def run_test(root, switcher=None, freq=1000):
"""Test runner for CPU switcheroo tests.
The switcheroo test runner is used to switch CPUs in a system that
has been prepared for CPU switching. Such systems should have
multiple CPUs when they are instantiated, but only one should be
switched in. Such configurations can be created using the
base_config.BaseFSSwitcheroo class.
A CPU switcher object is used to control switching. The default
switcher sequentially switches between all CPUs in a system,
starting with the CPU that is currently switched in.
Unlike most other test runners, this one automatically configures
the memory mode of the system based on the first CPU the switcher
reports.
Keyword Arguments:
switcher -- CPU switcher implementation. See Sequential for
an example implementation.
period -- Switching frequency in Hz.
"""
if switcher == None:
switcher = Sequential(root.system.cpu)
current_cpu = switcher.first()
system = root.system
system.mem_mode = type(current_cpu).memory_mode()
# instantiate configuration
m5.instantiate()
# Determine the switching period, this has to be done after
# instantiating the system since the time base must be fixed.
period = m5.ticks.fromSeconds(1.0 / freq)
while True:
exit_event = m5.simulate(period)
exit_cause = exit_event.getCause()
if exit_cause == "simulate() limit reached":
next_cpu = switcher.next()
print "Switching CPUs..."
print "Next CPU: %s" % type(next_cpu)
m5.drain(system)
if current_cpu != next_cpu:
m5.switchCpus(system, [(current_cpu, next_cpu)],
do_drain=False)
else:
print "Source CPU and destination CPU are the same, skipping..."
m5.resume(system)
current_cpu = next_cpu
elif exit_cause == "target called exit()" or \
exit_cause == "m5_exit instruction encountered":
sys.exit(0)
else:
print "Test failed: Unknown exit cause: %s" % exit_cause
sys.exit(1)
def run_test(root, switcher=None, freq=1000):
"""Test runner for CPU switcheroo tests.
The switcheroo test runner is used to switch CPUs in a system that
has been prepared for CPU switching. Such systems should have
multiple CPUs when they are instantiated, but only one should be
switched in. Such configurations can be created using the
base_config.BaseFSSwitcheroo class.
A CPU switcher object is used to control switching. The default
switcher sequentially switches between all CPUs in a system,
starting with the CPU that is currently switched in.
Unlike most other test runners, this one automatically configures
the memory mode of the system based on the first CPU the switcher
reports.
Keyword Arguments:
switcher -- CPU switcher implementation. See Sequential for
an example implementation.
period -- Switching frequency in Hz.
"""
if switcher == None:
switcher = Sequential(root.system.cpu)
current_cpu = switcher.first()
system = root.system
system.mem_mode = type(current_cpu).memory_mode()
# instantiate configuration
m5.instantiate()
# Determine the switching period, this has to be done after
# instantiating the system since the time base must be fixed.
period = m5.ticks.fromSeconds(1.0 / freq)
while True:
exit_event = m5.simulate(period)
exit_cause = exit_event.getCause()
if exit_cause == "simulate() limit reached":
next_cpu = switcher.next()
print "Switching CPUs..."
print "Next CPU: %s" % type(next_cpu)
m5.drain(system)
if current_cpu != next_cpu:
m5.switchCpus(system, [ (current_cpu, next_cpu) ],
do_drain=False)
else:
print "Source CPU and destination CPU are the same, skipping..."
m5.resume(system)
current_cpu = next_cpu
elif exit_cause == "target called exit()" or \
exit_cause == "m5_exit instruction encountered":
sys.exit(0)
else:
print "Test failed: Unknown exit cause: %s" % exit_cause
sys.exit(1)
def repeatSwitch(testsys, repeat_switch_cpu_list, maxtick, switch_freq):
print "starting switch loop"
while True:
exit_event = m5.simulate(switch_freq)
exit_cause = exit_event.getCause()
if exit_cause != "simulate() limit reached":
return exit_cause
print "draining the system"
m5.drain(testsys)
m5.switchCpus(repeat_switch_cpu_list)
m5.resume(testsys)
tmp_cpu_list = []
for old_cpu, new_cpu in repeat_switch_cpu_list:
tmp_cpu_list.append((new_cpu, old_cpu))
repeat_switch_cpu_list = tmp_cpu_list
if (maxtick - m5.curTick()) <= switch_freq:
exit_event = m5.simulate(maxtick - m5.curTick())
return exit_event.getCause()
def run_test(root, switcher=None, freq=1000, verbose=False):
"""Test runner for CPU switcheroo tests.
The switcheroo test runner is used to switch CPUs in a system that
has been prepared for CPU switching. Such systems should have
multiple CPUs when they are instantiated, but only one should be
switched in. Such configurations can be created using the
base_config.BaseFSSwitcheroo class.
A CPU switcher object is used to control switching. The default
switcher sequentially switches between all CPUs in a system,
starting with the CPU that is currently switched in.
Unlike most other test runners, this one automatically configures
the memory mode of the system based on the first CPU the switcher
reports.
Keyword Arguments:
switcher -- CPU switcher implementation. See Sequential for
an example implementation.
period -- Switching frequency in Hz.
verbose -- Enable output at each switch (suppressed by default).
"""
if switcher == None:
switcher = Sequential(root.system.cpu)
current_cpu = switcher.first()
system = root.system
system.mem_mode = type(current_cpu).memory_mode()
# Suppress "Entering event queue" messages since we get tons of them.
# Worse yet, they include the timestamp, which makes them highly
# variable and unsuitable for comparing as test outputs.
if not verbose:
_m5.core.setLogLevel(_m5.core.LogLevel.WARN)
# instantiate configuration
m5.instantiate()
# Determine the switching period, this has to be done after
# instantiating the system since the time base must be fixed.
period = m5.ticks.fromSeconds(1.0 / freq)
while True:
exit_event = m5.simulate(period)
exit_cause = exit_event.getCause()
if exit_cause == "simulate() limit reached":
next_cpu = switcher.next()
if verbose:
print("Switching CPUs...")
print("Next CPU: %s" % type(next_cpu))
m5.drain()
if current_cpu != next_cpu:
m5.switchCpus(system, [ (current_cpu, next_cpu) ],
verbose=verbose)
else:
print("Source CPU and destination CPU are the same,"
" skipping...")
current_cpu = next_cpu
elif exit_cause == "target called exit()" or \
exit_cause == "m5_exit instruction encountered":
sys.exit(0)
else:
print("Test failed: Unknown exit cause: %s" % exit_cause)
sys.exit(1)
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [
cpu_class(defer_registration=True, cpu_id=(np + i))
for i in xrange(np)
]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
switch_cpus = [
TimingSimpleCPU(defer_registration=True, cpu_id=(np + i))
for i in xrange(np)
]
switch_cpus_1 = [
DerivO3CPU(defer_registration=True, cpu_id=(2 * np + i))
for i in xrange(np)
]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
switch_cpus_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i])
for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal('Unable to find simpoint')
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir,
"cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile('cpt\.([0-9]*)')
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a, b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal('Checkpoint %d not found', cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ''
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None:
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == \
"a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause()
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause()
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
exit_event = m5.simulate(maxtick)
while exit_event.getCause() == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
if exit_cause == '':
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
# NOTE: this function is called from example from configs/example/ruby_fs.py
# like this: "Simulation.run(options, root, system, FutureClass)"
# so, "system" is "testsys" here;
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(defer_registration=True, cpu_id=(np+i))
for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
if not buildEnv['FULL_SYSTEM']:
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(np+i))
for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(defer_registration=True, cpu_id=(2*np+i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
if not buildEnv['FULL_SYSTEM']:
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
switch_cpus_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal('Unable to find simpoint')
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir,
"cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile('cpt\.([0-9]*)')
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a,b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal('Checkpoint %d not found', cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ''
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None :
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == \
"a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause();
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause();
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
#exit_event = m5.simulate(maxtick)
# --Note1: Ruby is created in ruby_fs.py by
# "Ruby.create_system(options, system, system.piobus, system._dma_devices)"
# which assigned: "stats_filename = options.ruby_stats";
# definition of "create_system" is in configs/ruby/Ruby.py, which
# instantiate the ctor of RubySystem: "system.ruby = RubySystem(...)";
#print testsys.ruby._cpu_ruby_ports
#print testsys.ruby.network.ni_flit_size
#print testsys.ruby.profiler.ruby_system
# the ctor of RubySystem is defined in src/mem/ruby/system/RubySystem.py;
# which sets some defaults:
#print testsys.ruby.stats_filename # i.e., ruby.stats
#print testsys.ruby.type
#print testsys.ruby.random_seed
#print testsys.ruby.clock
#print testsys.ruby.block_size_bytes
#print testsys.ruby.mem_size
#print testsys.ruby.no_mem_vec
# () cris: description of changes
# --Note2: initially writing into ruby.stats was done with overwriting;
# so, for each dump point the file was re-written; to fix that I
# changed function "OutputDirectory::create(...)" from src/base/output.cc
# which is called by "RubyExitCallback::process()" from src/mem/ruby/system/System.cc
# function that is the one called at the end of the gem5 run
# as a calback to dump all ruby stats (callback is "registered" in the
# ctor of RubySystem::RubySystem() inside the same file...);
# --Note3: using doExitCleanup inspired from src/python/m5/simulate.py
# (inside which ini and json files are created; you need to rebuild each
# time you change that Python file):
#m5.internal.core.doExitCleanup( False) #clear callback queue?
# --Note4: python/m5/internal/core.py describes "m5.internal.core";
# cris: here I want to dump stats every other delta ticks;
# I need these to be able to generate reliability traces;
NUM_OF_DUMPS = 100
num_i = 0
delta = maxtick/NUM_OF_DUMPS
sim_ticks = m5.curTick()
while (m5.curTick() < maxtick):
sim_ticks += delta
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
#--Note5: "doExitCleanup()" is described in src/sim/core.cc;
# I changed it to be able to call it multiple times;
#--Note6: do not dump stats in ruby.stats for last iteration
# because it will be repeated once more via the exit callbacks
# in src/python/m5/simulate.py...
# Note6: next call of doExitCleanup does actually also reset/clear
# the stats of ruby system via the RubyExitCallback::process() in
# src/mem/ruby/system/System.cc
if num_i < (NUM_OF_DUMPS-1):
print "Dumping also ruby stats at inst %d to file: ruby.stats" %(num_i)
m5.internal.core.doExitCleanup( False) #clear callback queue?
print "Dumping gem5 stats at inst %d to file: stats.txt" %(num_i)
# --Note7: dump() wites into stats.txt; dump() is defined in
# src/python/m5/stats/__init__.py and does its
# thing via the functions described in base/stats/text.cc
#atexit.register(stats.dump) <--- does not work (from simulate.py)
m5.stats.dump()
m5.stats.reset() # <--- what does it actually do?
num_i += 1
# alex's changes:
#while exit_event.getCause() != "m5_exit instruction encountered":
# m5.stats.dump()
# m5.stats.reset()
# exit_event = m5.simulate(maxtick)
#while exit_event.getCause() == "checkpoint":
# m5.checkpoint(joinpath(cptdir, "cpt.%d"))
# num_checkpoints += 1
# if num_checkpoints == max_checkpoints:
# exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
# break
# exit_event = m5.simulate(maxtick - m5.curTick())
# exit_cause = exit_event.getCause()
if exit_cause == '':
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run_test(root, switcher=None, freq=1000, verbose=False):
"""Test runner for CPU switcheroo tests.
The switcheroo test runner is used to switch CPUs in a system that
has been prepared for CPU switching. Such systems should have
multiple CPUs when they are instantiated, but only one should be
switched in. Such configurations can be created using the
base_config.BaseFSSwitcheroo class.
A CPU switcher object is used to control switching. The default
switcher sequentially switches between all CPUs in a system,
starting with the CPU that is currently switched in.
Unlike most other test runners, this one automatically configures
the memory mode of the system based on the first CPU the switcher
reports.
Keyword Arguments:
switcher -- CPU switcher implementation. See Sequential for
an example implementation.
period -- Switching frequency in Hz.
verbose -- Enable output at each switch (suppressed by default).
"""
if switcher == None:
switcher = Sequential(root.system.cpu)
current_cpu = switcher.first()
system = root.system
system.mem_mode = type(current_cpu).memory_mode()
# Suppress "Entering event queue" messages since we get tons of them.
# Worse yet, they include the timestamp, which makes them highly
# variable and unsuitable for comparing as test outputs.
if not verbose:
_m5.core.setLogLevel(_m5.core.LogLevel.WARN)
# instantiate configuration
m5.instantiate()
# Determine the switching period, this has to be done after
# instantiating the system since the time base must be fixed.
period = m5.ticks.fromSeconds(1.0 / freq)
while True:
exit_event = m5.simulate(period)
exit_cause = exit_event.getCause()
if exit_cause == "simulate() limit reached":
next_cpu = switcher.next()
if verbose:
print "Switching CPUs..."
print "Next CPU: %s" % type(next_cpu)
m5.drain()
if current_cpu != next_cpu:
m5.switchCpus(system, [(current_cpu, next_cpu)],
verbose=verbose)
else:
print "Source CPU and destination CPU are the same, skipping..."
current_cpu = next_cpu
elif exit_cause == "target called exit()" or \
exit_cause == "m5_exit instruction encountered":
sys.exit(0)
else:
print "Test failed: Unknown exit cause: %s" % exit_cause
sys.exit(1)
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
new = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
new = [cpu_class(defer_registration=True, cpu_id=(np + i)) for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
new[i].system = testsys
if not buildEnv["FULL_SYSTEM"]:
new[i].workload = testsys.cpu[i].workload
new[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
new[i].max_insts_any_thread = options.maxinsts
testsys.new = new
switch_cpu_list = [(testsys.cpu[i], new[i]) for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
new = [TimingSimpleCPU(defer_registration=True, cpu_id=(np + i)) for i in xrange(np)]
new_1 = [DerivO3CPU(defer_registration=True, cpu_id=(2 * np + i)) for i in xrange(np)]
for i in xrange(np):
new[i].system = testsys
new_1[i].system = testsys
if not buildEnv["FULL_SYSTEM"]:
new[i].workload = testsys.cpu[i].workload
new_1[i].workload = testsys.cpu[i].workload
new[i].clock = testsys.cpu[0].clock
new_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal("simpoint not found")
testsys.cpu[i].max_insts_any_thread = testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
new[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
new_1[i].max_insts_any_thread = options.maxinsts
testsys.new = new
testsys.new_1 = new_1
switch_cpu_list = [(testsys.cpu[i], new[i]) for i in xrange(np)]
switch_cpu_list1 = [(new[i], new_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and (options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal("no simpoint for testsys.cpu[%d].workload[0]", i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal("Unable to find simpoint")
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir, "cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile("cpt\.([0-9]*)")
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a, b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal("Checkpoint %d not found", cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % (testsys.new[0].max_insts_any_thread)
# warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % (testsys.new_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ""
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None:
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == "a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % (options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause()
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause()
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
exit_event = m5.simulate(maxtick)
while exit_event.getCause() == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
if exit_cause == "":
exit_cause = exit_event.getCause()
print "Exiting @ tick %i because %s" % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [
cpu_class(defer_registration=True, cpu_id=(i)) for i in xrange(np)
]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
if options.repeat_switch:
if options.cpu_type == "arm_detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [O3_ARM_v7a_3(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [DerivO3CPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "inorder":
print "inorder CPU switching not supported"
sys.exit(1)
elif options.cpu_type == "timing":
repeat_switch_cpus = [TimingSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
else:
repeat_switch_cpus = [AtomicSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clock = testsys.cpu[i].clock
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
switch_cpus = [
TimingSimpleCPU(defer_registration=True, cpu_id=(i))
for i in xrange(np)
]
switch_cpus_1 = [
DerivO3CPU(defer_registration=True, cpu_id=(i)) for i in xrange(np)
]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
switch_cpus_1[i].clock = testsys.cpu[i].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i])
for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
maxtick, checkpoint_dir = findCptDir(options, maxtick, cptdir, testsys)
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None:
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_cause = scriptCheckpoints(options, maxtick, cptdir)
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_cause = repeatSwitch(testsys, repeat_switch_cpu_list, maxtick,
options.repeat_switch)
else:
exit_cause = benchCheckpoints(options, maxtick, cptdir)
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(defer_registration=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.repeat_switch:
if options.cpu_type == "arm_detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [O3_ARM_v7a_3(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [DerivO3CPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "inorder":
print "inorder CPU switching not supported"
sys.exit(1)
elif options.cpu_type == "timing":
repeat_switch_cpus = [TimingSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
else:
repeat_switch_cpus = [AtomicSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clock = testsys.cpu[i].clock
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(i))
for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(defer_registration=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
switch_cpus_1[i].clock = testsys.cpu[i].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
maxtick, checkpoint_dir = findCptDir(options, maxtick, cptdir, testsys)
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None :
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_cause = scriptCheckpoints(options)
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_cause = repeatSwitch(testsys, repeat_switch_cpu_list,
maxtick, options.repeat_switch)
else:
exit_cause = benchCheckpoints(options, maxtick, cptdir)
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
