Пример #1
0
def oneroll_trim_mode_init(x, y):
    """
    User enters ONE_ROLL_TRIM mode from ONE_ROLL_TRIM_NO_EDIT 
    """
    track = tlinewidgets.get_track(y)
    if track == None:
        return False

    if track_lock_check_and_user_info(track, oneroll_trim_mode_init,
                                      "one roll trim mode"):
        set_default_edit_mode()
        return False

    stop_looping()
    editorstate.edit_mode = editorstate.ONE_ROLL_TRIM

    movemodes.clear_selected_clips(
    )  # Entering trim edit mode clears selection
    updater.set_trim_mode_gui()

    # init mode
    press_frame = tlinewidgets.get_frame(x)
    trimmodes.set_exit_mode_func = set_default_edit_mode
    trimmodes.set_no_edit_mode_func = oneroll_trim_no_edit_init
    success = trimmodes.set_oneroll_mode(track, press_frame)
    return success
Пример #2
0
def _cover_blank_from_next(data, called_from_next_clip=False):
    clip, track, item_id, item_data = data
    if not called_from_next_clip:
        clip_index = movemodes.selected_range_out + 1
        blank_index = movemodes.selected_range_in
        if clip_index < 0: # we are not getting a legal clip index
            return
        cover_clip = track.clips[clip_index]
    else:
        clip_index = track.clips.index(clip) + 1
        blank_index = clip_index - 1
        cover_clip = track.clips[clip_index]
        
    # Check that clip covers blank area
    total_length = 0
    for i in range(movemodes.selected_range_in,  movemodes.selected_range_out + 1):
        total_length += track.clips[i].clip_length()
    if total_length > cover_clip.clip_in: # handle not long enough to cover blanks
        primary_txt = _("Next clip does not have enough material to cover blank area")
        secondary_txt = _("Requested edit can't be done.")
        dialogutils.info_message(primary_txt, secondary_txt, gui.editor_window.window)
        return 

    # Do edit
    movemodes.clear_selected_clips()
    data = {"track":track, "clip":cover_clip, "blank_index":blank_index}
    action = edit.trim_start_over_blanks(data)
    action.do_edit()
Пример #3
0
def slide_trim_mode_init(x, y):
    """
    User selects two roll mode
    """
    track = tlinewidgets.get_track(y)
    if track == None:
        return False

    if track_lock_check_and_user_info(track, tworoll_trim_mode_init,
                                      "two roll trim mode"):
        set_default_edit_mode()
        return False

    stop_looping()
    editorstate.edit_mode = editorstate.SLIDE_TRIM

    movemodes.clear_selected_clips(
    )  # Entering trim edit mode clears selection
    updater.set_trim_mode_gui()

    press_frame = tlinewidgets.get_frame(x)
    trimmodes.set_exit_mode_func = set_default_edit_mode
    trimmodes.set_no_edit_mode_func = slide_trim_no_edit_init
    success = trimmodes.set_slide_mode(track, press_frame)
    return success
Пример #4
0
def _cover_blank_from_prev(data):
    clip, track, item_id, item_data = data
    clip_index = movemodes.selected_range_in - 1
    if clip_index < 0:  # we're not getting legal clip index
        return
    cover_clip = track.clips[clip_index]

    # Check that clip covers blank area
    total_length = 0
    for i in range(movemodes.selected_range_in,
                   movemodes.selected_range_out + 1):
        total_length += track.clips[i].clip_length()
    clip_handle = cover_clip.get_length() - cover_clip.clip_out - 1
    if total_length > clip_handle:  # handle not long enough to cover blanks
        primary_txt = _(
            "Previous clip does not have enough material to cover blank area")
        secondary_txt = _("Requested edit can't be done.")
        dialogutils.info_message(primary_txt, secondary_txt,
                                 gui.editor_window.window)
        return

    # Do edit
    movemodes.clear_selected_clips()
    data = {"track": track, "clip": cover_clip, "clip_index": clip_index}
    action = edit.trim_end_over_blanks(data)
    action.do_edit()
Пример #5
0
def _cover_blank_from_next(data, called_from_next_clip=False):
    clip, track, item_id, item_data = data
    if not called_from_next_clip:
        clip_index = movemodes.selected_range_out + 1
        blank_index = movemodes.selected_range_in
        if clip_index < 0:  # we are not getting a legal clip index
            return
        cover_clip = track.clips[clip_index]
    else:
        clip_index = track.clips.index(clip) + 1
        blank_index = clip_index - 1
        cover_clip = track.clips[clip_index]

    # Check that clip covers blank area
    total_length = 0
    for i in range(movemodes.selected_range_in,
                   movemodes.selected_range_out + 1):
        total_length += track.clips[i].clip_length()
    if total_length > cover_clip.clip_in:  # handle not long enough to cover blanks
        primary_txt = _(
            "Next clip does not have enough material to cover blank area")
        secondary_txt = _("Requested edit can't be done.")
        dialogutils.info_message(primary_txt, secondary_txt,
                                 gui.editor_window.window)
        return

    # Do edit
    movemodes.clear_selected_clips()
    data = {"track": track, "clip": cover_clip, "blank_index": blank_index}
    action = edit.trim_start_over_blanks(data)
    action.do_edit()
Пример #6
0
def slide_trim_no_edit_init():
    stop_looping() # Stops looping 
    editorstate.edit_mode = editorstate.SLIDE_TRIM_NO_EDIT
    gui.editor_window.set_cursor_to_mode()
    tlinewidgets.set_edit_mode(None, None) # No overlays are drawn in this edit mode
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
    updater.set_trim_mode_gui()
Пример #7
0
def multitrim_mode_pressed():
    stop_looping()
    editorstate.edit_mode = editorstate.MULTI_TRIM
    tlinewidgets.set_edit_mode(None,
                               None)  # No overlays are drawn in this edit mode
    movemodes.clear_selected_clips(
    )  # Entering trim edit mode clears selection
    updater.set_trim_mode_gui()
Пример #8
0
def resync_everything():
    # Selection not valid after resync action
    if movemodes.selected_track == -1:
        movemodes.clear_selected_clips()

    action = edit.resync_all_action({})
    action.do_edit()

    updater.repaint_tline()
Пример #9
0
def cut_mode_pressed():
    stop_looping()
    current_sequence().clear_hidden_track()

    # Box tool is implemeted as sub mode of OVERWRITE_MOVE
    editorstate.edit_mode = editorstate.CUT
        
    tlinewidgets.set_edit_mode(None, tlinewidgets.draw_cut_overlay)
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
Пример #10
0
def _delete_blank(data):
    clip, track, item_id, x = data
    movemodes.select_blank_range(track, clip)
    from_index = movemodes.selected_range_in
    to_index = movemodes.selected_range_out
    movemodes.clear_selected_clips()
    data = {"track": track, "from_index": from_index, "to_index": to_index}
    action = edit.remove_multiple_action(data)
    action.do_edit()
Пример #11
0
def resync_everything():
    # Selection not valid after resync action
    if movemodes.selected_track == -1:
        movemodes.clear_selected_clips()
    
    action = edit.resync_all_action({})
    action.do_edit()
    
    updater.repaint_tline()
Пример #12
0
def three_point_overwrite_pressed():
    # Check that state is good for edit
    if movemodes.selected_track == -1:
        primary_txt = _("No Clips are selected!")
        secondary_txt = _(
            "You need to select clips to overwrite to perform this edit.")
        dialogutils.info_message(primary_txt, secondary_txt,
                                 gui.editor_window.window)
        return

    # Get data
    track = get_track(movemodes.selected_track)
    if editevent.track_lock_check_and_user_info(track,
                                                three_point_overwrite_pressed,
                                                "3 point overwrite"):
        return

    range_start_frame = track.clip_start(movemodes.selected_range_in)
    out_clip = track.clips[movemodes.selected_range_out]
    out_start = track.clip_start(movemodes.selected_range_out)
    range_end_frame = out_start + out_clip.clip_out - out_clip.clip_in
    range_length = range_end_frame - range_start_frame + 1  # calculated end is incl.

    over_clip = _get_new_clip_from_clip_monitor()
    if over_clip == None:
        no_monitor_clip_info(gui.editor_window.window)
        return
    over_length = over_clip.mark_out - over_clip.mark_in + 1  # + 1 out incl ?????????? what if over_clip.mark_out == -1  ??????????

    if over_length < range_length:
        monitor_clip_too_short(gui.editor_window.window)
        return

    over_clip_out = over_clip.mark_in + range_length - 1  # -1 out incl

    range_in = movemodes.selected_range_in
    range_out = movemodes.selected_range_out

    movemodes.clear_selected_clips()  # edit consumes selection

    updater.save_monitor_frame = False  # hack to not get wrong value saved in MediaFile.current_frame

    data = {
        "track": track,
        "clip": over_clip,
        "clip_in": over_clip.mark_in,
        "clip_out": over_clip_out,
        "in_index": range_in,
        "out_index": range_out
    }
    action = edit.three_point_overwrite_action(data)
    action.do_edit()

    if not editorstate.timeline_visible():
        updater.display_sequence_in_monitor()

    updater.display_tline_cut_frame(track, range_in)
Пример #13
0
def cut_mode_pressed():
    stop_looping()
    current_sequence().clear_hidden_track()

    # Box tool is implemeted as sub mode of OVERWRITE_MOVE
    editorstate.edit_mode = editorstate.CUT
        
    tlinewidgets.set_edit_mode(None, tlinewidgets.draw_cut_overlay)
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
Пример #14
0
def _delete_blank(data):
    clip, track, item_id, x = data
    movemodes.select_blank_range(track, clip)
    from_index = movemodes.selected_range_in
    to_index = movemodes.selected_range_out  
    movemodes.clear_selected_clips()
    data = {"track":track,"from_index":from_index,"to_index":to_index}
    action = edit.remove_multiple_action(data)
    action.do_edit()
Пример #15
0
def cut_pressed():
    if not timeline_visible():
        updater.display_sequence_in_monitor()

    if EDIT_MODE() == editorstate.ONE_ROLL_TRIM:
        editevent.oneroll_trim_no_edit_init()
        return

    if EDIT_MODE() == editorstate.TWO_ROLL_TRIM:
        editevent.tworoll_trim_no_edit_init()
        return

    tline_frame = PLAYER().current_frame()

    movemodes.clear_selected_clips()

    # Iterate tracks and do cut on all active that have non-blanck
    # clips and frame is not on previous edits
    for i in range(1, len(current_sequence().tracks)):
        track = get_track(i)
        if track.active == False:
            continue

        if editevent.track_lock_check_and_user_info(
                track, cut_pressed, "cut"):  # so the other tracks get cut...
            continue

        # Get index and clip
        index = track.get_clip_index_at(int(tline_frame))
        try:
            clip = track.clips[index]
            # don't cut blanck clip
            if clip.is_blanck_clip:
                continue
        except Exception:
            continue  # Frame after last clip in track

        # Get cut frame in clip frames
        clip_start_in_tline = track.clip_start(index)
        clip_frame = tline_frame - clip_start_in_tline + clip.clip_in

        # Dont edit if frame on cut.
        if clip_frame == clip.clip_in:
            continue

        # Do edit
        data = {
            "track": track,
            "index": index,
            "clip": clip,
            "clip_cut_frame": clip_frame
        }
        action = edit.cut_action(data)
        action.do_edit()

    updater.repaint_tline()
Пример #16
0
def clear_sync_relation(popup_data):
    clip, track, item_id, x = popup_data

    data = {"child_clip": clip, "child_track": track}
    action = edit.clear_sync_action(data)
    action.do_edit()

    # Edit consumes selection
    movemodes.clear_selected_clips()

    updater.repaint_tline()
Пример #17
0
def clear_sync_relation(popup_data):
    clip, track, item_id, x = popup_data

    data = {"child_clip": clip, "child_track": track}
    action = edit.clear_sync_action(data)
    action.do_edit()

    # Edit consumes selection
    movemodes.clear_selected_clips()

    updater.repaint_tline()
Пример #18
0
def kftool_mode_pressed():
    stop_looping()
    current_sequence().clear_hidden_track()

    # Box tool is implemeted as sub mode of OVERWRITE_MOVE
    editorstate.edit_mode = editorstate.KF_TOOL
    kftoolmode.enter_mode = None
    kftoolmode.set_no_clip_edit_data()

    tlinewidgets.set_edit_mode(None, tlinewidgets.draw_kftool_overlay)
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
Пример #19
0
def kftool_mode_pressed():
    stop_looping()
    current_sequence().clear_hidden_track()

    # Box tool is implemeted as sub mode of OVERWRITE_MOVE
    editorstate.edit_mode = editorstate.KF_TOOL
    kftoolmode.enter_mode = None
    kftoolmode.set_no_clip_edit_data()

    tlinewidgets.set_edit_mode(None, tlinewidgets.draw_kftool_overlay)
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
Пример #20
0
def cut_pressed():
    if not timeline_visible():
        updater.display_sequence_in_monitor()

    if EDIT_MODE() == editorstate.ONE_ROLL_TRIM:
        editevent.oneroll_trim_no_edit_init()
        return

    if EDIT_MODE() == editorstate.TWO_ROLL_TRIM:
        editevent.tworoll_trim_no_edit_init()
        return
        
    tline_frame = PLAYER().current_frame()

    movemodes.clear_selected_clips()

    # Iterate tracks and do cut on all active that have non-blanck
    # clips and frame is not on previous edits
    for i in range(1, len(current_sequence().tracks)):
        track = get_track(i)
        if track.active == False:
            continue
        
        if editevent.track_lock_check_and_user_info(track, cut_pressed, "cut"): # so the other tracks get cut...
           continue 

        # Get index and clip
        index = track.get_clip_index_at(int(tline_frame))
        try:
            clip = track.clips[index]            
            # don't cut blanck clip
            if clip.is_blanck_clip:
                continue
        except Exception:
            continue # Frame after last clip in track

        # Get cut frame in clip frames
        clip_start_in_tline = track.clip_start(index)
        clip_frame = tline_frame - clip_start_in_tline + clip.clip_in

        # Dont edit if frame on cut.
        if clip_frame == clip.clip_in:
            continue

        # Do edit
        data = {"track":track,
                "index":index,
                "clip":clip,
                "clip_cut_frame":clip_frame}
        action = edit.cut_action(data)
        action.do_edit()
   
    updater.repaint_tline()
Пример #21
0
def kftool_mode_from_popup_menu(clip, track):
    stop_looping()
    current_sequence().clear_hidden_track()

    # Box tool is implemeted as sub mode of OVERWRITE_MOVE
    editorstate.edit_mode = editorstate.KF_TOOL
        
    tlinewidgets.set_edit_mode(None, tlinewidgets.draw_kftool_overlay)
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 

    kftoolmode.init_tool_for_clip(clip, track)
    gui.editor_window.set_cursor_to_mode()
Пример #22
0
def resync_selected():
    if movemodes.selected_track == -1:
        return

    track = get_track(movemodes.selected_track)
    clip_list = []
    for index in range(movemodes.selected_range_in,
                       movemodes.selected_range_out + 1):
        clip_list.append((track.clips[index], track))

    # Selection not valid after resync action
    movemodes.clear_selected_clips()

    # Chack if synced clips have same or consecutive parent clips
    all_same_or_consecutive = True
    master_id = -1
    current_master_clip = -1
    current_master_index = -1
    master_track = current_sequence().first_video_track()
    for t in clip_list:
        clip, track = t
        try:
            if master_id == -1:
                master_id = clip.sync_data.master_clip.id
                current_master_clip = clip.sync_data.master_clip
                current_master_index = master_track.clips.index(
                    current_master_clip)
            else:
                if clip.sync_data.master_clip.id != master_id:
                    next_master_index = master_track.clips.index(
                        clip.sync_data.master_clip)
                    if current_master_index + 1 == next_master_index:
                        # Masters are consecutive, save data to test next
                        master_id = clip.sync_data.master_clip.id
                        current_master_index = master_track.clips.index(
                            current_master_clip)
                    else:
                        all_same_or_consecutive = False
        except:
            all_same_or_consecutive = False

    # If clips are all for same or consecutive sync parent clips, sync them as a unit.
    if len(clip_list) > 1 and all_same_or_consecutive == True:
        data = {"clips": clip_list}
        action = edit.resync_clips_sequence_action(data)
        action.do_edit()
    else:  # Single or non-consecutive clips are synched separately
        data = {"clips": clip_list}
        action = edit.resync_some_clips_action(data)
        action.do_edit()

    updater.repaint_tline()
Пример #23
0
def range_overwrite_pressed():
    # Get data
    track = current_sequence().get_first_active_track()
    if editevent.track_lock_check_and_user_info(track, range_overwrite_pressed,
                                                "range overwrite"):
        return

    # tractor is has mark in and mark
    mark_in_frame = current_sequence().tractor.mark_in
    mark_out_frame = current_sequence().tractor.mark_out
    range_length = mark_out_frame - mark_in_frame + 1  # end is incl.
    if mark_in_frame == -1 or mark_out_frame == -1:
        primary_txt = _("Timeline Range not set!")
        secondary_txt = _(
            "You need to set Timeline Range using Mark In and Mark Out buttons\nto perform this edit."
        )
        dialogutils.info_message(primary_txt, secondary_txt,
                                 gui.editor_window.window)
        return

    # Get over clip and check it overwrite range area
    over_clip = _get_new_clip_from_clip_monitor()
    if over_clip == None:
        no_monitor_clip_info(gui.editor_window.window)
        return

    over_length = over_clip.mark_out - over_clip.mark_in + 1  # + 1 out incl
    if over_length < range_length:
        monitor_clip_too_short(gui.editor_window.window)
        return

    over_clip_out = over_clip.mark_in + range_length - 1

    movemodes.clear_selected_clips()  # edit consumes selection

    updater.save_monitor_frame = False  # hack to not get wrong value saved in MediaFile.current_frame

    data = {
        "track": track,
        "clip": over_clip,
        "clip_in": over_clip.mark_in,
        "clip_out": over_clip_out,
        "mark_in_frame": mark_in_frame,
        "mark_out_frame": mark_out_frame + 1
    }  # +1 because mark is displayed and end of frame end this
    # confirms to user expectation of
    # of how this should work
    action = edit.range_overwrite_action(data)
    action.do_edit()

    updater.display_tline_cut_frame(track,
                                    track.get_clip_index_at(mark_in_frame))
Пример #24
0
def select_sync_parent_mouse_pressed(event, frame):
    _set_sync_parent_clip(event, frame)

    gdk_window = gui.tline_display.get_parent_window()
    gdk_window.set_cursor(Gdk.Cursor.new(Gdk.CursorType.LEFT_PTR))

    global parent_selection_data
    parent_selection_data = None

    # Edit consumes selection
    movemodes.clear_selected_clips()

    updater.repaint_tline()
Пример #25
0
def select_sync_parent_mouse_pressed(event, frame):
    _set_sync_parent_clip(event, frame)
    
    gdk_window = gui.tline_display.get_parent_window();
    gdk_window.set_cursor(gtk.gdk.Cursor(gtk.gdk.LEFT_PTR))
   
    global parent_selection_data
    parent_selection_data = None

    # Edit consumes selection
    movemodes.clear_selected_clips()

    updater.repaint_tline()
Пример #26
0
def oneroll_trim_no_edit_init():
    """
    This mode is entered and this method is called when:
    - user first selects trim tool
    - user does cut(X) action while in trim mode
    - user clicks empty and preference is to keep using trim tool (to not exit to INSERT_MOVE)
    """
    stop_looping()
    editorstate.edit_mode = editorstate.ONE_ROLL_TRIM_NO_EDIT
    gui.editor_window.set_cursor_to_mode()
    tlinewidgets.set_edit_mode(None, None) # No overlays are drawn in this edit mode
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
    updater.set_trim_mode_gui()
Пример #27
0
def kftool_mode_from_popup_menu(clip, track, edit_type):
    stop_looping()
    current_sequence().clear_hidden_track()

    kftoolmode.enter_mode = editorstate.edit_mode 
    editorstate.edit_mode = editorstate.KF_TOOL
        
    tlinewidgets.set_edit_mode(None, tlinewidgets.draw_kftool_overlay)
    movemodes.clear_selected_clips() # Entering this edit mode clears selection 

    kftoolmode.set_no_clip_edit_data()

    kftoolmode.init_tool_for_clip(clip, track, edit_type)
    gui.editor_window.set_cursor_to_mode()
Пример #28
0
def kftool_mode_from_popup_menu(clip, track, edit_type):
    stop_looping()
    current_sequence().clear_hidden_track()

    kftoolmode.enter_mode = editorstate.edit_mode 
    editorstate.edit_mode = editorstate.KF_TOOL
        
    tlinewidgets.set_edit_mode(None, tlinewidgets.draw_kftool_overlay)
    movemodes.clear_selected_clips() # Entering this edit mode clears selection 

    kftoolmode.set_no_clip_edit_data()

    kftoolmode.init_tool_for_clip(clip, track, edit_type)
    gui.editor_window.set_cursor_to_mode()
Пример #29
0
def clear_filters():
    if movemodes.selected_track == -1:
        return

    track = get_track(movemodes.selected_track)
    clips = []
    for i in range(movemodes.selected_range_in, movemodes.selected_range_out + 1):
        clips.append(track.clips[i])

    data = {"clips":clips}
    action = edit.remove_multiple_filters_action(data)
    action.do_edit()
    
    movemodes.clear_selected_clips()
    updater.repaint_tline()
Пример #30
0
def change_edit_sequence():
    selection = gui.sequence_list_view.treeview.get_selection()
    (model, rows) = selection.get_selected_rows()
    row = max(rows[0])
    current_index = PROJECT().sequences.index(current_sequence())
    if row == current_index:
        dialogutils.warning_message(_("Selected sequence is already being edited"), 
                                _("Select another sequence. Press Add -button to create a\nnew sequence if needed."),
                                gui.editor_window.window)
        return 
    # Clear clips selection at exit. This is transient user focus state and
    # therefore is not saved.
    movemodes.clear_selected_clips()
    
    app.change_current_sequence(row)
Пример #31
0
def clear_filters():
    if movemodes.selected_track == -1:
        return

    track = get_track(movemodes.selected_track)
    clips = []
    for i in range(movemodes.selected_range_in, movemodes.selected_range_out + 1):
        clips.append(track.clips[i])

    data = {"clips":clips}
    action = edit.remove_multiple_filters_action(data)
    action.do_edit()
    
    movemodes.clear_selected_clips()
    updater.repaint_tline()
Пример #32
0
def select_sync_clip_mouse_pressed(event, frame):
    sync_clip = _get_sync_tline_clip(event, frame)

    if sync_clip == None:
        return  # selection wasn't good

    if utils.is_mlt_xml_file(sync_clip.path) == True:
        # This isn't translated because 1.14 translation window is close, translation coming for 1.16
        dialogutils.warning_message(
            _("Cannot Timeline Audio Sync with MLT XML Container Clips!"),
            _("Audio syncing for MLT XML Container Clips is not supported."),
            gui.editor_window.window, True)
        return

    sync_track = tlinewidgets.get_track(event.y)
    sync_clip_index = sync_track.clips.index(sync_clip)

    _tline_sync_data.sync_clip = sync_clip
    _tline_sync_data.sync_track = sync_track
    _tline_sync_data.sync_clip_index = sync_clip_index

    # TImeline media offset for clips
    sync_clip_start_in_tline = sync_track.clip_start(sync_clip_index)
    _tline_sync_data.origin_clip_start_in_tline = _tline_sync_data.origin_track.clip_start(
        _tline_sync_data.origin_clip_index)

    _tline_sync_data.clip_tline_media_offset = (
        sync_clip_start_in_tline -
        sync_clip.clip_in) - (_tline_sync_data.origin_clip_start_in_tline -
                              _tline_sync_data.origin_clip.clip_in)

    gdk_window = gui.tline_display.get_parent_window()
    gdk_window.set_cursor(Gdk.Cursor.new(Gdk.CursorType.LEFT_PTR))

    global _compare_dialog_thread
    _compare_dialog_thread = AudioCompareActiveThread()
    _compare_dialog_thread.start()

    # This or GUI freezes, we really can't do Popen.wait() in a Gtk thread
    clapperless_thread = ClapperlesLaunchThread(
        _tline_sync_data.origin_clip.path, sync_clip.path,
        _tline_sync_offsets_computed_callback)
    clapperless_thread.start()

    # Edit consumes selection
    movemodes.clear_selected_clips()

    updater.repaint_tline()
Пример #33
0
def three_point_overwrite_pressed():
    # Check that state is good for edit
    if movemodes.selected_track == -1:
        primary_txt = _("No Clips are selected!")
        secondary_txt = _("You need to select clips to overwrite to perform this edit.")
        dialogutils.info_message(primary_txt, secondary_txt, gui.editor_window.window)
        return

    # Get data
    track = get_track(movemodes.selected_track)
    if editevent.track_lock_check_and_user_info(track, three_point_overwrite_pressed, "3 point overwrite"):
        return
    
    range_start_frame = track.clip_start(movemodes.selected_range_in)
    out_clip = track.clips[movemodes.selected_range_out]
    out_start = track.clip_start(movemodes.selected_range_out)
    range_end_frame = out_start + out_clip.clip_out - out_clip.clip_in
    range_length = range_end_frame - range_start_frame + 1 # calculated end is incl.

    over_clip = _get_new_clip_from_clip_monitor()
    if over_clip == None:
        no_monitor_clip_info(gui.editor_window.window)
        return
    over_length = over_clip.mark_out - over_clip.mark_in + 1 # + 1 out incl ?????????? what if over_clip.mark_out == -1  ?????????? 
    
    if over_length < range_length:
        monitor_clip_too_short(gui.editor_window.window)
        return
    
    over_clip_out = over_clip.mark_in + range_length - 1 # -1 out incl
    
    range_in = movemodes.selected_range_in
    range_out = movemodes.selected_range_out
    
    movemodes.clear_selected_clips() # edit consumes selection

    updater.save_monitor_frame = False # hack to not get wrong value saved in MediaFile.current_frame

    data = {"track":track,
            "clip":over_clip,
            "clip_in":over_clip.mark_in,
            "clip_out":over_clip_out,
            "in_index":range_in,
            "out_index":range_out}
    action = edit.three_point_overwrite_action(data)
    action.do_edit()

    updater.display_tline_cut_frame(track, range_in)
Пример #34
0
def resync_selected():
    if movemodes.selected_track == -1:
        return

    track = get_track(movemodes.selected_track)
    clip_list = []
    for index in range(movemodes.selected_range_in, movemodes.selected_range_out + 1):
        clip_list.append((track.clips[index], track))

    # Selection not valid after resync action
    movemodes.clear_selected_clips()

    # Chack if synced clips have same or consecutive parent clips
    all_same_or_consecutive = True
    master_id = -1
    current_master_clip = -1
    current_master_index = -1
    master_track = current_sequence().first_video_track()
    for t in clip_list:
        clip, track = t
        try:
            if master_id == -1:
                master_id = clip.sync_data.master_clip.id
                current_master_clip = clip.sync_data.master_clip
                current_master_index = master_track.clips.index(current_master_clip)
            else:
                if clip.sync_data.master_clip.id != master_id:
                    next_master_index = master_track.clips.index(clip.sync_data.master_clip)
                    if current_master_index + 1 == next_master_index:
                        # Masters are consecutive, save data to test next
                        master_id = clip.sync_data.master_clip.id
                        current_master_index = master_track.clips.index(current_master_clip)
                    else:
                        all_same_or_consecutive = False
        except:
            all_same_or_consecutive = False

    # If clips are all for same or consecutive sync parent clips, sync them as a unit.
    if len(clip_list) > 1 and all_same_or_consecutive == True:
        data = {"clips":clip_list}
        action = edit.resync_clips_sequence_action(data)
        action.do_edit()
    else: # Single or non-consecutive clips are synched separately
        data = {"clips":clip_list}
        action = edit.resync_some_clips_action(data)
        action.do_edit()

    updater.repaint_tline()
Пример #35
0
def do_multiple_clip_insert(track, clips, tline_pos):
    index = _get_insert_index(track, tline_pos)

    # Can't put audio media on video track
    for new_clip in clips:
        if (new_clip.media_type == appconsts.AUDIO) and (track.type == appconsts.VIDEO):
            _display_no_audio_on_video_msg(track)
            return

    movemodes.clear_selected_clips()

    # Do edit
    data = {"track": track, "clips": clips, "index": index}
    action = edit.insert_multiple_action(data)
    action.do_edit()

    updater.display_tline_cut_frame(track, index)
Пример #36
0
def range_overwrite_pressed():
    # Get data
    track = current_sequence().get_first_active_track()
    if editevent.track_lock_check_and_user_info(track, range_overwrite_pressed, "range overwrite"):
        return
    
    # tractor is has mark in and mark
    mark_in_frame = current_sequence().tractor.mark_in
    mark_out_frame = current_sequence().tractor.mark_out
    range_length = mark_out_frame - mark_in_frame + 1 # end is incl.
    if mark_in_frame == -1 or mark_out_frame == -1:
        primary_txt = _("Timeline Range not set!")
        secondary_txt = _("You need to set Timeline Range using Mark In and Mark Out buttons\nto perform this edit.")
        dialogutils.info_message(primary_txt, secondary_txt, gui.editor_window.window)
        return

    # Get over clip and check it overwrite range area
    over_clip = _get_new_clip_from_clip_monitor()
    if over_clip == None:
        no_monitor_clip_info(gui.editor_window.window)
        return

    over_length = over_clip.mark_out - over_clip.mark_in + 1 # + 1 out incl
    if over_length < range_length:
        monitor_clip_too_short(gui.editor_window.window)
        return

    over_clip_out = over_clip.mark_in + range_length - 1

    movemodes.clear_selected_clips() # edit consumes selection

    updater.save_monitor_frame = False # hack to not get wrong value saved in MediaFile.current_frame

    data = {"track":track,
            "clip":over_clip,
            "clip_in":over_clip.mark_in,
            "clip_out":over_clip_out,
            "mark_in_frame":mark_in_frame,
            "mark_out_frame":mark_out_frame + 1} # +1 because mark is displayed and end of frame end this 
                                                 # confirms to user expectation of
                                                 # of how this should work
    action = edit.range_overwrite_action(data)
    action.do_edit()

    updater.display_tline_cut_frame(track, track.get_clip_index_at(mark_in_frame))
Пример #37
0
def do_multiple_clip_insert(track, clips, tline_pos):
    index = _get_insert_index(track, tline_pos)

    # Can't put audio media on video track
    for new_clip in clips:
        if ((new_clip.media_type == appconsts.AUDIO)
                and (track.type == appconsts.VIDEO)):
            _display_no_audio_on_video_msg(track)
            return

    movemodes.clear_selected_clips()

    # Do edit
    data = {"track": track, "clips": clips, "index": index}
    action = edit.insert_multiple_action(data)
    action.do_edit()

    updater.display_tline_cut_frame(track, index)
Пример #38
0
def delete_range_button_pressed():
    # Get data
    #track = current_sequence().get_first_active_track()
    #if editevent.track_lock_check_and_user_info(track, range_overwrite_pressed, "range overwrite"):
    #    return
    tracks = []
    for i in range(1, len(current_sequence().tracks) - 1):
        track = current_sequence().tracks[i]
        if track.edit_freedom != appconsts.LOCKED:
            tracks.append(track)

    if len(tracks) == 0:
        # all tracks are locked!
        return

    # tractor is has mark in and mark
    mark_in_frame = current_sequence().tractor.mark_in
    mark_out_frame = current_sequence().tractor.mark_out
    range_length = mark_out_frame - mark_in_frame + 1  # end is incl.
    if mark_in_frame == -1 or mark_out_frame == -1:
        primary_txt = _("Timeline Range not set!")
        secondary_txt = _(
            "You need to set Timeline Range using Mark In and Mark Out buttons\nto perform this edit."
        )
        dialogutils.info_message(primary_txt, secondary_txt,
                                 gui.editor_window.window)
        return

    movemodes.clear_selected_clips()  # edit consumes selection

    updater.save_monitor_frame = False  # hack to not get wrong value saved in MediaFile.current_frame

    data = {
        "tracks": tracks,
        "mark_in_frame": mark_in_frame,
        "mark_out_frame": mark_out_frame + 1
    }  # +1 because mark is displayed and end of frame end this
    # confirms to user expectation of
    # of how this should work
    action = edit.range_delete_action(data)
    action.do_edit()

    PLAYER().seek_frame(mark_in_frame)
Пример #39
0
def tworoll_trim_mode_init(x, y):
    """
    User selects two roll mode
    """
    track = tlinewidgets.get_track(y)
    if track == None:
        return False

    stop_looping()
    editorstate.edit_mode = editorstate.TWO_ROLL_TRIM

    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
    updater.set_trim_mode_gui()

    press_frame = tlinewidgets.get_frame(x)
    trimmodes.set_exit_mode_func = set_default_edit_mode
    trimmodes.set_no_edit_mode_func = tworoll_trim_no_edit_init
    success = trimmodes.set_tworoll_mode(track, press_frame)
    return success
Пример #40
0
def slide_trim_mode_init(x, y):
    """
    User selects two roll mode
    """
    track = tlinewidgets.get_track(y)
    if track == None:
        return False

    stop_looping()
    editorstate.edit_mode = editorstate.SLIDE_TRIM

    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
    updater.set_trim_mode_gui()

    press_frame = tlinewidgets.get_frame(x)
    trimmodes.set_exit_mode_func = set_default_edit_mode
    trimmodes.set_no_edit_mode_func = slide_trim_no_edit_init
    success = trimmodes.set_slide_mode(track, press_frame)
    return success
Пример #41
0
def select_sync_clip_mouse_pressed(event, frame):
    sync_clip = _get_sync_tline_clip(event, frame)

    if sync_clip == None:
        return # selection wasn't good
    
    if utils.is_mlt_xml_file(sync_clip.path) == True:
        # This isn't translated because 1.14 translation window is close, translation coming for 1.16
        dialogutils.warning_message(_("Cannot Timeline Audio Sync with Compound Clips!"), 
                                    _("Audio syncing for Compound Clips is not supported."),
                                    gui.editor_window.window,
                                    True)
        return

    sync_track =  tlinewidgets.get_track(event.y)
    sync_clip_index = sync_track.clips.index(sync_clip)

    _tline_sync_data.sync_clip = sync_clip
    _tline_sync_data.sync_track = sync_track
    _tline_sync_data.sync_clip_index = sync_clip_index

    # TImeline media offset for clips
    sync_clip_start_in_tline = sync_track.clip_start(sync_clip_index)
    _tline_sync_data.origin_clip_start_in_tline = _tline_sync_data.origin_track.clip_start(_tline_sync_data.origin_clip_index)
    
    _tline_sync_data.clip_tline_media_offset = (sync_clip_start_in_tline - sync_clip.clip_in) - (_tline_sync_data.origin_clip_start_in_tline - _tline_sync_data.origin_clip.clip_in)
    
    gdk_window = gui.tline_display.get_parent_window();
    gdk_window.set_cursor(Gdk.Cursor.new(Gdk.CursorType.LEFT_PTR))
    
    global _compare_dialog_thread
    _compare_dialog_thread = AudioCompareActiveThread()
    _compare_dialog_thread.start()
    
    # This or GUI freezes, we really can't do Popen.wait() in a Gtk thread
    clapperless_thread = ClapperlesLaunchThread(_tline_sync_data.origin_clip.path, sync_clip.path, _tline_sync_offsets_computed_callback)
    clapperless_thread.start()

    # Edit consumes selection
    movemodes.clear_selected_clips()

    updater.repaint_tline()
Пример #42
0
def oneroll_trim_mode_init(x, y):
    """
    User enters ONE_ROLL_TRIM mode from ONE_ROLL_TRIM_NO_EDIT 
    """
    track = tlinewidgets.get_track(y)
    if track == None:
        return False

    stop_looping() 
    editorstate.edit_mode = editorstate.ONE_ROLL_TRIM

    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
    updater.set_trim_mode_gui()

    # init mode
    press_frame = tlinewidgets.get_frame(x)
    trimmodes.set_exit_mode_func = set_default_edit_mode
    trimmodes.set_no_edit_mode_func = oneroll_trim_no_edit_init
    success = trimmodes.set_oneroll_mode(track, press_frame)
    return success
Пример #43
0
def do_clip_insert(track, new_clip, tline_pos):
    index = _get_insert_index(track, tline_pos)

    # Can't put audio media on video track 
    if ((new_clip.media_type == appconsts.AUDIO)
       and (track.type == appconsts.VIDEO)):        
        _display_no_audio_on_video_msg(track)
        return

    movemodes.clear_selected_clips()
    
    # Do edit
    data = {"track":track,
            "clip":new_clip,
            "index":index,
            "clip_in":new_clip.mark_in,
            "clip_out":new_clip.mark_out}
    action = edit.insert_action(data)
    action.do_edit()
    
    updater.display_tline_cut_frame(track, index)
Пример #44
0
def tworoll_trim_mode_init(x, y):
    """
    User selects two roll mode
    """
    track = tlinewidgets.get_track(y)
    if track == None:
        return False
    
    if track_lock_check_and_user_info(track, tworoll_trim_mode_init, "two roll trim mode",):
        set_default_edit_mode()
        return False

    stop_looping()
    editorstate.edit_mode = editorstate.TWO_ROLL_TRIM

    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
    updater.set_trim_mode_gui()

    press_frame = tlinewidgets.get_frame(x)
    trimmodes.set_exit_mode_func = set_default_edit_mode
    trimmodes.set_no_edit_mode_func = tworoll_trim_no_edit_init
    success = trimmodes.set_tworoll_mode(track, press_frame)
    return success
Пример #45
0
def _cover_blank_from_prev(data):
    clip, track, item_id, item_data = data
    clip_index = movemodes.selected_range_in - 1
    if clip_index < 0: # we're not getting legal clip index
        return 
    cover_clip = track.clips[clip_index]

    # Check that clip covers blank area
    total_length = 0
    for i in range(movemodes.selected_range_in,  movemodes.selected_range_out + 1):
        total_length += track.clips[i].clip_length()
    clip_handle = cover_clip.get_length() - cover_clip.clip_out - 1
    if total_length > clip_handle: # handle not long enough to cover blanks
        primary_txt = _("Previous clip does not have enough material to cover blank area")
        secondary_txt = _("Requested edit can't be done.")
        dialogutils.info_message(primary_txt, secondary_txt, gui.editor_window.window)
        return
    
    # Do edit
    movemodes.clear_selected_clips()
    data = {"track":track, "clip":cover_clip, "clip_index":clip_index}
    action = edit.trim_end_over_blanks(data)
    action.do_edit()
Пример #46
0
def select_sync_clip_mouse_pressed(event, frame):
    sync_clip = _get_sync_tline_clip(event, frame)

    if sync_clip == None:
        return  # selection wasn't good

    sync_track = tlinewidgets.get_track(event.y)
    sync_clip_index = sync_track.clips.index(sync_clip)

    _tline_sync_data.sync_clip = sync_clip
    _tline_sync_data.sync_track = sync_track
    _tline_sync_data.sync_clip_index = sync_clip_index

    # TImeline media offset for clips
    sync_clip_start_in_tline = sync_track.clip_start(sync_clip_index)
    _tline_sync_data.origin_clip_start_in_tline = _tline_sync_data.origin_track.clip_start(
        _tline_sync_data.origin_clip_index)

    _tline_sync_data.clip_tline_media_offset = (
        sync_clip_start_in_tline -
        sync_clip.clip_in) - (_tline_sync_data.origin_clip_start_in_tline -
                              _tline_sync_data.origin_clip.clip_in)

    gdk_window = gui.tline_display.get_parent_window()
    gdk_window.set_cursor(Gdk.Cursor.new(Gdk.CursorType.LEFT_PTR))

    # This or GUI freezes, we really can't do Popen.wait() in a Gtk thread
    clapperless_thread = ClapperlesLaunchThread(
        _tline_sync_data.origin_clip.path, sync_clip.path,
        _tline_sync_offsets_computed_callback)
    clapperless_thread.start()

    # Edit consumes selection
    movemodes.clear_selected_clips()

    updater.repaint_tline()
Пример #47
0
def tline_canvas_mouse_pressed(event, frame):
    """
    Mouse event callback from timeline canvas widget
    """
    editorstate.timeline_mouse_disabled = False # This is used to disable "move and "release" events when they would get bad data.
    
    if PLAYER().looping():
        return
    elif PLAYER().is_playing():
        PLAYER().stop_playback()
    
    # Double click handled separately
    if event.type == Gdk.EventType._2BUTTON_PRESS:
        return

    # Handle and exit parent clip selecting
    if EDIT_MODE() == editorstate.SELECT_PARENT_CLIP:
        syncsplitevent.select_sync_parent_mouse_pressed(event, frame)
        editorstate.timeline_mouse_disabled = True
        # Set INSERT_MODE
        modesetting.set_default_edit_mode()  
        return

    # Handle and exit tline sync clip selecting
    if EDIT_MODE() == editorstate.SELECT_TLINE_SYNC_CLIP:
        audiosync.select_sync_clip_mouse_pressed(event, frame)
        editorstate.timeline_mouse_disabled = True
        # Set INSERT_MODE
        modesetting.set_default_edit_mode()
        return
        
    # Hitting timeline in clip display mode displays timeline in
    # default mode.
    if not timeline_visible():
        updater.display_sequence_in_monitor()
        if (event.button == 1):
            # Now that we have correct edit mode we'll reenter
            # this method to get e.g. a select action
            tline_canvas_mouse_pressed(event, frame)
            return
        if (event.button == 3):
            # Right mouse + CTRL displays clip menu if we hit clip
            if (event.get_state() & Gdk.ModifierType.CONTROL_MASK):
                PLAYER().seek_frame(frame)
            # Right mouse on timeline seeks frame
            else:
                success = display_clip_menu_pop_up(event.y, event, frame)
                if not success:
                    PLAYER().seek_frame(frame)
        return

    # If clip end drag mode is for some reason still active, exit to default edit mode
    if EDIT_MODE() == editorstate.CLIP_END_DRAG:
        modesetting.set_default_edit_mode()
        # This shouldn't happen unless for some reason mouse release didn't hit clipenddragmode listener.
        print("EDIT_MODE() == editorstate.CLIP_END_DRAG at mouse press!")

    #  Check if match frame close is hit
    if editorstate.current_is_move_mode() and timeline_visible():
        if tlinewidgets.match_frame_close_hit(event.x, event.y) == True:
            tlinewidgets.set_match_frame(-1, -1, True)
            updater.repaint_tline()
            return

    #  Check if compositor is hit and if so, handle compositor editing
    if editorstate.current_is_move_mode() and timeline_visible():
        hit_compositor = tlinewidgets.compositor_hit(frame, event.x, event.y, current_sequence().compositors)
        if hit_compositor != None:
            if editorstate.get_compositing_mode() == appconsts.COMPOSITING_MODE_STANDARD_AUTO_FOLLOW:
                compositeeditor.set_compositor(hit_compositor)
                compositormodes.set_compositor_selected(hit_compositor)
                movemodes.clear_selected_clips()
                editorstate.timeline_mouse_disabled = True
                return
            elif editorstate.auto_follow_active() == False or hit_compositor.obey_autofollow == False:
                movemodes.clear_selected_clips()
                if event.button == 1 or (event.button == 3 and event.get_state() & Gdk.ModifierType.CONTROL_MASK):
                    compositormodes.set_compositor_mode(hit_compositor)
                    mode_funcs = EDIT_MODE_FUNCS[editorstate.COMPOSITOR_EDIT]
                    press_func = mode_funcs[TL_MOUSE_PRESS]
                    press_func(event, frame)
                    return
            if event.button == 3:
                compositormodes.set_compositor_selected(hit_compositor)
                guicomponents.display_compositor_popup_menu(event, hit_compositor,
                                                            compositor_menu_item_activated)
                return
            elif event.button == 2:
                updater.zoom_project_length()
                return

    compositormodes.clear_compositor_selection()

    # Check if we should enter clip end drag mode
    if (event.button == 3 and editorstate.current_is_move_mode()
        and timeline_visible() and (event.get_state() & Gdk.ModifierType.CONTROL_MASK)):
        # with CTRL right mouse
        clipenddragmode.maybe_init_for_mouse_press(event, frame)
    elif (timeline_visible() and (EDIT_MODE() == editorstate.INSERT_MOVE or EDIT_MODE() == editorstate.OVERWRITE_MOVE)
        and (tlinewidgets.pointer_context == appconsts.POINTER_CONTEXT_END_DRAG_LEFT or tlinewidgets.pointer_context == appconsts.POINTER_CONTEXT_END_DRAG_RIGHT)):
        # with pointer context
        clipenddragmode.maybe_init_for_mouse_press(event, frame)

    # Handle mouse button presses depending which button was pressed and
    # editor state.
    # RIGHT BUTTON: seek frame or display clip menu if not dragging clip end
    if (event.button == 3 and EDIT_MODE() != editorstate.CLIP_END_DRAG and EDIT_MODE() != editorstate.KF_TOOL):
        if ((not editorstate.current_is_active_trim_mode()) and timeline_visible()):
            if not(event.get_state() & Gdk.ModifierType.CONTROL_MASK):
                success = display_clip_menu_pop_up(event.y, event, frame)
                if not success:
                    PLAYER().seek_frame(frame)
        else:
            # For trim modes set <X>_NO_EDIT edit mode and seek frame. and seek frame
            trimmodes.set_no_edit_trim_mode()
            PLAYER().seek_frame(frame)
        return
    # LEFT BUTTON: Select new trimmed clip in active one roll trim mode	with sensitive cursor.
    elif (event.button == 1 and EDIT_MODE() == editorstate.ONE_ROLL_TRIM):	
        track = tlinewidgets.get_track(event.y)	
        if track == None:	
            modesetting.set_default_edit_mode(True)	
            return	
        success = trimmodes.set_oneroll_mode(track, frame)	
        if not success:
            modesetting.set_default_edit_mode(True)	
            return	
            	
        if trimmodes.edit_data["to_side_being_edited"] == True:	
            pointer_context = appconsts.POINTER_CONTEXT_TRIM_LEFT	
        else:	
            pointer_context = appconsts.POINTER_CONTEXT_TRIM_RIGHT	
        gui.editor_window.set_tline_cursor_to_context(pointer_context)	
        gui.editor_window.set_tool_selector_to_mode()	
        if not editorpersistance.prefs.quick_enter_trims:	
            editorstate.timeline_mouse_disabled = True	
        else:	
            trimmodes.oneroll_trim_move(event.x, event.y, frame, None)
    elif event.button == 2:
        updater.zoom_project_length()
    # LEFT BUTTON: Handle left mouse button edits by passing event to current edit mode
    # handler func
    elif event.button == 1 or event.button == 3:
        mode_funcs = EDIT_MODE_FUNCS[EDIT_MODE()]
        press_func = mode_funcs[TL_MOUSE_PRESS]
        press_func(event, frame)
Пример #48
0
def  _attempt_dnd_overwrite(track, clip, frame):
    # Can't put audio media on video track 
    if ((clip.media_type == appconsts.AUDIO)
       and (track.type == appconsts.VIDEO)):        
        return

    # Dropping on first available frame after last clip is append 
    # and is handled by insert code
    if track.get_length() == frame:
        return False

    # Clip dropped after last clip on track
    if track.get_length() < frame:
        index = _get_insert_index(track, track.get_length())

        movemodes.clear_selected_clips()
    
        data = {"track":track,
                "clip":clip,
                "blank_length":frame - track.get_length(),
                "index":index,
                "clip_in":clip.mark_in,
                "clip_out":clip.mark_out}
        action = edit.dnd_after_track_end_action(data)
        action.do_edit()

        updater.display_tline_cut_frame(track, index + 1)
        return True
    else: # Clip dropped before end of last clip on track
        index = track.get_clip_index_at(frame)
        overwritten_clip = track.clips[index]
        
        # dnd overwrites can only done on blank clips
        # Drops on clips are considered inserts
        if overwritten_clip.is_blanck_clip == False:
            return False

        drop_length = clip.mark_out - clip.mark_in + 1 # +1 , mark out incl.
        blank_start = track.clip_start(index)
        blank_end = track.clip_start(index + 1)
        
        movemodes.clear_selected_clips()
  
        # Clip dropped on first frame of blank
        if blank_start == frame:
            # If dropped clip longer then blank, replace blank
            if frame + drop_length >= blank_end:
                data = {"track":track,
                        "clip":clip,
                        "blank_length":blank_end - blank_start,
                        "index":index,
                        "clip_in":clip.mark_in}
                action = edit.dnd_on_blank_replace_action(data)
                action.do_edit()
            else: # If dropped clip shorter then blank, replace start part of blank
                data = {"track":track,
                        "clip":clip,
                        "blank_length":blank_end - blank_start,
                        "index":index,
                        "clip_in":clip.mark_in,
                        "clip_out":clip.mark_out}
                action = edit.dnd_on_blank_start_action(data)
                action.do_edit()

            updater.display_tline_cut_frame(track, index)
            return True

        # Clip dropped after first frame of blank        
        if frame + drop_length >= blank_end:
            # Overwrite end half of blank
            data = {"track":track,
                    "clip":clip,
                    "overwritten_blank_length":frame - blank_start,
                    "blank_length":blank_end - blank_start,
                    "index":index,
                    "clip_in":clip.mark_in,
                    "clip_out":clip.mark_out}
            action = edit.dnd_on_blank_end_action(data)
            action.do_edit()
        else: # Overwrite part of blank ei toimi
            data = {"track":track,
                    "clip":clip,
                    "overwritten_start_frame":frame - blank_start,
                    "blank_length":blank_end - blank_start,
                    "index":index,
                    "clip_in":clip.mark_in,
                    "clip_out":clip.mark_out}
            action = edit.dnd_on_blank_middle_action(data)
            action.do_edit()
            
        updater.display_tline_cut_frame(track, index + 1)
        return True

    return False # this won't be hit
Пример #49
0
def multitrim_mode_pressed():
    stop_looping()
    editorstate.edit_mode = editorstate.MULTI_TRIM
    tlinewidgets.set_edit_mode(None, None) # No overlays are drawn in this edit mode
    movemodes.clear_selected_clips() # Entering trim edit mode clears selection 
    updater.set_trim_mode_gui()
Пример #50
0
                                 transition_data["from_handle"], 
                                 to_part - (1 - add_thingy), 
                                 transition_data["to_handle"]) == False:
        return
    
    # Get from in and out frames
    from_in = from_clip.clip_out - from_part + add_thingy
    from_out = from_in + length # or transition will include one frame too many
    
    # Get to in and out frames
    to_in = to_clip.clip_in - to_part - 1 
    to_out = to_in + length # or transition will include one frame too many

    # Edit clears selection, get track index before selection is cleared
    trans_index = movemodes.selected_range_out
    movemodes.clear_selected_clips()

    producer_tractor = mlttransitions.get_rendered_transition_tractor(  editorstate.current_sequence(),
                                                                        from_clip,
                                                                        to_clip,
                                                                        from_out,
                                                                        from_in,
                                                                        to_out,
                                                                        to_in,
                                                                        transition_type_selection_index,
                                                                        sorted_wipe_luma_index,
                                                                        color_str)

    # Save transition data into global variable to be available at render complete callback
    global transition_render_data
    transition_render_data = (trans_index, from_clip, to_clip,  transition_data["track"], from_in, to_out, transition_type_selection_index)
Пример #51
0
def  _attempt_dnd_overwrite(track, clip, frame):
    # Can't put audio media on video track 
    if ((clip.media_type == appconsts.AUDIO)
       and (track.type == appconsts.VIDEO)):        
        return

    # Dropping on first available frame after last clip is append 
    # and is handled by insert code
    if track.get_length() == frame:
        return False

    # Clip dropped after last clip on track
    if track.get_length() < frame:
        index = _get_insert_index(track, track.get_length())

        movemodes.clear_selected_clips()
    
        data = {"track":track,
                "clip":clip,
                "blank_length":frame - track.get_length(),
                "index":index,
                "clip_in":clip.mark_in,
                "clip_out":clip.mark_out}
        action = edit.dnd_after_track_end_action(data)
        action.do_edit()

        updater.display_tline_cut_frame(track, index + 1)
        return True
    else: # Clip dropped before end of last clip on track
        index = track.get_clip_index_at(frame)
        overwritten_clip = track.clips[index]
        
        # dnd overwrites can only done on blank clips
        # Drops on clips are considered inserts
        if overwritten_clip.is_blanck_clip == False:
            return False

        drop_length = clip.mark_out - clip.mark_in + 1 # +1 , mark out incl.
        blank_start = track.clip_start(index)
        blank_end = track.clip_start(index + 1)
        
        movemodes.clear_selected_clips()
  
        # Clip dropped on first frame of blank
        if blank_start == frame:
            # If dropped clip longer then blank, replace blank
            if frame + drop_length >= blank_end:
                data = {"track":track,
                        "clip":clip,
                        "blank_length":blank_end - blank_start,
                        "index":index,
                        "clip_in":clip.mark_in}
                action = edit.dnd_on_blank_replace_action(data)
                action.do_edit()
            else: # If dropped clip shorter then blank, replace start part of blank
                data = {"track":track,
                        "clip":clip,
                        "blank_length":blank_end - blank_start,
                        "index":index,
                        "clip_in":clip.mark_in,
                        "clip_out":clip.mark_out}
                action = edit.dnd_on_blank_start_action(data)
                action.do_edit()

            updater.display_tline_cut_frame(track, index)
            return True

        # Clip dropped after first frame of blank        
        if frame + drop_length >= blank_end:
            # Overwrite end half of blank
            data = {"track":track,
                    "clip":clip,
                    "overwritten_blank_length":frame - blank_start,
                    "blank_length":blank_end - blank_start,
                    "index":index,
                    "clip_in":clip.mark_in,
                    "clip_out":clip.mark_out}
            action = edit.dnd_on_blank_end_action(data)
            action.do_edit()
        else: # Overwrite part of blank ei toimi
            data = {"track":track,
                    "clip":clip,
                    "overwritten_start_frame":frame - blank_start,
                    "blank_length":blank_end - blank_start,
                    "index":index,
                    "clip_in":clip.mark_in,
                    "clip_out":clip.mark_out}
            action = edit.dnd_on_blank_middle_action(data)
            action.do_edit()
            
        updater.display_tline_cut_frame(track, index + 1)
        return True

    return False # this won't be hit
Пример #52
0
def tline_canvas_mouse_pressed(event, frame):
    """
    Mouse event callback from timeline canvas widget
    """
    editorstate.timeline_mouse_disabled = False # This is used to disable "move and "release" events when they would get bad data.
    
    if PLAYER().looping():
        return
    elif PLAYER().is_playing():
        PLAYER().stop_playback()
    
    # Double click handled separately
    if event.type == Gdk.EventType._2BUTTON_PRESS:
        return

    # Handle and exit parent clip selecting
    if EDIT_MODE() == editorstate.SELECT_PARENT_CLIP:
        syncsplitevent.select_sync_parent_mouse_pressed(event, frame)
        editorstate.timeline_mouse_disabled = True
        # Set INSERT_MODE
        modesetting.set_default_edit_mode()  
        return

    # Handle and exit tline sync clip selecting
    if EDIT_MODE() == editorstate.SELECT_TLINE_SYNC_CLIP:
        audiosync.select_sync_clip_mouse_pressed(event, frame)
        editorstate.timeline_mouse_disabled = True
        # Set INSERT_MODE
        modesetting.set_default_edit_mode()
        return
        
    # Hitting timeline in clip display mode displays timeline in
    # default mode.
    if not timeline_visible():
        updater.display_sequence_in_monitor()
        if (event.button == 1):
            # Now that we have correct edit mode we'll reenter
            # this method to get e.g. a select action
            tline_canvas_mouse_pressed(event, frame)
            return
        if (event.button == 3):
            # Right mouse + CTRL displays clip menu if we hit clip
            if (event.get_state() & Gdk.ModifierType.CONTROL_MASK):
                PLAYER().seek_frame(frame)
            # Right mouse on timeline seeks frame
            else:
                success = display_clip_menu_pop_up(event.y, event, frame)
                if not success:
                    PLAYER().seek_frame(frame)
        return

    # If clip end drag mode is for some reason still active, exit to default edit mode
    if EDIT_MODE() == editorstate.CLIP_END_DRAG:
        modesetting.set_default_edit_mode()
        # This shouldn't happen unless for some reason mouse release didn't hit clipenddragmode listener.
        print "EDIT_MODE() == editorstate.CLIP_END_DRAG at mouse press!"

    #  Check if match frame close is hit
    if editorstate.current_is_move_mode() and timeline_visible():
        if tlinewidgets.match_frame_close_hit(event.x, event.y) == True:
            tlinewidgets.set_match_frame(-1, -1, True)
            updater.repaint_tline()
            return

    #  Check if compositor is hit and if so, handle compositor editing
    if editorstate.current_is_move_mode() and timeline_visible():
        hit_compositor = tlinewidgets.compositor_hit(frame, event.y, current_sequence().compositors)
        if hit_compositor != None:         
            if editorstate.auto_follow == False or hit_compositor.obey_autofollow == False:
                movemodes.clear_selected_clips()
                if event.button == 1 or (event.button == 3 and event.get_state() & Gdk.ModifierType.CONTROL_MASK):
                    compositormodes.set_compositor_mode(hit_compositor)
                    mode_funcs = EDIT_MODE_FUNCS[editorstate.COMPOSITOR_EDIT]
                    press_func = mode_funcs[TL_MOUSE_PRESS]
                    press_func(event, frame)
                    return
            if event.button == 3:
                compositormodes.set_compositor_selected(hit_compositor)
                guicomponents.display_compositor_popup_menu(event, hit_compositor,
                                                            compositor_menu_item_activated)
                return
            elif event.button == 2:
                updater.zoom_project_length()
                return

    compositormodes.clear_compositor_selection()

    # Check if we should enter clip end drag mode
    if (event.button == 3 and editorstate.current_is_move_mode()
        and timeline_visible() and (event.get_state() & Gdk.ModifierType.CONTROL_MASK)):
        # with CTRL right mouse
        clipenddragmode.maybe_init_for_mouse_press(event, frame)
    elif (timeline_visible() and (EDIT_MODE() == editorstate.INSERT_MOVE or EDIT_MODE() == editorstate.OVERWRITE_MOVE)
        and (tlinewidgets.pointer_context == appconsts.POINTER_CONTEXT_END_DRAG_LEFT or tlinewidgets.pointer_context == appconsts.POINTER_CONTEXT_END_DRAG_RIGHT)):
        # with pointer context
        clipenddragmode.maybe_init_for_mouse_press(event, frame)

    # Handle mouse button presses depending which button was pressed and
    # editor state.
    # RIGHT BUTTON: seek frame or display clip menu if not dragging clip end
    if (event.button == 3 and EDIT_MODE() != editorstate.CLIP_END_DRAG and EDIT_MODE() != editorstate.KF_TOOL):
        if ((not editorstate.current_is_active_trim_mode()) and timeline_visible()):
            if not(event.get_state() & Gdk.ModifierType.CONTROL_MASK):
                success = display_clip_menu_pop_up(event.y, event, frame)
                if not success:
                    PLAYER().seek_frame(frame)
        else:
            # For trim modes set <X>_NO_EDIT edit mode and seek frame. and seek frame
            trimmodes.set_no_edit_trim_mode()
            PLAYER().seek_frame(frame)
        return
    # LEFT BUTTON: Select new trimmed clip in active one roll trim mode	with sensitive cursor.
    elif (event.button == 1 and EDIT_MODE() == editorstate.ONE_ROLL_TRIM):	
        track = tlinewidgets.get_track(event.y)	
        if track == None:	
            modesetting.set_default_edit_mode(True)	
            return	
        success = trimmodes.set_oneroll_mode(track, frame)	
        if not success:
            modesetting.set_default_edit_mode(True)	
            return	
            	
        if trimmodes.edit_data["to_side_being_edited"] == True:	
            pointer_context = appconsts.POINTER_CONTEXT_TRIM_LEFT	
        else:	
            pointer_context = appconsts.POINTER_CONTEXT_TRIM_RIGHT	
        gui.editor_window.set_tline_cursor_to_context(pointer_context)	
        gui.editor_window.set_tool_selector_to_mode()	
        if not editorpersistance.prefs.quick_enter_trims:	
            editorstate.timeline_mouse_disabled = True	
        else:	
            trimmodes.oneroll_trim_move(event.x, event.y, frame, None)
    elif event.button == 2:
        updater.zoom_project_length()
    # LEFT BUTTON: Handle left mouse button edits by passing event to current edit mode
    # handler func
    elif event.button == 1 or event.button == 3:
        mode_funcs = EDIT_MODE_FUNCS[EDIT_MODE()]
        press_func = mode_funcs[TL_MOUSE_PRESS]
        press_func(event, frame)
Пример #53
0
def tline_canvas_mouse_pressed(event, frame):
    """
    Mouse event callback from timeline canvas widget
    """
    global mouse_disabled

    if PLAYER().looping():
        return
    elif PLAYER().is_playing():
        PLAYER().stop_playback()
    
    # Double click handled separately
    if event.type == gtk.gdk._2BUTTON_PRESS:
        return

    # Handle and exit parent clip selecting
    if EDIT_MODE() == editorstate.SELECT_PARENT_CLIP:
        syncsplitevent.select_sync_parent_mouse_pressed(event, frame)
        mouse_disabled = True
        # Set INSERT_MODE
        set_default_edit_mode()  
        return

    # Hitting timeline in clip display mode displays timeline in
    # default mode.
    if not timeline_visible():
        updater.display_sequence_in_monitor()
        if (event.button == 1):
            # Now that we have correct edit mode we'll reenter
            # this method to get e.g. a select action
            tline_canvas_mouse_pressed(event, frame)
            return
        if (event.button == 3):
            mouse_disabled == True
            # Right mouse + CTRL displays clip menu if we hit clip
            if (event.state & gtk.gdk.CONTROL_MASK):
                PLAYER().seek_frame(frame)
            # Right mouse on timeline seeks frame
            else:
                success = display_clip_menu_pop_up(event.y, event, frame)
                if not success:
                    PLAYER().seek_frame(frame)
        return

    #  Check if compositor is hit and if so handle compositor editing
    if editorstate.current_is_move_mode() and timeline_visible():
        hit_compositor = tlinewidgets.compositor_hit(frame, event.y, current_sequence().compositors)
        if hit_compositor != None:
            movemodes.clear_selected_clips()
            if event.button == 1:
                compositormodes.set_compositor_mode(hit_compositor)
                mode_funcs = EDIT_MODE_FUNCS[editorstate.COMPOSITOR_EDIT]
                press_func = mode_funcs[TL_MOUSE_PRESS]
                press_func(event, frame)
            elif event.button == 3:
                mouse_disabled == True
                compositormodes.set_compositor_selected(hit_compositor)
                guicomponents.display_compositor_popup_menu(event, hit_compositor,
                                                            compositor_menu_item_activated)
            elif event.button == 2:
                updater.zoom_project_length()
            return

    compositormodes.clear_compositor_selection()

    # Handle mouse button presses depending which button was pressed and
    # editor state.
    # RIGHT BUTTON: seek frame or display clip menu
    if (event.button == 3):
        if ((not editorstate.current_is_active_trim_mode()) and timeline_visible()):
            if not(event.state & gtk.gdk.CONTROL_MASK):
                success = display_clip_menu_pop_up(event.y, event, frame)
                if not success:
                    PLAYER().seek_frame(frame)
            else:
                PLAYER().seek_frame(frame) 
        else:
            # For trim modes set <X>_NO_EDIT edit mode and seek frame. and seek frame
            trimmodes.set_no_edit_trim_mode()
            PLAYER().seek_frame(frame)
        return
    # LEFT BUTTON + CTRL: Select new trimmed clip in one roll trim mode
    elif (event.button == 1 
          and (event.state & gtk.gdk.CONTROL_MASK)
          and EDIT_MODE() == editorstate.ONE_ROLL_TRIM):
        track = tlinewidgets.get_track(event.y)
        if track == None:
            if editorpersistance.prefs.empty_click_exits_trims == True:
                set_default_edit_mode(True)
            return
        success = trimmodes.set_oneroll_mode(track, frame)
        if (not success) and editorpersistance.prefs.empty_click_exits_trims == True:
            set_default_edit_mode(True)
            return
        gui.editor_window.set_cursor_to_mode()
        gui.editor_window.set_mode_selector_to_mode()
        if not editorpersistance.prefs.quick_enter_trims:
            mouse_disabled = True
        else:
            trimmodes.oneroll_trim_move(event.x, event.y, frame, None)
    # LEFT BUTTON + CTRL: Select new trimmed clip in two roll trim mode
    elif (event.button == 1 
          and (event.state & gtk.gdk.CONTROL_MASK)
          and EDIT_MODE() == editorstate.TWO_ROLL_TRIM):
        track = tlinewidgets.get_track(event.y)
        if track == None:
            if editorpersistance.prefs.empty_click_exits_trims == True:
                set_default_edit_mode(True)
            return
        success = trimmodes.set_tworoll_mode(track, frame)
        if (not success) and  editorpersistance.prefs.empty_click_exits_trims == True:
            set_default_edit_mode(True)
            return
        if not editorpersistance.prefs.quick_enter_trims:
            mouse_disabled = True
        else:
            trimmodes.tworoll_trim_move(event.x, event.y, frame, None)
    # LEFT BUTTON: Handle left mouse button edits by passing event to current edit mode
    # handler func
    elif event.button == 1:
        mode_funcs = EDIT_MODE_FUNCS[EDIT_MODE()]
        press_func = mode_funcs[TL_MOUSE_PRESS]
        press_func(event, frame)
    elif event.button == 2:
        updater.zoom_project_length()
Пример #54
0
    if _check_transition_handles(
        (from_part - add_thingy), transition_data["from_handle"],
            to_part - (1 - add_thingy), transition_data["to_handle"]) == False:
        return

    # Get from in and out frames
    from_in = from_clip.clip_out - from_part + add_thingy
    from_out = from_in + length  # or transition will include one frame too many

    # Get to in and out frames
    to_in = to_clip.clip_in - to_part - 1
    to_out = to_in + length  # or transition will include one frame too many

    # Edit clears selection, get track index before selection is cleared
    trans_index = movemodes.selected_range_out
    movemodes.clear_selected_clips()
    transition_type_selection_index = type_combo.get_active(
    )  # these corespond with ...
    producer_tractor = mlttransitions.get_rendered_transition_tractor(
        editorstate.current_sequence(), from_clip, to_clip, from_out, from_in,
        to_out, to_in, transition_type_selection_index, sorted_wipe_luma_index,
        color_str)

    # Save transition data into global variable to be available at render complete callback
    global transition_render_data
    transition_render_data = (trans_index, from_clip, to_clip,
                              transition_data["track"], from_in, to_out,
                              transition_type_selection_index)
    window_text, type_id = mlttransitions.rendered_transitions[
        transition_type_selection_index]
    window_text = _("Rendering ") + window_text
Пример #55
0
def range_overwrite_pressed():
    # Get data
    track = current_sequence().get_first_active_track()
    if editevent.track_lock_check_and_user_info(track, range_overwrite_pressed,
                                                "range overwrite"):
        return

    # Get over clip and check it overwrite range area
    over_clip = _get_new_clip_from_clip_monitor()
    if over_clip == None:
        no_monitor_clip_info(gui.editor_window.window)
        return

    # tractor is has mark in and mark
    mark_in_frame = current_sequence().tractor.mark_in
    mark_out_frame = current_sequence().tractor.mark_out

    # Case timeline marked
    if mark_in_frame != -1 and mark_out_frame != -1:
        range_length = mark_out_frame - mark_in_frame + 1  # end is incl.
        if over_clip.mark_in == -1:
            # This actually never hit because mark in and mark out seem to first and last frame if nothing set
            show_three_point_edit_not_defined()
            return

        over_length = over_clip.mark_out - over_clip.mark_in + 1  # + 1 out incl
        if over_length < range_length:
            monitor_clip_too_short(gui.editor_window.window)
            return

        over_clip_out = over_clip.mark_in + range_length - 1

    # Case clip marked
    elif over_clip.mark_out != -1 and over_clip.mark_in != -1:
        range_length = over_clip.mark_out - over_clip.mark_in + 1  # end is incl.

        if mark_in_frame == -1:
            show_three_point_edit_not_defined()
            return

        over_length = track.get_length() - mark_in_frame + 1  # + 1 out incl
        if over_length < range_length:
            monitor_clip_too_short(gui.editor_window.window)
            return

        over_clip_out = over_clip.mark_out
        mark_out_frame = mark_in_frame + range_length - 1  # -1 because it gets readded later

    # case neither clip or timeline has both in and out points
    else:
        show_three_point_edit_not_defined()
        return

    movemodes.clear_selected_clips()  # edit consumes selection

    updater.save_monitor_frame = False  # hack to not get wrong value saved in MediaFile.current_frame

    data = {
        "track": track,
        "clip": over_clip,
        "clip_in": over_clip.mark_in,
        "clip_out": over_clip_out,
        "mark_in_frame": mark_in_frame,
        "mark_out_frame": mark_out_frame + 1
    }  # +1 because mark is displayed and end of frame end this
    # confirms to user expectation of
    # of how this should work
    action = edit.range_overwrite_action(data)
    action.do_edit()

    updater.display_tline_cut_frame(track,
                                    track.get_clip_index_at(mark_in_frame))