def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(self)
# this is the output
self._transformStack = transformStackClass(self)
# we're going to use this to know when to actually read the data
self._md5HexDigest = ''
# we now have a viewFrame in self._viewFrame
self._createViewFrame(
'Select a filename to load',
'2D Transform Stack file (*.2ts)|*.2ts|All files (*)|*',
objectDict=None)
# set up some defaults
self._config.filename = ''
self.config_to_logic()
# make sure these filter through from the bottom up
self.logic_to_config()
self.config_to_view()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(self)
# this is the output
self._transformStack = transformStackClass(self)
# we're going to use this to know when to actually read the data
self._md5HexDigest = ''
# we now have a viewFrame in self._viewFrame
self._createViewFrame(
'Select a filename to load',
'2D Transform Stack file (*.2ts)|*.2ts|All files (*)|*',
objectDict=None)
# set up some defaults
self._config.filename = ''
self.config_to_logic()
# make sure these filter through from the bottom up
self.logic_to_config()
self.config_to_view()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._writer = vtk.vtkXMLImageDataWriter()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'VTK Image Data (*.vti)|*.vti|All files (*)|*',
{'vtkXMLImageDataWriter': self._writer},
fileOpen=False)
module_utils.setup_vtk_object_progress(
self, self._writer,
'Writing VTK ImageData')
self._writer.SetDataModeToBinary()
# set up some defaults
self._config.filename = ''
self._module_manager.sync_module_logic_with_config(self)
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._writer = vtk.vtkStructuredPointsWriter()
module_utils.setup_vtk_object_progress(
self, self._writer, 'Writing vtk structured points data')
# we do this to save space - if you're going to be transporting files
# to other architectures, change this to ASCII
# we've set this back to ASCII. Seems the binary mode is screwed
# for some files and manages to produce corrupt files that segfault
# VTK on Windows.
self._writer.SetFileTypeToASCII()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'VTK data (*.vtk)|*.vtk|All files (*)|*',
{'vtkStructuredPointsWriter': self._writer},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._writer = vtk.vtkXMLPolyDataWriter()
module_utils.setup_vtk_object_progress(
self, self._writer,
'Writing VTK PolyData')
self._writer.SetDataModeToBinary()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'VTK PolyData (*.vtp)|*.vtp|All files (*)|*',
{'vtkXMLPolyDataWriter': self._writer},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._input = None
self._writer = None
self._writer_type = None
wildCardString = 'Meta Image all-in-one (*.mha)|*.mha|' \
'Meta Image separate header/data (*.mhd)|*.mhd|' \
'Analyze separate header/data (*.hdr)|*.hdr|' \
'NIfTI (*.nii)|*.nii|' \
'NIfTI compressed (*.nii.gz)|*.nii.gz|' \
'All files (*)|*'
# we now have a viewFrame in self._viewFrame
FilenameViewModuleMixin.__init__(self,
'Select a filename',
wildCardString,
{'Module (self)': self},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._input = None
self._writer = None
self._writer_type = None
wildCardString = 'Meta Image all-in-one (*.mha)|*.mha|' \
'Meta Image separate header/data (*.mhd)|*.mhd|' \
'Analyze separate header/data (*.hdr)|*.hdr|' \
'NIfTI (*.nii)|*.nii|' \
'NIfTI compressed (*.nii.gz)|*.nii.gz|' \
'All files (*)|*'
# we now have a viewFrame in self._viewFrame
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
wildCardString,
{'Module (self)': self},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
"""Constructor (initialiser) for the PD reader.
This is almost standard code for most of the modules making use of
the FilenameViewModuleMixin mixin.
"""
# call the constructor in the "base"
ModuleBase.__init__(self, module_manager)
# setup necessary VTK objects
self._reader = vtk.vtkOBJReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'Wavefront OBJ data (*.obj)|*.obj|All files (*)|*',
{'vtkOBJReader': self._reader})
module_utils.setup_vtk_object_progress(self, self._reader,
'Reading Wavefront OBJ data')
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._writer = vtk.vtkIVWriter()
# sorry about this, but the files get REALLY big if we write them
# in ASCII - I'll make this a gui option later.
#self._writer.SetFileTypeToBinary()
# following is the standard way of connecting up the devide progress
# callback to a VTK object; you should do this for all objects in
module_utils.setup_vtk_object_progress(
self, self._writer, 'Writing polydata to Inventor Viewer format')
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'InventorViewer data (*.iv)|*.iv|All files (*)|*',
{'vtkIVWriter': self._writer},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
"""Constructor (initialiser) for the PD reader.
This is almost standard code for most of the modules making use of
the FilenameViewModuleMixin mixin.
"""
# call the constructor in the "base"
ModuleBase.__init__(self, module_manager)
# setup necessary VTK objects
self._reader = vtk.vtkSTLReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self, 'Select a filename',
'STL data (*.stl)|*.stl|All files (*)|*',
{'vtkSTLReader': self._reader})
module_utils.setup_vtk_object_progress(self, self._reader,
'Reading STL data')
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._writer = vtk.vtkStructuredPointsWriter()
module_utils.setup_vtk_object_progress(
self, self._writer,
'Writing vtk structured points data')
# we do this to save space - if you're going to be transporting files
# to other architectures, change this to ASCII
# we've set this back to ASCII. Seems the binary mode is screwed
# for some files and manages to produce corrupt files that segfault
# VTK on Windows.
self._writer.SetFileTypeToASCII()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'VTK data (*.vtk)|*.vtk|All files (*)|*',
{'vtkStructuredPointsWriter': self._writer},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._writer = vtk.vtkPolyDataWriter()
# sorry about this, but the files get REALLY big if we write them
# in ASCII - I'll make this a gui option later.
self._writer.SetFileTypeToBinary()
module_utils.setup_vtk_object_progress(
self, self._writer,
'Writing VTK Polygonal data')
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'VTK data (*.vtk)|*.vtk|All files (*)|*',
{'vtkPolyDataWriter': self._writer},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self, "Select a filename", "MATLAB file (*.m)|*.m|All files (*)|*", {"Module (self)": self}, fileOpen=False
)
# set up some defaults
self._config.filename = ""
self._input_points = None
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'MATLAB file (*.m)|*.m|All files (*)|*',
{'Module (self)': self},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self._input_points = None
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'DeVIDE points (*.dvp)|*.dvp|All files (*)|*',
{'Module (self)': self},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self._input_points = None
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._reader = vtk.vtkStructuredPointsReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self, 'Select a filename',
'VTK data (*.vtk)|*.vtk|All files (*)|*',
{'vtkStructuredPointsReader': self._reader})
module_utils.setup_vtk_object_progress(
self, self._reader, 'Reading vtk structured points data')
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._reader = vtk.vtkXMLPolyDataReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self, 'Select a filename',
'VTK Poly Data (*.vtp)|*.vtp|All files (*)|*',
{'vtkXMLPolyDataReader': self._reader})
module_utils.setup_vtk_object_progress(self, self._reader,
'Reading VTK PolyData')
self._viewFrame = None
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._reader = vtk.vtkStructuredPointsReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'VTK data (*.vtk)|*.vtk|All files (*)|*',
{'vtkStructuredPointsReader': self._reader})
module_utils.setup_vtk_object_progress(
self, self._reader,
'Reading vtk structured points data')
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(self)
# this is the input
self._transformStack = None
# we now have a viewFrame in self._viewFrame
self._createViewFrame(
'Select a filename',
'2D Transform Stack file (*.2ts)|*.2ts|All files (*)|*',
objectDict=None)
# set up some defaults
self._config.filename = ''
self.configToLogic()
# make sure these filter through from the bottom up
self.logicToConfig()
self.configToView()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(self)
# this is the input
self._transformStack = None
# we now have a viewFrame in self._viewFrame
self._createViewFrame(
'Select a filename',
'2D Transform Stack file (*.2ts)|*.2ts|All files (*)|*',
objectDict=None)
# set up some defaults
self._config.filename = ''
self.configToLogic()
# make sure these filter through from the bottom up
self.logicToConfig()
self.configToView()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._reader = vtk.vtkPLYReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self, 'Select a filename',
'(Stanford) Polygon File Format (*.ply)|*.ply|All files (*)|*', {
'vtkPLYReader': self._reader,
'Module (self)': self
})
module_utils.setup_vtk_object_progress(self, self._reader,
'Reading PLY PolyData')
# set up some defaults
self._config.filename = ''
# there is no view yet...
self._module_manager.sync_module_logic_with_config(self)
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._triFilter = vtk.vtkTriangleFilter()
module_utils.setup_vtk_object_progress(self, self._triFilter,
'Converting to triangles')
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'brep files (*.brep)|*.brep|All files (*)|*', {
'Module (self)': self,
'vtkTriangleFilter': self._triFilter
},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._reader = vtk.vtkXMLPolyDataReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'VTK Poly Data (*.vtp)|*.vtp|All files (*)|*',
{'vtkXMLPolyDataReader': self._reader})
module_utils.setup_vtk_object_progress(
self, self._reader,
'Reading VTK PolyData')
self._viewFrame = None
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._triFilter = vtk.vtkTriangleFilter()
module_utils.setup_vtk_object_progress(
self, self._triFilter,
'Converting to triangles')
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'brep files (*.brep)|*.brep|All files (*)|*',
{'Module (self)' : self,
'vtkTriangleFilter': self._triFilter},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# need to make sure that we're all happy triangles and stuff
self._cleaner = vtk.vtkCleanPolyData()
self._tf = vtk.vtkTriangleFilter()
self._tf.SetInput(self._cleaner.GetOutput())
self._writer = vtk.vtkSTLWriter()
self._writer.SetInput(self._tf.GetOutput())
# sorry about this, but the files get REALLY big if we write them
# in ASCII - I'll make this a gui option later.
#self._writer.SetFileTypeToBinary()
# following is the standard way of connecting up the devide progress
# callback to a VTK object; you should do this for all objects in
mm = self._module_manager
for textobj in (('Cleaning data', self._cleaner),
('Converting to triangles', self._tf),
('Writing STL data', self._writer)):
module_utils.setup_vtk_object_progress(self, textobj[1],
textobj[0])
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'STL data (*.stl)|*.stl|All files (*)|*',
{'vtkSTLWriter': self._writer},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
self._reader = vtk.vtkPLYReader()
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'(Stanford) Polygon File Format (*.ply)|*.ply|All files (*)|*',
{'vtkPLYReader': self._reader,
'Module (self)' : self})
module_utils.setup_vtk_object_progress(
self, self._reader,
'Reading PLY PolyData')
# set up some defaults
self._config.filename = ''
# there is no view yet...
self._module_manager.sync_module_logic_with_config(self)
def __init__(self, module_manager):
# call parent constructor
ModuleBase.__init__(self, module_manager)
# need to make sure that we're all happy triangles and stuff
self._cleaner = vtk.vtkCleanPolyData()
self._tf = vtk.vtkTriangleFilter()
self._tf.SetInput(self._cleaner.GetOutput())
self._writer = vtk.vtkSTLWriter()
self._writer.SetInput(self._tf.GetOutput())
# sorry about this, but the files get REALLY big if we write them
# in ASCII - I'll make this a gui option later.
#self._writer.SetFileTypeToBinary()
# following is the standard way of connecting up the devide progress
# callback to a VTK object; you should do this for all objects in
mm = self._module_manager
for textobj in (('Cleaning data',
self._cleaner), ('Converting to triangles', self._tf),
('Writing STL data', self._writer)):
module_utils.setup_vtk_object_progress(self, textobj[1],
textobj[0])
# ctor for this specific mixin
FilenameViewModuleMixin.__init__(
self,
'Select a filename',
'STL data (*.stl)|*.stl|All files (*)|*',
{'vtkSTLWriter': self._writer},
fileOpen=False)
# set up some defaults
self._config.filename = ''
self.sync_module_logic_with_config()