def _process(self, mlist, msg, msgdata):
"""See `TerminalChainBase`."""
# Start by decorating the message with a header that contains a list
# of all the rules that matched. These metadata could be None or an
# empty list.
rule_hits = msgdata.get('rule_hits')
if rule_hits:
msg['X-Mailman-Rule-Hits'] = SEMISPACE.join(rule_hits)
rule_misses = msgdata.get('rule_misses')
if rule_misses:
msg['X-Mailman-Rule-Misses'] = SEMISPACE.join(rule_misses)
# Hold the message by adding it to the list's request database.
request_id = hold_message(mlist, msg, msgdata, None)
# Calculate a confirmation token to send to the author of the
# message.
pendable = HeldMessagePendable(type=HeldMessagePendable.PEND_KEY,
id=request_id)
token = getUtility(IPendings).add(pendable)
# Get the language to send the response in. If the sender is a
# member, then send it in the member's language, otherwise send it in
# the mailing list's preferred language.
member = mlist.members.get_member(msg.sender)
language = (member.preferred_language
if member else mlist.preferred_language)
# A substitution dictionary for the email templates.
charset = mlist.preferred_language.charset
original_subject = msg.get('subject')
if original_subject is None:
original_subject = _('(no subject)')
else:
original_subject = oneline(original_subject, in_unicode=True)
substitutions = dict(
listname = mlist.fqdn_listname,
subject = original_subject,
sender = msg.sender,
reasons = _compose_reasons(msgdata),
)
# At this point the message is held, but now we have to craft at least
# two responses. The first will go to the original author of the
# message and it will contain the token allowing them to approve or
# discard the message. The second one will go to the moderators of
# the mailing list, if the list is so configured.
#
# Start by possibly sending a response to the message author. There
# are several reasons why we might not go through with this. If the
# message was gated from NNTP, the author may not even know about this
# list, so don't spam them. If the author specifically requested that
# acknowledgments not be sent, or if the message was bulk email, then
# we do not send the response. It's also possible that either the
# mailing list, or the author (if they are a member) have been
# configured to not send such responses.
if (not msgdata.get('fromusenet') and
can_acknowledge(msg) and
mlist.respond_to_post_requests and
autorespond_to_sender(mlist, msg.sender, language)):
# We can respond to the sender with a message indicating their
# posting was held.
subject = _(
'Your message to $mlist.fqdn_listname awaits moderator approval')
send_language_code = msgdata.get('lang', language.code)
text = make('postheld.txt',
mailing_list=mlist,
language=send_language_code,
**substitutions)
adminaddr = mlist.bounces_address
nmsg = UserNotification(
msg.sender, adminaddr, subject, text,
getUtility(ILanguageManager)[send_language_code])
nmsg.send(mlist)
# Now the message for the list moderators. This one should appear to
# come from <list>-owner since we really don't need to do bounce
# processing on it.
if mlist.admin_immed_notify:
# Now let's temporarily set the language context to that which the
# administrators are expecting.
with _.using(mlist.preferred_language.code):
language = mlist.preferred_language
charset = language.charset
substitutions['subject'] = original_subject
# We need to regenerate or re-translate a few values in the
# substitution dictionary.
substitutions['reasons'] = _compose_reasons(msgdata, 55)
# craft the admin notification message and deliver it
subject = _(
'$mlist.fqdn_listname post from $msg.sender requires '
'approval')
nmsg = UserNotification(mlist.owner_address,
mlist.owner_address,
subject, lang=language)
nmsg.set_type('multipart/mixed')
text = MIMEText(make('postauth.txt',
mailing_list=mlist,
wrap=False,
**substitutions),
_charset=charset)
dmsg = MIMEText(wrap(_("""\
If you reply to this message, keeping the Subject: header intact, Mailman will
discard the held message. Do this if the message is spam. If you reply to
this message and include an Approved: header with the list password in it, the
message will be approved for posting to the list. The Approved: header can
also appear in the first line of the body of the reply.""")),
_charset=language.charset)
dmsg['Subject'] = 'confirm ' + token
dmsg['From'] = mlist.request_address
dmsg['Date'] = formatdate(localtime=True)
dmsg['Message-ID'] = make_msgid()
nmsg.attach(text)
nmsg.attach(MIMEMessage(msg))
nmsg.attach(MIMEMessage(dmsg))
nmsg.send(mlist, **dict(tomoderators=True))
# Log the held message. Log messages are not translated, so recast
# the reasons in the English.
with _.using('en'):
reasons = _compose_reasons(msgdata)
log.info('HOLD: %s post from %s held, message-id=%s: %s',
mlist.fqdn_listname, msg.sender,
msg.get('message-id', 'n/a'), SEMISPACE.join(reasons))
notify(HoldEvent(mlist, msg, msgdata, self))
def _process(self, mlist, msg, msgdata):
"""See `TerminalChainBase`."""
# Start by decorating the message with a header that contains a list
# of all the rules that matched. These metadata could be None or an
# empty list.
rule_hits = msgdata.get('rule_hits')
if rule_hits:
msg['X-Mailman-Rule-Hits'] = SEMISPACE.join(rule_hits)
rule_misses = msgdata.get('rule_misses')
if rule_misses:
msg['X-Mailman-Rule-Misses'] = SEMISPACE.join(rule_misses)
# Hold the message by adding it to the list's request database.
request_id = hold_message(mlist, msg, msgdata, None)
# Calculate a confirmation token to send to the author of the
# message.
pendable = HeldMessagePendable(id=request_id)
token = getUtility(IPendings).add(pendable)
# Get the language to send the response in. If the sender is a
# member, then send it in the member's language, otherwise send it in
# the mailing list's preferred language.
member = mlist.members.get_member(msg.sender)
language = (member.preferred_language
if member else mlist.preferred_language)
# A substitution dictionary for the email templates.
charset = mlist.preferred_language.charset
original_subject = msg.get('subject')
if original_subject is None:
original_subject = _('(no subject)')
else:
# This must be encoded to the mailing list's perferred charset,
# ignoring incompatible characters, otherwise when creating the
# notification messages, we could get a Unicode error.
oneline_subject = oneline(original_subject, in_unicode=True)
bytes_subject = oneline_subject.encode(charset, 'replace')
original_subject = bytes_subject.decode(charset)
substitutions = dict(
subject=original_subject,
sender_email=msg.sender,
reasons=_compose_reasons(msgdata),
# For backward compatibility.
sender=msg.sender,
)
# At this point the message is held, but now we have to craft at least
# two responses. The first will go to the original author of the
# message and it will contain the token allowing them to approve or
# discard the message. The second one will go to the moderators of
# the mailing list, if the list is so configured.
#
# Start by possibly sending a response to the message author. There
# are several reasons why we might not go through with this. If the
# message was gated from NNTP, the author may not even know about this
# list, so don't spam them. If the author specifically requested that
# acknowledgments not be sent, or if the message was bulk email, then
# we do not send the response. It's also possible that either the
# mailing list, or the author (if they are a member) have been
# configured to not send such responses.
if (not msgdata.get('fromusenet') and
can_acknowledge(msg) and
mlist.respond_to_post_requests and
autorespond_to_sender(mlist, msg.sender, language)):
# We can respond to the sender with a message indicating their
# posting was held.
subject = _(
'Your message to $mlist.fqdn_listname awaits moderator approval')
send_language_code = msgdata.get('lang', language.code)
template = getUtility(ITemplateLoader).get(
'list:user:notice:hold', mlist,
language=send_language_code)
text = wrap(expand(template, mlist, dict(
language=send_language_code,
**substitutions)))
adminaddr = mlist.bounces_address
nmsg = UserNotification(
msg.sender, adminaddr, subject, text,
getUtility(ILanguageManager)[send_language_code])
nmsg.send(mlist)
# Now the message for the list moderators. This one should appear to
# come from <list>-owner since we really don't need to do bounce
# processing on it.
if mlist.admin_immed_notify:
# Now let's temporarily set the language context to that which the
# administrators are expecting.
with _.using(mlist.preferred_language.code):
language = mlist.preferred_language
charset = language.charset
substitutions['subject'] = original_subject
# We need to regenerate or re-translate a few values in the
# substitution dictionary.
substitutions['reasons'] = _compose_reasons(msgdata, 55)
# craft the admin notification message and deliver it
subject = _(
'$mlist.fqdn_listname post from $msg.sender requires '
'approval')
nmsg = UserNotification(mlist.owner_address,
mlist.owner_address,
subject, lang=language)
nmsg.set_type('multipart/mixed')
template = getUtility(ITemplateLoader).get(
'list:admin:action:post', mlist)
text = MIMEText(expand(template, mlist, substitutions),
_charset=charset)
dmsg = MIMEText(wrap(_("""\
If you reply to this message, keeping the Subject: header intact, Mailman will
discard the held message. Do this if the message is spam. If you reply to
this message and include an Approved: header with the list password in it, the
message will be approved for posting to the list. The Approved: header can
also appear in the first line of the body of the reply.""")),
_charset=language.charset)
dmsg['Subject'] = 'confirm ' + token
dmsg['From'] = mlist.request_address
dmsg['Date'] = formatdate(localtime=True)
dmsg['Message-ID'] = make_msgid()
nmsg.attach(text)
nmsg.attach(MIMEMessage(msg))
nmsg.attach(MIMEMessage(dmsg))
nmsg.send(mlist, **dict(tomoderators=True))
# Log the held message. Log messages are not translated, so recast
# the reasons in the English.
with _.using('en'):
reasons = msgdata.get('moderation_reasons', ['N/A'])
log.info('HOLD: %s post from %s held, message-id=%s: %s',
mlist.fqdn_listname, msg.sender,
msg.get('message-id', 'n/a'), SEMISPACE.join(reasons))
notify(HoldEvent(mlist, msg, msgdata, self))