def init():
GPIO.setwarnings(False)
GPIO.cleanup()
GPIO.setmode(GPIO.BCM)
GPIO.setup(SPIMOSI, GPIO.OUT)
GPIO.setup(SPIMISO, GPIO.IN)
GPIO.setup(SPICLK, GPIO.OUT)
GPIO.setup(SPICS, GPIO.OUT)
global adc
adc = MCP3208()
def __init__(self):
self.light = False
self.adc = MCP3208()
self.sensor2 = BMP085.BMP085(mode=BMP085.BMP085_ULTRAHIGHRES)
signal(SIGTERM, self.__cleanup)
GPIO.setmode(GPIO.BCM)
GPIO.setup(self.CHANNEL1, GPIO.OUT)
GPIO.output(self.CHANNEL1, GPIO.HIGH)
GPIO.setup(self.CHANNEL2, GPIO.OUT)
GPIO.output(self.CHANNEL2, GPIO.HIGH)
def heartRate():
pin = 2
# GPIOピン番号の定義方法を設定する（BCM/BOARD）
GPIO.setmode(GPIO.BCM)
# 18番ピンを出力モードで初期化する
GPIO.setup(pin, GPIO.OUT)
adc = MCP3208()
threshold = 2 #V
x = np.arange(0, 60, 1)
y = np.zeros(x.shape[0])
heart_rate_duration = np.zeros(10)
y[x.shape[0] - 1]
start = time.time()
GPIO.output(pin, False)
while True:
data = adc.read(0) * 5 / 4095.0
if data >= threshold:
if y[x.shape[0] - 2] < y[x.shape[0] - 1] and y[x.shape[0] -
1] > data:
duration = time.time() - start
if duration >= 60 / 150.0:
heart_rate_duration = np.roll(heart_rate_duration, -1)
heart_rate_duration[heart_rate_duration.shape[0] -
1] = duration
heart_rate = round(60 / np.mean(heart_rate_duration), 1)
sd = round(np.std(heart_rate_duration), 4) #標準偏差
if np.count_nonzero(heart_rate_duration
) == heart_rate_duration.shape[0]:
print("{}bpm : standard deviation {}".format(
heart_rate, sd))
if sd < 0.04:
break
start = time.time()
y = np.roll(y, -1)
y[x.shape[0] - 1] = data
time.sleep(0.001)
GPIO.output(pin, True)
# GPIOを解放
GPIO.cleanup()
return heart_rate
if cfg['debug'] == True:
print '[debug] Uploading ' + filepath + ' to s3'
# Upload to S3
conn = tinys3.Connection(cfg['s3']['access_key_id'],
cfg['s3']['secret_access_key'])
f = open(filepath, 'rb')
conn.upload(filepath,
f,
cfg['s3']['bucket_name'],
headers={'x-amz-meta-cache-control': 'max-age=60'})
if os.path.exists(filepath):
os.remove(filepath)
adc = MCP3208()
moisture = adc.read(0)
rain = adc.read(1)
light = adc.read(2)
print("moisture", moisture)
print("rain", rain)
print("light", light)
humidity, temp = Adafruit_DHT.read_retry(11, 4)
print("temp", temp)
print("humidity", humidity)
myMQTTClient = AWSIoTMQTTClient("new_Client")
myMQTTClient.configureEndpoint("a3so5jr4thekwx.iot.us-east-1.amazonaws.com",
8883)
def __init__(self):
self.client = MCP3208()
self.threadStart = Thread(target=self.__start)
self.threadStart.setDaemon(True)
self.threadStart.start()
def getSensor():
adc = MCP3208()
cds = adc.read(0) * 5 / 4095.0
uv = adc.read(1) * 5 / 4095.0
return cds, uv
class MQ():
adc = MCP3208()
RL_VALUE = 5
RO_CLEAN_AIR_FACTOR = 9.83
CALIBARAION_SAMPLE_TIMES = 50
CALIBRATION_SAMPLE_INTERVAL = 500
READ_SAMPLE_INTERVAL = 50
READ_SAMPLE_TIMES = 5
GAS_LPG = 0
GAS_CO = 1
GAS_SMOKE = 2
def __init__(self, Ro=3.46, analogPin=0):
self.Ro = Ro
self.MQ_PIN = analogPin
self.LPGCurve = [2.3, 0.21, -0.47]
self.COCurve = [2.3, 0.72, -0.34]
self.SmokeCurve = [2.3, 0.53, -0.44]
print("Calibrating...")
self.Ro = self.MQCalibration(self.MQ_PIN)
print("Calibration is done...\n")
print("Ro=%f kohm" % self.Ro)
def MQPercentage(self):
val = {}
read = self.MQRead(self.MQ_PIN)
val["GAS_LPG"] = self.MQGetGasPercentage(read / self.Ro, self.GAS_LPG)
val["CO"] = self.MQGetGasPercentage(read / self.Ro, self.GAS_CO)
val["SMOKE"] = self.MQGetGasPercentage(read / self.Ro, self.GAS_SMOKE)
return val
def MQResistanceCalculation(self, raw_adc):
return float(self.RL_VALUE * (4095.0 - raw_adc) / float(raw_adc))
def MQCalibration(self, mq_pin):
val = 0.0
for i in range(self.CALIBARAION_SAMPLE_TIMES):
val += self.MQResistanceCalculation(self.adc.read(mq_pin))
time.sleep(self.CALIBRATION_SAMPLE_INTERVAL / 1000.0)
val = val / self.CALIBARAION_SAMPLE_TIMES
val = val / self.RO_CLEAN_AIR_FACTOR
return val
def MQRead(self, mq_pin):
rs = 0.0
for i in range(self.READ_SAMPLE_TIMES):
rs += self.MQResistanceCalculation(self.adc.read(mq_pin))
time.sleep(self.READ_SAMPLE_INTERVAL / 1000.0)
rs = rs / self.READ_SAMPLE_TIMES
return rs
def MQGetGasPercentage(self, rs_ro_ratio, gas_id):
if (gas_id == self.GAS_LPG):
return self.MQGetPercentage(rs_ro_ratio, self.LPGCurve)
elif (gas_id == self.GAS_CO):
return self.MQGetPercentage(rs_ro_ratio, self.COCurve)
elif (gas_id == self.GAS_SMOKE):
return self.MQGetPercentage(rs_ro_ratio, self.SmokeCurve)
return 0
def MQGetPercentage(self, rs_ro_ratio, pcurve):
return (math.pow(
10,
(((math.log(rs_ro_ratio) - pcurve[1]) / pcurve[2]) + pcurve[0])))
status = 0
# prepare handlers for process exit
signal.signal(signal.SIGTERM, end_process)
signal.signal(signal.SIGINT, end_process)
# initialize ADC
if (ADC == "MCP3551"):
adc = MCP3551(SPIMISO, SPIMOSI, SPICLK, SPICS)
elif (ADC == "MCP3001"):
adc = MCP3001(SPIMISO, SPIMOSI, SPICLK, SPICS)
elif (ADC == "MCP3008"):
adc = MCP3008(SPIMISO, SPIMOSI, SPICLK, SPICS, ADCCHANNEL)
elif (ADC == "MCP3208"):
adc = MCP3208(SPIMISO, SPIMOSI, SPICLK, SPICS, ADCCHANNEL)
elif (ADC == "NOADC"):
adc = NOADC(SPIMISO, SPIMOSI, SPICLK, SPICS, ADCCHANNEL)
else:
print("Unknown ADC type " + str(ADC) +
"! Please set ADC in config.py to one of the supported types.")
exit(0)
adc.setup_pins()
SVOLT100 = VOLT100 * HIGHRESVAL / (LOWRESVAL + HIGHRESVAL)
SVOLT75 = VOLT75 * HIGHRESVAL / (LOWRESVAL + HIGHRESVAL)
SVOLT50 = VOLT50 * HIGHRESVAL / (LOWRESVAL + HIGHRESVAL)
SVOLT25 = VOLT25 * HIGHRESVAL / (LOWRESVAL + HIGHRESVAL)
SVOLT0 = VOLT0 * HIGHRESVAL / (LOWRESVAL + HIGHRESVAL)
tzinfo=pytz.timezone('Europe/Vienna')).isoformat()
print("Started measurement: {} on host {}".format(filename, host))
# initialize the GPIOs (General Purpose Input and Output)
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
# set the pins as output or input
GPIO.setup(CLK, GPIO.OUT)
GPIO.setup(MOSI, GPIO.OUT)
GPIO.setup(MISO, GPIO.IN)
GPIO.setup(CS, GPIO.OUT)
# Init mcp3208 instance
mcp3208 = MCP3208(clockpin=CLK, mosipin=MOSI, misopin=MISO, cspin=CS)
hardware_status = check_hardware()
print(hardware_status)
c = 0 # Start with zero, because the first msgs should contain all data
while True:
starttime = time.time()
msgs = list()
# The function measure_voltage will be executed (called) with the argument
# "channels" which was defined on at the top of the code.
currents = [measure_current(channel) for channel in channels]
# Send everything after SEND_IDLE time
if (c % (SEND_IDLE / SEND_ACTIVE)) == 0:
c = 1
def __init__(self):
print(self.read_logo())
self.adc = MCP3208()
GPIO.setmode(GPIO.BCM) # choose BCM or BOARD
GPIO.setup(self.PUMP_PIN, GPIO.OUT)
def sender(buff, n):
class NumpyEncoder(json.JSONEncoder):
def default(self, obj):
if isinstance(obj, np.ndarray):
return obj.tolist()
return json.JSONEncoder.default(self, obj)
adc = MCP3208()
g_data = " "
g_cnt = 0
g_dtime = 0
g_sr = 0
g_dt = 0
g_disk = os.statvfs("/")
g_first_avail = g_disk.f_bsize * g_disk.f_bavail
time_now = dt.datetime.now()
fname = "data"+str(time_now)+".csv"
f=open(fname, "w")
mydt = 0
pdt = 0
sr = 0
cnt = 0
data = ''
start_time = time.time()
while True:
try:
dtime = time.time()-start_time
mydt = long(dtime*1000)/10 # 100 seconds
cdt = int(mydt%100) # 1 second
#print "cdt: ", cdt, ", pdt: ", pdt
buff = list()
if cdt!=pdt: # before receiving a 100th input / if cdt == 6 # cdt ==
read = adc.read(6)
cnt = cnt + 1
sr = cnt/dtime
data = data + str(read) + " "
pdt = cdt # pdt will be 6
buff.append(map(int, data.split()))
if(cnt%100==0):
#print("successfully")
# print "cnt", cnt
cdt += 1
del buff[:]
if cdt==0:
f.write(data)
data = ""
# print "sr", sr, "dt", str(dt.datetime.now())
avail = g_disk.f_bsize * g_disk.f_bavail
if avail < (g_first_avail * 3 / 5) :
raise KeyboardInterrupt
except KeyboardInterrupt:
break
f.close()
def __init__(self):
self.adc = MCP3208()
self.ir = {}
for key in ['front', 'right', 'back', 'left']:
self.ir[key] = 0