Пример #1
0
    def run(self):
        """Start adding users"""

        dm = DirectoryManager(self.inst)
        conn = dm.bind()

        users = UserAccounts(conn, DEFAULT_SUFFIX)

        u_range = list(range(self.num_users))
        random.shuffle(u_range)

        for idx in u_range:
            try:
                users.create(
                    properties={
                        'uid': 'testuser%s' % idx,
                        'cn': 'testuser%s' % idx,
                        'sn': 'user%s' % idx,
                        'uidNumber': '%s' % (1000 + idx),
                        'gidNumber': '%s' % (1000 + idx),
                        'homeDirectory': '/home/testuser%s' % idx
                    })
            # One of the masters was probably put into read only mode - just break out
            except ldap.UNWILLING_TO_PERFORM:
                break
            except ldap.ALREADY_EXISTS:
                pass
        conn.close()
Пример #2
0
def test_ldbm_modification_audit_log(topology_st):
    """When updating LDBM config attributes, those attributes/values are not listed
    in the audit log

    :id: 5bf75c47-a283-430e-a65c-3c5fd8dbadb8
    :setup: Standalone Instance
    :steps:
        1. Bind as DM
        2. Enable audit log
        3. Update a set of config attrs in LDBM config
        4. Restart the server
        5. Check that config attrs are listed in the audit log
    :expectedresults:
        1. Operation successful
        2. Operation successful
        3. Operation successful
        4. Operation successful
        5. Audit log should contain modification of attrs"
    """

    VALUE = '10001'

    d_manager = DirectoryManager(topology_st.standalone)
    conn = d_manager.bind()
    config_ldbm = LDBMConfig(conn)

    log.info("Enable audit logging")
    conn.config.enable_log('audit')

    attrs = [
        'nsslapd-lookthroughlimit', 'nsslapd-pagedidlistscanlimit',
        'nsslapd-idlistscanlimit', 'nsslapd-db-locks'
    ]

    for attr in attrs:
        log.info("Set attribute %s to value %s" % (attr, VALUE))
        config_ldbm.set(attr, VALUE)

    log.info('Restart the server to flush the logs')
    conn.restart()

    for attr in attrs:
        log.info("Check if attribute %s is replaced in the audit log" % attr)
        assert conn.searchAuditLog('replace: %s' % attr)
        assert conn.searchAuditLog('%s: %s' % (attr, VALUE))
Пример #3
0
def test_rootdn_access_specific_time(topology_st,
                                     rootdn_setup,
                                     rootdn_cleanup,
                                     timeout=5):
    """Test binding inside and outside of a specific time

    :id: a0ef30e5-538b-46fa-9762-01a4435a15e8
    :setup: Standalone instance, rootdn plugin set up
    :steps:
        1. Get the current time, and bump it ahead twohours
        2. Bind as Root DN
        3. Set config to allow the entire day
        4. Bind as Root DN
        5. Cleanup
    :expectedresults:
        1. Success
        2. Should fail
        3. Success
        4. Success
        5. Success
    """

    log.info('Running test_rootdn_access_specific_time...')
    dm = DirectoryManager(topology_st.standalone)

    # Get the current time, and bump it ahead twohours
    current_hour = time.strftime("%H")
    if int(current_hour) > 12:
        open_time = '0200'
        close_time = '0400'
    else:
        open_time = '1600'
        close_time = '1800'

    assert plugin.replace_many(('rootdn-open-time', open_time),
                               ('rootdn-close-time', close_time))

    attr_updated = 0
    for i in range(0, timeout):
        if (plugin.get_attr_val_utf8('rootdn-open-time') == open_time) and (
                plugin.get_attr_val_utf8('rootdn-close-time') == close_time):
            attr_updated = 1
            break
        else:
            time.sleep(.5)

    if not attr_updated:
        raise Exception(
            "rootdn-open-time and rootdn-close-time were not updated")

    # Bind as Root DN - should fail
    for i in range(0, timeout):
        try:
            dm.bind()
        except ldap.UNWILLING_TO_PERFORM:
            break
        else:
            time.sleep(.5)

    # Set config to allow the entire day
    open_time = '0000'
    close_time = '2359'
    assert plugin.replace_many(('rootdn-open-time', open_time),
                               ('rootdn-close-time', close_time))

    attr_updated = 0
    for i in range(0, timeout):
        if (plugin.get_attr_val_utf8('rootdn-open-time') == open_time) and (
                plugin.get_attr_val_utf8('rootdn-close-time') == close_time):
            attr_updated = 1
            break
        else:
            time.sleep(.5)

    if not attr_updated:
        raise Exception(
            "rootdn-open-time and rootdn-close-time were not updated")

    # Bind as Root DN - should succeed
    for i in range(0, timeout):
        try:
            dm.bind()
            break
        except:
            time.sleep(.5)

    # Cleanup - undo the changes we made so the next test has a clean slate
    assert plugin.apply_mods([(ldap.MOD_DELETE, 'rootdn-open-time'),
                              (ldap.MOD_DELETE, 'rootdn-close-time')])
Пример #4
0
def test_rootdn_access_day_of_week(topology_st,
                                   rootdn_setup,
                                   rootdn_cleanup,
                                   timeout=5):
    """Test the days of week feature

    :id: a0ef30e5-538b-46fa-9762-01a4435a15e1
    :setup: Standalone instance, rootdn plugin set up
    :steps:
        1. Set the deny days
        2. Bind as Root DN
        3. Set the allow days
        4. Bind as Root DN
    :expectedresults:
        1. Success
        2. Should fail
        3. Success
        4. Success
    """

    log.info('Running test_rootdn_access_day_of_week...')
    dm = DirectoryManager(topology_st.standalone)

    days = ('Sun', 'Mon', 'Tue', 'Wed', 'Thu', 'Fri', 'Sat')
    day = int(time.strftime("%w", time.gmtime()))

    if day == 6:
        # Handle the roll over from Saturday into Sunday
        deny_days = days[1] + ', ' + days[2]
        allow_days = days[6] + ',' + days[0]
    elif day > 3:
        deny_days = days[0] + ', ' + days[1]
        allow_days = days[day] + ',' + days[day - 1]
    else:
        deny_days = days[4] + ',' + days[5]
        allow_days = days[day] + ',' + days[day + 1]

    log.info('Today:        ' + days[day])
    log.info('Allowed days: ' + allow_days)
    log.info('Deny days:    ' + deny_days)

    # Set the deny days
    plugin.set_days_allowed(deny_days)

    attr_updated = 0
    for i in range(0, timeout):
        if (str(plugin.get_days_allowed()) == deny_days):
            attr_updated = 1
            break
        else:
            time.sleep(.5)

    if not attr_updated:
        raise Exception("rootdn-days-allowed was not updated")

    # Bind as Root DN - should fail
    for i in range(0, timeout):
        try:
            dm.bind()
        except ldap.UNWILLING_TO_PERFORM:
            break
        else:
            time.sleep(.5)

    # Set the allow days
    plugin.set_days_allowed(allow_days)

    attr_updated = 0
    for i in range(0, timeout):
        if (str(plugin.get_days_allowed()) == allow_days):
            attr_updated = 1
            break
        else:
            time.sleep(.5)

    if not attr_updated:
        raise Exception("rootdn-days-allowed was not updated")

    # Bind as Root DN - should succeed
    for i in range(0, timeout):
        try:
            dm.bind()
            break
        except:
            time.sleep(.5)