def main():
import meshpy.triangle as triangle
import numpy as np
points = [(1, 1), (-1, 1), (-1, -1), (1, -1)]
for pt in np.random.randn(100, 2):
points.append(pt * 0.1)
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i + 1))
result.append((end, start))
return result
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(round_trip_connect(0, 3))
mesh = triangle.build(
info, allow_volume_steiner=False, allow_boundary_steiner=False
)
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
import meshpy.triangle as triangle
import math
import pickle
segments = 50
points = [(-5,-1), (-1,-1), (0,-1), (0,0), (1,0), (5,0), (5,1), (1,1),
(-1,1), (-5,1)]
def round_trip_connect(seq):
result = []
for i in range(len(seq)):
result.append((seq[i], seq[(i+1)%len(seq)]))
return result
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(
round_trip_connect([0,1,8,9])
+round_trip_connect([1,2,3,4,7,8])
+round_trip_connect([4,5,6,7])
)
info.regions.resize(3)
info.regions[0] = (-2,0, 1,0.1)
info.regions[1] = (-0.5,0, 0,0.01)
info.regions[2] = (1.5,0.5, 1,0.1)
mesh = triangle.build(info)
triangle.write_gnuplot_mesh("triangles.dat", mesh)
mesh.write_neu(open("tri_pml.neu", "w"))
def main():
import meshpy.triangle as triangle
import math
points = [ (1,1),(-1,1),(-1,-1),(1,-1) ]
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i+1))
result.append((end, start))
return result
def needs_refinement(vertices, area ):
vert_origin, vert_destination, vert_apex = vertices
bary_x = (vert_origin.x + vert_destination.x + vert_apex.x) / 3
bary_y = (vert_origin.y + vert_destination.y + vert_apex.y) / 3
dist_center = math.sqrt( (bary_x-1)**2 + (bary_y-1)**2 )
max_area = math.fabs( 0.05 * (dist_center-0.5) ) + 0.01
return area > max_area
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(round_trip_connect(0, len(points)-1))
mesh = triangle.build(info, refinement_func=needs_refinement)
mesh.write_neu(open("nico.neu", "w"))
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
import meshpy.triangle as triangle
import math
points = [ (1,1),(-1,1),(-1,-1),(1,-1) ]
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i+1))
result.append((end, start))
return result
def needs_refinement(vertices, area ):
vert_origin, vert_destination, vert_apex = vertices
bary_x = (vert_origin.x + vert_destination.x + vert_apex.x) / 3
bary_y = (vert_origin.y + vert_destination.y + vert_apex.y) / 3
dist_center = math.sqrt( (bary_x-1)**2 + (bary_y-1)**2 )
max_area = math.fabs( 0.05 * (dist_center-0.5) ) + 0.01
return area > max_area
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(round_trip_connect(0, len(points)-1))
mesh = triangle.build(info, refinement_func=needs_refinement)
mesh.write_neu(open("nico.neu", "w"))
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
import meshpy.triangle as triangle
import math
import pickle
segments = 50
points = [(-5, -1), (-1, -1), (0, -1), (0, 0), (1, 0), (5, 0), (5, 1),
(1, 1), (-1, 1), (-5, 1)]
def round_trip_connect(seq):
result = []
for i in range(len(seq)):
result.append((seq[i], seq[(i + 1) % len(seq)]))
return result
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(
round_trip_connect([0, 1, 8, 9]) +
round_trip_connect([1, 2, 3, 4, 7, 8]) +
round_trip_connect([4, 5, 6, 7]))
info.regions.resize(3)
info.regions[0] = (-2, 0, 1, 0.1)
info.regions[1] = (-0.5, 0, 0, 0.01)
info.regions[2] = (1.5, 0.5, 1, 0.1)
mesh = triangle.build(info)
triangle.write_gnuplot_mesh("triangles.dat", mesh)
mesh.write_neu(open("tri_pml.neu", "w"))
def main():
a6 = A6Triangulator()
mesh = a6.make_triangulation(max_area=2e-6)
import meshpy.triangle as triangle
triangle.write_gnuplot_mesh("magnetron.dat", mesh)
mesh.write_neu(open("magnetron.neu", "w"),
bc={
a6.cathode_marker:("cathode", a6.cathode_marker),
a6.anode_marker:("anode", a6.anode_marker),
a6.open_marker:("open", a6.open_marker)})
def main():
import meshpy.triangle as triangle
import math
import pickle
segments = 50
points = [(1, 0), (1, 1), (-1, 1), (-1, -1), (1, -1), (1, 0)]
for i in range(0, segments + 1):
angle = i * 2 * math.pi / segments
points.append((0.5 * math.cos(angle), 0.5 * math.sin(angle)))
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i + 1))
result.append((end, start))
return result
def needs_refinement(vertices, area):
vert_origin, vert_destination, vert_apex = vertices
bary_x = (vert_origin.x + vert_destination.x + vert_apex.x) / 3
bary_y = (vert_origin.y + vert_destination.y + vert_apex.y) / 3
dist_center = math.sqrt(bary_x**2 + bary_y**2)
max_area = 100 * (math.fabs(0.002 * (dist_center - 0.5)) + 0.0001)
return area > max_area
info = triangle.MeshInfo()
info.set_points(points)
info.set_holes([(0, 0)])
info.set_facets(round_trip_connect(0, len(points) - 1))
mesh = triangle.build(
info,
refinement_func=needs_refinement,
)
triangle.write_gnuplot_mesh("triangles-unrefined.dat", mesh)
print len(mesh.elements)
mesh.element_volumes.setup()
for i in range(len(mesh.elements)):
mesh.element_volumes[i] = -1
for i in range(0, len(mesh.elements), 10):
mesh.element_volumes[i] = 1e-8
mesh = triangle.refine(mesh)
print len(mesh.elements)
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
a6 = A6Triangulator()
mesh = a6.make_triangulation(max_area=2e-6)
import meshpy.triangle as triangle
triangle.write_gnuplot_mesh("magnetron.dat", mesh)
mesh.write_neu(open("magnetron.neu", "w"),
bc={
a6.cathode_marker: ("cathode", a6.cathode_marker),
a6.anode_marker: ("anode", a6.anode_marker),
a6.open_marker: ("open", a6.open_marker)
})
def main():
import meshpy.triangle as triangle
import math
import pickle
segments = 50
points = [ (1,0),(1,1),(-1,1),(-1,-1),(1,-1),(1,0) ]
for i in range( 0, segments + 1 ):
angle = i * 2 * math.pi / segments
points.append( ( 0.5 * math.cos( angle ), 0.5 * math.sin( angle ) ) )
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i+1))
result.append((end, start))
return result
def needs_refinement(vertices, area ):
vert_origin, vert_destination, vert_apex = vertices
bary_x = (vert_origin.x + vert_destination.x + vert_apex.x) / 3
bary_y = (vert_origin.y + vert_destination.y + vert_apex.y) / 3
dist_center = math.sqrt( bary_x**2 + bary_y**2 )
max_area = 100*(math.fabs( 0.002 * (dist_center-0.5) ) + 0.0001)
return area > max_area
info = triangle.MeshInfo()
info.set_points(points)
info.set_holes([(0,0)])
info.set_facets(round_trip_connect(0, len(points)-1))
mesh = triangle.build(info, refinement_func=needs_refinement,
)
triangle.write_gnuplot_mesh("triangles-unrefined.dat", mesh)
print(len(mesh.elements))
mesh.element_volumes.setup()
for i in range(len(mesh.elements)):
mesh.element_volumes[i] = -1
for i in range(0, len(mesh.elements), 10):
mesh.element_volumes[i] = 1e-8
mesh = triangle.refine(mesh)
print(len(mesh.elements))
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
import meshpy.triangle as triangle
import math
segments = 10
points = [ (1,0),(1,1),(-1,1),(-1,-1),(1,-1),(1,0) ]
for i in range( 0, segments + 1 ):
angle = i * 2 * math.pi / segments
points.append( ( 0.5 * math.cos( angle ), 0.5 * math.sin( angle ) ) )
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i+1))
result.append((end, start))
return result
def needs_refinement(vertices, area ):
vert_origin, vert_destination, vert_apex = vertices
bary_x = (vert_origin.x + vert_destination.x + vert_apex.x) / 3
bary_y = (vert_origin.y + vert_destination.y + vert_apex.y) / 3
dist_center = math.sqrt( bary_x**2 + bary_y**2 )
max_area = math.fabs( 0.002 * (dist_center-0.5) ) + 0.0001
return area > max_area
info = triangle.MeshInfo()
info.set_points(points)
info.set_holes([(0,0)])
info.set_facets(round_trip_connect(0, len(points)-1))
mesh = triangle.build(info, refinement_func=needs_refinement)
import numpy as np
#np.set_printoptions(threshold=100000)
print repr(np.array(mesh.points))
print repr(np.array(mesh.elements))
#import pickle
#pickled = pickle.dumps(mesh)
#mesh_2 = pickle.loads(pickled)
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i+1))
result.append((end, start))
return result
corners, mesh1, mesh2 = generate_meshes(2, 1, 0.3)
points = get_vertices(corners, mesh1, mesh2)
print "points", np.array(points)
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(round_trip_connect(0, len(corners)-1))
mesh = triangle.build(info, allow_volume_steiner=False, allow_boundary_steiner=False, min_angle=60)
if False:
print "vertices:"
for i, p in enumerate(mesh.points):
print i, p
print "point numbers in triangles:"
for i, t in enumerate(mesh.elements):
print i, t
finemesh = Mesh()
ME = MeshEditor()
ME.open(finemesh,2,2)
ME.init_vertices(len(mesh.points))
ME.init_cells(len(mesh.elements))
for i,v in enumerate(mesh.points):
ME.add_vertex(i,v[0],v[1])
for i,c in enumerate(mesh.elements):
ME.add_cell(i,c[0],c[1],c[2])
ME.close()
triangle.write_gnuplot_mesh("triangles.dat", mesh)
plot(mesh1)
plot(mesh2)
plot(finemesh)
interactive()
def main():
import meshpy.triangle as triangle
points = [(1, 1), (-1, 1), (-1, -1), (1, -1)]
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i + 1))
result.append((end, start))
return result
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(round_trip_connect(0, len(points) - 1))
mesh = triangle.build(info, max_volume=1e-3, min_angle=25)
print("A")
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
import meshpy.triangle as triangle
points = [ (1,1),(-1,1),(-1,-1),(1,-1)]
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i+1))
result.append((end, start))
return result
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(round_trip_connect(0, len(points)-1))
mesh = triangle.build(info, max_volume=1e-3, min_angle=25)
print "A"
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def main():
import meshpy.triangle as triangle
import numpy as np
points = [ (1,1),(-1,1),(-1,-1),(1,-1) ]
for pt in np.random.randn(100, 2):
points.append(pt*0.1)
def round_trip_connect(start, end):
result = []
for i in range(start, end):
result.append((i, i+1))
result.append((end, start))
return result
info = triangle.MeshInfo()
info.set_points(points)
info.set_facets(round_trip_connect(0, 3))
mesh = triangle.build(info, allow_volume_steiner=False,
allow_boundary_steiner=False)
triangle.write_gnuplot_mesh("triangles.dat", mesh)
def make_squaremesh():
def round_trip_connect(seq):
result = []
for i in range(len(seq)):
result.append((i, (i + 1) % len(seq)))
return result
def needs_refinement(vertices, area):
x = sum(numpy.array(v) for v in vertices) / 3
max_area_volume = 0.7e-2 + 0.03 * (0.05 * x[1]**2 +
0.3 * min(x[0] + 1, 0)**2)
max_area_corners = 1e-3 + 0.001 * max(
la.norm(x - corner)**4 for corner in obstacle_corners)
return bool(area > 2.5 * min(max_area_volume, max_area_corners))
from meshpy.geometry import make_box
points, facets, _, _ = make_box((-0.5, -0.5), (0.5, 0.5))
obstacle_corners = points[:]
from meshpy.geometry import GeometryBuilder, Marker
profile_marker = Marker.FIRST_USER_MARKER
builder = GeometryBuilder()
builder.add_geometry(points=points,
facets=facets,
facet_markers=profile_marker)
points, facets, _, facet_markers = make_box((-16, -22), (25, 22))
builder.add_geometry(points=points,
facets=facets,
facet_markers=facet_markers)
from meshpy.triangle import MeshInfo, build
mi = MeshInfo()
builder.set(mi)
mi.set_holes([(0, 0)])
mesh = build(mi,
refinement_func=needs_refinement,
allow_boundary_steiner=True,
generate_faces=True)
print("%d elements" % len(mesh.elements))
from meshpy.triangle import write_gnuplot_mesh
write_gnuplot_mesh("mesh.dat", mesh)
fvi2fm = mesh.face_vertex_indices_to_face_marker
face_marker_to_tag = {
profile_marker: "noslip",
Marker.MINUS_X: "inflow",
Marker.PLUS_X: "outflow",
Marker.MINUS_Y: "inflow",
Marker.PLUS_Y: "inflow"
}
def bdry_tagger(fvi, el, fn, all_v):
face_marker = fvi2fm[fvi]
return [face_marker_to_tag[face_marker]]
from grudge.mesh import make_conformal_mesh_ext
vertices = numpy.asarray(mesh.points, dtype=float, order="C")
from grudge.mesh.element import Triangle
return make_conformal_mesh_ext(vertices, [
Triangle(i, el_idx, vertices) for i, el_idx in enumerate(mesh.elements)
], bdry_tagger)
def uniform_refine_triangles(points, elements, factor=2):
new_points = points[:]
new_elements = []
old_face_to_new_faces = {}
face_point_dict = {}
points_per_edge = factor+1
def get_refined_face(a, b):
if a > b:
a, b = b, a
flipped = True
else:
flipped = False
try:
face_points = face_point_dict[a, b]
except KeyError:
a_pt, b_pt = [points[idx] for idx in [a, b]]
dx = (b_pt - a_pt)/factor
# build subdivided facet
face_points = [a]
for i in range(1, points_per_edge-1):
face_points.append(len(new_points))
new_points.append(a_pt + dx*i)
face_points.append(b)
face_point_dict[a, b] = face_points
# build old_face_to_new_faces
old_face_to_new_faces[frozenset([a, b])] = [
(face_points[i], face_points[i+1])
for i in range(factor)]
if flipped:
return face_points[::-1]
else:
return face_points
for a, b, c in elements:
a_pt, b_pt, c_pt = [points[idx] for idx in [a, b, c]]
dr = (b_pt - a_pt)/factor
ds = (c_pt - a_pt)/factor
ab_refined, bc_refined, ac_refined = [
get_refined_face(*pt_indices)
for pt_indices in [(a, b), (b, c), (a, c)]]
el_point_dict = {}
# fill out edges of el_point_dict
for i in range(points_per_edge):
el_point_dict[i, 0] = ab_refined[i]
el_point_dict[0, i] = ac_refined[i]
el_point_dict[points_per_edge-1-i, i] = bc_refined[i]
# fill out interior of el_point_dict
for i in range(1, points_per_edge-1):
for j in range(1, points_per_edge-1-i):
el_point_dict[i, j] = len(new_points)
new_points.append(a_pt + dr*i + ds*j)
# generate elements
for i in range(0, points_per_edge-1):
for j in range(0, points_per_edge-1-i):
new_elements.append((
el_point_dict[i, j],
el_point_dict[i+1, j],
el_point_dict[i, j+1],
))
if i+1+j+1 <= factor:
new_elements.append((
el_point_dict[i+1, j+1],
el_point_dict[i+1, j],
el_point_dict[i, j+1],
))
from meshpy.triangle import MeshInfo
mi = MeshInfo()
mi.set_points(new_points)
mi.elements.resize(len(new_elements))
for i, el in enumerate(new_elements):
mi.elements[i] = el
from meshpy.triangle import write_gnuplot_mesh
write_gnuplot_mesh("mesh.dat", mi)
return new_points, new_elements, old_face_to_new_faces
def make_squaremesh():
def round_trip_connect(seq):
result = []
for i in range(len(seq)):
result.append((i, (i+1)%len(seq)))
return result
def needs_refinement(vertices, area):
x = sum(numpy.array(v) for v in vertices)/3
max_area_volume = 0.7e-2 + 0.03*(0.05*x[1]**2 + 0.3*min(x[0]+1,0)**2)
max_area_corners = 1e-3 + 0.001*max(
la.norm(x-corner)**4 for corner in obstacle_corners)
return bool(area > 2.5*min(max_area_volume, max_area_corners))
from meshpy.geometry import make_box
points, facets, _, _ = make_box((-0.5,-0.5), (0.5,0.5))
obstacle_corners = points[:]
from meshpy.geometry import GeometryBuilder, Marker
profile_marker = Marker.FIRST_USER_MARKER
builder = GeometryBuilder()
builder.add_geometry(points=points, facets=facets,
facet_markers=profile_marker)
points, facets, _, facet_markers = make_box((-16, -22), (25, 22))
builder.add_geometry(points=points, facets=facets,
facet_markers=facet_markers)
from meshpy.triangle import MeshInfo, build
mi = MeshInfo()
builder.set(mi)
mi.set_holes([(0,0)])
mesh = build(mi, refinement_func=needs_refinement,
allow_boundary_steiner=True,
generate_faces=True)
print "%d elements" % len(mesh.elements)
from meshpy.triangle import write_gnuplot_mesh
write_gnuplot_mesh("mesh.dat", mesh)
fvi2fm = mesh.face_vertex_indices_to_face_marker
face_marker_to_tag = {
profile_marker: "noslip",
Marker.MINUS_X: "inflow",
Marker.PLUS_X: "outflow",
Marker.MINUS_Y: "inflow",
Marker.PLUS_Y: "inflow"
}
def bdry_tagger(fvi, el, fn, all_v):
face_marker = fvi2fm[fvi]
return [face_marker_to_tag[face_marker]]
from hedge.mesh import make_conformal_mesh_ext
vertices = numpy.asarray(mesh.points, dtype=float, order="C")
from hedge.mesh.element import Triangle
return make_conformal_mesh_ext(
vertices,
[Triangle(i, el_idx, vertices)
for i, el_idx in enumerate(mesh.elements)],
bdry_tagger)
def make_nacamesh():
def round_trip_connect(seq):
result = []
for i in range(len(seq)):
result.append((i, (i + 1) % len(seq)))
return result
pt_back = numpy.array([1, 0])
#def max_area(pt):
#max_area_front = 1e-2*la.norm(pt)**2 + 1e-5
#max_area_back = 1e-2*la.norm(pt-pt_back)**2 + 1e-4
#return min(max_area_front, max_area_back)
def max_area(pt):
x = pt[0]
if x < 0:
return 1e-2 * la.norm(pt)**2 + 1e-5
elif x > 1:
return 1e-2 * la.norm(pt - pt_back)**2 + 1e-5
else:
return 1e-2 * pt[1]**2 + 1e-5
def needs_refinement(vertices, area):
barycenter = sum(numpy.array(v) for v in vertices) / 3
return bool(area > max_area(barycenter))
from meshpy.naca import get_naca_points
points = get_naca_points(naca_digits="2412", number_of_points=80)
from meshpy.geometry import GeometryBuilder, Marker
from meshpy.triangle import write_gnuplot_mesh
profile_marker = Marker.FIRST_USER_MARKER
builder = GeometryBuilder()
builder.add_geometry(points=points,
facets=round_trip_connect(points),
facet_markers=profile_marker)
builder.wrap_in_box(4, (10, 8))
from meshpy.triangle import MeshInfo, build
mi = MeshInfo()
builder.set(mi)
mi.set_holes([builder.center()])
mesh = build(
mi,
refinement_func=needs_refinement,
#allow_boundary_steiner=False,
generate_faces=True)
write_gnuplot_mesh("mesh.dat", mesh)
print("%d elements" % len(mesh.elements))
fvi2fm = mesh.face_vertex_indices_to_face_marker
face_marker_to_tag = {
profile_marker: "noslip",
Marker.MINUS_X: "inflow",
Marker.PLUS_X: "outflow",
Marker.MINUS_Y: "inflow",
Marker.PLUS_Y: "inflow"
#Marker.MINUS_Y: "minus_y",
#Marker.PLUS_Y: "plus_y"
}
def bdry_tagger(fvi, el, fn, all_v):
face_marker = fvi2fm[fvi]
return [face_marker_to_tag[face_marker]]
from grudge.mesh import make_conformal_mesh_ext
vertices = numpy.asarray(mesh.points, order="C")
from grudge.mesh.element import Triangle
return make_conformal_mesh_ext(
vertices,
[
Triangle(i, el_idx, vertices)
for i, el_idx in enumerate(mesh.elements)
],
bdry_tagger,
#periodicity=[None, ("minus_y", "plus_y")]
)
def uniform_refine_triangles(points, elements, factor=2):
new_points = points[:]
new_elements = []
old_face_to_new_faces = {}
face_point_dict = {}
points_per_edge = factor + 1
def get_refined_face(a, b):
if a > b:
a, b = b, a
flipped = True
else:
flipped = False
try:
face_points = face_point_dict[a, b]
except KeyError:
a_pt, b_pt = [points[idx] for idx in [a, b]]
dx = (b_pt - a_pt) / factor
# build subdivided facet
face_points = [a]
for i in range(1, points_per_edge - 1):
face_points.append(len(new_points))
new_points.append(a_pt + dx * i)
face_points.append(b)
face_point_dict[a, b] = face_points
# build old_face_to_new_faces
old_face_to_new_faces[frozenset([a, b])] = [
(face_points[i], face_points[i + 1]) for i in range(factor)
]
if flipped:
return face_points[::-1]
else:
return face_points
for a, b, c in elements:
a_pt, b_pt, c_pt = [points[idx] for idx in [a, b, c]]
dr = (b_pt - a_pt) / factor
ds = (c_pt - a_pt) / factor
ab_refined, bc_refined, ac_refined = [
get_refined_face(*pt_indices)
for pt_indices in [(a, b), (b, c), (a, c)]
]
el_point_dict = {}
# fill out edges of el_point_dict
for i in range(points_per_edge):
el_point_dict[i, 0] = ab_refined[i]
el_point_dict[0, i] = ac_refined[i]
el_point_dict[points_per_edge - 1 - i, i] = bc_refined[i]
# fill out interior of el_point_dict
for i in range(1, points_per_edge - 1):
for j in range(1, points_per_edge - 1 - i):
el_point_dict[i, j] = len(new_points)
new_points.append(a_pt + dr * i + ds * j)
# generate elements
for i in range(0, points_per_edge - 1):
for j in range(0, points_per_edge - 1 - i):
new_elements.append((
el_point_dict[i, j],
el_point_dict[i + 1, j],
el_point_dict[i, j + 1],
))
if i + 1 + j + 1 <= factor:
new_elements.append((
el_point_dict[i + 1, j + 1],
el_point_dict[i + 1, j],
el_point_dict[i, j + 1],
))
from meshpy.triangle import MeshInfo
mi = MeshInfo()
mi.set_points(new_points)
mi.elements.resize(len(new_elements))
for i, el in enumerate(new_elements):
mi.elements[i] = el
from meshpy.triangle import write_gnuplot_mesh
write_gnuplot_mesh("mesh.dat", mi)
return new_points, new_elements, old_face_to_new_faces
def make_nacamesh():
def round_trip_connect(seq):
result = []
for i in range(len(seq)):
result.append((i, (i + 1) % len(seq)))
return result
pt_back = numpy.array([1, 0])
# def max_area(pt):
# max_area_front = 1e-2*la.norm(pt)**2 + 1e-5
# max_area_back = 1e-2*la.norm(pt-pt_back)**2 + 1e-4
# return min(max_area_front, max_area_back)
def max_area(pt):
x = pt[0]
if x < 0:
return 1e-2 * la.norm(pt) ** 2 + 1e-5
elif x > 1:
return 1e-2 * la.norm(pt - pt_back) ** 2 + 1e-5
else:
return 1e-2 * pt[1] ** 2 + 1e-5
def needs_refinement(vertices, area):
barycenter = sum(numpy.array(v) for v in vertices) / 3
return bool(area > max_area(barycenter))
from meshpy.naca import get_naca_points
points = get_naca_points(naca_digits="2412", number_of_points=80)
from meshpy.geometry import GeometryBuilder, Marker
from meshpy.triangle import write_gnuplot_mesh
profile_marker = Marker.FIRST_USER_MARKER
builder = GeometryBuilder()
builder.add_geometry(points=points, facets=round_trip_connect(points), facet_markers=profile_marker)
builder.wrap_in_box(4, (10, 8))
from meshpy.triangle import MeshInfo, build
mi = MeshInfo()
builder.set(mi)
mi.set_holes([builder.center()])
mesh = build(
mi,
refinement_func=needs_refinement,
# allow_boundary_steiner=False,
generate_faces=True,
)
write_gnuplot_mesh("mesh.dat", mesh)
print "%d elements" % len(mesh.elements)
fvi2fm = mesh.face_vertex_indices_to_face_marker
face_marker_to_tag = {
profile_marker: "noslip",
Marker.MINUS_X: "inflow",
Marker.PLUS_X: "outflow",
Marker.MINUS_Y: "inflow",
Marker.PLUS_Y: "inflow"
# Marker.MINUS_Y: "minus_y",
# Marker.PLUS_Y: "plus_y"
}
def bdry_tagger(fvi, el, fn, all_v):
face_marker = fvi2fm[fvi]
return [face_marker_to_tag[face_marker]]
from hedge.mesh import make_conformal_mesh_ext
vertices = numpy.asarray(mesh.points, order="C")
from hedge.mesh.element import Triangle
return make_conformal_mesh_ext(
vertices,
[Triangle(i, el_idx, vertices) for i, el_idx in enumerate(mesh.elements)],
bdry_tagger,
# periodicity=[None, ("minus_y", "plus_y")]
)
if __name__ == '__main__':
#Create the intial mesh node pts
nodepts = createInitialTriGridPts(4, 4)
#Define the element triangles that link the nodes
elements = defineElementConnectivity(nodepts)
mesh_info = MeshInfo()
print(nodepts)
mesh_info.set_points(nodepts)
print(elements.simplices)
mesh_info.set_facets(elements.simplices)
mesh = build(mesh_info)
#mesh.triangle.
write_gnuplot_mesh("test.vtk", mesh_info.points, facets=False)
#triangle=showMesh(nodepts,elements.simplices)
print(elements)
print(elements.simplices)
print(elements.points)
nodepts, elements = refineMesh(nodepts, elements, 7)
nodepts, elements = refineMesh(nodepts, elements, 20)
#nodepts,elements = refineMesh(nodepts,elements,100)
#nodepts,elements = refineMesh(nodepts,elements,50)
#nodepts,elements = refineMesh(nodepts,elements,2)
#nodepts,elements = refineMesh(nodepts,elements,10)
triangle = showMesh(nodepts, elements.simplices, displayType='wireframe')
neighbours = elements.neighbors[7]
