class PeerService:
"""Peer Service 의 gRPC 인터페이스를 구현한다.
서비스 루프 및 공통 요소는 commonservice 를 통해서 처리한다.
"""
def __init__(self,
group_id=None,
radio_station_ip=conf.IP_RADIOSTATION,
radio_station_port=conf.PORT_RADIOSTATION,
cert_path=None,
cert_pass=None):
"""Peer는 Radio Station 에 접속하여 leader 및 다른 Peer에 대한 접속 정보를 전달 받는다.
:param group_id: Peer Group 을 구분하기 위한 ID, None 이면 Single Peer Group 이 된다. (peer_id is group_id)
conf.PEER_GROUP_ID 를 사용하면 configure 파일에 저장된 값을 group_id 로 사용하게 된다.
:param radio_station_ip: RS IP
:param radio_station_port: RS Port
:param cert_path: Peer 인증서 디렉토리 경로
:param cert_pass: Peer private key password
:return:
"""
self.__handler_map = {
message_code.Request.status: self.__handler_status,
message_code.Request.peer_peer_list: self.__handler_peer_list
}
self.__peer_type = loopchain_pb2.PEER
self.__send_to_process_thread = None
self.__radio_station_target = radio_station_ip + ":" + str(
radio_station_port)
self.__stub_to_radio_station = None
logging.info("Set Radio Station target is " +
self.__radio_station_target)
self.__peer_id = None
self.__group_id = group_id
if self.__group_id is None and conf.PEER_GROUP_ID != "":
self.__group_id = conf.PEER_GROUP_ID
self.__common_service = None
self.__peer_manager = None
self.__block_manager = None
self.__score_service = None
self.__rest_service = None
self.__tx_service = None
# Channel and Stubs for Servers, It can be set after serve()
self.__stub_to_blockgenerator = None
self.__stub_to_score_service = None
# TODO peer 서비스의 .__score를 삭제, set chain code 테스트에서만 쓰인다. (검토후 제거할 것)
self.__score = None
self.__score_info = None
self.__peer_target = None
self.__inner_target = None
self.__peer_port = 0
self.__block_height_sync_lock = False
# For Send tx to leader
self.__tx_process = None
self.__auth = PeerAuthorization()
# gRPC service for Peer
self.__inner_service = InnerService()
self.__outer_service = OuterService()
# 인증서 저장
if cert_path is not None:
self.__auth.load_pki(cert_path, cert_pass)
self.__reset_voter_in_progress = False
@property
def common_service(self):
return self.__common_service
@property
def block_manager(self):
return self.__block_manager
# TODO peer_manager 로 이름을 변경하였으나 수정 범위가 광범위 하여 기존 이름 임시로 유지함
# 점차적으로 적용하여 리팩토링 범위를 축소한 후 모두 처리한 다음 제거할 것
@property
def peer_list(self):
return self.__peer_manager
@property
def peer_manager(self):
return self.__peer_manager
@property
def stub_to_score_service(self):
return self.__stub_to_score_service
@property
def score_info(self):
return self.__score_info
@property
def send_to_process_thread(self):
return self.__send_to_process_thread
@property
def peer_type(self):
return self.__peer_type
@property
def auth(self):
return self.__auth
@property
def stub_to_blockgenerator(self):
return self.__stub_to_blockgenerator
@property
def stub_to_radiostation(self):
return self.__stub_to_radio_station
def __handler_status(self, request, context):
return loopchain_pb2.Message(code=message_code.Response.success)
def __handler_peer_list(self, request, context):
message = "All Group Peers count: " + str(
len(self.__peer_manager.peer_list[conf.ALL_GROUP_ID]))
return loopchain_pb2.Message(code=message_code.Response.success,
message=message,
meta=str(self.__peer_manager.peer_list))
def rotate_next_leader(self):
"""Find Next Leader Id from peer_list and reset leader to that peer
:return:
"""
# logging.debug("rotate next leader...")
next_leader = self.__peer_manager.get_next_leader_peer(
is_only_alive=True)
# Check Next Leader is available...
if next_leader is not None and next_leader.peer_id != self.peer_id:
try:
stub_manager = self.__peer_manager.get_peer_stub_manager(
next_leader)
response = stub_manager.call(
"GetStatus",
loopchain_pb2.StatusRequest(request="get_leader_peer"),
is_stub_reuse=False)
# Peer 가 leader 로 변경되는데 시간이 필요함으로 접속 여부만 확인한다.
# peer_status = json.loads(response.status)
# if peer_status["peer_type"] != str(loopchain_pb2.BLOCK_GENERATOR):
# logging.warning("next rotate is not a leader")
# raise Exception
except Exception as e:
logging.warning(f"rotate next leader exceptions({e})")
next_leader = self.__peer_manager.leader_complain_to_rs(
conf.ALL_GROUP_ID)
if next_leader is not None:
self.reset_leader(next_leader.peer_id)
def reset_leader(self, new_leader_id):
logging.warning("RESET LEADER: " + str(new_leader_id))
complained_leader = self.__peer_manager.get_leader_peer()
leader_peer = self.__peer_manager.get_peer(new_leader_id, None)
if leader_peer is None:
logging.warning(
f"in peer_service::reset_leader There is no peer by peer_id({new_leader_id})"
)
return
self.__peer_manager.set_leader_peer(leader_peer, None)
peer_self = self.__peer_manager.get_peer(self.peer_id)
peer_leader = self.__peer_manager.get_leader_peer()
if peer_self.target == peer_leader.target:
logging.debug("Set Peer Type Block Generator!")
self.__peer_type = loopchain_pb2.BLOCK_GENERATOR
self.__block_manager.get_blockchain().reset_made_block_count()
# TODO 아래 코드는 중복된 의미이다. 하지만, leader 가 변경되길 기다리는 코드로 의미를 명확히 할 경우
# 블록체인 동작 지연으로 인한 오류가 발생한다. 우선 더 안정적인 테스트 결과를 보이는 상태로 유지한다.
response = self.peer_list.get_peer_stub_manager(peer_self).call(
"GetStatus",
loopchain_pb2.StatusRequest(request="reset_leader"),
is_stub_reuse=True)
status_json = json.loads(response.status)
if status_json['peer_type'] == str(loopchain_pb2.BLOCK_GENERATOR):
is_broadcast = True
else:
is_broadcast = False
self.__peer_manager.announce_new_leader(complained_leader.peer_id,
new_leader_id,
is_broadcast=is_broadcast)
else:
logging.debug("Set Peer Type Peer!")
self.__peer_type = loopchain_pb2.PEER
self.__stub_to_blockgenerator = self.__peer_manager.get_peer_stub_manager(
peer_leader)
# 새 leader 에게 subscribe 하기
self.__common_service.subscribe(self.__stub_to_blockgenerator,
loopchain_pb2.BLOCK_GENERATOR)
self.__common_service.set_peer_type(self.__peer_type)
# update candidate blocks
self.__block_manager.get_candidate_blocks().set_last_block(
self.__block_manager.get_blockchain().last_block)
self.__block_manager.set_peer_type(self.__peer_type)
if self.__tx_process is not None:
# peer_process 의 남은 job 을 처리한다. (peer->leader 인 경우),
# peer_process 를 리더 정보를 변경한다. (peer->peer 인 경우)
self.__tx_process_connect_to_leader(self.__tx_process,
peer_leader.target)
def show_peers(self):
logging.debug("Peers: ")
for peer in self.__peer_manager.get_IP_of_peers_in_group():
logging.debug("peer_target: " + peer)
def __load_score(self, score):
"""스코어를 로드한다.
:param score: score package name
"""
if self.__score_info is None:
logging.info("LOAD SCORE AND CONNECT TO SCORE SERVICE!")
params = dict()
params[message_code.MetaParams.ScoreLoad.
repository_path] = conf.DEFAULT_SCORE_REPOSITORY_PATH
params[message_code.MetaParams.ScoreLoad.score_package] = score
params[message_code.MetaParams.ScoreLoad.
base] = conf.DEFAULT_SCORE_BASE
params[message_code.MetaParams.ScoreLoad.peer_id] = self.__peer_id
meta = json.dumps(params)
if self.__stub_to_score_service is None:
logging.error(f"there is no __stub_to_scoreservice!")
return False
# Score Load is so slow ( load time out is more than GRPC_CONNECTION_TIMEOUT)
response = self.__stub_to_score_service.call(
"Request",
loopchain_pb2.Message(code=message_code.Request.score_load,
meta=meta), conf.SCORE_LOAD_TIMEOUT)
logging.debug("try score load on score service: " + str(response))
response_connect = self.__stub_to_score_service.call(
"Request",
loopchain_pb2.Message(code=message_code.Request.score_connect,
message=self.__peer_target),
conf.GRPC_CONNECTION_TIMEOUT)
logging.debug("try connect to score service: " +
str(response_connect))
if response.code == message_code.Response.success:
logging.debug("Get Score from Score Server...")
self.__score_info = json.loads(response.meta)
else:
logging.error("Fail Get Score from Score Server...")
return False
logging.info("LOAD SCORE DONE!")
else:
logging.info(
"PEER SERVICE HAS SCORE BUT LOAD SCORE FUNCTION CALL!")
score_dump = pickle.dumps(self.__score)
response = self.__stub_to_score_service.call(
"Request",
loopchain_pb2.Message(code=message_code.Request.score_set,
object=score_dump))
if response.code != message_code.Response.success:
logging.error("Fail Set Score!!")
logging.info("LOAD SCORE DONE!")
return True
def service_stop(self):
self.__block_manager.stop()
self.__common_service.stop()
def score_invoke(self, block):
block_object = pickle.dumps(block)
try:
response = self.__stub_to_score_service.call(
"Request",
loopchain_pb2.Message(code=message_code.Request.score_invoke,
object=block_object))
# logging.debug("Score Server says: " + str(response))
if response.code == message_code.Response.success:
return json.loads(response.meta)
else:
raise ScoreInvokeError('score process grpc fail')
except Exception as e:
logging.warning("fail score invoke: " + str(e))
return False
def __load_block_manager(self):
try:
block_manager = BlockManager(self.__common_service)
return block_manager
except leveldb.LevelDBError as e:
util.exit_and_msg("LevelDBError(" + str(e) + ")")
def __connect_to_radiostation(self):
"""RadioStation 접속
:return: 접속정보, 실패시 None
"""
logging.debug("try to connect to radiostation")
self.__stub_to_radio_station = StubManager.get_stub_manager_to_server(
self.__radio_station_target, loopchain_pb2_grpc.RadioStationStub,
conf.CONNECTION_RETRY_TIMEOUT_TO_RS)
if self.__stub_to_radio_station is None:
logging.warning("fail make stub to Radio Station!!")
return None
token = None
if self.__auth.is_secure:
peer_self = self.__peer_manager.get_peer(self.peer_id)
token = None
if peer_self is not None:
token = peer_self.token
logging.debug("Self Peer Token : %s", token)
# 토큰 유효시간이 지나면 다시 생성 요청
if token is not None and self.__auth.get_token_time(token) is None:
token = None
self.__auth.set_peer_info(self.peer_id, self.__peer_target,
self.group_id, self.__peer_type)
cert_bytes = self.__auth.get_cert_bytes()
if token is None:
# 서버로부터 난수 수신
# response = util.request_server_in_time(self.__stub_to_radio_station.ConnectPeer,
# loopchain_pb2.PeerRequest(
# peer_object=b'',
# peer_id=self.peer_id,
# peer_target=self.__peer_target,
# group_id=self.group_id,
# peer_type=self.__peer_type,
# token=conf.TOKEN_TYPE_CERT + cert_bytes.hex())
# )
response = self.__stub_to_radio_station.call(
"ConnectPeer",
loopchain_pb2.PeerRequest(peer_object=b'',
peer_id=self.peer_id,
peer_target=self.__peer_target,
group_id=self.group_id,
peer_type=self.__peer_type,
token=conf.TOKEN_TYPE_CERT +
cert_bytes.hex()),
conf.GRPC_TIMEOUT)
rand_key = None
if response is not None and response.status == message_code.Response.success:
logging.debug("Received Random : %s", response.more_info)
if len(response.more_info) is not 32:
# 토큰 크기가 16바이트가 아니면 접속을 할 수 없습니다.
logging.debug('서버로부터 수신한 토큰 길이는 16바이트가 되어야 합니다.')
else:
rand_key = response.more_info
else:
return response
# 난수와 Peer 정보에 서명
if rand_key is None:
return None
else:
sign = self.__auth.generate_request_sign(rand_key=rand_key)
token = conf.TOKEN_TYPE_SIGN + sign.hex()
else:
self.__auth.add_token(token)
# 공통 부분
# response = util.request_server_in_time(self.__stub_to_radio_station.ConnectPeer,
# loopchain_pb2.PeerRequest(
# peer_object=b'',
# peer_id=self.peer_id,
# peer_target=self.__peer_target,
# group_id=self.group_id,
# peer_type=self.__peer_type,
# token=token
# ))
response = self.__stub_to_radio_station.call(
"ConnectPeer",
loopchain_pb2.PeerRequest(peer_object=b'',
peer_id=self.peer_id,
peer_target=self.__peer_target,
group_id=self.group_id,
peer_type=self.__peer_type,
token=token),
conf.GRPC_CONNECTION_TIMEOUT)
if response is not None and response.status == message_code.Response.success:
if self.__auth.is_secure:
logging.debug("Received Token : %s", response.more_info)
# Radiostation으로부터 수신한 토큰 검증
if len(response.more_info) < 9:
# 토큰 크기가 8 + 1바이트 보다 크지 아니면 접속을 할 수 없습니다.
logging.debug('서버로부터 수신한 토큰 길이는 9바이트 이상이 되어야 합니다.')
response.status = message_code.Response.fail_validate_params
response.more_info = "Invalid Token Data"
else:
token = response.more_info
tag = token[:2]
if tag == conf.TOKEN_TYPE_TOKEN:
if self.__auth.verify_token(token):
logging.debug("토큰 검증에 성공하였습니다.")
self.__auth.add_token(token)
else:
logging.debug("토큰 검증에 실패하였습니다.")
response.status = message_code.Response.fail_validate_params
response.more_info = "Invalid Token Signature"
return response
def add_unconfirm_block(self, block_unloaded):
block = pickle.loads(block_unloaded)
block_hash = block.block_hash
response_code, response_msg = message_code.get_response(
message_code.Response.fail_validate_block)
# block 검증
block_is_validated = False
try:
block_is_validated = block.validate()
except (BlockInValidError, BlockError, TransactionInValidError) as e:
logging.error(e)
if block_is_validated:
# broadcast 를 받으면 받은 블럭을 검증한 후 검증되면 자신의 blockchain 의 unconfirmed block 으로 등록해 둔다.
confirmed, reason = self.__block_manager.get_blockchain(
).add_unconfirm_block(block)
if confirmed:
response_code, response_msg = message_code.get_response(
message_code.Response.success_validate_block)
elif reason == "block_height":
# Announce 되는 블럭과 자신의 height 가 다르면 Block Height Sync 를 다시 시도한다.
self.block_height_sync(self.__stub_to_blockgenerator)
return response_code, response_msg, block_hash
def __tx_process_connect_to_leader(self, peer_process, leader_target):
logging.debug("try... Peer Process connect_to_blockgenerator: " +
leader_target)
logging.debug("peer_process: " + str(peer_process))
peer_process.send_to_process(
("connect_to_blockgenerator", leader_target))
def __run_tx_process(self, blockgenerator_info, inner_channel_info):
tx_process = TxProcess()
tx_process.start()
tx_process.send_to_process(("status", ""))
wait_times = 0
wait_for_process_start = None
while wait_for_process_start is None:
time.sleep(conf.SLEEP_SECONDS_FOR_SUB_PROCESS_START)
logging.debug(f"wait start tx process....")
wait_for_process_start = tx_process.get_receive("status")
if wait_for_process_start is None and wait_times > conf.WAIT_SUB_PROCESS_RETRY_TIMES:
util.exit_and_msg("Tx Process start Fail!")
logging.debug(f"Tx Process start({wait_for_process_start})")
self.__tx_process_connect_to_leader(tx_process, blockgenerator_info)
tx_process.send_to_process(
("make_self_connection", inner_channel_info))
return tx_process
def __stop_tx_process(self):
if self.__tx_process is not None:
self.__tx_process.stop()
self.__tx_process.wait()
@property
def peer_id(self):
return self.__peer_id
@peer_id.setter
def peer_id(self, peer_id):
self.__peer_id = peer_id
@property
def group_id(self):
if self.__group_id is None:
self.__group_id = self.__peer_id
return self.__group_id
@property
def peer_list(self):
return self.__peer_manager
@property
def peer_target(self):
return self.__peer_target
def block_height_sync(self, target_peer_stub=None):
"""Peer간의 데이타 동기화
"""
if self.__block_height_sync_lock is True:
# ***** 이 보정 프로세스는 AnnounceConfirmBlock 메시지를 받았을때 블럭 Height 차이로 Peer 가 처리하지 못한 경우에도 진행한다.
# 따라서 이미 sync 가 진행 중일때의 요청은 무시한다.
logging.warning("block height sync is already running...")
return
self.__block_height_sync_lock = True
if target_peer_stub is None:
target_peer_stub = self.__stub_to_blockgenerator
### Block Height 보정 작업, Peer의 데이타 동기화 Process ###
### Love&Hate Algorithm ###
logging.info("try block height sync...with love&hate")
# Make Peer Stub List [peer_stub, ...] and get max_height of network
max_height = 0
peer_stubs = []
for peer_target in self.__peer_manager.get_IP_of_peers_in_group():
target = ":".join(peer_target.split(":")[1:])
if target != self.__peer_target:
logging.debug(f"try to target({target})")
channel = grpc.insecure_channel(target)
stub = loopchain_pb2_grpc.PeerServiceStub(channel)
try:
response = stub.GetStatus(
loopchain_pb2.StatusRequest(request=""))
if response.block_height > max_height:
# Add peer as higher than this
max_height = response.block_height
peer_stubs.append(stub)
except Exception as e:
logging.warning("Already bad.... I don't love you" +
str(e))
my_height = self.__block_manager.get_blockchain().block_height
if max_height > my_height: # 자기가 가장 높은 블럭일때 처리 필요 TODO
logging.info(
f"You need block height sync to: {max_height} yours: {my_height}"
)
# 자기(현재 Peer)와 다르면 Peer 목록을 순회하며 마지막 block 에서 자기 Height Block 까지 역순으로 요청한다.
# (blockchain 의 block 탐색 로직 때문에 height 순으로 조회는 비효율적이다.)
preload_blocks = {} # height : block dictionary
# Target Peer 의 마지막 block hash 부터 시작한다.
response = target_peer_stub.call(
"GetLastBlockHash", loopchain_pb2.StatusRequest(request=""))
logging.debug(response)
request_hash = response.block_hash
max_try = max_height - my_height
while self.__block_manager.get_blockchain(
).last_block.block_hash != request_hash and max_try > 0:
for peer_stub in peer_stubs:
response = None
try:
# 이때 요청 받은 Peer 는 해당 Block 과 함께 자신의 현재 Height 를 같이 보내준다.
# TODO target peer 의 마지막 block 보다 높은 Peer 가 있으면 현재 target height 까지 완료 후
# TODO Height Sync 를 다시 한다.
response = peer_stub.BlockSync(
loopchain_pb2.BlockSyncRequest(
block_hash=request_hash), conf.GRPC_TIMEOUT)
except Exception as e:
logging.warning("There is a bad peer, I hate you: " +
str(e))
if response is not None and response.response_code == message_code.Response.success:
dump = response.block
block = pickle.loads(dump)
# 마지막 블럭에서 역순으로 블럭을 구한다.
request_hash = block.prev_block_hash
# add block to preload_blocks
logging.debug("Add preload_blocks Height: " +
str(block.height))
preload_blocks[block.height] = block
if response.max_block_height > max_height:
max_height = response.max_block_height
if (my_height + 1) == block.height:
max_try = 0 # 더이상 요청을 진행하지 않는다.
logging.info("Block Height Sync Complete.")
break
max_try -= 1
else:
# 이 반복 요청중 응답 하지 않은 Peer 는 반복중에 다시 요청하지 않는다.
# (TODO: 향후 Bad에 대한 리포트 전략은 별도로 작업한다.)
peer_stubs.remove(peer_stub)
logging.warning(
"Make this peer to bad (error above or no response): "
+ str(peer_stub))
if preload_blocks.__len__() > 0:
while my_height < max_height:
add_height = my_height + 1
logging.debug("try add block height: " + str(add_height))
try:
self.__block_manager.add_block(
preload_blocks[add_height])
my_height = add_height
except KeyError as e:
logging.error("fail block height sync: " + str(e))
break
except exception.BlockError as e:
logging.error(
"Block Error Clear all block and restart peer.")
self.__block_manager.clear_all_blocks()
util.exit_and_msg(
"Block Error Clear all block and restart peer.")
if my_height < max_height:
# block height sync 가 완료되지 않았으면 다시 시도한다.
logging.warning(
"fail block height sync in one time... try again...")
self.__block_height_sync_lock = False
self.block_height_sync(target_peer_stub)
self.__block_height_sync_lock = False
def reset_voter_count(self):
"""peer_list 의 활성화 상태(gRPC 응답)을 갱신하여 voter 수를 변경한다.
:return:
"""
if self.__reset_voter_in_progress is not True:
self.__reset_voter_in_progress = True
logging.debug("reset voter count before: " +
str(self.__common_service.get_voter_count()))
# TODO peer_list 를 순회하면서 gRPC 오류인 사용자를 remove_audience 한다.
self.__peer_manager.reset_peers(
None, self.__common_service.remove_audience)
logging.debug("reset voter count after: " +
str(self.__common_service.get_voter_count()))
self.__reset_voter_in_progress = False
def set_chain_code(self, score):
"""Score를 패스로 전달하지 않고 (serve(...)의 score 는 score 의 파일 Path 이다.)
Object 를 직접 할당하기 위한 인터페이스로 serve 호출전에 지정되어야 한다.
:param score: score Object
"""
# TODO 현재는 테스트를 위해서만 사용되고 있다. 검토후 제거 할 것
self.__score = score
self.__score_info = dict()
self.__score_info[
message_code.MetaParams.ScoreInfo.score_id] = self.__score.id()
self.__score_info[message_code.MetaParams.ScoreInfo.
score_version] = self.__score.version()
def __port_init(self, port):
# service 초기화 작업
self.__peer_target = util.get_private_ip() + ":" + str(port)
self.__inner_target = conf.IP_LOCAL + ":" + str(port)
self.__peer_port = int(port)
# SCORE Service check Using Port
# check Port Using
if util.check_port_using(conf.IP_PEER,
int(port) + conf.PORT_DIFF_SCORE_CONTAINER):
util.exit_and_msg('Score Service Port is Using ' +
str(int(port) + conf.PORT_DIFF_SCORE_CONTAINER))
def __run_inner_services(self, port):
if conf.ENABLE_REST_SERVICE:
self.__rest_service = RestService(int(port))
self.__score_service = ScoreService(
int(port) + conf.PORT_DIFF_SCORE_CONTAINER)
# TODO tx service 는 더이상 사용하지 않는다. 하지만 이 로직을 제거하면 블록체인 네트워크가 정상적으로 형성되지 않는
# 버그가 발생한다. 원인 파악 필요함
self.__tx_service = TxService(int(port) + conf.PORT_DIFF_TX_CONTAINER)
# TODO stub to score service Connect 확인을 util 로 할 수 있게 수정하기
# self.__stub_to_score_service = util.get_stub_to_server('localhost:' +
# str(int(port) + conf.PORT_DIFF_SCORE_CONTAINER),
# loopchain_pb2_grpc.ContainerStub)
self.__stub_to_score_service = StubManager.get_stub_manager_to_server(
conf.IP_PEER + ':' +
str(int(port) + conf.PORT_DIFF_SCORE_CONTAINER),
loopchain_pb2_grpc.ContainerStub,
is_allow_null_stub=True)
def serve(self, port, score=conf.DEFAULT_SCORE_PACKAGE):
"""피어 실행
:param port: 피어의 실행포트
:param score: 피어의 실행 체인코드
"""
stopwatch_start = timeit.default_timer()
is_all_service_safe_start = True
is_delay_announce_new_leader = False
self.__port_init(port)
self.__run_inner_services(port)
inner_service_port = conf.PORT_INNER_SERVICE or (
int(port) + conf.PORT_DIFF_INNER_SERVICE)
self.__common_service = CommonService(loopchain_pb2,
self.__peer_target,
inner_service_port)
self.peer_id = str(self.__common_service.get_peer_id())
self.__peer_manager = self.__common_service.load_peer_manager()
self.__block_manager = self.__load_block_manager()
response = self.__connect_to_radiostation()
logging.debug("Connect to radiostation: " + str(response))
is_peer_list_from_rs = False
if response is not None and response.status == message_code.Response.success:
# RS 의 응답이 있으면 peer_list 는 RS 가 전달한 결과로 업데이트 된다.
# 없는 경우 local 의 level DB 로 부터 읽어드린 값을 default 로 사용하게 된다.
# TODO RS 는 어떻게 신뢰하지? RS 가 새로운 피어의 참여를 승인하더라도 참여한 피어 목록은 더 신뢰할만한 방식으로 보호가 필요하지 않나?
# 누군가 RS 를 죽인다면 RS 인척 가짜로 이루어진 피어 리스트를 전송하면 네트워크를 파괴할 수 있지 않나?
# 피어의 참여는 RS 가 승인한 다음 블록에 담아서 블록체인에 추가하면 어떨까?
peer_list_data = pickle.loads(response.peer_list)
self.__peer_manager.load(peer_list_data, False)
self.__common_service.save_peer_list(self.__peer_manager)
logging.debug("peer list update: " +
self.__peer_manager.get_peers_for_debug())
is_peer_list_from_rs = True
else:
logging.debug("using local peer list: " +
self.__peer_manager.get_peers_for_debug())
logging.debug("peer_id: " + str(self.peer_id))
if self.__peer_manager.get_peer_count() == 0:
util.exit_and_msg(
"There is no peer_list, initial network is not allowed without RS!"
)
peer_self = self.__peer_manager.get_peer(self.peer_id, self.group_id)
logging.debug("peer_self: " + str(peer_self))
peer_leader = self.__peer_manager.get_leader_peer(
is_complain_to_rs=True)
logging.debug("peer_leader: " + str(peer_leader))
# TODO LOOPCHAIN-61 인증서 로드
_cert = None
# TODO LOOPCHAIN-61 인증서 키로드
_private_key = None
# TODO 인증정보 요청
# TODO 이 부분을 조건 검사가 아니라 leader complain 을 이용해서 리더가 되도록 하는 방법 검토하기
if peer_self.peer_id == peer_leader.peer_id:
# 자기가 peer_list 의 유일한 connected PEER 이거나 rs 의 leader 정보와 같을 때 block generator 가 된다.
if is_peer_list_from_rs is True or self.__peer_manager.get_connected_peer_count(
None) == 1:
logging.debug("Set Peer Type Block Generator!")
self.__peer_type = loopchain_pb2.BLOCK_GENERATOR
# load score 는 score 서비스가 시작된 이후 block height sync 가 시작되기전에 이루어져야 한다.
is_all_service_safe_start &= self.__load_score(score)
if self.__peer_type == loopchain_pb2.PEER:
# leader 로 시작하지 않았는데 자신의 정보가 leader Peer 정보이면 block height sync 하여
# 최종 블럭의 leader 를 찾는다.
if peer_leader.target != self.__peer_target:
block_sync_target_stub = StubManager.get_stub_manager_to_server(
peer_leader.target,
loopchain_pb2_grpc.PeerServiceStub,
time_out_seconds=conf.GRPC_TIMEOUT)
else:
block_sync_target_stub = None
if block_sync_target_stub is None:
logging.warning(
"You maybe Older from this network... or No leader in this network!"
)
# TODO 이 상황에서 rs 에 leader complain 을 진행한다
is_delay_announce_new_leader = True
peer_old_leader = peer_leader
peer_leader = self.__peer_manager.leader_complain_to_rs(
conf.ALL_GROUP_ID, is_announce_new_peer=False)
if peer_leader is not None:
block_sync_target_stub = StubManager.get_stub_manager_to_server(
peer_leader.target,
loopchain_pb2_grpc.PeerServiceStub,
time_out_seconds=conf.GRPC_TIMEOUT)
if peer_leader is None or peer_leader.peer_id == peer_self.peer_id:
peer_leader = peer_self
self.__peer_type = loopchain_pb2.BLOCK_GENERATOR
else:
self.block_height_sync(block_sync_target_stub)
# # TODO 마지막 블럭으로 leader 정보를 판단하는 로직은 리더 컴플레인 알고리즘 수정 후 유효성을 다시 판단할 것
# last_block_peer_id = self.__block_manager.get_blockchain().last_block.peer_id
#
# if last_block_peer_id != "" and last_block_peer_id != self.__peer_list.get_leader_peer().peer_id:
# logging.debug("make leader stub after block height sync...")
# new_leader_peer = self.__peer_list.get_peer(last_block_peer_id)
#
# if new_leader_peer is None:
# new_leader_peer = self.__peer_list.leader_complain_to_rs(conf.ALL_GROUP_ID)
#
# self.__peer_list.set_leader_peer(new_leader_peer, None)
# # TODO 리더가 상단의 next_leader_pear 와 같을 경우 stub 을 재설정하게 되는데 문제 없는지 확인 할 것
# self.__stub_to_blockgenerator = self.__peer_list.get_peer_stub_manager(new_leader_peer)
# peer_leader = new_leader_peer
# else:
# self.__stub_to_blockgenerator = block_sync_target_stub
self.__stub_to_blockgenerator = block_sync_target_stub
if self.__stub_to_blockgenerator is None:
util.exit_and_msg("Fail connect to leader!!")
self.show_peers()
self.__common_service.set_peer_type(self.__peer_type)
if self.__peer_type == loopchain_pb2.BLOCK_GENERATOR:
self.__block_manager.set_peer_type(self.__peer_type)
loopchain_pb2_grpc.add_PeerServiceServicer_to_server(
self.__outer_service, self.__common_service.outer_server)
loopchain_pb2_grpc.add_InnerServiceServicer_to_server(
self.__inner_service, self.__common_service.inner_server)
logging.info("Start peer service at port: " + str(port))
self.__block_manager.start()
self.__common_service.start(port, self.peer_id, self.group_id)
if self.__stub_to_radio_station is not None:
self.__common_service.subscribe(self.__stub_to_radio_station)
# Start Peer Process for gRPC send to Block Generator
# But It use only when create tx (yet)
logging.debug("peer_leader target is: " + str(peer_leader.target))
self.__tx_process = self.__run_tx_process(
blockgenerator_info=peer_leader.target,
inner_channel_info=conf.IP_LOCAL + ":" + str(inner_service_port))
if self.__stub_to_blockgenerator is not None:
self.__common_service.subscribe(self.__stub_to_blockgenerator,
loopchain_pb2.BLOCK_GENERATOR)
if is_delay_announce_new_leader:
self.__peer_manager.announce_new_leader(peer_old_leader.peer_id,
peer_leader.peer_id)
self.__send_to_process_thread = SendToProcess(self.__tx_process)
self.__send_to_process_thread.start()
stopwatch_duration = timeit.default_timer() - stopwatch_start
logging.info(
f"Start Peer Service start duration({stopwatch_duration})")
# service 종료를 기다린다.
if is_all_service_safe_start:
self.__common_service.wait()
else:
self.service_stop()
self.__send_to_process_thread.stop()
self.__send_to_process_thread.wait()
logging.info("Peer Service Ended.")
self.__score_service.stop()
if self.__rest_service is not None:
self.__rest_service.stop()
self.__tx_service.stop()
self.__stop_tx_process()
class PeerService:
"""Peer Service 의 main Class
outer 와 inner gRPC 인터페이스를 가진다.
서비스 루프 및 공통 요소는 commonservice 를 통해서 처리한다.
channel 관련 instance 는 channel manager 를 통해서 관리한다.
"""
def __init__(self,
group_id=None,
radio_station_ip=None,
radio_station_port=None,
public_path=None,
private_path=None,
cert_pass=None):
"""Peer는 Radio Station 에 접속하여 leader 및 다른 Peer에 대한 접속 정보를 전달 받는다.
:param group_id: Peer Group 을 구분하기 위한 ID, None 이면 Single Peer Group 이 된다. (peer_id is group_id)
conf.PEER_GROUP_ID 를 사용하면 configure 파일에 저장된 값을 group_id 로 사용하게 된다.
:param radio_station_ip: RS IP
:param radio_station_port: RS Port
:param public_path: Peer 인증서 디렉토리 경로
:param private_path: Cert Private key
:param cert_pass: Peer private key password
:return:
"""
if radio_station_ip is None:
radio_station_ip = conf.IP_RADIOSTATION
if radio_station_port is None:
radio_station_port = conf.PORT_RADIOSTATION
if public_path is None:
public_path = conf.PUBLIC_PATH
if private_path is None:
private_path = conf.PRIVATE_PATH
if cert_pass is None:
cert_pass = conf.DEFAULT_PW
util.logger.spam(f"Your Peer Service runs on debugging MODE!")
util.logger.spam(
f"You can see many terrible garbage logs just for debugging, R U Really want it?"
)
self.__send_to_process_thread = SendToProcess()
self.__radio_station_target = radio_station_ip + ":" + str(
radio_station_port)
logging.info("Set Radio Station target is " +
self.__radio_station_target)
self.__stub_to_radio_station = None
self.__level_db = None
self.__level_db_path = ""
self.__peer_id = None
self.__group_id = group_id
if self.__group_id is None and conf.PEER_GROUP_ID != "":
self.__group_id = conf.PEER_GROUP_ID
self.__common_service = None
self.__channel_manager: ChannelManager = None
self.__rest_service = None
self.__timer_service = TimerService()
# TODO peer 서비스의 .__score를 삭제, set chain code 테스트에서만 쓰인다. (검토후 제거할 것)
self.__score = None
self.__peer_target = None
self.__inner_target = None
self.__peer_port = 0
# For Send tx to leader
self.__tx_process = None
if conf.ENABLE_KMS:
rand_table = self.__get_random_table()
self.__auth = PeerAuthorization(rand_table=rand_table)
else:
self.__auth = PeerAuthorization(public_path, private_path,
cert_pass)
# gRPC service for Peer
self.__inner_service = InnerService()
self.__outer_service = OuterService()
self.__reset_voter_in_progress = False
@property
def common_service(self):
return self.__common_service
@property
def timer_service(self):
return self.__timer_service
@property
def channel_manager(self):
return self.__channel_manager
@property
def send_to_process_thread(self):
return self.__send_to_process_thread
@property
def tx_process(self):
return self.__tx_process
@property
def peer_target(self):
return self.__peer_target
@property
def auth(self):
return self.__auth
@property
def stub_to_radiostation(self) -> StubManager:
if self.__stub_to_radio_station is None:
self.__stub_to_radio_station = StubManager.get_stub_manager_to_server(
self.__radio_station_target,
loopchain_pb2_grpc.RadioStationStub,
conf.CONNECTION_RETRY_TIMEOUT_TO_RS)
return self.__stub_to_radio_station
@property
def peer_id(self):
return self.__peer_id
@property
def group_id(self):
if self.__group_id is None:
self.__group_id = self.__peer_id
return self.__group_id
@property
def peer_target(self):
return self.__peer_target
def __get_random_table(self) -> list:
"""request get rand_table to rs
:return: rand_table from rs
"""
try:
response = self.stub_to_radiostation.call_in_time(
"GetRandomTable", loopchain_pb2.CommonRequest(request=""))
if response.response_code == message_code.Response.success:
random_table = json.loads(response.message)
else:
util.exit_and_msg(f"get random table fail \n"
f"cause by {response.message}")
return random_table
except Exception as e:
util.exit_and_msg(f"get random table and init peer_auth fail \n"
f"cause by : {e}")
def rotate_next_leader(self, channel_name):
"""Find Next Leader Id from peer_list and reset leader to that peer"""
# logging.debug("rotate next leader...")
util.logger.spam(f"peer_service:rotate_next_leader")
peer_manager = self.__channel_manager.get_peer_manager(channel_name)
next_leader = peer_manager.get_next_leader_peer(is_only_alive=True)
# Check Next Leader is available...
if next_leader is not None and next_leader.peer_id != self.peer_id:
try:
stub_manager = peer_manager.get_peer_stub_manager(next_leader)
response = stub_manager.call(
"GetStatus",
loopchain_pb2.StatusRequest(request="get_leader_peer"),
is_stub_reuse=True)
# Peer 가 leader 로 변경되는데 시간이 필요함으로 접속 여부만 확인한다.
# peer_status = json.loads(response.status)
# if peer_status["peer_type"] != str(loopchain_pb2.BLOCK_GENERATOR):
# logging.warning("next rotate is not a leader")
# raise Exception
except Exception as e:
logging.warning(f"rotate next leader exceptions({e})")
next_leader = peer_manager.leader_complain_to_rs(
conf.ALL_GROUP_ID)
if next_leader is not None:
self.reset_leader(next_leader.peer_id, channel_name)
else:
util.logger.warning(
f"peer_service:rotate_next_leader next_leader is None({next_leader})"
)
def reset_leader(self, new_leader_id, channel: str):
logging.info(
f"RESET LEADER channel({channel}) leader_id({new_leader_id})")
block_manager = self.__channel_manager.get_block_manager(channel)
peer_manager = self.__channel_manager.get_peer_manager(channel)
complained_leader = peer_manager.get_leader_peer()
leader_peer = peer_manager.get_peer(new_leader_id, None)
if leader_peer is None:
logging.warning(
f"in peer_service:reset_leader There is no peer by peer_id({new_leader_id})"
)
return
util.logger.spam(
f"peer_service:reset_leader target({leader_peer.target})")
peer_manager.set_leader_peer(leader_peer, None)
self_peer_object = peer_manager.get_peer(self.__peer_id)
peer_leader = peer_manager.get_leader_peer()
peer_type = loopchain_pb2.PEER
if self_peer_object.target == peer_leader.target:
util.change_log_color_set(True)
logging.debug("Set Peer Type Leader!")
peer_type = loopchain_pb2.BLOCK_GENERATOR
block_manager.get_blockchain().reset_made_block_count()
# TODO 아래 코드는 중복된 의미이다. 하지만, leader 가 변경되길 기다리는 코드로 의미를 명확히 할 경우
# 블록체인 동작 지연으로 인한 오류가 발생한다. 우선 더 안정적인 테스트 결과를 보이는 상태로 유지한다.
response = peer_manager.get_peer_stub_manager(
self_peer_object).call("Request",
loopchain_pb2.Message(
code=message_code.Request.status,
channel=channel),
is_stub_reuse=True)
peer_status = json.loads(response.meta)
if peer_status['peer_type'] == str(loopchain_pb2.BLOCK_GENERATOR):
is_broadcast = True
else:
is_broadcast = False
peer_manager.announce_new_leader(complained_leader.peer_id,
new_leader_id,
is_broadcast=is_broadcast)
else:
util.change_log_color_set()
logging.debug("Set Peer Type Peer!")
# 새 leader 에게 subscribe 하기
self.__common_service.subscribe(
channel=channel,
subscribe_stub=peer_manager.get_peer_stub_manager(peer_leader),
peer_type=loopchain_pb2.BLOCK_GENERATOR)
# update candidate blocks
block_manager.get_candidate_blocks().set_last_block(
block_manager.get_blockchain().last_block)
block_manager.set_peer_type(peer_type)
if self.__tx_process is not None:
# peer_process 의 남은 job 을 처리한다. (peer->leader 인 경우),
# peer_process 를 리더 정보를 변경한다. (peer->peer 인 경우)
self.__tx_process_connect_to_leader(self.__tx_process,
peer_leader.target)
def show_peers(self, channel_name):
logging.debug(f"peer_service:show_peers ({channel_name}): ")
for peer in self.__channel_manager.get_peer_manager(
channel_name).get_IP_of_peers_in_group():
logging.debug("peer_target: " + peer)
def service_stop(self):
self.__channel_manager.stop_block_managers()
self.__common_service.stop()
def score_invoke(self, block, channel) -> dict:
block_object = pickle.dumps(block)
response = self.channel_manager.get_score_container_stub(channel).call(
method_name="Request",
message=loopchain_pb2.Message(
code=message_code.Request.score_invoke, object=block_object),
timeout=conf.SCORE_INVOKE_TIMEOUT,
is_raise=True)
# logging.debug("Score Server says: " + str(response))
if response.code == message_code.Response.success:
return json.loads(response.meta)
def __connect_to_all_channel(self) -> bool:
"""connect to radiostation with all channel
:return: is radiostation connected
"""
response = self.__get_channel_infos()
is_radiostation_connected = response is not None
if is_radiostation_connected:
logging.info(f"Connect to channels({response.channel_infos})")
channels = json.loads(response.channel_infos)
score_container_port_diff = 0
for channel in list(channels.keys()):
logging.debug(f"Try join channel({channel})")
self.__channel_manager.load_block_manager(peer_id=self.peer_id,
channel=channel)
self.__channel_manager.load_peer_manager(channel=channel)
is_score_container_loaded = self.__channel_manager.load_score_container_each(
channel_name=channel,
score_package=channels[channel]["score_package"],
container_port=self.__peer_port +
conf.PORT_DIFF_SCORE_CONTAINER + score_container_port_diff,
peer_target=self.__peer_target)
if is_score_container_loaded is False:
util.exit_and_msg(
f"peer_service:__connect_to_all_channel score container load Fail ({channel})"
)
score_container_port_diff = score_container_port_diff + conf.PORT_DIFF_BETWEEN_SCORE_CONTAINER
response = self.connect_to_radiostation(channel=channel)
if response is not None:
self.__channel_manager.save_peer_manager(
self.__channel_manager.get_peer_manager(channel),
channel)
return is_radiostation_connected
def __get_channel_infos(self):
response = self.stub_to_radiostation.call_in_times(
method_name="GetChannelInfos",
message=loopchain_pb2.GetChannelInfosRequest(
peer_id=self.__peer_id,
peer_target=self.__peer_target,
group_id=self.group_id,
cert=self.__auth.get_public_der()),
retry_times=conf.CONNECTION_RETRY_TIMES_TO_RS,
is_stub_reuse=True,
timeout=conf.CONNECTION_TIMEOUT_TO_RS)
return response
def connect_to_radiostation(
self,
channel: str,
is_reconnect: bool = False) -> loopchain_pb2.ConnectPeerReply:
"""connect to radiostation with channel
:return: 접속정보, 실패시 None
"""
logging.debug(f"try to connect to radiostation channel({channel})")
if self.stub_to_radiostation is None:
logging.warning("fail make stub to Radio Station!!")
return None
# 공통 부분
response = self.stub_to_radiostation.call_in_times(
method_name="ConnectPeer",
message=loopchain_pb2.ConnectPeerRequest(
channel=channel,
peer_object=b'',
peer_id=self.__peer_id,
peer_target=self.__peer_target,
group_id=self.group_id,
cert=self.__auth.get_public_der()),
retry_times=conf.CONNECTION_RETRY_TIMES_TO_RS,
is_stub_reuse=True,
timeout=conf.CONNECTION_TIMEOUT_TO_RS)
if not is_reconnect:
if response is not None and response.status == message_code.Response.success:
peer_list_data = pickle.loads(response.peer_list)
self.__channel_manager.get_peer_manager(channel).load(
peer_list_data, False)
logging.debug("peer list update: " +
self.__channel_manager.get_peer_manager(
channel).get_peers_for_debug())
else:
logging.debug("using local peer list: " +
self.__channel_manager.get_peer_manager(
channel).get_peers_for_debug())
return response
def add_unconfirm_block(self, block_unloaded, channel_name=None):
if channel_name is None:
channel_name = conf.LOOPCHAIN_DEFAULT_CHANNEL
block = pickle.loads(block_unloaded)
block_hash = block.block_hash
response_code, response_msg = message_code.get_response(
message_code.Response.fail_validate_block)
# block 검증
block_is_validated = False
try:
block_is_validated = Block.validate(block)
except Exception as e:
logging.error(e)
if block_is_validated:
# broadcast 를 받으면 받은 블럭을 검증한 후 검증되면 자신의 blockchain 의 unconfirmed block 으로 등록해 둔다.
confirmed, reason = \
self.__channel_manager.get_block_manager(channel_name).get_blockchain().add_unconfirm_block(block)
if confirmed:
response_code, response_msg = message_code.get_response(
message_code.Response.success_validate_block)
elif reason == "block_height":
# Announce 되는 블럭과 자신의 height 가 다르면 Block Height Sync 를 다시 시도한다.
self.__channel_manager.get_block_manager(
channel_name).block_height_sync()
return response_code, response_msg, block_hash
def __tx_process_connect_to_leader(self, peer_process, leader_target):
logging.debug("try... Peer Process connect_to_leader: " +
leader_target)
logging.debug("peer_process: " + str(peer_process))
peer_process.send_to_process(
(BroadcastProcess.CONNECT_TO_LEADER_COMMAND, leader_target))
peer_process.send_to_process(
(BroadcastProcess.SUBSCRIBE_COMMAND, leader_target))
def __run_tx_process(self, inner_channel_info):
tx_process = BroadcastProcess("Tx Process")
tx_process.start()
tx_process.send_to_process(("status", ""))
wait_times = 0
wait_for_process_start = None
# TODO process wait loop 를 살리고 시간을 조정하였음, 이 상태에서 tx process 가 AWS infra 에서 시작되는지 확인 필요.
# time.sleep(conf.WAIT_SECONDS_FOR_SUB_PROCESS_START)
while wait_for_process_start is None:
time.sleep(conf.SLEEP_SECONDS_FOR_SUB_PROCESS_START)
logging.debug(f"wait start tx process....")
wait_for_process_start = tx_process.get_receive("status")
if wait_for_process_start is None and wait_times > conf.WAIT_SUB_PROCESS_RETRY_TIMES:
util.exit_and_msg("Tx Process start Fail!")
logging.debug(f"Tx Process start({wait_for_process_start})")
tx_process.send_to_process(
(BroadcastProcess.MAKE_SELF_PEER_CONNECTION_COMMAND,
inner_channel_info))
return tx_process
def __stop_tx_process(self):
if self.__tx_process is not None:
self.__tx_process.stop()
self.__tx_process.wait()
def reset_voter_count(self):
"""peer_list 의 활성화 상태(gRPC 응답)을 갱신하여 voter 수를 변경한다.
:return:
"""
# if self.__reset_voter_in_progress is not True:
# self.__reset_voter_in_progress = True
# logging.debug("reset voter count before: " +
# str(ObjectManager().peer_service.peer_manager.get_peer_count()))
#
# # TODO peer_list 를 순회하면서 gRPC 오류인 사용자를 remove_audience 한다.
# self.__channel_manager.get_peer_manager(
# conf.LOOPCHAIN_DEFAULT_CHANNEL).reset_peers(None, self.__common_service.remove_audience)
# logging.debug("reset voter count after: " +
# str(ObjectManager().peer_service.peer_manager.get_peer_count()))
# self.__reset_voter_in_progress = False
pass
def set_chain_code(self, score):
"""Score를 패스로 전달하지 않고 (serve(...)의 score 는 score 의 파일 Path 이다.)
Object 를 직접 할당하기 위한 인터페이스로 serve 호출전에 지정되어야 한다.
:param score: score Object
"""
# TODO 현재는 테스트를 위해서만 사용되고 있다. 검토후 제거 할 것
self.__score = score
# TODO 아래 세줄은 삭제 가능할 듯 검토 후 다음 merge 때 삭제 부탁합니다. assign to @godong
self.__score_info = dict()
self.__score_info[
message_code.MetaParams.ScoreInfo.score_id] = self.__score.id()
self.__score_info[message_code.MetaParams.ScoreInfo.
score_version] = self.__score.version()
def __port_init(self, port):
# service 초기화 작업
self.__peer_target = util.get_private_ip() + ":" + str(port)
self.__inner_target = conf.IP_LOCAL + ":" + str(port)
self.__peer_port = int(port)
# SCORE Service check Using Port
# check Port Using
if util.check_port_using(conf.IP_PEER,
int(port) + conf.PORT_DIFF_SCORE_CONTAINER):
util.exit_and_msg('Score Service Port is Using ' +
str(int(port) + conf.PORT_DIFF_SCORE_CONTAINER))
def __run_inner_services(self, port):
if conf.ENABLE_REST_SERVICE:
if conf.USE_GUNICORN_HA_SERVER:
# Run web app on gunicorn in another process.
new_rest_port = int(
port) + conf.PORT_DIFF_REST_SERVICE_CONTAINER
logging.debug(
f'Launch gunicorn proxy server. Port = {new_rest_port}')
subprocess.Popen(
['python3', './rest_proxy.py', '-p',
str(port), '&'])
else:
# Run web app as it is.
logging.debug(f'Launch Flask RESTful server. Port = {port}')
self.__rest_service = RestService(int(port))
def __make_peer_id(self):
"""네트워크에서 Peer 를 식별하기 위한 UUID를 level db 에 생성한다.
"""
try:
uuid_bytes = bytes(
self.__level_db.Get(conf.LEVEL_DB_KEY_FOR_PEER_ID))
peer_id = uuid.UUID(bytes=uuid_bytes)
except KeyError: # It's first Run
peer_id = None
if peer_id is None:
peer_id = uuid.uuid1()
logging.info("make new peer_id: " + str(peer_id))
self.__level_db.Put(conf.LEVEL_DB_KEY_FOR_PEER_ID, peer_id.bytes)
self.__peer_id = str(peer_id)
def timer_test_callback_function(self, message):
logging.debug(f'timer test callback function :: ({message})')
def __block_height_sync_channel(self, channel_name):
# leader 로 시작하지 않았는데 자신의 정보가 leader Peer 정보이면 block height sync 하여
# 최종 블럭의 leader 를 찾는다.
block_sync_target_stub = None
peer_manager = self.__channel_manager.get_peer_manager(channel_name)
peer_leader = peer_manager.get_leader_peer()
self_peer_object = peer_manager.get_peer(self.__peer_id)
is_delay_announce_new_leader = False
peer_old_leader = None
if peer_leader.target != self.__peer_target:
block_sync_target_stub = StubManager.get_stub_manager_to_server(
peer_leader.target,
loopchain_pb2_grpc.PeerServiceStub,
time_out_seconds=conf.CONNECTION_RETRY_TIMEOUT)
if block_sync_target_stub is None:
logging.warning(
"You maybe Older from this network... or No leader in this network!"
)
# TODO 이 상황에서 rs 에 leader complain 을 진행한다
is_delay_announce_new_leader = True
peer_old_leader = peer_leader
peer_leader = self.__channel_manager.get_peer_manager(
channel_name).leader_complain_to_rs(
conf.ALL_GROUP_ID, is_announce_new_peer=False)
if peer_leader is not None:
block_sync_target_stub = StubManager.get_stub_manager_to_server(
peer_leader.target,
loopchain_pb2_grpc.PeerServiceStub,
time_out_seconds=conf.CONNECTION_RETRY_TIMEOUT)
if peer_leader is None or peer_leader.peer_id == self.__peer_id:
peer_leader = self_peer_object
self.__channel_manager.get_block_manager(
channel_name).set_peer_type(loopchain_pb2.BLOCK_GENERATOR)
else:
self.__channel_manager.get_block_manager(
channel_name).block_height_sync(block_sync_target_stub)
# # TODO 마지막 블럭으로 leader 정보를 판단하는 로직은 리더 컴플레인 알고리즘 수정 후 유효성을 다시 판단할 것
# last_block_peer_id = self.__channel_manager.get_block_manager().get_blockchain().last_block.peer_id
#
# if last_block_peer_id != "" and last_block_peer_id != self.__peer_list.get_leader_peer().peer_id:
# logging.debug("make leader stub after block height sync...")
# new_leader_peer = self.__peer_list.get_peer(last_block_peer_id)
#
# if new_leader_peer is None:
# new_leader_peer = self.__peer_list.leader_complain_to_rs(conf.ALL_GROUP_ID)
#
# self.__peer_list.set_leader_peer(new_leader_peer, None)
# # TODO 리더가 상단의 next_leader_pear 와 같을 경우 stub 을 재설정하게 되는데 문제 없는지 확인 할 것
# peer_leader = new_leader_peer
# else:
if block_sync_target_stub is None:
util.exit_and_msg("Fail connect to leader!!")
self.show_peers(channel_name)
if block_sync_target_stub is not None:
self.__common_service.subscribe(channel_name,
block_sync_target_stub,
loopchain_pb2.BLOCK_GENERATOR)
if is_delay_announce_new_leader:
self.__channel_manager.get_peer_manager(
channel_name).announce_new_leader(peer_old_leader.peer_id,
peer_leader.peer_id)
def __start_base_services(self, score):
"""start base services >> common_service, channel_manager, tx_process
:param score:
:return:
"""
inner_service_port = conf.PORT_INNER_SERVICE or (
self.__peer_port + conf.PORT_DIFF_INNER_SERVICE)
self.__common_service = CommonService(loopchain_pb2,
inner_service_port)
self.__channel_manager = ChannelManager(
common_service=self.__common_service,
level_db_identity=self.__peer_target)
self.__tx_process = self.__run_tx_process(
inner_channel_info=conf.IP_LOCAL + ":" + str(inner_service_port))
def serve(self, port, score=None):
"""start func of Peer Service ===================================================================
:param port:
:param score:
"""
if score is None:
score = conf.DEFAULT_SCORE_PACKAGE
stopwatch_start = timeit.default_timer()
peer_type = loopchain_pb2.PEER
is_all_service_safe_start = True
self.__port_init(port)
self.__level_db, self.__level_db_path = util.init_level_db(
self.__peer_target)
self.__make_peer_id()
self.__run_inner_services(port)
self.__start_base_services(score=score)
is_radiostation_connected = self.__connect_to_all_channel()
if is_radiostation_connected is False:
util.exit_and_msg(
"There is no peer_list, initial network is not allowed without RS!"
)
# start timer service.
if conf.CONSENSUS_ALGORITHM == conf.ConsensusAlgorithm.lft:
self.__timer_service.start()
# TODO LOOPCHAIN-61 인증서 로드
_cert = None
# TODO LOOPCHAIN-61 인증서 키로드
_private_key = None
# TODO 인증정보 요청
for channel in self.__channel_manager.get_channel_list():
peer_leader = self.__channel_manager.get_peer_manager(
channel).get_leader_peer(is_complain_to_rs=True)
logging.debug(f"channel({channel}) peer_leader: " +
str(peer_leader))
# TODO 이 부분을 조건 검사가 아니라 leader complain 을 이용해서 리더가 되도록 하는 방법 검토하기
# 자기가 peer_list 의 유일한 connected PEER 이거나 rs 의 leader 정보와 같을 때 block generator 가 된다.
if self.__peer_id == peer_leader.peer_id:
if is_radiostation_connected is True or self.__channel_manager.get_peer_manager(
channel).get_connected_peer_count(None) == 1:
util.change_log_color_set(True)
logging.debug(f"Set Peer Type Leader! channel({channel})")
peer_type = loopchain_pb2.BLOCK_GENERATOR
# load score 는 score 서비스가 시작된 이후 block height sync 가 시작되기전에 이루어져야 한다.
# is_all_service_safe_start &= self.__load_score(score)
if peer_type == loopchain_pb2.BLOCK_GENERATOR:
self.__channel_manager.get_block_manager(
channel).set_peer_type(peer_type)
elif peer_type == loopchain_pb2.PEER:
self.__block_height_sync_channel(channel)
if conf.CONSENSUS_ALGORITHM == conf.ConsensusAlgorithm.lft:
self.__common_service.update_audience(
self.channel_manager.get_peer_manager().dump())
loopchain_pb2_grpc.add_PeerServiceServicer_to_server(
self.__outer_service, self.__common_service.outer_server)
loopchain_pb2_grpc.add_InnerServiceServicer_to_server(
self.__inner_service, self.__common_service.inner_server)
logging.info("Start peer service at port: " + str(port))
self.__channel_manager.start_block_managers()
self.__common_service.start(port, self.__peer_id, self.__group_id)
if self.stub_to_radiostation is not None:
for channel in self.__channel_manager.get_channel_list():
self.__common_service.subscribe(
channel=channel, subscribe_stub=self.stub_to_radiostation)
for channel in self.__channel_manager.get_channel_list():
channel_leader = self.__channel_manager.get_peer_manager(
channel).get_leader_peer()
if channel_leader is not None:
util.logger.spam(
f"connnect to channel({channel}) leader({channel_leader.target})"
)
self.__tx_process_connect_to_leader(self.__tx_process,
channel_leader.target)
self.__send_to_process_thread.set_process(self.__tx_process)
self.__send_to_process_thread.start()
stopwatch_duration = timeit.default_timer() - stopwatch_start
logging.info(
f"Start Peer Service start duration({stopwatch_duration})")
# service 종료를 기다린다.
if is_all_service_safe_start:
self.__common_service.wait()
else:
self.service_stop()
self.__send_to_process_thread.stop()
self.__send_to_process_thread.wait()
if self.__timer_service.is_run():
self.__timer_service.stop()
self.__timer_service.wait()
logging.info("Peer Service Ended.")
self.__channel_manager.stop_score_containers()
if self.__rest_service is not None:
self.__rest_service.stop()
self.__stop_tx_process()