def _run_step(name, restore=None, interval=0.5):
"""
Instantiate (optionally from a checkpoint if restore is set to the
checkpoitn name) the system and run for interval seconds of
simulated time. At the end of the simulation interval, create a
checkpoint and exit.
As this function is intended to run in its own process using the
multiprocessing framework, the exit is a true call to exit which
terminates the process. Exit codes are used to pass information to
the parent.
"""
if restore is not None:
m5.instantiate(restore)
else:
m5.instantiate()
e = m5.simulate(m5.ticks.fromSeconds(interval))
cause = e.getCause()
if cause in _exit_limit:
m5.checkpoint(name)
sys.exit(_exitcode_checkpoint)
elif cause in _exit_normal:
sys.exit(_exitcode_done)
else:
print("Test failed: Unknown exit cause: %s" % cause)
sys.exit(_exitcode_fail)
def benchCheckpoints_sync(options, maxreltick, cptdir):
import socket
quantum,port,host = options.sync.split(',')
sync_quantum = long(quantum)
TCP_IP = host
TCP_PORT = int(port)
BUFFER_SIZE = 1
pre_tick = m5.curTick()
try:
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((TCP_IP, TCP_PORT))
exit_event = m5.simulate(sync_quantum)
exit_cause = exit_event.getCause()
total_tick_simulated = sync_quantum
num_checkpoints = 0
max_checkpoints = options.max_checkpoints
s.send("R")
data = s.recv(BUFFER_SIZE)
while total_tick_simulated <= maxreltick and\
(exit_cause == "simulate() limit reached" or\
exit_cause == "checkpoint"):
if exit_cause == "checkpoint":
m5.simulate(pre_tick + sync_quantum - m5.curTick())
# send "C" to barrier to notify that we should take a
# checkpoint at the begining of next quantum
s.send("C")
else:
s.send("R")
data = s.recv(BUFFER_SIZE)
pre_tick = m5.curTick()
exit_event = m5.simulate(sync_quantum)
total_tick_simulated += sync_quantum
# if we receive a "C" from barrier, start to dump a checkpoint
if data == "C" :
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped"\
% max_checkpoints
break
exit_cause = exit_event.getCause()
except KeyboardInterrupt:
sys.exit()
except Exception as ex:
print "exception %s occured." %(ex.args[1])
sys.exit()
return exit_event
def run(checkpoint_dir=m5.options.outdir):
# start simulation (and drop checkpoints when requested)
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print("Dropping checkpoint at tick %d" % m5.curTick())
cpt_dir = os.path.join(checkpoint_dir, "cpt.%d" % m5.curTick())
m5.checkpoint(cpt_dir)
print("Checkpoint done.")
else:
print(exit_msg, " @ ", m5.curTick())
break
sys.exit(event.getCode())
def benchCheckpoints(options, maxtick, cptdir):
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
num_checkpoints = 0
max_checkpoints = options.max_checkpoints
while exit_cause == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
return exit_event
def run(args):
cptdir = m5.options.outdir
if args.checkpoint:
print("Checkpoint directory: %s" % cptdir)
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print("Dropping checkpoint at tick %d" % m5.curTick())
cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % m5.curTick())
m5.checkpoint(os.path.join(cpt_dir))
print("Checkpoint done.")
else:
print(exit_msg, " @ ", m5.curTick())
break
sys.exit(event.getCode())
def run(args):
cptdir = m5.options.outdir
if args.checkpoint:
print "Checkpoint directory: %s" % cptdir
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print "Dropping checkpoint at tick %d" % m5.curTick()
cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % m5.curTick())
m5.checkpoint(os.path.join(cpt_dir))
print "Checkpoint done."
else:
print exit_msg, " @ ", m5.curTick()
break
sys.exit(event.getCode())
def benchCheckpoints(options, maxtick, cptdir):
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
num_checkpoints = 0
max_checkpoints = options.max_checkpoints
while exit_cause == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
return exit_event
def takeSimpointCheckpoints(simpoints, interval_length, cptdir):
num_checkpoints = 0
index = 0
last_chkpnt_inst_count = -1
for simpoint in simpoints:
interval, weight, starting_inst_count, actual_warmup_length = simpoint
if starting_inst_count == last_chkpnt_inst_count:
# checkpoint starting point same as last time
# (when warmup period longer than starting point)
exit_cause = "simpoint starting point found"
code = 0
else:
exit_event = m5.simulate()
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
print("Found 'checkpoint' exit event...ignoring...")
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
code = exit_event.getCode()
if exit_cause == "simpoint starting point found":
m5.checkpoint(
joinpath(
cptdir,
"cpt.simpoint_%02d_inst_%d_weight_%f_interval_%d_warmup_%d"
% (index, starting_inst_count, weight, interval_length,
actual_warmup_length)))
print("Checkpoint #%d written. start inst:%d weight:%f" %
(num_checkpoints, starting_inst_count, weight))
num_checkpoints += 1
last_chkpnt_inst_count = starting_inst_count
else:
break
index += 1
print('Exiting @ tick %i (takeSimpointCheckpoints) because %s' %
(m5.curTick(), exit_cause))
print("%d checkpoints taken" % num_checkpoints)
sys.exit(code)
def scriptCheckpoints(options, maxtick, cptdir):
if options.at_instruction or options.simpoint:
checkpoint_inst = options.take_checkpoints
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
print "exit cause = %s" % exit_cause
# skip checkpoint instructions should they exist
while exit_cause == "checkpoint":
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if exit_cause == "a thread reached checkpoint inst number" or \
exit_cause == "sp simulation reached the interval size":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
num_checkpoints = 0
exit_event = m5.simulate(when - m5.curTick())
exit_cause = exit_event.getCause()
while exit_cause == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
exit_cause = exit_event.getCause()
if exit_cause == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
max_checkpoints = options.max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_cause == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
exit_cause = exit_event.getCause()
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
return exit_event
def scriptCheckpoints(options, maxtick, cptdir):
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
print "exit cause = %s" % exit_cause
# skip checkpoint instructions should they exist
while exit_cause == "checkpoint":
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if exit_cause == "a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
num_checkpoints = 0
exit_event = m5.simulate(when - m5.curTick())
exit_cause = exit_event.getCause()
while exit_cause == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
exit_cause = exit_event.getCause()
if exit_cause == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
max_checkpoints = options.max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_cause == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
exit_cause = exit_event.getCause()
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
return exit_event
def takeSimpointCheckpoints(simpoints, interval_length, cptdir):
num_checkpoints = 0
index = 0
last_chkpnt_inst_count = -1
for simpoint in simpoints:
interval, weight, starting_inst_count, actual_warmup_length = simpoint
if starting_inst_count == last_chkpnt_inst_count:
# checkpoint starting point same as last time
# (when warmup period longer than starting point)
exit_cause = "simpoint starting point found"
code = 0
else:
exit_event = m5.simulate()
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
print "Found 'checkpoint' exit event...ignoring..."
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
code = exit_event.getCode()
if exit_cause == "simpoint starting point found":
m5.checkpoint(joinpath(cptdir,
"cpt.simpoint_%02d_inst_%d_weight_%f_interval_%d_warmup_%d"
% (index, starting_inst_count, weight, interval_length,
actual_warmup_length)))
print "Checkpoint #%d written. start inst:%d weight:%f" % \
(num_checkpoints, starting_inst_count, weight)
num_checkpoints += 1
last_chkpnt_inst_count = starting_inst_count
else:
break
index += 1
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
print "%d checkpoints taken" % num_checkpoints
sys.exit(code)
def run(root, options, checkpoint_dir=m5.options.outdir):
# start simulation (and drop checkpoints when requested)
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print("Dropping checkpoint at tick %d" % m5.curTick())
cpt_dir = os.path.join(checkpoint_dir, "cpt.%d" % m5.curTick())
m5.checkpoint(cpt_dir)
print("Checkpoint done.")
else:
print(exit_msg, " @ ", m5.curTick())
break
switch_cpu_list = []
if options.fast_forward:
if options.big_cpus:
sw_tmp_list = [(root.system.bigCluster.cpus[i],
root.system.bigCluster.switch_cpus[i])
for i in range(options.big_cpus)]
switch_cpu_list += sw_tmp_list
if options.mid_cpus:
sw_tmp_list = [(root.system.midCluster.cpus[i],
root.system.midCluster.switch_cpus[i])
for i in range(options.mid_cpus)]
switch_cpu_list += sw_tmp_list
if options.little_cpus:
sw_tmp_list = [(root.system.littleCluster.cpus[i],
root.system.littleCluster.switch_cpus[i])
for i in range(options.little_cpus)]
switch_cpu_list += sw_tmp_list
print("Shift CPU at tick %d" % m5.curTick())
m5.switchCpus(root.system, switch_cpu_list)
m5.stats.reset()
event = m5.simulate()
sys.exit(event.getCode())
def scriptCheckpoints(options, maxtick, cptdir):
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
print "exit cause = %s" % exit_cause
# skip checkpoint instructions should they exist
while exit_cause == "checkpoint":
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if exit_cause == "a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
num_checkpoints = 0
exit_event = m5.simulate(when - m5.curTick())
exit_cause = exit_event.getCause()
while exit_cause == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
exit_cause = exit_event.getCause()
if exit_cause == "simulate() limit reached":
# cuiwl: dump and reset stats.
print "Checkpoint %d." % (num_checkpoints)
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
max_checkpoints = options.max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_cause == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
exit_cause = exit_event.getCause()
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
# dump and reset stats.
print "Checkpoint %d." % (num_checkpoints)
m5.stats.dump()
m5.stats.reset()
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if options.stat_prefix:
shutil.copyfile("/usr/local/google/home/cuiwl/gem5/m5out/stats.txt", "/usr/local/google/home/cuiwl/gem5/m5out/stats/" + options.stat_prefix + "_" + time.strftime("%Y%m%d") + "_" + time.strftime("%H:%M:%S") + ".txt")
else:
shutil.copyfile("/usr/local/google/home/cuiwl/gem5/m5out/stats.txt", "/usr/local/google/home/cuiwl/gem5/m5out/stats/none" + "_" + time.strftime("%Y%m%d") + "_" + time.strftime("%H:%M:%S") + ".txt")
return exit_event
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [
cpu_class(defer_registration=True, cpu_id=(np + i))
for i in xrange(np)
]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
switch_cpus = [
TimingSimpleCPU(defer_registration=True, cpu_id=(np + i))
for i in xrange(np)
]
switch_cpus_1 = [
DerivO3CPU(defer_registration=True, cpu_id=(2 * np + i))
for i in xrange(np)
]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
switch_cpus_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i])
for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal('Unable to find simpoint')
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir,
"cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile('cpt\.([0-9]*)')
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a, b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal('Checkpoint %d not found', cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ''
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None:
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == \
"a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause()
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause()
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
exit_event = m5.simulate(maxtick)
while exit_event.getCause() == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
if exit_cause == '':
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
# NOTE: this function is called from example from configs/example/ruby_fs.py
# like this: "Simulation.run(options, root, system, FutureClass)"
# so, "system" is "testsys" here;
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(defer_registration=True, cpu_id=(np+i))
for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
if not buildEnv['FULL_SYSTEM']:
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(np+i))
for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(defer_registration=True, cpu_id=(2*np+i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
if not buildEnv['FULL_SYSTEM']:
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
switch_cpus_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal('Unable to find simpoint')
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir,
"cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile('cpt\.([0-9]*)')
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a,b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal('Checkpoint %d not found', cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ''
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None :
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == \
"a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause();
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause();
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
#exit_event = m5.simulate(maxtick)
# --Note1: Ruby is created in ruby_fs.py by
# "Ruby.create_system(options, system, system.piobus, system._dma_devices)"
# which assigned: "stats_filename = options.ruby_stats";
# definition of "create_system" is in configs/ruby/Ruby.py, which
# instantiate the ctor of RubySystem: "system.ruby = RubySystem(...)";
#print testsys.ruby._cpu_ruby_ports
#print testsys.ruby.network.ni_flit_size
#print testsys.ruby.profiler.ruby_system
# the ctor of RubySystem is defined in src/mem/ruby/system/RubySystem.py;
# which sets some defaults:
#print testsys.ruby.stats_filename # i.e., ruby.stats
#print testsys.ruby.type
#print testsys.ruby.random_seed
#print testsys.ruby.clock
#print testsys.ruby.block_size_bytes
#print testsys.ruby.mem_size
#print testsys.ruby.no_mem_vec
# () cris: description of changes
# --Note2: initially writing into ruby.stats was done with overwriting;
# so, for each dump point the file was re-written; to fix that I
# changed function "OutputDirectory::create(...)" from src/base/output.cc
# which is called by "RubyExitCallback::process()" from src/mem/ruby/system/System.cc
# function that is the one called at the end of the gem5 run
# as a calback to dump all ruby stats (callback is "registered" in the
# ctor of RubySystem::RubySystem() inside the same file...);
# --Note3: using doExitCleanup inspired from src/python/m5/simulate.py
# (inside which ini and json files are created; you need to rebuild each
# time you change that Python file):
#m5.internal.core.doExitCleanup( False) #clear callback queue?
# --Note4: python/m5/internal/core.py describes "m5.internal.core";
# cris: here I want to dump stats every other delta ticks;
# I need these to be able to generate reliability traces;
NUM_OF_DUMPS = 100
num_i = 0
delta = maxtick/NUM_OF_DUMPS
sim_ticks = m5.curTick()
while (m5.curTick() < maxtick):
sim_ticks += delta
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
#--Note5: "doExitCleanup()" is described in src/sim/core.cc;
# I changed it to be able to call it multiple times;
#--Note6: do not dump stats in ruby.stats for last iteration
# because it will be repeated once more via the exit callbacks
# in src/python/m5/simulate.py...
# Note6: next call of doExitCleanup does actually also reset/clear
# the stats of ruby system via the RubyExitCallback::process() in
# src/mem/ruby/system/System.cc
if num_i < (NUM_OF_DUMPS-1):
print "Dumping also ruby stats at inst %d to file: ruby.stats" %(num_i)
m5.internal.core.doExitCleanup( False) #clear callback queue?
print "Dumping gem5 stats at inst %d to file: stats.txt" %(num_i)
# --Note7: dump() wites into stats.txt; dump() is defined in
# src/python/m5/stats/__init__.py and does its
# thing via the functions described in base/stats/text.cc
#atexit.register(stats.dump) <--- does not work (from simulate.py)
m5.stats.dump()
m5.stats.reset() # <--- what does it actually do?
num_i += 1
# alex's changes:
#while exit_event.getCause() != "m5_exit instruction encountered":
# m5.stats.dump()
# m5.stats.reset()
# exit_event = m5.simulate(maxtick)
#while exit_event.getCause() == "checkpoint":
# m5.checkpoint(joinpath(cptdir, "cpt.%d"))
# num_checkpoints += 1
# if num_checkpoints == max_checkpoints:
# exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
# break
# exit_event = m5.simulate(maxtick - m5.curTick())
# exit_cause = exit_event.getCause()
if exit_cause == '':
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if options.pred_type:
for i in xrange(np):
testsys.cpu[i].predType = options.pred_type
if options.global_hist_size:
for i in xrange(np):
testsys.cpu[i].globalHistoryBits = options.global_hist_size
if options.global_pred_size:
for i in xrange(np):
testsys.cpu[i].globalPredictorSize = options.global_pred_size
if options.local_pred_size:
for i in xrange(np):
testsys.cpu[i].localPredictorSize = options.local_pred_size
if cpu_class:
switch_cpus = [
cpu_class(defer_registration=True, cpu_id=(i)) for i in xrange(np)
]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
if options.repeat_switch:
if options.cpu_type == "arm_detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [O3_ARM_v7a_3(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [DerivO3CPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "inorder":
print "inorder CPU switching not supported"
sys.exit(1)
elif options.cpu_type == "timing":
repeat_switch_cpus = [TimingSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
else:
repeat_switch_cpus = [AtomicSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clock = testsys.cpu[i].clock
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
switch_cpus = [
TimingSimpleCPU(defer_registration=True, cpu_id=(i))
for i in xrange(np)
]
switch_cpus_1 = [
DerivO3CPU(defer_registration=True, cpu_id=(i)) for i in xrange(np)
]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
switch_cpus_1[i].clock = testsys.cpu[i].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i])
for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
maxtick, checkpoint_dir = findCptDir(options, maxtick, cptdir, testsys)
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.doDrain(testsys)
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.doDrain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None:
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_cause = scriptCheckpoints(options, maxtick, cptdir)
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_cause = repeatSwitch(testsys, repeat_switch_cpu_list, maxtick,
options.repeat_switch)
else:
exit_cause = benchCheckpoints(options, maxtick, cptdir)
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
tmp_cpu_list = []
for old_cpu, new_cpu in switch_cpu_list:
tmp_cpu_list.append((new_cpu, old_cpu))
switch_cpu_list = tmp_cpu_list
m5.stats.reset()
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if switch_cpu_list[0][0].type == 'DerivO3CPU':
m5.stats.dump()
elif options.simpoint_mode == "checkpoint_gen":
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
checkpoint_points = simple_end_points[:]
checkpoint_points.reverse()
while exit_cause == "simpoint starting point found":
point_inst = checkpoint_points.pop()
m5.checkpoint(os.path.join(options.checkpoint_dir, "simpoint.ckpt.inst.%d" % point_inst))
if not checkpoint_points:
exit_cause = "final simpoint checkpoint created"
break;
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
print "Exiting @ tick %i because %s" % (m5.curTick(), exit_cause)
def main():
parser = argparse.ArgumentParser(
description="Generic ARM big.LITTLE configuration")
parser.add_argument("--restore-from", type=str, default=None,
help="Restore from checkpoint")
parser.add_argument("--dtb", type=str, default=default_dtb,
help="DTB file to load")
parser.add_argument("--kernel", type=str, default=default_kernel,
help="Linux kernel")
parser.add_argument("--disk", action="append", type=str, default=[],
help="Disks to instantiate")
parser.add_argument("--bootscript", type=str, default=default_rcs,
help="Linux bootscript")
parser.add_argument("--atomic", action="store_true", default=False,
help="Use atomic CPUs")
parser.add_argument("--kernel-init", type=str, default="/sbin/init",
help="Override init")
parser.add_argument("--big-cpus", type=int, default=1,
help="Number of big CPUs to instantiate")
parser.add_argument("--little-cpus", type=int, default=1,
help="Number of little CPUs to instantiate")
parser.add_argument("--caches", action="store_true", default=False,
help="Instantiate caches")
parser.add_argument("--last-cache-level", type=int, default=2,
help="Last level of caches (e.g. 3 for L3)")
parser.add_argument("--big-cpu-clock", type=str, default="2GHz",
help="Big CPU clock frequency")
parser.add_argument("--little-cpu-clock", type=str, default="1GHz",
help="Little CPU clock frequency")
m5.ticks.fixGlobalFrequency()
options = parser.parse_args()
if options.atomic:
cpu_config = { 'cpu' : AtomicSimpleCPU }
big_cpu_config, little_cpu_config = cpu_config, cpu_config
else:
big_cpu_config = { 'cpu' : CpuConfig.get("arm_detailed"),
'l1i' : devices.L1I,
'l1d' : devices.L1D,
'wcache' : devices.WalkCache,
'l2' : devices.L2 }
little_cpu_config = { 'cpu' : MinorCPU,
'l1i' : devices.L1I,
'l1d' : devices.L1D,
'wcache' : devices.WalkCache,
'l2' : devices.L2 }
big_cpu_class = big_cpu_config['cpu']
little_cpu_class = little_cpu_config['cpu']
kernel_cmd = [
"earlyprintk=pl011,0x1c090000",
"console=ttyAMA0",
"lpj=19988480",
"norandmaps",
"loglevel=8",
"mem=%s" % default_mem_size,
"root=/dev/vda1",
"rw",
"init=%s" % options.kernel_init,
"vmalloc=768MB",
]
root = Root(full_system=True)
assert big_cpu_class.memory_mode() == little_cpu_class.memory_mode()
disks = default_disk if len(options.disk) == 0 else options.disk
system = createSystem(options.kernel, big_cpu_class.memory_mode(),
options.bootscript, disks=disks)
root.system = system
system.boot_osflags = " ".join(kernel_cmd)
# big cluster
if options.big_cpus > 0:
system.bigCluster = CpuCluster()
system.bigCluster.addCPUs(big_cpu_config, options.big_cpus,
options.big_cpu_clock)
# LITTLE cluster
if options.little_cpus > 0:
system.littleCluster = CpuCluster()
system.littleCluster.addCPUs(little_cpu_config, options.little_cpus,
options.little_cpu_clock)
# add caches
if options.caches:
cluster_mem_bus = addCaches(system, options.last_cache_level)
else:
if big_cpu_class.require_caches():
m5.util.panic("CPU model %s requires caches" % str(big_cpu_class))
if little_cpu_class.require_caches():
m5.util.panic("CPU model %s requires caches" %
str(little_cpu_class))
cluster_mem_bus = system.membus
# connect each cluster to the memory hierarchy
for cluster in system._clusters:
cluster.connectMemSide(cluster_mem_bus)
# Linux device tree
system.dtb_filename = SysPaths.binary(options.dtb)
# Get and load from the chkpt or simpoint checkpoint
if options.restore_from is not None:
m5.instantiate(options.restore_from)
else:
m5.instantiate()
# start simulation (and drop checkpoints when requested)
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print "Dropping checkpoint at tick %d" % m5.curTick()
cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % m5.curTick())
m5.checkpoint(os.path.join(cpt_dir))
print "Checkpoint done."
else:
print exit_msg, " @ ", m5.curTick()
break
sys.exit(event.getCode())
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
new = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
new = [cpu_class(defer_registration=True, cpu_id=(np + i)) for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
new[i].system = testsys
if not buildEnv["FULL_SYSTEM"]:
new[i].workload = testsys.cpu[i].workload
new[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
new[i].max_insts_any_thread = options.maxinsts
testsys.new = new
switch_cpu_list = [(testsys.cpu[i], new[i]) for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
new = [TimingSimpleCPU(defer_registration=True, cpu_id=(np + i)) for i in xrange(np)]
new_1 = [DerivO3CPU(defer_registration=True, cpu_id=(2 * np + i)) for i in xrange(np)]
for i in xrange(np):
new[i].system = testsys
new_1[i].system = testsys
if not buildEnv["FULL_SYSTEM"]:
new[i].workload = testsys.cpu[i].workload
new_1[i].workload = testsys.cpu[i].workload
new[i].clock = testsys.cpu[0].clock
new_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal("simpoint not found")
testsys.cpu[i].max_insts_any_thread = testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
new[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
new_1[i].max_insts_any_thread = options.maxinsts
testsys.new = new
testsys.new_1 = new_1
switch_cpu_list = [(testsys.cpu[i], new[i]) for i in xrange(np)]
switch_cpu_list1 = [(new[i], new_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and (options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal("no simpoint for testsys.cpu[%d].workload[0]", i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal("Unable to find simpoint")
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir, "cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile("cpt\.([0-9]*)")
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a, b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal("Checkpoint %d not found", cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % (testsys.new[0].max_insts_any_thread)
# warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % (testsys.new_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ""
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None:
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == "a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % (options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause()
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause()
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
exit_event = m5.simulate(maxtick)
while exit_event.getCause() == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
if exit_cause == "":
exit_cause = exit_event.getCause()
print "Exiting @ tick %i because %s" % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class, numpids):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.repeat_switch:
if options.cpu_type == "arm_detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [O3_ARM_v7a_3(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [DerivO3CPU(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "inorder":
print "inorder CPU switching not supported"
sys.exit(1)
elif options.cpu_type == "timing":
repeat_switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
else:
repeat_switch_cpus = [AtomicSimpleCPU(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clock = testsys.cpu[i].clock
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i]) for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i]) for i in xrange(np)]
if options.standard_switch:
switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
switch_cpus_1[i].clock = testsys.cpu[i].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal("simpoint not found")
testsys.cpu[i].max_insts_any_thread = testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and (options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal("no simpoint for testsys.cpu[%d].workload[0]", i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
maxtick, checkpoint_dir = findCptDir(options, maxtick, cptdir, testsys)
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate(maxtick, numpids)
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate(maxtick, numpids)
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % (testsys.switch_cpus[0].max_insts_any_thread)
# warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate(maxtick, numpids)
else:
exit_event = m5.simulate(options.standard_switch, numpids)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % (testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None:
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_cause = scriptCheckpoints(options, cptdir)
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_cause = repeatSwitch(testsys, repeat_switch_cpu_list, maxtick, options.repeat_switch)
else:
exit_cause = benchCheckpoints(options, maxtick, cptdir, numpids)
print "Exiting @ tick %i because %s" % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(switched_out=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.repeat_switch:
switch_class = getCPUClass(options.cpu_type)[0]
if switch_class.require_caches() and \
not options.caches:
print "%s: Must be used with caches" % str(switch_class)
sys.exit(1)
if not switch_class.support_take_over():
print "%s: CPU switching not supported" % str(switch_class)
sys.exit(1)
repeat_switch_cpus = [switch_class(switched_out=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clock = testsys.cpu[i].clock
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
switch_cpus = [TimingSimpleCPU(switched_out=True, cpu_id=(i))
for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(switched_out=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
switch_cpus_1[i].clock = testsys.cpu[i].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
maxtick, checkpoint_dir = findCptDir(options, maxtick, cptdir, testsys)
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
m5.switchCpus(testsys, switch_cpu_list)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.switchCpus(testsys, switch_cpu_list1)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None :
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_event = scriptCheckpoints(options, maxtick, cptdir)
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_event = repeatSwitch(testsys, repeat_switch_cpu_list,
maxtick, options.repeat_switch)
else:
exit_event = benchCheckpoints(options, maxtick, cptdir)
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause())
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
if not m5.options.interactive:
sys.exit(exit_event.getCode())
# Required for running kvm on multiple host cores.
# Uses gem5's parallel event queue feature
# Note: The simulator is quite picky about this number!
root.sim_quantum = int(1e9) # 1 ms
# Instantiate all of the objects we've created above
m5.instantiate()
globalStart = time.time()
print("Running the simulation")
exit_event = m5.simulate()
# While there is still something to do in the guest keep executing.
# This is needed since we exit for the ROI begin/end
while exit_event.getCause() != "m5_exit instruction encountered":
print("Exited because", exit_event.getCause())
# If the user pressed ctrl-c on the host, then we really should exit
if exit_event.getCause() == "user interrupt received":
print("User interrupt. Exiting")
break
elif exit_event.getCause() == "checkpoint":
checkpoint_dir = opts.checkpoint_dir + "/" + str(opts.num_cpus)
m5.checkpoint(checkpoint_dir)
print("Continuing")
exit_event = m5.simulate()
print("Normally exiting simulation: m5_exit instruction encountered")
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
while exit_cause != "all threads reached the max instruction count":
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
inpipe.send("/sbin/m5 checkpoint\n")
print 'here'
while exit_cause != "checkpoint":
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if exit_cause == "checkpoint":
mkdir_p(options.checkpoint_dir)
m5.checkpoint(os.path.join(options.checkpoint_dir, "cpt.%s" % options.benchmark.replace(':', '_')))
pyterm.close_pyterm(term, inpipe)
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause())
if not m5.options.interactive:
sys.exit(exit_event.getCode())
sys.exit(0)
elif start_count >= len(sorted_points) and options.simpoint_mode =="fastfwd":
inpipe.send("/sbin/m5 switchcpus\n")
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if exit_cause == "switch cpus":
print "Done fast-forwarding -- Switching to detailed CPU"
def run(options, root, testsys, cpu_class):
if options.disable_ports:
m5.disableAllListeners()
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [
cpu_class(switched_out=True, cpu_id=(i)) for i in xrange(np)
]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
switch_cpus[i].progress_interval = \
testsys.cpu[i].progress_interval
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
# If elastic tracing is enabled attach the elastic trace probe
# to the switch CPUs
if options.elastic_trace_en:
CpuConfig.config_etrace(cpu_class, switch_cpus, options)
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
if cpu_class == getCPUClass("detailed"):
config_O3cpu(options, testsys.switch_cpus)
if options.repeat_switch:
switch_class = getCPUClass(options.cpu_type)[0]
if switch_class.require_caches() and \
not options.caches:
print "%s: Must be used with caches" % str(switch_class)
sys.exit(1)
if not switch_class.support_take_over():
print "%s: CPU switching not supported" % str(switch_class)
sys.exit(1)
repeat_switch_cpus = [switch_class(switched_out=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
timing_cpus = [
TimingSimpleCPU(switched_out=True, cpu_id=(i)) for i in xrange(np)
]
o3_cpus = [
DerivO3CPU(switched_out=True, cpu_id=(i)) for i in xrange(np)
]
config_O3cpu(options, o3_cpus)
for i in xrange(np):
timing_cpus[i].system = testsys
o3_cpus[i].system = testsys
timing_cpus[i].workload = testsys.cpu[i].workload
o3_cpus[i].workload = testsys.cpu[i].workload
timing_cpus[i].clk_domain = testsys.cpu[i].clk_domain
o3_cpus[i].clk_domain = testsys.cpu[i].clk_domain
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
timing_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
o3_cpus[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
timing_cpus[i].addCheckerCpu()
o3_cpus[i].addCheckerCpu()
testsys.timing_cpus = timing_cpus
testsys.o3_cpus = o3_cpus
switch_cpu_list = [(testsys.cpu[i], timing_cpus[i])
for i in xrange(np)]
switch_cpu_list1 = [(timing_cpus[i], o3_cpus[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
if options.take_simpoint_checkpoints != None:
simpoints, interval_length = parseSimpointAnalysisFile(
options, testsys)
checkpoint_dir = None
if options.checkpoint_restore:
cpt_starttick, checkpoint_dir = findCptDir(options, cptdir, testsys)
m5.instantiate(checkpoint_dir)
# Initialization is complete. If we're not in control of simulation
# (that is, if we're a slave simulator acting as a component in another
# 'master' simulator) then we're done here. The other simulator will
# call simulate() directly. --initialize-only is used to indicate this.
if options.initialize_only:
return
# Handle the max tick settings now that tick frequency was resolved
# during system instantiation
# NOTE: the maxtick variable here is in absolute ticks, so it must
# include any simulated ticks before a checkpoint
explicit_maxticks = 0
maxtick_from_abs = m5.MaxTick
maxtick_from_rel = m5.MaxTick
maxtick_from_maxtime = m5.MaxTick
if options.abs_max_tick:
maxtick_from_abs = options.abs_max_tick
explicit_maxticks += 1
if options.rel_max_tick:
maxtick_from_rel = options.rel_max_tick
if options.checkpoint_restore:
# NOTE: this may need to be updated if checkpoints ever store
# the ticks per simulated second
maxtick_from_rel += cpt_starttick
if options.at_instruction or options.simpoint:
warn("Relative max tick specified with --at-instruction or" \
" --simpoint\n These options don't specify the " \
"checkpoint start tick, so assuming\n you mean " \
"absolute max tick")
explicit_maxticks += 1
if options.maxtime:
maxtick_from_maxtime = m5.ticks.fromSeconds(options.maxtime)
explicit_maxticks += 1
if explicit_maxticks > 1:
warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\
" Using least")
maxtick = min([maxtick_from_abs, maxtick_from_rel, maxtick_from_maxtime])
if options.checkpoint_restore != None and maxtick < cpt_starttick:
fatal("Bad maxtick (%d) specified: " \
"Checkpoint starts starts from tick: %d", maxtick, cpt_starttick)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
m5.switchCpus(testsys, switch_cpu_list)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.timing_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.o3_cpus[0].max_insts_any_thread)
m5.switchCpus(testsys, switch_cpu_list1)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if (options.take_checkpoints or options.take_simpoint_checkpoints) \
and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None:
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_event = scriptCheckpoints(options, maxtick, cptdir)
# Take SimPoint checkpoints
elif options.take_simpoint_checkpoints != None:
takeSimpointCheckpoints(simpoints, interval_length, cptdir)
# Restore from SimPoint checkpoints
elif options.restore_simpoint_checkpoint != None:
restoreSimpointCheckpoint()
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_event = repeatSwitch(testsys, repeat_switch_cpu_list, maxtick,
options.repeat_switch)
else:
exit_event = benchCheckpoints(options, maxtick, cptdir)
print 'Exiting @ tick %i because %s' % (m5.curTick(),
exit_event.getCause())
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
if not m5.options.interactive:
sys.exit(exit_event.getCode())
def run(options, root, testsys, cpu_class):
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys[0].cpu[i].progress_interval = options.prog_interval
testsys[1].cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys[0].cpu[i].max_insts_any_thread = options.maxinsts
testsys[1].cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus01 = [
cpu_class(switched_out=True, cpu_id=(i)) for i in xrange(np)
]
ncpuswitch = len(switch_cpus01)
temp02 = [
cpu_class(switched_out=True, cpu_id=(i + ncpuswitch))
for i in xrange(np)
]
switch_cpus = switch_cpus01 + temp02
for i in xrange(np):
if options.fast_forward:
testsys[0].cpu[i].max_insts_any_thread = int(
options.fast_forward)
switch_cpus[i].system = testsys[0]
switch_cpus[i].workload = testsys[0].cpu[i].workload
switch_cpus[i].clk_domain = testsys[0].cpu[i].clk_domain
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
for i in xrange(np):
if options.fast_forward:
testsys[1].cpu[i].max_insts_any_thread = int(
options.fast_forward)
switch_cpus[i + ncpuswitch].system = testsys[1]
switch_cpus[i + ncpuswitch].workload = testsys[1].cpu[i].workload
switch_cpus[i +
ncpuswitch].clk_domain = testsys[1].cpu[i].clk_domain
# simulation period
if options.maxinsts:
switch_cpus[i +
ncpuswitch].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i + ncpuswitch].addCheckerCpu()
testsys[0].switch_cpus = switch_cpus01
testsys[1].switch_cpus = temp02
switch_cpu_list = [(testsys[0].cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list_temp = [(testsys[1].cpu[i],
switch_cpus[i + ncpuswitch])
for i in xrange(np)]
switch_cpu_list = switch_cpu_list + switch_cpu_list_temp
if options.repeat_switch:
switch_class = getCPUClass(options.cpu_type)[0]
if switch_class.require_caches() and \
not options.caches:
print "%s: Must be used with caches" % str(switch_class)
sys.exit(1)
if not switch_class.support_take_over():
print "%s: CPU switching not supported" % str(switch_class)
sys.exit(1)
repeat_switch_cpus = [switch_class(switched_out=True, \
cpu_id=(i)) for i in xrange(np*2)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys[0]
repeat_switch_cpus[i].workload = testsys[0].cpu[i].workload
repeat_switch_cpus[i].clk_domain = testsys[0].cpu[i].clk_domain
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
for i in xrange(np):
repeat_switch_cpus[i + ncpuswitch].system = testsys[1]
repeat_switch_cpus[
i + ncpuswitch].workload = testsys[1].cpu[i].workload
repeat_switch_cpus[
i + ncpuswitch].clk_domain = testsys[1].cpu[i].clk_domain
if options.maxinsts:
repeat_switch_cpus[
i + ncpuswitch].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i + ncpuswitch].addCheckerCpu()
testsys[0].repeat_switch_cpus = []
testsys[1].repeat_switch_cpus = []
for j in xrange(np * 2):
if j < np:
testsys[0].repeat_switch_cpus.append(repeat_switch_cpus[j])
else:
testsys[1].repeat_switch_cpus.append(repeat_switch_cpus[j])
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np * 2)]
else:
repeat_switch_cpu_list_1 = [
(testsys[0].cpu[i], repeat_switch_cpus[i]) for i in xrange(np)
]
repeat_switch_cpu_list_2 = [(testsys[1].cpu[i + ncpuswitch],
repeat_switch_cpus[i + ncpuswitch])
for i in xrange(np)]
repeat_switch_cpu_list = repeat_switch_cpu_list_1 + repeat_switch_cpu_list_2
if options.standard_switch:
switch_cpus = [
TimingSimpleCPU(switched_out=True, cpu_id=(i))
for i in xrange(np * 2)
]
switch_cpus_1 = [
DerivO3CPU(switched_out=True, cpu_id=(i)) for i in xrange(np * 2)
]
for i in xrange(np * 2):
if i < np:
switch_cpus[i].system = testsys[0]
switch_cpus_1[i].system = testsys[0]
switch_cpus[i].workload = testsys[0].cpu[i].workload
switch_cpus_1[i].workload = testsys[0].cpu[i].workload
switch_cpus[i].clk_domain = testsys[0].cpu[i].clk_domain
switch_cpus_1[i].clk_domain = testsys[0].cpu[i].clk_domain
else:
switch_cpus[i].system = testsys[1]
switch_cpus_1[i].system = testsys[1]
switch_cpus[i].workload = testsys[1].cpu[i].workload
switch_cpus_1[i].workload = testsys[1].cpu[i].workload
switch_cpus[i].clk_domain = testsys[1].cpu[i].clk_domain
switch_cpus_1[i].clk_domain = testsys[1].cpu[i].clk_domain
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
if i < np:
testsys[0].cpu[i].max_insts_any_thread = 1
else:
testsys[1].cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
if i < np:
testsys[0].cpu[i].max_insts_any_thread = int(
options.fast_forward)
else:
testsys[1].cpu[i].max_insts_any_thread = int(
options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if i < np:
if testsys[0].cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys[0].cpu[i].max_insts_any_thread = \
testsys[0].cpu[i].workload[0].simpoint
else:
if testsys[1].cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys[1].cpu[i].max_insts_any_thread = \
testsys[1].cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
if i < np:
testsys[0].cpu[i].max_insts_any_thread = 1
else:
testsys[1].cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys[0].switch_cpus = switch_cpus
testsys[1].switch_cpus = switch_cpus
testsys[0].switch_cpus_1 = switch_cpus_1
testsys[1].switch_cpus_1 = switch_cpus_1
switch_cpu_list_1 = [(testsys[0].cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list_2 = [(testsys[1].cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list = switch_cpu_list_1 + switch_cpu_list_2
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i])
for i in switch_cpu_list1]
for i in xrange(np * 2):
if i < np:
switch_cpu_list1_1 = [switch_cpu_list1[i]]
else:
switch_cpu_list1_2 = [switch_cpu_list1[i]]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np * 2):
if i < np:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys[0].cpu[i].workload[0].simpoint) + offset
testsys[0].cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
if testsys[1].cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys[1].cpu[i].workload[0].simpoint) + offset
testsys[1].cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np * 2):
if i < np:
testsys[0].cpu[i].max_insts_any_thread = offset
else:
testsys[1].cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
checkpoint_dir1 = None
if options.checkpoint_restore:
cpt_starttick, checkpoint_dir = findCptDir(options, cptdir, testsys[0])
cpt_starttick1, checkpoint_dir1 = findCptDir(options, cptdir,
testsys[1])
m5.instantiate(checkpoint_dir)
m5.instantiate(checkpoint_dir1)
# Handle the max tick settings now that tick frequency was resolved
# during system instantiation
# NOTE: the maxtick variable here is in absolute ticks, so it must
# include any simulated ticks before a checkpoint
explicit_maxticks = 0
maxtick_from_abs = m5.MaxTick
maxtick_from_rel = m5.MaxTick
maxtick_from_maxtime = m5.MaxTick
explicit_maxticks1 = 0
maxtick_from_abs1 = m5.MaxTick
maxtick_from_rel1 = m5.MaxTick
maxtick_from_maxtime1 = m5.MaxTick
if options.abs_max_tick:
maxtick_from_abs = options.abs_max_tick
explicit_maxticks += 1
maxtick_from_abs1 = options.abs_max_tick
explicit_maxticks1 += 1
if options.rel_max_tick:
maxtick_from_rel = options.rel_max_tick
maxtick_from_rel1 = options.rel_max_tick
if options.checkpoint_restore:
# NOTE: this may need to be updated if checkpoints ever store
# the ticks per simulated second
maxtick_from_rel += cpt_starttick
maxtick_from_rel1 += cpt_starttick1
if options.at_instruction or options.simpoint:
warn("Relative max tick specified with --at-instruction or" \
" --simpoint\n These options don't specify the " \
"checkpoint start tick, so assuming\n you mean " \
"absolute max tick")
explicit_maxticks += 1
explicit_maxticks1 += 1
if options.maxtime:
maxtick_from_maxtime = m5.ticks.fromSeconds(options.maxtime)
explicit_maxticks += 1
maxtick_from_maxtime1 = m5.ticks.fromSeconds(options.maxtime)
explicit_maxticks1 += 1
if explicit_maxticks > 1:
warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\
" Using least")
if explicit_maxticks1 > 1:
warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\
" Using least")
maxtick = min([maxtick_from_abs, maxtick_from_rel, maxtick_from_maxtime])
maxtick1 = min(
[maxtick_from_abs1, maxtick_from_rel1, maxtick_from_maxtime1])
if options.checkpoint_restore != None and maxtick < cpt_starttick:
fatal("Bad maxtick (%d) specified: " \
"Checkpoint starts starts from tick: %d", maxtick, cpt_starttick)
if options.checkpoint_restore != None and maxtick1 < cpt_starttick1:
fatal("Bad maxtick (%d) specified: " \
"Checkpoint starts starts from tick: %d", maxtick1, cpt_starttick1)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys[0].cpu[0].max_insts_any_thread)
print "Switch at instruction count:%s" % \
str(testsys[1].cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys[0].cpu[0].max_insts_any_thread)
print "Switch at instruction count:%s" % \
str(testsys[1].cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
m5.switchCpus(testsys[0], switch_cpu_list_1)
m5.switchCpus(testsys[1], switch_cpu_list_2)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys[0].switch_cpus[0].max_insts_any_thread)
print "Switch at instruction count:%d" % \
(testsys[1].switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys[0].switch_cpus_1[0].max_insts_any_thread)
print "Simulation ends instruction count:%d" % \
(testsys[1].switch_cpus_1[0].max_insts_any_thread)
m5.switchCpus(testsys[0], switch_cpu_list1_1)
m5.switchCpus(testsys[1], switch_cpu_list1_2)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
cptdir1 = m5.options.outdir
else:
cptdir = getcwd()
cptdir1 = getcwd()
if options.take_checkpoints != None:
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_event = scriptCheckpoints(options, maxtick, cptdir)
exit_event1 = scriptCheckpoints(options, maxtick1, cptdir1)
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_event = repeatSwitch(testsys[0], repeat_switch_cpu_list_1,
maxtick, options.repeat_switch)
else:
exit_event = benchCheckpoints(options, maxtick, cptdir)
if options.repeat_switch and maxtick1 > options.repeat_switch:
exit_event1 = repeatSwitch(testsys[1], repeat_switch_cpu_list_2,
maxtick1, options.repeat_switch)
else:
exit_event = benchCheckpoints(options, maxtick, cptdir)
exit_event1 = benchCheckpoints(options, maxtick1, cptdir1)
print 'Exiting @ tick %i because %s' % (m5.curTick(),
exit_event.getCause())
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
m5.checkpoint(joinpath(cptdir1, "cpt.%d"))
if not m5.options.interactive:
sys.exit(exit_event.getCode())
sys.exit(exit_event1.getCode())
def main():
parser = argparse.ArgumentParser(
description="Generic ARM big.LITTLE configuration")
parser.add_argument("--restore-from",
type=str,
default=None,
help="Restore from checkpoint")
parser.add_argument("--dtb",
type=str,
default=default_dtb,
help="DTB file to load")
parser.add_argument("--kernel",
type=str,
default=default_kernel,
help="Linux kernel")
parser.add_argument("--disk",
action="append",
type=str,
default=[],
help="Disks to instantiate")
parser.add_argument("--bootscript",
type=str,
default=default_rcs,
help="Linux bootscript")
parser.add_argument("--atomic",
action="store_true",
default=False,
help="Use atomic CPUs")
parser.add_argument("--kernel-init",
type=str,
default="/sbin/init",
help="Override init")
parser.add_argument("--big-cpus",
type=int,
default=1,
help="Number of big CPUs to instantiate")
parser.add_argument("--little-cpus",
type=int,
default=1,
help="Number of little CPUs to instantiate")
parser.add_argument("--caches",
action="store_true",
default=False,
help="Instantiate caches")
parser.add_argument("--last-cache-level",
type=int,
default=2,
help="Last level of caches (e.g. 3 for L3)")
parser.add_argument("--big-cpu-clock",
type=str,
default="2GHz",
help="Big CPU clock frequency")
parser.add_argument("--little-cpu-clock",
type=str,
default="1GHz",
help="Little CPU clock frequency")
m5.ticks.fixGlobalFrequency()
options = parser.parse_args()
kernel_cmd = [
"earlyprintk=pl011,0x1c090000",
"console=ttyAMA0",
"lpj=19988480",
"norandmaps",
"loglevel=8",
"mem=%s" % default_mem_size,
"root=/dev/vda1",
"rw",
"init=%s" % options.kernel_init,
"vmalloc=768MB",
]
root = Root(full_system=True)
disks = default_disk if len(options.disk) == 0 else options.disk
system = createSystem(options.kernel, options.bootscript, disks=disks)
root.system = system
system.boot_osflags = " ".join(kernel_cmd)
AtomicCluster = devices.AtomicCluster
if options.big_cpus + options.little_cpus == 0:
m5.util.panic("Empty CPU clusters")
# big cluster
if options.big_cpus > 0:
if options.atomic:
system.bigCluster = AtomicCluster(system, options.big_cpus,
options.big_cpu_clock)
else:
system.bigCluster = BigCluster(system, options.big_cpus,
options.big_cpu_clock)
mem_mode = system.bigCluster.memoryMode()
# little cluster
if options.little_cpus > 0:
if options.atomic:
system.littleCluster = AtomicCluster(system, options.little_cpus,
options.little_cpu_clock)
else:
system.littleCluster = LittleCluster(system, options.little_cpus,
options.little_cpu_clock)
mem_mode = system.littleCluster.memoryMode()
if options.big_cpus > 0 and options.little_cpus > 0:
if system.bigCluster.memoryMode() != system.littleCluster.memoryMode():
m5.util.panic("Memory mode missmatch among CPU clusters")
system.mem_mode = mem_mode
# create caches
system.addCaches(options.caches, options.last_cache_level)
if not options.caches:
if options.big_cpus > 0 and system.bigCluster.requireCaches():
m5.util.panic("Big CPU model requires caches")
if options.little_cpus > 0 and system.littleCluster.requireCaches():
m5.util.panic("Little CPU model requires caches")
# Linux device tree
system.dtb_filename = SysPaths.binary(options.dtb)
# Get and load from the chkpt or simpoint checkpoint
if options.restore_from is not None:
m5.instantiate(options.restore_from)
else:
m5.instantiate()
# start simulation (and drop checkpoints when requested)
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print "Dropping checkpoint at tick %d" % m5.curTick()
cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % m5.curTick())
m5.checkpoint(os.path.join(cpt_dir))
print "Checkpoint done."
else:
print exit_msg, " @ ", m5.curTick()
break
sys.exit(event.getCode())
def main():
parser = argparse.ArgumentParser(
description="Generic ARM big.LITTLE configuration")
parser.add_argument("--restore-from", type=str, default=None,
help="Restore from checkpoint")
parser.add_argument("--dtb", type=str, default=default_dtb,
help="DTB file to load")
parser.add_argument("--kernel", type=str, default=default_kernel,
help="Linux kernel")
parser.add_argument("--disk", action="append", type=str, default=[],
help="Disks to instantiate")
parser.add_argument("--bootscript", type=str, default=default_rcs,
help="Linux bootscript")
parser.add_argument("--atomic", action="store_true", default=False,
help="Use atomic CPUs")
parser.add_argument("--kernel-init", type=str, default="/sbin/init",
help="Override init")
parser.add_argument("--big-cpus", type=int, default=1,
help="Number of big CPUs to instantiate")
parser.add_argument("--little-cpus", type=int, default=1,
help="Number of little CPUs to instantiate")
parser.add_argument("--caches", action="store_true", default=False,
help="Instantiate caches")
parser.add_argument("--last-cache-level", type=int, default=2,
help="Last level of caches (e.g. 3 for L3)")
parser.add_argument("--big-cpu-clock", type=str, default="2GHz",
help="Big CPU clock frequency")
parser.add_argument("--little-cpu-clock", type=str, default="1GHz",
help="Little CPU clock frequency")
m5.ticks.fixGlobalFrequency()
options = parser.parse_args()
kernel_cmd = [
"earlyprintk=pl011,0x1c090000",
"console=ttyAMA0",
"lpj=19988480",
"norandmaps",
"loglevel=8",
"mem=%s" % default_mem_size,
"root=/dev/vda1",
"rw",
"init=%s" % options.kernel_init,
"vmalloc=768MB",
]
root = Root(full_system=True)
disks = [default_disk] if len(options.disk) == 0 else options.disk
system = createSystem(options.caches,
options.kernel,
options.bootscript,
disks=disks)
root.system = system
system.boot_osflags = " ".join(kernel_cmd)
AtomicCluster = devices.AtomicCluster
if options.big_cpus + options.little_cpus == 0:
m5.util.panic("Empty CPU clusters")
# big cluster
if options.big_cpus > 0:
if options.atomic:
system.bigCluster = AtomicCluster(system, options.big_cpus,
options.big_cpu_clock)
else:
system.bigCluster = BigCluster(system, options.big_cpus,
options.big_cpu_clock)
mem_mode = system.bigCluster.memoryMode()
# little cluster
if options.little_cpus > 0:
if options.atomic:
system.littleCluster = AtomicCluster(system, options.little_cpus,
options.little_cpu_clock)
else:
system.littleCluster = LittleCluster(system, options.little_cpus,
options.little_cpu_clock)
mem_mode = system.littleCluster.memoryMode()
if options.big_cpus > 0 and options.little_cpus > 0:
if system.bigCluster.memoryMode() != system.littleCluster.memoryMode():
m5.util.panic("Memory mode missmatch among CPU clusters")
system.mem_mode = mem_mode
# create caches
system.addCaches(options.caches, options.last_cache_level)
if not options.caches:
if options.big_cpus > 0 and system.bigCluster.requireCaches():
m5.util.panic("Big CPU model requires caches")
if options.little_cpus > 0 and system.littleCluster.requireCaches():
m5.util.panic("Little CPU model requires caches")
# Linux device tree
system.dtb_filename = SysPaths.binary(options.dtb)
# Get and load from the chkpt or simpoint checkpoint
if options.restore_from is not None:
m5.instantiate(options.restore_from)
else:
m5.instantiate()
# start simulation (and drop checkpoints when requested)
while True:
event = m5.simulate()
exit_msg = event.getCause()
if exit_msg == "checkpoint":
print "Dropping checkpoint at tick %d" % m5.curTick()
cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % m5.curTick())
m5.checkpoint(os.path.join(cpt_dir))
print "Checkpoint done."
else:
print exit_msg, " @ ", m5.curTick()
break
sys.exit(event.getCode())
def run(options, root, testsys, cpu_class):
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(switched_out=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
switch_cpus[i].progress_interval = testsys.cpu[i].progress_interval
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.repeat_switch:
switch_class = getCPUClass(options.cpu_type)[0]
if switch_class.require_caches() and \
not options.caches:
print "%s: Must be used with caches" % str(switch_class)
sys.exit(1)
if not switch_class.support_take_over():
print "%s: CPU switching not supported" % str(switch_class)
sys.exit(1)
repeat_switch_cpus = [switch_class(switched_out=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
switch_cpus = [TimingSimpleCPU(switched_out=True, cpu_id=(i))
for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(switched_out=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
switch_cpus_1[i].clk_domain = testsys.cpu[i].clk_domain
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
if options.take_simpoint_checkpoints != None:
simpoints, interval_length = parseSimpointAnalysisFile(options, testsys)
checkpoint_dir = None
if options.checkpoint_restore:
cpt_starttick, checkpoint_dir = findCptDir(options, cptdir, testsys)
m5.instantiate(checkpoint_dir)
# Initialization is complete. If we're not in control of simulation
# (that is, if we're a slave simulator acting as a component in another
# 'master' simulator) then we're done here. The other simulator will
# call simulate() directly. --initialize-only is used to indicate this.
if options.initialize_only:
return
# Handle the max tick settings now that tick frequency was resolved
# during system instantiation
# NOTE: the maxtick variable here is in absolute ticks, so it must
# include any simulated ticks before a checkpoint
explicit_maxticks = 0
maxtick_from_abs = m5.MaxTick
maxtick_from_rel = m5.MaxTick
maxtick_from_maxtime = m5.MaxTick
if options.abs_max_tick:
maxtick_from_abs = options.abs_max_tick
explicit_maxticks += 1
if options.rel_max_tick:
maxtick_from_rel = options.rel_max_tick
if options.checkpoint_restore:
# NOTE: this may need to be updated if checkpoints ever store
# the ticks per simulated second
maxtick_from_rel += cpt_starttick
if options.at_instruction or options.simpoint:
warn("Relative max tick specified with --at-instruction or" \
" --simpoint\n These options don't specify the " \
"checkpoint start tick, so assuming\n you mean " \
"absolute max tick")
explicit_maxticks += 1
if options.maxtime:
maxtick_from_maxtime = m5.ticks.fromSeconds(options.maxtime)
explicit_maxticks += 1
if explicit_maxticks > 1:
warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\
" Using least")
maxtick = min([maxtick_from_abs, maxtick_from_rel, maxtick_from_maxtime])
if options.checkpoint_restore != None and maxtick < cpt_starttick:
fatal("Bad maxtick (%d) specified: " \
"Checkpoint starts starts from tick: %d", maxtick, cpt_starttick)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
m5.switchCpus(testsys, switch_cpu_list)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.switchCpus(testsys, switch_cpu_list1)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if (options.take_checkpoints or options.take_simpoint_checkpoints) \
and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None :
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_event = scriptCheckpoints(options, maxtick, cptdir)
# Take SimPoint checkpoints
elif options.take_simpoint_checkpoints != None:
takeSimpointCheckpoints(simpoints, interval_length, cptdir)
# Restore from SimPoint checkpoints
elif options.restore_simpoint_checkpoint != None:
restoreSimpointCheckpoint()
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_event = repeatSwitch(testsys, repeat_switch_cpu_list,
maxtick, options.repeat_switch)
else:
exit_event = benchCheckpoints(options, maxtick, cptdir)
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause())
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
if not m5.options.interactive:
sys.exit(exit_event.getCode())
print("User interrupt. Exiting")
break
print("Exited because", exit_event.getCause())
if exit_event.getCause() == "work started count reach":
start_tick = m5.curTick()
start_insts = system.totalInsts()
foundROI = True
elif exit_event.getCause() == "work items exit count reached":
end_tick = m5.curTick()
end_insts = system.totalInsts()
print("Continuing")
exit_event = m5.simulate()
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
print("")
print("Performance statistics")
print("Ran a total of", m5.curTick() / 1e12, "simulated seconds")
print("Total wallclock time: %.2fs, %.2f min" % \
(time.time()-globalStart, (time.time()-globalStart)/60))
if foundROI:
print("Simulated time in ROI: %.2fs" %
((end_tick - start_tick) / 1e12))
print("Instructions executed in ROI: %d" % ((end_insts - start_insts)))
