async def handle_upload(self, offset, total_size, data):
from main import dis, sf, hsm_active
from utils import check_firmware_hdr
from sigheader import FW_HEADER_OFFSET, FW_HEADER_SIZE
# maintain a running SHA256 over what's received
if offset == 0:
self.file_checksum = tcc.sha256()
assert offset % 256 == 0, 'alignment'
assert offset + len(data) <= total_size <= MAX_UPLOAD_LEN, 'long'
if hsm_active:
# additional restrictions in HSM mode
assert offset + len(data) <= total_size <= MAX_TXN_LEN, 'psbt'
if offset == 0:
assert data[0:5] == b'psbt\xff', 'psbt'
for pos in range(offset, offset + len(data), 256):
if pos % 4096 == 0:
# erase here
dis.fullscreen("Receiving...", offset / total_size)
sf.sector_erase(pos)
while sf.is_busy():
await sleep_ms(10)
# write up to 256 bytes
here = data[pos - offset:pos - offset + 256]
self.file_checksum.update(here)
# Very special case for firmware upgrades: intercept and modify
# header contents on the fly, and also fail faster if wouldn't work
# on this specific hardware.
# - workaround: ckcc-protocol upgrade process understates the file
# length and appends hdr, but that's kinda a bug, so support both
if (pos == (FW_HEADER_OFFSET & ~255)
or pos == (total_size - FW_HEADER_SIZE)
or pos == total_size):
prob = check_firmware_hdr(memoryview(here)[-128:],
None,
bad_magic_ok=True)
if prob:
raise ValueError(prob)
sf.write(pos, here)
# full page write: 0.6 to 3ms
while sf.is_busy():
await sleep_ms(1)
if offset + len(data) >= total_size and not hsm_active:
# probably done
dis.progress_bar_show(1.0)
ux.restore_menu()
return offset
async def test_sflash():
dis.clear()
dis.text(None, 18, 'Serial Flash')
dis.show()
#if ckcc.is_simulator(): return
from main import sf
from ustruct import pack
import tcc
msize = 1024 * 1024
sf.chip_erase()
for phase in [0, 1]:
steps = 7 * 4
for i in range(steps):
dis.progress_bar(i / steps)
dis.show()
await sleep_ms(250)
if not sf.is_busy(): break
assert not sf.is_busy(), "sflash erase didn't finish"
# leave chip blank
if phase == 1: break
buf = bytearray(32)
for addr in range(0, msize, 1024):
sf.read(addr, buf)
assert set(buf) == {255}, "sflash not blank:" + repr(buf)
rnd = tcc.sha256(pack('I', addr)).digest()
sf.write(addr, rnd)
sf.read(addr, buf)
assert buf == rnd, "sflash write failed"
dis.progress_bar_show(addr / msize)
# check no aliasing, also right size part
for addr in range(0, msize, 1024):
expect = tcc.sha256(pack('I', addr)).digest()
sf.read(addr, buf)
assert buf == expect, "sflash readback failed"
dis.progress_bar_show(addr / msize)
async def handle_upload(self, offset, total_size, data):
from main import dis, sf
# maintain a running SHA256 over what's received
if offset == 0:
self.file_checksum = tcc.sha256()
assert offset % 256 == 0, 'alignment'
assert offset + len(data) <= total_size <= MAX_UPLOAD_LEN, 'long'
rb = bytearray(256)
for pos in range(offset, offset + len(data), 256):
if pos % 4096 == 0:
# erase here
sf.sector_erase(pos)
dis.fullscreen("Receiving...")
dis.progress_bar_show(offset / total_size)
while sf.is_busy():
await sleep_ms(10)
# write up to 256 bytes
here = data[pos - offset:pos - offset + 256]
sf.write(pos, here)
# full page write: 0.6 to 3ms
while sf.is_busy():
await sleep_ms(1)
# use actual read back for verify
sf.read(pos, rb)
self.file_checksum.update(rb[0:len(here)])
if offset + len(data) >= total_size:
# probably done
dis.progress_bar_show(1.0)
ux.restore_menu()
return offset
async def microsd_upgrade(*a):
# Upgrade vis MicroSD card
# - search for a particular file
# - verify it lightly
# - erase serial flash
# - copy it over (slow)
# - reboot into bootloader, which finishes install
fn = await file_picker('Pick firmware image to use (.DFU)',
suffix='.dfu',
min_size=0x7800)
if not fn: return
failed = None
with CardSlot() as card:
with open(fn, 'rb') as fp:
from main import sf, dis
from files import dfu_parse
from ustruct import unpack_from
offset, size = dfu_parse(fp)
# get a copy of special signed heaer at the end of the flash as well
from sigheader import FW_HEADER_OFFSET, FW_HEADER_SIZE, FW_HEADER_MAGIC, FWH_PY_FORMAT
hdr = bytearray(FW_HEADER_SIZE)
fp.seek(offset + FW_HEADER_OFFSET)
# basic checks only: for confused customers, not attackers.
try:
rv = fp.readinto(hdr)
assert rv == FW_HEADER_SIZE
magic_value, timestamp, version_string, pk, fw_size = \
unpack_from(FWH_PY_FORMAT, hdr)[0:5]
assert magic_value == FW_HEADER_MAGIC
assert fw_size == size
# TODO: maybe show the version string? Warn them that downgrade doesn't work?
except Exception as exc:
failed = "Sorry! That does not look like a firmware " \
"file we would want to use.\n\n\n%s" % exc
if not failed:
# copy binary into serial flash
fp.seek(offset)
buf = bytearray(256) # must be flash page size
pos = 0
dis.fullscreen("Loading...")
while pos <= size + FW_HEADER_SIZE:
dis.progress_bar_show(pos / size)
if pos == size:
# save an extra copy of the header (also means we got done)
buf = hdr
else:
here = fp.readinto(buf)
if not here: break
if pos % 4096 == 0:
# erase here
sf.sector_erase(pos)
while sf.is_busy():
await sleep_ms(10)
sf.write(pos, buf)
# full page write: 0.6 to 3ms
while sf.is_busy():
await sleep_ms(1)
pos += here
if failed:
await ux_show_story(failed, title='Corrupt')
return
# continue process...
import machine
machine.reset()
async def microsd_upgrade(*a):
# Upgrade vis MicroSD card
# - search for a particular file
# - verify it lightly
# - erase serial flash
# - copy it over (slow)
# - reboot into bootloader, which finishes install
fn = await file_picker('Pick firmware image to use (.DFU)', suffix='.dfu', min_size=0x7800)
if not fn: return
failed = None
with CardSlot() as card:
with open(fn, 'rb') as fp:
from main import sf, dis
from files import dfu_parse
from utils import check_firmware_hdr
offset, size = dfu_parse(fp)
# we also put a copy of special signed heaer at the end of the flash
from sigheader import FW_HEADER_OFFSET, FW_HEADER_SIZE
# read just the signature header
hdr = bytearray(FW_HEADER_SIZE)
fp.seek(offset + FW_HEADER_OFFSET)
rv = fp.readinto(hdr)
assert rv == FW_HEADER_SIZE
# check header values
failed = check_firmware_hdr(hdr, size)
if not failed:
patched = 0
# copy binary into serial flash
fp.seek(offset)
buf = bytearray(256) # must be flash page size
pos = 0
dis.fullscreen("Loading...")
while pos <= size + FW_HEADER_SIZE:
dis.progress_bar_show(pos/size)
if pos == size:
# save an extra copy of the header (also means we got done)
buf = hdr
patched += 1
else:
here = fp.readinto(buf)
if not here: break
if pos == (FW_HEADER_OFFSET & ~255):
# update w/ our patched version of hdr
buf[128:FW_HEADER_SIZE+128] = hdr
patched += 1
if pos % 4096 == 0:
# erase here
sf.sector_erase(pos)
while sf.is_busy():
await sleep_ms(10)
sf.write(pos, buf)
# full page write: 0.6 to 3ms
while sf.is_busy():
await sleep_ms(1)
pos += here
assert patched == 2
if failed:
await ux_show_story(failed, title='Sorry!')
return
# continue process...
import machine
machine.reset()
