Пример #1
0
def test_PIM_hello_tx_rx_p1(request):
    """
    TC_54 Verify received and transmit hello stats
        are getting cleared after PIM nbr reset
    """

    tgen = get_topogen()
    tc_name = request.node.name
    write_test_header(tc_name)

    # Creating configuration from JSON
    kill_iperf(tgen)
    clear_ip_mroute(tgen)
    reset_config_on_routers(tgen)
    clear_ip_pim_interface_traffic(tgen, topo)

    # Don"t run this test if we have any failure.
    if tgen.routers_have_failure():
        pytest.skip(tgen.errors)
    step(
        "Remove c1-c2 connected link to simulate topo "
        "c1(LHR)---l1(RP)----r2---f1-----c2(FHR)"
    )

    intf_c1_c2 = topo["routers"]["c1"]["links"]["c2"]["interface"]
    intf_c2_c1 = topo["routers"]["c2"]["links"]["c1"]["interface"]
    shutdown_bringup_interface(tgen, "c1", intf_c1_c2, False)
    shutdown_bringup_interface(tgen, "c2", intf_c2_c1, False)

    step("Enable the PIM on all the interfaces of FRR1, FRR2, FRR3")
    step(
        "Enable IGMP of FRR1 interface and send IGMP joins "
        " from FRR1 node for group range (225.1.1.1-5)"
    )

    intf_c1_i4 = topo["routers"]["c1"]["links"]["i4"]["interface"]
    input_dict = {
        "c1": {"igmp": {"interfaces": {intf_c1_i4: {"igmp": {"version": "2"}}}}}
    }
    result = create_igmp_config(tgen, topo, input_dict)
    assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

    input_join = {"i4": topo["routers"]["i4"]["links"]["c1"]["interface"]}

    for recvr, recvr_intf in input_join.items():
        result = config_to_send_igmp_join_and_traffic(
            tgen, topo, tc_name, recvr, recvr_intf, GROUP_RANGE_1, join=True
        )
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

        result = iperfSendIGMPJoin(tgen, recvr, IGMP_JOIN_RANGE_1, join_interval=1)
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

    step("Configure static RP for (225.1.1.1-5) as R2")

    input_dict = {
        "l1": {
            "pim": {
                "rp": [
                    {
                        "rp_addr": topo["routers"]["l1"]["links"]["lo"]["ipv4"].split(
                            "/"
                        )[0],
                        "group_addr_range": GROUP_RANGE,
                    }
                ]
            }
        }
    }

    result = create_pim_config(tgen, topo, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("Send Mcast traffic from C2 to all the groups ( 225.1.1.1 to 225.1.1.5)")

    input_src = {"i5": topo["routers"]["i5"]["links"]["c2"]["interface"]}

    for src, src_intf in input_src.items():
        result = config_to_send_igmp_join_and_traffic(
            tgen, topo, tc_name, src, src_intf, GROUP_RANGE_1, traffic=True
        )
        assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)

        result = iperfSendTraffic(tgen, src, IGMP_JOIN_RANGE_1, 32, 2500)
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    source_i5 = topo["routers"]["i5"]["links"]["c2"]["ipv4"].split("/")[0]

    input_dict_starg = [
        {
            "dut": "c1",
            "src_address": "*",
            "iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
            "oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
        }
    ]

    input_dict_sg = [
        {
            "dut": "c1",
            "src_address": source_i5,
            "iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
            "oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
        }
    ]

    step("(*,G) and (S,G) created on f1 and node verify using 'show ip mroute'")
    for data in input_dict_sg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    for data in input_dict_starg:
        result = verify_ip_mroutes(
            tgen,
            data["dut"],
            data["src_address"],
            IGMP_JOIN_RANGE_1,
            data["iif"],
            data["oil"],
        )
        assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    intf_l1_c1 = topo["routers"]["l1"]["links"]["c1"]["interface"]
    intf_c1_l1 = topo["routers"]["c1"]["links"]["l1"]["interface"]

    step("verify before stats on C1")
    state_dict = {"c1": {intf_c1_l1: ["helloTx", "helloRx"],}}

    c1_state_before = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("Flap PIM nbr while doing interface c1-l1 interface shut from f1 side")
    shutdown_bringup_interface(tgen, "c1", intf_c1_l1, False)

    step(
        "After shut of local interface from c1 , verify rx/tx hello counters are cleared on c1 side"
        "verify using 'show ip pim interface traffic'"
    )
    shutdown_bringup_interface(tgen, "c1", intf_c1_l1, True)

    step("verify stats after on c1")
    c1_state_after = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("verify stats not increamented on c1")
    result = verify_state_incremented(c1_state_before, c1_state_after)
    assert (
        result is not True
    ), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)

    step("verify before stats on l1")
    l1_state_dict = {"l1": {intf_l1_c1: ["helloTx", "helloRx"],}}

    l1_state_before = verify_pim_interface_traffic(tgen, l1_state_dict)
    assert isinstance(
        l1_state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("Flap PIM nbr while doing interface r2-c1 shut from r2 side")
    shutdown_bringup_interface(tgen, "l1", intf_l1_c1, False)

    step(
        "After shut the interface from r2 side , verify r2 side rx and tx of hello"
        "counters are resetted show ip pim interface traffic"
    )
    shutdown_bringup_interface(tgen, "l1", intf_l1_c1, True)

    step("verify stats after on l1")
    l1_state_after = verify_pim_interface_traffic(tgen, l1_state_dict)
    assert isinstance(
        l1_state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("verify stats not increamented on l1")
    result = verify_state_incremented(l1_state_before, l1_state_after)
    assert (
        result is not True
    ), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)

    step("Reinit the dict")
    c1_state_before = {}
    l1_state_before = {}
    c1_state_after = {}
    l1_state_after = {}

    step("verify before stats on C1")
    state_dict = {"c1": {intf_c1_l1: ["helloTx", "helloRx"],}}

    c1_state_before = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("Flap c1-r2 pim nbr while changing ip address from c1 side")
    c1_l1_ip_subnet = topo["routers"]["c1"]["links"]["l1"]["ipv4"]

    raw_config = {
        "c1": {
            "raw_config": [
                "interface {}".format(intf_c1_l1),
                "no ip address {}".format(c1_l1_ip_subnet),
                "ip address {}".format(NEW_ADDRESS_2_SUBNET),
            ]
        }
    }

    result = apply_raw_config(tgen, raw_config)
    assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)

    step("verify stats after on c1")
    c1_state_after = verify_pim_interface_traffic(tgen, state_dict)
    assert isinstance(
        c1_state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n "
    "Error: {}".format(tc_name, result)

    step("verify stats not increamented on c1")
    result = verify_state_incremented(c1_state_before, c1_state_after)
    assert (
        result is not True
    ), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)

    write_test_footer(tc_name)
def test_pimv6_add_delete_static_RP_p0(request):
    """
    TC_1: Verify upstream interfaces(IIF) and join state are updated
        properly after adding and deleting the static RP
    TC_2: Verify IIF and OIL in "show ip pim state" updated properly
        after adding and deleting the static RP
    TC_3: (*, G) Mroute entry are cleared when static RP gets deleted
    TC_4: Verify (*,G) prune is send towards the RP after deleting the
        static RP

    TOPOlogy used:
         r0------r1-----r2
       iperf    DUT     RP
    """

    tgen = get_topogen()
    tc_name = request.node.name
    write_test_header(tc_name)

    # Don"t run this test if we have any failure.
    if tgen.routers_have_failure():
        check_router_status(tgen)

    step("Shut link b/w R1 and R3 and R1 and R4 as per tescase topology")
    intf_r1_r3 = TOPO["routers"]["r1"]["links"]["r3"]["interface"]
    intf_r1_r4 = TOPO["routers"]["r1"]["links"]["r4"]["interface"]
    for intf in [intf_r1_r3, intf_r1_r4]:
        shutdown_bringup_interface(tgen, "r1", intf, ifaceaction=False)

    step("Enable PIM between r1 and r2")
    step("Enable MLD on r1 interface and send IGMP " "join (FF08::1) to r1")
    step("Configure r2 loopback interface as RP")
    input_dict = {
        "r2": {
            "pim6": {
                "rp": [{
                    "rp_addr":
                    TOPO["routers"]["r2"]["links"]["lo"]["ipv6"].split("/")[0],
                    "group_addr_range":
                    GROUP_RANGE_V6,
                }]
            }
        }
    }

    result = create_pim_config(tgen, TOPO, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("Verify show ip pim interface traffic without any mld join")
    state_dict = {
        "r1": {
            TOPO["routers"]["r1"]["links"]["r2"]["interface"]: ["pruneTx"]
        }
    }

    state_before = verify_pim_interface_traffic(tgen,
                                                state_dict,
                                                addr_type="ipv6")
    assert isinstance(
        state_before, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n " "Error: {}".format(
        tc_name, result)

    step("send mld join (FF08::1) to R1")
    intf = TOPO["routers"]["r0"]["links"]["r1"]["interface"]
    intf_ip = TOPO["routers"]["r0"]["links"]["r1"]["ipv6"].split("/")[0]
    result = socat_send_igmp_join_traffic(tgen,
                                          "r0",
                                          "UDP6-RECV",
                                          IGMP_JOIN_V6,
                                          intf,
                                          intf_ip,
                                          join=True)
    assert result is True, "Testcase {}: Failed Error: {}".format(
        tc_name, result)

    step("r1: Verify RP info")
    dut = "r1"
    oif = TOPO["routers"]["r1"]["links"]["r2"]["interface"]
    iif = TOPO["routers"]["r1"]["links"]["r0"]["interface"]
    rp_address = TOPO["routers"]["r2"]["links"]["lo"]["ipv6"].split("/")[0]
    result = verify_pim_rp_info(tgen, TOPO, dut, GROUP_RANGE_V6, oif,
                                rp_address, SOURCE)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify upstream IIF interface")
    result = verify_upstream_iif(tgen, dut, oif, STAR, IGMP_JOIN_V6)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify upstream join state and join timer")
    result = verify_join_state_and_timer(tgen, dut, oif, STAR, IGMP_JOIN_V6)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify PIM state")
    result = verify_pim_state(tgen, dut, oif, iif, IGMP_JOIN_V6)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Verify ip mroutes")
    result = verify_mroutes(tgen, dut, STAR, IGMP_JOIN_V6, oif, iif)
    assert result is True, "Testcase {} :Failed \n Error: {}".format(
        tc_name, result)

    step("r1: Delete RP configuration")
    input_dict = {
        "r2": {
            "pim6": {
                "rp": [{
                    "rp_addr":
                    TOPO["routers"]["r2"]["links"]["lo"]["ipv6"].split("/")[0],
                    "group_addr_range":
                    GROUP_RANGE_V6,
                    "delete":
                    True,
                }]
            }
        }
    }

    result = create_pim_config(tgen, TOPO, input_dict)
    assert result is True, "Testcase {} : Failed Error: {}".format(
        tc_name, result)

    step("r1: Verify RP info")
    result = verify_pim_rp_info(tgen,
                                TOPO,
                                dut,
                                GROUP_RANGE_V6,
                                oif,
                                rp_address,
                                SOURCE,
                                expected=False)
    assert (
        result is not True
    ), "Testcase {} :Failed \n " "RP: {} info is still present \n Error: {}".format(
        tc_name, rp_address, result)

    step("r1: Verify upstream IIF interface")
    result = verify_upstream_iif(tgen,
                                 dut,
                                 oif,
                                 STAR,
                                 IGMP_JOIN_V6,
                                 expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "Upstream ({}, {}) is still in join state \n Error: {}".format(
            tc_name, STAR, IGMP_JOIN_V6, result))

    step("r1: Verify upstream join state and join timer")
    result = verify_join_state_and_timer(tgen,
                                         dut,
                                         oif,
                                         STAR,
                                         IGMP_JOIN_V6,
                                         expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "Upstream ({}, {}) timer is still running \n Error: {}".format(
            tc_name, STAR, IGMP_JOIN_V6, result))

    step("r1: Verify PIM state")
    result = verify_pim_state(tgen,
                              dut,
                              oif,
                              iif,
                              IGMP_JOIN_V6,
                              expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "PIM state for group: {} is still Active \n Error: {}".format(
            tc_name, IGMP_JOIN_V6, result))

    step("r1: Verify ip mroutes")
    result = verify_mroutes(tgen,
                            dut,
                            STAR,
                            IGMP_JOIN_V6,
                            oif,
                            iif,
                            expected=False)
    assert result is not True, (
        "Testcase {} :Failed \n "
        "mroute ({}, {}) is still present \n Error: {}".format(
            tc_name, STAR, IGMP_JOIN_V6, result))

    step("r1: Verify show ip pim interface traffic without any IGMP join")
    state_after = verify_pim_interface_traffic(tgen,
                                               state_dict,
                                               addr_type="ipv6")
    assert isinstance(
        state_after, dict
    ), "Testcase{} : Failed \n state_before is not dictionary \n " "Error: {}".format(
        tc_name, result)

    result = verify_state_incremented(state_before, state_after)
    assert result is True, "Testcase{} : Failed Error: {}".format(
        tc_name, result)

    write_test_footer(tc_name)