def hazus_liq(shakefile,
config,
uncertfile=None,
saveinputs=False,
modeltype=None,
displmodel=None,
probtype=None,
bounds=None):
"""
Method for computing the probability of liquefaction using the Hazus method
using the Wills et al. (2015) Vs30 map of California to define the
susceptibility classes and the Fan et al. global water table model.
"""
layers = config['hazus_liq_cal']['layers']
vs30_file = layers['vs30']['file']
wtd_file = layers['watertable']['file']
shkgdict = ShakeGrid.getFileGeoDict(shakefile)
fgeodict = GMTGrid.getFileGeoDict(vs30_file)[0]
#---------------------------------------------------------------------------
# Loading
#---------------------------------------------------------------------------
shakemap = ShakeGrid.load(shakefile,
fgeodict,
resample=True,
method='linear',
doPadding=True)
PGA = shakemap.getLayer('pga').getData() / 100 # convert to g
griddict, eventdict, specdict, fields, uncertainties = getHeaderData(
shakefile)
mag = eventdict['magnitude']
# Correction factor for moment magnitudes other than M=7.5
k_m = 0.0027 * mag**3 - 0.0267 * mag**2 - 0.2055 * mag + 2.9188
#---------------------------------------------------------------------------
# Susceptibility from Vs30
#---------------------------------------------------------------------------
vs30_grid = GMTGrid.load(vs30_file)
vs30 = vs30_grid.getData()
p_ml = np.zeros_like(vs30)
a = np.zeros_like(vs30)
b = np.zeros_like(vs30)
for k, v in config['hazus_liq_cal']['parameters'].items():
ind = np.where(vs30 == float(v[0]))
if v[1] == "VH":
p_ml[ind] = 0.25
a[ind] = 9.09
b[ind] = -0.82
if v[1] == "H":
p_ml[ind] = 0.2
a[ind] = 7.67
b[ind] = -0.92
if v[1] == "M":
p_ml[ind] = 0.1
a[ind] = 6.67
b[ind] = -1.0
if v[1] == "L":
p_ml[ind] = 0.05
a[ind] = 5.57
b[ind] = -1.18
if v[1] == "VL":
p_ml[ind] = 0.02
a[ind] = 4.16
b[ind] = -1.08
# Conditional liquefaction probability for a given susceptibility category
# at a specified PGA
p_liq_pga = a * PGA + b
p_liq_pga = p_liq_pga.clip(min=0, max=1)
#---------------------------------------------------------------------------
# Water table
#---------------------------------------------------------------------------
wtd_grid = GMTGrid.load(wtd_file,
fgeodict,
resample=True,
method=layers['watertable']['interpolation'],
doPadding=True)
tmp = wtd_grid._data
tmp = np.nan_to_num(tmp)
# Convert to ft
wt_ft = tmp * 3.28084
# Correction factor for groundwater depths other than five feet
k_w = 0.022 * wt_ft + 0.93
#---------------------------------------------------------------------------
# Combine to get conditional liquefaction probability
#---------------------------------------------------------------------------
p_liq_sc = p_liq_pga * p_ml / k_m / k_w
#---------------------------------------------------------------------------
# Turn output and inputs into into grids and put in maplayers dictionary
#---------------------------------------------------------------------------
maplayers = collections.OrderedDict()
temp = shakemap.getShakeDict()
shakedetail = '%s_ver%s' % (temp['shakemap_id'], temp['shakemap_version'])
modelsref = config['hazus_liq_cal']['shortref']
modellref = config['hazus_liq_cal']['longref']
modeltype = 'Hazus/Wills'
maplayers['model'] = {
'grid': GDALGrid(p_liq_sc, fgeodict),
'label': 'Probability',
'type': 'output',
'description': {
'name': modelsref,
'longref': modellref,
'units': 'coverage',
'shakemap': shakedetail,
'parameters': {
'modeltype': modeltype
}
}
}
if saveinputs is True:
maplayers['pga'] = {
'grid': GDALGrid(PGA, fgeodict),
'label': 'PGA (g)',
'type': 'input',
'description': {
'units': 'g',
'shakemap': shakedetail
}
}
maplayers['vs30'] = {
'grid': GDALGrid(vs30, fgeodict),
'label': 'Vs30 (m/s)',
'type': 'input',
'description': {
'units': 'm/s'
}
}
maplayers['wtd'] = {
'grid': GDALGrid(wtd_grid._data, fgeodict),
'label': 'wtd (m)',
'type': 'input',
'description': {
'units': 'm'
}
}
return maplayers
def run_gfail(args):
"""Runs ground failure.
Args:
args: dictionary or argument parser Namespace output by bin/gfail
program.
Returns:
list: Names of created files.
"""
# TODO: ADD CONFIG VALIDATION STEP THAT MAKES SURE ALL THE FILES EXIST
filenames = []
# If args is a dictionary, convert to a Namespace
if isinstance(args, dict):
args = Namespace(**args)
if args.set_default_paths:
set_default_paths(args)
print('default paths set, continuing...\n')
if args.list_default_paths:
list_default_paths()
return
if args.reset_default_paths:
reset_default_paths()
return
if args.make_webpage:
# Turn on GIS and HDF5 flags
gis = True
hdf5 = True
kmz = True
else:
gis = args.gis
hdf5 = args.hdf5
kmz = args.kmz
# Figure out what models will be run
if args.shakefile is not None: # user intends to actually run some models
shakefile = args.shakefile
# make output location for things
if args.output_filepath is None:
outdir = os.getcwd()
else:
outdir = args.output_filepath
if hdf5 or gis or kmz:
if not os.path.exists(outdir):
os.makedirs(outdir)
# download if is url
# cleanup = False
if not os.path.isfile(shakefile):
if isURL(shakefile):
# getGridURL returns a named temporary file object
shakefile = getGridURL(shakefile)
# cleanup = True # Be sure to delete it after
else:
raise NameError('Could not find "%s" as a file or a valid url'
% shakefile)
eventid = getHeaderData(shakefile)[0]['event_id']
# Get entire path so won't break if running gfail with relative path
shakefile = os.path.abspath(shakefile)
if args.extract_contents:
outfolder = outdir
else: # Nest in a folder named by eventid
outfolder = os.path.join(outdir, eventid)
if not os.path.exists(outfolder):
os.makedirs(outfolder)
# Copy shake grid into output directory
# --- this is base on advice from Mike that when running in production
# the shake grids are not archived and so if we need/want to have
# the exact grid used for the calculation later if there's every a
# question about how the calculation was done, the safest thing is
# to store a copy of it here.
shake_copy = os.path.join(outfolder, "grid.xml")
shutil.copyfile(shakefile, shake_copy)
if args.uncertfile is not None:
uncertfile = os.path.abspath(args.uncertfile)
unc_copy = os.path.join(outfolder, "uncertainty.xml")
shutil.copyfile(uncertfile, unc_copy)
else:
uncertfile = None
# Write shakefile to a file for use later
shakename = os.path.join(outfolder, "shakefile.txt")
shake_file = open(shakename, "wt")
shake_file.write(shake_copy)
shake_file.close()
filenames.append(shakename)
# Check that shakemap bounds do not cross 180/-180 line
if args.set_bounds is None:
sd = ShakeGrid.getFileGeoDict(shakefile)
if sd.xmin > sd.xmax:
print('\nShakeMap crosses 180/-180 line, setting bounds so '
'only side with more land area is run')
if sd.xmax + 180. > 180 - sd.xmin:
set_bounds = '%s, %s, %s, %s' % (
sd.ymin, sd.ymax, -180., sd.xmax)
else:
set_bounds = '%s, %s, %s, %s' % (sd.ymin, sd.ymax, sd.xmin,
180.)
print('Bounds applied: %s' % set_bounds)
else:
set_bounds = args.set_bounds
else:
set_bounds = args.set_bounds
config = args.config
if args.config_filepath is not None:
# only add config_filepath if full filepath not given and file
# ext is .ini
if (not os.path.isabs(config) and
os.path.splitext(config)[-1] == '.ini'):
config = os.path.join(args.config_filepath, config)
if os.path.splitext(config)[-1] == '.ini':
temp = ConfigObj(config)
if len(temp) == 0:
raise Exception(
'Could not find specified .ini file: %s' % config)
if args.data_path is not None:
temp = correct_config_filepaths(args.data_path, temp)
configs = [temp]
conffail = []
else:
# input is a list of config files
f = open(config, 'r')
configlist = f.readlines()
configs = []
conffail = []
for conf in configlist:
conf = conf.strip()
if not os.path.isabs(conf):
# only add config_filepath if full filepath not given
conf = os.path.join(args.config_filepath, conf)
try:
temp = ConfigObj(conf)
if temp:
if args.data_path is not None:
temp = correct_config_filepaths(
args.data_path, temp)
configs.append(temp)
else:
conffail.append(conf)
except BaseException:
conffail.append(conf)
print('\nRunning the following models:')
for conf in configs:
print('\t%s' % conf.keys()[0])
if len(conffail) > 0:
print('Could not find or read in the following config files:\n')
for conf in conffail:
print('\t%s' % conf)
print('\nContinuing...\n')
if set_bounds is not None:
if 'zoom' in set_bounds:
temp = set_bounds.split(',')
print('Using %s threshold of %1.1f to cut model bounds'
% (temp[1].strip(), float(temp[2].strip())))
bounds = get_bounds(shakefile, temp[1].strip(),
float(temp[2].strip()))
else:
temp = eval(set_bounds)
latmin = temp[0]
latmax = temp[1]
lonmin = temp[2]
lonmax = temp[3]
bounds = {'xmin': lonmin, 'xmax': lonmax,
'ymin': latmin, 'ymax': latmax}
print('Applying bounds of lonmin %1.2f, lonmax %1.2f, '
'latmin %1.2f, latmax %1.2f'
% (bounds['xmin'], bounds['xmax'],
bounds['ymin'], bounds['ymax']))
else:
bounds = None
if args.make_webpage:
results = []
# pre-read in ocean trimming file polygons so only do this step once
if args.trimfile is not None:
if not os.path.exists(args.trimfile):
print('trimfile defined does not exist: %s\n'
'Ocean will not be trimmed.' % args.trimfile)
trimfile = None
elif os.path.splitext(args.trimfile)[1] != '.shp':
print('trimfile must be a shapefile, '
'ocean will not be trimmed')
trimfile = None
else:
trimfile = args.trimfile
else:
trimfile = None
# Get finite fault ready, if exists
ffault = None
point = True
if args.finite_fault is not None:
point = False
try:
if os.path.splitext(args.finite_fault)[-1] == '.txt':
ffault = text_to_json(args.finite_fault)
elif os.path.splitext(args.finite_fault)[-1] == '.json':
ffault = args.finite_fault
else:
print('Could not read in finite fault, will '
'try to download from comcat')
ffault = None
except BaseException:
print('Could not read in finite fault, will try to '
'download from comcat')
ffault = None
if ffault is None:
# Try to get finite fault file, if it exists
try:
returned_ev = get_event_comcat(shakefile)
if returned_ev is not None:
testjd, detail, temp = returned_ev
evinfo = testjd['input']['event_information']
if 'faultfiles' in evinfo:
ffilename = evinfo['faultfiles']
if len(ffilename) > 0:
# Download the file
with tempfile.NamedTemporaryFile(
delete=False, mode='w') as f:
temp.getContent(ffilename, filename=f.name)
ffault = text_to_json(f.name)
os.remove(f.name)
point = False
else:
point = True
else:
print('Unable to determine source type, unknown if finite'
' fault or point source')
ffault = None
point = False
except Exception as e:
print(e)
print('Unable to determine source type, unknown if finite'
' fault or point source')
ffault = None
point = False
# Loop over config files
for conf in configs:
modelname = conf.keys()[0]
print('\nNow running %s:' % modelname)
notcov, newbnds = check_input_extents(
conf, shakefile=shakefile,
bounds=bounds
)
if len(notcov) > 0:
print('\nThe following input layers do not cover'
' the area of interest:\n\t%s' % '\n\t'.join(notcov))
if newbnds is None:
print('\nCannnot make bounds that work. '
'Skipping to next model\n')
continue
else:
pnt = '%s, %s, %s, %s' % (
newbnds['xmin'], newbnds['xmax'],
newbnds['ymin'], newbnds['ymax'])
print('Running model for new bounds that are fully covered'
' by input layer: %s' % pnt)
bounds2 = newbnds
else:
bounds2 = bounds
modelfunc = conf[modelname]['funcname']
if modelfunc == 'LogisticModel':
lm = LM.LogisticModel(shakefile, conf,
uncertfile=uncertfile,
saveinputs=args.save_inputs,
bounds=bounds2,
trimfile=trimfile)
maplayers = lm.calculate()
elif modelfunc == 'godt2008':
maplayers = godt2008(shakefile, conf,
uncertfile=uncertfile,
saveinputs=args.save_inputs,
bounds=bounds2,
trimfile=trimfile)
else:
print('Unknown model function specified in config for %s '
'model, skipping to next config' % modelfunc)
continue
# time1 = datetime.datetime.utcnow().strftime('%d%b%Y_%H%M')
# filename = ('%s_%s_%s' % (eventid, modelname, time1))
if args.appendname is not None:
filename = ('%s_%s_%s' % (eventid, modelname, args.appendname))
else:
filename = ('%s_%s' % (eventid, modelname))
if hdf5:
filenameh = filename + '.hdf5'
if os.path.exists(filenameh):
os.remove(filenameh)
savelayers(maplayers, os.path.join(outfolder, filenameh))
filenames.append(filenameh)
if gis or kmz:
for key in maplayers:
# Rename 'std' key to 'beta_sigma'
if key == 'std':
key_label = 'beta_sigma'
else:
key_label = key
if gis:
filen = os.path.join(outfolder, '%s_%s.bil'
% (filename, key_label))
fileh = os.path.join(outfolder, '%s_%s.hdr'
% (filename, key_label))
fileg = os.path.join(outfolder, '%s_%s.tif'
% (filename, key_label))
GDALGrid.copyFromGrid(
maplayers[key]['grid']).save(filen)
cflags = '-co COMPRESS=DEFLATE -co predictor=2'
srs = '-a_srs EPSG:4326'
cmd = 'gdal_translate %s %s -of GTiff %s %s' % (
srs, cflags, filen, fileg)
rc, so, se = get_command_output(cmd)
# Delete bil file and its header
os.remove(filen)
os.remove(fileh)
filenames.append(fileg)
if kmz and (not key.startswith('quantile') and not key.startswith('std')) :
plotorder, logscale, lims, colormaps, maskthresh = \
parseConfigLayers(maplayers, conf, keys=['model'])
maxprob = np.nanmax(maplayers[key]['grid'].getData())
if key == 'model':
qdict = {
k: maplayers[k] for k in maplayers.keys()
if k.startswith('quantile')
}
else:
qdict = None
if maskthresh is None:
maskthresh = [0.]
if maxprob >= maskthresh[0]:
filen = os.path.join(outfolder, '%s_%s.kmz'
% (filename, key_label))
filek = create_kmz(maplayers[key], filen,
mask=maskthresh[0],
levels=lims[0],
qdict=qdict)
filenames.append(filek)
else:
print('No unmasked pixels present, skipping kmz '
'file creation')
if args.make_webpage:
# Compile into list of results for later
results.append(maplayers)
# # Make binary output for ShakeCast
# filef = os.path.join(outfolder, '%s_model.flt'
# % filename)
# # And get name of header
# filefh = os.path.join(outfolder, '%s_model.hdr'
# % filename)
# # Make file
# write_floats(filef, maplayers['model']['grid'])
# filenames.append(filef)
# filenames.append(filefh)
eventid = getHeaderData(shakefile)[0]['event_id']
if not hasattr(args, 'eventsource'):
args.eventsource = 'us'
if not hasattr(args, 'eventsourcecode'):
args.eventsourcecode = eventid
if args.make_webpage:
if len(results) == 0:
raise Exception('No models were run. Cannot make webpages.')
outputs = hazdev(
results, configs,
shakefile, outfolder=outfolder,
pop_file=args.popfile,
pager_alert=args.property_alertlevel,
eventsource=args.eventsource,
eventsourcecode=args.eventsourcecode,
point=point, gf_version=args.gf_version,
pdlcall=args.pdlcall)
filenames = filenames + outputs
# # create transparent png file
# outputs = create_png(outdir)
# filenames = filenames + outputs
#
# # create info file
# infofile = create_info(outdir)
# filenames = filenames + infofile
print('\nFiles created:\n')
for filen in filenames:
print('%s' % filen)
return filenames
def getShakefiles(event, outdir, uncert=False, version=None,
source='preferred'):
"""
Download the shakemap grid.xml file and the
Args:
event event id or URL
"""
shakefile = os.path.join(outdir, 'grid.xml')
if uncert:
uncertfile = os.path.join(outdir, 'uncertainty.xml')
else:
uncertfile = None
if version is not None:
includeSuperseded = True
else:
includeSuperseded = False
# If args.event is a url to a shakemap, download from that url
if isURL(event):
if version is not None or source != 'preferred':
raise Exception('Cannot set shakemap version or source when URL '
'of gridfile is provided')
try:
shakefile = getGridURL(event, shakefile)
except Exception as e:
raise Exception('Could not download shakemap file from provided '
'URL: %s' % e)
# Now get corresponding event detail
event = getHeaderData(shakefile)[0]['event_id']
version = getHeaderData(shakefile)[0]['shakemap_version']
source = getHeaderData(shakefile)[0]['shakemap_originator']
try:
detail = get_event_by_id(
event, includesuperseded=includeSuperseded)
except BaseException:
# Maybe originator is missing from event id, try another way
try:
temp = getHeaderData(shakefile)[0]
temp2 = '%s%s' % (
temp['shakemap_originator'], temp['shakemap_id'])
detail = get_event_by_id(
temp2, includesuperseded=includeSuperseded)
event = temp2
except Exception as e:
msg = 'Could not get event detail for shakemap at provided URL: %s'
print(msg % e)
else:
detail = get_event_by_id(event, includesuperseded=includeSuperseded)
# Get most recent version
if version is None: # Get current preferred
shakemap = detail.getProducts('shakemap', source=source)[0]
shakemap.getContent('grid.xml', shakefile)
# or get version requested
else:
allversions = detail.getProducts('shakemap', version='all',
source=source)
# First try with properties, more reliable
vers = []
for allv in allversions:
if 'version' in allv.properties:
vers.append(int(allv['version']))
else:
vers.append(-999)
idx = np.where(np.array(vers) == version)[0]
if len(idx) < 1:
# Try using libcomcat version, less reliable...
vers = [allv.version for allv in allversions]
idx = np.where(np.array(vers) == version)[0]
if len(idx) == 1:
# Check info.json to make sure it's right version
infobytes, url = allversions[idx[0]
].getContentBytes('info.json')
info = json.loads(infobytes.decode('utf-8'))
if info['processing']['shakemap_versions']['map_version'] != version:
idx = []
if len(idx) < 1:
msg = 'Could not find version %d of Shakemap from source %s'
raise Exception(msg % (version, source))
if len(idx) > 1:
msg = 'Found more than one ShakeMap with matching source and version. \
Choosing first one.'
warnings.warn(msg)
print(msg)
shakemap = allversions[idx[0]]
shakemap.getContent('grid.xml', shakefile)
if uncert:
uncertfile = getUncert(shakemap, uncertfile)
return detail, shakefile, uncertfile
def __init__(self,config,shakefile,model):
if model not in getLogisticModelNames(config):
raise Exception('Could not find a model called "%s" in config %s.' % (model,config))
#do everything here short of calculations - parse config, assemble eqn strings, load data.
self.model = model
cmodel = config['logistic_models'][model]
self.coeffs = validateCoefficients(cmodel)
self.layers = validateLayers(cmodel)#key = layer name, value = file name
self.terms,timeField = validateTerms(cmodel,self.coeffs,self.layers)
self.interpolations = validateInterpolations(cmodel,self.layers)
self.units = validateUnits(cmodel,self.layers)
if 'baselayer' not in cmodel:
raise Exception('You must specify a base layer file in config.')
if cmodel['baselayer'] not in list(self.layers.keys()):
raise Exception('You must specify a base layer corresponding to one of the files in the layer section.')
#get the geodict for the shakemap
geodict = ShakeGrid.getFileGeoDict(shakefile,adjust='res')
griddict,eventdict,specdict,fields,uncertainties = getHeaderData(shakefile)
YEAR = eventdict['event_timestamp'].year
MONTH = MONTHS[(eventdict['event_timestamp'].month)-1]
DAY = eventdict['event_timestamp'].day
HOUR = eventdict['event_timestamp'].hour
#now find the layer that is our base layer and get the largest bounds we can guaranteed not to exceed shakemap bounds
basefile = self.layers[cmodel['baselayer']]
ftype = getFileType(basefile)
if ftype == 'esri':
basegeodict = GDALGrid.getFileGeoDict(basefile)
sampledict = basegeodict.getBoundsWithin(geodict)
elif ftype == 'gmt':
basegeodict = GMTGrid.getFileGeoDict(basefile)
sampledict = basegeodict.getBoundsWithin(geodict)
else:
raise Exception('All predictor variable grids must be a valid GMT or ESRI file type')
#now load the shakemap, resampling and padding if necessary
self.shakemap = ShakeGrid.load(shakefile,samplegeodict=sampledict,resample=True,doPadding=True,adjust='res')
#load the predictor layers into a dictionary
self.layerdict = {} #key = layer name, value = grid object
for layername,layerfile in self.layers.items():
if isinstance(layerfile,list):
for lfile in layerfile:
if timeField == 'MONTH':
if lfile.find(MONTH) > -1:
layerfile = lfile
ftype = getFileType(layerfile)
interp = self.interpolations[layername]
if ftype == 'gmt':
lyr = GMTGrid.load(layerfile,sampledict,resample=True,method=interp,doPadding=True)
elif ftype == 'esri':
lyr = GDALGrid.load(layerfile,sampledict,resample=True,method=interp,doPadding=True)
else:
msg = 'Layer %s (file %s) does not appear to be a valid GMT or ESRI file.' % (layername,layerfile)
raise Exception(msg)
self.layerdict[layername] = lyr
else:
#first, figure out what kind of file we have (or is it a directory?)
ftype = getFileType(layerfile)
interp = self.interpolations[layername]
if ftype == 'gmt':
lyr = GMTGrid.load(layerfile,sampledict,resample=True,method=interp,doPadding=True)
elif ftype == 'esri':
lyr = GDALGrid.load(layerfile,sampledict,resample=True,method=interp,doPadding=True)
else:
msg = 'Layer %s (file %s) does not appear to be a valid GMT or ESRI file.' % (layername,layerfile)
raise Exception(msg)
self.layerdict[layername] = lyr
shapes = {}
for layername,layer in self.layerdict.items():
shapes[layername] = layer.getData().shape
x = 1
self.nuggets = [str(self.coeffs['b0'])]
ckeys = list(self.terms.keys())
ckeys.sort()
for key in ckeys:
term = self.terms[key]
coeff = self.coeffs[key]
self.nuggets.append('(%g * %s)' % (coeff, term))
self.equation = ' + '.join(self.nuggets)
self.geodict = self.shakemap.getGeoDict()
def get_event_comcat(shakefile, timewindow=60, degwindow=0.3, magwindow=0.2):
"""
Find an event in comcat, searching first by event id and if that
fails searching by magnitude, time, and location.
Args:
shakefile (str): path to shakemap .xml file of event to find
timewindow (float): width of time window to search around time defined
in shakefile (in seconds)
degwindow (float): width of area to search around location specified in
shakefile (in degrees).
magwindow (float): width of magnitude window to search around the
magnitude specified in shakefile.
Returns:
None if event not found, else tuple (info, detail, shakemap) where,
* info: json formatted dictionary of info.json for the event
* detail: event detail from comcat
* shakemap: shakemap of event found (from comcat)
"""
header_dicts = getHeaderData(shakefile)
grid_dict = header_dicts[0]
event_dict = header_dicts[1]
version = grid_dict['shakemap_version']
try:
eid = event_dict['event_id']
net = 'us'
if 'event_network' in event_dict:
net = event_dict['event_network']
if not eid.startswith(net):
eid = net + eid
detail = get_event_by_id(eid, includesuperseded=True)
except:
lat = event_dict['lat']
lon = event_dict['lon']
mag = event_dict['magnitude']
time = event_dict['event_timestamp']
starttime = time - timedelta(seconds=timewindow)
endtime = time + timedelta(seconds=timewindow)
minlat = lat - degwindow
minlon = lon - degwindow
maxlat = lat + degwindow
maxlon = lon + degwindow
minmag = max(0, mag - magwindow)
maxmag = min(10, mag + magwindow)
events = search(starttime=starttime,
endtime=endtime,
minmagnitude=minmag,
maxmagnitude=maxmag,
minlatitude=minlat,
minlongitude=minlon,
maxlatitude=maxlat,
maxlongitude=maxlon)
if not len(events):
return None
detail = events[0].getDetailEvent()
allversions = detail.getProducts('shakemap', version=VersionOption.ALL)
# Find the right version
vers = [allv.version for allv in allversions]
idx = np.where(np.array(vers) == version)[0][0]
shakemap = allversions[idx]
infobytes, url = shakemap.getContentBytes('info.json')
info = json.loads(infobytes.decode('utf-8'))
return info, detail, shakemap
def __init__(self,
shakefile,
config,
uncertfile=None,
saveinputs=False,
slopefile=None,
bounds=None,
slopemod=None,
trimfile=None):
"""
Sets up the logistic model
Args:
shakefile (str): Path to shakemap grid.xml file for the event.
config: configobj object defining the model and its inputs. Only
one model should be described in each config file.
uncertfile (str): Path to uncertainty.xml file.
saveinputs (bool): Save input layers as Grid2D objects in addition
to the model? If false (the default), it will just output the
model.
slopefile (str): Optional path to slopefile that will be resampled
to the other input files for applying thresholds. OVERWRITES
VALUE IN CONFIG.
bounds (dict): Default of None uses ShakeMap boundaries, otherwise
a dictionary of boundaries to cut to like
.. code-block:: python
bounds = {
'xmin': lonmin, 'xmax': lonmax,
'ymin': latmin, 'ymax': latmax
}
slopemod (str): How slope input should be modified to be in
degrees: e.g., ``np.arctan(slope) * 180. / np.pi`` or
``slope/100.`` (note that this may be in the config file
already).
trimfile (str): shapefile of earth's landmasses to use to cut
offshore areas.
"""
mnames = getLogisticModelNames(config)
if len(mnames) == 0:
raise Exception('No config file found or problem with config '
'file format')
if len(mnames) > 1:
raise Exception('Config file contains more than one model which '
'is no longer allowed, update your config file '
'to the newer format')
self.model = mnames[0]
self.config = config
cmodel = config[self.model]
self.modeltype = cmodel['gfetype']
self.coeffs = validateCoefficients(cmodel)
# key = layer name, value = file name
self.layers = validateLayers(cmodel)
self.terms, timeField = validateTerms(cmodel, self.coeffs, self.layers)
self.interpolations = validateInterpolations(cmodel, self.layers)
self.units = validateUnits(cmodel, self.layers)
self.gmused = [
value for term, value in cmodel['terms'].items()
if 'pga' in value.lower() or 'pgv' in value.lower()
or 'mmi' in value.lower()
]
self.modelrefs, self.longrefs, self.shortrefs = validateRefs(cmodel)
#self.numstd = numstd
self.clips = validateClips(cmodel, self.layers, self.gmused)
self.notes = ''
if cmodel['baselayer'] not in list(self.layers.keys()):
raise Exception('You must specify a base layer corresponding to '
'one of the files in the layer section.')
self.saveinputs = saveinputs
if slopefile is None:
try:
self.slopefile = cmodel['slopefile']
except:
# print('Slopefile not specified in config, no slope '
# 'thresholds will be applied\n')
self.slopefile = None
else:
self.slopefile = slopefile
if slopemod is None:
try:
self.slopemod = cmodel['slopemod']
except:
self.slopemod = None
# See if trimfile exists
if trimfile is not None:
if not os.path.exists(trimfile):
print('trimfile defined does not exist: %s\nOcean will not be '
'trimmed' % trimfile)
self.trimfile = None
elif os.path.splitext(trimfile)[1] != '.shp':
print('trimfile must be a shapefile, ocean will not be '
'trimmed')
self.trimfile = None
else:
self.trimfile = trimfile
else:
self.trimfile = None
# Get month of event
griddict, eventdict, specdict, fields, uncertainties = \
getHeaderData(shakefile)
MONTH = MONTHS[(eventdict['event_timestamp'].month) - 1]
# Figure out how/if need to cut anything
geodict = ShakeGrid.getFileGeoDict(shakefile, adjust='res')
if bounds is not None: # Make sure bounds are within ShakeMap Grid
if geodict.xmin < geodict.xmax: # only if signs are not opposite
if (geodict.xmin > bounds['xmin']
or geodict.xmax < bounds['xmax']
or geodict.ymin > bounds['ymin']
or geodict.ymax < bounds['ymax']):
print('Specified bounds are outside shakemap area, using '
'ShakeMap bounds instead.')
bounds = None
if bounds is not None:
tempgdict = GeoDict.createDictFromBox(bounds['xmin'],
bounds['xmax'],
bounds['ymin'],
bounds['ymax'],
geodict.dx,
geodict.dy,
inside=False)
# If Shakemap geodict crosses 180/-180 line, fix geodict so things don't break
if geodict.xmin > geodict.xmax:
if tempgdict.xmin < 0:
geodict._xmin -= 360.
else:
geodict._xmax += 360.
gdict = geodict.getBoundsWithin(tempgdict)
else:
gdict = geodict
# Now find the layer that is our base layer and get the largest bounds
# we can guarantee not to exceed shakemap bounds
basefile = self.layers[cmodel['baselayer']]
ftype = getFileType(basefile)
if ftype == 'esri':
basegeodict, firstcol = GDALGrid.getFileGeoDict(basefile)
if basegeodict == gdict:
sampledict = gdict
else:
sampledict = basegeodict.getBoundsWithin(gdict)
elif ftype == 'gmt':
basegeodict, firstcol = GMTGrid.getFileGeoDict(basefile)
if basegeodict == gdict:
sampledict = gdict
else:
sampledict = basegeodict.getBoundsWithin(gdict)
else:
raise Exception('All predictor variable grids must be a valid '
'GMT or ESRI file type.')
# Do we need to subdivide baselayer?
if 'divfactor' in self.config[self.model].keys():
divfactor = float(self.config[self.model]['divfactor'])
if divfactor != 1.:
# adjust sampledict so everything will be resampled
newxmin = sampledict.xmin - sampledict.dx / \
2. + sampledict.dx/(2.*divfactor)
newymin = sampledict.ymin - sampledict.dy / \
2. + sampledict.dy/(2.*divfactor)
newxmax = sampledict.xmax + sampledict.dx / \
2. - sampledict.dx/(2.*divfactor)
newymax = sampledict.ymax + sampledict.dy / \
2. - sampledict.dy/(2.*divfactor)
newdx = sampledict.dx / divfactor
newdy = sampledict.dy / divfactor
sampledict = GeoDict.createDictFromBox(newxmin,
newxmax,
newymin,
newymax,
newdx,
newdy,
inside=True)
# Find slope thresholds, if applicable
self.slopemin = 'none'
self.slopemax = 'none'
if self.slopefile is not None:
try:
self.slopemin = float(config[self.model]['slopemin'])
self.slopemax = float(config[self.model]['slopemax'])
except:
print('Could not find slopemin and/or slopemax in config, '
'limits. No slope thresholds will be applied.')
self.slopemin = 'none'
self.slopemax = 'none'
# Make temporary directory for hdf5 pytables file storage
self.tempdir = tempfile.mkdtemp()
# now load the shakemap, resampling and padding if necessary
temp = ShakeGrid.load(shakefile) # , adjust='res')
self.shakedict = temp.getShakeDict()
self.eventdict = temp.getEventDict()
self.shakemap = {}
# Read both PGA and PGV in, may need them for thresholds
for gm in ['pga', 'pgv']:
junkfile = os.path.join(self.tempdir, 'temp.bil')
GDALGrid.copyFromGrid(temp.getLayer(gm)).save(junkfile)
if gm in self.interpolations.keys():
intermeth = self.interpolations[gm]
else:
intermeth = 'bilinear'
junkgrid = quickcut(junkfile,
sampledict,
precise=True,
method=intermeth)
if gm in self.clips:
junkgrid.setData(
np.clip(junkgrid.getData(), self.clips[gm][0],
self.clips[gm][1]))
self.shakemap[gm] = TempHdf(
junkgrid, os.path.join(self.tempdir, '%s.hdf5' % gm))
os.remove(junkfile)
del (temp)
# get updated geodict
sampledict = junkgrid.getGeoDict()
# take uncertainties into account, if available
if uncertfile is not None:
self.uncert = {}
try:
# Only read in the ones that will be needed
temp = ShakeGrid.load(uncertfile)
already = []
for gm in self.gmused:
if 'pgv' in gm:
gmsimp = 'pgv'
elif 'pga' in gm:
gmsimp = 'pga'
elif 'mmi' in gm:
gmsimp = 'mmi'
if gmsimp in already:
continue
junkfile = os.path.join(self.tempdir, 'temp.bil')
GDALGrid.copyFromGrid(temp.getLayer('std%s' %
gmsimp)).save(junkfile)
if gmsimp in self.interpolations.keys():
intermeth = self.interpolations[gmsimp]
else:
intermeth = 'bilinear'
junkgrid = quickcut(junkfile,
sampledict,
precise=True,
method=intermeth)
if gmsimp in self.clips:
junkgrid.setData(
np.clip(junkgrid.getData(), self.clips[gmsimp][0],
self.clips[gmsimp][1]))
self.uncert['std' + gmsimp] = TempHdf(
junkgrid,
os.path.join(self.tempdir, 'std%s.hdf5' % gmsimp))
already.append(gmsimp)
os.remove(junkfile)
del (temp)
except:
print('Could not read uncertainty file, ignoring '
'uncertainties')
self.uncert = None
else:
self.uncert = None
# Load the predictor layers, save as hdf5 temporary files, put file
# locations into a dictionary.
# Will be replaced in the next section if a slopefile was defined
self.nonzero = None
# key = layer name, value = grid object
self.layerdict = {}
didslope = False
for layername, layerfile in self.layers.items():
start = timer()
if isinstance(layerfile, list):
for lfile in layerfile:
if timeField == 'MONTH':
if lfile.find(MONTH) > -1:
layerfile = lfile
ftype = getFileType(layerfile)
interp = self.interpolations[layername]
temp = quickcut(layerfile,
sampledict,
precise=True,
method=interp)
if layername in self.clips:
temp.setData(
np.clip(temp.getData(),
self.clips[layername][0],
self.clips[layername][1]))
self.layerdict[layername] = TempHdf(
temp,
os.path.join(self.tempdir,
'%s.hdf5' % layername))
del (temp)
else:
interp = self.interpolations[layername]
temp = quickcut(layerfile,
sampledict,
precise=True,
method=interp)
if layername in self.clips:
temp.setData(
np.clip(temp.getData(), self.clips[layername][0],
self.clips[layername][1]))
if layername == 'rock': # Convert unconsolidated sediments to a more reasonable coefficient
sub1 = temp.getData()
# Change to mixed sed rock coeff
sub1[sub1 <= -3.21] = -1.36
temp.setData(sub1)
self.notes += 'unconsolidated sediment coefficient changed\
to -1.36 (weaker) from -3.22 to better reflect that this \
unit is not actually strong\n'
self.layerdict[layername] = TempHdf(
temp, os.path.join(self.tempdir, '%s.hdf5' % layername))
td = temp.getGeoDict()
if td != sampledict:
raise Exception(
'Geodictionaries of resampled files do not match')
if layerfile == self.slopefile:
flag = 0
if self.slopemin == 'none' and self.slopemax == 'none':
flag = 1
if self.slopemod is None:
slope1 = temp.getData().astype(float)
slope = 0
else:
try:
slope = temp.getData().astype(float)
slope1 = eval(self.slopemod)
except:
print('slopemod provided not valid, continuing '
'without slope thresholds.')
flag = 1
if flag == 0:
nonzero = np.array([(slope1 > self.slopemin) &
(slope1 <= self.slopemax)])
self.nonzero = nonzero[0, :, :]
del (slope1)
del (slope)
else:
# Still remove areas where the slope equals exactly
# 0.0 to remove offshore liq areas.
nonzero = np.array([slope1 != 0.0])
self.nonzero = nonzero[0, :, :]
del (slope1)
didslope = True
del (temp)
print('Loading %s layer: %1.1f sec' % (layername, timer() - start))
if didslope is False and self.slopefile is not None:
# Slope didn't get read in yet
temp = quickcut(self.slopefile,
sampledict,
precise=True,
method='bilinear')
flag = 0
if self.slopemin == 'none' and self.slopemax == 'none':
flag = 1
if self.slopemod is None:
slope1 = temp.getData().astype(float)
slope = 0
else:
try:
slope = temp.getData().astype(float)
slope1 = eval(self.slopemod)
except:
print('slopemod provided not valid, continuing without '
'slope thresholds')
flag = 1
if flag == 0:
nonzero = np.array([
(slope1 > self.slopemin) & (slope1 <= self.slopemax)
])
self.nonzero = nonzero[0, :, :]
del (slope1)
del (slope)
else:
# Still remove areas where the slope equals exactly
# 0.0 to remove offshore liq areas.
nonzero = np.array([slope1 != 0.0])
self.nonzero = nonzero[0, :, :]
del (slope1)
self.nuggets = [str(self.coeffs['b0'])]
ckeys = list(self.terms.keys())
ckeys.sort()
for key in ckeys:
term = self.terms[key]
coeff = self.coeffs[key]
self.nuggets.append('(%g * %s)' % (coeff, term))
self.equation = ' + '.join(self.nuggets)
self.geodict = sampledict
def test():
homedir = os.path.dirname(os.path.abspath(
__file__)) # where is this script?
fatfile = os.path.join(homedir, '..', 'data', 'fatality.xml')
ecofile = os.path.join(homedir, '..', 'data', 'economy.xml')
cityfile = os.path.join(homedir, '..', 'data', 'cities1000.txt')
event = 'northridge'
shakefile = os.path.join(homedir, '..', 'data',
'eventdata', event, '%s_grid.xml' % event)
popfile = os.path.join(homedir, '..', 'data',
'eventdata', event, '%s_gpw.flt' % event)
isofile = os.path.join(homedir, '..', 'data',
'eventdata', event, '%s_isogrid.bil' % event)
urbanfile = os.path.join(homedir, '..', 'data',
'eventdata', 'northridge', 'northridge_urban.bil')
oceanfile = os.path.join(
homedir, '..', 'data', 'eventdata', 'northridge', 'northridge_ocean.json')
oceangridfile = os.path.join(
homedir, '..', 'data', 'eventdata', 'northridge', 'northridge_ocean.bil')
timezonefile = os.path.join(
homedir, '..', 'data', 'eventdata', 'northridge', 'northridge_timezone.shp')
invfile = os.path.join(homedir, '..', 'data', 'semi_inventory.hdf')
colfile = os.path.join(homedir, '..', 'data', 'semi_collapse_mmi.hdf')
casfile = os.path.join(homedir, '..', 'data', 'semi_casualty.hdf')
workfile = os.path.join(homedir, '..', 'data', 'semi_workforce.hdf')
tdir = tempfile.mkdtemp()
basename = os.path.join(tdir, 'output')
exp = Exposure(popfile, 2012, isofile)
results = exp.calcExposure(shakefile)
shakegrid = exp.getShakeGrid()
popgrid = exp.getPopulationGrid()
pdffile, pngfile, mapcities = draw_contour(
shakegrid, popgrid, oceanfile, oceangridfile, cityfile, basename)
shutil.rmtree(tdir)
popyear = 2012
shake_tuple = getHeaderData(shakefile)
tsunami = shake_tuple[1]['magnitude'] >= TSUNAMI_MAG_THRESH
semi = SemiEmpiricalFatality.fromDefault()
semi.setGlobalFiles(popfile, popyear, urbanfile, isofile)
semiloss, resfat, nonresfat = semi.getLosses(shakefile)
popgrowth = PopulationGrowth.fromDefault()
econexp = EconExposure(popfile, 2012, isofile)
fatmodel = EmpiricalLoss.fromDefaultFatality()
expobject = Exposure(popfile, 2012, isofile, popgrowth)
expdict = expobject.calcExposure(shakefile)
fatdict = fatmodel.getLosses(expdict)
econexpdict = econexp.calcExposure(shakefile)
ecomodel = EmpiricalLoss.fromDefaultEconomic()
ecodict = ecomodel.getLosses(expdict)
shakegrid = econexp.getShakeGrid()
pagerversion = 1
cities = Cities.loadFromGeoNames(cityfile)
impact1 = '''Red alert level for economic losses. Extensive damage is probable
and the disaster is likely widespread. Estimated economic losses are less
than 1% of GDP of Italy. Past events with this alert level have required
a national or international level response.'''
impact2 = '''Orange alert level for shaking-related fatalities. Significant
casualties are likely.'''
structcomment = '''Overall, the population in this region resides in structures
that are a mix of vulnerable and earthquake resistant construction. The predominant
vulnerable building types are unreinforced brick with mud and mid-rise nonductile
concrete frame with infill construction.'''
histeq = [1, 2, 3]
struct_comment = '''Overall, the population in this region resides
in structures that are resistant to earthquake
shaking, though some vulnerable structures
exist.'''
secondary_comment = '''Recent earthquakes in this area have caused secondary hazards
such as landslides that might have contributed to losses.'''
hist_comment = ''''A magnitude 7.1 earthquake 240 km east of this event struck Reventador: Ecuador
on March 6, 1987 (UTC), with estimated population exposures of 14,000 at intensity VIII and 2,000
at intensity IX or greater, resulting in a reported 5,000 fatalities.'''.replace('\n', '')
location = 'At the top of the world.'
is_released = True
doc = PagerData()
eventcode = shakegrid.getEventDict()['event_id']
versioncode = eventcode
doc.setInputs(shakegrid, timezonefile, pagerversion,
versioncode, eventcode, tsunami, location, is_released)
doc.setExposure(expdict, econexpdict)
doc.setModelResults(fatmodel, ecomodel,
fatdict, ecodict,
semiloss, resfat, nonresfat)
doc.setComments(impact1, impact2, struct_comment,
hist_comment, secondary_comment)
doc.setMapInfo(cityfile, mapcities)
doc.validate()
# let's test the property methods
tdoc(doc, shakegrid, impact1, impact2,
expdict, struct_comment, hist_comment)
# see if we can save this to a bunch of files then read them back in
try:
tdir = tempfile.mkdtemp()
doc.saveToJSON(tdir)
newdoc = PagerData()
newdoc.loadFromJSON(tdir)
tdoc(newdoc, shakegrid, impact1, impact2,
expdict, struct_comment, hist_comment)
# test the xml saving method
xmlfile = doc.saveToLegacyXML(tdir)
except Exception as e:
assert 1 == 2
finally:
shutil.rmtree(tdir)
def getShakefiles(event,
outdir,
uncert=False,
version=None,
source='preferred'):
"""
Download the shakemap grid.xml file and the
Args:
event event id or URL
"""
shakefile = os.path.join(outdir, 'grid.xml')
if uncert:
uncertfile = os.path.join(outdir, 'uncertainty.xml')
else:
uncertfile = None
# If args.event is a url to a shakemap, download from that url
if isURL(event):
if version is not None or source != 'preferred':
raise Exception(
'Cannot set shakemap version or source when URL of '
'gridfile is provided')
try:
shakefile = getGridURL(event, shakefile)
except Exception as e:
raise Exception('Could not download shakemap file from provided '
'URL: %s' % e)
# Now get corresponding event detail
event = getHeaderData(shakefile)[0]['event_id']
version = getHeaderData(shakefile)[0]['shakemap_version']
source = getHeaderData(shakefile)[0]['shakemap_originator']
try:
detail = get_event_by_id(event, includesuperseded=True)
except: # Maybe originator is missing from event id, try another way
try:
temp = getHeaderData(shakefile)[0]
temp2 = '%s%s' % (temp['shakemap_originator'],
temp['shakemap_id'])
detail = get_event_by_id(temp2, includesuperseded=True)
event = temp2
except Exception as e:
msg = 'Could not get event detail for shakemap at provided URL: %s'
print(msg % e)
else:
detail = get_event_by_id(event, includesuperseded=True)
# Get most recent version
if version is None: # Get current preferred
shakemap = detail.getProducts('shakemap', source=source)[0]
shakemap.getContent('grid.xml', shakefile)
# or get version requested
else:
allversions = detail.getProducts('shakemap',
version='all',
source=source)
vers = [allv.version for allv in allversions]
idx = np.where(np.array(vers) == version)[0]
if len(idx) != 1:
msg = 'Could not find version %d of Shakemap from source %s'
raise Exception(msg % (version, source))
shakemap = allversions[idx[0]]
shakemap.getContent('grid.xml', shakefile)
if uncert:
uncertfile = getUncert(shakemap, uncertfile)
return detail, shakefile, uncertfile
def __init__(self,
shakefile,
config,
uncertfile=None,
saveinputs=False,
slopefile=None,
slopediv=1.,
bounds=None,
numstd=1):
"""Set up the logistic model
# ADD BOUNDS TO THIS MODEL
:param config: configobj (config .ini file read in using configobj) defining the model and its inputs. Only one
model should be described in each config file.
:type config: dictionary
:param shakefile: Full file path to shakemap.xml file for the event of interest
:type shakefile: string
:param uncertfile: Full file path to xml file of shakemap uncertainties
:type uncertfile: string
:param saveinputs: if True, saves all the input layers as Grid2D objects in addition to the model
if false, it will just output the model
:type saveinputs: boolean
:param slopefile: optional file path to slopefile that will be resampled to the other input files for applying
thresholds OVERWRITES VALUE IN CONFIG
:type slopefile: string
:param slopediv: number to divide slope by to get to degrees (usually will be default
of 1.)
:type slopediv: float
:param numstd: number of +/- standard deviations to use if uncertainty is computed (uncertfile is not None)
"""
mnames = getLogisticModelNames(config)
if len(mnames) == 0:
raise Exception(
'No config file found or problem with config file format')
if len(mnames) > 1:
raise Exception(
'Config file contains more than one model which is no longer allowed,\
update your config file to the newer format')
self.model = mnames[0]
self.config = config
cmodel = config[self.model]
self.modeltype = cmodel['gfetype']
self.coeffs = validateCoefficients(cmodel)
self.layers = validateLayers(
cmodel) # key = layer name, value = file name
self.terms, timeField = validateTerms(cmodel, self.coeffs, self.layers)
self.interpolations = validateInterpolations(cmodel, self.layers)
self.units = validateUnits(cmodel, self.layers)
self.gmused = [
value for term, value in cmodel['terms'].items()
if 'pga' in value.lower() or 'pgv' in value.lower()
or 'mmi' in value.lower()
]
self.modelrefs, self.longrefs, self.shortrefs = validateRefs(cmodel)
self.numstd = numstd
if cmodel['baselayer'] not in list(self.layers.keys()):
raise Exception(
'You must specify a base layer corresponding to one of the files in the layer section.'
)
self.saveinputs = saveinputs
if slopefile is None:
try:
self.slopefile = cmodel['slopefile']
except:
print(
'Could not find slopefile term in config, no slope thresholds will be applied\n'
)
self.slopefile = None
else:
self.slopefile = slopefile
self.slopediv = slopediv
#get the geodict for the shakemap
geodict = ShakeGrid.getFileGeoDict(shakefile, adjust='res')
griddict, eventdict, specdict, fields, uncertainties = getHeaderData(
shakefile)
#YEAR = eventdict['event_timestamp'].year
MONTH = MONTHS[(eventdict['event_timestamp'].month) - 1]
#DAY = eventdict['event_timestamp'].day
#HOUR = eventdict['event_timestamp'].hour
#now find the layer that is our base layer and get the largest bounds we can guarantee not to exceed shakemap bounds
basefile = self.layers[cmodel['baselayer']]
ftype = getFileType(basefile)
if ftype == 'esri':
basegeodict, firstcol = GDALGrid.getFileGeoDict(basefile)
sampledict = basegeodict.getBoundsWithin(geodict)
elif ftype == 'gmt':
basegeodict, firstcol = GMTGrid.getFileGeoDict(basefile)
sampledict = basegeodict.getBoundsWithin(geodict)
else:
raise Exception(
'All predictor variable grids must be a valid GMT or ESRI file type'
)
#now load the shakemap, resampling and padding if necessary
if ShakeGrid.getFileGeoDict(shakefile, adjust='res') == sampledict:
self.shakemap = ShakeGrid.load(shakefile, adjust='res')
flag = 1
else:
self.shakemap = ShakeGrid.load(shakefile,
samplegeodict=sampledict,
resample=True,
doPadding=True,
adjust='res')
flag = 0
# take uncertainties into account
if uncertfile is not None:
try:
if flag == 1:
self.uncert = ShakeGrid.load(uncertfile, adjust='res')
else:
self.uncert = ShakeGrid.load(uncertfile,
samplegeodict=sampledict,
resample=True,
doPadding=True,
adjust='res')
except:
print(
'Could not read uncertainty file, ignoring uncertainties')
self.uncert = None
else:
self.uncert = None
#load the predictor layers into a dictionary
self.layerdict = {} # key = layer name, value = grid object
for layername, layerfile in self.layers.items():
if isinstance(layerfile, list):
for lfile in layerfile:
if timeField == 'MONTH':
if lfile.find(MONTH) > -1:
layerfile = lfile
ftype = getFileType(layerfile)
interp = self.interpolations[layername]
if ftype == 'gmt':
if GMTGrid.getFileGeoDict(
layerfile)[0] == sampledict:
lyr = GMTGrid.load(layerfile)
else:
lyr = GMTGrid.load(layerfile,
sampledict,
resample=True,
method=interp,
doPadding=True)
elif ftype == 'esri':
if GDALGrid.getFileGeoDict(
layerfile)[0] == sampledict:
lyr = GDALGrid.load(layerfile)
else:
lyr = GDALGrid.load(layerfile,
sampledict,
resample=True,
method=interp,
doPadding=True)
else:
msg = 'Layer %s (file %s) does not appear to be a valid GMT or ESRI file.' % (
layername, layerfile)
raise Exception(msg)
self.layerdict[layername] = lyr
else:
#first, figure out what kind of file we have (or is it a directory?)
ftype = getFileType(layerfile)
interp = self.interpolations[layername]
if ftype == 'gmt':
if GMTGrid.getFileGeoDict(layerfile)[0] == sampledict:
lyr = GMTGrid.load(layerfile)
else:
lyr = GMTGrid.load(layerfile,
sampledict,
resample=True,
method=interp,
doPadding=True)
elif ftype == 'esri':
if GDALGrid.getFileGeoDict(layerfile)[0] == sampledict:
lyr = GDALGrid.load(layerfile)
else:
lyr = GDALGrid.load(layerfile,
sampledict,
resample=True,
method=interp,
doPadding=True)
else:
msg = 'Layer %s (file %s) does not appear to be a valid GMT or ESRI file.' % (
layername, layerfile)
raise Exception(msg)
self.layerdict[layername] = lyr
shapes = {}
for layername, layer in self.layerdict.items():
shapes[layername] = layer.getData().shape
self.nuggets = [str(self.coeffs['b0'])]
ckeys = list(self.terms.keys())
ckeys.sort()
for key in ckeys:
term = self.terms[key]
coeff = self.coeffs[key]
self.nuggets.append('(%g * %s)' % (coeff, term))
self.equation = ' + '.join(self.nuggets)
if self.uncert is not None:
self.nugmin = copy.copy(self.nuggets)
self.nugmax = copy.copy(self.nuggets)
# Find the term with the shakemap input and replace for these nuggets
for k, nug in enumerate(self.nuggets):
if "self.shakemap.getLayer('pga').getData()" in nug:
self.nugmin[k] = self.nugmin[k].replace(
"self.shakemap.getLayer('pga').getData()",
"(np.exp(np.log(self.shakemap.getLayer('pga').getData())\
- self.numstd * self.uncert.getLayer('stdpga').getData()))"
)
self.nugmax[k] = self.nugmax[k].replace(
"self.shakemap.getLayer('pga').getData()",
"(np.exp(np.log(self.shakemap.getLayer('pga').getData())\
+ self.numstd * self.uncert.getLayer('stdpga').getData()))"
)
elif "self.shakemap.getLayer('pgv').getData()" in nug:
self.nugmin[k] = self.nugmin[k].replace(
"self.shakemap.getLayer('pgv').getData()",
"(np.exp(np.log(self.shakemap.getLayer('pgv').getData())\
- self.numstd * self.uncert.getLayer('stdpgv').getData()))"
)
self.nugmax[k] = self.nugmax[k].replace(
"self.shakemap.getLayer('pgv').getData()",
"(np.exp(np.log(self.shakemap.getLayer('pgv').getData())\
+ self.numstd * self.uncert.getLayer('stdpgv').getData()))"
)
elif "self.shakemap.getLayer('mmi').getData()" in nug:
self.nugmin[k] = self.nugmin[k].replace(
"self.shakemap.getLayer('mmi').getData()",
"(np.exp(np.log(self.shakemap.getLayer('mmi').getData())\
- self.numstd * self.uncert.getLayer('stdmmi').getData()))"
)
self.nugmax[k] = self.nugmax[k].replace(
"self.shakemap.getLayer('mmi').getData()",
"(np.exp(np.log(self.shakemap.getLayer('mmi').getData())\
+ self.numstd * self.uncert.getLayer('stdmmi').getData()))"
)
self.equationmin = ' + '.join(self.nugmin)
self.equationmax = ' + '.join(self.nugmax)
else:
self.equationmin = None
self.equationmax = None
self.geodict = self.shakemap.getGeoDict()
try:
self.slopemin = float(config[self.model]['slopemin'])
self.slopemax = float(config[self.model]['slopemax'])
except:
print(
'could not find slopemin and/or slopemax in config, no limits will be applied'
)
self.slopemin = 0.
self.slopemax = 90.
def __init__(self, config, shakefile, model, uncertfile=None):
"""Set up the logistic model
:param config: configobj (config .ini file read in using configobj) defining the model and its inputs
:type config: dictionary
:param shakefile: Full file path to shakemap.xml file for the event of interest
:type shakefile: string
:param model: Name of model defined in config that should be run for the event of interest
:type model: string
:param uncertfile:
:type uncertfile:
"""
if model not in getLogisticModelNames(config):
raise Exception('Could not find a model called "%s" in config %s.' % (model, config))
#do everything here short of calculations - parse config, assemble eqn strings, load data.
self.model = model
cmodel = config['logistic_models'][model]
self.modeltype = cmodel['gfetype']
self.coeffs = validateCoefficients(cmodel)
self.layers = validateLayers(cmodel) # key = layer name, value = file name
self.terms, timeField = validateTerms(cmodel, self.coeffs, self.layers)
self.interpolations = validateInterpolations(cmodel, self.layers)
self.units = validateUnits(cmodel, self.layers)
self.gmused = [value for term, value in cmodel['terms'].items() if 'pga' in value.lower() or 'pgv' in
value.lower() or 'mmi' in value.lower()]
self.modelrefs, self.longrefs, self.shortrefs = validateRefs(cmodel)
if 'baselayer' not in cmodel:
raise Exception('You must specify a base layer file in config.')
if cmodel['baselayer'] not in list(self.layers.keys()):
raise Exception('You must specify a base layer corresponding to one of the files in the layer section.')
#get the geodict for the shakemap
geodict = ShakeGrid.getFileGeoDict(shakefile, adjust='res')
griddict, eventdict, specdict, fields, uncertainties = getHeaderData(shakefile)
#YEAR = eventdict['event_timestamp'].year
MONTH = MONTHS[(eventdict['event_timestamp'].month)-1]
#DAY = eventdict['event_timestamp'].day
#HOUR = eventdict['event_timestamp'].hour
#now find the layer that is our base layer and get the largest bounds we can guarantee not to exceed shakemap bounds
basefile = self.layers[cmodel['baselayer']]
ftype = getFileType(basefile)
if ftype == 'esri':
basegeodict, firstcol = GDALGrid.getFileGeoDict(basefile)
sampledict = basegeodict.getBoundsWithin(geodict)
elif ftype == 'gmt':
basegeodict, firstcol = GMTGrid.getFileGeoDict(basefile)
sampledict = basegeodict.getBoundsWithin(geodict)
else:
raise Exception('All predictor variable grids must be a valid GMT or ESRI file type')
#now load the shakemap, resampling and padding if necessary
self.shakemap = ShakeGrid.load(shakefile, samplegeodict=sampledict, resample=True, doPadding=True, adjust='res')
# take uncertainties into account
if uncertfile is not None:
try:
self.uncert = ShakeGrid.load(uncertfile, samplegeodict=sampledict, resample=True, doPadding=True,
adjust='res')
except:
print('Could not read uncertainty file, ignoring uncertainties')
self.uncert = None
else:
self.uncert = None
#load the predictor layers into a dictionary
self.layerdict = {} # key = layer name, value = grid object
for layername, layerfile in self.layers.items():
if isinstance(layerfile, list):
for lfile in layerfile:
if timeField == 'MONTH':
if lfile.find(MONTH) > -1:
layerfile = lfile
ftype = getFileType(layerfile)
interp = self.interpolations[layername]
if ftype == 'gmt':
lyr = GMTGrid.load(layerfile, sampledict, resample=True, method=interp, doPadding=True)
elif ftype == 'esri':
lyr = GDALGrid.load(layerfile, sampledict, resample=True, method=interp, doPadding=True)
else:
msg = 'Layer %s (file %s) does not appear to be a valid GMT or ESRI file.' % (layername, layerfile)
raise Exception(msg)
self.layerdict[layername] = lyr
else:
#first, figure out what kind of file we have (or is it a directory?)
ftype = getFileType(layerfile)
interp = self.interpolations[layername]
if ftype == 'gmt':
lyr = GMTGrid.load(layerfile, sampledict, resample=True, method=interp, doPadding=True)
elif ftype == 'esri':
lyr = GDALGrid.load(layerfile, sampledict, resample=True, method=interp, doPadding=True)
else:
msg = 'Layer %s (file %s) does not appear to be a valid GMT or ESRI file.' % (layername, layerfile)
raise Exception(msg)
self.layerdict[layername] = lyr
shapes = {}
for layername, layer in self.layerdict.items():
shapes[layername] = layer.getData().shape
self.nuggets = [str(self.coeffs['b0'])]
ckeys = list(self.terms.keys())
ckeys.sort()
for key in ckeys:
term = self.terms[key]
coeff = self.coeffs[key]
self.nuggets.append('(%g * %s)' % (coeff, term))
self.equation = ' + '.join(self.nuggets)
if self.uncert is not None:
self.nugmin = copy.copy(self.nuggets)
self.nugmax = copy.copy(self.nuggets)
# Find the term with the shakemap input and replace for these nuggets
for k, nug in enumerate(self.nuggets):
if "self.shakemap.getLayer('pga').getData()" in nug:
self.nugmin[k] = self.nugmin[k].replace("self.shakemap.getLayer('pga').getData()", "(np.exp(np.log(self.shakemap.getLayer('pga').getData()) - self.uncert.getLayer('stdpga').getData()))")
self.nugmax[k] = self.nugmax[k].replace("self.shakemap.getLayer('pga').getData()", "(np.exp(np.log(self.shakemap.getLayer('pga').getData()) + self.uncert.getLayer('stdpga').getData()))")
elif "self.layerdict['pgv'].getData()" in nug:
self.nugmin[k] = self.nugmin[k].replace("self.shakemap.getLayer('pgv').getData()", "(np.exp(np.log(self.shakemap.getLayer('pgv').getData()) - self.uncert.getLayer('stdpgv').getData()))")
self.nugmax[k] = self.nugmax[k].replace("self.shakemap.getLayer('pgv').getData()", "(np.exp(np.log(self.shakemap.getLayer('pgv').getData()) + self.uncert.getLayer('stdpgv').getData()))")
elif "self.layerdict['mmi'].getData()" in nug:
self.nugmin[k] = self.nugmin[k].replace("self.shakemap.getLayer('mmi').getData()", "(np.exp(np.log(self.shakemap.getLayer('mmi').getData()) - self.uncert.getLayer('stdmmi').getData()))")
self.nugmax[k] = self.nugmax[k].replace("self.shakemap.getLayer('mmi').getData()", "(np.exp(np.log(self.shakemap.getLayer('mmi').getData()) + self.uncert.getLayer('stdmmi').getData()))")
self.equationmin = ' + '.join(self.nugmin)
self.equationmax = ' + '.join(self.nugmax)
else:
self.equationmin = None
self.equationmax = None
self.geodict = self.shakemap.getGeoDict()
try:
self.slopemin = float(config['logistic_models'][model]['slopemin'])
self.slopemax = float(config['logistic_models'][model]['slopemax'])
except:
print('could not find slopemin and/or slopemax in config, no limits will be applied')
self.slopemin = 0.
self.slopemax = 90.
def run_gfail(args):
"""Runs ground failure.
Args:
args: dictionary or argument parser Namespace output by bin/gfail
program.
Returns:
list: Names of created files.
"""
# TODO: ADD CONFIG VALIDATION STEP THAT MAKES SURE ALL THE FILES EXIST
filenames = []
# If args is a dictionary, convert to a Namespace
if isinstance(args, dict):
args = Namespace(**args)
if args.set_default_paths:
set_default_paths(args)
print('default paths set, continuing...\n')
if args.list_default_paths:
list_default_paths()
return
if args.reset_default_paths:
reset_default_paths()
return
if args.make_webpage:
# Turn on GIS and HDF5 flags
gis = True
hdf5 = True
else:
gis = args.gis
hdf5 = args.hdf5
# Figure out what models will be run
if args.shakefile is not None: # user intends to actually run some models
shakefile = args.shakefile
# make output location for things
if args.output_filepath is None:
outdir = os.getcwd()
else:
outdir = args.output_filepath
if (hdf5 or args.make_static_pngs or
args.make_static_pdfs or
args.make_interactive_plots or
gis):
if not os.path.exists(outdir):
os.makedirs(outdir)
# download if is url
# cleanup = False
if not os.path.isfile(shakefile):
if isURL(shakefile):
# getGridURL returns a named temporary file object
shakefile = getGridURL(shakefile)
# cleanup = True # Be sure to delete it after
else:
raise NameError('Could not find "%s" as a file or a valid url'
% (shakefile))
eventid = getHeaderData(shakefile)[0]['event_id']
# Get entire path so won't break if running gfail with relative path
shakefile = os.path.abspath(shakefile)
if args.extract_contents:
outfolder = outdir
else: # Nest in a folder named by eventid
outfolder = os.path.join(outdir, eventid)
if not os.path.exists(outfolder):
os.makedirs(outfolder)
# Copy shake grid into output directory
# --- this is base on advice from Mike that when running in production
# the shake grids are not archived and so if we need/want to have
# the exact grid used for the calculation later if there's every a
# question about how the calculation was done, the safest thing is
# to store a copy of it here.
shake_copy = os.path.join(outfolder, "grid.xml")
shutil.copyfile(shakefile, shake_copy)
# Write shakefile to a file for use later
shakename = os.path.join(outfolder, "shakefile.txt")
shake_file = open(shakename, "wt")
shake_file.write(shake_copy)
shake_file.close()
filenames.append(shakename)
config = args.config
if args.config_filepath is not None:
# only add config_filepath if full filepath not given and file
# ext is .ini
if (not os.path.isabs(config) and
os.path.splitext(config)[-1] == '.ini'):
config = os.path.join(args.config_filepath, config)
if os.path.splitext(config)[-1] == '.ini':
temp = ConfigObj(config)
if len(temp) == 0:
raise Exception(
'Could not find specified .ini file: %s' % config)
if args.data_path is not None:
temp = correct_config_filepaths(args.data_path, temp)
configs = [temp]
conffail = []
else:
# input is a list of config files
f = open(config, 'r')
configlist = f.readlines()
configs = []
conffail = []
for conf in configlist:
conf = conf.strip()
if not os.path.isabs(conf):
# only add config_filepath if full filepath not given
conf = os.path.join(args.config_filepath, conf)
try:
temp = ConfigObj(conf)
if temp:
if args.data_path is not None:
temp = correct_config_filepaths(
args.data_path, temp)
configs.append(temp)
else:
conffail.append(conf)
except:
conffail.append(conf)
print('\nRunning the following models:')
for conf in configs:
print('\t%s' % conf.keys()[0])
if len(conffail) > 0:
print('Could not find or read in the following config files:\n')
for conf in conffail:
print('\t%s' % conf)
print('\nContinuing...\n')
if args.set_bounds is not None:
if 'zoom' in args.set_bounds:
temp = args.set_bounds.split(',')
print('Using %s threshold of %1.1f to cut model bounds'
% (temp[1].strip(), float(temp[2].strip())))
bounds = get_bounds(shakefile, temp[1].strip(),
float(temp[2].strip()))
else:
temp = eval(args.set_bounds)
latmin = temp[0]
latmax = temp[1]
lonmin = temp[2]
lonmax = temp[3]
bounds = {'xmin': lonmin, 'xmax': lonmax,
'ymin': latmin, 'ymax': latmax}
print('Applying bounds of lonmin %1.2f, lonmax %1.2f, '
'latmin %1.2f, latmax %1.2f'
% (bounds['xmin'], bounds['xmax'],
bounds['ymin'], bounds['ymax']))
else:
bounds = None
if args.make_webpage or args.make_summary:
results = []
# pre-read in ocean trimming file polygons so only do this step once
if args.trimfile is not None:
if not os.path.exists(args.trimfile):
print('trimfile defined does not exist: %s\n'
'Ocean will not be trimmed.' % args.trimfile)
trimfile = None
elif os.path.splitext(args.trimfile)[1] != '.shp':
print('trimfile must be a shapefile, '
'ocean will not be trimmed')
trimfile = None
else:
trimfile = args.trimfile
else:
trimfile = None
# Get finite fault ready, if exists
ffault = None
point = True
if args.finite_fault is not None:
point = False
try:
if os.path.splitext(args.finite_fault)[-1] == '.txt':
ffault = text_to_json(args.finite_fault)
elif os.path.splitext(args.finite_fault)[-1] == '.json':
ffault = args.finite_fault
else:
print('Could not read in finite fault, will '
'try to download from comcat')
ffault = None
except:
print('Could not read in finite fault, will try to '
'download from comcat')
ffault = None
if ffault is None:
# Try to get finite fault file, if it exists
try:
returned_ev = get_event_comcat(shakefile)
if returned_ev is not None:
testjd, detail, temp = returned_ev
if 'faultfiles' in testjd['input']['event_information']:
ffilename = testjd['input']['event_information']['faultfiles']
if len(ffilename) > 0:
# Download the file
with tempfile.NamedTemporaryFile(delete=False, mode='w') as f:
temp.getContent(ffilename, filename=f.name)
ffault = text_to_json(f.name)
os.remove(f.name)
point = False
else:
point = True
else:
print('Unable to determine source type, unknown if finite'
' fault or point source')
ffault = None
point = False
except Exception as e:
print(e)
print('Unable to determine source type, unknown if finite'
' fault or point source')
ffault = None
point = False
# Loop over config files
for conf in configs:
modelname = conf.keys()[0]
print('\nNow running %s:' % modelname)
modelfunc = conf[modelname]['funcname']
if modelfunc == 'LogisticModel':
lm = LM.LogisticModel(shakefile, conf,
uncertfile=args.uncertfile,
saveinputs=args.save_inputs,
bounds=bounds,
numstd=float(args.std),
trimfile=trimfile)
maplayers = lm.calculate()
elif modelfunc == 'godt2008':
maplayers = godt2008(shakefile, conf,
uncertfile=args.uncertfile,
saveinputs=args.save_inputs,
bounds=bounds,
numstd=float(args.std),
trimfile=trimfile)
else:
print('Unknown model function specified in config for %s '
'model, skipping to next config' % modelfunc)
continue
# time1 = datetime.datetime.utcnow().strftime('%d%b%Y_%H%M')
# filename = ('%s_%s_%s' % (eventid, modelname, time1))
if args.appendname is not None:
filename = ('%s_%s_%s' % (eventid, modelname, args.appendname))
else:
filename = ('%s_%s' % (eventid, modelname))
if hdf5:
filenameh = filename + '.hdf5'
if os.path.exists(filenameh):
os.remove(filenameh)
savelayers(maplayers, os.path.join(outfolder, filenameh))
filenames.append(filenameh)
if args.make_static_pdfs or args.make_static_pngs:
plotorder, logscale, lims, colormaps, maskthreshes = \
parseConfigLayers(maplayers, conf)
mapconfig = ConfigObj(args.mapconfig)
kwargs = parseMapConfig(
mapconfig, fileext=args.mapdata_filepath)
junk, filenames1 = modelMap(
maplayers, shakefile,
suptitle=conf[modelname]['shortref'],
boundaries=None,
zthresh=0.,
lims=lims,
plotorder=plotorder,
maskthreshes=maskthreshes,
maproads=False,
mapcities=True,
colormaps=colormaps,
savepdf=args.make_static_pdfs,
savepng=args.make_static_pngs,
printparam=True,
inventory_shapefile=None,
outputdir=outfolder,
outfilename=filename,
scaletype='continuous',
logscale=logscale, **kwargs)
for filen in filenames1:
filenames.append(filen)
# make model only plots too
if len(maplayers) > 1:
plotorder, logscale, lims, colormaps, maskthreshes = \
parseConfigLayers(maplayers, conf, keys=['model'])
junk, filenames1 = modelMap(
maplayers, shakefile,
suptitle=conf[modelname]['shortref'], boundaries=None,
zthresh=0., lims=lims, plotorder=plotorder,
maskthreshes=maskthreshes, maproads=False,
mapcities=True, savepdf=args.make_static_pdfs,
savepng=args.make_static_pngs, printparam=True,
inventory_shapefile=None, outputdir=outfolder,
outfilename=filename + '-just_model',
colormaps=colormaps, scaletype='continuous',
logscale=logscale, **kwargs)
for filen in filenames1:
filenames.append(filen)
if args.make_interactive_plots:
plotorder, logscale, lims, colormaps, maskthreshes = \
parseConfigLayers(maplayers, conf)
junk, filenames1 = interactiveMap(
maplayers, plotorder=plotorder, shakefile=shakefile,
inventory_shapefile=None, maskthreshes=maskthreshes,
colormaps=colormaps, isScenario=False,
scaletype='continuous', lims=lims, logscale=logscale,
ALPHA=0.7, outputdir=outfolder, outfilename=filename,
tiletype='Stamen Terrain', separate=True,
faultfile=ffault)
for filen in filenames1:
filenames.append(filen)
if gis:
for key in maplayers:
# Get simplified name of key for file naming
RIDOF = '[+-]?(?=\d*[.eE])(?=\.?\d)'\
'\d*\.?\d*(?:[eE][+-]?\d+)?'
OPERATORPAT = '[\+\-\*\/]*'
keyS = re.sub(OPERATORPAT, '', key)
# remove floating point numbers
keyS = re.sub(RIDOF, '', keyS)
# remove parentheses
keyS = re.sub('[()]*', '', keyS)
# remove any blank spaces
keyS = keyS.replace(' ', '')
filen = os.path.join(outfolder, '%s_%s.bil'
% (filename, keyS))
fileh = os.path.join(outfolder, '%s_%s.hdr'
% (filename, keyS))
fileg = os.path.join(outfolder, '%s_%s.tif'
% (filename, keyS))
GDALGrid.copyFromGrid(maplayers[key]['grid']).save(filen)
cmd = 'gdal_translate -a_srs EPSG:4326 -of GTiff %s %s' % (
filen, fileg)
rc, so, se = get_command_output(cmd)
# Delete bil file and its header
os.remove(filen)
os.remove(fileh)
filenames.append(fileg)
if args.make_webpage:
# Compile into list of results for later
results.append(maplayers)
# Make binary output for ShakeCast
filef = os.path.join(outfolder, '%s_model.flt'
% filename)
# And get name of header
filefh = os.path.join(outfolder, '%s_model.hdr'
% filename)
# Make file
write_floats(filef, maplayers['model']['grid'])
filenames.append(filef)
filenames.append(filefh)
if args.make_summary and not args.make_webpage:
# Compile into list of results for later
results.append(maplayers)
eventid = getHeaderData(shakefile)[0]['event_id']
if not hasattr(args, 'eventsource'):
args.eventsource = 'us'
if not hasattr(args, 'eventsourcecode'):
args.eventsourcecode = eventid
if args.make_webpage:
outputs = hazdev(
results, configs,
shakefile, outfolder=outfolder,
pop_file=args.popfile,
pager_alert=args.property_alertlevel,
eventsource=args.eventsource,
eventsourcecode=args.eventsourcecode)
filenames = filenames + outputs
if args.make_summary:
outputs = GFSummary(
results, configs, args.web_template,
shakefile, outfolder=outfolder, cleanup=True,
faultfile=ffault, point=point, pop_file=args.popfile)
filenames = filenames + outputs
# # create transparent png file
# outputs = create_png(outdir)
# filenames = filenames + outputs
#
# # create info file
# infofile = create_info(outdir)
# filenames = filenames + infofile
print('\nFiles created:\n')
for filen in filenames:
print('%s' % filen)
return filenames
def holzer_liq(shakefile,
config,
uncertfile=None,
saveinputs=False,
modeltype=None,
displmodel=None,
probtype=None,
bounds=None):
"""
Method for computing the probability of liquefaction using the Holzer method
using the Wills et al. (2015) Vs30 map of California to define the
susceptibility classes and the Fan et al. global water table model.
"""
layers = config['holzer_liq_cal']['layers']
vs30_file = layers['vs30']['file']
wtd_file = layers['watertable']['file']
shkgdict = ShakeGrid.getFileGeoDict(shakefile)
fgeodict = GMTGrid.getFileGeoDict(vs30_file)[0]
#---------------------------------------------------------------------------
# Loading info
#---------------------------------------------------------------------------
shakemap = ShakeGrid.load(shakefile,
fgeodict,
resample=True,
method='linear',
doPadding=True)
PGA = shakemap.getLayer('pga').getData() / 100 # convert to g
griddict, eventdict, specdict, fields, uncertainties = getHeaderData(
shakefile)
mag = eventdict['magnitude']
#---------------------------------------------------------------------------
# Logistic funciton parameters from Vs30
#---------------------------------------------------------------------------
vs30_grid = GMTGrid.load(vs30_file)
vs30 = vs30_grid.getData()
a0 = np.zeros_like(vs30)
b0 = np.zeros_like(vs30)
c0 = np.zeros_like(vs30)
a1 = np.zeros_like(vs30)
b1 = np.zeros_like(vs30)
c1 = np.zeros_like(vs30)
for k, v in config['holzer_liq_cal']['parameters'].items():
ind = np.where(vs30 == float(v[0]))
a0[ind] = v[1]
b0[ind] = v[2]
c0[ind] = v[3]
a1[ind] = v[4]
b1[ind] = v[5]
c1[ind] = v[6]
#---------------------------------------------------------------------------
# Water table
#---------------------------------------------------------------------------
wtd_grid = GMTGrid.load(wtd_file,
fgeodict,
resample=True,
method=layers['watertable']['interpolation'],
doPadding=True)
tmp = wtd_grid._data
tmp = np.nan_to_num(tmp)
# Compute water weights
w0, w1 = get_water_weights(tmp)
#---------------------------------------------------------------------------
# Compute probability of liquefaction
#---------------------------------------------------------------------------
prob0 = get_prob(PGA, a0, b0, c0, mag)
prob1 = get_prob(PGA, a1, b1, c1, mag)
prob = prob0 * w0 + prob1 * w1
#---------------------------------------------------------------------------
# Turn output and inputs into into grids and put in maplayers dictionary
#---------------------------------------------------------------------------
maplayers = collections.OrderedDict()
temp = shakemap.getShakeDict()
shakedetail = '%s_ver%s' % (temp['shakemap_id'], temp['shakemap_version'])
modelsref = config['holzer_liq_cal']['shortref']
modellref = config['holzer_liq_cal']['longref']
modeltype = 'Holzer/Wills'
maplayers['model'] = {
'grid': GDALGrid(prob, fgeodict),
'label': 'Probability',
'type': 'output',
'description': {
'name': modelsref,
'longref': modellref,
'units': 'coverage',
'shakemap': shakedetail,
'parameters': {
'modeltype': modeltype
}
}
}
if saveinputs is True:
maplayers['pga'] = {
'grid': GDALGrid(PGA, fgeodict),
'label': 'PGA (g)',
'type': 'input',
'description': {
'units': 'g',
'shakemap': shakedetail
}
}
maplayers['vs30'] = {
'grid': GDALGrid(vs30, fgeodict),
'label': 'Vs30 (m/s)',
'type': 'input',
'description': {
'units': 'm/s'
}
}
maplayers['wtd'] = {
'grid': GDALGrid(wtd_grid._data, fgeodict),
'label': 'wtd (m)',
'type': 'input',
'description': {
'units': 'm'
}
}
return maplayers
def slhrf_liq(shakefile, config, uncertfile=None, saveinputs=False,
modeltype=None, displmodel=None,
probtype=None, bounds=None):
"""
Method for computing the probability of liquefaction using the SLHRF,
primarily relying on the Wills et al. (2015) Vs30 map of California and
Hydrosheds distance to rivers.
"""
layers = config['slhrf_liq_cal']['layers']
vs30_file = layers['vs30']['file']
elev_file = layers['elev']['file']
dc_file = layers['dc']['file']
dr_file = layers['dr']['file']
fgeodict = GMTGrid.getFileGeoDict(vs30_file)[0]
#---------------------------------------------------------------------------
# Read in data layers
#---------------------------------------------------------------------------
shakemap = ShakeGrid.load(shakefile, fgeodict, resample=True,
method='linear', doPadding=True)
PGA = shakemap.getLayer('pga').getData()/100 # convert to g
griddict,eventdict,specdict,fields,uncertainties = getHeaderData(shakefile)
mag = eventdict['magnitude']
vs30_grid = GMTGrid.load(vs30_file)
vs30 = vs30_grid.getData()
elev = GDALGrid.load(elev_file, fgeodict, resample=True,
method=layers['elev']['interpolation'],
doPadding = True).getData()
dc = GDALGrid.load(dc_file, fgeodict, resample=True,
method=layers['dc']['interpolation'],
doPadding = True).getData()
dr = GDALGrid.load(dr_file, fgeodict, resample=True,
method=layers['dr']['interpolation'],
doPadding = True).getData()
dw = np.minimum(dr, dc)
#---------------------------------------------------------------------------
# Evaluate the different factors
#---------------------------------------------------------------------------
Fgeo = np.zeros_like(vs30)
for k,v in config['slhrf_liq_cal']['parameters'].items():
ind = np.where(vs30 == float(v[0]))
Fgeo[ind] = float(v[1])
Fz = z_factor(elev)
Fmag = mag_factor(mag)
Fpga = pga_factor(PGA)
Fdw = dw_factor(dw)
Fnehrp = nehrp_factor(vs30)
#---------------------------------------------------------------------------
# Combine factors
#---------------------------------------------------------------------------
SLHRF = Fz * Fmag * Fpga * Fdw * Fgeo * Fnehrp
# Transform into a 'probability'
prob = 0.4 * (1 - np.exp(-0.2 * SLHRF**2) )
#---------------------------------------------------------------------------
# Turn output and inputs into into grids and put in maplayers dictionary
#---------------------------------------------------------------------------
maplayers = collections.OrderedDict()
temp = shakemap.getShakeDict()
shakedetail = '%s_ver%s' % (temp['shakemap_id'], temp['shakemap_version'])
modelsref = config['slhrf_liq_cal']['shortref']
modellref = config['slhrf_liq_cal']['longref']
modeltype = 'SLHRF/Wills'
maplayers['model'] = {'grid': GDALGrid(prob, fgeodict),
'label': 'Probability',
'type': 'output',
'description': {'name': modelsref,
'longref': modellref,
'units': 'coverage',
'shakemap': shakedetail,
'parameters': {'modeltype': modeltype}
}
}
if saveinputs is True:
maplayers['slhrf'] = {'grid': GDALGrid(SLHRF, fgeodict),
'label': 'SLHRF',
'type': 'input',
'description': {'units': 'none'}}
maplayers['pga'] = {'grid': GDALGrid(PGA, fgeodict),
'label': 'PGA (g)',
'type': 'input',
'description': {'units': 'g', 'shakemap': shakedetail}}
maplayers['vs30'] = {'grid': GDALGrid(vs30, fgeodict),
'label': 'Vs30 (m/s)',
'type': 'input',
'description': {'units': 'm/s'}}
maplayers['dw'] = {'grid': GDALGrid(dw, fgeodict),
'label': 'dw (km)',
'type': 'input',
'description': {'units': 'km'}}
maplayers['elev'] = {'grid': GDALGrid(elev, fgeodict),
'label': 'elev (m)',
'type': 'input',
'description': {'units': 'm'}}
maplayers['FPGA'] = {'grid': GDALGrid(Fpga, fgeodict),
'label': 'Fpga',
'type': 'input',
'description': {'units': 'none'}}
maplayers['FDW'] = {'grid': GDALGrid(Fdw, fgeodict),
'label': 'Fdw',
'type': 'input',
'description': {'units': 'none'}}
maplayers['FGEO'] = {'grid': GDALGrid(Fgeo, fgeodict),
'label': 'Fgeo',
'type': 'input',
'description': {'units': 'none'}}
maplayers['FZ'] = {'grid': GDALGrid(Fz, fgeodict),
'label': 'Fz',
'type': 'input',
'description': {'units': 'none'}}
maplayers['FNEHRP'] = {'grid': GDALGrid(Fnehrp, fgeodict),
'label': 'Fnehrp',
'type': 'input',
'description': {'units': 'none'}}
return maplayers
def main(pargs, config):
# get the users home directory
homedir = os.path.expanduser("~")
# handle cancel messages
if pargs.cancel:
# we presume that pargs.gridfile in this context is an event ID.
msg = _cancel(pargs.gridfile, config)
print(msg)
return True
# what kind of thing is gridfile?
is_file = os.path.isfile(pargs.gridfile)
is_url, url_gridfile = _is_url(pargs.gridfile)
is_pdl, pdl_gridfile = _check_pdl(pargs.gridfile, config)
if is_file:
gridfile = pargs.gridfile
elif is_url:
gridfile = url_gridfile
elif is_pdl:
gridfile = pdl_gridfile
else:
print("ShakeMap Grid file %s does not exist." % pargs.gridfile)
return False
pager_folder = os.path.join(homedir, config["output_folder"])
pager_archive = os.path.join(homedir, config["archive_folder"])
admin = PagerAdmin(pager_folder, pager_archive)
# stdout will now be logged as INFO, stderr will be logged as WARNING
mail_host = config["mail_hosts"][0]
mail_from = config["mail_from"]
developers = config["developers"]
logfile = os.path.join(pager_folder, "pager.log")
plog = PagerLogger(logfile, developers, mail_from, mail_host, debug=pargs.debug)
logger = plog.getLogger()
try:
eid = None
pager_version = None
# get all the basic event information and print it, if requested
shake_tuple = getHeaderData(gridfile)
eid = shake_tuple[1]["event_id"].lower()
etime = shake_tuple[1]["event_timestamp"]
if not len(eid):
eid = shake_tuple[0]["event_id"].lower()
network = shake_tuple[1]["event_network"].lower()
if network == "":
network = "us"
if not eid.startswith(network):
eid = network + eid
# Create a ComcatInfo object to hopefully tell us a number of things about this event
try:
ccinfo = ComCatInfo(eid)
location = ccinfo.getLocation()
tsunami = ccinfo.getTsunami()
authid, allids = ccinfo.getAssociatedIds()
authsource, othersources = ccinfo.getAssociatedSources()
except: # fail over to what we can determine locally
location = shake_tuple[1]["event_description"]
tsunami = shake_tuple[1]["magnitude"] >= TSUNAMI_MAG_THRESH
authid = eid
authsource = network
allids = []
# location field can be empty (None), which breaks a bunch of things
if location is None:
location = ""
# Check to see if user wanted to override default tsunami criteria
if pargs.tsunami != "auto":
if pargs.tsunami == "on":
tsunami = True
else:
tsunami = False
# check to see if this event is a scenario
is_scenario = False
shakemap_type = shake_tuple[0]["shakemap_event_type"]
if shakemap_type == "SCENARIO":
is_scenario = True
# if event is NOT a scenario and event time is in the future,
# flag the event as a scenario and yell about it.
if etime > datetime.datetime.utcnow():
is_scenario = True
logger.warning(
"Event origin time is in the future! Flagging this as a scenario."
)
if is_scenario:
if re.search("scenario", location.lower()) is None:
location = "Scenario " + location
# create the event directory (if it does not exist), and start logging there
logger.info("Creating event directory")
event_folder = admin.createEventFolder(authid, etime)
# Stop processing if there is a "stop" file in the event folder
stopfile = os.path.join(event_folder, "stop")
if os.path.isfile(stopfile):
fmt = '"stop" file found in %s. Stopping processing, returning with 1.'
logger.info(fmt % (event_folder))
return True
pager_version = get_pager_version(event_folder)
version_folder = os.path.join(event_folder, "version.%03d" % pager_version)
os.makedirs(version_folder)
event_logfile = os.path.join(version_folder, "event.log")
# this will turn off the global rotating log file
# and switch to the one in the version folder.
plog.setVersionHandler(event_logfile)
# Copy the grid.xml file to the version folder
# sometimes (usu when testing) the input grid isn't called grid.xml. Rename it here.
version_grid = os.path.join(version_folder, "grid.xml")
shutil.copyfile(gridfile, version_grid)
# Check to see if the tsunami flag has been previously set
tsunami_toggle = {"on": 1, "off": 0}
tsunami_file = os.path.join(event_folder, "tsunami")
if os.path.isfile(tsunami_file):
tsunami = tsunami_toggle[open(tsunami_file, "rt").read().strip()]
# get the rest of the event info
etime = shake_tuple[1]["event_timestamp"]
elat = shake_tuple[1]["lat"]
elon = shake_tuple[1]["lon"]
emag = shake_tuple[1]["magnitude"]
# get the year of the event
event_year = shake_tuple[1]["event_timestamp"].year
# find the population data collected most closely to the event_year
pop_year, popfile = _get_pop_year(
event_year, config["model_data"]["population_data"]
)
logger.info("Population year: %i Population file: %s\n" % (pop_year, popfile))
# Get exposure results
logger.info("Calculating population exposure.")
isofile = config["model_data"]["country_grid"]
expomodel = Exposure(popfile, pop_year, isofile)
exposure = None
exposure = expomodel.calcExposure(gridfile)
# incidentally grab the country code of the epicenter
numcode = expomodel._isogrid.getValue(elat, elon)
if np.isnan(numcode):
cdict = None
else:
cdict = Country().getCountry(int(numcode))
if cdict is None:
ccode = "UK"
else:
ccode = cdict["ISO2"]
logger.info("Country code at epicenter is %s" % ccode)
# get fatality results, if requested
logger.info("Calculating empirical fatalities.")
fatmodel = EmpiricalLoss.fromDefaultFatality()
fatdict = fatmodel.getLosses(exposure)
# get economic results, if requested
logger.info("Calculating economic exposure.")
econexpmodel = EconExposure(popfile, pop_year, isofile)
ecomodel = EmpiricalLoss.fromDefaultEconomic()
econexposure = econexpmodel.calcExposure(gridfile)
ecodict = ecomodel.getLosses(econexposure)
shakegrid = econexpmodel.getShakeGrid()
# Get semi-empirical losses
logger.info("Calculating semi-empirical fatalities.")
urbanfile = config["model_data"]["urban_rural_grid"]
if not os.path.isfile(urbanfile):
raise PagerException("Urban-rural grid file %s does not exist." % urbanfile)
semi = SemiEmpiricalFatality.fromDefault()
semi.setGlobalFiles(popfile, pop_year, urbanfile, isofile)
semiloss, resfat, nonresfat = semi.getLosses(gridfile)
# get all of the other components of PAGER
logger.info("Getting all comments.")
# get the fatality and economic comments
impact1, impact2 = get_impact_comments(
fatdict, ecodict, econexposure, event_year, ccode
)
# get comment describing vulnerable structures in the region.
struct_comment = get_structure_comment(resfat, nonresfat, semi)
# get the comment describing historic secondary hazards
secondary_comment = get_secondary_comment(elat, elon, emag)
# get the comment describing historical comments in the region
historical_comment = get_historical_comment(elat, elon, emag, exposure, fatdict)
# generate the probability plots
logger.info("Drawing probability plots.")
fat_probs_file, eco_probs_file = _draw_probs(
fatmodel, fatdict, ecomodel, ecodict, version_folder
)
# generate the exposure map
exposure_base = os.path.join(version_folder, "exposure")
logger.info("Generating exposure map...")
oceanfile = config["model_data"]["ocean_vectors"]
oceangrid = config["model_data"]["ocean_grid"]
cityfile = config["model_data"]["city_file"]
borderfile = config["model_data"]["border_vectors"]
shake_grid = expomodel.getShakeGrid()
pop_grid = expomodel.getPopulationGrid()
pdf_file, png_file, mapcities = draw_contour(
shake_grid,
pop_grid,
oceanfile,
oceangrid,
cityfile,
exposure_base,
borderfile,
is_scenario=is_scenario,
)
logger.info("Generated exposure map %s" % pdf_file)
# figure out whether this event has been "released".
is_released = _get_release_status(
pargs,
config,
fatmodel,
fatdict,
ecomodel,
ecodict,
shake_tuple,
event_folder,
)
# Create a data object to encapsulate everything we know about the PAGER
# results, and then serialize that to disk in the form of a number of JSON files.
logger.info("Making PAGER Data object.")
doc = PagerData()
timezone_file = config["model_data"]["timezones_file"]
elapsed = pargs.elapsed
doc.setInputs(
shakegrid,
timezone_file,
pager_version,
shakegrid.getEventDict()["event_id"],
authid,
tsunami,
location,
is_released,
elapsed=elapsed,
)
logger.info("Setting inputs.")
doc.setExposure(exposure, econexposure)
logger.info("Setting exposure.")
doc.setModelResults(
fatmodel, ecomodel, fatdict, ecodict, semiloss, resfat, nonresfat
)
logger.info("Setting comments.")
doc.setComments(
impact1, impact2, struct_comment, historical_comment, secondary_comment
)
logger.info("Setting map info.")
doc.setMapInfo(cityfile, mapcities)
logger.info("Validating.")
doc.validate()
# if we have determined that the event is a scenario (origin time is in the future)
# and the shakemap is not flagged as such, set the shakemap type in the
# pagerdata object to be 'SCENARIO'.
if is_scenario:
doc.setToScenario()
json_folder = os.path.join(version_folder, "json")
os.makedirs(json_folder)
logger.info("Saving output to JSON.")
doc.saveToJSON(json_folder)
logger.info("Saving output to XML.")
doc.saveToLegacyXML(version_folder)
logger.info("Creating onePAGER pdf...")
onepager_pdf, error = create_onepager(doc, version_folder)
if onepager_pdf is None:
raise PagerException("Could not create onePAGER output: \n%s" % error)
# copy the contents.xml file to the version folder
contentsfile = get_data_path("contents.xml")
if contentsfile is None:
raise PagerException("Could not find contents.xml file.")
shutil.copy(contentsfile, version_folder)
# send pdf as attachment to internal team of PAGER users
if not is_released and not is_scenario:
message_pager(config, onepager_pdf, doc)
# run transfer, as appropriate and as specified by config
# the PAGER product eventsource and eventsourcecode should
# match the input ShakeMap settings for these properties.
# This can possibly cause confusion if a regional ShakeMap is
# trumped with one from NEIC, but this should happen less often
# than an NEIC origin being made authoritative over a regional one.
eventsource = network
eventsourcecode = eid
res, msg = transfer(
config,
doc,
eventsourcecode,
eventsource,
version_folder,
is_scenario=is_scenario,
)
logger.info(msg)
if not res:
logger.critical('Error transferring PAGER content. "%s"' % msg)
print("Created onePAGER pdf %s" % onepager_pdf)
logger.info("Created onePAGER pdf %s" % onepager_pdf)
logger.info("Done.")
return True
except Exception as e:
f = io.StringIO()
traceback.print_exc(file=f)
msg = e
msg = "%s\n %s" % (str(msg), f.getvalue())
hostname = socket.gethostname()
msg = msg + "\n" + "Error occurred on %s\n" % (hostname)
if gridfile is not None:
msg = msg + "\n" + "Error on file: %s\n" % (gridfile)
if eid is not None:
msg = msg + "\n" + "Error on event: %s\n" % (eid)
if pager_version is not None:
msg = msg + "\n" + "Error on version: %i\n" % (pager_version)
f.close()
logger.critical(msg)
logger.info("Sent error to email")
return False
