def __init__(self, device, conf):
LenferController.__init__(self, device)
self._conf = conf
self.pin = Pin(conf['pin'], Pin.INOUT)
self.pin.value(0)
self.timers = []
self._schedule_params = None
self._timers_param = None
self._pulse_interval = conf.get('pulse_interval')
self._pulse_length = conf.get('pulse_length')
if conf.get('schedule_params'):
self._schedule_params = conf['schedule_params']
self._schedule_params_idx = [
self.device.schedule.param_idx(param)
for param in self._schedule_params
]
else:
self._timers_param = conf.get('timers_param') or 'timers'
if self.device.settings.get(self._timers_param):
self.init_timers()
if self._pulse_length:
self._on = False
uasyncio.get_event_loop().create_task(self.pulse_task())
self._log_prop_name = conf.get('log_prop_name') or self._timers_param
self.api = {'on': self.api_on}
if conf.get('api_buttons'):
self._api_buttons = []
for params in conf['api_buttons']:
self._api_buttons.append((Pin(params['pin'],
Pin.IN,
Pin.PULL_UP,
handler=self.on_api_button,
trigger=Pin.IRQ_FALLING,
debounce=500000), params))
def api_on(self, value=True, time=1000, manual=True):
logging.info('api_on value: %s time: %s manual: %s' %
(value, time, manual))
self.on(value)
if value and time:
uasyncio.get_event_loop().create_task(
self.delayed_off(time, manual=manual))
return value
def factory_reset_irq(self, pin):
LOG.info("factory reset irq %s" % pin.value())
if pin.value():
if self.status['factory_reset'] == 'pending':
self.status['factory_reset'] = 'cancel'
else:
if not self.status['factory_reset']:
self.status['factory_reset'] = 'pending'
uasyncio.get_event_loop().create_task(self.factory_reset())
async def get_wlan_settings(req, rsp):
if req.method == 'POST':
await req.read_json()
NETWORK_CONTROLLER._wlan.conf.update(req.json)
NETWORK_CONTROLLER._wlan.save_conf()
if DEVICE:
DEVICE.status["ssid_delay"] = True
uasyncio.get_event_loop().create_task(delayed_reset(5))
await send_json(rsp, {"reset": True})
else:
await send_json(rsp, NETWORK_CONTROLLER._wlan.conf)
def start_async(self):
loop = uasyncio.get_event_loop()
loop.create_task(self.bg_leds())
loop.create_task(self.check_wlan_switch())
if self._network._wlan and (self._network._wlan.mode == AP_IF
and self._network._wlan.conf['ssid']):
loop.create_task(self.delayed_ssid_switch())
for module_type in self.modules:
if module_type == 'climate' or module_type == 'power_monitor':
loop.create_task(self.modules[module_type].read())
if self.online():
loop.create_task(self.post_sensor_data())
elif module_type == 'relay_switch':
loop.create_task(self.modules['relay_switch'].adjust_switch())
elif module_type == 'gate':
loop.create_task(self.modules['gate'].adjust_switch())
elif module_type == 'rtc':
loop.create_task(self.modules['rtc'].adjust_time())
elif module_type == 'feeder':
loop.create_task(self.modules['feeder'].check_timers())
if self.online():
if self.id.get('updates'):
loop.create_task(self.post_log())
loop.create_task(self.check_updates())
if not self.id.get('disable_software_updates'):
loop.create_task(self.task_check_software_updates())
self.append_log_entries('device start')
async def monitorLED(self, debug=False):
"""coroutine for monitor event to change the LED color"""
print('''%s - %s: monitorLED Started''' % (self.name(), time()))
mainLoop = asyncio.get_event_loop()
mainLoop.create_task(self.setColor(self.LED_BLUE))
while True:
for pair, func, color, clear in self.ledServerList:
v = True
for event, test in pair:
v = event() == test and v
if v:
if debug:
print(
'''%s - %s: v is: %s, last color is: %s, current color is: %s'''
% (self._name, time(), v, self.lastColor, color))
if self.lastColor != color:
self.lastColor = color
mainLoop.create_task(func(color))
print('''%s - %s: added task to loop, color: %s''' %
(self._name, time(), color))
if clear != None:
clear.clear()
break
await asyncio.sleep_ms(80)
def on(self, value=True, source='manual', manual=False):
if manual:
source = 'manual'
if value:
self._active[source] = True
else:
if source in self._active:
del self._active[source]
if self.state != bool(self._active):
if self.state:
self.reverse = False
self.device.busy = self._active
RelaySwitchController.on(self, self._active, source == 'manual')
if 'manual' in self._active and len(
self._active) == 1 and self._power_monitor:
uasyncio.get_event_loop().create_task(self.check_current())
LOG.debug('Feeder state: %s' % self.state)
manage_memory()
async def monitorPump(self, debug=False):
"""coroutine for handling pump requests"""
print('''%s - %s: Monitor of pump started''' % (self._name, time()))
loopcount = 0
while True:
loopcount += 1
await asyncio.sleep_ms(50)
if debug:
print('''%s - %s: loop count: %s''' %
(self._name, time(), loopcount))
for event, func in self.pumpMonitorEvents:
if event.is_set():
mainLoop = asyncio.get_event_loop()
mainLoop.create_task(func(event.value()))
print('''%s - %s: added %s to loop %s''' %
(self._name, time(), event._name, func))
event.clear()
def start(self):
WDT(True)
self.ntp_sync()
if self.deepsleep():
loop = uasyncio.get_event_loop()
for module_type in self.modules:
if module_type == 'rtc':
loop.run_until_complete(
self.modules['rtc'].adjust_time(once=True))
machine.resetWDT()
elif module_type == 'climate':
loop.run_until_complete(
self.modules['climate'].read(once=True))
machine.resetWDT()
if self.online():
loop.run_until_complete(
self.post_sensor_data(once=True))
machine.resetWDT()
if self.modules['climate'].light:
loop.run_until_complete(
self.modules['climate'].adjust_light(once=True))
machine.resetWDT()
if self.online():
if self.id.get('updates'):
loop.run_until_complete(self.check_updates(once=True))
machine.resetWDT()
if not self.id.get('disable_software_updates'):
loop.run_until_complete(
self.task_check_software_updates(once=True))
machine.resetWDT()
if self.deepsleep():
if self._network:
self._network.off()
machine.deepsleep(self.deepsleep() * 60000)
self.start_async()
from WaterPumps.buttons import button
from WaterPumps.leds import triLed
pins = [4,5,12,13,14,15]
lakeButton = button(5, name='Lake Button')
parkButton = button(4, name='Park Button')
statusLed = triLed(redpin=13,bluepin=15,greenpin=12, name='statusLED')
#set button states
states = [state('pumpOff', event=Event())]
states.append(state('pumpOn', event=Event())
lakeButton.states.setStates(states)
states = [state('pumpOff', event=Event())]
states.append(state('pumpOn', event=Event())
parkButton.states.setStates(states)
#Get handle for event loop
main_loop = asyncio.get_event_loop()
#register led monitors
statusLed.registerLedClient(([(mainPump.pumpNotReadyEvent.is_set, True)],statusLed.setColor,statusLed.LED_YELLOW,None),0)
#Load tasks
main_loop.create_task(powerButton.monitorButton(startState='pumpOff',debug=False))
main_loop.create_task(statusLed.monitorLED())
#start main Loop
main_loop.run_forever()
main_loop.close()
import lib.uasyncio as uasyncio
import machine
import re
import ujson
import logging
from network_controller import NetworkController
from lenfer_device import LenferDevice
from utils import manage_memory, load_json
LOOP = uasyncio.get_event_loop()
LOG = logging.getLogger("Main")
async def wdt_feed():
await uasyncio.sleep(10)
machine.resetWDT()
LOOP.create_task(wdt_feed())
machine.WDT(True)
NETWORK_CONTROLLER = NetworkController()
if NETWORK_CONTROLLER.online():
software_version = load_json('version.json')
if software_version and software_version['update']:
from software_update import perform_software_update
perform_software_update()
machine.reset()
def addTasktoLoop(self, func, args):
"""add a func to main loop"""
import uasyncio as asyncio
buttonTask = func(self.event)
mainLoop = asyncio.get_event_loop()
mainLoop.create_task(buttonTask)
def on_off(self):
self.on()
uasyncio.get_event_loop().call_later(self.duration, self.off)
def onReceive(lora, payload):
try:
payload = payload.decode()
rssi = lora.packetRssi()
q.put_nowait([payload, rssi])
except Exception as e:
print('recieved failed')
raiseFailure()
print(e)
station = setupWifi()
mqtt_client = setupMqtt()
lora = setupLora()
lora.onReceive(onReceive)
lora.receive()
q = Queue()
loop = uasyncio.get_event_loop()
message_worker = loop.create_task(messageWorker(mqtt_client, station))
try:
loop.run_forever()
except KeyboardInterrupt:
pass
finally:
print("Closing Loop")
loop.close()
def _on_off(self):
uasyncio.get_event_loop().create_task(self.relay.run_for(
self.duration))
