class Streamer:
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
def send(self, data_bytes: bytes) -> None:
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
# for now I'm just sending the raw application-level data in one UDP payload
self.socket.sendto(data_bytes, (self.dst_ip, self.dst_port))
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
# this sample code just calls the recvfrom method on the LossySocket
data, addr = self.socket.recvfrom()
# For now, I'll just pass the full UDP payload to the app
return data
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
# your code goes here, especially after you add ACKs and retransmissions.
pass
class Streamer:
def __init__(self, dst_ip, dst_port,
src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
def send(self, data_bytes: bytes):
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
# for now I'm just sending the raw application-level data in one UDP payload
i=0
j=len(data_bytes)
if(j>1472):
while((j-i)>1472):
self.socket.sendto(data_bytes[i:i+1472], (self.dst_ip, self.dst_port))
i=i+1472
self.socket.sendto(data_bytes[i:j], (self.dst_ip, self.dst_port))
else:
self.socket.sendto(data_bytes, (self.dst_ip, self.dst_port))
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
# this sample code just calls the recvfrom method on the LossySocket
data, addr = self.socket.recvfrom()
# For now, I'll just pass the full UDP payload to the app
return data
class Streamer:
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.recvBuff = {}
self.seqNum = 0
self.recNum = 0
def send(self, data_bytes: bytes):
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
# for now I'm just sending the raw application-level data in one UDP payload
i = 0
j = len(data_bytes)
seq = (str(self.seqNum) + ' ').encode()
if ((j + len(seq)) > 1472):
while ((j - i - len(seq)) > 1472):
self.socket.sendto(seq + data_bytes[i:i + 1472 - len(seq)],
(self.dst_ip, self.dst_port))
i = i + 1472 - len(seq)
self.seqNum = 1 + self.seqNum
seq = (str(self.seqNum) + ' ').encode()
self.socket.sendto(seq + data_bytes[i:j],
(self.dst_ip, self.dst_port))
else:
self.socket.sendto(seq + data_bytes, (self.dst_ip, self.dst_port))
self.seqNum += 1
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
# this sample code just calls the recvfrom method on the LossySocket
while (True):
data, addr = self.socket.recvfrom()
output = ''.encode()
d = data.decode().split(' ', 1)
if d[0] == str(self.recNum):
output = d[1].encode()
self.recNum = self.recNum + 1
while (self.recNum in self.recvBuff):
output += self.recvBuff[self.recNum]
self.recNum += 1
return output
else:
self.recvBuff[self.recNum] = d[1].encode()
class Streamer:
send_sequence_number = 0
receive_sequence_number = 0
receive_buffer = {}
send_buffer = {}
self_half_closed = False
remote_closed = False
closed = False
executor = None
recv_thread = None
send_thread = None
last_fin_ack_sent = None
chunk_size = 1446
time_out_seconds = 0.25
fin_grace_period = 2
default_wait_seconds = 0.001
alpha = 0.1
beta = 0.1
DevRTT = 0.01
EstimatedRTT = 0.15
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.executor = ThreadPoolExecutor(max_workers=2)
self.recv_thread = self.executor.submit(self.recv_async)
self.send_thread = self.executor.submit(self.send_async)
def send(self, data_bytes: bytes) -> None:
"""Note that data_bytes can be larger than one packet."""
chunk_index = 0
while chunk_index * self.chunk_size < len(data_bytes):
chunk_start_index = chunk_index * self.chunk_size
chunk_end_index = min(len(data_bytes),
(chunk_index + 1) * self.chunk_size)
packet = TCPPacket(
sequence_number=self.send_sequence_number,
data_bytes=data_bytes[chunk_start_index:chunk_end_index])
self.send_buffer[self.send_sequence_number] = (packet, 0)
self.send_sequence_number += 1
chunk_index += 1
def send_ack(self, acknowledgement_number: int):
packet = TCPPacket(sequence_number=acknowledgement_number, ack=True)
self.socket.sendto(packet.pack(), (self.dst_ip, self.dst_port))
def send_fin(self, sequence_number: int):
packet = TCPPacket(fin=True, sequence_number=sequence_number)
self.send_buffer[packet.sequence_number] = (packet, time.time())
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
while self.receive_sequence_number not in self.receive_buffer:
time.sleep(self.default_wait_seconds)
# curr = self.receive_buffer.pop(0)
curr = self.receive_buffer[self.receive_sequence_number]
del self.receive_buffer[self.receive_sequence_number]
self.receive_sequence_number += 1
return curr.data_bytes
def send_async(self):
while not self.self_half_closed:
try:
copy_send_buffer = self.send_buffer.copy()
for val in copy_send_buffer:
if isinstance(copy_send_buffer[val], tuple):
packet, time_sent = copy_send_buffer[val]
if time_sent is not None:
if time.time() - time_sent > self.time_out_seconds:
self.socket.sendto(
packet.pack(),
(self.dst_ip, self.dst_port))
self.send_buffer[packet.sequence_number] = (
packet, time.time())
else:
del self.send_buffer[packet.sequence_number]
pass
except Exception as ex:
pass
# print("Sender died")
# traceback.print_exc(file=sys.stdout)
time.sleep(self.default_wait_seconds)
return True
def recv_async(self):
while not self.closed:
try:
data, addr = self.socket.recvfrom()
if data is not None and data != b'':
packet = TCPPacket()
packet.unpack(data)
calculated_checksum = packet.get_checksum(data[16:])
if calculated_checksum == packet.checksum:
if packet.ack:
ack_packet = TCPPacket(
sequence_number=packet.sequence_number)
if packet.sequence_number % 20 == 0 and packet.sequence_number in self.send_buffer and \
self.send_buffer[packet.sequence_number][
1] is not None:
self.calculate_new_timeout(
time.time() -
self.send_buffer[packet.sequence_number][1]
)
self.send_buffer[packet.sequence_number] = (
ack_packet, None)
elif packet.fin:
# print("FIN RECEIVED", time.time())
self.send_ack(
acknowledgement_number=packet.sequence_number)
self.last_fin_ack_sent = time.time()
# if not self.self_half_closed:
# # print("REMOTE CLOSED")
# self.remote_closed = True
else:
self.send_ack(
acknowledgement_number=packet.sequence_number)
if packet.sequence_number not in self.receive_buffer:
self.receive_buffer[
packet.sequence_number] = packet
except Exception as e:
pass
# print(e)
# self.remote_closed = True
return True
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
while len(self.send_buffer) > 0:
# print(self.send_buffer)
time.sleep(self.default_wait_seconds)
# print("SENDING FIN")
self.send_fin(sequence_number=self.send_sequence_number)
self.send_sequence_number += 1
while len(self.send_buffer) > 0:
time.sleep(self.default_wait_seconds)
# print("FIN ACCEPTED", self.remote_closed)
self.self_half_closed = True
while not self.remote_closed:
if self.last_fin_ack_sent is not None:
if time.time(
) - self.last_fin_ack_sent > self.fin_grace_period:
# print("FIN COMPLETE")
self.remote_closed = True
else:
time.sleep(self.default_wait_seconds)
self.closed = True
self.socket.stoprecv()
while not self.send_thread.done():
self.send_thread.cancel()
time.sleep(self.default_wait_seconds)
while not self.recv_thread.done():
self.recv_thread.cancel()
time.sleep(self.default_wait_seconds)
self.executor.shutdown()
# your code goes here, especially after you add ACKs and retransmissions.
pass
def calculate_new_timeout(self, sample_rtt: float):
self.EstimatedRTT = (
1 - self.alpha) * self.EstimatedRTT + self.alpha * sample_rtt
self.DevRTT = (1 - self.beta) * self.DevRTT + self.beta * abs(
sample_rtt - self.EstimatedRTT)
self.time_out_seconds = self.EstimatedRTT + self.DevRTT * 4
class Streamer:
global WINDOW_SIZE
global DATS_B4_ACK
global MS_FOR_SENDER
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.current_seq = 0 # The current packetnum to be sent and to be expected
self.last_ACK = -1 # The last packetnum that was acked
self.sender_index = 0 # For labeling the packets to be sent
self.data_to_send = {} # Buffer to send items
self.buffer = {} # Buffer for recieved items
self.listening = True
self.FIN = False
self.FINACK = False
self.sending = False
self.receiving = False
self.wait_to_send = 0
self.last_sent = 0
self.send_window = 0
self.timing = True
executor = futures.ThreadPoolExecutor(max_workers=2)
executor.submit(self.listen)
executor.submit(self.sender)
def send(self, data_bytes: bytes) -> None:
while self.receiving:
sleep(0.01)
self.sending = True
header_length = 50
max_packet_length = 1472
data_length = max_packet_length - header_length
for data in self.break_string(data_bytes, data_length):
sleep(0.05)
h = hashlib.md5()
packet = (' DAT ' + str(self.current_seq) + '~').encode() + data
h.update(packet)
packet = h.hexdigest().encode() + packet
#print("Sent: %s at %s" % (packet, self.millis()))
self.data_to_send[self.current_seq] = packet
self.socket.sendto(packet, (self.dst_ip, self.dst_port))
self.send_window += 1
if self.send_window > WINDOW_SIZE:
self.last_sent = self.current_seq - WINDOW_SIZE
while self.send_window > WINDOW_SIZE:
self.send_window = self.current_seq - self.last_ACK
self.current_seq += 1
self.sending = False
def sender(self) -> None:
ms = 0
while self.timing:
if self.last_sent > self.last_ACK:
sleep(0.01)
ms += 1
if ms >= MS_FOR_SENDER:
self.resend(self.last_sent)
ms = 0
elif self.last_sent <= self.last_ACK:
self.last_sent = self.last_ACK + 1
if self.FINACK:
break
def resend(self, packet_num: int) -> None:
try:
packet = self.data_to_send[packet_num]
except Exception as e:
pass
else:
#print("Resent: %s at %s" % (packet, self.millis()))
self.socket.sendto(packet, (self.dst_ip, self.dst_port))
def send_ACK(self, number: int) -> None:
h = hashlib.md5()
acknowledgement = (' ACK ' + str(number) + '~').encode()
h.update(acknowledgement)
acknowledgement = h.hexdigest().encode() + acknowledgement
#print("Sent: %s at %s" % (acknowledgement, self.millis()))
self.socket.sendto(acknowledgement, (self.dst_ip, self.dst_port))
def send_FIN(self) -> None:
h = hashlib.md5()
finish = (' FIN ' + str(self.current_seq) + '~').encode()
h.update(finish)
finish = h.hexdigest().encode() + finish
#print("Sent: %s at %s" % (finish, self.millis()))
self.socket.sendto(finish, (self.dst_ip, self.dst_port))
def send_FINACK(self) -> None:
h = hashlib.md5()
finishack = (' FINACK ' + str(self.current_seq) + '~').encode()
h.update(finishack)
finishack = h.hexdigest().encode() + finishack
#print("Sent: %s at %s" % (finishack, self.millis()))
self.socket.sendto(finishack, (self.dst_ip, self.dst_port))
def recv(self) -> bytes:
while self.sending:
sleep(0.01)
self.receiving = True
while True:
if self.current_seq in self.buffer:
data = self.buffer.pop(self.current_seq)
self.last_ACK = self.current_seq - 1
self.current_seq += 1
break
#print("Retrieved: %s at %s" % (data, self.millis()))
self.receiving = False
return data
def listen(self) -> None:
while self.listening:
try:
totpacket, addr = self.socket.recvfrom()
except Exception as e:
print("Listener died: " + str(e))
else:
#print("Got: %s at %s" % (totpacket, self.millis()))
h = hashlib.md5()
hash, packet = totpacket.split(b' ', 1)
h.update(b' ' + packet)
broke = False
try:
if hash.decode() != h.hexdigest():
broke = True
except Exception as e:
continue
else:
if not broke:
header, data = packet.split(b'~')
packet_type, seq_num = header.split(b' ')
seq_num = int(seq_num)
if packet_type == b'DAT':
self.wait_to_send += 1
if seq_num == self.last_ACK + 1:
self.buffer[seq_num] = data
self.last_ACK += 1
elif seq_num > self.last_ACK + 1:
self.buffer[seq_num] = data
if self.wait_to_send >= DATS_B4_ACK:
self.send_ACK(self.last_ACK)
self.wait_to_send = 0
elif packet_type == b'ACK':
if seq_num > self.last_ACK:
self.last_ACK = seq_num
else:
pass
elif packet_type == b'FIN':
self.FIN = True
elif packet_type == b'FINACK':
self.FIN = True
self.FINACK = True
def stop_listening(self) -> None:
self.listening = False
self.socket.stoprecv()
def close(self) -> None:
while self.sending or self.receiving:
sleep(0.01)
self.send_FIN()
miliseconds = 0
while not self.FIN:
if (miliseconds % 50) == 49:
self.send_FIN()
sleep(0.01)
miliseconds += 1
self.send_FINACK()
miliseconds = 0
while not self.FINACK:
if (miliseconds % 50) == 49:
self.send_FINACK()
if miliseconds >= 250:
break
sleep(0.01)
miliseconds += 1
self.timing = False
sleep(1)
self.stop_listening()
self.data_to_send = {} # Buffer to send items
self.buffer = {} # Buffer for recieved items
self.listening = True
self.FIN = False
self.FINACK = False
self.sending = False
self.receiving = False
self.current_seq = -1 # The current packetnum to be sent and to be expected
self.last_ACK = -1 # The last packetnum that was acked
self.sender_index = 0 # For labeling the packets to be sent
def parse_packet(self, packet: bytes) -> None:
pass
def checksum(self, string: bytes) -> str:
pass
def wait_for_ACK(self, packet_num: int) -> None:
miliseconds = 0
timeout = 25
while (self.last_ACK < self.current_seq and miliseconds < timeout):
sleep(0.01)
miliseconds += 1
if miliseconds >= timeout:
self.resend(packet_num)
def break_string(self, string: bytes, length: int) -> list:
return (string[0 + i:length + i]
for i in range(0, len(string), length))
def millis(self):
return int(round(time.time() * 1000))
class Streamer:
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.seq = 0
self.buffer = dict()
self.prev_recv = -1
self.closed = False
self.ack = False
executor = ThreadPoolExecutor(max_workers=1)
executor.submit(self.listener)
def hasher(self, incoming: bytes) -> bytes:
h = hashlib.md5(incoming).digest()
return h
def send_helper(self, data_bytes: bytes, retransmit):
length = len(data_bytes)
#i'm changing the packet structure to fit the hash [16 byte s for storing hash]
max_packet = int(1400 - calcsize('ic16s'))
if length <= max_packet:
#print(calcsize('sic16s'))
#print('send size', len(pack(str(length) + 'sic16s', data_bytes, self.seq, b'd', self.hasher(data_bytes))))
self.socket.sendto(
pack(
str(length) + 'sic16s', data_bytes, self.seq, b'd',
self.hasher(
pack(str(length) + 'sic', data_bytes, self.seq,
b'd'))), (self.dst_ip, self.dst_port))
if not retransmit:
self.wait_ack(data_bytes)
# self.seq = self.seq + 1
else:
chunk = max_packet
while chunk < length:
# print('send size', len(pack(str(max_packet) + 'sic', data_bytes[chunk - max_packet:chunk], self.seq, b'd')))
self.socket.sendto(
pack(
str(max_packet) + 'sic16s',
data_bytes[chunk - max_packet:chunk], self.seq, b'd',
self.hasher(
pack(
str(max_packet) + 'sic',
data_bytes[chunk - max_packet:chunk], self.seq,
b'd'))), (self.dst_ip, self.dst_port))
if not retransmit:
self.wait_ack(data_bytes[chunk - max_packet:chunk])
# self.seq = self.seq + 1
chunk = chunk + max_packet
# print('send size', len(pack(str(max_packet) + 'sic', data_bytes[chunk - max_packet:], self.seq, b'd')))
self.socket.sendto(
pack(
str(max_packet) + 'sic16s',
data_bytes[chunk - max_packet:], self.seq, b'd',
self.hasher(
pack(
str(max_packet) + 'sic',
data_bytes[chunk - max_packet:], self.seq, b'd'))),
(self.dst_ip, self.dst_port))
if not retransmit:
self.wait_ack(data_bytes[chunk - max_packet:])
# self.seq = self.seq + 1
def wait_ack(self, data_bytes: bytes):
while not self.ack:
time.sleep(0.25)
print(self.ack)
if not self.ack:
self.send_helper(data_bytes, True)
print("sending {} again bc dropped".format(data_bytes))
continue
else:
self.seq = self.seq + 1
break
self.ack = False
def send(self, data_bytes: bytes) -> None:
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
self.send_helper(data_bytes, False)
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
# this sample code just calls the recvfrom method on the LossySocket
while not str(self.prev_recv + 1) in self.buffer:
print("Looking for", self.prev_recv + 1)
time.sleep(0.1)
continue
print('found it in here', self.buffer)
self.prev_recv = self.prev_recv + 1
return self.buffer.pop(str(self.prev_recv))
def listener(self):
while not self.closed: # a later hint will explain self.closed
try:
data, addr = self.socket.recvfrom()
if len(data) == 0:
continue
# store the data in the receive buffer #len(data) - 5 --> - (5+16)
print('received',
unpack(str(len(data) - 21) + 'sic16s', data)[0:3])
data_bytes, seq_num, packet_type, data_hash = unpack(
str(len(data) - 21) + 'sic16s', data)
#check corrupted data
ref_hash = self.hasher(
pack(
str(len(data) - 21) + 'sic', data_bytes, seq_num,
packet_type))
if ref_hash != data_hash:
#corrupted packet is dropped here
continue
elif str(packet_type)[2] == 'a':
self.ack = True
elif str(packet_type)[2] == 'd':
self.socket.sendto(
pack(
'2sic16s', b'aa', self.prev_recv, b'a',
self.hasher(
pack('2sic', b'aa', self.prev_recv, b'a'))),
(self.dst_ip, self.dst_port))
data_bytes = bytes(
data_bytes.decode('utf-8').rstrip('\0x00'),
encoding='utf-8')
self.buffer[str(seq_num)] = data_bytes
else:
self.socket.sendto(
pack(
'2sic16s', b'aa', self.prev_recv, b'a',
self.hasher(
pack('2sic', b'aa', self.prev_recv, b'a'))),
(self.dst_ip, self.dst_port))
print('new buffer', self.buffer)
except Exception as e:
print("listener died!")
print(e)
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
# your code goes here, especially after you add ACKs and retransmissions.
self.ack = False
while not self.ack:
self.socket.sendto(
pack('2sic16s', b'ff', self.seq, b'f',
self.hasher(pack('2sic', b'ff', self.seq, b'f'))),
(self.dst_ip, self.dst_port))
time.sleep(0.25)
time.sleep(2)
self.closed = True
self.socket.stoprecv()
return
class Streamer:
def __init__(self, dst_ip, dst_port,
src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.segmentSize = 1472 # maximum size of a udp body
self.headerSize = 16 # seq 4 bytes, ack 4 bytes, checksum 8 bytes
self.watchDogTimeout = 10 # if not hearing from anything from remote after 10 seconds when the connection is not closed, watch dog will shut down the connection
self.closeWaitTimeout = 3 # if no progress is made in recent 3 seconds, after user has called .close(), assume remote has exited
self.seek = 0 # upper-level application has read until
self.pushBuffer = {} # out-bound buffer. key is sequence number, value is body bytes
self.pushLocalSeek = 0 # I have written until
self.pushRemoteSeek = 0 # remote has read until
self.pullBuffer = {} # in-bound buffer. key is sequence number, value is body bytes
self.pullLocalSeek = 0 # I have read until
self.pullRemoteSeek = 0 # remote has written until
self.maxInFlightSegmentCount = 8 # out-bound worker sends data packets as many as
self.lastEchoTimeStamp = float("inf") # last time stamp when hearing from remote side, even if corrupted. It proves that remote side is alive
self.lock = threading.Lock() # lock on push buffer, push local seek, push remote seek, pull buffer, pull local seek, pull remote seek
self.closed = False # if closed, workers stop while-loop
self.executor = concurrent.futures.ThreadPoolExecutor()
self.outBoundJob = self.executor.submit(self.outBoundWorker) # out-bound worker is only in charge of sending packets
self.inBoundJob = self.executor.submit(self.inBoundWorker) # in-bound worker is only in charge of receiving packets and updating seeks
self.watchDogJob = self.executor.submit(self.watchDogWorker) # watch dog worker closes the connection after not hearing from remote side for too long
def send(self, data_bytes: bytes) -> None: # application wants to send something
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
# for now I'm just sending the raw application-level data in one UDP payload
bodySize = self.segmentSize - self.headerSize
for i in range(0, len(data_bytes), bodySize): # cut data into chunks of maximum body size
body = data_bytes[i: i + bodySize]
with self.lock:
self.pushBuffer[self.pushLocalSeek] = body # do nothing but put the data in the send buffer
self.pushLocalSeek += len(body) # update push buffer's local seek pointer further
def outBoundWorker(self) -> None: # out-bound worker is in charge of sending data in push buffer, re-transmitting and sending heart beat packet when there are no data in push buffer
while not self.closed:
time.sleep(0.25) # every some time you should send something. If there is data, send data. If there is no data, send a heart beat
with self.lock:
if self.pushRemoteSeek < self.pushLocalSeek: # receiver did not acknowledged every segments we sent
for k in sorted(self.pushBuffer.keys()): # clear segments acknowledged by remote
v = self.pushBuffer[k]
if k + len(v) <= self.pushRemoteSeek:
self.pushBuffer.pop(k)
# aggregate small packets into large packets
data = bytearray()
for k in sorted(self.pushBuffer.keys()):
v = self.pushBuffer[k]
data.extend(v)
self.pushBuffer.clear()
for i in range(0, len(data), self.segmentSize - self.headerSize):
chunk = data[i: i + self.segmentSize - self.headerSize]
self.pushBuffer[i + self.pushRemoteSeek] = bytes(chunk)
for k in sorted(self.pushBuffer.keys())[: self.maxInFlightSegmentCount]:
v = self.pushBuffer[k]
self.sendSegment(k, self.pullLocalSeek, v)
else: # no data in push buffer
self.sendAck(self.pushLocalSeek, self.pullLocalSeek) # send a heart beat then to let remote know we are alive
# print("pull local seek:", self.pullLocalSeek)
# print("pull remote seek:", self.pullRemoteSeek)
# print("push local seek:", self.pushLocalSeek)
# print("push remote seek:", self.pushRemoteSeek)
def inBoundWorker(self) -> None: # background in-bound worker
while not self.closed:
if self.recvIntoBuffer():
continue
else:
break
def watchDogWorker(self) -> None: # watch dog worker shuts down the connection when it assumes that
while not self.closed:
time.sleep(1)
with self.lock:
makingProgress = (time.time() - self.lastEchoTimeStamp) < self.watchDogTimeout
if not makingProgress:
# print("watchdog barks")
# print("pull local seek:", self.pullLocalSeek)
# print("pull remote seek:", self.pullRemoteSeek)
# print("push local seek:", self.pushLocalSeek)
# print("push remote seek:", self.pushRemoteSeek)
self.close()
def recvIntoBuffer(self) -> bool: # receive packet, decode packet, update pull buffer, pull remote seek, pull local seek, push remote seek
data, addr = self.socket.recvfrom() # decode segment
if not data:
return False
self.lock.acquire()
self.lastEchoTimeStamp = time.time()
try:
decoded = self.decodeSegment(data) # if corrupted, will catch an exception here
except ValueError:
# print("corrupted.")
# self.sendAck(self.pushLocalSeek, self.pullLocalSeek)
self.lock.release()
return True
seq = decoded["seq"]
ack = decoded["ack"]
control = decoded["control"]
body = decoded["body"]
# print(">", seq, ack, control, body)
self.pullRemoteSeek = max(self.pullRemoteSeek, seq + len(body)) # remote has written until
self.pushRemoteSeek = max(self.pushRemoteSeek, ack) # remote has read until
if body:
self.pullBuffer[seq] = body
if self.pullLocalSeek == self.pullRemoteSeek:
pass
else:
seek = self.pullLocalSeek
while True:
if seek not in self.pullBuffer:
break
else:
seek += len(self.pullBuffer[seek])
self.pullLocalSeek = seek # we can acknowledge data until
else: # no data
pass
self.lock.release()
return True
def sendAck(self, seq: int, ack: int) -> None:
self.sendSegment(seq, ack)
def sendSegment(self, seq: int, ack: int, body: bytes=b"") -> None:
header = struct.pack(">ll", seq, ack)
segment = header + body
hasher = hashlib.sha1()
hasher.update(segment)
checksum = hasher.digest()[: 8] # checksum is calculated over seq, ack, body
segment = header + checksum + body
# print("<", seq, ack, checksum, body)
self.socket.sendto(segment, (self.dst_ip, self.dst_port))
def decodeSegment(self, data: bytes=b"") -> dict:
seqack = data[: 8]
control = data[8: 16] # checksum
body = data[16: ]
hasher = hashlib.sha1()
hasher.update(seqack)
hasher.update(body)
checksum = hasher.digest()[: 8]
if checksum != control:
raise ValueError("Corrupted")
seq, ack = struct.unpack(">ll", seqack)
return {
"seq": seq,
"ack": ack,
"control": control,
"body": body,
}
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
# this sample code just calls the recvfrom method on the LossySocket
while True:
if self.seek in self.pullBuffer: # if requested segment has already arrived
with self.lock:
res = self.pullBuffer.pop(self.seek)
self.seek += len(res)
break # feed body to upper layer immediately
elif not self.closed: # if not arrived yet, wait
self.recvIntoBuffer() # busy wait. could be optimized using thread conditional value
else: # if closed
raise Exception("Connection is already closed.")
return res
# For now, I'll just pass the full UDP payload to the app
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
# your code goes here, especially after you add ACKs and retransmissions.
while True:
with self.lock:
unsynced = self.pushLocalSeek != self.pushRemoteSeek or self.pullLocalSeek != self.pullRemoteSeek # remote side is not fully synced with local side
makingProgress = (time.time() - self.lastEchoTimeStamp) < self.closeWaitTimeout # local side is anxious waiting to close, so timeout is smaller here
# print("pull local seek:", self.pullLocalSeek)
# print("pull remote seek:", self.pullRemoteSeek)
# print("push local seek:", self.pushLocalSeek)
# print("push remote seek:", self.pushRemoteSeek)
if unsynced and makingProgress: # if remote and local are not fully synced but are at least making some progress (because remote is alive)
time.sleep(0.1) # keep waiting
# print("wait")
else: # if fully synced or not remote is possibly dead
# print("unsynced:", unsynced, "makingProgress:", makingProgress)
break # close immediately
self.socket.stoprecv()
self.closed = True
# print("pull buffer size:", len(self.pullBuffer))
# print("push buffer size:", len(self.pushBuffer))
# print("---")
# print("pull local seek:", self.pullLocalSeek)
# print("pull remote seek:", self.pullRemoteSeek)
# print("push local seek:", self.pushLocalSeek)
# print("push remote seek:", self.pushRemoteSeek)
class Streamer:
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
# Send info
self.send_next_seq_n = 0
self.acked_n = 0
self.ACK_TIMEOUT = 0.25 # seconds
self.send_q = queue.PriorityQueue() # queue of InflightPacket
# Recv info
self.recv_expect_seq_n = 0
self.recv_q = queue.PriorityQueue()
# listener thread
self.closed = False
self.should_close = False
executor = ThreadPoolExecutor(max_workers=2)
executor.submit(self._listener)
executor.submit(self._sender)
def send(self, data_bytes: bytes, timeout_s=None) -> None:
"""Note that data_bytes can be larger than one packet."""
timeout_s = timeout_s if timeout_s else self.ACK_TIMEOUT
while data_bytes:
if len(data_bytes) > PAYLOAD_SIZE:
recv_buf_size = len(data_bytes) - PAYLOAD_SIZE
else:
recv_buf_size = 0
send_buf = Packet(
seq_n=self.send_next_seq_n,
recv_buf_size=recv_buf_size,
payload=data_bytes[:PAYLOAD_SIZE],
).to_bytes()
self.send_q.put(
InflightPacket(seq_n=self.send_next_seq_n,
start_time=None,
timeout_s=timeout_s,
packet=send_buf))
self.send_next_seq_n += 1
# print(
# f"Sent (and recv'ed ack for): {data_bytes[:PAYLOAD_SIZE]}, remaining: {data_bytes[PAYLOAD_SIZE:]}"
# )
data_bytes = data_bytes[PAYLOAD_SIZE:]
def _sender(self):
"""Sender background thread"""
inflight_q: List[InflightPacket] = [] # actual inflight packets
while not self.closed or not inflight_q.empty():
# print(f"Loop 1, {self.send_q.empty()}")
# First check send_q for new packets to send
while not self.send_q.empty() and len(inflight_q) < 25:
# print(f"Loop 2, {self.send_q.empty()}")
new_packet: InflightPacket = self.send_q.get()
new_packet.start_time = time.time()
self.socket.sendto(new_packet.packet,
(self.dst_ip, self.dst_port))
inflight_q.append(new_packet)
# Check acks for inflight packets
# iterate through inflight packets, remove those <= acked_n
# for the packet (acked_n + 1), check timer
idx = -1
resend_all = False
for i, pack in enumerate(inflight_q):
if pack.seq_n <= self.acked_n:
# packet has been acked, update idx to be removed
idx = i
else:
# earliest packet not acked, check timer
if (time.time() - pack.start_time) > pack.timeout_s:
# print(f"seq_n {pack.seq_n} timed out")
resend_all = True
break
if idx > 0:
inflight_q = inflight_q[idx:]
if resend_all:
# if first packet after previous ack'ed timed out,
# all packets after have also timed out. Resend all
for pack in inflight_q:
pack.start_time = time.time()
self.socket.sendto(pack.packet,
(self.dst_ip, self.dst_port))
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
while not self.closed:
packet = self.recv_q.get()
print(f"Recv'ed seq_n = {packet.seq_n}")
if packet.seq_n == self.recv_expect_seq_n:
self.recv_expect_seq_n += 1
# send ack
send_buf = Packet(seq_n=packet.seq_n,
recv_buf_size=0,
ack=True).to_bytes()
self.socket.sendto(send_buf, (self.dst_ip, self.dst_port))
return packet.payload
if packet.seq_n < self.recv_expect_seq_n:
# This packet was received twice, ignore
continue
else:
self.recv_q.put(packet)
def _listener(self):
"""Listener running in a background thread"""
while not self.closed:
print("Listener loop")
try:
buf, addr = self.socket.recvfrom()
if not buf:
continue
try:
packet = Packet.from_bytes(buf)
except PacketCorruptError:
# Ignore corrupt packets and wait for a resend due to timeout
# print("Corruption detected")
continue
if packet.ack:
self.acked_n = packet.seq_n
if packet.fin:
self.should_close = True
continue
elif packet.fin:
# send fin ack
send_buf = Packet(seq_n=packet.seq_n,
recv_buf_size=0,
ack=True,
fin=True).to_bytes()
self.socket.sendto(send_buf, (self.dst_ip, self.dst_port))
self.should_close = True
continue
self.recv_q.put(packet)
except Exception as e:
print("Listener died!")
print(e)
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
# your code goes here, especially after you add ACKs and retransmissions.
if not self.should_close:
# print(f"close called, queue size: {self.buf_q.qsize()}")
fin_pack = Packet(seq_n=self.send_next_seq_n, fin=True)
# Sends and waits for FIN ACK
self.send(fin_pack.to_bytes(), timeout_s=2)
# Send ACK
ack_pack = Packet(seq_n=self.send_next_seq_n, ack=True)
self.socket.sendto(ack_pack.to_bytes(),
(self.dst_ip, self.dst_port))
self.closed = True
self.socket.stoprecv()
class Streamer:
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
#self.lock = Lock()
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.closed = False
#Buffers and Readers
self.recvBuffer = []
self.sendBuffer = []
self.sCurrSeq = 0
self.rCurrSeq = 0
self.retData = b""
self.ack = False
self.thread = ThreadPoolExecutor(max_workers=1)
self.thread.submit(self.listener)
#Retransmit Trackers
self.wOn = 0
self.EarliestAck = 0
self.sTimer = None
self.ackTimer = 0
#TeardownStuff
self.tDownAck = False
self.tDownReq = False
self.tDownTimer = 0
self.tDownForceTimer = None
def sortHelp(self, tuple):
return tuple[0]
def calcCSum(self, packet):
m = md5()
m.update(packet)
checksum = m.digest()
checksum = checksum[0:8]
#print(checksum)
return checksum
def sRetransmit(self):
print("Retransmitting...")
#print(self.sendBuffer)
if (self.sendBuffer and not self.closed):
for rPack in self.sendBuffer:
self.socket.sendto(rPack, (self.dst_ip, self.dst_port))
self.sTimer = Timer(0.25, self.sRetransmit)
self.sTimer.start()
def send(self, data_bytes: bytes) -> None:
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
dataLeft = data_bytes
datasize = len(data_bytes)
while len(dataLeft) > 0:
toSend = min(len(dataLeft), 1450)
sendNow = dataLeft[0:toSend]
packet = pack("ll??", self.sCurrSeq, datasize, False, False)
chSend = packet + sendNow
checksum = self.calcCSum(chSend)
fpacket = packet + checksum + sendNow
self.socket.sendto(fpacket, (self.dst_ip, self.dst_port))
dataLeft = dataLeft[toSend:]
self.sendBuffer.append(fpacket)
self.sCurrSeq += 1
self.ack = False
if (self.wOn == 0):
self.EarliestAck = 0
self.sTimer = Timer(0.25, self.sRetransmit)
self.sTimer.start()
self.wOn += 1
while self.wOn >= 15:
time.sleep(0.01)
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
# this sample code just calls the recvfrom method on the LossySocket
retData = b""
#print(self.rCurrSeq)
if (len(self.recvBuffer) > 0):
self.recvBuffer = sorted(self.recvBuffer, key=self.sortHelp)
extractedFList = []
#print(self.recvBuffer)
for i in self.recvBuffer:
if (i[0][0] == self.rCurrSeq):
self.retData += i[2]
self.rCurrSeq += 1
extractedFList.append(i)
for z in extractedFList:
self.recvBuffer.remove(z)
returned = self.retData
self.retData = b""
return returned
def tDownForce(self):
print("TearDown Forced")
self.tDownAck = True
def listener(self):
while not self.closed:
#print("listening...")
try:
data, addr = self.socket.recvfrom()
if (len(data) != 0):
pHeader = data[0:10]
pPayload = data[10:]
packet = (
unpack("ll??", pHeader),
pPayload[0:8],
pPayload[8:],
)
checksum = 0
recChecksu = packet[1]
chSend = pack("ll??", packet[0][0], packet[0][1],
packet[0][2], packet[0][3]) + packet[2]
print("Header: ", packet[0][0], packet[0][1], packet[0][2],
packet[0][3], " Payload: ", packet[2])
checksum = self.calcCSum(chSend)
if (checksum == recChecksu):
if (
packet[0][2]
and packet[0][0] > self.EarliestAck
and not packet[0][3]
): #Packet is an Ack and is Acknowledging a more recent packet
newEarliest = packet[0][0] - 1
packetsConfirmed = newEarliest - self.EarliestAck
for i in range(packetsConfirmed):
self.sendBuffer.pop(0)
self.wOn += -packetsConfirmed
self.EarliestAck = newEarliest
self.sTimer.cancel()
self.sTimer = Timer(0.25, self.sRetransmit)
self.sTimer.start()
elif (packet[0][2] and packet[0][3]
and self.tDownReq): #Packet is a Teardown Ack
self.tDownAck = True
elif (
not packet[0][2] and not packet[0][3]
): #Packet is neither a teardown req nor an ACK -- its data
if (packet[0][0] >= self.rCurrSeq
and packet not in self.recvBuffer
): #If we don't already have it, save it
self.recvBuffer.append(packet)
if ((time.perf_counter() - self.ackTimer) > 0.10
): #If we haven't acked recently, ack it.
self.ackTimer = time.perf_counter()
header = pack("ll??", self.rCurrSeq, 10, True,
False)
chSend = header + b" "
checksum = self.calcCSum(chSend)
fpacket = header + checksum + b" "
self.socket.sendto(
fpacket, (self.dst_ip, self.dst_port))
elif (
packet[0][3] and self.tDownReq
): #Packet is a Teardown Request and we are also in the process of tearing down; Send a Teardown Ack
header = pack("ll??", self.rCurrSeq, 10, True,
True)
chSend = header + b" "
checksum = self.calcCSum(chSend)
fpacket = header + checksum + b" "
self.socket.sendto(fpacket,
(self.dst_ip, self.dst_port))
self.tDownForceTimer = Timer(2.0, self.tDownForce)
self.tDownForceTimer.start()
except Exception as e:
print("listener died")
print(e)
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
header = pack("ll??", self.rCurrSeq, 10, False, True)
chSend = header + b" "
checksum = self.calcCSum(chSend)
fpacket = header + checksum + b" "
self.socket.sendto(fpacket, (self.dst_ip, self.dst_port))
self.tDownReq = True
self.tDownTimer = time.perf_counter()
while (not self.tDownAck):
time.sleep(0.05)
#print(self.tDownAck)
now_time = time.perf_counter()
if (now_time - self.tDownTimer > 0.20):
print("Retransmitting Teardown...")
self.socket.sendto(fpacket, (self.dst_ip, self.dst_port))
self.closed = True
self.sTimer.cancel()
self.thread.shutdown()
print("SUCCESSFULLY CLOSED")
self.socket.stoprecv()
class Streamer:
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.send_seq = 0x00000000
self.send_buffer = dict()
self.recv_seq = 0x00000000
self.recv_buffer = dict()
self.closed = False
self.executor = concurrent.futures.ThreadPoolExecutor(max_workers=1)
self.executor.submit(self.listener)
self.acks = set()
self.nagles_binary_string = b''
def resend(self, seq):
self.socket.sendto(self.send_buffer[seq], (self.dst_ip, self.dst_port))
return Timer(.5, self.repeat, [seq]).start()
def send(self, data_bytes: bytes) -> None:
if not len(self.nagles_binary_string):
Timer(0.05, self.nagles_algorithm, [len(data_bytes)]).start()
self.nagles_binary_string = data_bytes
else:
self.nagles_binary_string += data_bytes
def nagles_algorithm(self, currData):
if currData < len(self.nagles_binary_string):
return Timer(1, self.nagles_algorithm,
[len(self.nagles_binary_string)]).start()
for data in self.partition_data(self.nagles_binary_string):
self.send_buffer[self.send_seq] = self.build_packet(
data, 0, self.send_seq, 0)
self.resend(self.send_seq)
self.send_seq += 1
self.nagles_binary_string = b''
def repeat(self, seq):
if seq not in self.acks:
self.resend(seq)
def send_ack(self, seq):
#print("Sending Acknowledgement for Packet #" + str(seq))
self.socket.sendto(self.build_packet(bytes(), 1, seq, 0),
(self.dst_ip, self.dst_port))
def send_fin(self):
self.socket.sendto(self.build_packet(bytes(), 0, self.send_seq, 1),
(self.dst_ip, self.dst_port))
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
while self.recv_seq not in self.recv_buffer:
time.sleep(0.01)
self.recv_seq += 1
return self.recv_buffer.pop(self.recv_seq - 1)
def close(self) -> None:
while self.send_seq not in self.acks:
self.send_fin()
time.sleep(0.1)
print("FIN HANDSHAKE")
time.sleep(15)
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
self.closed = True
self.socket.stoprecv()
def listener(self):
while not self.closed:
try:
packet = self.socket.recvfrom()[0]
if packet:
seq, ack, fin, stored_hash, data = self.deconstruct_packet(
packet)
comparison_packet = struct.pack(
'iii' + str(len(data)) + 's', seq, ack, fin, data)
# print('comparison packet seq: ', seq)
# print(comparison_packet)
hashed_packet_code = self.hash_helper(comparison_packet)
hash_check = self.hash_validation(stored_hash,
hashed_packet_code)
if hash_check:
continue
if ack:
self.acks.add(seq)
elif fin:
self.send_ack(seq)
else:
self.recv_buffer[seq] = data
self.send_ack(seq)
except Exception as e:
print("listener died!")
print(e)
def partition_data(self, data):
return (data[0 + i:1444 + i] for i in range(0, len(data), 1444))
# packs data and hashes it
def build_packet(self, data, ack, seq, fin):
first_packet = struct.pack('iii' + str(len(data)) + 's', seq, ack, fin,
data)
# print('first packet for seq', seq)
# print(first_packet)
hashed_packet_code = self.hash_helper(first_packet)
return struct.pack('iii16s' + str(len(data)) + 's', seq, ack, fin,
hashed_packet_code, data)
def deconstruct_packet(self, data):
return struct.unpack('iii16s' + str(len(data) - 28) + 's', data)
def hash_validation(self, stored_hash, hashed_packet_code):
# hashed_code = self.hash_helper(data)
if (stored_hash == hashed_packet_code): return False
return True
# returns a hash value
def hash_helper(self, data):
m = hashlib.md5()
m.update(data)
return m.digest()
class Streamer:
def __init__(self, dst_ip, dst_port,
src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.data = b''
self.seqnum = 0 # sending seq num
self.recvnum = 1 # receiver's current receiving number in order
self.buffer = {} # receiving buffer
self.ack = [] # all the ACKs we've received
self.TIMER_THREAD = {}
self.MD5 = {}
# self.NagleBuffer = b''
# self.fin = 0 # initialize the fin signal
# self.finACK = 0 # initialize the ACK of fin
self.flag = 1
self.nagleEnd = 0
# self.secfin = 0
self.retranHeader = {}
self.executor = ThreadPoolExecutor(max_workers=2)
self.executor.submit(self.listener)
self.executor.submit(self.nagle)
def nagle(self) -> None:
# print("a")
while self.nagleEnd == 0:
# print("b")
temp = self.data
# print("self.data",self.data)
time.sleep(0.25)
if temp == self.data and temp != b'':
self.nagleEnd = 1
self.send(temp)
# print("c")
break
def listener(self) -> None:
# print(self.flag)
while self.flag == 1:
# print("a")
ss, addr = self.socket.recvfrom()
# print("b")
if addr == ("", 0):
# print(self.flag)
# print("c")
break
if len(ss) <= 34: # if receive ACK, STOP corresponding TIMER
# print("e")
cmd = "!H32s"
# print("收到ss:",ss)
this_ack, ackchsm = struct.unpack(cmd, ss)
# print("收到this_ack:",this_ack)
rcv_csm = self.getchecksum(str(this_ack).encode()).encode()
# print("计算rcv_csm:",rcv_csm)
# print("收到ackhsm：",ackchsm)
if rcv_csm == ackchsm:
# print("收到ACK chsm: == ")
self.ack.append(this_ack)
# print("ack:", self.ack)
if this_ack == 0:
self.finACK = 1
# print("f")
else:
continue
# print("不等rec:",rcv_csm," & ",ackchsm)
else: # if receive DATA, put into buffer
# print("g")
cmd = "!H32s" + str(len(ss) - 34) + "s"
header_sq, chsm, data = struct.unpack(cmd, ss)
# print("receive data header",header_sq)
# print("receive data :",data)
# print("Got header is %d" % header)
# if checksum is wrong, drop the packet, resend
databody = str(header_sq).encode() + data
recv_chsm = self.getchecksum(databody).encode()
# print("databody",databody)
# print("chsm:",chsm)
# print("recv_chsm",recv_chsm)
if recv_chsm != chsm:
# print("recv_chsm != chsm")
continue
if recv_chsm == chsm:
# print("h")
# print("recv_chsm == chsm")
if header_sq < self.recvnum:
# print("header<recvnum, recvnum is ", self.recvnum)
ack = struct.pack("!H32s", header_sq, self.getchecksum(str(header_sq).encode()).encode()) #--ack = struct.pack("!H", header_sq)
# print("多余ack",header_sq)
# self.socket.sendto(ack, (self.dst_ip, self.dst_port))
else:
self.buffer.update({header_sq: data})
# print("buffer.update::::", self.buffer)
# print("buffer update header:",header_sq)
ack = struct.pack("!H32s", header_sq, self.getchecksum(str(header_sq).encode()).encode()) #ack = struct.pack("!H", header_sq)
# print("buffer:",self.buffer)
# print("发送ack", header_sq)
self.socket.sendto(ack, (self.dst_ip, self.dst_port))
# print("i")
# print("--Sent ACK:", header_sq)
else:
# print("ERROR checksum, dropped the packet..")
# print("##:", header_sq)
continue # ignore this packet
def retransmission(self, ss: struct) -> None:
# resend ss after exceeding time
# self.socket.sendto(ss, (self.dst_ip, self.dst_port))
# deparse the ss to get the header
time.sleep(0.25)
cmd = "!H32s" + str(len(ss) - 34) + "s"
header, _, dt = struct.unpack(cmd, ss)
if header not in self.ack:
# print("重发", header)
self.socket.sendto(ss, (self.dst_ip, self.dst_port))
time.sleep(0.5)
self.retransmission(ss)
# t2 = Timer(0.5, self.retransmission, (ss,)) # self.seqnum,
# if dt != str("\r\n").encode():
# self.TIMER_THREAD.update({header: t2})
# t2.start()
else:
self.ack.remove(header)
# print("丢：",header)
# if dt == str("\r\n").encode():
# if self.finACK != 1:
# time.sleep(1)
# self.retransmission(ss)
# else:
self.TIMER_THREAD.pop(header)
def send(self, data_bytes: bytes) -> None:
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
raw_data = data_bytes
# self.data += raw_data
if len(self.data) + len(raw_data) <= 1438 and self.nagleEnd == 0:
self.data += raw_data
return None
if self.nagleEnd == 1:
self.data = raw_data
# if self.data == b'':
# self.data = raw_data
# print("all data:", self.data)
while True:
# if len(raw_data) > 1438:
if len(self.data) > 1438:
# packet_data_bytes = raw_data[0:1438] # !python note: range needs to cover the higher index
packet_data_bytes = self.data[0:1438]
# raw_data = raw_data[1438:]
raw_data = self.data[1438:]
self.seqnum += 1
# warp header+data, combine seqNum & checksum
databody = str(self.seqnum).encode() + packet_data_bytes
chks = self.getchecksum(databody).encode()
# print("CHECKSUM LEN: ", len(chks))
ss = struct.pack("!H32s1438s", self.seqnum, chks, packet_data_bytes)
self.socket.sendto(ss, (self.dst_ip, self.dst_port))
t_1 = Timer(0.5, self.retransmission, (ss,))
self.TIMER_THREAD.update({self.seqnum: t_1})
t_1.start()
time.sleep(0.1)
else:
# if len(raw_data) != 0:
if len(self.data) != 0:
self.seqnum += 1
# self.retranHeader.update({self.seqnum:1})
# cmd = "!H32s" + str(len(raw_data)) + "s"
cmd = "!H32s" + str(len(self.data)) + "s"
# databody = str(self.seqnum).encode() + raw_data
databody = str(self.seqnum).encode() + self.data
chks = self.getchecksum(databody).encode()
# ss = struct.pack(cmd, self.seqnum, chks, raw_data)
ss = struct.pack(cmd, self.seqnum, chks, self.data)
self.socket.sendto(ss, (self.dst_ip, self.dst_port))
t = Timer(0.5, self.retransmission, (ss,))
if raw_data != str("\r\n").encode():
self.TIMER_THREAD.update({self.seqnum: t})
t.start()
time.sleep(0.1)
# raw_data = b''
if len(raw_data) > 1438 and self.data == b'':
# print("111")
self.data = raw_data
continue
self.data = raw_data
raw_data = b''
# print("remain",self.data)
if self.nagleEnd == 1:
self.data = b''
if len(self.data) == 0:
# print("send end")
break
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
rs = ''
while True:
if self.buffer == {}:
continue
m = max(self.buffer.keys())
for i in range(self.recvnum, m+1):
if self.recvnum in self.buffer.keys():
rs = rs + self.buffer.pop(self.recvnum).decode()
self.recvnum += 1
if rs == '':
continue
break
return rs.encode()
def getchecksum(self, databody):
md5 = hashlib.md5()
md5.update(databody)
chks = md5.hexdigest()
# self.MD5.update({seq:chks})
return chks
# def SecondClose(self):
# if self.finACK != 1 or self.fin != 1:
# self.sendFin()
#
# def sendFin(self):
# while True:
# if len(self.TIMER_THREAD.keys()) == 0:
# self.ack.append(self.seqnum + 1)
# self.send(str("\r\n").encode())
# break
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
while True:
# print("self.buffer",self.buffer)
if len(self.buffer) == 0:
time.sleep(5)
# print("self.buffer", self.buffer)
if len(self.buffer) == 0:
self.socket.stoprecv()
self.flag = 0
self.nagleEnd = 1
break
class Streamer:
def __init__(self, dst_ip, dst_port,
src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.expected_num = 0
self.rec_buf = {}
self.timer_buf = {}
self.ack_buf = []
self.listener = True
self.timeout = 1
self.other_fin = False
executor = ThreadPoolExecutor(max_workers=3)
executor.submit(self.listening)
executor.submit(self.acking)
def listening(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
while self.listener:
data, addr = self.socket.recvfrom()
if data and data[0] == 65:
self.ack_recv(data)
elif data and data[0] == 70:
self.other_fin = True
elif data:
seq_num = get_seq_num(data)
self.rec_buf[seq_num] = data
# self.ack_send(data)
self.ack_buf.append(data)
print('are we still listening?')
print('something broke us out of the loop!')
def acking(self):
while self.listener:
while self.ack_buf:
self.ack_send(self.ack_buf[0])
self.ack_buf.pop(0)
def send(self, data_bytes: bytes):
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
# length check should be dif bc must make space for header
header = str(self.expected_num).encode('utf-8')+b'\r\n\r\n'
if len(data_bytes) + len(header) > 1472:
payload = data_bytes[:1472-len(header)]
self.socket.sendto(header+payload, (self.dst_ip, self.dst_port))
self.expected_num += 1472
timer = Timer(self.timeout, self.retransmission, [header+payload])
# expect_num already includes the new bytes making it an ACk
self.timer_buf[self.expected_num] = timer
# self.timer_buf[self.expected_num+len(payload)] = timer
timer.start()
print('Set timer in send with ack num: ', self.expected_num)
self.send(data_bytes[1472-len(header):])
else:
self.socket.sendto(header+data_bytes, (self.dst_ip, self.dst_port))
self.expected_num += len(header)+len(data_bytes)
timer = Timer(self.timeout, self.retransmission, [header+data_bytes])
#Expected_num already includes the bytes making it an ack
self.timer_buf[self.expected_num] = timer
# self.timer_buf[self.expected_num+len(data_bytes)] = timer
print('Set timer in send with ack num: ', self.expected_num)
timer.start()
def recv(self) -> bytes:
# if not expected data, return nothing
if self.expected_num not in self.rec_buf:
return b''
# if expected data, check buffer for contiguous segments and return total contiguous payload
application_data = self.rec_buf[self.expected_num]
self.rec_buf.pop(self.expected_num)
self.expected_num += len(application_data)
application_data = get_payload(application_data)
while self.expected_num in self.rec_buf:
data = self.rec_buf[self.expected_num]
self.rec_buf.pop(self.expected_num)
self.expected_num += len(data)
application_data += get_payload(data)
return application_data
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
# your code goes here, especially after you add ACKs and retransmissions.
print('Ready to close Timer buf: ' + str(self.timer_buf))
while len(self.timer_buf) != 0:
time.sleep(5)
print('Waiting Timer buf: ' + str(self.timer_buf))
pass
print('Closed Timer buf: ' + str(self.timer_buf))
self.send_fin()
print('Sent the fin')
while not self.other_fin:
time.sleep(5)
print('Waiting for the other to finish')
print('Sent the fin again just in case ~shrug~')
self.send_fin()
pass
print('And we have received word the other has finished')
self.listener = False
def send_fin(self):
fin = b'F\r\n\r\n'
self.socket.sendto(fin, (self.dst_ip, self.dst_port))
def ack_recv(self, data: bytes):
ack_num = get_ack_num(data)
print('Received Ack_num: ' + str(ack_num))
self.timer_buf[ack_num].cancel()
self.timer_buf.pop(ack_num)
def ack_send(self, data: bytes):
ack_num = str(get_seq_num(data)+len(data))
print('Sent Ack_num: ' + str(ack_num))
header = b'A'+ack_num.encode('utf-8')+b'\r\n\r\n'
self.socket.sendto(header, (self.dst_ip, self.dst_port))
def retransmission(self, data: bytes):
print('THE TIMER HAS RUN OUT with ACK number: ', get_seq_num(data)+len(data))
self.socket.sendto(data, (self.dst_ip, self.dst_port))
timer = Timer(self.timeout, self.retransmission, [data])
self.timer_buf[get_seq_num(data)+len(data)] = timer
# self.timer_buf[get_seq_num(data)] = timer
print("set timer in retransmit with ack num: ", get_seq_num(data)+len(data))
timer.start()
class Streamer:
def __init__(self, dst_ip, dst_port,
src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.expected_num = 0
self.rec_buf = {}
self.timer = None
self.timer_ack = -1
self.ack_buf = []
self.listener = True
self.timeout = .25
self.unacked = {}
self.other_fin = False
self.own_fin = False
executor = ThreadPoolExecutor(max_workers=3)
self.listening_future = executor.submit(self.listening)
self.acking_future = executor.submit(self.acking)
def listening(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
while self.listener:
data, addr = self.socket.recvfrom()
checksum = get_checksum(data)
if data:
calculated_checksum = self.calculate_checksum(data[4:])
if data and checksum == calculated_checksum:
if data and data[4] == 65:
self.ack_recv(data)
elif data and data[4] == 70:
self.other_fin = True
elif data:
seq_num = get_ack_or_seq_num(data)
if seq_num != -1:
self.rec_buf[seq_num] = data
self.ack_buf.append(data)
def acking(self):
while self.listener:
while self.ack_buf:
self.ack_send(self.ack_buf[0])
self.ack_buf.pop(0)
#print('updated ack_buf: ' + str(self.ack_buf))
def send(self, data_bytes: bytes):
"""Note that data_bytes can be larger than one packet."""
# length check should be dif bc must make space for header
seq_num = str(self.expected_num).encode('utf-8')
# checksum = 4 bytes,
# flag first, then checksum, then seq/ack number, then \r\n\r\n, then payload
if 4+1+len(data_bytes) + len(seq_num) + len(b'\r\n\r\n') > 1472:
payload = data_bytes[:1472-4-1-len(seq_num)-len(b'\r\n\r\n')]
checksum = self.calculate_checksum(
b'S'+seq_num+b'\r\n\r\n'+payload)
header = checksum + b'S' + \
seq_num+b'\r\n\r\n'
# not_checksum = seq_num+b'\r\n\r\n'
# checksum = self.calculate_checksum(payload).encode('utf-8')
# header = seq_num+b'C'+checksum+b'\r\n\r\n'
self.socket.sendto(header+payload, (self.dst_ip, self.dst_port))
self.expected_num += len(header+payload)
self.unacked[self.expected_num] = header+payload
if len(self.unacked) == 1:
self.timer = Timer(
self.timeout, self.retransmission, [header+payload])
self.timer.start()
self.timer_ack = self.expected_num
self.send(data_bytes[1472-len(header):])
else:
checksum = self.calculate_checksum(
b'S'+seq_num+b'\r\n\r\n'+data_bytes)
message = checksum+b'S'+seq_num+b'\r\n\r\n'+data_bytes
self.socket.sendto(message, (self.dst_ip, self.dst_port))
self.expected_num += len(message)
self.unacked[self.expected_num] = message
if len(self.unacked) == 1:
self.timer = Timer(
self.timeout, self.retransmission, [message])
self.timer.start()
self.timer_ack = self.expected_num
def recv(self) -> bytes:
# if not expected data, return nothing
if self.expected_num not in self.rec_buf:
return b''
# if expected data, check buffer for contiguous segments and return total contiguous payload
application_data = self.rec_buf[self.expected_num]
self.rec_buf.pop(self.expected_num)
self.expected_num += len(application_data)
application_data = get_payload(application_data)
while self.expected_num in self.rec_buf:
data = self.rec_buf[self.expected_num]
self.rec_buf.pop(self.expected_num)
self.expected_num += len(data)
application_data += get_payload(data)
return application_data
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions
your code goes here, especially after you add ACKs and retransmissions."""
print('close initiated')
while len(self.unacked) != 0:
pass
print('no more unacked')
self.send_fin()
self.own_fin = True
while not self.other_fin:
self.send_fin()
print('other one has no acks')
while(threading.active_count() > 4):
pass
#print('threading count less than 4')
self.socket.stoprecv()
self.listener = False
def send_fin(self):
fin = b'F\r\n\r\n'
checksum = self.calculate_checksum(fin)
self.socket.sendto(checksum+fin, (self.dst_ip, self.dst_port))
def ack_recv(self, data: bytes):
ack_num = get_ack_or_seq_num(data)
if ack_num != -1 and ack_num in self.unacked:
self.unacked.pop(ack_num)
if ack_num and ack_num == self.timer_ack:
self.timer.cancel()
if self.unacked:
new_timer_ack = sorted(self.unacked.keys())[0]
self.timer_ack = new_timer_ack
self.timer = Timer(
self.timeout, self.retransmission, [self.unacked[new_timer_ack]])
self.timer.start()
else:
self.timer = None
self.timer_ack = -1
def ack_send(self, data: bytes):
ack_num = str(get_ack_or_seq_num(data)+len(data))
rest = b'A'+ack_num.encode('utf-8')+b'\r\n\r\n'
checksum = self.calculate_checksum(rest)
self.socket.sendto(checksum+rest, (self.dst_ip, self.dst_port))
def retransmission(self, data: bytes):
if not (self.other_fin and self.own_fin):
self.socket.sendto(data, (self.dst_ip, self.dst_port))
self.timer = Timer(self.timeout, self.retransmission, [data])
self.timer.start()
def calculate_checksum(self, msg: bytes) -> bytes:
try:
msg = msg.decode('utf-8')
s = 0 # Binary Sum
# loop taking 2 characters at a time
for i in range(0, len(msg), 2):
if (i+1) < len(msg):
a = ord(msg[i])
b = ord(msg[i+1])
s = s + (a+(b << 8))
elif (i+1) == len(msg):
s += ord(msg[i])
else:
raise "Something Wrong here"
s = s + (s >> 16)
s = ~s & 0xffff
s = str(hex(s)[2:])
while len(s) < 4:
s = "0"+s
return s.encode('utf-8')
except:
return b''
class Streamer:
def __init__(self, dst_ip, dst_port,
src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
#sequence numbers
self.seq_num = 0
self.recv_num = 0
#send & receive buffers
#self.s_buff = {}
self.r_buff = {}
def send(self, data_bytes: bytes) -> None:
"""Note that data_bytes can be larger than one packet."""
# Your code goes here! The code below should be changed!
while len(data_bytes) > 1468:
header = pack('i', self.seq_num)
sbytes = header + data_bytes[0:1468]
self.socket.sendto(sbytes, (self.dst_ip, self.dst_port))
data_bytes = data_bytes[1468:]
self.seq_num = self.seq_num + 1
#self.s_buff[self.seq_num] = sbytes
header = pack('i', self.seq_num)
sbytes = header + data_bytes
self.socket.sendto(sbytes, (self.dst_ip, self.dst_port))
self.seq_num = self.seq_num + 1
def recv(self) -> bytes:
"""Blocks (waits) if no data is ready to be read from the connection."""
# your code goes here! The code below should be changed!
while True:
#can be while loop too
if self.recv_num in self.r_buff:
data = self.r_buff[self.recv_num]
# dont technically need this
# del self.r_buff[self.recv_num]
self.recv_num += 1
return data
data, addr = self.socket.recvfrom(1472)
recv_header = unpack('i', data[0:4])[0]
data = data[4:]
self.r_buff[recv_header] = data
def close(self) -> None:
"""Cleans up. It should block (wait) until the Streamer is done with all
the necessary ACKs and retransmissions"""
# your code goes here, especially after you add ACKs and retransmissions.
pass
class Streamer:
def __init__(self, dst_ip, dst_port, src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
self.recv_buff = {}
self.recv_seq_num = 0
self.send_seq_num = 0
self.closed = False
self.ack = False
self.recv_fin = False
self.recv_finack = False
executor = concurrent.futures.ThreadPoolExecutor(max_workers=2)
executor.submit(self.listener)
def listener(self):
while not self.closed:
try:
data, addr = self.socket.recvfrom()
if len(data) == 0:
continue
recv_packet_num = struct.unpack('i', data[0:4])[0]
is_ack = struct.unpack('i', data[4:8])[0]
is_fin = struct.unpack('i', data[8:12])[0]
data_bytes = data[12:]
if len(data_bytes) > 0:
is_ack = 0
is_fin = 0
if is_fin:
# Case1: A FINACK packet is received
if is_ack:
print('FINACK received.')
self.recv_finack = True
# Case2: A FIN packet is received - We FINACK the FIN
else:
print('FIN received.')
self.recv_fin = True
print('sending FINACK...')
self.send(b'', 1, 1)
else:
# Case3: An ACK packet is received - We notify the main thread that an ACK was received
if is_ack == 1:
print('ACK received for packet ', recv_packet_num)
self.ack = True
# Case4: The received packet is normal data that we must add to the recv buffer
else:
data_bytes = data[12:]
# Add the data to the receive buffer
self.recv_buff[recv_packet_num] = data_bytes
# Send ACK packet
print('ACK sent for packet ', self.recv_seq_num)
self.socket.sendto(
struct.pack('iii', recv_packet_num, 1, 0),
(self.dst_ip, self.dst_port))
except Exception as e:
print("listener died!")
print(e)
def send(self, data_bytes: bytes, is_ack=0, is_fin=0) -> None:
if is_ack or is_fin:
self.socket.sendto(
struct.pack('iii', self.recv_seq_num, is_ack, is_fin),
(self.dst_ip, self.dst_port))
print('ack number: ', self.recv_seq_num)
return
# Break up the data into chunks of 1460 bytes and send it
while len(data_bytes) > 1460:
header = struct.pack('iii', self.send_seq_num, is_ack, is_fin)
packet = header + data_bytes[0:1460]
self.socket.sendto(packet, (self.dst_ip, self.dst_port))
self.ack = False
time.sleep(0.15)
# Waiting to receive an ACK for the sent data before the send is "completed"
while not self.ack:
time.sleep(0.25)
if not self.ack:
self.socket.sendto(packet, (self.dst_ip, self.dst_port))
else:
break
data_bytes = data_bytes[1460:]
self.send_seq_num = self.send_seq_num + 1
# Sending the last packet of data of len <= 1464 bytes
header = struct.pack('iii', self.send_seq_num, is_ack, is_fin)
packet = header + data_bytes
self.socket.sendto(packet, (self.dst_ip, self.dst_port))
self.send_seq_num = self.send_seq_num + 1
self.ack = False
time.sleep(0.25)
# Waiting to receive an ACK for the sent data before the send is "completed"
while not self.ack:
time.sleep(0.25)
if not self.ack:
self.socket.sendto(packet, (self.dst_ip, self.dst_port))
else:
break
def recv(self) -> bytes:
while True:
if self.recv_seq_num in self.recv_buff:
data_bytes = self.recv_buff[self.recv_seq_num]
self.recv_buff.pop(self.recv_seq_num)
self.recv_seq_num = self.recv_seq_num + 1
return data_bytes
def close(self) -> None:
print('sending FIN...')
self.send(b'', 0, 1)
while not self.recv_finack:
time.sleep(0.1)
if not self.recv_finack:
self.send(b'', 0, 1)
else:
break
while not self.recv_fin:
print('waiting to receive a FIN...')
time.sleep(0.1)
time.sleep(2)
print('Closing...')
self.closed = True
self.socket.stoprecv()
return
class Streamer:
def __init__(self, dst_ip, dst_port,
src_ip=INADDR_ANY, src_port=0):
"""Default values listen on all network interfaces, chooses a random source port,
and does not introduce any simulated packet loss."""
self.socket = LossyUDP()
self.socket.bind((src_ip, src_port))
self.dst_ip = dst_ip
self.dst_port = dst_port
# Parameters for managing order
self.current_receiving_SEQ = 0
self.packing_seq = 0
self.buffer = {}
# Thread management
self.closed = False
self.executor = concurrent.futures.ThreadPoolExecutor(max_workers=1)
self.listen_thread = self.executor.submit(self.listener)
# ACK management
self.ACK = {}
# FIN handshake
self.FIN = False # has the other party sent the fin message yet?
# Pipelining
self.sending_buffer = {}
# Extra Credit
self.all_data = b""
self.first_time = True
def send(self, data_bytes: bytes) -> None:
if self.first_time:
Timer(0.01, self.__data_check, [len(data_bytes)]).start()
self.first_time = False
self.all_data += data_bytes
def recv(self) -> bytes:
# If the desired packet is already in the buffer, return it. Othwerise, wait.
while self.current_receiving_SEQ not in self.buffer:
time.sleep(0.01)
self.current_receiving_SEQ += 1
return self.buffer.pop(self.current_receiving_SEQ-1)
def close(self) -> None:
self.__FIN_handshake()
self.closed = True
self.socket.stoprecv()
while not self.listen_thread.done():
time.sleep(0.01)
self.executor.shutdown()
def listener(self):
while not self.closed:
try:
data = self.socket.recvfrom()[0]
self.__packet_handler(data)
except Exception as e:
print("listener died!")
print(e)
return
#### HELPERS #####
#### Sending helpers
# Breaks data up into pieces no largers than 's'
# and returns a list of broken up pieces
def __byte_breaker(self, b: bytes, s: int):
return [b[i:i+s] for i in range(0, len(b), s)]
# Sends data and starts a timer
def __recursive_send(self, seq):
to_send = self.sending_buffer[seq]
self.socket.sendto(to_send, (self.dst_ip, self.dst_port))
Timer(1, self.__selective_repeat, [seq]).start()
return
# Checks if ACK is received. Calls __recursive_send if not.
def __selective_repeat(self, seq):
if seq not in self.ACK:
return self.__recursive_send(seq)
#### Nagles Algorithm Helpers (EC)
# Checks if there has been more data added to sending queue. If not, sends, otherwise
# it starts a timer to check again in 1 ms.
def __data_check(self, num):
if len(self.all_data) > num:
return Timer(0.01, self.__data_check, [len(self.all_data)]).start()
return self.__send_data()
# Takes the whole sending queue and sends it out with __recursive send for
# guaranteed delivery.
def __send_data(self):
byte_ls = self.__byte_breaker(self.all_data, 1456)
for data in byte_ls:
to_send = self.__packer(self.packing_seq, data, ack=False)
self.sending_buffer[self.packing_seq] = to_send
self.__recursive_send(self.packing_seq)
self.packing_seq += 1
self.first_time = True
self.all_data = b''
#### Helpers for packing and unpacking data with structs
# Packs a sequence number, data, ACK flag, and hash into a struct
def __packer(self, seq, data, ack=False) -> struct:
f = f'h {len(data)}s b'
insecure_struct = struct.pack(f, seq, data, ack)
secure_struct = self.__hash_pack(insecure_struct)
return secure_struct
# Unpacks a struct w/ a hash, sequence number, data, and ACK
def __unpacker(self, packed) -> tuple:
f = f'i h {len(packed)-7}s b'
return struct.unpack(f, packed)
#### Flow Control Helpers
# General function that deals with received packets. Sends things
# where they need to go depending on the type/state of the packet
def __packet_handler(self, _data):
if not _data:
return
seq, seg, ack = self.__unpacker(_data)[1:]
if not self.__hash_check(_data):
return
if ack:
self.ACK[seq] = True
elif seq == -1:
self.FIN = True
self.__send_ACK(seq)
else:
self.buffer[seq] = seg
self.__send_ACK(seq)
# Sends an ACK for a given seq number
def __send_ACK(self, seq):
f = 'h s b'
s = struct.pack(f, seq, b'a', True)
s = self.__hash_pack(s)
self.socket.sendto(s, (self.dst_ip, self.dst_port))
#### Helpers for the FIN handshake
# Recursively sends a FIN message to indicate that we're done sending
def __send_fin(self) -> None:
FIN = struct.pack('h 4s b', -1, b'done', False)
FIN = self.__hash_pack(FIN)
self.socket.sendto(FIN, (self.dst_ip, self.dst_port))
self.__wait_fin_ACK()
# Waits until an ACK for the FIN is received. If it's not recieved
# soon enough, it resends the FIN.
def __wait_fin_ACK(self):
count = 0
while -1 not in self.ACK:
time.sleep(0.01)
count += 1
if count > 25:
self.__send_fin()
# 1) Sends a message to indicate we're done sending data
# 2) Waits until we receive message
# 3) After receiving the FIN, we wait two seconds to make sure our FIN ACK
# doesn't get lost
def __FIN_handshake(self):
self.__send_fin()
while not self.FIN:
time.sleep(0.01)
time.sleep(3)
#### Helpers for creating and verifying hashes
# Given a packed struct, adds a hash to it
def __hash_pack(self, _struct):
f = f'i {len(_struct)}s'
code = adler32(_struct) % 2147483647 # keeps the result a 32 bit integer
return struct.pack(f, code, _struct)
# Given a packed struct, determines if the hash is valid
def __hash_check(self, _data):
expected = self.__unpacker(_data)[0]
actual = adler32(_data[4:]) % 2147483647
return expected == actual