def main():
config = Config()
# model.restore_session("results/crf/model.weights/") # optional, restore weights
# model.reinitialize_weights("proj")
# create datasets [(char_ids), word_id]
processing_word = get_processing_word(lowercase=False)
dev = CoNLLDataset(config.filename_dev, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
entities = []
for raw_words, raw_tags in test:
chunks = get_chunks_from_tags(raw_tags)
for _, chunk_start, chunk_end in chunks:
entity = 'ENTITY/'
for i in range(chunk_start, chunk_end):
if i == chunk_end - 1:
entity += raw_words[i]
else:
entity = entity + raw_words[i] + '_'
entities.append(entity)
# print(len(entities))
# print(entities)
entities = set(entities)
print(len(entities))
vocab_glove = get_glove_vocab(config.filename_glove)
print(len(entities & vocab_glove))
def main():
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
# Generators
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True) # 把字符全部小写，数字替换成NUM
# Generators
dev = CoNLLDataset(config.filename_dev,
processing_word) # 创建一个生成器对象，每一次迭代产生tuple （words，tags）
test = CoNLLDataset(config.filename_test,
processing_word) # 返回一句话（words），和标签tags
train = CoNLLDataset(config.filename_train, processing_word)
#进一步处理数据
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test]) # word词表， tags表
print(len(vocab_words))
vocab_glove = get_glove_vocab(config.filename_glove) # glove词表
vocab = vocab_words & vocab_glove # & 求交集 set，都是集合
vocab.add(UNK)
vocab.add(NUM) # 手动添加
print("len of vocab without entity: ", len(vocab))
# vocab_entity = entity2vocab(datasets=[train, dev, test])
# vocab.update(vocab_entity)
# vocab = entity2vocab(datasets=[train, dev], vocab=vocab)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words) # 得到dict类型的vocab：{word:index}
# 针对vocab，生成numpy的embedding文件，包含一个矩阵，对应词嵌入
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab 生成字母表, 这里没用到小写化的东西。只有文件本身。
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
# Generators
dev = CoNLLDataset(config.filename_dev, processing_word, task=config.task)
test = CoNLLDataset(config.filename_test,
processing_word,
task=config.task)
train = CoNLLDataset(config.filename_train,
processing_word,
task=config.task)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
#TODO get word2vec vocab too
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# Save word and tag vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# write and trim GloVe and word2vec Vectors
vocab = load_vocab(config.filename_words)
write_word2vec_to_txtfile(config.path_to_word2vec_bin_file,
config.filename_word2vec)
export_trimmed_word2vec_vectors(vocab, config.filename_word2vec,
config.trimmed_word2vec_filename,
config.dim_word)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.trimmed_glove_filename,
config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
if config.task == 'pos':
print("USING POS")
config.filename_train = "data/train.pos" # test
config.filename_dev = "data/dev.pos"
config.filename_test = "data/test.pos"
else:
print("USING NER")
processing_word = get_processing_word(lowercase=True)
# Generators
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
pw_function = get_processing_word(lowercase=True)
# Generators
dev = Dataset(config.filename_dev, processing_word=pw_function)
test = Dataset(config.filename_test, processing_word=pw_function)
train = Dataset(config.filename_train, processing_word=pw_function)
# Build Words
vocab_words = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab = list(vocab)
pronouns_in_vocab = move_pronouns(vocab)
write_vocab(pronouns_in_vocab, config.filename_pronouns)
# add START, STOP, PAD, UNK and NUM tokens into the list
add_special_tokens(vocab)
assert PAD_TOKEN == vocab[0]
assert UNKNOWN_TOKEN in vocab
# Save vocab
write_vocab(vocab, config.filename_words)
# Trim GloVe Vectors
vocab, _ = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = Dataset(config.filename_train)
vocab_chars = get_char_vocab(train)
vocab_chars = list(vocab_chars)
vocab_chars.insert(0, PAD_TOKEN)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
# Generators
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
# 与glove中的词集合求交,只保留有向量的那些词
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# Save vocab, vocab: set()
print("write vocab set to file: " + config.filename_words)
write_vocab(vocab, config.filename_words)
print("write vocab tags set to file: " + config.filename_tags)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors, 只加载那些在词集合中出现过的词向量
vocab_to_index_dict = load_vocab(config.filename_words)
# vocab: dict, vocab[word] = word_index
print("export trimmed vocab embedding to file: " + config.filename_trimmed)
export_trimmed_glove_vectors(vocab_to_index_dict, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
print("save char set to file:" + config.filename_chars)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
# Generators
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
# Build Word and Tag vocab (only from train!)
vocab_words, vocab_freqs, vocab_tags = get_vocabs([train]) #, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
#vocab = make_unks(vocab, vocab_freqs, config.p_unk)
#vocab.add(UNK)
vocab.add(NUM)
vocab = [UNK] + list(vocab)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# get singletons
singletons = [k for k, v in vocab_freqs.items() if v == 1]
write_vocab(singletons, config.filename_singletons)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
processing_pos = get_processing_word()
processing_chunk = get_processing_word()
# Generators
dev = CoNLLDataset(config.filename_dev, processing_word, processing_pos,
processing_chunk)
test = CoNLLDataset(config.filename_test, processing_word, processing_pos,
processing_chunk)
train = CoNLLDataset(config.filename_train, processing_word,
processing_pos, processing_chunk)
# Build Word and Tag vocab
vocab_words, vocab_tags, vocab_poses, vocab_chunks = get_vocabs(
[train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = [i for i in vocab_words if i in vocab_glove]
vocab.append(UNK)
vocab.append(NUM)
vocab.append("$pad$")
vocab_poses.append("$pad$")
vocab_chunks.append("$pad$")
vocab_tags.append("$pad$")
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
write_vocab(vocab_poses, config.filename_poses)
write_vocab(vocab_chunks, config.filename_chunks)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
print(len(vocab))
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
vocab = load_vocab(config.filename_poses)
export_trimed_ont_hot_vectors(vocab, config.filename_pos_trimmed)
vocab = load_vocab(config.filename_chunks)
export_trimed_ont_hot_vectors(vocab, config.filename_chunk_trimmed)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
vocab_chars.append("$pad$")
write_vocab(vocab_chars, config.filename_chars)
def main():
# get config and processing of words
config = Config(load=False)
# should be source_x.txt
# or ontonotes-nw if you like
config.filename_train = "../datasets/ritter2011/train"
config.filename_dev = "../datasets/ritter2011/dev"
config.filename_test = "../datasets/ritter2011/test"
config.filename_chars = config.filename_chars.replace("source", "target")
config.filename_glove = config.filename_glove.replace("source", "target")
config.filename_tags = config.filename_tags.replace("source", "target")
config.filename_words = config.filename_words.replace("source", "target")
config.dir_model = config.dir_model.replace("source", "target")
config.dir_output = config.dir_output.replace("source", "target")
config.path_log = config.path_log.replace("source", "target")
processing_word = get_processing_word(lowercase=True)
# Generators
dev = NERDataset(config.filename_dev, processing_word)
test = NERDataset(config.filename_test, processing_word)
train = NERDataset(config.filename_train, processing_word)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
vocab_tags.add(UNK)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim Word Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = NERDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True) # 把字符全部小写，数字替换成NUM
# Generators
to_be_add = CoNLLDataset1(config.filename_test,
processing_word) # 返回一句话（words），和标签tags
# Build Word and Tag vocab
vocab_words, _ = get_vocabs([to_be_add])
vocab_glove = get_glove_vocab(config.filename_glove) # glove词表
words_have_vec = vocab_words & vocab_glove
vocab_words_and_entity = entity2vocab(datasets=[to_be_add],
vocab=words_have_vec)
vocab_in_file = set(load_vocab(config.filename_words))
vocab_words_to_be_add = vocab_words_and_entity - vocab_in_file
if len(vocab_words_to_be_add) != 0:
with open(config.filename_words, 'a') as f:
for i, vocab_word in enumerate(vocab_words_to_be_add):
f.write('\n{}'.format(vocab_word))
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words) # 得到dict类型的vocab：{word:index}
# 针对vocab，生成numpy的embedding文件，包含一个矩阵，对应词嵌入
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
# Generators
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
# get config and processing of words
config = Config(load=False)
# or ontonotes-nw if you like
assert sys.argv[1] in datasets, "the source argument should be in {c/o/r/w}"
source_dataset = sys.argv[1]
source_vocab_words, source_vocab_tags = get_vocabs_from_dataset(source_dataset)
print("Source word vocab size:", len(source_vocab_words))
assert sys.argv[2] in datasets, "the target argument should be in {c/o/r/w}"
target_dataset = sys.argv[2]
target_vocab_words, _ = get_vocabs_from_dataset(target_dataset)
print("Target word vocab size:", len(target_vocab_words))
# Build Word and Tag vocab
config.filename_words = "../datasets/%s/words.txt"%datasets[source_dataset]
config.filename_tags = "../datasets/%s/tags.txt"%datasets[source_dataset]
config.filename_chars = "../datasets/%s/chars.txt"%datasets[source_dataset]
print("Source+Target word vocab size:", len((source_vocab_words | target_vocab_words)))
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = (source_vocab_words | target_vocab_words) & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
print("Final word vocab size:", len(vocab))
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(source_vocab_tags, config.filename_tags)
# Build and save char vocab
vocab_chars = get_char_vocab((source_vocab_words | target_vocab_words))
print("Final char vocab size:", len(vocab_chars))
write_vocab(vocab_chars, config.filename_chars)
# Trim Word Vectors
vocab = load_vocab(config.filename_words)
config.filename_trimmed = config.filename_trimmed.replace("dataset_name",datasets[source_dataset])
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
def main():
# get config and processing of words
config = Config(load=False)
# should be source_x.txt
# or ontonotes-nw if you like
config.filename_train = "../datasets/ontonotes-nw/train"
config.filename_dev = "../datasets/ontonotes-nw/dev"
config.filename_test = "../datasets/ontonotes-nw/test"
processing_word = get_processing_word(lowercase=True)
# Generators
dev = NERDataset(config.filename_dev, processing_word)
test = NERDataset(config.filename_test, processing_word)
train = NERDataset(config.filename_train, processing_word)
#for word, tag in train:
#print("word:{}".format(word))
#print ("tag:{}".format(tag))
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
vocab_tags.add(UNK)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim Word Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = NERDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
# Build word and tag vocabs
vocab_words, vocab_tags = CoNLLDataset(
[config.filename_dev, config.filename_train, config.filename_test],
processing_word(lowercase=True)).get_word_tag_vocabs()
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove | {UNK, NUM}
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
vocab_chars = CoNLLDataset(config.filename_train).get_char_vocab()
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
This procedure iterates over the SemEval dataset and builds a vocabulary
of words and tags, then writes them to a file. Each word is labelled by
an ID. The GloVe vectors of the words are then extracted and stored
in a numpy array. The word id is used to index into that numpy array.
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
# Generators for the dev, test and training files
dev = GloveDataset(config.filename_dev, processing_word)
test = GloveDataset(config.filename_test, processing_word)
train = GloveDataset(config.filename_train, processing_word)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
#find the intersection between the vocabs from the chosen dataset and GloVe
vocab = vocab_words & vocab_glove
#adds the unknown and numeric value to the vocab
vocab.add(UNK)
vocab.add(NUM)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# export the trimmed glove vectors in a compressed file.
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
logger = config.logger
#------------------------------------------------------------------
# Generators
# ------------------------------------------------------------------
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
sick = CoNLLDataset(config.filename_sick, processing_word)
# ------------------------------------------------------------------
# Build Word and Tag vocab
# ------------------------------------------------------------------
vocab_words, vocab_tags = get_vocabs([train, dev, test, sick])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# ------------------------------------------------------------------
# Save vocab
# ------------------------------------------------------------------
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# ------------------------------------------------------------------
# Trim GloVe Vectors
# ------------------------------------------------------------------
vocab, _ = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# ------------------------------------------------------------------
# Build and save char vocab
# ------------------------------------------------------------------
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
# ------------------------------------------------------------------
#split train files
# ------------------------------------------------------------------
logger.info('\n Splitting the train file into {} splits ...'.format(
config.num_splits))
split_train(config)
logger.info('Saved the train splits in {}'.format('ner/data/'))
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
dir_output = "./results/" + sys.argv[4] + "/"
config = Config(dir_output, load=False)
processing_word = get_processing_word(lowercase=True)
# Generators
#dev = CoNLLDataset(config.filename_dev, processing_word)
#test = CoNLLDataset(config.filename_test, processing_word)
#train = CoNLLDataset(config.filename_train, processing_word)
dev = CoNLLDataset(sys.argv[1], processing_word)
test = CoNLLDataset(sys.argv[2], processing_word)
train = CoNLLDataset(sys.argv[3], processing_word)
config.filename_dev = sys.argv[1]
config.filename_test = sys.argv[2]
config.filename_train = sys.argv[3]
config.filename_pred = sys.argv[2].replace(".txt", ".pred")
config.filename_words = "./data/words_" + sys.argv[4] + ".txt"
config.filename_chars = "./data/chars_" + sys.argv[4] + ".txt"
config.filename_tags = "./data/tags_" + sys.argv[4] + ".txt"
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
vocab.add(LG)
vocab.add(ENT)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
# create instance of config
config = Config()
#
# 1. Load previous vocab words
old_vocab = set()
with open(config.filename_words) as f:
for word in f:
#print(word)
old_vocab.add(word.strip())
print("Number of old vocabs = ", len(old_vocab))
# Load new vocab and check for words in new vocab that is not in old vocab
processing_word = get_processing_word(lowercase=True)
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
vocab_words, vocab_tags = get_vocabs([dev, test])
# Get vocab in new dataset that is not in old vocab
vocab_new = vocab_words - old_vocab
print("Number of new words: ", len(vocab_new))
# Get full glove vocab
vocab_glove = get_glove_vocab(config.filename_glove)
# Get vocab set for words in new vocab and in glove_vocab
vocab = vocab_new & vocab_glove
print("Final number of additions are: ", len(vocab))
# Load old model
model = BLSTMCRF(config)
model.build()
model.summary()
model.load_weights('./saves/less_words.h5')
embedding_weights = model.get_layer(name="word_embeddings").get_weights()[0]
print(embedding_weights.shape)
def create_embedding_dict(glove_dir, dim_size):
print("Creating embedding dictionary...")
embeddings_index = {}
f = open(glove_dir, encoding='utf-8')
for line in f:
values = line.split()
word = values[0]
coefs = np.asarray(values[1:], dtype='float32')
embeddings_index[word] = coefs
f.close()
print('Found %s word vectors.' % len(embeddings_index))
return embeddings_index
embeddings_index = create_embedding_dict(config.filename_glove, config.dim_word)
# Create new embedding size
embeddings = np.zeros([embedding_weights.shape[0]+len(vocab), embedding_weights.shape[1]])
# Load old vectors
for idx, vec in enumerate(embedding_weights):
embeddings[idx] = vec
# Load new vectors
pt = embedding_weights.shape[0]
for idx, word in enumerate(vocab):
embeddings[idx+pt] = embeddings_index.get(word)
print("Size of new embeddings: ", embeddings.shape)
# Save embeddings to npz
np.savez_compressed(config.filename_trimmed, embeddings=embeddings)
# Write new vocab file for new config
def append_vocab(vocab, filename):
"""Writes a vocab to a file
Writes one word per line.
Args:
vocab: iterable that yields word
filename: path to vocab file
Returns:
write a word per line
"""
print("Writing vocab...")
with open(filename, "a") as f:
f.write("\n")
for i, word in enumerate(vocab):
if i != len(vocab) - 1:
f.write("{}\n".format(word))
else:
f.write(word)
print("- done. {} tokens".format(len(vocab)))
append_vocab(vocab, config.filename_words)
# Build new model
config2 = Config()
model2 = BLSTMCRF(config2)
model2.build()
model2.summary()
layer_names = ["char_embeddings", "fw_char_lstm", "bw_char_lstm", "bidirectional", "crf"]
# Set other weights
for layer_name in layer_names:
if layer_name == "crf":
model2.get_layer(name="crf_2").set_weights(model.get_layer(name="crf_1").get_weights())
else:
model2.get_layer(name=layer_name).set_weights(model.get_layer(name=layer_name).get_weights())
# Set embedding weights
#model2.get_layer(name="word_embeddings").set_weights([embeddings])
model2.summary()
model2.save_weights('./saves/WEWWWWW.h5')
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
config = Config(load=False)
processing_word = get_processing_word(lowercase=True)
# Generators
dev = FKDataset(config.filename_dev, processing_word)
test1 = FKDataset(config.filename_test1, processing_word)
test2 = FKDataset(config.filename_test2, processing_word)
train = FKDataset(config.filename_train, processing_word)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test1,test2])
vocab_glove = get_glove_vocab(config.filename_glove)
#print ("Inside build data and prinitng vocab_tags")
vocab_tags_task1 =[]
vocab_tags_task2 =[]
for items in vocab_tags:
if "_dress" in items:
vocab_tags_task1.append(items)
if "_jean" in items:
vocab_tags_task2.append(items)
vocab_tags_task1.append('O')
vocab_tags_task2.append('O')
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = FKDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def generate_model_data(data_prefix=None):
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
# get config and processing of words
# loads PubMeda articles
config = Config(load=False)
print('Config')
processing_word = get_processing_word(lowercase=True)
print('Processing_word')
# Generators
if data_prefix:
cwd = os.getcwd()
config.filename_dev = os.path.join(
cwd, 'data',
data_prefix + '_' + os.path.basename(config.filename_dev))
config.filename_test = os.path.join(
cwd, 'data',
data_prefix + '_' + os.path.basename(config.filename_test))
config.filename_train = os.path.join(
cwd, 'data',
data_prefix + '_' + os.path.basename(config.filename_train))
if not os.path.isfile(config.filename_dev):
print('Preprocessing tokens and labels to generate input data files')
preprocess_data()
dev = CoNLLDataset(config.filename_dev, processing_word)
test = CoNLLDataset(config.filename_test, processing_word)
train = CoNLLDataset(config.filename_train, processing_word)
print('Loaded dev, test, train')
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
print('Loading vocab_words')
vocab_glove = get_glove_vocab(config.filename_glove)
vocab = vocab_words & vocab_glove
vocab.add(UNK)
vocab.add(NUM)
# Save vocab
write_vocab(vocab, config.filename_words)
write_vocab(vocab_tags, config.filename_tags)
# Trim GloVe Vectors
vocab = load_vocab(config.filename_words)
export_trimmed_glove_vectors(vocab, config.filename_glove,
config.filename_trimmed, config.dim_word)
# Build and save char vocab
train = CoNLLDataset(config.filename_train)
vocab_chars = get_char_vocab(train)
write_vocab(vocab_chars, config.filename_chars)
def main():
"""Procedure to build data
You MUST RUN this procedure. It iterates over the whole dataset (train,
dev and test) and extract the vocabularies in terms of words, tags, and
characters. Having built the vocabularies it writes them in a file. The
writing of vocabulary in a file assigns an id (the line #) to each word.
It then extract the relevant GloVe vectors and stores them in a np array
such that the i-th entry corresponds to the i-th word in the vocabulary.
Args:
config: (instance of Config) has attributes like hyper-params...
"""
parser = argparse.ArgumentParser()
parser.add_argument('--dataset', type=str, default='conll2003')
parser.add_argument('--train_lang', type=str, default='en')
parser.add_argument('--dev_lang', type=str, default='en')
parser.add_argument('--test_lang', type=str, default='en')
parser.add_argument('--src_glove',
type=str,
default='data/glove.42B.300d.txt')
parser.add_argument('--tgt_glove', type=str, default=None)
parser.add_argument('--emb_dim', type=int, default=300)
parser.add_argument('--trimmed_glove',
type=str,
default='glove_trimmed.npz')
#parser.add_argument('--init_char', type=str, default=0)
#parser.add_argument('--trimmed_char', type=str, default='char_trimmed.npz')
args = parser.parse_args()
# get config and processing of words
#config = Config(emb_dim=512, load=False, dataset='ner_nl_es', use_muse=True)
processing_word = get_processing_word(lowercase=True)
#src_lang = 'nl'
#tgt_lang = 'es'
data_dir = args.dataset
# Generators
dev = CoNLLDataset(os.path.join(data_dir, 'dev.txt'),
processing_word=processing_word,
lang=args.dev_lang)
test = CoNLLDataset(os.path.join(data_dir, 'test.txt'),
processing_word=processing_word,
lang=args.test_lang)
train = CoNLLDataset(os.path.join(data_dir, 'train.txt'),
processing_word=processing_word,
lang=args.train_lang)
# Build Word and Tag vocab
vocab_words, vocab_tags = get_vocabs([train, dev, test])
vocab_glove = get_glove_vocab(args.src_glove, lang=args.train_lang)
if args.tgt_glove:
vocab_glove_tgt = get_glove_vocab(args.tgt_glove, lang=args.test_lang)
vocab = vocab_words & (vocab_glove | vocab_glove_tgt)
else:
vocab = vocab_words & vocab_glove
#vocab = vocab_words
vocab.add(UNK)
vocab.add(NUM)
# Save vocab
write_vocab(vocab, os.path.join(data_dir, 'words.txt'))
write_vocab(vocab_tags, os.path.join(data_dir, 'tags.txt'))
# Trim GloVe Vectors
vocab = load_vocab(os.path.join(data_dir, 'words.txt'))
if args.tgt_glove:
gloves = {
args.train_lang: args.src_glove,
args.test_lang: args.tgt_glove
}
else:
gloves = {args.train_lang: args.src_glove}
export_trimmed_glove_vectors_multiple(
vocab, gloves, os.path.join(data_dir, args.trimmed_glove),
args.emb_dim)
# Build and save char vocab
train = CoNLLDataset(os.path.join(data_dir, 'train.txt'))
test = CoNLLDataset(os.path.join(data_dir, 'test.txt'))
dev = CoNLLDataset(os.path.join(data_dir, 'dev.txt'))
vocab_chars = get_char_vocab([train, test, dev])
write_vocab(vocab_chars, os.path.join(data_dir, 'chars.txt'))
