def get_status(self, **kwargs):
"""Get a status report.
Returns a list of `(property, value, unit)` tuples.
"""
if self.device.product_id != 0x0c10:
LOGGER.debug('only the commander pro supports this')
return []
connected_temp_sensors = self._data.load('temp_sensors_connected',
default=[0] *
self._temp_probs)
fan_modes = self._data.load('fan_modes', default=[0] * self._fan_count)
# get the tempature sensor values
temp = [0] * self._temp_probs
for num, enabled in enumerate(connected_temp_sensors):
if enabled:
temp[num] = self._get_temp(num)
# get the real power supply voltages
res = self._send_command(_CMD_GET_VOLTS, [0])
volt_12 = u16be_from(res, offset=1) / 1000
res = self._send_command(_CMD_GET_VOLTS, [1])
volt_5 = u16be_from(res, offset=1) / 1000
res = self._send_command(_CMD_GET_VOLTS, [2])
volt_3 = u16be_from(res, offset=1) / 1000
# get fan RPMs of connected fans
fanspeeds = [0] * self._fan_count
for fan_num, mode in enumerate(fan_modes):
if mode == _FAN_MODE_DC or mode == _FAN_MODE_PWM:
fanspeeds[fan_num] = self._get_fan_rpm(fan_num)
status = [
('12 volt rail', volt_12, 'V'),
('5 volt rail', volt_5, 'V'),
('3.3 volt rail', volt_3, 'V'),
]
for temp_num in range(self._temp_probs):
status += [(f'Temp sensor {temp_num + 1}', temp[temp_num], '°C')]
for fan_num in range(self._fan_count):
status += [(f'Fan {fan_num + 1} speed', fanspeeds[fan_num], 'rpm')]
return status
def get_status(self, **kwargs):
"""Get a status report.
Returns a list of `(property, value, unit)` tuples.
"""
if self.device.product_id != 0x0c10:
_LOGGER.debug('only the Commander Pro supports this')
return []
temp_probes = self._data.load('temp_sensors_connected',
default=[0] * self._temp_probs)
fan_modes = self._data.load('fan_modes', default=[0] * self._fan_count)
status = []
# get the temperature sensor values
for i, probe_enabled in enumerate(temp_probes):
if probe_enabled:
temp = self._get_temp(i)
status.append((f'Temperature {i + 1}', temp, '°C'))
# get fan RPMs of connected fans
for i, fan_mode in enumerate(fan_modes):
if fan_mode == _FAN_MODE_DC or fan_mode == _FAN_MODE_PWM:
speed = self._get_fan_rpm(i)
status.append((f'Fan {i + 1} speed', speed, 'rpm'))
# get the real power supply voltages
for i, rail in enumerate(["+12V", "+5V", "+3.3V"]):
raw = self._send_command(_CMD_GET_VOLTS, [i])
voltage = u16be_from(raw, offset=1) / 1000
status.append((f'{rail} rail', voltage, 'V'))
return status
def _get_status_directly(self):
temp_probes = self._data.load('temp_sensors_connected', default=[0]*self._temp_probs)
fan_modes = self._data.load('fan_modes', default=[0]*self._fan_count)
status = []
# get the temperature sensor values
for i, probe_enabled in enumerate(temp_probes):
if probe_enabled:
temp = self._get_temp(i)
status.append((f'Temperature {i + 1}', temp, '°C'))
# get fan RPMs of connected fans
for i, fan_mode in enumerate(fan_modes):
if fan_mode == _FAN_MODE_DC or fan_mode == _FAN_MODE_PWM:
speed = self._get_fan_rpm(i)
status.append((f'Fan {i + 1} speed', speed, 'rpm'))
# get the real power supply voltages
for i, rail in enumerate(["+12V", "+5V", "+3.3V"]):
raw = self._send_command(_CMD_GET_VOLTS, [i])
voltage = u16be_from(raw, offset=1) / 1000
status.append((f'{rail} rail', voltage, 'V'))
return status
def _get_fan_rpm(self, fan_num):
"""This will get the rpm value of the fan.
fan number MUST be in range of 0-5
"""
if self._fan_count == 0:
raise ValueError('this device does not have any fans')
if fan_num < 0 or fan_num > 5:
raise ValueError(f'fan_num {fan_num} invalid, must be between 0 and 5')
res = self._send_command(_CMD_GET_FAN_RPM, [fan_num])
speed = u16be_from(res, offset=1)
return speed
def _get_temp(self, sensor_num):
"""This will get the temperature in degrees celsius for the specified temp sensor.
sensor number MUST be in range of 0-3
"""
if self._temp_probs == 0:
raise ValueError('this device does not have a temperature sensor')
if sensor_num < 0 or sensor_num > 3:
raise ValueError(f'sensor_num {sensor_num} invalid, must be between 0 and 3')
res = self._send_command(_CMD_GET_TEMP, [sensor_num])
temp = u16be_from(res, offset=1) / 100
return temp
