def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
device_id = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
api_key = data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
if not "value" in params:
verbose(2, "ERROR (", fn_name, ") - no value parameter")
return False
value = params["value"]
mem_device = mea.getMemory(device_id)
mem_interface = mea.getMemory("interface" + str(interface_id))
pdata = mea_utils.parseKeyValueDatasToDictionary(
str(data['data']).strip().lower(), ";", "=")
if value in pdata:
v = pdata[value]
f = 0.0
if type(v) == str:
try:
f = float(v)
except:
return False
mem_device["current"] = f
mea.addDataToSensorsValuesTable(device_id, f, 0, 0, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", str(f))
mea.xplSendMsg(xplMsg)
# mea.interfaceAPI(api_key, "mea_writeData", "{{{OK}}}")
else:
return -1
def mea_dataFromSensor(data):
fn_name= __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
device_id=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name=data["device_name"]
interface_id=data["interface_id"]
parameters=data["device_parameters"]
parameters=parameters.strip().lower()
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype=data["typeoftype"]
api_key=data["api_key"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
if not "value" in params:
verbose(2, "ERROR (", fn_name, ") - no value parameter")
return False
value = params["value"]
mem_device=mea.getMemory(device_id)
mem_interface=mea.getMemory("interface"+str(interface_id))
pdata = mea_utils.parseKeyValueDatasToDictionary(str(data['data']).strip().lower(),";","=")
if value in pdata:
v = pdata[value]
f = 0.0
if type(v) == str:
try:
f=float(v)
except:
return False
mem_device["current"]=f
mea.addDataToSensorsValuesTable(device_id, f, 0,0,"")
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", str(f))
mea.xplSendMsg(xplMsg)
# mea.interfaceAPI(api_key, "mea_writeData", "{{{OK}}}")
else:
return -1
def mea_dataFromSensor(data):
fn_name = sys._getframe().f_code.co_name
xplMsg = {}
try:
id_sensor = data["device_id"]
cmd_data = data["cmd_data"]
l_cmd_data = data["l_cmd_data"]
data_type = data["data_type"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem = mea.getMemory(id_sensor)
if data_type == 0x92:
mem["iodata"] = parseIOData(cmd_data, l_cmd_data)
paramsDict = mea_utils.parseKeyValueDatasToDictionary(
data["device_parameters"], ",", ":")
if "pin" in paramsDict:
pin = paramsDict["pin"]
else:
return False
if "sensor_type" in paramsDict:
type = paramsDict["sensor_type"]
else:
type = "generic"
current_key = pin + "_current"
last_key = pin + "_last"
if pin in mem["iodata"].lower():
val = mem["iodata"][pin]
last_val = 0
try:
mem[last_key] = mem[current_key]
except:
mem[last_key] = 0
strVal = ""
if pin[0] == "d":
if val == 1:
mem[current_key] = "high"
else:
mem[current_key] = "low"
logval = val
else:
if "compute" in paramsDict:
x = val
y = eval(paramsDict["compute"])
logval = round(y, 2)
else:
logval = val
mem[current_key] = logval
if mem[current_key] != mem[last_key]:
if "log" in paramsDict and paramsDict["log"].lower() == "yes":
if "unit" in paramsDict:
unit = int(paramsDict["unit"])
else:
unit = 0
mea.addDataToSensorsValuesTable(id_sensor, logval, unit,
val, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device",
data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg, "current", mem[current_key])
mea_utils.xplMsgAddValue(xplMsg, "type", type)
mea_utils.xplMsgAddValue(xplMsg, "last", mem[last_key])
mea.xplSendMsg(xplMsg)
return True
return False
def mea_dataFromSensor(data):
xplMsg = {}
try:
id_type = data["device_type_id"]
id_sensor = data["device_id"]
cmd = data["cmd"]
except:
verbose(2, "ERROR - (mea_dataFromSensor) : data not found")
return False
verbose(9, "INFO (mea_dataFromSensor) : data from ", id_sensor)
mem = mea.getMemory(id_sensor)
if debug == 1:
verbose(9, "INFO - (mea_dataFromSensor) : ", mem)
# voir http://www.tutorialspoint.com/python/python_reg_expressions.htm pour match
x = re.match("^\s*<(.*)>\s*$", cmd[12:-2])
if (x != None):
t = x.group(1)
list = t.split(';')
else:
verbose(5, "WARNING - (mea_dataFromSensor) : data error (", cmd[12:-2],
")")
return False
for i in list:
l2 = i.split('=')
# traitement Humidite
if id_type == 2000 and l2[0] == 'H':
humidite = float(l2[1])
last_h = 0
try:
last_h = mem["current_h"]
mem["last_h"] = mem["current_h"]
except:
pass
mem["current_h"] = humidite
verbose(9, "INFO (mea_dataFromSensor) : humidite =", humidite,
"%")
if last_h != humidite:
current = humidite
type = "humidity"
unit = 5
last = last_h
else:
return True
# traitement temperature
elif id_type == 2001 and l2[0] == 'T':
temperature = float(l2[1])
last_t = 0
try:
last_t = mem["current_t"]
mem["last_t"] = mem["current_t"]
except:
pass
mem["current_t"] = temperature
verbose(9, "INFO (mea_dataFromSensor) : temperature =",
temperature, "C")
if last_t != temperature:
current = temperature
unit = 3
type = "temp"
last = last_t
else:
return True
# traitement niveau piles
elif id_type == 2002 and l2[0] == 'P':
pile = float(l2[1])
last_p = 0
try:
last_p = mem["current_p"]
mem["last_p"] = mem["current_p"]
except:
pass
mem["current_p"] = pile
verbose(9, "INFO (mea_dataFromSensor) : Pile =", pile, "V")
if last_p != pile:
current = pile
unit = 4
type = "volt"
last = last_p
else:
return True
else:
continue
mea.addDataToSensorsValuesTable(id_sensor, current, unit, 0, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", data["device_name"])
mea_utils.xplMsgAddValue(xplMsg, "current", current)
mea_utils.xplMsgAddValue(xplMsg, "type", type)
mea_utils.xplMsgAddValue(xplMsg, "last", last)
mea.xplSendMsg(xplMsg)
return True
def mea_dataFromSensor(data):
xplMsg = {}
try:
id_type=data["device_type_id"]
id_sensor=data["device_id"]
cmd=data["cmd"]
except:
verbose(2, "ERROR - (mea_dataFromSensor) : data not found")
return False
verbose(9, "INFO (mea_dataFromSensor) : data from ", id_sensor)
mem=mea.getMemory(id_sensor)
if debug == 1:
verbose(9, "INFO - (mea_dataFromSensor) : ", mem)
# voir http://www.tutorialspoint.com/python/python_reg_expressions.htm pour match
x=re.match("^\s*<(.*)>\s*$",cmd[12:-2])
if(x!=None):
t=x.group(1)
list=t.split(';')
else:
verbose(5, "WARNING - (mea_dataFromSensor) : data error (", cmd[12:-2], ")")
return False
for i in list:
l2=i.split('=')
# traitement Humidite
if id_type == 2000 and l2[0] == 'H':
humidite = float(l2[1])
last_h=0
try:
last_h=mem["current_h"]
mem["last_h"]=mem["current_h"]
except:
pass
mem["current_h"]=humidite
verbose(9, "INFO (mea_dataFromSensor) : humidite =", humidite, "%")
if last_h != humidite:
current=humidite
type="humidity"
unit=5
last=last_h
else:
return True
# traitement temperature
elif id_type == 2001 and l2[0] == 'T':
temperature = float(l2[1])
last_t=0
try:
last_t=mem["current_t"]
mem["last_t"]=mem["current_t"]
except:
pass
mem["current_t"]=temperature
verbose(9, "INFO (mea_dataFromSensor) : temperature =", temperature, "C")
if last_t != temperature:
current=temperature
unit=3
type="temp"
last=last_t
else:
return True
# traitement niveau piles
elif id_type == 2002 and l2[0] == 'P':
pile = float(l2[1])
last_p=0
try:
last_p=mem["current_p"]
mem["last_p"]=mem["current_p"]
except:
pass
mem["current_p"]=pile
verbose(9, "INFO (mea_dataFromSensor) : Pile =", pile, "V")
if last_p != pile:
current=pile
unit=4
type="volt"
last=last_p
else:
return True
else:
continue
mea.addDataToSensorsValuesTable(id_sensor,current,unit,0,"")
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"])
mea_utils.xplMsgAddValue(xplMsg,"current",current)
mea_utils.xplMsgAddValue(xplMsg,"type",type)
mea_utils.xplMsgAddValue(xplMsg,"last",last)
mea.xplSendMsg(xplMsg)
return True
def mea_dataFromSensor(data):
fn_name=sys._getframe().f_code.co_name
xplMsg = {}
try:
id_sensor=data["device_id"]
cmd_data=data["cmd_data"]
l_cmd_data=data["l_cmd_data"]
data_type=data["data_type"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
if data_type==0x92:
mem["iodata"]=parseIOData(cmd_data, l_cmd_data)
paramsDict=mea_utils.parseKeyValueDatasToDictionary(data["device_parameters"], ",", ":")
if "pin" in paramsDict:
pin=paramsDict["pin"]
else:
return False
if "sensor_type" in paramsDict:
type=paramsDict["sensor_type"]
else:
type="generic"
current_key=pin+"_current"
last_key=pin+"_last"
if pin in mem["iodata"].lower():
val=mem["iodata"][pin]
last_val=0
try:
mem[last_key]=mem[current_key]
except:
mem[last_key]=0
strVal=""
if pin[0]=="d":
if val==1:
mem[current_key]="high"
else:
mem[current_key]="low"
logval=val
else:
if "compute" in paramsDict:
x=val
y=eval(paramsDict["compute"])
logval=round(y,2)
else:
logval=val
mem[current_key]=logval
if mem[current_key] != mem[last_key]:
if "log" in paramsDict and paramsDict["log"].lower()=="yes":
if "unit" in paramsDict:
unit=int(paramsDict["unit"])
else:
unit=0
mea.addDataToSensorsValuesTable(id_sensor,logval,unit,val,"")
xplMsg=mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg,"device", data["device_name"].lower())
mea_utils.xplMsgAddValue(xplMsg,"current", mem[current_key])
mea_utils.xplMsgAddValue(xplMsg,"type", type)
mea_utils.xplMsgAddValue(xplMsg,"last",mem[last_key])
mea.xplSendMsg(xplMsg)
return True
return False
def mea_dataFromSensor(data):
fn_name=str(sys._getframe().f_code.co_name) + "/" + __name__
parameters=False
try:
id_sensor=data["device_id"]
device=data["device_name"]
serial_data=data["data"]
l_serial_data=data["l_data"]
toDbFlag=data["todbflag"]
# parameters=data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
# récupération des paramétres
if parameters <> False:
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
# faire ce qu'il faut ici avec les parametres
# conversion des données si nécessaire
# récupération des données dans une chaine de caractères unicode
s=serial_data.decode('latin-1')
# traitement des données
# récupère (ou pas) un SMS dans les données
sms=mea_getSMS(s)
if sms[0] == False:
if sms[1] == 1:
verbose(2, "ERROR (", fn_name, ") - incomplete SMS data")
else:
verbose(9, "DEBUG (", fn_name, ") - not a SMS")
return False
# analyse des données
alarm=_analyseData(sms[1])
if alarm[0] == False:
verbose(9, "DEBUG (", fn_name, ") - not an EPG message : ", alarm[1])
return False
verbose(9, alarm)
# vérification validité
try:
last_date = datetime.strptime( mem['date']+"-"+ mem['time'], '%d/%m/%Y-%H:%M:%S')
except:
last_date = datetime.fromtimestamp(0);
try:
current_date = datetime.strptime( alarm[2]+"-"+ alarm[3], '%d/%m/%Y-%H:%M:%S')
except:
verbose(9, "ERROR (", fn_name, ") - EPG message date and time error : ", alarm[2]+"-"+alarm[3]+" ?")
return False
if current_date < last_date:
verbose(9, "ERROR (", fn_name, ") - older EPG message than previous received")
return False
now = datetime.now()
d = (now - current_date).total_seconds() / 60;
verbose (9, d)
if d > 15:
verbose(9, "ERROR (", fn_name, ") - too old EPG message")
return False
# memorisation des données
try:
mem['last']=mem['current']
except:
mem['last']=-1
mem['current']=alarm[0]
if alarm[1]==False:
who="";
else:
who=str(alarm[1])
mem['who']=who
mem['date']=str(alarm[2])
mem['time']=str(alarm[3])
mea.addDataToSensorsValuesTable(id_sensor,mem['current'],0,0,who)
# emission XPL
xplMsg=mea_utils.xplMsgNew('me', "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", data["device_name"])
mea_utils.xplMsgAddValue(xplMsg, 'current', mem['current'])
mea.xplSendMsg(xplMsg)
return True
def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
# verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
device_id = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem_device = mea.getMemory(device_id)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
try:
pin = params["pin"]
except:
verbose(2, "ERROR (", fn_name, ") - ", device_name,
" parameters error : no PIN defined")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - ", device_name,
" PIN format error")
return False
if pin[0] != 'l' and pin[0] != 'a':
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN type error")
return Flase
else:
pinType = pin[0]
if pin[1] < '0' or pin[1] > '9':
verbose(2, "ERROR (", fn_name, ") - ", device_name,
" PIN number error")
return False
else:
pinNum = int(pin[1])
# on va traiter les données prémachées par mea_serialDataPre
if "sendFlag" in mem_interface[pinNum] and mem_interface[pinNum][
"sendFlag"] == True:
if "current" in mem_interface[pinNum]:
current_value = mem_interface[pinNum]["current"]
if pinType == 'l':
if mem_interface[pinNum]["current"] == 0:
current_value = "low"
else:
current_value = "high"
mea.addDataToSensorsValuesTable(device_id,
mem_interface[pinNum]["current"],
0, 0, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
return False
def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
# verbose(9, "DEBUG (", fn_name, ") data = ", data)
try:
device_id = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem_device = mea.getMemory(device_id)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
try:
pin = params["pin"]
except:
verbose(2, "ERROR (", fn_name, ") - ", device_name, " parameters error : no PIN defined")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN format error")
return False
if pin[0] != "l" and pin[0] != "a":
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN type error")
return Flase
else:
pinType = pin[0]
if pin[1] < "0" or pin[1] > "9":
verbose(2, "ERROR (", fn_name, ") - ", device_name, " PIN number error")
return False
else:
pinNum = int(pin[1])
# on va traiter les données prémachées par mea_serialDataPre
if "sendFlag" in mem_interface[pinNum] and mem_interface[pinNum]["sendFlag"] == True:
if "current" in mem_interface[pinNum]:
current_value = mem_interface[pinNum]["current"]
if pinType == "l":
if mem_interface[pinNum]["current"] == 0:
current_value = "low"
else:
current_value = "high"
mea.addDataToSensorsValuesTable(device_id, mem_interface[pinNum]["current"], 0, 0, "")
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
return False
def mea_dataFromSensor(data):
fn_name=str(sys._getframe().f_code.co_name) + "/" + __name__
parameters=False
try:
id_sensor=data["device_id"]
device=data["device_name"]
serial_data=data["data"]
l_serial_data=data["l_data"]
toDbFlag=data["todbflag"]
# parameters=data["device_parameters"]
except:
verbose(2, "ERROR (", fn_name, ") - invalid data")
return False
mem=mea.getMemory(id_sensor)
# récupération des paramétres
if parameters <> False:
params=mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
# faire ce qu'il faut ici avec les parametres
# conversion des données si nécessaire
# récupération des données dans une chaine de caractères unicode
s=serial_data.decode('latin-1')
# traitement des données
# récupère (ou pas) un SMS dans les données
sms=mea_getSMS(s)
if sms[0] == False:
if sms[1] == 1:
verbose(2, "ERROR (", fn_name, ") - incomplete SMS data")
else:
verbose(9, "DEBUG (", fn_name, ") - not a SMS")
return False
# analyse des données
alarm=_analyseData(sms[1])
if alarm[0] == False:
verbose(9, "DEBUG (", fn_name, ") - not an EPG message : ", alarm[1])
return False
verbose(9, alarm)
# vérification validité
try:
last_date = datetime.strptime( mem['date']+"-"+ mem['time'], '%d/%m/%Y-%H:%M:%S')
except:
last_date = datetime.fromtimestamp(0);
try:
current_date = datetime.strptime( alarm[2]+"-"+ alarm[3], '%d/%m/%Y-%H:%M:%S')
except:
verbose(9, "ERROR (", fn_name, ") - EPG message date and time error : ", alarm[2]+"-"+alarm[3]+" ?")
return False
if current_date < last_date:
verbose(9, "ERROR (", fn_name, ") - older EPG message than previous received")
return False
now = datetime.now()
d = (now - current_date).total_seconds() / 60;
verbose (9, d)
if d > 15:
verbose(9, "ERROR (", fn_name, ") - too old EPG message")
return False
# memorisation des données
try:
mem['last']=mem['current']
except:
mem['last']=-1
mem['current']=alarm[0]
if alarm[1]==False:
who="";
else:
who=str(alarm[1])
mem['who']=who
mem['date']=str(alarm[2])
mem['time']=str(alarm[3])
mea.addDataToSensorsValuesTable(id_sensor,mem['current'],0,0,who)
# emission XPL
xplMsg=mea_utils.xplMsgNew('me', "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", data["device_name"])
mea_utils.xplMsgAddValue(xplMsg, 'current', mem['current'])
mea.xplSendMsg(xplMsg)
return True