def _pvoc(self, X_hat, Phi_hat=None, R=None):
"""
::
a phase vocoder - time-stretch
inputs:
X_hat - estimate of signal magnitude
[Phi_hat] - estimate of signal phase
[R] - resynthesis hop ratio
output:
updates self.X_hat with modified complex spectrum
"""
N = self.nfft
W = self.wfft
H = self.nhop
R = 1.0 if R is None else R
dphi = (2 * P.pi * H * P.arange(N / 2 + 1)) / N
print("Phase Vocoder Resynthesis...", N, W, H, R)
A = P.angle(self.STFT) if Phi_hat is None else Phi_hat
phs = A[:, 0]
self.X_hat = []
n_cols = X_hat.shape[1]
t = 0
while P.floor(t) < n_cols:
tf = t - P.floor(t)
idx = P.arange(2) + int(P.floor(t))
idx[1] = n_cols - 1 if t >= n_cols - 1 else idx[1]
Xh = X_hat[:, idx]
Xh = (1 - tf) * Xh[:, 0] + tf * Xh[:, 1]
self.X_hat.append(Xh * P.exp(1j * phs))
U = A[:, idx[1]] - A[:, idx[0]] - dphi
U = U - P.np.round(U / (2 * P.pi)) * 2 * P.pi
phs += (U + dphi)
t += P.randn() * P.sqrt(PVOC_VAR * R) + R # 10% variance
self.X_hat = P.np.array(self.X_hat).T
def ThreeD_Scatter(x, y, z, selected_checkboxes, panel, auto_rotate, axis_3d=True):
ax = Axes3D(panel.fig)
ax.grid(False)
ax.set_xlabel(selected_checkboxes[0][1])
ax.set_ylabel(selected_checkboxes[1][1])
ax.set_zlabel(selected_checkboxes[2][1])
ax.set_xlim(np.min(x), np.max(x))
ax.set_ylim(np.min(y), np.max(y))
ax.set_ylim(np.min(z), np.max(z))
if not axis_3d:
ax._axis3don = False
ax.scatter3D(x, y, z, s=15, c= plt.randn(len(x)))
# ax.plot_surface(x, y, z, s=1)
# def onpick(event):
# ind = event.ind[0]
# x, y, z = event.artist._offsets3d
# print x[ind], y[ind], z[ind]
# panel.fig.canvas.mpl_connect('pick_event', onpick)
if auto_rotate:
for i in xrange(0,360,5):
ax._axis3don = axis_3d
ax.view_init(elev=10. +i, azim=i)
panel.canvas.draw()
return
panel.canvas.draw()
return
def TwoD_Scatter(x, y, selected_checkboxes, panel, s=None, c=None):
"""
This method is used to plot a two dimensional graphs on the basis of the selected checkboxes from the pyscrolledwindow
s is the size of the points being drawn
c is the color of the points being drawn
"""
if c is None:
c = "b"
if s is None:
s = 10
plt.xlabel(selected_checkboxes[0][1])
plt.ylabel(selected_checkboxes[1][1])
try:
panel.canvas.figure.clf()
plt.xlim(np.min(x), np.max(x))
plt.ylim(np.min(y), np.max(y))
plt.grid(True)
scatter = plt.scatter(x,
y,
marker="o",
s=s,
c=plt.randn(len(x)),
picker=True)
plt.subplots_adjust(left=0.05, right=0.94, top=0.95, bottom=0.09)
except:
try:
panel.canvas.figure.clf()
ax = panel.canvas.figure.add_subplot(111)
y_ticks = list(set(y))
ax.set_yticks(range(len(y_ticks)))
ax.set_yticklabels(y_ticks)
for direction in ["left", "right", "top", "bottom"]:
ax.spines[direction].set_color("none")
y_data = [y_ticks.index(element) for element in y]
plt.scatter(x, y_data)
except:
panel.canvas.figure.clf()
ax = panel.canvas.figure.add_subplot(111)
y_ticks = list(set(y))
ax.set_yticks(range(len(y_ticks)))
ax.set_yticklabels(y_ticks)
for direction in ["left", "right", "top", "bottom"]:
ax.spines[direction].set_color("none")
y_data = [y_ticks.index(element) for element in y]
x_ticks = list(set(x))
ax.set_xticks(range(len(x_ticks)))
ax.set_xticklabels(x_ticks)
x_data = [x_ticks.index(element) for element in x]
plt.scatter(x_data, y_data)
panel.canvas.draw()
return
def TwoD_Scatter(x, y, selected_checkboxes, panel, s=None, c=None):
"""
This method is used to plot a two dimensional graphs on the basis of the selected checkboxes from the pyscrolledwindow
s is the size of the points being drawn
c is the color of the points being drawn
"""
if c is None:
c = "b"
if s is None:
s= 10
plt.xlabel(selected_checkboxes[0][1])
plt.ylabel(selected_checkboxes[1][1])
try:
panel.canvas.figure.clf()
plt.xlim(np.min(x), np.max(x))
plt.ylim(np.min(y), np.max(y))
plt.grid(True)
scatter = plt.scatter(x, y,marker="o", s=s, c=plt.randn(len(x)), picker= True)
plt.subplots_adjust(left=0.05, right=0.94, top=0.95, bottom=0.09)
except:
try:
panel.canvas.figure.clf()
ax = panel.canvas.figure.add_subplot(111)
y_ticks = list(set(y))
ax.set_yticks(range(len(y_ticks)))
ax.set_yticklabels(y_ticks)
for direction in ["left", "right", "top", "bottom"]:
ax.spines[direction].set_color("none")
y_data= [y_ticks.index(element) for element in y]
plt.scatter(x, y_data)
except:
panel.canvas.figure.clf()
ax = panel.canvas.figure.add_subplot(111)
y_ticks = list(set(y))
ax.set_yticks(range(len(y_ticks)))
ax.set_yticklabels(y_ticks)
for direction in ["left", "right", "top", "bottom"]:
ax.spines[direction].set_color("none")
y_data= [y_ticks.index(element) for element in y]
x_ticks = list(set(x))
ax.set_xticks(range(len(x_ticks)))
ax.set_xticklabels(x_ticks)
x_data= [x_ticks.index(element) for element in x]
plt.scatter(x_data, y_data)
panel.canvas.draw()
return
#% 16 = rand3 17 = rand9 18 = rand10 19 = 0.8 20 = sineroot27
#% 21 = sineroot19 22 = sineroot50 23 = sineroot75
#% 24 = sineroot10 25 = sineroot110 26 = sineroot75tenth
#% 27 = sineroots20plus40 28 = sineroot75third
#% 29 = sineroot243 30 = sineroot150 31 = sineroot200
#% 32 = sine10pt587352723 33 = sine10pt10.387352723
#% 34 = rand7 35 = sine12 36 = rand5 37 = sine11
#% 38 = sine10pt17352723 39 = sine5 40 = sine6
#% 41 = sine7 42 = sine8 43 = sine9 44 = sine12
#% 45 = sine13 46 = sine14 47 = sine10.8342522
#% 48 = sine11.8522311 49 = sine12.5223223 50 = sine13.1900453
#% 51 = sine7.1900453 52 = sine7.9004531 53 = sine8.4900453
#% 54 = sine9.1900453 55 = sine5.19004 56 = sine5.8045
#% 57 = sine6.49004 58 = sine6.9004 59 = sine13.9004
#%%% Initializations
plt.randn('state', randstate)
np.random.rand('twister', randstate)
I = np.eye(Netsize)
Np = length(patts)
#% Create raw weights
if newNets:
if Netsize<=20.:
Netconnectivity = 1.
else:
Netconnectivity = 10./Netsize
WRaw = generate_internal_weights(Netsize, Netconnectivity)
WinRaw = plt.randn(Netsize, 1.)
WbiasRaw = plt.randn(Netsize, 1.)
import matplotlib.pyplot as plt
import matplotlib.pylab as pl
plt.plot([1,2,3,4])
plt.ylabel('some numbers')
plt.savefig('pyplot01.png', format='png')
plt.hist(pl.randn(100000), 50)
plt.savefig('pyplot_randn_hist.png', format='png')
def make_lor9d(tau_sec, numtrials, siglen_pre, kerlen_ratio, fs_Hz_pre, downsample):
# Local Variables: siglen_pre, xlim, kerlen_ratio, psd_from_fft, psd_fft, sc_d_0, sc_rep, downsample, s2, tt, sc_d, var, kerlen, tau_sec, df, i0, c, psd, varinfo, numtrials, name, fs_Hz_post, siglen_post, VERBOSE, f, i, signal, freqs, kern, fs_Hz_pre, s, sc, x
# Function calls: autocorrel, figure, warning, fprintf, make_lor9d, diff, find, size, plot, randn, conv, floor, reshape, sum, nargout, zeros, length, pi, sort, fftpsd, atan, squeeze, mod, decimate, exp, clf, mean
#%9d: downsamples as well
#%
#%tau_sec in seconds. (can be big)
#%siglen in samples.
#%kerlen_ratio is about 2,3,4,...
#%
#%returns:
#% signal: trials x siglen
#% psd and varinfo are generated only if demanded.
#% only if varinfo is mentioned, the 8 variances are printed.
#%main method imported from simulate_lorentzian8.m
#%known problems:
#% 1-bad at low fs_Hz (?)
#% 2- bad at low tau_sec
#% But ok for natural ranges (e.g., A1 cortex data)
VERBOSE = True
#%for debuging
if VERBOSE:
print 'tau=%g(ms), trials=%d, len=%d (before downsampling), ker x=%g'%(tau_sec*1000., numtrials, siglen_pre, kerlen_ratio)
if tau_sec > siglen_pre / fs_Hz_pre:
matcompat.warning('tau_sec > T')
#% although the result will be correct
#%making the kernel
kerlen = np.dot(kerlen_ratio, tau_sec)
tt = np.arange(0., (kerlen)+(1./fs_Hz_pre), 1./fs_Hz_pre)
kern = np.exp((-tt / tau_sec))
if VERBOSE:
#%this should be close to 1.0 :
print('%g ?= 1.0\n'%( ((np.sum(kern) / tau_sec) / fs_Hz_pre)))
#%pre = before downsampling
#%post = after downsampling
siglen_post = (siglen_pre / downsample)
#%making the signal.
signal = np.zeros([numtrials, siglen_post])
for i in np.arange(1., (numtrials)+1):
#%notes in simulate_lorentzian6.m
#%notes in simulate_lorentzian6.m
#s = plt.randn(1., (siglen_pre+len(kern)*2.+4.))
s = plt.randn( (siglen_pre+len(kern)*2.+4.))
#print s.shape
#%+2!!
xlim = len(kern)+np.array(np.hstack((1., siglen_pre)))-1.+1.+2.
#%throwing away a few extra samples (for very long correlation lengths)
#s2 = np.dot(plt.conv(s, matdiv(kern, fs_Hz_pre)), fs_Hz_pre)
#print s.shape
#print (kern / fs_Hz_pre).shape
s2 = np.convolve(s, kern / fs_Hz_pre)* fs_Hz_pre
#%integration
sc = s2[int(xlim[0])-1:xlim[1]]
#%cut the useful portion
#%signal(i,:) = sc; %s2
#%downsampling
#%assert(mod(siglen_pre,downsample)==0);
#%if 1
#%sc_rep=reshape(sc,[1,siglen_pre/downsample,downsample]); %1 trial
#sc_rep = np.reshape(sc, np.array(np.hstack((1., downsample, matdiv(siglen_pre, downsample)))))
sc_rep = np.reshape(sc, [1, downsample, siglen_pre/ downsample])
#%1 trial
#%assert(floor(siglen_pre/downsample)==siglen_post)
#%sc_d_0=mean(sc_rep,3);
sc_d_0 = np.mean(sc_rep, axis=2-1)
#%siglen_b=siglen/downsample;
#%end
#print signal.shape
#print i,
#sc_d = matcompat.decimate(sc, downsample)
sc_d = sc[0::downsample]
#signal[int(i)-1,:] = sc_d
#print sc_d.shape
signal[int(i)-1][:] = sc_d
#%s2
#%A=0
#%if A
if False:
plt.figure(1.)
plt.clf
plt.plot((np.arange(1., (siglen_post)+1)-1.), np.squeeze(sc_d_0))
plt.hold(on)
plt.plot((np.arange(1., (siglen_post)+1)-1.), sc_d, 'r')
#%plot((1:length(sc))/4/5+1,squeeze(sc),'k')
plt.plot(matdiv(np.arange(1., (siglen_pre)+1)-1., downsample), np.squeeze(sc), 'k')
#%end
#%end
#fs_Hz_post = matdiv(fs_Hz_pre, downsample)
fs_Hz_post = fs_Hz_pre / downsample
#%making & testing the fft
#%FFT is done on DOWNSAMPLED signals (after downsampling)
#% Only if fft psd is demanded. If not, only the signal is generated
nargout = 1000 #extra_output +1
if nargout > 1.:
[psd_from_fft, freqs] = fftpsd(signal, fs_Hz_post)
#psd_fft = np.array([])
psd_fft_psd = psd_from_fft
psd_fft_f = freqs
psd_fft = (psd_fft_psd,psd_fft_f)
if nargout > 2:
varinfo = [{},{},{},{},{},{},{}] #np.array([])
#%there are eight (!!) variance measures that can be used for normalization!!
#%please note that the variance rate (i.e., var(:)/fs_Hz_post) is multiplied by fs_Hz_post.
#% to get the approximation for var(signal(:))
df = np.mean(np.diff(np.sort(freqs)))
#%=1.0!
varinfo[0]['_name'] = 'fft'
varinfo[0]['_var'] = ((np.dot(np.sum(psd_from_fft), df) / fs_Hz_post)* fs_Hz_post)
varinfo[1]['_name'] = 'vertical variance'
#%var_v; % var_1;%varinfo(2)['_name']='mean(var(dim1))';
#varinfo(2).var = mean(var(signal,[0],1))/fs_Hz_post * fs_Hz_post;
varinfo[1]['_var'] = np.mean(np.var(signal,axis=0).flatten()) / fs_Hz_post* fs_Hz_post
varinfo[2]['_name'] = 'var(:)'
#%var_2;
#varinfo(3).var = var(signal(:))/fs_Hz_post * fs_Hz_post;
varinfo[2]['_var'] = np.var(signal.flatten()) / fs_Hz_post * fs_Hz_post
varinfo[3]['_name'] = 'horizontal variance'
#%var_h;
#varinfo(4).var = mean(var(signal,[0],2))/fs_Hz_post * fs_Hz_post;
varinfo[3]['_var'] = np.mean(np.var(signal,axis=2-1).flatten()) / fs_Hz_post * fs_Hz_post
#%can be very low if tau_sec is very big compared to siglen/fs_Hz
varinfo[4]['_name'] = 'analytical varinace (nyquist)'
#%var_a;
#varinfo(5).var = 2*tau_sec*atan(2*pi*fs_Hz_post*tau_sec)/(2*pi) * fs_Hz_post;
varinfo[4]['_var'] = 2.*tau_sec * np.arctan(2.*np.pi * fs_Hz_post * tau_sec) / (2.*np.pi) * fs_Hz_post
varinfo[5]['_name'] = 'ideal variance'
#%var_a_inf;
varinfo[5]['_var'] = tau_sec/2. * fs_Hz_post
varinfo[6]['_name'] = 'kernel norm'
varinfo[6]['_var'] = np.sum(kern) / tau_sec / fs_Hz_post
#%this is not a 'variance'. This should be 1.0.
#%slow
if False:
#autocorrel not converted into python
[x, c] = autocorrel(signal, fs_Hz_post)
i0 = nonzero((x >= 0.), 1., 'first') #find(,'first')
print "Warning: nonzero()"
#%plot(x*1000,c)
varinfo[7]['_name'] = 'autocorrel(0) var'
#varinfo(8).var=c(i0) * fs_Hz_post;
varinfo[7]['_var'] = np.dot(c[int(i0)-1], fs_Hz_post)
#%not very reliable.
#if VERBOSE:
# fprintf('var*fs=')
# fprintf(' %g, ', np.array(np.hstack((varinfo[:]['_var']))))
# fprintf('.\n')
return signal, psd_fft, fs_Hz_post, varinfo
#return signal, psd_fft, fs_Hz_post
#return signal #, psd_fft, fs_Hz_post, varinfo
raise Exception("Bad usage")
#% 21 = sineroot19 22 = sineroot50 23 = sineroot75
#% 24 = sineroot10 25 = sineroot110 26 = sineroot75tenth
#% 27 = sineroots20plus40 28 = sineroot75third
#% 29 = sineroot243 30 = sineroot150 31 = sineroot200
#% 32 = sine10.587352723 33 = sine10.387352723
#% 34 = rand7 35 = sine12 36 = 10+perturb 37 = sine11
#% 38 = sine10.17352723 39 = sine5 40 = sine6
#% 41 = sine7 42 = sine8 43 = sine9 44 = sine12
#% 45 = sine13 46 = sine14 47 = sine10.8342522
#% 48 = sine11.8342522 49 = sine12.8342522 50 = sine13.1900453
#% 51 = sine7.1900453 52 = sine7.8342522 53 = sine8.8342522
#% 54 = sine9.8342522 55 = sine5.19004 56 = sine5.8045
#% 57 = sine6.49004 58 = sine6.9004 59 = sine13.9004
#% 60 = 18+perturb
#%%% Initializations
plt.randn('state', randstate)
np.random.rand('twister', randstate)
#% Create raw weights
if newNets:
if Netsize<=20.:
Netconnectivity = 1.
else:
Netconnectivity = 10./Netsize
WstarRaw = generate_internal_weights(Netsize, Netconnectivity)
WinRaw = plt.randn(Netsize, 1.)
WbiasRaw = plt.randn(Netsize, 1.)
#% Scale raw weights and initialize weights
#% 21 = sineroot19 22 = sineroot50 23 = sineroot75
#% 24 = sineroot10 25 = sineroot110 26 = sineroot75tenth
#% 27 = sineroots20plus40 28 = sineroot75third
#% 29 = sineroot243 30 = sineroot150 31 = sineroot200
#% 32 = sine10.587352723 33 = sine10.387352723
#% 34 = rand7 35 = sine12 36 = 10+perturb 37 = sine11
#% 38 = sine10.17352723 39 = sine5 40 = sine6
#% 41 = sine7 42 = sine8 43 = sine9 44 = sine12
#% 45 = sine13 46 = sine14 47 = sine10.8342522
#% 48 = sine11.8342522 49 = sine12.8342522 50 = sine13.1900453
#% 51 = sine7.1900453 52 = sine7.8342522 53 = sine8.8342522
#% 54 = sine9.8342522 55 = sine5.19004 56 = sine5.8045
#% 57 = sine6.49004 58 = sine6.9004 59 = sine13.9004
#% 60 = 18+perturb
#%%% Initializations
plt.randn('state', randstate)
np.random.rand('twister', randstate)
#% Create raw weights
if newNets:
if Netsize<=20.:
Netconnectivity = 1.
else:
Netconnectivity = 10./Netsize
WstarRaw = generate_internal_weights(Netsize, Netconnectivity)
WinRaw = plt.randn(Netsize, 1.)
WbiasRaw = plt.randn(Netsize, 1.)
#% Scale raw weights and initialize weights
import scipy as sp import scipy.signal as sg import simpleSTC as sstc import compiSTAC as ci import matplotlib.pylab as plt nt = 20 # number of temporal elements of filter tvec = np.vstack(np.arange(-nt+1., 1)) # time vector filt1 = np.exp(-(((tvec+4.5)/1.5)**2)/2) - .2*np.exp((-((tvec+nt/2)/3)**2)/2) #1st filter filt1 = filt1/np.linalg.norm(filt1) #normalize filt2 = np.vstack((np.diff(filt1, 1, 0), 0)) # 2nd filter filt2 = filt2 - filt1*np.sum(filt1*filt2) # orthogonalize to 1st filter filt2 = (filt2)/np.linalg.norm(filt2) # normalize slen = 2000 # Stimulus length Stim = Stim = plt.randn(slen, 1.) RefreshRate = 100. # refresh rate linresp = (sg.convolve2d(np.concatenate((np.zeros((len(filt1)-1, Stim.shape[1])), Stim), 0), np.rot90(filt1, 2), 'valid')) # filter output r = np.maximum(linresp, 0.)*50 # instantaneous spike rate r = np.vstack(r) spikes = np.random.poisson(r/RefreshRate) # generate spikes [sta, stc, rawmu, rawcov] = sstc.simpleSTC(Stim, spikes, nt) #% Compute STA and STC u, s, v = np.linalg.svd(stc, 'full_matrices') # Compute eigenvectors of STC matrix s = np.diag(s) v = v.T ndims = 1 vecs, vals, mu1, mu0, v1, v2, _ = ci.compiSTAC(sta, stc, rawmu, rawcov, ndims) fig1 = plt.figure()
def x():
dithering = False
#% from test_lor3c2
#% 2) down sampling changes SNR
tau_s = 25./1.
std_s = 3.53
tau_n = 12./1.
std_n = 5.55
methid = 0
#%NTA=2.^[4:5];
#%NTA=2.^[4:8,9];
#NTA = np.power(2, np.array(np.hstack((np.arange(4, 7), 8, 10, 12))))
#NTA = np.power(2, np.array([4, 6, 8])) #12
NTA = np.power(2, np.array([4])) #12
nt_generate = np.max(NTA)
b_msec = 7. #3,5,1
fs_Hz = 1000.
siglen_msec = 10000.
#%kerlenratio=5;
siglen_msec = math.floor(siglen_msec / b_msec)* b_msec
#%uses fs_Hz, and then downsamples. The downsampling is not quite correct.
downsample_b = int(b_msec/1000. * fs_Hz + 0.00001)
#print downsample_b #7
assert downsample_b == 7
#%happens to be equal to b, if fs=1000
if False:
r2_raw = makelorresponse(tau_s, std_s, tau_n, std_n, nt_generate, siglen_msec, fs_Hz, [], downsample_b)
else:
#test only
r2_raw=np.random.randn(nt_generate, int((siglen_msec / b_msec))) #temporary
if False:
print r2_raw.shape #1428x256
print nt_generate
print nt_generate
print nt_generate
del nt_generate
siglen_b = (siglen_msec / b_msec)
del siglen_msec
#%M=4;
#%M=8;
#%M=4;
M = 5
#%M=8;
#%M=15;
#%M=3;
[resp_dig, dithinfo1] = discr(r2_raw, M)
#%not dithered
#assert is_any_int_type(r2_raw[0,0])
#r2_raw ois float
[resp_dith, dithinfo2] = dith_unsure(r2_raw, (dithinfo1['centres']))
#%not dithered
resp_dig = resp_dith
#del dithinfo
resp_dig = resp_dig-1
assert is_any_int_type(resp_dig[0,0])
resp_cont = r2_raw
sz=resp_cont.shape
#print sz #1428 * 256
resp_cont=resp_cont.flatten(1)
resp_cont = resp_cont-np.mean(resp_cont.flatten(1))
#%resp_cont=resp_cont/std(resp_cont(:))/2;
#%resp_cont=resp_cont/std(resp_cont(:))/2*1.5*4*4;
#resp_cont = matdiv(np.dot(matdiv(resp_cont, np.std(resp_cont.flatten(1)))/2.*1., M), M-1.)
#resp_cont=resp_cont/std(resp_cont(:))/2*1*M/(M-1);
resp_cont = resp_cont / np.std(resp_cont.flatten()) /2.* M / (M-1.)
#% [-1,+1]
resp_cont = (resp_cont+1.)/2.
#% [0,1]
resp_cont = resp_cont * (M-1.)
if 1:
resp_cont[(resp_cont<0.)] = 0
resp_cont[(resp_cont > M-1.)] = M-1
resp_cont = resp_cont.reshape(sz)
#print "HERE"
#exit(0)
#%clear r2_raw;
#% analytical formula
#%fs_Hz is used for Nyquist frequency
#%ami=analytical_lor(tau_s,std_s, tau_n, std_n, fs_Hz, 0.0001);
#%ami_perbin=mi/fs_Hz*b_msec;
#% %WHY?!
#%a=analytical_lor(tau_s/b_msec,std_s, tau_n/b_msec, std_n, fs_Hz/b_msec, 0.0001);
#%ami_perbin=a / (fs_Hz/b_msec);
#% (tau_s_msec, sigma_s, tau_n_msec, sigma_n, fs_Hz, d_freq)
#%Ia_bits_per_sec
#% Ia_bps --> ami_bps = analytical mi
ami_bps = analytical_lor(tau_s, std_s, tau_n, std_n, (1./b_msec/1000.), 0.0001)
#%ami_perbin=ami_bps* (b_msec/1000);
#% 1/ (fs_Hz/b_msec) = b_msec / fs = above (bcoz, fs=1000)
#% previous: 0.2362
#% new: 2.4512e-04
binlen_sec = b_msec/1000.
#%used later for normalization
#del a
del b_msec
#%clearvars -except resp_cont resp_dig M NTA binlen_sec siglen_b tau_s tau_n ami_bps ...
#% r2_raw std_* methid;
don_plot_this = False
#%size(respcut_dig)
if don_plot_this:
#%%
#%mean(mean(resp_dig,1))
[c, d] = plt.xcorr((matdiv(np.mean(resp_dig, 1.)-1.-(M-1.)/2.+1., M)*2.), 'unbiased')
plt.figure(10.)
plt.clf
#% / sqrt(std_s^2+std_n^2)
h = plt.plot((np.dot(d, binlen_sec)*1000.), matdiv(c, std_s**2.), 'k.-')
set(h, 'linewidth', 2.)
set(h, 'displayname', 'signal')
plt.xlim((np.array(np.hstack((-1., 1.)))*100.*1.))
#%set(gca,'xtick',-200:10:200);
plt.title('\\tau_s, \\tau_n = %g,%g [msec]'%( tau_s, tau_n))
#nn = matcompat.size(resp_dig, 1.)
nn = resp_dig.shape[1-1]
c1 = 0.
for tri in np.arange(1., (nn)+1):
#%mean(resp_dig(tri,:))
#MISSING CODE!!!
[c,d]=np.xcorr((resp_dig[tri,:]-1-(M-1)/2+1)/M*2,'unbiased');
c1=c1+c/nn;
pass
del nn
plt.hold(on)
h = plt.plot((np.dot(d, binlen_sec)*1000.), matdiv(c1, std_n**2.), 'r.-')
set(h, 'linewidth', 2.)
set(h, 'displayname', 'noise')
tt = np.dot(d, binlen_sec)
h = plt.plot((tt*1000.), np.dot(binlen_sec, np.exp(matdiv(-np.abs(tt), tau_s/1000.))), 'k--')
set(h, 'displayname', 'signal analytical')
h = plt.plot((tt*1000.), np.dot(binlen_sec, np.exp(matdiv(-np.abs(tt), tau_n/1000.))), 'r--')
set(h, 'displayname', 'noise analytical')
h = plt.legend('show')
set(h, 'box', 'off')
set(h, 'location', 'NorthWest')
plt.xlabel('Time [msec]')
plt.title('cross correlation')
#% my_save_png('test_lor4f1---signal-xcorr-v12-temp',{},[4,3]);
begintime = time.time()
#tic=time.time()
#%estims=cell(4,4);
#%LARR=[1,4,8,10];
#%LARR=[1,2:2:10];
#%LARR=[1,2:2:8];
#%LARR=[1,2,3,6];
#%LARR=[1,2,3,6,7];
#%LARR=[1]; %
#LARR = np.array(np.hstack((1., 3., 6., 7.)))
#LARR = np.array(np.hstack((1+1, 3, 6, 7)))
#LARR = [1+1, 3, 6, 7]
LARR = [1,1+1, 4]
MAX_L_DIRECT = np.Inf
#estims_cell=[[],[],[],[]]
#estims_cell=[[{}],[{}],[{}],[{}]]
#estims_cell=[[{}]]
estims_cell=[]
#len(NTA)
#print len(LARR),len(NTA), "******************"
for i in range(0,len(LARR)):
estims_cell.append([])
for j in range(0,len(NTA)):
print i,j
estims_cell[i].append({})
#%for nti=10:len(NTA)
for nti in range(1, len(NTA)+1):
nt = int(NTA[int(nti)-1])
for li in range(1, len(LARR)+1):
L = LARR[int(li)-1]
#%lenL=floor(siglen_msec/b_msec/L)*L;
#%lenL=floor(siglen_msec/L/b_msec)*L*b_msec;
lenL = (int((siglen_b/ L)) * L)
#%respcut=resp(:,1:lenL)';
#% respcut=resp(1:nt,1:lenL)';
if dithering:
respcut_cont = resp_cont[0:nt,0:lenL].conj().T
#print "HERE"
#exit(0)
#print nt, max(NTA) #16,256
#print resp_cont.shape #1428x256
#print resp_dig.shape
#print "000"
respcut_dig = resp_dig[0:nt,0:lenL].conj().T
#% len x trials
#%spk0 = zeros(1,LNum,size(signal,1), newlen );
#%spk=reshape(respcut, [1,L,size(resp)]);
#% spk__=reshape(respcut, 1,L,lenL/L,[]);
#%dithering = False
if dithering:
print "Using dithering"
#spk__cont = np.reshape(respcut_cont, 1., L, matdiv(lenL, L), np.array([]))
spk__cont = np.reshape(respcut_cont, [1, L, int(lenL/ L), -1])
#% 1 x L x len x trials
#spk2_cont = permute(spk__cont, np.array(np.hstack((1., 2., 4., 3.))))
spk2_cont = spk__cont.transpose([1-1, 2-1, 4-1, 3-1]) #, np.array(np.hstack((1., 2., 4., 3.))))
assert spk2_cont.shape == (1, L, nt, int(lenL/ L))
#clear(spk__c)
# #%slow
else:
print "Not using dithering"
#% 1 x L x trials x len
#print respcut_dig.shape, "*1" #256 x 16
#print (lenL,L,nt), "*2" #1428.0, 1.0, 16
spk__dig = np.reshape(respcut_dig, [1, L, int(lenL/ L), -1])
spk2_dig = spk__dig.transpose([1-1, 2-1, 4-1, 3-1]) #permute(spk__dig, np.array(np.hstack((1., 2., 4., 3.))))
assert spk2_dig.shape == (1, L, nt, int(lenL/ L))
assert is_any_int_type(spk2_dig[0,0,0,0])
del spk__dig
#%slow
assert type(nt) is int
#nts = np.dot(np.ones(1., matdiv(lenL, L)), nt)
#nts = np.ones([(lenL/ L)]) * nt
nts = np.array([nt]*(lenL/ L), dtype=int) #np.ones([(lenL/ L)]) * nt
#[nt]*int(lenL/ L)
#print nts
#assert type(nts[0]) is int
#print type(nts), type(nts[0])
print 'spk2: %dx%dx%dx%d ['%spk2_dig.shape
if L<=MAX_L_DIRECT:
ns = int(lenL/ L)
#nta = np.arange(1., (ns)+1)*0.+nt
nta = np.array([nt]*ns)
if dithering:
#%[prs3,ps3]=my_prs_dith1(spk2, nta);
#% [prs3_dith,ps3]=my_prs_dith1(spk2_c-1, nta);
#%[prs3_dith,ps3]=my_prs_dith1(spk2_cont-0, nta);
(prs_dith, ps_dith) = my_prs_dith1((spk2_cont-0.), nta)
#% [prs3_dig,ps3]=my_prs(spk1, nta);
#% sum(abs(prs3_dith(:)-prs3_dig(:)))
#% if 0
#% %[prs1,ps1]=my_prs(spk2, nta);
#% [prs1,ps1]=my_prs(spk2_dig, nta);
#% end
(prs_dig, ps_dig) = my_prs(spk2_dig, nta)
#print(repr((prs_dig, ps_dig)))
#%prs=prs3_dith;
#%ps=ps3;
fprintf('p')
hrs0_th = my_hrs(prs_dith, ps_dith, methid)
pr_dith = my_pr(prs_dith, ps_dith)
hr0_th = my_hr(pr_dith, methid)
#%hr1=hr(spk2_dig,nts,methid);
#%hrs1=hrs(spk2_dig,nts,methid);
hrs_dig = my_hrs(prs_dig, ps_dig, methid)
pr_dig = my_pr(prs_dig, ps_dig)
hr_dig = my_hr(pr_dig, methid)
#%[ my_hr(ps_dith, methid),my_hr(ps_dig, methid)]
#%m22= [...
#% my_hr(pr_dith, methid),my_hr(pr_dig, methid);
#% my_hrs(prs_dith,ps_dith, methid),my_hrs(prs_dig,ps_dig, methid)];
#%
vv1 = my_hr(pr_dith, methid)
my_hr(pr_dig, methid)
vv2 = my_hrs(prs_dith, ps_dith, methid)
my_hrs(prs_dig, ps_dig, methid)
m22 = vertcat(vv1, vv2)
#m22
#print li, nti
#%myminmax(spk2_dig(:)) % 1--4
#%myminmax(spk2_cont(:)) % 0--3
#estims.cell[int(li)-1,int(nti)-1]['hr_d'] = hr_dig
estims_cell[int(li)-1][int(nti)-1]['hr_d'] = hr_dig
#%hr1;
estims_cell[int(li)-1][int(nti)-1]['hrs_d'] = hrs_dig
#%hrs1;
estims_cell[int(li)-1][int(nti)-1]['hr_th'] = hr0_th
estims_cell[int(li)-1][int(nti)-1]['hrs_th'] = hrs0_th
#print type(nts), type(nts[0])
hr1_dig = hr(spk2_dig, nts, methid)
hrs1_dig = hrs(spk2_dig, nts, methid)
#print li, nti #1.0, 1.0
#print int(li)-1,int(nti)-1
#print estims_cell[int(li)-1][int(nti)-1]
zz=estims_cell[int(li)-1][int(nti)-1]
zz['hr_d'] = 1
#print hr1_dig
estims_cell[int(li)-1][int(nti)-1]['hr_d'] = hr1_dig
#%hr1;
estims_cell[int(li)-1][int(nti)-1]['hrs_d'] = hrs1_dig
#%hrs1;
if 1:
#print "***********"
#print nts
#%no dithering
estims_cell[int(li)-1][int(nti)-1]['hrs_sh'] = hrs_shuff(spk2_dig, nts, methid)
estims_cell[int(li)-1][int(nti)-1]['hrs_ind'] = hrsind(spk2_dig, nts, methid)
estims_cell[int(li)-1][int(nti)-1]['_xi'] = xi(spk2_dig, nts, methid)
#
else:
estims_cell[int(li)-1][int(nti)-1]['_hr'] = 0.
estims_cell[int(li)-1][int(nti)-1]['_hrs'] = 0.
estims_cell[int(li)-1][int(nti)-1]['hrs_sh'] = 0.
estims_cell[int(li)-1][int(nti)-1]['hrs_ind'] = 0.
estims_cell[int(li)-1][int(nti)-1]['_xi'] = 0.
#%we need: q-model in which , up to q0(=0) is shuffled: model=q, shuffle=0
#%shuffle across:R (not S)
#%if 1
#print "HERE2"
#exit(0)
q = 1
estims_cell[int(li)-1][int(nti)-1]['_hqrs'] = hqrs(spk2_dig, nts, q, methid)
estims_cell[int(li)-1][int(nti)-1]['_hqr'] = hqr(spk2_dig, nts, q, methid)
estims_cell[int(li)-1][int(nti)-1]['_xiq'] = xiq(spk2_dig, nts, q, methid)
#%spk_q=q_shuffle(spk,nts,q);
spk_q = q_shuffle(spk2_dig, nts, q)
#%estims{li,nti}['hrs_q']=hrs(spk_q,nts,methid);
estims_cell[int(li)-1][int(nti)-1]['hrs_q_sh'] = hrs(spk_q, nts, methid)
#%estims{li,nti}.hqrs0=hqrs(spk,nts,q,meth);
#%estims{li,nti}.hrss0=hrs_shuff(spk,nts,meth);
#%estims{li,nti}.spks=q_shuffle(spk,nts,q);
#%estims{li,nti}.hqrss0=hrs(spks,nts,meth);
#%estims{li,nti}.hr0=hr(spk,nts,meth);
#%estims{li,nti}.hqr0=hqr(spk,nts,q,meth);
#%estims{li,nti}.hrs0=hrs(spk,nts,meth);
#%estims{li,nti}.hrsi0=hrsind(spk,nmiu,meth);
#%estims{li,nti}.xiq0=xiq(spk,nmiu,q,meth);
#%estims{li,nti}.xi0=xi(spk,nmiu,meth);
#%end
estims_cell[int(li)-1][int(nti)-1]['L'] = L
estims_cell[int(li)-1][int(nti)-1]['len'] = lenL/ L
estims_cell[int(li)-1][int(nti)-1]['nt'] = nt
print(']'),
#print' (%g sec.)'%(np.floor(toc),)
print('\n')
#%estims{li,nti}
#Takes long up to here. Cleaned up.
#print "HERE"
#exit(0)
#%% -
#%a2d1_th=[];
#a2d1_d = [] #np.array([])
a2d1_d = [] #np.array([])
a2d2_qd = [] #np.array([])
a2d3_dsh = [] #np.array([])
nta1d = [] #np.array([])
for ntj in range(1, nti+1):
a2d1_d.append([])
assert len(a2d1_d)-1 == ntj-1 #assert index number
a2d3_dsh.append([])
assert len(a2d3_dsh)-1 == ntj-1 #assert index number
a2d2_qd.append([])
assert len(a2d2_qd)-1 == ntj-1 #assert index number
#ee=estims_cell[li-1][ntj-1]
#nta1d.append( ee['nt'] )
nta1d.append( estims_cell[0][ntj-1]['nt'] )
assert len(nta1d)-1 == ntj-1
for li in range(1, len(LARR)+1 ):
#%L=LARR(li);
#ee=estims{li,ntj};
print estims_cell #list of list of dict
#print estims_cell.shape
print estims_cell[0][0]
print li,ntj
ee=estims_cell[li-1][ntj-1]
#%if L<=MAX_L_DIRECT
if 'hrs_d' in ee: #haskey(ee, 'hrs_d'):
#% mi1=(ee['_hr']-ee['_hrs'] -ee['hrs_ind'] + ee['hrs_sh'] )/ee['L'];
#%mi1=(ee['hr_th']-ee['hrs_th'] )/ee['L'];
#%mi1=(ee['hr_d']-ee['hrs_d'] -ee['hrs_ind'] + ee['hrs_sh'] )/ee['L'];
#%mi2=(ee['hr_d']-ee['hrs_d'])/ee['L'];
assert not type(ee['hr_d']) is list
#mi1_plugin = matdiv(ee['hr_d']-ee['hrs_d'], ee['L'])
#mi1_sh = matdiv(ee['hr_d']-ee['hrs_d']-ee['hrs_ind']+ee['hrs_sh'], ee['L'])
mi1_plugin = (ee['hr_d']-ee['hrs_d']) / ee['L']
mi1_sh = (ee['hr_d']-ee['hrs_d']-ee['hrs_ind']+ee['hrs_sh']) / ee['L']
else:
mi1_plugin = 0.
#%NaN;
mi1_sh = 0.
print mi1_plugin
#%a2d1_th(ntj,li)=mi1;
#a2d1_d[int(ntj)-1,int(li)-1] = mi1_plugin
a2d1_d[ntj-1].append(mi1_plugin)
assert len(a2d1_d[ntj-1])==li-1+1
#a2d3_dsh[int(ntj)-1,int(li)-1] = mi1_sh
a2d3_dsh[ntj-1].append( mi1_sh )
assert len(a2d3_dsh[ntj-1])==li-1+1
#%mi2=(ee['_xi']-ee['hrs_ind'])/ee['L'];
#%mi2=(ee['_hqr']-ee['_hrs'] -ee['_hqrs'] + ee['hrs_q'] )/ee['L'];
#%mi2=(ee['_xiq']-ee['hrs_q'] +ee['hrs_sh'] - ee['hrs_ind'] )/ee['L']; %DID NOT
#%WORK
#%mi2=(ee['_hqr']-ee['hrs_q'])/ee['L']; %+ee['hrs_sh'] - ee['hrs_ind'] )/ee['L'];
#%slightly biased (uses hrs_q-sh)
#% ************ CHECK THIS *************
#mi2 = matdiv(ee['_xiq']-ee['_hqrs'], ee['L'])
mi2 = (ee['_xiq']-ee['_hqrs']) / ee['L']
#%mi2=(ee['_hqr']-ee['_hqrs'])/ee['L'];
#% ... %+ee['hrs_sh'] - ee['hrs_ind'] )/ee['L'];
#%mi2=(ee['_xi']-ee['hrs_ind'])/ee['L'];
#%mi2=(ee.hr1-ee.hrs1)/ee['L'];
#%mi2=(ee['hr_d']-ee['hrs_d'])/ee['L'];
#a2d2_qd[int(ntj)-1,int(li)-1] = mi2
a2d2_qd[ntj-1].append( mi2 )
assert len(a2d2_qd[ntj-1]) -1 == li-1
#%mi3=(ee['_hqr']-ee['hrs_q'])/ee['L']; %+ee['hrs_sh'] - ee['hrs_ind'] )/ee['L'];
#%mi3=(ee['_xiq']-ee['hrs_q'])/ee['L'];
#nta1d[int(ntj)-1] = ee['nt']
#nta1d.append( ee['nt'] )
#print len(nta1d),ntj
#print nta1d
#assert len(nta1d)-1 == ntj-1
#assert len(nta1d)-1 == ntj-1 ##COMPILE_TIME:CHECK_PATTERN: MATCH LAST_INDEX(nta1d) == ntj-1 #PLANGNOTE
assert nta1d[ntj-1] == ee['nt']
#% end
#%end
if False:
plt.figure(5.)
plt.clf
ax = np.array([])
#%ax(1)=subplot(1,3,1:2);
ax[0] = plt.subplot(2., 3., 1.)
plt.hold(on)
#%box on;
lha = np.array([])
#%h = plot(nta1d,a2d1_th/binlen_sec);
h = plt.plot(nta1d, matdiv(a2d1_d, binlen_sec))
#%if isempty(h)
#% h=plot(0,0,'w.');
#%end
set(h, 'linewidth', 2.)
set(h, 'Displayname', 'L-direct')
#%L-bin
#%set(h,'Displayname','dithered'); %L-bin
#%lha(1)=h(1);
plt.ylabel('Information rate [bits/sec]')
#% set(gca,'xscale','log');
plt.title('direct plug-in')
#%MARKOV
ax[2] = plt.subplot(2., 3., 3.)
h = plt.plot(nta1d, matdiv(a2d2_qd, binlen_sec), '-')
#%if isempty(h)
#% h=plot(0,0,'w.');
#%end
#%plot(nta1d,a2d3,':');
set(h, 'Displayname', 'q-Markov')
#%L-bin
#%set(h,'Displayname','L-direct');
set(h, 'linewidth', 2.)
#%lha(2)=h(1);
#% q=NaN;
#%title('q=1');
#%plot((ee['nt']),mi,'.');
#%text((ee['nt']),mi, sprintf(' L=%d',ee['L']));
#% set(gca,'xscale','log');
#%end
#% end
#%hold on;
#%plot(nta1d, ami_perbin + nta1d*0, 'k:');
#%nta1d+100
#% nta1d_temp=myminmax(nta1d); nta1d_temp(end)=nta1d(end)+100; nta1d_temp(1)=90;
#% h=plot(nta1d_temp, ami_bps + nta1d_temp*0, 'k-.');
#% set(h,'Displayname','analytical');
#%lha(3)=h;
plt.hold(on)
#% plot(nta1d, nta1d*0, 'k:');
#% xlabel('Trials');
#%ylabel('Information [bits/bin]');
#%xlim([10,(max(NTA)+100)*1.1]);
#%xlim([min(NTA)-2,(max(NTA)+100)*1.1]);
plt.title('q-Markov')
lta=[]
for li in np.arange(1., (len(LARR))+1):
#% text(nta1d(1),a2d1_d(1,li)/binlen_sec, sprintf(' L=%d',LARR(li)));
lta[li]=' L=%d'%(LARR(li),);
pass
if False:
lh = plt.legend(lta)
set(lh, 'box', 'off')
set(lh, 'Location', 'SouthWest')
set(lh, 'FontSize', 7.)
#% PANEL 2
#% h=legend(lha,'location','SouthEast'); set(h,'box','off');
ax[1] = plt.subplot(2., 3., 2.)
h = plt.plot(nta1d, matdiv(a2d3_dsh, binlen_sec), '-')
#%if isempty(h)
#% h=plot(0,0,'w.');
#%end
set(h, 'Displayname', 'direct-sh')
#%L-bin
lha[2] = h[0]
#% set(gca,'xscale','log');
set(h, 'linewidth', 2.)
plt.title('direct-sh')
for pani in np.arange(1., 4.0):
set(plt.gcf, 'CurrentAxes', ax[int(pani)-1])
plt.hold(on)
nta1d_temp = myminmax(nta1d)
nta1d_temp[int(0)-1] = nta1d[int(0)-1]+100.
nta1d_temp[0] = 20.
#%90;
#%h=plot(ax(pani),
h = plt.plot(nta1d_temp, (ami_bps+nta1d_temp*0.), 'k--')
set(h, 'Displayname', 'analytical')
set(plt.gca, 'xscale', 'log')
plt.plot(nta1d, (nta1d*0.), 'k:')
plt.xlabel('Trials')
set(plt.gca, 'xtick', np.unique(np.array(np.hstack(((2 ** np.array(np.hstack((5., 7., 9., np.log2(matcompat.max(NTA)))))))))))
plt.ylim(np.array(np.hstack((-50., 100.))))
plt.box(off)
linkaxes(ax, 'y')
linkaxes(ax, 'x')
nta1d_temp = myminmax(nta1d)
nta1d_temp[int(0)-1] = nta1d[int(0)-1]+1000.
nta1d_temp[0] = nta1d_temp[0]-4.
plt.xlim(nta1d_temp)
#%a=[a2d3_dsh(:)/binlen_sec ; a2d1_d(:)/binlen_sec ; a2d2_qd(:)/binlen_sec ];
a = vertcat(matdiv(a2d3_dsh.flatten(1), binlen_sec), matdiv(a2d1_d.flatten(1), binlen_sec), matdiv(a2d2_qd.flatten(1), binlen_sec))
#%ylim(myminmax(a)*1.5);
#%ax(4)=
plt.subplot(2., 3., 4.)
plt.hold(on)
WARR = np.dot(LARR, binlen_sec)*1000.
#%bar(LARR,a2d2_qd(end,:) /binlen_sec);
plt.plot(WARR, matdiv(a2d2_qd[int(0)-1,:], binlen_sec), 'ko-', 'displayname', 'q-Markov')
plt.plot(WARR, matdiv(a2d1_d[int(0)-1,:], binlen_sec), 'r--', 'displayname', 'direct-sh')
LA2 = np.array(np.hstack((WARR, WARR[int(0)-1]+1.)))
h = plt.plot(LA2, (ami_bps+LA2*0.), 'k--')
set(h, 'Displayname', 'analytical')
#%xlabel('L');
plt.xlabel('W [msec]')
lh = plt.legend('show')
set(lh, 'box', 'off')
set(lh, 'Location', 'NorthEast')
#%set(lh,'FontSize',7);
#%linkaxes(ax, 'y')
#%ylabel('Information rate [bits/sec]');
plt.xlim(np.array(np.hstack((0.1, matcompat.max(LA2)+1.))))
plt.ylabel('Information rate [bits/sec]')
title_on_top2(sprintf('q=%d, DITHER, QE=%d, W=%g[ms] \\tau_s,\\tau_n=%g,%g [ms]', q, methid, (1000.*binlen_sec), tau_s, tau_n), 0.)
#%darbareye hichi be ghatiyat nemirese. va in kheili Pernicious, va
#%PErvesaive, va daaem va hart dafe hastesh. bayad MM javab bekhad ta
#%begam.
#%save test_lor4???_all
#% my_save_png('test_lor4f1---dither-v2',{},[7,5]);
time.sleep(0.2)
print("sleep")
finishtime = time.time() #now()
#toc=time.time()
print('.')
print estims_cell
maxc = 0
collect_keys={}
for i in range(0,len(estims_cell)):
for j in range(0,len(estims_cell[i])):
for k in estims_cell[i][j]:
collect_keys[k]=0
if maxc < j+1:
maxc = j+1
print collect_keys.keys()
print
ka={}
for k in collect_keys:
ka[k]=np.zeros((len(estims_cell),maxc))
for i in range(0,len(estims_cell)):
for j in range(0,len(estims_cell[i])):
for k in collect_keys:
ka[k][i,j]=estims_cell[i][j][k]
for k in collect_keys:
print k+":",
print ka[k].T
return
dont_plot_this = False
#%% - plots
if dont_plot_this:
DOUBLEPANEL = 0.
plt.figure(6.)
plt.clf
if DOUBLEPANEL:
plt.subplot(1., 2., 1.)
#plt.hold(on)
#%box on;
styc = 'rgbmkckkk'
for li in np.arange(1., (len(LARR))+1):
lnt = np.array([])
mi = np.array([])
for ntj in np.arange(1., (nti)+1):
ee = estims_cell[int(li)-1,int(ntj)-1]
#%mi(ntj)=(ee['_hr']-ee['_hrs'])/ee['L'];
#%mi(ntj)=(ee['_hr']-ee['_hrs'] -ee['hrs_ind'] + ee['hrs_sh'] )/ee['L'];
#%mi(ntj)=(ee.hr1-ee.hrs1 -ee['hrs_ind'] + ee['hrs_sh'] )/ee['L'];
mi[int(ntj)-1] = matdiv(ee['hr_d']-ee['hrs_d']-ee['hrs_ind']+ee['hrs_sh'], ee['L'])
#%lnt(ntj)=log2(ee['nt']);
lnt[int(ntj)-1] = matdiv(1., ee['nt'])
plt.plot(lnt[int(ntj)-1], mi[int(ntj)-1], np.array(np.hstack((styc[int(li)-1], 'o'))))
plt.text(lnt[int(ntj)-1], mi[int(ntj)-1], sprintf(' L=%d', (ee['L'])))
h = plt.plot(lnt, mi, np.array(np.hstack((styc[int(li)-1], '--'))))
set(h, 'LineWidth', 2.)
h1[int(li)-1] = h
#%set(gca,'xlim',[4,1+log2(max(NTA))]);
ami_perbin = np.dot(ami_bps, binlen_sec)
plt.plot(lnt, (ami_perbin+lnt*0.), 'k--')
plt.xlabel('log_2(trials)')
plt.ylabel('information (bits)')
ylim = plt.get(plt.gca, 'ylim')
#%set(gca,'ylim',[0,ylim(2)]);
#%set(gca,'ylim',[0,0.5]);
plt.title('direct method')
#% legend(h1, cell_sprintf('L=%d',LARR));
#%%
#%prs_dig(1,:)=[];
#%%
plt.figure(4.)
plt.clf
plt.plot(resp_cont[0,:])
#plt.hold(on)
plt.plot((resp_dig[0,:]-0.), 'r')
plt.figure(10.)
plt.clf
mypcolor(prs_dig[0:,199:220.])
plt.title('trunc')
plt.figure(11.)
plt.clf
mypcolor(prs_dith[:,199:220.])
plt.title('dith')
plt.figure(12.)
plt.clf
plt.hist(np.array(np.hstack((prs_dith.flatten(1), prs_dig.flatten(1)))))
#%%
plt.figure(13.)
plt.clf
a = resp_cont[0,:]
b = resp_dig[0,:]-0.
c = r2_raw[0,:]
plt.plot(a, (b+np.dot(plt.randn(matcompat.size(b)), 0.1)), 'k.')
mm = myminmax((c.flatten(1)+np.dot(plt.randn(matcompat.size(a.flatten(1))), 0.01)))
cx = np.arange(mm[0], (mm[1])+(np.diff(mm)/40.), np.diff(mm)/40.)
h1 = histc(c.flatten(1), cx)
h1 = matdiv(h1, np.sum(h1))
#% *mean(diff(cx))
plt.figure(14.)
plt.clf
plt.subplot(1., 2., 1.)
plt.plot(c, (a+np.dot(plt.randn(matcompat.size(a)), 0.05)), 'k.', 'markersize', 1.)
plt.hold(on)
plt.plot(cx, (h1*20.+0.5), 'r')
plt.subplot(1., 2., 2.)
plt.plot(c, (b+np.dot(plt.randn(matcompat.size(a)), 0.05)), 'k.', 'markersize', 1.)
plt.hold(on)
plt.plot(cx, (h1*20.+0.5), 'r')
for i in np.arange(1., 3.0):
plt.subplot(1., 2., i)
for x0 in np.array(np.hstack((-4., 4.))):
plt.plot((x0+np.array(np.hstack((0., 0.)))), np.array(np.hstack((0., M))), 'b--', 'linewidth', 1.)
#% my_save_png('test_lor4e2-v13-meth=1',{},[5,4]);
#%%
#%close all
plt.figure(101.)
plt.clf
plt.plot(pr_dig, 'displayname', 'discrete')
plt.hold(on)
plt.plot(pr_dith, 'r.-', 'displayname', 'dith')
np.array(np.hstack((np.sum(pr_dith), np.sum(pr_dig))))
plt.legend(show)
return estims_cell
#!/usr/bin/python
# -*- coding: utf-8 -*-
from scipy.signal.ltisys import lti, lsim
from matplotlib.pylab import save, randn
from Numeric import sqrt, array, arange
n = 128
Q = 1.
R = 1.
w = 0.3 * sqrt(Q) * randn(n)
v = 0.2 * sqrt(R) * randn(n)
ureq = array([[-1.743] * n])
t = arange(0, 0.9999, 1. / 128)
#Generator().generateSin(n, 3, 33) #-0.37727
u = ureq + w
#A, B, C, D = [[-6.,-25.], [1.,0.]], [[1.],[0.]], [[0., 1.]], [[0.]]
#sys=lti(A, B, C, D)
#y = lsim(sys, u, t)
yv = u + v
##save('Q.txt', Q)
##save('R.txt', R)
save('w.txt', w)
save('v.txt', v)
save('yv.txt', yv)
save('u.txt', u)
save('ureq.txt', ureq)
Spart3 = Spart3.reshape(int(nt), 200)
Spart3 = np.transpose(Spart3)
S = Spart1 - Spart2 * Spart3
# In[3]:
#%%Further definitions
M = B + cg_tau
aw = a0 - a2 * x**2
kLf = k * Lf
#%%noise timeseries
sig_noise = sig / np.sqrt(dt)
print 'sig_noise'
print sig_noise
noise = sig_noise * plt.randn(1, int(dur * nt))
lp = 1. / 52. #%1 week 'decorrelation' time
alpha = np.exp(-dt / lp) # this alpha differs from the one below
nalpha = np.sqrt(1. - alpha**2)
N_red = noise * 0.
N_red[0] = noise[0]
for i in np.arange(1, (len(noise)) - 1):
N_red[i] = alpha * N_red[i - 1] + nalpha * noise[i]
print 'N_red'
print N_red[0:10]
#%%Set up output arrays, saving 100 timesteps/year
E100 = np.zeros((int(n), int(dur * 100.)))
T100 = np.zeros((int(n), int(dur * 100.)))
# In[4]:
#% 16 = rand3 17 = rand9 18 = rand10 19 = 0.8 20 = sineroot27
#% 21 = sineroot19 22 = sineroot50 23 = sineroot75
#% 24 = sineroot10 25 = sineroot110 26 = sineroot75tenth
#% 27 = sineroots20plus40 28 = sineroot75third
#% 29 = sineroot243 30 = sineroot150 31 = sineroot200
#% 32 = sine10pt587352723 33 = sine10pt10.387352723
#% 34 = rand7 35 = sine12 36 = rand5 37 = sine11
#% 38 = sine10pt17352723 39 = sine5 40 = sine6
#% 41 = sine7 42 = sine8 43 = sine9 44 = sine12
#% 45 = sine13 46 = sine14 47 = sine10.8342522
#% 48 = sine11.8522311 49 = sine12.5223223 50 = sine13.1900453
#% 51 = sine7.1900453 52 = sine7.9004531 53 = sine8.4900453
#% 54 = sine9.1900453 55 = sine5.19004 56 = sine5.8045
#% 57 = sine6.49004 58 = sine6.9004 59 = sine13.9004
#%%% Initializations
plt.randn("state", randstate)
np.random.rand("twister", randstate)
I = np.eye(Netsize)
Np = length(patts)
#% Create raw weights
if newNets:
if Netsize <= 20.0:
Netconnectivity = 1.0
else:
Netconnectivity = 10.0 / Netsize
WRaw = generate_internal_weights(Netsize, Netconnectivity)
WinRaw = plt.randn(Netsize, 1.0)
WbiasRaw = plt.randn(Netsize, 1.0)
arm = P.arange(m).reshape(-1, 1)
arsy_i = P.arange(seq_length + samps).reshape(1, -1)
arsy_o = P.arange(samps).reshape(1, -1)
arsx = P.arange(2 * seq_length + 1 + samps).reshape(1, -1)
PERM = P.permutation(C * m) * stride + offset
for c in range(C):
# if ep==0 and c<C//2:
# continue
print("On chunk {0}/{1}".format(c + 1, C))
# I = c*m*stride + offset
x_c = P.vstack([
x[PERM[c * m + fn]:(PERM[c * m + fn] +
(2 * seq_length + 1 + samps))]
for fn in range(m)
])
x_c = x_c + P.randn(*x_c.shape) * vx * iSNR # add light noise
x_c[x_c > XMAX] = XMAX
x_c[x_c < -XMAX] = -XMAX
x_inds = mu_law(x_c, mu, XMAX)
x_c = P.zeros((m, 2 * seq_length + 1 + samps, mu))
x_c[arm, arsx, x_inds] = True
y_c_i = P.vstack([
y[PERM[c * m + fn]:(PERM[c * m + fn] + seq_length + samps)]
for fn in range(m)
])
y_c_i = y_c_i + P.randn(*y_c_i.shape) * vy * iSNR # add light noise
y_c_i[y_c_i > YMAX] = YMAX
y_c_i[y_c_i < -YMAX] = -YMAX
y_inds = mu_law(y_c_i, mu, YMAX)
y_c_i = P.zeros((m, seq_length + samps, mu))
y_c_i[arm, arsy_i, y_inds] = True