def RequireVpnRoutes(self, target, title, wantroutes, debug=0):
import json
logstr = "RequireVpnRoutes " + str(wantroutes)
#non json form for humans
luCommand(target, 'vtysh -c "show bgp ipv4 vpn"', '.', 'None',
'Get VPN RIB (non-json)')
ret = luCommand(target, 'vtysh -c "show bgp ipv4 vpn json"', '.*',
'None', 'Get VPN RIB (json)')
if re.search(r'^\s*$', ret):
# degenerate case: empty json means no routes
if len(wantroutes) > 0:
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
rib = json.loads(ret)
rds = rib['routes']['routeDistinguishers']
for want in wantroutes:
found = 0
if debug:
print "want rd " + want['rd']
for rd in rds.iterkeys():
if rd != want['rd']:
continue
if debug:
print "found rd " + rd
table = rds[rd]
if self.routes_include_wanted(table, want, debug):
found = 1
break
if not found:
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
def RequireUnicastRoutes(self,
target,
afi,
vrf,
title,
wantroutes,
debug=0):
logstr = "RequireVpnRoutes %s" % str(wantroutes)
vrfstr = ""
if vrf != "":
vrfstr = "vrf %s" % (vrf)
if (afi != "ipv4") and (afi != "ipv6"):
self.log("ERROR invalid afi")
cmdstr = "show bgp %s %s unicast" % (vrfstr, afi)
# non json form for humans
cmd = 'vtysh -c "%s"' % cmdstr
luCommand(target, cmd, ".", "None",
"Get %s %s RIB (non-json)" % (vrfstr, afi))
cmd = 'vtysh -c "%s json"' % cmdstr
ret = luCommand(target, cmd, ".*", "None",
"Get %s %s RIB (json)" % (vrfstr, afi))
if re.search(r"^\s*$", ret):
# degenerate case: empty json means no routes
if len(wantroutes) > 0:
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
rib = json.loads(ret)
try:
table = rib["routes"]
# KeyError: 'routes' probably means missing/bad VRF
except KeyError as err:
if vrf != "":
errstr = "-script ERROR: check if wrong vrf (%s)" % (vrf)
else:
errstr = "-script ERROR: check if vrf missing"
luResult(target, False, title + errstr, logstr)
return
#if debug:
# self.log("table=%s" % table)
for want in wantroutes:
if debug:
self.log("want=%s" % want)
if not self.routes_include_wanted(table, want, debug):
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
def RequireUnicastRoutes(self,
target,
afi,
vrf,
title,
wantroutes,
debug=0):
vrfstr = ''
if vrf != '':
vrfstr = 'vrf %s' % (vrf)
if (afi != 'ipv4') and (afi != 'ipv6'):
print "ERROR invalid afi"
str = 'show bgp %s %s unicast json' % (vrfstr, afi)
cmd = 'vtysh -c "%s"' % str
ret = luCommand(target, cmd, '.*', 'None',
'Get %s %s RIB' % (vrfstr, afi))
if re.search(r'^\s*$', ret):
# degenerate case: empty json means no routes
if len(wantroutes) > 0:
luResult(target, False, title)
return
luResult(target, True, title)
rib = json.loads(ret)
table = rib['routes']
for want in wantroutes:
if not self.routes_include_wanted(table, want, debug):
luResult(target, False, title)
return
luResult(target, True, title)
def RequireVpnRoutes(self, target, title, wantroutes, debug=0):
import json
logstr = "RequireVpnRoutes " + str(wantroutes)
# non json form for humans
luCommand(
target,
'vtysh -c "show bgp ipv4 vpn"',
".",
"None",
"Get VPN RIB (non-json)",
)
ret = luCommand(
target,
'vtysh -c "show bgp ipv4 vpn json"',
".*",
"None",
"Get VPN RIB (json)",
)
if re.search(r"^\s*$", ret):
# degenerate case: empty json means no routes
if len(wantroutes) > 0:
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
rib = json.loads(ret)
rds = rib["routes"]["routeDistinguishers"]
for want in wantroutes:
found = 0
if debug:
self.log("want rd %s" % want["rd"])
for rd in rds.iterkeys():
if rd != want["rd"]:
continue
if debug:
self.log("found rd %s" % rd)
table = rds[rd]
if self.routes_include_wanted(table, want, debug):
found = 1
break
if not found:
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
def RequireUnicastRoutes(self,target,afi,vrf,title,wantroutes,debug=0):
logstr = "RequireVpnRoutes " + str(wantroutes)
vrfstr = ''
if vrf != '':
vrfstr = 'vrf %s' % (vrf)
if (afi != 'ipv4') and (afi != 'ipv6'):
print "ERROR invalid afi";
cmdstr = 'show bgp %s %s unicast' % (vrfstr, afi)
#non json form for humans
cmd = 'vtysh -c "%s"' % cmdstr
luCommand(target,cmd,'.','None','Get %s %s RIB (non-json)' % (vrfstr, afi))
cmd = 'vtysh -c "%s json"' % cmdstr
ret = luCommand(target,cmd,'.*','None','Get %s %s RIB (json)' % (vrfstr, afi))
if re.search(r'^\s*$', ret):
# degenerate case: empty json means no routes
if len(wantroutes) > 0:
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
rib = json.loads(ret)
try:
table = rib['routes']
# KeyError: 'routes' probably means missing/bad VRF
except KeyError as err:
if vrf != '':
errstr = '-script ERROR: check if wrong vrf (%s)' % (vrf)
else:
errstr = '-script ERROR: check if vrf missing'
luResult(target, False, title + errstr, logstr)
return
for want in wantroutes:
if not self.routes_include_wanted(table,want,debug):
luResult(target, False, title, logstr)
return
luResult(target, True, title, logstr)
from lutil import luCommand
luCommand('r1', 'vtysh -c "add vrf r1-cust1 prefix 99.0.0.1/32"', '.', 'none',
'IP Address')
luCommand('r3', 'vtysh -c "add vrf r3-cust1 prefix 99.0.0.2/32"', '.', 'none',
'IP Address')
luCommand('r4', 'vtysh -c "add vrf r4-cust1 prefix 99.0.0.3/32"', '.', 'none',
'IP Address')
luCommand('r1', 'vtysh -c "show vnc registrations local"', '99.0.0.1', 'pass',
'Local Registration')
luCommand('r3', 'vtysh -c "show vnc registrations local"', '99.0.0.2', 'pass',
'Local Registration')
luCommand('r4', 'vtysh -c "show vnc registrations local"', '99.0.0.3', 'pass',
'Local Registration')
luCommand('r1', 'vtysh -c "show vnc registrations remote"', '4 out of 4',
'wait', 'Remote Registration', 10)
luCommand('r3', 'vtysh -c "show vnc registrations remote"', '6 out of 6',
'wait', 'Remote Registration', 10)
luCommand('r4', 'vtysh -c "show vnc registrations remote"', '4 out of 4',
'wait', 'Remote Registration', 10)
luCommand('r1', 'vtysh -c "show vnc registrations"', '.', 'none')
luCommand('r3', 'vtysh -c "show vnc registrations"', '.', 'none')
luCommand('r4', 'vtysh -c "show vnc registrations"', '.', 'none')
from lutil import luCommand
ret = luCommand('ce1', 'vtysh -c "show ip route" | grep -c \\ 10\\.\\*/32','(.*)','pass', 'Looking for sharp routes')
found = luLast()
if ret != False and found != None:
num = int(found.group())
luCommand('ce3', 'vtysh -c "show bgp sum"',
'.', 'pass', 'See %s sharp routes' % num)
if num > 0:
wait = num/500
luCommand('ce1', 'vtysh -c "sharp remove routes 10.0.0.0 {}"'.format(num),'.','none','Removing {} routes'.format(num))
luCommand('ce2', 'vtysh -c "sharp remove routes 10.0.0.0 {}"'.format(num),'.','none','Removing {} routes'.format(num))
rtrs = ['ce1', 'ce2', 'ce3']
for rtr in rtrs:
luCommand(rtr, 'vtysh -c "show bgp ipv4 uni" | grep -c 10\\.\\*/32','^0$', 'wait', 'BGP routes removed', wait)
for rtr in rtrs:
luCommand(rtr, 'ip route show | grep -c \\^10\\.','^0$', 'wait', 'Linux routes removed', wait)
rtrs = ['r1', 'r3', 'r4']
for rtr in rtrs:
luCommand(rtr, 'ip route show vrf {}-cust1 | grep -c \\^10\\.'.format(rtr),'^0$','wait','VRF route removed',wait)
#done
from lutil import luCommand
rtrs = ["ce1", "ce2", "ce3", "r1", "r2", "r3", "r4"]
for rtr in rtrs:
ret = luCommand(
rtr,
'vtysh -c "show bgp neigh"',
"Notification received .([A-Za-z0-9/ ]*)",
"none",
"collect neighbor stats",
)
found = luLast()
if ret != False and found != None:
val = found.group(1)
ret = luCommand(
rtr,
'vtysh -c "show bgp neigh"',
"Notification received",
"fail",
"Notify RXed! {}".format(val),
)
# done
from lutil import luCommand
ret = luCommand('ce1', 'vtysh -c "show ip route" | grep -c \\ 10\\.\\*/32',
'(.*)', 'pass', 'Looking for sharp routes')
found = luLast()
if ret != False and found != None:
num = int(found.group())
luCommand('ce3', 'vtysh -c "show bgp sum"', '.', 'pass',
'See %s sharp routes' % num)
if num > 0:
rtrs = ['ce1', 'ce2', 'ce3']
for rtr in rtrs:
luCommand(rtr, 'vtysh -c "show bgp ipv4 uni" | grep Display', '.',
'none', 'BGP routes pre remove')
luCommand(rtr, 'ip route show | cat -n | tail', '.', 'none',
'Linux routes pre remove')
wait = 2 * num / 500
luCommand('ce1',
'vtysh -c "sharp remove routes 10.0.0.0 {}"'.format(num),
'.', 'none', 'Removing {} routes'.format(num))
luCommand('ce2',
'vtysh -c "sharp remove routes 10.0.0.0 {}"'.format(num),
'.', 'none', 'Removing {} routes'.format(num))
for rtr in rtrs:
luCommand(rtr, 'vtysh -c "show bgp ipv4 uni" | grep Display',
' 10 route', 'wait', 'BGP routes removed', wait)
luCommand(rtr, 'vtysh -c "show bgp ipv4 uni"', '.', 'none',
'BGP routes post remove')
for rtr in rtrs:
luCommand(rtr, 'ip route show | grep -c \\^10\\.', '^0$', 'wait',
'Linux routes removed', wait)
luCommand(rtr, 'ip route show', '.', 'none',
from lutil import luCommand
rtrs = ['ce1', 'ce2', 'ce3', 'r1', 'r2', 'r3', 'r4']
for rtr in rtrs:
ret = luCommand(rtr, 'vtysh -c "show bgp neigh"',
'Notification received .([A-Za-z0-9/ ]*)', 'none',
'collect neighbor stats')
found = luLast()
if ret != False and found != None:
val = found.group(1)
ret = luCommand(rtr, 'vtysh -c "show bgp neigh"',
'Notification received', 'fail',
'Notify RXed! {}'.format(val))
#done
from lutil import luCommand
luCommand('r2', 'vtysh -c "show bgp summary"', ' 00:0.* 00:0.* 00:0', 'wait',
'Core adjacencies up', 90)
luCommand('r1', 'vtysh -c "show bgp summary"', ' 00:0', 'pass',
'Core adjacencies up')
luCommand('r3', 'vtysh -c "show bgp summary"', ' 00:0', 'pass',
'Core adjacencies up')
luCommand('r4', 'vtysh -c "show bgp summary"', ' 00:0', 'pass',
'Core adjacencies up')
luCommand('ce1', 'vtysh -c "show bgp summary"', ' 00:0', 'wait',
'Adjacencies up', 90)
luCommand('ce2', 'vtysh -c "show bgp summary"', ' 00:0', 'wait',
'Adjacencies up')
luCommand('ce3', 'vtysh -c "show bgp summary"', ' 00:0', 'wait',
'Adjacencies up')
luCommand('r1', 'vtysh -c "show bgp vrf all summary"', ' 00:0.* 00:0', 'pass',
'All adjacencies up')
luCommand('r3', 'vtysh -c "show bgp vrf all summary"', ' 00:0.* 00:0', 'pass',
'All adjacencies up')
luCommand('r4', 'vtysh -c "show bgp vrf all summary"', ' 00:0.* 00:0', 'pass',
'All adjacencies up')
from lutil import luCommand
luCommand('r1', 'vtysh -c "clear vrf r1-cust1 prefix 99.0.0.1/32"', '.',
'none', 'Cleared VRF route')
luCommand('r3', 'vtysh -c "clear vrf r3-cust1 prefix 99.0.0.2/32"', '.',
'none', 'Cleared VRF route')
luCommand('r4', 'vtysh -c "clear vrf r3-cust1 prefix 99.0.0.3/32"', '.',
'none', 'Cleared VRF route')
luCommand('r1', 'vtysh -c "show vnc registrations local"', '99.0.0.1', 'fail',
'Local Registration cleared')
luCommand('r3', 'vtysh -c "show vnc registrations local"', '99.0.0.2', 'fail',
'Local Registration cleared')
luCommand('r4', 'vtysh -c "show vnc registrations local"', '99.0.0.3', 'fail',
'Local Registration cleared')
luCommand('r1', 'vtysh -c "show bgp ipv4 uni"', '2 routes and 2', 'wait',
'Unicast SAFI updated', 10)
luCommand('r2', 'vtysh -c "show bgp ipv4 uni"', 'No BGP prefixes displayed',
'pass', 'Unicast SAFI')
luCommand('r3', 'vtysh -c "show bgp ipv4 uni"', '2 routes and 2', 'wait',
'Unicast SAFI updated', 10)
luCommand('r4', 'vtysh -c "show bgp ipv4 uni"', '2 routes and 2', 'wait',
'Unicast SAFI updated', 10)
luCommand('ce1', 'vtysh -c "show bgp ipv4 uni"', '2 routes and 2', 'wait',
'Local and remote routes', 10)
luCommand('ce2', 'vtysh -c "show bgp ipv4 uni"', '2 routes and 2', 'wait',
'Local and remote routes', 10)
luCommand('ce3', 'vtysh -c "show bgp ipv4 uni"', '2 routes and 2', 'wait',
'Local and remote routes', 10)
luCommand('r1', 'vtysh -c "show vnc registrations remote"', 'Prefix ', 'fail',
'Remote Registration cleared')
luCommand('r3', 'vtysh -c "show vnc registrations remote"', 'Prefix ', 'fail',
'Remote Registration cleared')
{'p':'99.0.0.3/32', 'n':'192.168.1.2'},
]
bgpribRequireUnicastRoutes('r4','ipv4','r4-cust1','Customer 1 routes in r4 vrf',want_r4_cust1_routes)
want_r4_cust2_routes = [
{'p':'5.4.2.0/24', 'n':'99.0.0.4'},
{'p':'5.4.3.0/24', 'n':'99.0.0.4'},
{'p':'99.0.0.4/32', 'n':'192.168.2.2'},
]
bgpribRequireUnicastRoutes('r4','ipv4','r4-cust2','Customer 2 routes in r4 vrf',want_r4_cust2_routes)
########################################################################
# PE routers: core unicast routes are empty
########################################################################
luCommand('r1','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Core Unicast SAFI clean')
luCommand('r2','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Core Unicast SAFI clean')
luCommand('r3','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Core Unicast SAFI clean')
luCommand('r4','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Core Unicast SAFI clean')
########################################################################
# PE routers: local ce-originated routes are leaked to vpn
########################################################################
# nhzero is for the new code that sets nh of locally-leaked routes to 0
#nhzero = 1
nhzero = 0
if nhzero:
luCommand('r1','vtysh -c "show bgp ipv4 vpn"',
'Distinguisher: *10:1.*5.1.0.0/24 *0.0.0.0 .*5.1.1.0/24 *0.0.0.0 .*99.0.0.1/32 *0.0.0.0 ',
from lutil import luCommand
holddownFactorSet = luCommand('r1','vtysh -c "show running"','rfp holddown-factor','none','Holddown factor set')
luCommand('r1','vtysh -c "show vnc registrations"','.','none')
luCommand('r3','vtysh -c "show vnc registrations"','.','none')
luCommand('r4','vtysh -c "show vnc registrations"','.','none')
if not holddownFactorSet:
luCommand('r1','vtysh -c "show vnc summary"','.','pass','Holddown factor not set -- skipping test')
else:
#holddown time test
luCommand('r1','vtysh -c "debug rfapi-dev register vn 10.0.0.1 un 1.1.1.1 prefix 1.111.0.0/16 lifetime 10"','', 'none', 'Prefix registered')
luCommand('r1','vtysh -c "show vnc registrations local"','1.111.0.0/16','wait','Local registration')
luCommand('r3','vtysh -c "debug rfapi-dev register vn 10.0.0.2 un 2.2.2.2 prefix 1.222.0.0/16 lifetime 10"','', 'none', 'Prefix registered')
luCommand('r3','vtysh -c "show vnc registrations local"','1.222.0.0/16','wait','Local registration')
luCommand('r4','vtysh -c "show vnc registrations"','Remotely: *Active: 4 ','wait', 'See registrations, L=10')
luCommand('r4','vtysh -c "debug rfapi-dev register vn 10.0.0.3 un 3.3.3.3 prefix 1.222.0.0/16 lifetime 5 cost 50"','', 'none', 'MP Prefix registered')
luCommand('r4','vtysh -c "show vnc registrations local"','1.222.0.0/16','wait','Local registration (MP prefix)')
luCommand('r1','vtysh -c "show vnc registrations"','.','none')
luCommand('r3','vtysh -c "show vnc registrations"','.','none')
luCommand('r4','vtysh -c "debug rfapi-dev query vn 10.0.0.3 un 3.3.3.3 target 1.111.111.111"','pfx=', 'pass', 'Query R1s info')
luCommand('r4','vtysh -c "debug rfapi-dev query vn 10.0.0.3 un 3.3.3.3 target 1.222.222.222"','1.222.0.0/16.*1.222.0.0/16', 'pass', 'Query R3s+R4s info')
luCommand('r4','vtysh -c "debug rfapi-dev unregister vn 10.0.0.3 un 3.3.3.3 prefix 1.222.0.0/16"','', 'none', 'MP Prefix removed')
luCommand('r4','vtysh -c "show vnc registrations"','In Holddown: *Active: 1 ','wait', 'MP prefix in holddown')
luCommand('r1','vtysh -c "show vnc registrations"','In Holddown: *Active: 1 ','wait', 'MP prefix in holddown')
luCommand('r3','vtysh -c "show vnc registrations"','In Holddown: *Active: 1 ','wait', 'MP prefix in holddown')
luCommand('r1','vtysh -c "debug rfapi-dev query vn 10.0.0.1 un 1.1.1.1 target 1.222.222.222"','1.222.0.0/16', 'pass', 'Query R3s info')
c = int(r / 256)
if c > 0:
d = r - c * 256 - 1
else:
d = r
wait = 2 * num / 1000
mem_z = {}
mem_b = {}
rtrs = ["ce1", "ce2", "ce3", "r1", "r2", "r3", "r4"]
for rtr in rtrs:
mem_z[rtr] = {"value": 0, "units": "unknown"}
mem_b[rtr] = {"value": 0, "units": "unknown"}
ret = luCommand(
rtr,
'vtysh -c "show memory"',
"zebra: System allocator statistics: Total heap allocated: *(\d*) ([A-Za-z]*) .*bgpd: System allocator statistics: Total heap allocated: *(\d*) ([A-Za-z]*)",
"none",
"collect bgpd memory stats",
)
found = luLast()
if ret != False and found != None:
mem_z[rtr] = {"value": int(found.group(1)), "units": found.group(2)}
mem_b[rtr] = {"value": int(found.group(3)), "units": found.group(4)}
luCommand("ce1", 'vtysh -c "show mem"', "qmem sharpd", "none",
"check if sharpd running")
doSharp = False
found = luLast()
if ret != False and found != None:
if len(found.group()):
doSharp = True
from lutil import luCommand, luLast
from lib import topotest
ret = luCommand('r2', 'ip -M route show',
'\d*(?= via inet 10.0.2.4 dev r2-eth1)','wait','See mpls route to r4')
found = luLast()
if ret != False and found != None:
label4r4 = found.group(0)
luCommand('r2', 'ip -M route show',
'.', 'pass',
'See %s as label to r4' % label4r4)
ret = luCommand('r2', 'ip -M route show',
'\d*(?= via inet 10.0.1.1 dev r2-eth0)', 'wait',
'See mpls route to r1')
found = luLast()
if ret != False and found != None:
label4r1 = found.group(0)
luCommand('r2', 'ip -M route show',
'.', 'pass', 'See %s as label to r1' % label4r1)
luCommand('r1', 'ip route show vrf r1-cust1',
'99.0.0.4', 'pass', 'VRF->MPLS PHP route installed')
luCommand('r4', 'ip route show vrf r4-cust2',
'99.0.0.1','pass', 'VRF->MPLS PHP route installed')
luCommand('r1', 'ip -M route show', '101', 'pass', 'MPLS->VRF route installed')
luCommand('r4', 'ip -M route show', '1041', 'pass', 'MPLS->VRF1 route installed')
luCommand('r4', 'ip -M route show', '1042', 'pass', 'MPLS->VRF2 route installed')
from lutil import luCommand
luCommand('r1','vtysh -c "debug rfapi-dev unregister vn 10.0.0.1 un 1.1.1.1 prefix 11.11.11.0/24"','', 'none', 'Prefix removed')
luCommand('r1','vtysh -c "show vnc registrations"','Locally: *Active: 0 ','wait','Local registration removed')
luCommand('r1','vtysh -c "debug rfapi-dev close vn 10.0.0.1 un 1.1.1.1"','status 0', 'pass', 'Closed RFAPI')
luCommand('r3','vtysh -c "debug rfapi-dev unregister vn 10.0.0.2 un 2.2.2.2 prefix 22.22.22.0/24"','', 'none', 'Prefix removed')
luCommand('r3','vtysh -c "show vnc registrations"','Locally: *Active: 0 ','wait','Local registration removed')
luCommand('r3','vtysh -c "debug rfapi-dev close vn 10.0.0.2 un 2.2.2.2"','status 0', 'pass', 'Closed RFAPI')
luCommand('r4','vtysh -c "debug rfapi-dev unregister vn 10.0.0.3 un 3.3.3.3 prefix 33.33.33.0/24"','', 'none', 'Prefix removed')
luCommand('r4','vtysh -c "debug rfapi-dev unregister vn 10.0.0.3 un 3.3.3.3 prefix 11.11.11.0/24"','', 'none', 'MP prefix removed')
luCommand('r4','vtysh -c "show vnc registrations"','Locally: *Active: 0 ','wait','Local registration removed')
#luCommand('r4','vtysh -c "debug rfapi-dev close vn 10.0.0.3 un 3.3.3.3"','status 0', 'pass', 'Closed RFAPI')
luCommand('r4','vtysh -c "clear vnc nve *"','.', 'pass', 'Cleared NVEs')
luCommand('r1','vtysh -c "show vnc registrations"','Locally: *Active: 0 .* Remotely: *Active: 0','wait','All registrations cleared')
luCommand('r3','vtysh -c "show vnc registrations"','Locally: *Active: 0 .* Remotely: *Active: 0','wait','All registrations cleared')
luCommand('r4','vtysh -c "show vnc registrations"','Locally: *Active: 0 .* Remotely: *Active: 0','wait','All registrations cleared')
num = '0 exist'
luCommand('r1','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI clear')
luCommand('r2','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI clear')
luCommand('r3','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI clear')
luCommand('r4','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI clear')
luCommand('r1','vtysh -c "show vnc registrations"','Locally: *Active: 0 .* Remotely: *Active: 0 .*In Holddown: *Active: 0','wait','No holddowns',20)
luCommand('r3','vtysh -c "show vnc registrations"','Locally: *Active: 0 .* Remotely: *Active: 0 .*In Holddown: *Active: 0','wait','No holddowns')
luCommand('r4','vtysh -c "show vnc registrations"','Locally: *Active: 0 .* Remotely: *Active: 0 .*In Holddown: *Active: 0','wait','No holddowns')
luCommand('r1','vtysh -c "show vnc summary"','.','none')
luCommand('r3','vtysh -c "show vnc summary"','.','none')
from lutil import luCommand
luCommand('r1','vtysh -c "clear vrf cust1 prefix 99.0.0.1/32"','.','none','Cleared VRF route')
luCommand('r3','vtysh -c "clear vrf cust1 prefix 99.0.0.2/32"','.','none','Cleared VRF route')
luCommand('r4','vtysh -c "clear vrf cust1 prefix 99.0.0.3/32"','.','none','Cleared VRF route')
luCommand('r1','vtysh -c "show vnc registrations local"','99.0.0.1','fail','Local Registration cleared')
luCommand('r3','vtysh -c "show vnc registrations local"','99.0.0.2','fail','Local Registration cleared')
luCommand('r4','vtysh -c "show vnc registrations local"','99.0.0.3','fail','Local Registration cleared')
luCommand('r1','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Unicast SAFI updated')
luCommand('r2','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Unicast SAFI')
luCommand('r3','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Unicast SAFI updated')
luCommand('r4','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Unicast SAFI updated')
luCommand('ce1','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Local and remote routes')
luCommand('ce2','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Local and remote routes')
luCommand('ce3','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Local and remote routes')
luCommand('r1','vtysh -c "show vnc registrations remote"','Prefix ','fail','Remote Registration cleared')
luCommand('r3','vtysh -c "show vnc registrations remote"','Prefix ','fail','Remote Registration cleared')
luCommand('r4','vtysh -c "show vnc registrations remote"','Prefix ','fail','Remote Registration cleared')
from lutil import luCommand
rtrs = ['r1', 'r3', 'r4']
for rtr in rtrs:
luCommand(rtr, 'ip link show type vrf {}-cust1'.format(rtr),'cust1: .*UP,LOWER_UP','pass','VRF cust1 up')
luCommand(rtr, 'ip add show vrf {}-cust1'.format(rtr),'r..eth4: .*UP,LOWER_UP.* 192.168','pass','VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf {}-cust1'.format(rtr),'192.168...0/24 dev r.-eth','pass','VRF cust1 interface route')
luCommand('r4', 'ip link show type vrf r4-cust2','cust2: .*UP,LOWER_UP','pass','VRF cust2 up')
luCommand('r4', 'ip add show vrf r4-cust2','r..eth5.*UP,LOWER_UP.* 192.168','pass','VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf r4-cust2'.format(rtr),'192.168...0/24 dev r.-eth','pass','VRF cust2 interface route')
rtrs = ['ce1', 'ce2', 'ce3']
for rtr in rtrs:
luCommand(rtr, 'ip route show','192.168...0/24 dev ce.-eth0','pass','CE interface route')
luCommand(rtr,'ping 192.168.1.1 -c 1',' 0. packet loss','wait','CE->PE ping')
luCommand('ce4','ping 192.168.2.1 -c 1',' 0. packet loss','wait','CE4->PE4 ping')
from lutil import luCommand, luLast
from lib import topotest
ret = luCommand('r2', 'ip -M route show',
'\d*(?= via inet 10.0.2.4 dev r2-eth1)', 'wait',
'See mpls route to r4')
found = luLast()
if ret != False and found != None:
label4r4 = found.group(0)
luCommand('r2', 'ip -M route show', '.', 'pass',
'See %s as label to r4' % label4r4)
ret = luCommand('r2', 'ip -M route show',
'\d*(?= via inet 10.0.1.1 dev r2-eth0)', 'wait',
'See mpls route to r1')
found = luLast()
if ret != False and found != None:
label4r1 = found.group(0)
luCommand('r2', 'ip -M route show', '.', 'pass',
'See %s as label to r1' % label4r1)
luCommand('ce4', 'ip route add default via 192.168.2.1')
luCommand('ce1', 'ip route add default via 192.168.1.1')
luCommand(
'r1', 'ip route add 99.0.0.1 vrf r1-cust1 dev r1-eth4 via 192.168.1.2')
luCommand(
'r4', 'ip route add 99.0.0.4 vrf r4-cust2 dev r4-eth4 via 192.168.2.2')
# luCommand('r1','ip -M route add 101 dev r1-cust1')
# luCommand('r4','ip -M route add 104 dev r4-cust2')
# luCommand('r1','ip route add 99.0.0.4/32 vrf r1-cust1 nexthop encap mpls %s/104 via 10.0.1.2 dev r1-eth0'%label4r4)
# luCommand('r4','ip route add 99.0.0.1/32 vrf r4-cust2 nexthop encap mpls %s/101 via 10.0.2.2 dev r4-eth0'%label4r1)
from lutil import luCommand
from customize import l3mdev_accept
l3mdev_rtrs = ['r1', 'r3', 'r4', 'ce4']
for rtr in l3mdev_rtrs:
luCommand(rtr,'sysctl net.ipv4.tcp_l3mdev_accept',' = \d*','none','')
found = luLast()
luCommand(rtr,'ss -naep',':179','pass','IPv4:bgp, l3mdev{}'.format(found.group(0)))
luCommand(rtr,'ss -naep',':.*:179','pass','IPv6:bgp')
luCommand(rtr,'sysctl net.ipv4.tcp_l3mdev_accept',' = {}'.format(l3mdev_accept),'pass','l3mdev matches expected (real/expected{}/{})'.format(found.group(0),l3mdev_accept))
rtrs = ['r1', 'r3', 'r4']
for rtr in rtrs:
luCommand(rtr, 'ip link show type vrf {}-cust1'.format(rtr),'cust1: .*UP,LOWER_UP','pass','VRF cust1 up')
luCommand(rtr, 'ip add show vrf {}-cust1'.format(rtr),'r..eth4: .*UP,LOWER_UP.* 192.168','pass','VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf {}-cust1'.format(rtr),'192.168...0/24 dev r.-eth','pass','VRF cust1 interface route')
luCommand('r4', 'ip link show type vrf r4-cust2','cust2: .*UP,LOWER_UP','pass','VRF cust2 up')
luCommand('r4', 'ip add show vrf r4-cust2','r..eth5.*UP,LOWER_UP.* 192.168','pass','VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf r4-cust2'.format(rtr),'192.168...0/24 dev r.-eth','pass','VRF cust2 interface route')
rtrs = ['ce1', 'ce2', 'ce3']
for rtr in rtrs:
luCommand(rtr, 'ip route show','192.168...0/24 dev ce.-eth0','pass','CE interface route')
luCommand(rtr,'ping 192.168.1.1 -c 1',' 0. packet loss','wait','CE->PE ping')
luCommand('ce4', 'ip link show type vrf ce4-cust2','cust2: .*UP,LOWER_UP','pass','VRF cust2 up')
luCommand('ce4', 'ip route show vrf ce4-cust2','192.168...0/24 dev ce.-eth0','pass','CE interface route')
luCommand('ce4','ping 192.168.2.1 -c 1 -I ce4-cust2',' 0. packet loss','wait','CE4->PE4 ping')
from lutil import luCommand
from customize import l3mdev_accept
l3mdev_rtrs = ['r1', 'r3', 'r4', 'ce4']
for rtr in l3mdev_rtrs:
luCommand(rtr, 'sysctl net.ipv4.tcp_l3mdev_accept', ' = \d*', 'none', '')
found = luLast()
luCommand(rtr, 'ss -naep', ':179', 'pass',
'IPv4:bgp, l3mdev{}'.format(found.group(0)))
luCommand(rtr, 'ss -naep', ':.*:179', 'pass', 'IPv6:bgp')
luCommand(
rtr, 'sysctl net.ipv4.tcp_l3mdev_accept',
' = {}'.format(l3mdev_accept), 'pass',
'l3mdev matches expected (real/expected{}/{})'.format(
found.group(0), l3mdev_accept))
rtrs = ['r1', 'r3', 'r4']
for rtr in rtrs:
luCommand(rtr, 'ip link show type vrf {}-cust1'.format(rtr), 'cust1: .*UP',
'pass', 'VRF cust1 intf up')
luCommand(rtr, 'ip add show vrf {}-cust1'.format(rtr), 'r..eth4.*UP',
'pass', 'VRF cust1 IP intf up')
luCommand(rtr, 'ip add show vrf {}-cust1'.format(rtr), '192.168', 'pass',
'VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf {}-cust1'.format(rtr),
'192.168...0/24 dev r.-eth', 'pass', 'VRF cust1 interface route')
luCommand('r4', 'ip link show type vrf r4-cust2', 'cust2: .*UP', 'pass',
'VRF cust2 up')
luCommand('r4', 'ip add show vrf r4-cust2', 'r..eth5.*UP.* 192.168', 'pass',
'VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf r4-cust2'.format(rtr),
b = int(num/(256*256))
if b > 0:
r = num - b * (256*256)
else:
r = num
c = int(r/256)
if c > 0:
d = r - c * 256 - 1
else:
d = r
wait = num/1000
mem = {}
rtrs = ['ce1', 'ce2', 'ce3', 'r1', 'r2', 'r3', 'r4']
for rtr in rtrs:
mem[rtr] = {'value': 0, 'units': 'unknown'}
ret = luCommand(rtr, 'vtysh -c "show memory"', 'bgpd: System allocator statistics: Total heap allocated: *(\d*) ([A-Za-z]*)', 'none', 'collect bgpd memory stats')
found = luLast()
if ret != False and found != None:
mem[rtr] = {'value': int(found.group(1)), 'units': found.group(2)}
luCommand('ce1', 'vtysh -c "sharp data nexthop"', 'sharpd is not running', 'none','check if sharpd running')
doSharp = True
found = luLast()
if ret != False and found != None:
if len(found.group()):
luCommand('ce1', 'vtysh -c "sharp data nexthop"', 'sharpd is not running', 'pass','sharpd NOT running, skipping test')
doSharp = False
if doSharp == True:
luCommand('ce1', 'vtysh -c "sharp install routes 10.0.0.0 nexthop 99.0.0.1 {}"'.format(num),'','pass','Adding {} routes'.format(num))
luCommand('ce2', 'vtysh -c "sharp install routes 10.0.0.0 nexthop 99.0.0.2 {}"'.format(num),'','pass','Adding {} routes'.format(num))
{
"p": "99.0.0.4/32",
"n": "192.168.2.2"
},
]
bgpribRequireUnicastRoutes("r4", "ipv4", "r4-cust2",
"Customer 2 routes in r4 vrf", want_r4_cust2_routes)
########################################################################
# PE routers: core unicast routes are empty
########################################################################
luCommand(
"r1",
'vtysh -c "show bgp ipv4 uni"',
"No BGP prefixes displayed",
"pass",
"Core Unicast SAFI clean",
)
luCommand(
"r2",
'vtysh -c "show bgp ipv4 uni"',
"No BGP prefixes displayed",
"pass",
"Core Unicast SAFI clean",
)
luCommand(
"r3",
'vtysh -c "show bgp ipv4 uni"',
"No BGP prefixes displayed",
"pass",
from lutil import luCommand
rtrs = ['r1', 'r3', 'r4', 'ce1', 'ce2', 'ce3', 'ce4']
for rtr in rtrs:
luCommand(rtr,'sysctl net.ipv4.tcp_l3mdev_accept',' = \d*','none','')
found = luLast()
luCommand(rtr,'ss -aep',':bgp','pass','IPv4:bgp, l3mdev%s' % found.group(0))
luCommand(rtr,'ss -aep',':.:bgp','pass','IPv6:bgp')
rtrs = ['r1', 'r3', 'r4']
for rtr in rtrs:
luCommand(rtr, 'ip link show type vrf {}-cust1'.format(rtr),'cust1: .*UP,LOWER_UP','pass','VRF cust1 up')
luCommand(rtr, 'ip add show vrf {}-cust1'.format(rtr),'r..eth4: .*UP,LOWER_UP.* 192.168','pass','VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf {}-cust1'.format(rtr),'192.168...0/24 dev r.-eth','pass','VRF cust1 interface route')
luCommand('r4', 'ip link show type vrf r4-cust2','cust2: .*UP,LOWER_UP','pass','VRF cust2 up')
luCommand('r4', 'ip add show vrf r4-cust2','r..eth5.*UP,LOWER_UP.* 192.168','pass','VRF cust1 IP config')
luCommand(rtr, 'ip route show vrf r4-cust2'.format(rtr),'192.168...0/24 dev r.-eth','pass','VRF cust2 interface route')
rtrs = ['ce1', 'ce2', 'ce3']
for rtr in rtrs:
luCommand(rtr, 'ip route show','192.168...0/24 dev ce.-eth0','pass','CE interface route')
luCommand(rtr,'ping 192.168.1.1 -c 1',' 0. packet loss','wait','CE->PE ping')
luCommand('ce4', 'ip link show type vrf ce4-cust2','cust2: .*UP,LOWER_UP','pass','VRF cust2 up')
luCommand('ce4', 'ip route show vrf ce4-cust2','192.168...0/24 dev ce.-eth0','pass','CE interface route')
luCommand('ce4','ping 192.168.2.1 -c 1 -I ce4-cust2',' 0. packet loss','wait','CE4->PE4 ping')
from lutil import luCommand
holddownFactorSet = luCommand(
"r1",
'vtysh -c "show running"',
"rfp holddown-factor",
"none",
"Holddown factor set",
)
if not holddownFactorSet:
to = "-1"
else:
to = "1"
luCommand(
"r1",
'vtysh -c "debug rfapi-dev open vn 20.0.0.1 un 1.1.1.21"',
"rfapi_set_response_cb: status 0",
"pass",
"Opened RFAPI",
)
luCommand(
"r1",
'vtysh -c "debug rfapi-dev register vn 20.0.0.1 un 1.1.1.21 prefix 111.111.111.0/24 lifetime {}"'
.format(to),
"",
"none",
"Prefix registered",
)
luCommand(
"r1",
'vtysh -c "show vnc registrations local"',
from lutil import luCommand
luCommand(
"r1",
'vtysh -c "clear vrf cust1 prefix 99.0.0.1/32"',
".",
"none",
"Cleared VRF route",
)
luCommand(
"r3",
'vtysh -c "clear vrf cust1 prefix 99.0.0.2/32"',
".",
"none",
"Cleared VRF route",
)
luCommand(
"r4",
'vtysh -c "clear vrf cust1 prefix 99.0.0.3/32"',
".",
"none",
"Cleared VRF route",
)
luCommand(
"r1",
'vtysh -c "show vnc registrations local"',
"99.0.0.1",
"fail",
"Local Registration cleared",
)
luCommand(
from lutil import luCommand
holddownFactorSet = luCommand('r1','vtysh -c "show running"','rfp holddown-factor','none','Holddown factor set')
if not holddownFactorSet:
to = "-1"
cost = ""
else:
to = "6"
cost = "cost 50"
luCommand('r1','vtysh -c "debug rfapi-dev open vn 10.0.0.1 un 1.1.1.1"','rfapi_set_response_cb: status 0', 'pass', 'Opened RFAPI')
luCommand('r1','vtysh -c "debug rfapi-dev query vn 10.0.0.1 un 1.1.1.1 target 11.11.11.11"','rc=2', 'pass', 'Clean query')
luCommand('r1','vtysh -c "debug rfapi-dev register vn 10.0.0.1 un 1.1.1.1 prefix 11.11.11.0/24 lifetime {}"'.format(to),'', 'none', 'Prefix registered')
luCommand('r1','vtysh -c "show vnc registrations local"','1 out of 1','wait','Local registration')
luCommand('r1','vtysh -c "debug rfapi-dev response-omit-self off"','.','none')
luCommand('r1','vtysh -c "debug rfapi-dev query vn 10.0.0.1 un 1.1.1.1 target 11.11.11.11"','11.11.11.0/24', 'pass', 'Query self')
luCommand('r3','vtysh -c "debug rfapi-dev open vn 10.0.0.2 un 2.2.2.2"','rfapi_set_response_cb: status 0', 'pass', 'Opened RFAPI')
luCommand('r3','vtysh -c "debug rfapi-dev register vn 10.0.0.2 un 2.2.2.2 prefix 22.22.22.0/24 lifetime {}"'.format(to),'', 'none', 'Prefix registered')
luCommand('r3','vtysh -c "show vnc registrations local"','1 out of 1','wait','Local registration')
luCommand('r3','vtysh -c "debug rfapi-dev response-omit-self on"','.','none')
luCommand('r3','vtysh -c "debug rfapi-dev query vn 10.0.0.2 un 2.2.2.2 target 22.22.22.22"','rc=2', 'pass', 'Self excluded')
luCommand('r3','vtysh -c "debug rfapi-dev open vn 10.0.1.2 un 2.1.1.2"','rfapi_set_response_cb: status 0', 'pass', 'Opened query only RFAPI')
luCommand('r3','vtysh -c "debug rfapi-dev query vn 10.0.1.2 un 2.1.1.2 target 22.22.22.22"','22.22.22.0/24', 'pass', 'See local')
luCommand('r4','vtysh -c "debug rfapi-dev open vn 10.0.0.3 un 3.3.3.3"','rfapi_set_response_cb: status 0', 'pass', 'Opened RFAPI')
luCommand('r4','vtysh -c "debug rfapi-dev register vn 10.0.0.3 un 3.3.3.3 prefix 33.33.33.0/24 lifetime {}"'.format(to),'', 'none', 'Prefix registered')
luCommand('r4','vtysh -c "show vnc registrations local"','1 out of 1','wait','Local registration')
luCommand('r4','vtysh -c "debug rfapi-dev response-omit-self off"','.','none')
luCommand('r4','vtysh -c "debug rfapi-dev query vn 10.0.0.3 un 3.3.3.3 target 33.33.33.33"','33.33.33.0/24', 'pass', 'Query self')
luCommand('r4','vtysh -c "debug rfapi-dev register vn 10.0.0.3 un 3.3.3.3 prefix 11.11.11.0/24 lifetime {} {}"'.format(to, cost),'', 'none', 'MP Prefix registered')
luCommand('r4','vtysh -c "show vnc registrations local"','2 out of 2','wait','Local registration')
if b > 0:
r = num - b * (256 * 256)
else:
r = num
c = int(r / 256)
if c > 0:
d = r - c * 256 - 1
else:
d = r
wait = num / 1000
mem = {}
rtrs = ['ce1', 'ce2', 'ce3', 'r1', 'r2', 'r3', 'r4']
for rtr in rtrs:
mem[rtr] = {'value': 0, 'units': 'unknown'}
ret = luCommand(
rtr, 'vtysh -c "show memory"',
'bgpd: System allocator statistics: Total heap allocated: *(\d*) ([A-Za-z]*)',
'none', 'collect bgpd memory stats')
found = luLast()
if ret != False and found != None:
mem[rtr] = {'value': int(found.group(1)), 'units': found.group(2)}
luCommand('ce1', 'vtysh -c "sharp data nexthop"', 'sharpd is not running',
'none', 'check if sharpd running')
doSharp = True
found = luLast()
if ret != False and found != None:
if len(found.group()):
luCommand('ce1', 'vtysh -c "sharp data nexthop"',
'sharpd is not running', 'pass',
'sharpd NOT running, skipping test')
doSharp = False
from lutil import luCommand, luLast
from lib import topotest
ret = luCommand('r2', 'ip -M route show',
'\d*(?= via inet 10.0.2.4 dev r2-eth1)', 'wait',
'See mpls route to r4')
found = luLast()
if ret != False and found != None:
label4r4 = found.group(0)
luCommand('r2', 'ip -M route show', '.', 'pass',
'See %s as label to r4' % label4r4)
ret = luCommand('r2', 'ip -M route show',
'\d*(?= via inet 10.0.1.1 dev r2-eth0)', 'wait',
'See mpls route to r1')
found = luLast()
if ret != False and found != None:
label4r1 = found.group(0)
luCommand('r2', 'ip -M route show', '.', 'pass',
'See %s as label to r1' % label4r1)
luCommand('r1', 'ip route show vrf r1-cust1', '99.0.0.4', 'pass',
'VRF->MPLS PHP route installed')
luCommand('r4', 'ip route show vrf r4-cust2', '99.0.0.1', 'pass',
'VRF->MPLS PHP route installed')
luCommand('r1', 'ip -M route show', '101', 'pass',
'MPLS->VRF route installed')
luCommand('r4', 'ip -M route show', '1041', 'pass',
'MPLS->VRF1 route installed')
from lutil import luCommand
ret = luCommand(
"ce1",
'vtysh -c "show ip route" | grep -c \\ 10\\.\\*/32',
"(.*)",
"pass",
"Looking for sharp routes",
)
found = luLast()
if ret != False and found != None:
num = int(found.group())
luCommand(
"ce3", 'vtysh -c "show bgp sum"', ".", "pass", "See %s sharp routes" % num
)
if num > 0:
rtrs = ["ce1", "ce2", "ce3"]
for rtr in rtrs:
luCommand(
rtr,
'vtysh -c "show bgp ipv4 uni" | grep Display',
".",
"none",
"BGP routes pre remove",
)
luCommand(
rtr,
"ip route show | cat -n | tail",
".",
"none",
"Linux routes pre remove",
from lutil import luCommand
luCommand('ce1', 'vtysh -c "show bgp ipv4 uni"', '7 routes and 7', 'wait',
'Local and remote routes')
luCommand('ce2', 'vtysh -c "show bgp ipv4 uni"', '7 routes and 9', 'wait',
'Local and remote routes')
luCommand('ce3', 'vtysh -c "show bgp ipv4 uni"', '7 routes and 7', 'wait',
'Local and remote routes')
luCommand('r1', 'vtysh -c "show bgp ipv4 uni"', '7 routes and 9', 'pass',
'Unicast SAFI')
luCommand('r2', 'vtysh -c "show bgp ipv4 uni"', 'No BGP prefixes displayed',
'pass', 'Unicast SAFI')
luCommand('r3', 'vtysh -c "show bgp ipv4 uni"', '7 routes and 9', 'pass',
'Unicast SAFI')
luCommand('r4', 'vtysh -c "show bgp ipv4 uni"', '7 routes and 9', 'pass',
'Unicast SAFI')
have2ndImports = luCommand('r3', 'vtysh -c "show vnc registrations imported"',
'2 out of 2 imported', 'none',
'Imported Registrations', 2)
if have2ndImports:
num = '9 routes and 9'
else:
num = '7 routes and 7'
luCommand('r1', 'vtysh -c "show bgp ipv4 vpn"', num, 'pass', 'VPN SAFI')
luCommand('r2', 'vtysh -c "show bgp ipv4 vpn"', num, 'pass', 'VPN SAFI')
luCommand('r3', 'vtysh -c "show bgp ipv4 vpn"', num, 'pass', 'VPN SAFI')
luCommand('r4', 'vtysh -c "show bgp ipv4 vpn"', num, 'pass', 'VPN SAFI')
from lutil import luCommand
luCommand(
'r1',
'vtysh -c "debug rfapi-dev unregister vn 10.0.0.1 un 1.1.1.1 prefix 11.11.11.0/24"',
'', 'none', 'Prefix removed')
luCommand('r1', 'vtysh -c "show vnc registrations"', 'Locally: *Active: 0 ',
'wait', 'Local registration removed')
luCommand('r1', 'vtysh -c "debug rfapi-dev close vn 10.0.0.1 un 1.1.1.1"',
'status 0', 'pass', 'Closed RFAPI')
luCommand(
'r3',
'vtysh -c "debug rfapi-dev unregister vn 10.0.0.2 un 2.2.2.2 prefix 22.22.22.0/24"',
'', 'none', 'Prefix removed')
luCommand('r3', 'vtysh -c "show vnc registrations"', 'Locally: *Active: 0 ',
'wait', 'Local registration removed')
luCommand('r3', 'vtysh -c "debug rfapi-dev close vn 10.0.0.2 un 2.2.2.2"',
'status 0', 'pass', 'Closed RFAPI')
luCommand(
'r4',
'vtysh -c "debug rfapi-dev unregister vn 10.0.0.3 un 3.3.3.3 prefix 33.33.33.0/24"',
'', 'none', 'Prefix removed')
luCommand(
'r4',
'vtysh -c "debug rfapi-dev unregister vn 10.0.0.3 un 3.3.3.3 prefix 11.11.11.0/24"',
'', 'none', 'MP prefix removed')
luCommand('r4', 'vtysh -c "show vnc registrations"', 'Locally: *Active: 0 ',
'wait', 'Local registration removed')
luCommand('r4', 'vtysh -c "debug rfapi-dev close vn 10.0.0.3 un 3.3.3.3"',
from lutil import luCommand
luCommand('ce1','vtysh -c "show bgp ipv4 uni"','7 routes and 7','wait','Local and remote routes')
luCommand('ce2','vtysh -c "show bgp ipv4 uni"','7 routes and 9','wait','Local and remote routes')
luCommand('ce3','vtysh -c "show bgp ipv4 uni"','7 routes and 7','wait','Local and remote routes')
luCommand('r1','vtysh -c "show bgp ipv4 uni"','7 routes and 9','pass','Unicast SAFI')
luCommand('r2','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Unicast SAFI')
luCommand('r3','vtysh -c "show bgp ipv4 uni"','7 routes and 9','pass','Unicast SAFI')
luCommand('r4','vtysh -c "show bgp ipv4 uni"','7 routes and 9','pass','Unicast SAFI')
have2ndImports = luCommand('r3','vtysh -c "show vnc registrations imported"','2 out of 2 imported','none','Imported Registrations',2)
if have2ndImports:
num = '9 routes and 9'
else:
num = '7 routes and 7'
luCommand('r1','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI')
luCommand('r2','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI')
luCommand('r3','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI')
luCommand('r4','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI')
from lutil import luCommand
holddownFactorSet = luCommand(
"r1",
'vtysh -c "show running"',
"rfp holddown-factor",
"none",
"Holddown factor set",
)
luCommand("r1", 'vtysh -c "show vnc registrations"', ".", "none")
luCommand("r3", 'vtysh -c "show vnc registrations"', ".", "none")
luCommand("r4", 'vtysh -c "show vnc registrations"', ".", "none")
if not holddownFactorSet:
luCommand(
"r1",
'vtysh -c "show vnc summary"',
".",
"pass",
"Holddown factor not set -- skipping test",
)
else:
# holddown time test
luCommand(
"r1",
'vtysh -c "debug rfapi-dev register vn 10.0.0.1 un 1.1.1.1 prefix 1.111.0.0/16 lifetime 10"',
"",
"none",
"Prefix registered",
)
luCommand(
"r1",
from lutil import luCommand
luCommand(
"ce1",
'vtysh -c "show bgp ipv4 uni"',
"7 routes and 7",
"wait",
"Local and remote routes",
)
luCommand(
"ce2",
'vtysh -c "show bgp ipv4 uni"',
"7 routes and 9",
"wait",
"Local and remote routes",
)
luCommand(
"ce3",
'vtysh -c "show bgp ipv4 uni"',
"7 routes and 7",
"wait",
"Local and remote routes",
)
luCommand(
"r1", 'vtysh -c "show bgp ipv4 uni"', "7 routes and 9", "pass", "Unicast SAFI"
)
luCommand(
"r2",
'vtysh -c "show bgp ipv4 uni"',
"No BGP prefixes displayed",
"pass",
from lutil import luCommand
luCommand(
"r1", 'vtysh -c "show bgp next"', "99.0.0.. valid", "wait", "See CE static NH"
)
luCommand(
"r3", 'vtysh -c "show bgp next"', "99.0.0.. valid", "wait", "See CE static NH"
)
luCommand(
"r4", 'vtysh -c "show bgp next"', "99.0.0.. valid", "wait", "See CE static NH"
)
luCommand("r1", 'vtysh -c "show bgp ipv4 uni"', "i5.*i5", "wait", "See CE routes")
luCommand("r3", 'vtysh -c "show bgp ipv4 uni"', "i5.*i5", "wait", "See CE routes")
luCommand("r4", 'vtysh -c "show bgp ipv4 uni"', "i5.*i5", "wait", "See CE routes")
luCommand("ce1", 'vtysh -c "show bgp ipv4 uni 5.1.0.0/24"', "", "none", "See CE routes")
luCommand("r1", 'vtysh -c "show bgp ipv4 uni 5.1.0.0/24"', "", "none", "See CE routes")
luCommand("ce2", 'vtysh -c "show bgp ipv4 uni 5.1.0.0/24"', "", "none", "See CE routes")
luCommand("r3", 'vtysh -c "show bgp ipv4 uni 5.1.0.0/24"', "", "none", "See CE routes")
luCommand("ce3", 'vtysh -c "show bgp ipv4 uni 5.1.2.0/24"', "", "none", "See CE routes")
luCommand("r4", 'vtysh -c "show bgp ipv4 uni 5.1.2.0/24"', "", "none", "See CE routes")
luCommand(
"r1", 'vtysh -c "add vrf cust1 prefix 99.0.0.1/32"', ".", "none", "IP Address"
)
luCommand(
"r1",
'vtysh -c "show vnc registrations local"',
"99.0.0.1",
"wait",
"Local Registration",
)
from lutil import luCommand
luCommand('ce1','vtysh -c "show bgp summary"',' 00:0','wait','Adjacencies up',180)
luCommand('ce2','vtysh -c "show bgp summary"',' 00:0','wait','Adjacencies up')
luCommand('ce3','vtysh -c "show bgp summary"',' 00:0','wait','Adjacencies up')
luCommand('ce4','vtysh -c "show bgp vrf all summary"',' 00:0','wait','Adjacencies up',180)
luCommand('r1','ping 2.2.2.2 -c 1',' 0. packet loss','wait','PE->P2 (loopback) ping',60)
luCommand('r3','ping 2.2.2.2 -c 1',' 0. packet loss','wait','PE->P2 (loopback) ping',60)
luCommand('r4','ping 2.2.2.2 -c 1',' 0. packet loss','wait','PE->P2 (loopback) ping',60)
luCommand('r2','vtysh -c "show bgp summary"',' 00:0.* 00:0.* 00:0','wait','Core adjacencies up',300)
luCommand('r1','vtysh -c "show bgp summary"',' 00:0','pass','Core adjacencies up')
luCommand('r3','vtysh -c "show bgp summary"',' 00:0','pass','Core adjacencies up')
luCommand('r4','vtysh -c "show bgp summary"',' 00:0','pass','Core adjacencies up')
luCommand('r1','vtysh -c "show bgp vrf all summary"',' 00:0.* 00:0','pass','All adjacencies up')
luCommand('r3','vtysh -c "show bgp vrf all summary"',' 00:0.* 00:0','pass','All adjacencies up')
luCommand('r4','vtysh -c "show bgp vrf all summary"',' 00:0.* 00:0.* 00:0','pass','All adjacencies up')
luCommand('r1','ping 3.3.3.3 -c 1',' 0. packet loss','wait','PE->PE3 (loopback) ping')
luCommand('r1','ping 4.4.4.4 -c 1',' 0. packet loss','wait','PE->PE4 (loopback) ping')
luCommand('r4','ping 3.3.3.3 -c 1',' 0. packet loss','wait','PE->PE3 (loopback) ping')
from lutil import luCommand
luCommand('ce1','ping 192.168.1.1 -c 1',' 0. packet loss','pass','CE->PE ping')
luCommand('ce2','ping 192.168.1.1 -c 1',' 0. packet loss','pass','CE->PE ping')
luCommand('ce3','ping 192.168.1.1 -c 1',' 0. packet loss','pass','CE->PE ping')
luCommand('ce1','vtysh -c "show bgp summary"',' 00:0','wait','Adjacencies up',90)
luCommand('ce2','vtysh -c "show bgp summary"',' 00:0','wait','Adjacencies up')
luCommand('ce3','vtysh -c "show bgp summary"',' 00:0','wait','Adjacencies up')
luCommand('r1','ping 2.2.2.2 -c 1',' 0. packet loss','wait','PE->P2 (loopback) ping',60)
luCommand('r3','ping 2.2.2.2 -c 1',' 0. packet loss','wait','PE->P2 (loopback) ping',60)
luCommand('r4','ping 2.2.2.2 -c 1',' 0. packet loss','wait','PE->P2 (loopback) ping',60)
luCommand('r2','vtysh -c "show bgp summary"',' 00:0.* 00:0.* 00:0','wait','Core adjacencies up')
luCommand('r1','vtysh -c "show bgp summary"',' 00:0','pass','Core adjacencies up')
luCommand('r3','vtysh -c "show bgp summary"',' 00:0','pass','Core adjacencies up')
luCommand('r4','vtysh -c "show bgp summary"',' 00:0','pass','Core adjacencies up')
luCommand('r1','vtysh -c "show bgp vrf all summary"',' 00:0.* 00:0','pass','All adjacencies up')
luCommand('r3','vtysh -c "show bgp vrf all summary"',' 00:0.* 00:0','pass','All adjacencies up')
luCommand('r4','vtysh -c "show bgp vrf all summary"',' 00:0.* 00:0','pass','All adjacencies up')
luCommand('r1','ping 3.3.3.3 -c 1',' 0. packet loss','wait','PE->PE3 (loopback) ping')
luCommand('r1','ping 4.4.4.4 -c 1',' 0. packet loss','wait','PE->PE4 (loopback) ping')
luCommand('r4','ping 3.3.3.3 -c 1',' 0. packet loss','wait','PE->PE3 (loopback) ping')
from lutil import luCommand
luCommand('r1','vtysh -c "show bgp ipv4 vpn"','','none','VPN SAFI')
luCommand('r2','vtysh -c "show bgp ipv4 vpn"','','none','VPN SAFI')
luCommand('r3','vtysh -c "show bgp ipv4 vpn"','','none','VPN SAFI')
luCommand('r4','vtysh -c "show bgp ipv4 vpn"','','none','VPN SAFI')
luCommand('r1','vtysh -c "show vnc registrations"','Locally: *Active: 1 .* Remotely: *Active: 3','wait','See all registrations')
luCommand('r3','vtysh -c "show vnc registrations"','Locally: *Active: 1 .* Remotely: *Active: 3','wait','See all registrations')
luCommand('r4','vtysh -c "show vnc registrations"','Locally: *Active: 2 .* Remotely: *Active: 2','wait','See all registrations')
num = '4 routes and 4'
luCommand('r1','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI okay')
luCommand('r2','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI okay')
luCommand('r3','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI okay')
luCommand('r4','vtysh -c "show bgp ipv4 vpn"',num,'pass','VPN SAFI okay')
luCommand('r1','vtysh -c "debug rfapi-dev query vn 10.0.0.1 un 1.1.1.1 target 22.22.22.22"','pfx=', 'pass', 'Query R2s info')
luCommand('r1','vtysh -c "debug rfapi-dev query vn 10.0.0.1 un 1.1.1.1 target 33.33.33.33"','pfx=', 'pass', 'Query R4s info')
luCommand('r3','vtysh -c "debug rfapi-dev query vn 10.0.0.2 un 2.2.2.2 target 11.11.11.11"','11.11.11.0/24.*11.11.11.0/24.*', 'pass', 'Query R1s+R4s info')
luCommand('r3','vtysh -c "debug rfapi-dev query vn 10.0.0.2 un 2.2.2.2 target 33.33.33.33"','pfx=', 'pass', 'Query R4s info')
luCommand('r4','vtysh -c "debug rfapi-dev query vn 10.0.0.3 un 3.3.3.3 target 11.11.11.11"','11.11.11.0/24.*11.11.11.0/24.*', 'pass', 'Query R1s+R4s info')
luCommand('r4','vtysh -c "debug rfapi-dev query vn 10.0.0.3 un 3.3.3.3 target 22.22.22.22"','pfx=', 'pass', 'Query R2s info')
from lutil import luCommand
luCommand("r1", 'vtysh -c "show bgp ipv4 vpn"', "", "none", "VPN SAFI")
luCommand("r2", 'vtysh -c "show bgp ipv4 vpn"', "", "none", "VPN SAFI")
luCommand("r3", 'vtysh -c "show bgp ipv4 vpn"', "", "none", "VPN SAFI")
luCommand("r4", 'vtysh -c "show bgp ipv4 vpn"', "", "none", "VPN SAFI")
luCommand(
"r1",
'vtysh -c "show vnc registrations"',
"Locally: *Active: 1 .* Remotely: *Active: 3",
"wait",
"See all registrations",
)
luCommand(
"r3",
'vtysh -c "show vnc registrations"',
"Locally: *Active: 1 .* Remotely: *Active: 3",
"wait",
"See all registrations",
)
luCommand(
"r4",
'vtysh -c "show vnc registrations"',
"Locally: *Active: 2 .* Remotely: *Active: 2",
"wait",
"See all registrations",
)
num = "4 routes and 4"
luCommand("r1", 'vtysh -c "show bgp ipv4 vpn"', num, "pass", "VPN SAFI okay")
luCommand("r2", 'vtysh -c "show bgp ipv4 vpn"', num, "pass", "VPN SAFI okay")
luCommand("r3", 'vtysh -c "show bgp ipv4 vpn"', num, "pass", "VPN SAFI okay")
from lutil import luCommand
luCommand('r1','vtysh -c "show bgp next"','99.0.0.. valid', 'wait', 'See CE static NH')
luCommand('r3','vtysh -c "show bgp next"','99.0.0.. valid', 'wait', 'See CE static NH')
luCommand('r4','vtysh -c "show bgp next"','99.0.0.. valid', 'wait', 'See CE static NH')
luCommand('r1','vtysh -c "show bgp ipv4 uni"','i5.*i5','wait','See CE routes')
luCommand('r3','vtysh -c "show bgp ipv4 uni"','i5.*i5','wait','See CE routes')
luCommand('r4','vtysh -c "show bgp ipv4 uni"','i5.*i5','wait','See CE routes')
luCommand('ce1','vtysh -c "show bgp ipv4 uni 5.1.0.0/24"','','none','See CE routes')
luCommand('r1','vtysh -c "show bgp ipv4 uni 5.1.0.0/24"','','none','See CE routes')
luCommand('ce2','vtysh -c "show bgp ipv4 uni 5.1.0.0/24"','','none','See CE routes')
luCommand('r3','vtysh -c "show bgp ipv4 uni 5.1.0.0/24"','','none','See CE routes')
luCommand('ce3','vtysh -c "show bgp ipv4 uni 5.1.2.0/24"','','none','See CE routes')
luCommand('r4','vtysh -c "show bgp ipv4 uni 5.1.2.0/24"','','none','See CE routes')
luCommand('r1','vtysh -c "add vrf cust1 prefix 99.0.0.1/32"','.','none','IP Address')
luCommand('r1','vtysh -c "show vnc registrations local"','99.0.0.1','wait','Local Registration')
luCommand('r1','vtysh -c "show vnc registrations imported"','2 out of 2 imported','wait','Imported Registrations')
luCommand('r3','vtysh -c "show bgp ipv4 vpn"','i99.0.0.1/32','wait','See R1s static address')
luCommand('r4','vtysh -c "show bgp ipv4 vpn"','i99.0.0.1/32','wait','See R1s static address')
luCommand('r3','vtysh -c "show bgp ipv4 vpn rd 10:1"','i5.*i5','wait','See R1s imports')
luCommand('r4','vtysh -c "show bgp ipv4 vpn rd 10:1"','i5.*i5','wait','See R1s imports')
luCommand('r3','vtysh -c "add vrf cust1 prefix 99.0.0.2/32"','.','none','IP Address')
luCommand('r3','vtysh -c "show vnc registrations local"','99.0.0.2','wait','Local Registration')
have2ndImports = luCommand('r3','vtysh -c "show vnc registrations imported"','2 out of 2 imported','none','Imported Registrations',2)
if have2ndImports:
luCommand('r3','vtysh -c "show vnc registrations imported"','2 out of 2 imported','pass','Imported Registrations')
luCommand('r1','vtysh -c "show bgp ipv4 vpn"','i99.0.0.2/32','wait','See R3s static address')
luCommand('r4','vtysh -c "show bgp ipv4 vpn"','i99.0.0.2/32','wait','See R3s static address')
if have2ndImports:
luCommand('r1','vtysh -c "show bgp ipv4 vpn rd 10:3"','i5.*i5','none','See R3s imports')
