Пример #1
0
def loop():

    global xb, telem, coord

    DEFAULT_COM_PORT = 'COM7'
    DEFAULT_BAUD_RATE = 57600
    DEFAULT_ADDRESS = '\x10\x21'
    DEFAULT_PAN = 0x1001
    
    if len(sys.argv) == 1:
        com = DEFAULT_COM_PORT
        baud = DEFAULT_BAUD_RATE
        addr = DEFAULT_ADDRESS
    elif len(sys.argv) == 4:
        com = sys.argv[1]
        baud = int(sys.argv[2])
        addr = pack('>H', int(sys.argv[3], 16))
    else:
        print "Wrong number of arguments. Must be: COM BAUD ADDR"
        sys.exit(1)
    
    ser = Serial(port = com, baudrate = baud) 
    xb = XBee(ser, callback = rxCallback)
    print "Setting PAN ID to " + hex(DEFAULT_PAN)
    xb.at(command = 'ID', parameter = pack('>H', DEFAULT_PAN))                 
    
    comm = CommandInterface(addr, txCallback)
    telem = TelemetryReader(addr, txCallback)
    kbint = KeyboardInterface(comm)
    coord = NetworkCoordinator(txCallback)
    
    comm.enableDebug()
    telem.setConsoleMode(True)
    telem.setFileMode(True)
    telem.writeHeader()
    coord.resume()
    
    comm.setSlewLimit(3.0)
    
    while True:

        try:
            c = None
            if( msvcrt.kbhit() ):
               c = msvcrt.getch()
            kbint.process(c)
            time.sleep(0.01)
            #comm.sendPing()

        except:        
            break
            
    telem.close()                
    xb.halt()
    ser.close()
Пример #2
0
def loop():

    global xb, telem, coord

    DEFAULT_COM_PORT = 'COM7'
    DEFAULT_BAUD_RATE = 57600
    DEFAULT_ADDRESS = '\x10\x21'
    DEFAULT_PAN = 0x1001

    if len(sys.argv) == 1:
        com = DEFAULT_COM_PORT
        baud = DEFAULT_BAUD_RATE
        addr = DEFAULT_ADDRESS
    elif len(sys.argv) == 4:
        com = sys.argv[1]
        baud = int(sys.argv[2])
        addr = pack('>H', int(sys.argv[3], 16))
    else:
        print "Wrong number of arguments. Must be: COM BAUD ADDR"
        sys.exit(1)

    ser = Serial(port=com, baudrate=baud)
    xb = XBee(ser, callback=rxCallback)
    print "Setting PAN ID to " + hex(DEFAULT_PAN)
    xb.at(command='ID', parameter=pack('>H', DEFAULT_PAN))

    comm = CommandInterface(addr, txCallback)
    telem = TelemetryReader(addr, txCallback)
    kbint = KeyboardInterface(comm)
    coord = NetworkCoordinator(txCallback)

    comm.enableDebug()
    telem.setConsoleMode(True)
    telem.setFileMode(True)
    telem.writeHeader()
    coord.resume()

    comm.setSlewLimit(3.0)

    while True:

        try:
            c = None
            if (msvcrt.kbhit()):
                c = msvcrt.getch()
            kbint.process(c)
            time.sleep(0.01)
            #comm.sendPing()

        except:
            break

    telem.close()
    xb.halt()
    ser.close()
Пример #3
0
def loop():

    global xb, telem, coord

    DEFAULT_COM_PORT = 'COM7'
    DEFAULT_BAUD_RATE = 57600
    DEFAULT_ADDRESS = '\x10\x21'
    DEFAULT_PAN = 0x1001
    
    if len(sys.argv) == 1:
        com = DEFAULT_COM_PORT
        baud = DEFAULT_BAUD_RATE
        addr = DEFAULT_ADDRESS
    elif len(sys.argv) == 4:
        com = sys.argv[1]
        baud = int(sys.argv[2])
        addr = pack('>H', int(sys.argv[3], 16))
    else:
        print "Wrong number of arguments. Must be: COM BAUD ADDR"
        sys.exit(1)
    
    ser = Serial(port = com, baudrate = baud) 
    xb = XBee(ser, callback = rxCallback)
    print "Setting PAN ID to " + hex(DEFAULT_PAN)
    xb.at(command = 'ID', parameter = pack('>H', DEFAULT_PAN))                 
    
    comm = CommandInterface(addr, txCallback)
    telem = TelemetryReader(addr, txCallback)
    kbint = KeyboardInterface(comm)
    coord = NetworkCoordinator(txCallback)
    
    comm.enableDebug()
    telem.setConsoleMode(True)
    telem.setFileMode(True)
    telem.writeHeader()
    coord.resume()
    
    comm.setSlewLimit(3.0)
    
    while True:

        try:   
            # Copied from code.activestate.com/recipes/134892/
            # TODO: Find a way to avoid this blocking call
            fd = sys.stdin.fileno()
            old_settings = termios.tcgetattr(fd)
            try:
                tty.setraw(sys.stdin.fileno())
                c = sys.stdin.read(1)
            finally:
                termios.tcsetattr(fd, termios.TCSADRAIN, old_settings)             
            kbint.process(c)
            time.sleep(0.01)
            #comm.sendPing()
    
        except:        
            break
            
    telem.close()                
    xb.halt()
    ser.close()
Пример #4
0
def loop():

    global xb, telem, coord

    DEFAULT_COM_PORT = 'COM7'
    DEFAULT_BAUD_RATE = 57600
    DEFAULT_ADDRESS = '\x10\x21'
    DEFAULT_PAN = 0x1001
    
    if len(sys.argv) == 1:
        com = DEFAULT_COM_PORT
        baud = DEFAULT_BAUD_RATE
        addr = DEFAULT_ADDRESS
    elif len(sys.argv) == 4:
        com = sys.argv[1]
        baud = int(sys.argv[2])
        addr = pack('>H', int(sys.argv[3], 16))
    else:
        print "Wrong number of arguments. Must be: COM BAUD ADDR"
        sys.exit(1)
    
    ser = Serial(port = com, baudrate = baud) 
    xb = XBee(ser, callback = rxCallback)
    print "Setting PAN ID to " + hex(DEFAULT_PAN)
    xb.at(command = 'ID', parameter = pack('>H', DEFAULT_PAN))                 
    
    comm = CommandInterface(addr, txCallback)
    telem = TelemetryReader(addr, txCallback)
    kbint = KeyboardInterface(comm)
    coord = NetworkCoordinator(txCallback)
    
    comm.enableDebug()
    telem.setConsoleMode(True)
    telem.setFileMode(True)
    telem.writeHeader()
    coord.resume()
    
    comm.setSlewLimit(3.0)
    
    while True:

        try:   
            # Copied from code.activestate.com/recipes/134892/
            # TODO: Find a way to avoid this blocking call
            fd = sys.stdin.fileno()
            old_settings = termios.tcgetattr(fd)
            try:
                tty.setraw(sys.stdin.fileno())
                c = sys.stdin.read(1)
            finally:
                termios.tcsetattr(fd, termios.TCSADRAIN, old_settings)             
            kbint.process(c)
            time.sleep(0.01)
            #comm.sendPing()
    
        except:        
            break
            
    telem.close()                
    xb.halt()
    ser.close()