB = obj.TranslateMode == 'child.CenterOfBoundBox'
        posIsVertex = obj.TranslateMode == 'child.Vertex'
        
        oriIsNone = obj.OrientMode == '(none)'
        oriIsBase = obj.OrientMode == 'base'
        oriIsChild = obj.OrientMode == 'child'
        oriIsInertial = obj.OrientMode == 'child.InertiaAxes'
        oriIsEdge = obj.OrientMode == 'child.Edge'
        oriIsFace = obj.OrientMode == 'child.FaceAxis'
        
        # initialize output containers and loop variables
        outputPlms = [] #list of placements
        
        # the essence
        for child in baseChildren:
            pos = App.Vector()
            ori = App.Rotation()
            if posIsNone:
                pass
            elif posIsBase:
                pos = base.Placement.Base
            elif posIsChild:
                pos = child.Placement.Base
            elif posIsCenterM:
                leaves = LCE.AllLeaves(child)
                totalW = 0
                weightAttrib = {"Vertex":"",
                             "Edge":"Length",
                             "Wire":"Length",
                             "Face":"Area",
                             "Shell":"Area",
                             "Solid":"Volume",
                             "CompSolid":""}[leaves[0].ShapeType]
                #Center of mass of a compound is a weghted average of centers
                # of mass of individual objects.
                for leaf in leaves:
                    w = 1.0 if not weightAttrib else (getattr(leaf, weightAttrib))
                    if leaf.ShapeType == 'Vertex':
                        leafCM = leaf.Point
                    #elif child.ShapeType == 'CompSolid':
                        #todo
                    else: 
                        leafCM = leaf.CenterOfMass
                    pos += leafCM * w
                    totalW += w
                pos = pos * (1.0/totalW)
            elif posIsCenterBB:
                import latticeBoundBox
                bb = latticeBoundBox.getPrecisionBoundBox(child)
                pos = bb.Center
            elif posIsVertex:
                v = child.Vertexes[obj.TranslateElementIndex - 1]
                pos = v.Point
            else:
                raise ValueError("latticePolarArrayFromShape: translation mode not implemented: "+obj.TranslateMode)
            
            if oriIsNone:
                pass
            elif oriIsBase:
                ori = base.Placement.Rotation
            elif oriIsChild:
                ori = child.Placement.Rotation
            elif oriIsInertial:
                leaves = LCE.AllLeaves(child)
                if len(leaves)>1:
                    raise ValueError("latticePolarArrayFromShape: calculation of principal axes of compounds is not supported yet")
                props = leaves[0].PrincipalProperties
                XAx = props['FirstAxisOfInertia']
                ZAx = props['ThirdAxisOfInertia']
                ori = Utils.makeOrientationFromLocalAxes(ZAx, XAx)
            elif oriIsEdge:
                edge = child.Edges[obj.OrientElementIndex - 1]
                XAx = edge.Curve.tangent(edge.Curve.FirstParameter)[0]
                ori1 = Utils.makeOrientationFromLocalAxes(ZAx= XAx)
                ori2 = Utils.makeOrientationFromLocalAxes(ZAx= App.Vector(1,0,0),XAx= App.Vector(0,0,1))
                ori = ori1.multiply(ori2)
            elif oriIsFace:
                face = child.Faces[obj.OrientElementIndex - 1]
                ZAx = face.Surface.Axis
            else:
                raise ValueError("latticePolarArrayFromShape: rientation mode not implemented: "+obj.OrientMode)

            plm = App.Placement(pos, ori)
            outputPlms.append(plm)
        return outputPlms
Пример #2
0
    def execute(self,obj):
        nOfStrings = len(obj.Strings)
        lattice = obj.ArrayLink
        if lattice is None:
            plms = [App.Placement() for i in range(0,nOfStrings)]
        else:
            if not latticeBaseFeature.isObjectLattice(lattice):
                latticeExecuter.warning(obj,"ShapeString's link to array must point to a lattice. It points to a generic shape. Results may be unexpected.")
            leaves = LCE.AllLeaves(lattice.Shape)
            plms = [leaf.Placement for leaf in leaves]
        
        #update foolObj's properties
        for (proptype, propname, group, hint) in self.foolObj.properties:
            if propname != "String": #ignore "String", that will be taken care of in the following loop
                setattr(self.foolObj, propname, getattr(obj, propname))
        self.foolObj.FontFile = findFont(obj.FontFile)
        obj.FullPathToFont = self.foolObj.FontFile
        
        shapes = []
        for i in range(  0 ,  min(len(plms),len(obj.Strings))  ):
            if len(obj.Strings[i]) > 0:
                #generate shapestring using Draft
                self.foolObj.String = obj.Strings[i]
                self.foolObj.Shape = None
                self.draft_shape_string.execute(self.foolObj)
                shape = self.foolObj.Shape
                
                #calculate alignment point
                if obj.XAlign == 'None' and obj.YAlign == 'None':
                    pass #need not calculate boundbox
                else:
                    if obj.AlignPrecisionBoundBox:
                        bb = getPrecisionBoundBox(shape)
                    else:
                        bb = shape.BoundBox

                alignPnt = App.Vector()
                
                if obj.XAlign == 'Left':
                    alignPnt.x = bb.XMin
                elif obj.XAlign == 'Right':
                    alignPnt.x = bb.XMax
                elif obj.XAlign == 'Middle':
                    alignPnt.x = bb.Center.x

                if obj.YAlign == 'Bottom':
                    alignPnt.y = bb.YMin
                elif obj.YAlign == 'Top':
                    alignPnt.y = bb.YMax
                elif obj.YAlign == 'Middle':
                    alignPnt.y = bb.Center.y
                
                #Apply alignment
                shape.Placement = App.Placement(alignPnt*(-1.0), App.Rotation()).multiply(shape.Placement)
                
                #Apply placement from array
                shape.Placement = plms[i].multiply(shape.Placement)
                
                shapes.append(shape.copy())
        
        if len(shapes) == 0:
            scale = 1.0
            if lattice is not None:
                scale = lattice.Shape.BoundBox.DiagonalLength/math.sqrt(3)/math.sqrt(len(shps))
            if scale < DistConfusion * 100:
                scale = 1.0
            obj.Shape = markers.getNullShapeShape(scale)
            raise ValueError('No strings were converted into shapes') #Feeding empty compounds to FreeCAD seems to cause rendering issues, otherwise it would have been a good idea to output nothing.

        obj.Shape = Part.makeCompound(shapes)
Пример #3
0
    def execute(self,obj):
        nOfStrings = len(obj.Strings)
        lattice = obj.ArrayLink
        if lattice is None:
            plms = [App.Placement() for i in range(0,nOfStrings)]
        else:
            if not latticeBaseFeature.isObjectLattice(lattice):
                latticeExecuter.warning(obj,"ShapeString's link to array must point to a lattice. It points to a generic shape. Results may be unexpected.")
            leaves = LCE.AllLeaves(lattice.Shape)
            plms = [leaf.Placement for leaf in leaves]
        
        #update foolObj's properties
        self.makeFoolObj(obj) #make sure we have one - fixes defunct Lattice ShapeString after save-load
        for (proptype, propname, group, hint) in self.foolObj.properties:
            if propname != "String": #ignore "String", that will be taken care of in the following loop
                setattr(self.foolObj, propname, getattr(obj, propname))
        self.foolObj.FontFile = findFont(obj.FontFile)
        obj.FullPathToFont = self.foolObj.FontFile
        
        shapes = []
        for i in range(  0 ,  min(len(plms),len(obj.Strings))  ):
            if len(obj.Strings[i]) > 0:
                #generate shapestring using Draft
                self.foolObj.String = obj.Strings[i]
                self.foolObj.Shape = None
                self.draft_shape_string.execute(self.foolObj)
                shape = self.foolObj.Shape
                
                #calculate alignment point
                if obj.XAlign == 'None' and obj.YAlign == 'None':
                    pass #need not calculate boundbox
                else:
                    if obj.AlignPrecisionBoundBox:
                        bb = getPrecisionBoundBox(shape)
                    else:
                        bb = shape.BoundBox

                alignPnt = App.Vector()
                
                if obj.XAlign == 'Left':
                    alignPnt.x = bb.XMin
                elif obj.XAlign == 'Right':
                    alignPnt.x = bb.XMax
                elif obj.XAlign == 'Middle':
                    alignPnt.x = bb.Center.x

                if obj.YAlign == 'Bottom':
                    alignPnt.y = bb.YMin
                elif obj.YAlign == 'Top':
                    alignPnt.y = bb.YMax
                elif obj.YAlign == 'Middle':
                    alignPnt.y = bb.Center.y
                
                #Apply alignment
                shape.Placement = App.Placement(alignPnt*(-1.0), App.Rotation()).multiply(shape.Placement)
                
                #Apply placement from array
                shape.Placement = plms[i].multiply(shape.Placement)
                
                shapes.append(shape.copy())
        
        if len(shapes) == 0:
            scale = 1.0
            if lattice is not None:
                scale = lattice.Shape.BoundBox.DiagonalLength/math.sqrt(3)/math.sqrt(len(shps))
            if scale < DistConfusion * 100:
                scale = 1.0
            obj.Shape = markers.getNullShapeShape(scale)
            raise ValueError('No strings were converted into shapes') #Feeding empty compounds to FreeCAD seems to cause rendering issues, otherwise it would have been a good idea to output nothing.

        obj.Shape = Part.makeCompound(shapes)