def _plot_latlon(self, remappedModelClimatology, remappedRefClimatology):
# {{{
""" plotting a global lat-lon data set """
season = self.season
config = self.config
configSectionName = self.taskName
mainRunName = config.get('runs', 'mainRunName')
modelOutput = nans_to_numpy_mask(
remappedModelClimatology[self.mpasFieldName].values)
lon = remappedModelClimatology['lon'].values
lat = remappedModelClimatology['lat'].values
lonTarg, latTarg = np.meshgrid(lon, lat)
if remappedRefClimatology is None:
refOutput = None
bias = None
else:
refOutput = nans_to_numpy_mask(
remappedRefClimatology[self.refFieldName].values)
bias = modelOutput - refOutput
filePrefix = self.filePrefix
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
title = '{} ({}, years {:04d}-{:04d})'.format(
self.fieldNameInTitle, season, self.startYear,
self.endYear)
plot_global_comparison(config,
lonTarg,
latTarg,
modelOutput,
refOutput,
bias,
configSectionName,
fileout=outFileName,
title=title,
modelTitle='{}'.format(mainRunName),
refTitle=self.refTitleLabel,
diffTitle=self.diffTitleLabel,
cbarlabel=self.unitsLabel)
caption = '{} {}'.format(season, self.imageCaption)
write_image_xml(
config,
filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Global {}'.format(self.galleryGroup),
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription=self.thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
def _make_plot(self, plotParameter, optionalArgument=None): # {{{
'''
Make a simple plot
Parameters
----------
plotParameter : str
The name of a parameter that is specific to this plot
optionalArgument : <type_goes_here>, optional
An optional argument
<Performs my favorite subtask>
'''
# perform the task
# self.myArg is a copy of the argument we passed in to __init__ when we
# built the task. It is available in any method after that for us to
# use as needed.
print('myArg: {}'.format(self.myArg))
print('plotParameter: {}'.format(plotParameter))
if optionalArgument is not None:
print('optionalArgument: {}'.format(optionalArgument))
# get the file name based on the plot parameter
filePrefix = self.filePrefixes[plotParameter]
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
# make the plot
x = numpy.linspace(0, 1, 1000)
plt.plot(x, x**2)
# save the plot to the output file
plt.savefig(outFileName)
# here's an example of how you would create an XML file for this plot
# with the appropriate entries. Some notes:
# * Gallery groups typically represent all the analysis from a task,
# or sometimes from multiple tasks
# * A gallery might be for just for one set of observations, one
# season, etc., depending on what makes sense
# * Within each gallery, there is one plot for each value in
# 'plotParameters', with a corresponding caption and short thumbnail
# description
caption = 'Plot of x^2 with plotParamter: {}'.format(plotParameter)
write_image_xml(
self.config,
filePrefix,
componentName='Ocean', # 'Ocean', 'Sea Ice', etc.
componentSubdirectory='ocean', # 'ocean', 'sea_ice', etc.
galleryGroup='Title of My Gallery Group',
groupSubtitle='Observations: totally made up',
groupLink='my_grp', # a short link name for the gallery group
gallery='Name of Gallery',
thumbnailDescription=plotParameter,
imageDescription=caption,
imageCaption=caption)
def _write_xml(self, filePrefix): # {{{
caption = 'Meridional Heat Transport'
write_image_xml(config=self.config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Meridional Heat Transport',
groupLink='mht',
imageDescription=caption,
imageCaption=caption) # }}}
def _write_xml(self, filePrefix, plotType): # {{{
caption = u'{} of El Niño 3.4 Climate Index'.format(plotType)
write_image_xml(config=self.config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=u'El Niño 3.4 Climate Index',
groupLink='nino34',
thumbnailDescription=plotType,
imageDescription=caption,
imageCaption=caption) # }}}
def run_task(self): # {{{
"""
Plots time-series output of Antarctic sub-ice-shelf melt rates.
"""
# Authors
# -------
# Xylar Asay-Davis, Stephen Price
self.logger.info("\nPlotting Antarctic melt rate time series for "
"{}...".format(self.iceShelf))
self.logger.info(' Load melt rate data...')
config = self.config
calendar = self.calendar
iceShelfMasksFile = self.iceShelfMasksFile
fcAll = read_feature_collection(iceShelfMasksFile)
fc = FeatureCollection()
for feature in fcAll.features:
if feature['properties']['name'] == self.iceShelf:
fc.add_feature(feature)
break
totalMeltFlux, meltRates = self._load_ice_shelf_fluxes(config)
plotControl = self.controlConfig is not None
if plotControl:
controlRunName = self.controlConfig.get('runs', 'mainRunName')
refTotalMeltFlux, refMeltRates = \
self._load_ice_shelf_fluxes(self.controlConfig)
# Load observations from multiple files and put in dictionary based
# on shelf keyname
observationsDirectory = build_obs_path(config, 'ocean',
'meltSubdirectory')
obsFileNameDict = {'Rignot et al. (2013)':
'Rignot_2013_melt_rates_20200623.csv',
'Rignot et al. (2013) SS':
'Rignot_2013_melt_rates_SS_20200623.csv'}
obsDict = {} # dict for storing dict of obs data
for obsName in obsFileNameDict:
obsFileName = '{}/{}'.format(observationsDirectory,
obsFileNameDict[obsName])
obsDict[obsName] = {}
obsFile = csv.reader(open(obsFileName, 'rU'))
next(obsFile, None) # skip the header line
for line in obsFile: # some later useful values commented out
shelfName = line[0]
if shelfName != self.iceShelf:
continue
# surveyArea = line[1]
meltFlux = float(line[2])
meltFluxUncertainty = float(line[3])
meltRate = float(line[4])
meltRateUncertainty = float(line[5])
# actualArea = float( line[6] ) # actual area here is in sq km
# build dict of obs. keyed to filename description
# (which will be used for plotting)
obsDict[obsName] = {
'meltFlux': meltFlux,
'meltFluxUncertainty': meltFluxUncertainty,
'meltRate': meltRate,
'meltRateUncertainty': meltRateUncertainty}
break
# If areas from obs file used need to be converted from sq km to sq m
mainRunName = config.get('runs', 'mainRunName')
movingAverageMonths = config.getint('timeSeriesAntarcticMelt',
'movingAverageMonths')
outputDirectory = build_config_full_path(config, 'output',
'timeseriesSubdirectory')
make_directories(outputDirectory)
self.logger.info(' Make plots...')
# get obs melt flux and unc. for shelf (similar for rates)
obsMeltFlux = []
obsMeltFluxUnc = []
obsMeltRate = []
obsMeltRateUnc = []
for obsName in obsDict:
if len(obsDict[obsName]) > 0:
obsMeltFlux.append(
obsDict[obsName]['meltFlux'])
obsMeltFluxUnc.append(
obsDict[obsName]['meltFluxUncertainty'])
obsMeltRate.append(
obsDict[obsName]['meltRate'])
obsMeltRateUnc.append(
obsDict[obsName]['meltRateUncertainty'])
else:
# append NaN so this particular obs won't plot
self.logger.warning('{} observations not available for '
'{}'.format(obsName, self.iceShelf))
obsMeltFlux.append(None)
obsMeltFluxUnc.append(None)
obsMeltRate.append(None)
obsMeltRateUnc.append(None)
title = self.iceShelf.replace('_', ' ')
xLabel = 'Time (yr)'
yLabel = 'Melt Flux (GT/yr)'
timeSeries = totalMeltFlux.isel(nRegions=self.regionIndex)
filePrefix = 'melt_flux_{}'.format(self.iceShelf.replace(' ', '_'))
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
fields = [timeSeries]
lineColors = ['k']
lineWidths = [2.5]
legendText = [mainRunName]
if plotControl:
fields.append(refTotalMeltFlux.isel(nRegions=self.regionIndex))
lineColors.append('r')
lineWidths.append(1.2)
legendText.append(controlRunName)
fig = timeseries_analysis_plot(config, fields, calendar=calendar,
title=title, xlabel=xLabel,
ylabel=yLabel,
movingAveragePoints=movingAverageMonths,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
obsMean=obsMeltFlux,
obsUncertainty=obsMeltFluxUnc,
obsLegend=list(obsDict.keys()))
# do this before the inset because otherwise it moves the inset
# and cartopy doesn't play too well with tight_layout anyway
plt.tight_layout()
add_inset(fig, fc, width=2.0, height=2.0)
savefig(outFileName)
caption = 'Running Mean of Total Melt Flux under Ice ' \
'Shelves in the {} Region'.format(title)
write_image_xml(
config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Antarctic Melt Time Series',
groupLink='antmelttime',
gallery='Total Melt Flux',
thumbnailDescription=title,
imageDescription=caption,
imageCaption=caption)
xLabel = 'Time (yr)'
yLabel = 'Melt Rate (m/yr)'
timeSeries = meltRates.isel(nRegions=self.regionIndex)
filePrefix = 'melt_rate_{}'.format(self.iceShelf.replace(' ', '_'))
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
fields = [timeSeries]
lineColors = ['k']
lineWidths = [2.5]
legendText = [mainRunName]
if plotControl:
fields.append(refMeltRates.isel(nRegions=self.regionIndex))
lineColors.append('r')
lineWidths.append(1.2)
legendText.append(controlRunName)
if config.has_option(self.taskName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.taskName,
'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.taskName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.taskName,
'yearStrideXTicks')
else:
yearStrideXTicks = None
fig = timeseries_analysis_plot(config, fields, calendar=calendar,
title=title, xlabel=xLabel,
ylabel=yLabel,
movingAveragePoints=movingAverageMonths,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks,
obsMean=obsMeltRate,
obsUncertainty=obsMeltRateUnc,
obsLegend=list(obsDict.keys()))
# do this before the inset because otherwise it moves the inset
# and cartopy doesn't play too well with tight_layout anyway
plt.tight_layout()
add_inset(fig, fc, width=2.0, height=2.0)
savefig(outFileName)
caption = 'Running Mean of Area-averaged Melt Rate under Ice ' \
'Shelves in the {} Region'.format(title)
write_image_xml(
config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Antarctic Melt Time Series',
groupLink='antmelttime',
gallery='Area-averaged Melt Rate',
thumbnailDescription=title,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
"""
Compute vertical agregates of the data and plot the time series
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani, Greg Streletz
self.logger.info("\nPlotting depth-integrated time series of "
"{}...".format(self.fieldNameInTitle))
config = self.config
calendar = self.calendar
mainRunName = config.get('runs', 'mainRunName')
plotTitles = config.getExpression('regions', 'plotTitles')
allRegionNames = config.getExpression('regions', 'regions')
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = plotTitles[regionIndex]
startDate = config.get('timeSeries', 'startDate')
endDate = config.get('timeSeries', 'endDate')
# Load data
self.logger.info(' Load ocean data...')
ds = open_mpas_dataset(fileName=self.inFileName,
calendar=calendar,
variableList=[self.mpasFieldName, 'depth'],
timeVariableNames=None,
startDate=startDate,
endDate=endDate)
ds = ds.isel(nOceanRegionsTmp=regionIndex)
depths = ds.depth.values
divisionDepths = config.getExpression(self.sectionName, 'depths')
# for each depth interval to plot, determine the top and bottom depth
topDepths = [0, 0] + divisionDepths
bottomDepths = [depths[-1]] + divisionDepths + [depths[-1]]
legends = []
for top, bottom in zip(topDepths, bottomDepths):
if bottom == depths[-1]:
legends.append('{}m-bottom'.format(top))
else:
legends.append('{}m-{}m'.format(top, bottom))
# more possible symbols than we typically use
lines = ['-', '-', '--', None, None, None, None]
markers = [None, None, None, '+', 'o', '^', 'v']
widths = [5, 3, 3, 3, 3, 3, 3]
points = [None, None, None, 300, 300, 300, 300]
color = 'k'
xLabel = 'Time [years]'
yLabel = self.yAxisLabel
title = '{}, {} \n {} (black)'.format(self.fieldNameInTitle,
regionNameInTitle, mainRunName)
outFileName = '{}/{}.png'.format(self.plotsDirectory, self.filePrefix)
timeSeries = []
lineColors = []
lineStyles = []
lineMarkers = []
lineWidths = []
maxPoints = []
legendText = []
for rangeIndex in range(len(topDepths)):
top = topDepths[rangeIndex]
bottom = bottomDepths[rangeIndex]
field = ds[self.mpasFieldName].where(ds.depth > top)
field = field.where(ds.depth <= bottom)
timeSeries.append(field.sum('nVertLevels'))
lineColors.append(color)
lineStyles.append(lines[rangeIndex])
lineMarkers.append(markers[rangeIndex])
lineWidths.append(widths[rangeIndex])
maxPoints.append(points[rangeIndex])
legendText.append(legends[rangeIndex])
preprocessedReferenceRunName = config.get(
'runs', 'preprocessedReferenceRunName')
if preprocessedReferenceRunName != 'None':
preprocessedInputDirectory = config.get(
'oceanPreprocessedReference', 'baseDirectory')
self.logger.info(' Load in preprocessed reference data...')
preprocessedFilePrefix = config.get(self.sectionName,
'preprocessedFilePrefix')
inFilesPreprocessed = '{}/{}.{}.year*.nc'.format(
preprocessedInputDirectory, preprocessedFilePrefix,
preprocessedReferenceRunName)
combine_time_series_with_ncrcat(
inFilesPreprocessed,
self.preprocessedIntermediateFileName,
logger=self.logger)
dsPreprocessed = open_mpas_dataset(
fileName=self.preprocessedIntermediateFileName,
calendar=calendar,
timeVariableNames='xtime')
yearStart = days_to_datetime(ds.Time.min(), calendar=calendar).year
yearEnd = days_to_datetime(ds.Time.max(), calendar=calendar).year
timeStart = date_to_days(year=yearStart,
month=1,
day=1,
calendar=calendar)
timeEnd = date_to_days(year=yearEnd,
month=12,
day=31,
calendar=calendar)
yearEndPreprocessed = days_to_datetime(dsPreprocessed.Time.max(),
calendar=calendar).year
if yearStart <= yearEndPreprocessed:
dsPreprocessed = dsPreprocessed.sel(
Time=slice(timeStart, timeEnd))
else:
self.logger.warning('Warning: Preprocessed time series ends '
'before the timeSeries startYear and will '
'not be plotted.')
preprocessedReferenceRunName = 'None'
# rolling mean seems to have trouble with dask data sets so we
# write out the data set and read it back as a single-file data set
# (without dask)
dsPreprocessed = dsPreprocessed.drop('xtime')
write_netcdf(dsPreprocessed, self.preprocessedFileName)
dsPreprocessed = xarray.open_dataset(self.preprocessedFileName)
if preprocessedReferenceRunName != 'None':
color = 'purple'
title = '{} \n {} (purple)'.format(title,
preprocessedReferenceRunName)
preprocessedFieldPrefix = config.get(self.sectionName,
'preprocessedFieldPrefix')
movingAveragePoints = config.getint(self.sectionName,
'movingAveragePoints')
suffixes = ['tot'
] + ['{}m'.format(depth)
for depth in divisionDepths] + ['btm']
# these preprocessed data are already anomalies
dsPreprocessed = compute_moving_avg(dsPreprocessed,
movingAveragePoints)
for rangeIndex in range(len(suffixes)):
variableName = '{}_{}'.format(preprocessedFieldPrefix,
suffixes[rangeIndex])
if variableName in list(dsPreprocessed.data_vars.keys()):
timeSeries.append(dsPreprocessed[variableName])
else:
self.logger.warning(
'Warning: Preprocessed variable {} '
'not found. Skipping.'.format(variableName))
timeSeries.extend(None)
lineColors.append(color)
lineStyles.append(lines[rangeIndex])
lineMarkers.append(markers[rangeIndex])
lineWidths.append(widths[rangeIndex])
maxPoints.append(points[rangeIndex])
legendText.append(None)
if self.controlConfig is not None:
controlRunName = self.controlConfig.get('runs', 'mainRunName')
title = '{} \n {} (red)'.format(title, controlRunName)
self.logger.info(' Load ocean data from control run...')
controlStartYear = self.controlConfig.getint(
'timeSeries', 'startYear')
controlEndYear = self.controlConfig.getint('timeSeries', 'endYear')
controlStartDate = '{:04d}-01-01_00:00:00'.format(controlStartYear)
controlEndDate = '{:04d}-12-31_23:59:59'.format(controlEndYear)
dsRef = open_mpas_dataset(
fileName=self.refFileName,
calendar=calendar,
variableList=[self.mpasFieldName, 'depth'],
timeVariableNames=None,
startDate=controlStartDate,
endDate=controlEndDate)
dsRef = dsRef.isel(nOceanRegionsTmp=regionIndex)
color = 'r'
for rangeIndex in range(len(topDepths)):
top = topDepths[rangeIndex]
bottom = bottomDepths[rangeIndex]
field = dsRef[self.mpasFieldName].where(dsRef.depth > top)
field = field.where(dsRef.depth <= bottom)
timeSeries.append(field.sum('nVertLevels'))
lineColors.append(color)
lineStyles.append(lines[rangeIndex])
lineMarkers.append(markers[rangeIndex])
lineWidths.append(widths[rangeIndex])
maxPoints.append(points[rangeIndex])
legendText.append(None)
if config.has_option(self.taskName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.taskName, 'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.taskName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.taskName, 'yearStrideXTicks')
else:
yearStrideXTicks = None
timeseries_analysis_plot(config=config,
dsvalues=timeSeries,
calendar=calendar,
title=title,
xlabel=xLabel,
ylabel=yLabel,
movingAveragePoints=None,
lineColors=lineColors,
lineStyles=lineStyles,
markers=lineMarkers,
lineWidths=lineWidths,
legendText=legendText,
maxPoints=maxPoints,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
savefig(outFileName)
write_image_xml(config=config,
filePrefix=self.filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=self.galleryGroup,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription='{} {}'.format(
self.regionName, self.thumbnailSuffix),
imageDescription=self.imageCaption,
imageCaption=self.imageCaption)
def run_task(self): # {{{
"""
Make the Hovmoller plot from the time series.
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani, Greg Streletz
self.logger.info("\nPlotting {} trends vs. depth...".format(
self.fieldNameInTitle))
config = self.config
mainRunName = config.get('runs', 'mainRunName')
plotTitles = config.getExpression('regions', 'plotTitles')
allRegionNames = config.getExpression('regions', 'regions')
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = plotTitles[regionIndex]
startDate = self.config.get('timeSeries', 'startDate')
endDate = self.config.get('timeSeries', 'endDate')
# Load data
self.logger.info(' Load ocean data...')
ds = open_mpas_dataset(fileName=self.inFileName,
calendar=self.calendar,
variableList=[self.mpasFieldName],
timeVariableNames=None,
startDate=startDate,
endDate=endDate)
ds = ds.isel(nOceanRegionsTmp=regionIndex)
# Note: restart file, not a mesh file because we need refBottomDepth,
# not in a mesh file
try:
restartFile = self.runStreams.readpath('restart')[0]
except ValueError:
raise IOError('No MPAS-O restart file found: need at least one '
'restart file for OHC calculation')
# Define/read in general variables
self.logger.info(' Read in depth...')
with xr.open_dataset(restartFile) as dsRestart:
# reference depth [m]
depth = dsRestart.refBottomDepth.values
Time = ds.Time.values
field = ds[self.mpasFieldName].values.transpose()
xLabel = 'Time [years]'
yLabel = 'Depth [m]'
title = '{}, {} \n {}'.format(self.fieldNameInTitle, regionNameInTitle,
mainRunName)
figureName = '{}/{}.png'.format(self.plotsDirectory, self.filePrefix)
if config.has_option(self.sectionName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.sectionName,
'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.sectionName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.sectionName,
'yearStrideXTicks')
else:
yearStrideXTicks = None
plot_vertical_section(config,
Time,
depth,
field,
self.sectionName,
suffix='',
colorbarLabel=self.unitsLabel,
title=title,
xlabel=xLabel,
ylabel=yLabel,
fileout=figureName,
linewidths=1,
xArrayIsTime=True,
calendar=self.calendar,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
write_image_xml(config=config,
filePrefix=self.filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=self.galleryGroup,
groupLink=self.groupLink,
galleryName=self.galleryName,
thumbnailDescription='{} {}'.format(
self.regionName, self.thumbnailSuffix),
imageDescription=self.imageCaption,
imageCaption=self.imageCaption)
def run_task(self): # {{{
'''
Process MOC analysis member data if available, or compute MOC at
post-processing if not. Plots streamfunction climatolgoical sections
as well as time series of max Atlantic MOC at 26.5N (latitude of
RAPID MOC Array).
'''
# Authors
# -------
# Milena Veneziani, Mark Petersen, Phillip J. Wolfram, Xylar Asay-Davis
self.logger.info("\nPlotting streamfunction of Meridional Overturning "
"Circulation (MOC)...")
config = self.config
# **** Compute MOC ****
if not self.usePostprocessing and self.mocAnalysisMemberEnabled:
self._compute_moc_climo_analysismember()
dsMOCTimeSeries = self._compute_moc_time_series_analysismember()
else:
self._compute_moc_climo_postprocess()
dsMOCTimeSeries = self._compute_moc_time_series_postprocess()
# **** Plot MOC ****
# Define plotting variables
mainRunName = config.get('runs', 'mainRunName')
movingAveragePoints = config.getint(self.sectionName,
'movingAveragePoints')
movingAveragePointsClimatological = config.getint(
self.sectionName, 'movingAveragePointsClimatological')
colorbarLabel = '[Sv]'
xLabel = 'latitude [deg]'
yLabel = 'depth [m]'
for region in self.regionNames:
self.logger.info(' Plot climatological {} MOC...'.format(region))
title = '{} MOC (ANN, years {:04d}-{:04d})\n {}'.format(
region, self.startYearClimo, self.endYearClimo, mainRunName)
filePrefix = self.filePrefixes[region]
figureName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
x = self.lat[region]
y = self.depth
z = self.moc[region]
# Subset lat range
minLat = config.getExpression(self.sectionName,
'latBinMin{}'.format(region))
maxLat = config.getExpression(self.sectionName,
'latBinMax{}'.format(region))
indLat = np.logical_and(x >= minLat, x <= maxLat)
x = x[indLat]
z = z[:, indLat]
plot_vertical_section(config,
x,
y,
z,
self.sectionName,
suffix=region,
colorbarLabel=colorbarLabel,
title=title,
xlabel=xLabel,
ylabel=yLabel,
fileout=figureName,
N=movingAveragePointsClimatological)
caption = '{} Meridional Overturning Streamfunction'.format(region)
write_image_xml(
config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Meridional Overturning Streamfunction',
groupLink='moc',
thumbnailDescription=region,
imageDescription=caption,
imageCaption=caption) # }}}
# Plot time series
self.logger.info(' Plot time series of max Atlantic MOC at 26.5N...')
xLabel = 'Time [years]'
yLabel = '[Sv]'
title = 'Max Atlantic MOC at $26.5\degree$N\n {}'.format(mainRunName)
filePrefix = self.filePrefixes['timeSeries']
figureName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
if config.has_option(self.taskName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.taskName, 'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.taskName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.taskName, 'yearStrideXTicks')
else:
yearStrideXTicks = None
fields = [dsMOCTimeSeries.mocAtlantic26]
lineColors = ['k']
lineWidths = [2]
legendText = [mainRunName]
if self.refConfig is not None:
refDirectory = build_config_full_path(self.refConfig, 'output',
'timeseriesSubdirectory')
refStartYear = self.refConfig.getint('timeSeries', 'startYear')
refEndYear = self.refConfig.getint('timeSeries', 'endYear')
refStartDate = '{:04d}-01-01_00:00:00'.format(refStartYear)
refEndDate = '{:04d}-12-31_23:59:59'.format(refEndYear)
refFileName = '{}/mocTimeSeries.nc'.format(refDirectory)
self.logger.info(' Read in reference run MOC time series')
dsRefMOC = open_mpas_dataset(fileName=refFileName,
calendar=self.calendar,
timeVariableNames=None,
variableList=['mocAtlantic26'],
startDate=refStartDate,
endDate=refEndDate)
fields.append(dsRefMOC.mocAtlantic26)
lineColors.append('r')
lineWidths.append(2)
refRunName = self.refConfig.get('runs', 'mainRunName')
legendText.append(refRunName)
timeseries_analysis_plot(config,
fields,
movingAveragePoints,
title,
xLabel,
yLabel,
figureName,
calendar=self.calendar,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
caption = u'Time Series of maximum Meridional Overturning ' \
u'Circulation at 26.5°N'
write_image_xml(config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Meridional Overturning Streamfunction',
groupLink='moc',
thumbnailDescription='Time Series',
imageDescription=caption,
imageCaption=caption) # }}}
def _plot_transect(self, remappedModelClimatology, remappedRefClimatology):
# {{{
""" plotting the transect """
season = self.season
config = self.config
configSectionName = self.configSectionName
mainRunName = config.get('runs', 'mainRunName')
# broadcast x and z to have the same dimensions
x, z = xr.broadcast(remappedModelClimatology.x,
remappedModelClimatology.z)
# set lat and lon in case we want to plot versus these quantities
lat = remappedModelClimatology.lat
lon = remappedModelClimatology.lon
# convert x, z, lat, and lon to numpy arrays; make a copy because
# they are sometimes read-only (not sure why)
x = x.values.copy().transpose()
z = z.values.copy().transpose()
lat = lat.values.copy().transpose()
lon = lon.values.copy().transpose()
self.lat = lat
self.lon = lon
# z is masked out with NaNs in some locations (where there is land) but
# this makes pcolormesh unhappy so we'll zero out those locations
z[numpy.isnan(z)] = 0.
modelOutput = nans_to_numpy_mask(
remappedModelClimatology[self.mpasFieldName].values)
modelOutput = modelOutput.transpose()
if remappedRefClimatology is None:
refOutput = None
bias = None
else:
refOutput = remappedRefClimatology[self.refFieldName]
dims = refOutput.dims
refOutput = nans_to_numpy_mask(refOutput.values)
if dims[1] != 'nPoints':
assert (dims[0] == 'nPoints')
refOutput = refOutput.transpose()
bias = modelOutput - refOutput
filePrefix = self.filePrefix
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
title = '{}\n({}, years {:04d}-{:04d})'.format(self.fieldNameInTitle,
season, self.startYear,
self.endYear)
xLabel = 'Distance [km]'
yLabel = 'Depth [m]'
# define the axis labels and the data to use for the upper
# x axis or axes, if such additional axes have been requested
upperXAxes = config.get('transects', 'upperXAxes')
numUpperTicks = config.getint('transects', 'numUpperTicks')
upperXAxisTickLabelPrecision = config.getint(
'transects', 'upperXAxisTickLabelPrecision')
self._set_third_x_axis_to_none()
if upperXAxes == 'neither':
self._set_second_x_axis_to_none()
elif upperXAxes == 'lat':
self._set_second_x_axis_to_latitude()
elif upperXAxes == 'lon':
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'both':
self._set_second_x_axis_to_longitude()
self._set_third_x_axis_to_latitude()
elif upperXAxes == 'greatestExtent':
if self._greatest_extent(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'strictlyMonotonic':
if self._strictly_monotonic(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'mostMonotonic':
if self._most_monotonic(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'mostStepsInSameDirection':
if self._most_steps_in_same_direction(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'fewestDirectionChanges':
if self._fewest_direction_changes(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
else:
raise ValueError('invalid option for upperXAxes')
# get the parameters determining what type of plot to use,
# what line styles and line colors to use, and whether and how
# to label contours
compareAsContours = config.getboolean('transects',
'compareAsContoursOnSinglePlot')
contourLineStyle = config.get('transects', 'contourLineStyle')
contourLineColor = config.get('transects', 'contourLineColor')
comparisonContourLineStyle = config.get('transects',
'comparisonContourLineStyle')
comparisonContourLineColor = config.get('transects',
'comparisonContourLineColor')
if compareAsContours:
labelContours = config.getboolean(
'transects', 'labelContoursOnContourComparisonPlots')
else:
labelContours = config.getboolean('transects',
'labelContoursOnHeatmaps')
contourLabelPrecision = config.getint('transects',
'contourLabelPrecision')
# construct a three-panel comparison plot for the transect, or a
# single-panel contour comparison plot if compareAsContours is True
plot_vertical_section_comparison(
config,
x,
z,
modelOutput,
refOutput,
bias,
outFileName,
configSectionName,
cbarLabel=self.unitsLabel,
xlabel=xLabel,
ylabel=yLabel,
title=title,
modelTitle='{}'.format(mainRunName),
refTitle=self.refTitleLabel,
diffTitle=self.diffTitleLabel,
secondXAxisData=self.secondXAxisData,
secondXAxisLabel=self.secondXAxisLabel,
thirdXAxisData=self.thirdXAxisData,
thirdXAxisLabel=self.thirdXAxisLabel,
numUpperTicks=numUpperTicks,
upperXAxisTickLabelPrecision=upperXAxisTickLabelPrecision,
invertYAxis=False,
backgroundColor='#918167',
compareAsContours=compareAsContours,
lineStyle=contourLineStyle,
lineColor=contourLineColor,
comparisonContourLineStyle=comparisonContourLineStyle,
comparisonContourLineColor=comparisonContourLineColor,
labelContours=labelContours,
contourLabelPrecision=contourLabelPrecision)
caption = '{} {}'.format(season, self.imageCaption)
write_image_xml(config,
filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=self.galleryGroup,
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription=self.thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
"""
Performs analysis of the time-series output of Antarctic sub-ice-shelf
melt rates.
"""
# Authors
# -------
# Xylar Asay-Davis, Stephen Price
self.logger.info("\nPlotting Antarctic melt rate time series...")
self.logger.info(' Load melt rate data...')
config = self.config
calendar = self.calendar
totalMeltFlux, meltRates = self._compute_ice_shelf_fluxes()
plotRef = self.refConfig is not None
if plotRef:
refRunName = self.refConfig.get('runs', 'mainRunName')
refTotalMeltFlux, refMeltRates = \
self._load_ice_shelf_fluxes(self.refConfig)
# Load observations from multiple files and put in dictionary based
# on shelf keyname
observationsDirectory = build_config_full_path(config,
'oceanObservations',
'meltSubdirectory')
obsFileNameDict = {
'Rignot et al. (2013)': 'Rignot_2013_melt_rates.csv',
'Rignot et al. (2013) SS': 'Rignot_2013_melt_rates_SS.csv'
}
obsDict = {} # dict for storing dict of obs data
for obsName in obsFileNameDict:
obsFileName = '{}/{}'.format(observationsDirectory,
obsFileNameDict[obsName])
obsDict[obsName] = {}
obsFile = csv.reader(open(obsFileName, 'rU'))
next(obsFile, None) # skip the header line
for line in obsFile: # some later useful values commented out
shelfName = line[0]
# surveyArea = line[1]
meltFlux = float(line[2])
meltFluxUncertainty = float(line[3])
meltRate = float(line[4])
meltRateUncertainty = float(line[5])
# actualArea = float( line[6] ) # actual area here is in sq km
# build dict of obs. keyed to filename description
# (which will be used for plotting)
obsDict[obsName][shelfName] = {
'meltFlux': meltFlux,
'meltFluxUncertainty': meltFluxUncertainty,
'meltRate': meltRate,
'meltRateUncertainty': meltRateUncertainty
}
# If areas from obs file used need to be converted from sq km to sq m
mainRunName = config.get('runs', 'mainRunName')
movingAverageMonths = config.getint('timeSeriesAntarcticMelt',
'movingAverageMonths')
nRegions = totalMeltFlux.sizes['nRegions']
outputDirectory = build_config_full_path(config, 'output',
'timeseriesSubdirectory')
make_directories(outputDirectory)
self.logger.info(' Make plots...')
for iRegion in range(nRegions):
regionName = self.iceShelvesToPlot[iRegion]
# get obs melt flux and unc. for shelf (similar for rates)
obsMeltFlux = []
obsMeltFluxUnc = []
obsMeltRate = []
obsMeltRateUnc = []
for obsName in obsDict:
if regionName in obsDict[obsName]:
obsMeltFlux.append(
obsDict[obsName][regionName]['meltFlux'])
obsMeltFluxUnc.append(
obsDict[obsName][regionName]['meltFluxUncertainty'])
obsMeltRate.append(
obsDict[obsName][regionName]['meltRate'])
obsMeltRateUnc.append(
obsDict[obsName][regionName]['meltRateUncertainty'])
else:
# append NaN so this particular obs won't plot
self.logger.warning('{} observations not available for '
'{}'.format(obsName, regionName))
obsMeltFlux.append(None)
obsMeltFluxUnc.append(None)
obsMeltRate.append(None)
obsMeltRateUnc.append(None)
title = regionName.replace('_', ' ')
regionName = regionName.replace(' ', '_')
xLabel = 'Time (yr)'
yLabel = 'Melt Flux (GT/yr)'
timeSeries = totalMeltFlux.isel(nRegions=iRegion)
filePrefix = 'melt_flux_{}'.format(regionName)
figureName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
fields = [timeSeries]
lineColors = ['k']
lineWidths = [2.5]
legendText = [mainRunName]
if plotRef:
fields.append(refTotalMeltFlux.isel(nRegions=iRegion))
lineColors.append('r')
lineWidths.append(1.2)
legendText.append(refRunName)
timeseries_analysis_plot(config,
fields,
movingAverageMonths,
title,
xLabel,
yLabel,
figureName,
calendar=calendar,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
obsMean=obsMeltFlux,
obsUncertainty=obsMeltFluxUnc,
obsLegend=list(obsDict.keys()))
caption = 'Running Mean of Total Melt Flux under Ice ' \
'Shelves in the {} Region'.format(title)
write_image_xml(config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Antarctic Melt Time Series',
groupLink='antmelttime',
gallery='Total Melt Flux',
thumbnailDescription=title,
imageDescription=caption,
imageCaption=caption)
xLabel = 'Time (yr)'
yLabel = 'Melt Rate (m/yr)'
timeSeries = meltRates.isel(nRegions=iRegion)
filePrefix = 'melt_rate_{}'.format(regionName)
figureName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
fields = [timeSeries]
lineColors = ['k']
lineWidths = [2.5]
legendText = [mainRunName]
if plotRef:
fields.append(refMeltRates.isel(nRegions=iRegion))
lineColors.append('r')
lineWidths.append(1.2)
legendText.append(refRunName)
if config.has_option(self.taskName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.taskName,
'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.taskName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.taskName,
'yearStrideXTicks')
else:
yearStrideXTicks = None
timeseries_analysis_plot(config,
fields,
movingAverageMonths,
title,
xLabel,
yLabel,
figureName,
calendar=calendar,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
obsMean=obsMeltRate,
obsUncertainty=obsMeltRateUnc,
obsLegend=list(obsDict.keys()),
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
caption = 'Running Mean of Area-averaged Melt Rate under Ice ' \
'Shelves in the {} Region'.format(title)
write_image_xml(config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Antarctic Melt Time Series',
groupLink='antmelttime',
gallery='Area-averaged Melt Rate',
thumbnailDescription=title,
imageDescription=caption,
imageCaption=caption)
def _plot_antarctic(self, remappedModelClimatology,
remappedRefClimatology): # {{{
""" plotting an Antarctic data set """
season = self.season
comparisonGridName = self.comparisonGridName
config = self.config
configSectionName = self.configSectionName
mainRunName = config.get('runs', 'mainRunName')
oceanMask = remappedModelClimatology['validMask'].values
self.landMask = np.ma.masked_array(np.ones(oceanMask.shape),
mask=np.logical_not(
np.isnan(oceanMask)))
modelOutput = nans_to_numpy_mask(
remappedModelClimatology[self.mpasFieldName].values)
if remappedRefClimatology is None:
refOutput = None
bias = None
else:
refOutput = nans_to_numpy_mask(
remappedRefClimatology[self.refFieldName].values)
bias = modelOutput - refOutput
x = interp_extrap_corner(remappedModelClimatology['x'].values)
y = interp_extrap_corner(remappedModelClimatology['y'].values)
filePrefix = self.filePrefix
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
title = '{} ({}, years {:04d}-{:04d})'.format(self.fieldNameInTitle,
season, self.startYear,
self.endYear)
plot_polar_projection_comparison(config,
x,
y,
self.landMask,
modelOutput,
refOutput,
bias,
fileout=outFileName,
colorMapSectionName=configSectionName,
title=title,
modelTitle='{}'.format(mainRunName),
refTitle=self.refTitleLabel,
diffTitle=self.diffTitleLabel,
cbarlabel=self.unitsLabel)
upperGridName = comparisonGridName[0].upper() + comparisonGridName[1:]
caption = '{} {}'.format(season, self.imageCaption)
write_image_xml(config,
filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='{} {}'.format(upperGridName,
self.galleryGroup),
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription=self.thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
'''
Process MOC analysis member data if available, or compute MOC at
post-processing if not. Plots streamfunction climatolgoical sections
as well as time series of max Atlantic MOC at 26.5N (latitude of
RAPID MOC Array).
'''
# Authors
# -------
# Milena Veneziani, Mark Petersen, Phillip J. Wolfram, Xylar Asay-Davis
self.logger.info("\nPlotting streamfunction of Meridional Overturning "
"Circulation (MOC)...")
config = self.config
# **** Compute MOC ****
# Check whether MOC Analysis Member is enabled
if self.mocAnalysisMemberEnabled:
# Add a moc_analisysMember_processing
self.logger.info('*** MOC Analysis Member is on ***')
# (mocDictClimo, mocDictTseries) = \
# self._compute_moc_analysismember(config, streams, calendar,
# sectionName, dictClimo,
# dictTseries)
# delete the following 3 lines after analysis of the MOC AM is
# supported
self.logger.info('...but not yet supported. Using offline MOC')
self._compute_moc_climo_postprocess()
dsMOCTimeSeries = self._compute_moc_time_series_postprocess()
else:
self._compute_moc_climo_postprocess()
dsMOCTimeSeries = self._compute_moc_time_series_postprocess()
# **** Plot MOC ****
# Define plotting variables
mainRunName = config.get('runs', 'mainRunName')
movingAveragePoints = config.getint(self.sectionName,
'movingAveragePoints')
movingAveragePointsClimatological = config.getint(
self.sectionName, 'movingAveragePointsClimatological')
colorbarLabel = '[Sv]'
xLabel = 'latitude [deg]'
yLabel = 'depth [m]'
for region in self.regionNames:
self.logger.info(' Plot climatological {} MOC...'.format(region))
title = '{} MOC (ANN, years {:04d}-{:04d})\n {}'.format(
region, self.startYearClimo, self.endYearClimo, mainRunName)
filePrefix = self.filePrefixes[region]
figureName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
x = self.lat[region]
y = self.depth
z = self.moc[region]
plot_vertical_section(config,
x,
y,
z,
self.sectionName,
suffix=region,
colorbarLabel=colorbarLabel,
title=title,
xlabel=xLabel,
ylabel=yLabel,
fileout=figureName,
N=movingAveragePointsClimatological)
caption = '{} Meridional Overturning Streamfunction'.format(region)
write_image_xml(
config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Meridional Overturning Streamfunction',
groupLink='moc',
thumbnailDescription=region,
imageDescription=caption,
imageCaption=caption) # }}}
# Plot time series
self.logger.info(' Plot time series of max Atlantic MOC at 26.5N...')
xLabel = 'Time [years]'
yLabel = '[Sv]'
title = 'Max Atlantic MOC at $26.5^\circ$N\n {}'.format(mainRunName)
filePrefix = self.filePrefixes['timeSeries']
figureName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
if config.has_option(self.taskName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.taskName, 'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.taskName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.taskName, 'yearStrideXTicks')
else:
yearStrideXTicks = None
timeseries_analysis_plot(config, [dsMOCTimeSeries.mocAtlantic26],
movingAveragePoints,
title,
xLabel,
yLabel,
figureName,
lineStyles=['k-'],
lineWidths=[2],
legendText=[None],
calendar=self.calendar,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
caption = u'Time Series of maximum Meridional Overturning ' \
u'Circulation at 26.5°N'
write_image_xml(config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Meridional Overturning Streamfunction',
groupLink='moc',
thumbnailDescription='Time Series',
imageDescription=caption,
imageCaption=caption) # }}}
def run_task(self): # {{{
"""
Performs analysis of sea-ice properties by comparing with
previous model results and/or observations.
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani
config = self.config
season = self.season
comparisonGridName = self.comparisonGridName
self.logger.info("\nPlotting 2-d maps of {} climatologies for "
"{} against {}...".format(
self.fieldNameInTitle,
season, self.refTitleLabel))
mainRunName = config.get('runs', 'mainRunName')
startYear = self.startYear
endYear = self.endYear
hemisphere = self.hemisphere
sectionName = self.taskName
vertical = config.getboolean(sectionName, 'vertical')
if hemisphere == 'NH':
plotProjection = 'npstere'
else:
plotProjection = 'spstere'
referenceLongitude = config.getfloat(sectionName,
'referenceLongitude')
minimumLatitude = config.getfloat(sectionName,
'minimumLatitude')
remappedFileName = \
self.remapMpasClimatologySubtask.get_remapped_file_name(
season=season, comparisonGridName=comparisonGridName)
remappedClimatology = xr.open_dataset(remappedFileName)
modelOutput = remappedClimatology[self.mpasFieldName].values
if self.maskValue is not None:
modelOutput = ma.masked_values(modelOutput, self.maskValue)
lon = remappedClimatology['lon'].values
lat = remappedClimatology['lat'].values
lonTarg, latTarg = np.meshgrid(lon, lat)
if self.remapObsClimatologySubtask is not None:
remappedFileName = self.remapObsClimatologySubtask.get_file_name(
stage='remapped', season=season,
comparisonGridName=comparisonGridName)
remappedRefClimatology = xr.open_dataset(remappedFileName)
refOutput = remappedRefClimatology[self.refFieldName].values
if self.maskValue is not None:
refOutput = ma.masked_values(refOutput, self.maskValue)
difference = modelOutput - refOutput
elif self.refConfig is not None:
climatologyName = self.remapMpasClimatologySubtask.climatologyName
remappedFileName = \
get_remapped_mpas_climatology_file_name(
self.refConfig, season=season,
componentName=self.componentName,
climatologyName=climatologyName,
comparisonGridName=comparisonGridName)
remappedRefClimatology = xr.open_dataset(remappedFileName)
refStartYear = self.refConfig.getint('climatology', 'startYear')
refEndYear = self.refConfig.getint('climatology', 'endYear')
if refStartYear != self.startYear or refEndYear != self.endYear:
self.refTitleLabel = '{}\n(years {:04d}-{:04d})'.format(
self.refTitleLabel, refStartYear, refEndYear)
else:
remappedRefClimatology = None
if remappedRefClimatology is None:
refOutput = None
difference = None
else:
refOutput = remappedRefClimatology[self.refFieldName].values
if self.maskValue is not None:
refOutput = ma.masked_values(refOutput, self.maskValue)
difference = modelOutput - refOutput
startYear = self.startYear
endYear = self.endYear
filePrefix = self.filePrefix
title = '{} ({}, years {:04d}-{:04d})'.format(
self.fieldNameInTitle, season, startYear, endYear)
fileout = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
plot_polar_comparison(
config,
lonTarg,
latTarg,
modelOutput,
refOutput,
difference,
sectionName,
title=title,
fileout=fileout,
plotProjection=plotProjection,
latmin=minimumLatitude,
lon0=referenceLongitude,
modelTitle=mainRunName,
refTitle=self.refTitleLabel,
diffTitle=self.diffTitleLabel,
cbarlabel=self.unitsLabel,
vertical=vertical)
write_image_xml(
config,
filePrefix,
componentName='Sea Ice',
componentSubdirectory='sea_ice',
galleryGroup=self.galleryGroup,
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription=season,
imageDescription=self.imageDescription,
imageCaption=self.imageCaption)
def run_task(self): # {{{
"""
Plots time-series output of transport through transects.
"""
# Authors
# -------
# Xylar Asay-Davis, Stephen Price
self.logger.info("\nPlotting time series of transport through "
"{}...".format(self.transect))
self.logger.info(' Load transport data...')
obsDict = {
'Drake Passage': [120, 175],
'Tasmania-Ant': [147, 167],
'Africa-Ant': None,
'Antilles Inflow': [-23.1, -13.7],
'Mona Passage': [-3.8, -1.4],
'Windward Passage': [-7.2, -6.8],
'Florida-Cuba': [30, 33],
'Florida-Bahamas': [30, 33],
'Indonesian Throughflow': [-21, -11],
'Agulhas': [-90, -50],
'Mozambique Channel': [-20, -8],
'Bering Strait': [0.6, 1.0],
'Lancaster Sound': [-1.0, -0.5],
'Fram Strait': [-4.7, 0.7],
'Davis Strait': [-1.6, -3.6],
'Barents Sea Opening': [1.4, 2.6],
'Nares Strait': [-1.8, 0.2]
}
config = self.config
calendar = self.calendar
fcAll = read_feature_collection(self.transportTransectFileName)
fc = FeatureCollection()
for feature in fcAll.features:
if feature['properties']['name'] == self.transect:
fc.add_feature(feature)
break
transport, trans_mean, trans_std = self._load_transport(config)
if self.transect in obsDict:
bounds = obsDict[self.transect]
else:
bounds = None
plotControl = self.controlConfig is not None
mainRunName = config.get('runs', 'mainRunName')
movingAverageMonths = config.getint('timeSeriesTransport',
'movingAverageMonths')
self.logger.info(' Plotting...')
transectName = self.transect.replace('_', ' ')
title = transectName
thumbnailDescription = transectName
xLabel = 'Time (yr)'
yLabel = 'Transport (Sv)'
filePrefix = 'transport_{}'.format(self.transect.replace(' ', '_'))
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
fields = [transport]
lineColors = ['k']
lineWidths = [2.5]
meanString = 'mean={:.2f} $\pm$ {:.2f}'.format(trans_mean, trans_std)
if plotControl:
controlRunName = self.controlConfig.get('runs', 'mainRunName')
ref_transport, ref_mean, ref_std = \
self._load_transport(self.controlConfig)
refMeanString = 'mean={:.2f} $\pm$ {:.2f}'.format(
ref_mean, ref_std)
fields.append(ref_transport)
lineColors.append('r')
lineWidths.append(1.2)
legendText = [
'{} ({})'.format(mainRunName, meanString),
'{} ({})'.format(controlRunName, refMeanString)
]
else:
legendText = [mainRunName]
title = '{} ({})'.format(title, meanString)
if config.has_option(self.taskName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.taskName, 'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.taskName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.taskName, 'yearStrideXTicks')
else:
yearStrideXTicks = None
fig = timeseries_analysis_plot(config,
fields,
calendar=calendar,
title=title,
xlabel=xLabel,
ylabel=yLabel,
movingAveragePoints=movingAverageMonths,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
if bounds is not None:
t = transport.Time.values
plt.gca().fill_between(t,
bounds[0] * numpy.ones_like(t),
bounds[1] * numpy.ones_like(t),
alpha=0.3,
label='observations')
plt.legend(loc='lower left')
# do this before the inset because otherwise it moves the inset
# and cartopy doesn't play too well with tight_layout anyway
plt.tight_layout()
add_inset(fig, fc, width=2.0, height=2.0)
savefig(outFileName)
caption = 'Transport through the {} Transect'.format(transectName)
write_image_xml(config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Transport Time Series',
groupLink='transporttime',
thumbnailDescription=thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
def _plot_transect(self, remappedModelClimatology, remappedRefClimatology):
# {{{
""" plotting the transect """
season = self.season
config = self.config
configSectionName = self.configSectionName
mainRunName = config.get('runs', 'mainRunName')
# broadcast x and z to have the same dimensions
x, z = xr.broadcast(remappedModelClimatology.x,
remappedModelClimatology.z)
# set lat and lon in case we want to plot versus these quantities
lat = remappedModelClimatology.lat
lon = remappedModelClimatology.lon
# convert x, z, lat, and lon to numpy arrays; make a copy because
# they are sometimes read-only (not sure why)
x = x.values.copy().transpose()
z = z.values.copy().transpose()
lat = lat.values.copy().transpose()
lon = lon.values.copy().transpose()
self.lat = lat
self.lon = lon
# This will do strange things at the antemeridian but there's little
# we can do about that.
lon_pm180 = numpy.mod(lon + 180., 360.) - 180.
if self.horizontalBounds is not None:
mask = numpy.logical_and(
remappedModelClimatology.x.values >= self.horizontalBounds[0],
remappedModelClimatology.x.values <= self.horizontalBounds[1])
inset_lon = lon_pm180[mask]
inset_lat = lat[mask]
else:
inset_lon = lon_pm180
inset_lat = lat
fc = FeatureCollection()
fc.add_feature({
"type": "Feature",
"properties": {
"name": self.transectName,
"author": 'Xylar Asay-Davis',
"object": 'transect',
"component": 'ocean',
"tags": ''
},
"geometry": {
"type": "LineString",
"coordinates": list(map(list, zip(inset_lon, inset_lat)))
}
})
# z is masked out with NaNs in some locations (where there is land) but
# this makes pcolormesh unhappy so we'll zero out those locations
z[numpy.isnan(z)] = 0.
modelOutput = nans_to_numpy_mask(
remappedModelClimatology[self.mpasFieldName].values)
modelOutput = modelOutput.transpose()
if remappedRefClimatology is None:
refOutput = None
bias = None
else:
refOutput = remappedRefClimatology[self.refFieldName]
dims = refOutput.dims
refOutput = nans_to_numpy_mask(refOutput.values)
if dims[1] != 'nPoints':
assert (dims[0] == 'nPoints')
refOutput = refOutput.transpose()
bias = modelOutput - refOutput
filePrefix = self.filePrefix
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
title = '{}\n({}, years {:04d}-{:04d})'.format(self.fieldNameInTitle,
season, self.startYear,
self.endYear)
xLabel = 'Distance [km]'
yLabel = 'Depth [m]'
# define the axis labels and the data to use for the upper
# x axis or axes, if such additional axes have been requested
upperXAxes = config.get('transects', 'upperXAxes')
numUpperTicks = config.getint('transects', 'numUpperTicks')
upperXAxisTickLabelPrecision = config.getint(
'transects', 'upperXAxisTickLabelPrecision')
self._set_third_x_axis_to_none()
if upperXAxes == 'neither':
self._set_second_x_axis_to_none()
elif upperXAxes == 'lat':
self._set_second_x_axis_to_latitude()
elif upperXAxes == 'lon':
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'both':
self._set_second_x_axis_to_longitude()
self._set_third_x_axis_to_latitude()
elif upperXAxes == 'greatestExtent':
if self._greatest_extent(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'strictlyMonotonic':
if self._strictly_monotonic(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'mostMonotonic':
if self._most_monotonic(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'mostStepsInSameDirection':
if self._most_steps_in_same_direction(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
elif upperXAxes == 'fewestDirectionChanges':
if self._fewest_direction_changes(lat, lon):
self._set_second_x_axis_to_latitude()
else:
self._set_second_x_axis_to_longitude()
else:
raise ValueError('invalid option for upperXAxes')
# get the parameters determining what type of plot to use,
# what line styles and line colors to use, and whether and how
# to label contours
compareAsContours = config.getboolean('transects',
'compareAsContoursOnSinglePlot')
contourLineStyle = config.get('transects', 'contourLineStyle')
contourLineColor = config.get('transects', 'contourLineColor')
comparisonContourLineStyle = config.get('transects',
'comparisonContourLineStyle')
comparisonContourLineColor = config.get('transects',
'comparisonContourLineColor')
if compareAsContours:
labelContours = config.getboolean(
'transects', 'labelContoursOnContourComparisonPlots')
else:
labelContours = config.getboolean('transects',
'labelContoursOnHeatmaps')
contourLabelPrecision = config.getint('transects',
'contourLabelPrecision')
# construct a three-panel comparison plot for the transect, or a
# single-panel contour comparison plot if compareAsContours is True
fig, axes, suptitle = plot_vertical_section_comparison(
config,
x,
z,
modelOutput,
refOutput,
bias,
configSectionName,
cbarLabel=self.unitsLabel,
xlabel=xLabel,
ylabel=yLabel,
title=title,
modelTitle='{}'.format(mainRunName),
refTitle=self.refTitleLabel,
diffTitle=self.diffTitleLabel,
secondXAxisData=self.secondXAxisData,
secondXAxisLabel=self.secondXAxisLabel,
thirdXAxisData=self.thirdXAxisData,
thirdXAxisLabel=self.thirdXAxisLabel,
numUpperTicks=numUpperTicks,
upperXAxisTickLabelPrecision=upperXAxisTickLabelPrecision,
invertYAxis=False,
backgroundColor='#918167',
xLim=self.horizontalBounds,
compareAsContours=compareAsContours,
lineStyle=contourLineStyle,
lineColor=contourLineColor,
comparisonContourLineStyle=comparisonContourLineStyle,
comparisonContourLineColor=comparisonContourLineColor,
labelContours=labelContours,
contourLabelPrecision=contourLabelPrecision)
# shift the super-title a little to the left to make room for the inset
pos = suptitle.get_position()
suptitle.set_position((pos[0] - 0.05, pos[1]))
# make a red start axis and green end axis to correspond to the dots
# in the inset
for ax in axes:
ax.spines['left'].set_color('red')
ax.spines['right'].set_color('green')
ax.spines['left'].set_linewidth(4)
ax.spines['right'].set_linewidth(4)
add_inset(fig, fc, width=1.5, height=1.5, xbuffer=0.1, ybuffer=0.1)
savefig(outFileName, tight=False)
caption = '{} {}'.format(season, self.imageCaption)
write_image_xml(config,
filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=self.galleryGroup,
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription=self.thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
"""
Make the Hovmoller plot from the time series.
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani, Greg Streletz
self.logger.info("\nPlotting {} time series vs. depth...".format(
self.fieldNameInTitle))
config = self.config
mainRunName = config.get('runs', 'mainRunName')
self.logger.info(' Load ocean data...')
ds = xr.open_dataset(self.inFileName)
if 'regionNames' in ds.coords:
allRegionNames = decode_strings(ds.regionNames)
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = self.regionName.replace('_', ' ')
regionDim = ds.regionNames.dims[0]
else:
plotTitles = config.getExpression('regions', 'plotTitles')
allRegionNames = config.getExpression('regions', 'regions')
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = plotTitles[regionIndex]
regionDim = 'nOceanRegionsTmp'
ds = ds.isel(**{regionDim: regionIndex})
# Note: restart file, not a mesh file because we need refBottomDepth,
# not in a mesh file
try:
restartFile = self.runStreams.readpath('restart')[0]
except ValueError:
raise IOError('No MPAS-O restart file found: need at least one '
'restart file for plotting time series vs. depth')
# Define/read in general variables
self.logger.info(' Read in depth...')
with xr.open_dataset(restartFile) as dsRestart:
# reference depth [m]
depths = dsRestart.refBottomDepth.values
z = np.zeros(depths.shape)
z[0] = -0.5 * depths[0]
z[1:] = -0.5 * (depths[0:-1] + depths[1:])
Time = ds.Time.values
field = ds[self.mpasFieldName].values.transpose()
xLabel = 'Time (years)'
yLabel = 'Depth (m)'
title = '{}, {} \n {}'.format(self.fieldNameInTitle, regionNameInTitle,
mainRunName)
outFileName = '{}/{}.png'.format(self.plotsDirectory, self.filePrefix)
if config.has_option(self.sectionName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.sectionName,
'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.sectionName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.sectionName,
'yearStrideXTicks')
else:
yearStrideXTicks = None
if config.has_option(self.sectionName, 'yLim'):
yLim = config.getExpression(self.sectionName, 'yLim')
else:
yLim = None
plot_vertical_section(config,
Time,
z,
field,
self.sectionName,
suffix='',
colorbarLabel=self.unitsLabel,
title=title,
xlabel=xLabel,
ylabel=yLabel,
lineWidth=1,
xArrayIsTime=True,
calendar=self.calendar,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks,
yLim=yLim,
invertYAxis=False)
savefig(outFileName)
write_image_xml(config=config,
filePrefix=self.filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=self.galleryGroup,
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription='{} {}'.format(
regionNameInTitle, self.thumbnailSuffix),
imageDescription=self.imageCaption,
imageCaption=self.imageCaption)
def run_task(self): # {{{
"""
Plot a depth profile with variability
"""
# Authors
# -------
# Xylar Asay-Davis
config = self.config
startYear = self.startYear
endYear = self.endYear
regionMaskFile = self.masksSubtask.geojsonFileName
fcAll = read_feature_collection(regionMaskFile)
fc = FeatureCollection()
for feature in fcAll.features:
if feature['properties']['name'] == self.regionName:
fc.add_feature(feature)
break
inDirectory = build_config_full_path(config, 'output',
'profilesSubdirectory')
timeSeriesName = self.timeSeriesName
inFileName = '{}/{}_{}_{:04d}-{:04d}.nc'.format(
inDirectory, timeSeriesName, self.season,
self.startYear, self.endYear)
regionGroup = self.masksSubtask.regionGroup
regionGroupSection = 'profiles{}'.format(
regionGroup.replace(' ', ''))
ds = xr.open_dataset(inFileName)
allRegionNames = decode_strings(ds.regionNames)
regionIndex = allRegionNames.index(self.regionName)
ds = ds.isel(nRegions=regionIndex)
meanFieldName = '{}_mean'.format(self.field['prefix'])
stdFieldName = '{}_std'.format(self.field['prefix'])
mainRunName = config.get('runs', 'mainRunName')
profileGalleryGroup = config.get(regionGroupSection,
'profileGalleryGroup')
titleFieldName = self.field['titleName']
regionName = self.regionName.replace('_', ' ')
xLabel = '{} ({})'.format(titleFieldName, self.field['units'])
yLabel = 'depth (m)'
outFileName = '{}/{}.png'.format(self.plotsDirectory, self.filePrefix)
lineColors = ['k']
lineWidths = [1.6]
zArrays = [ds.z.values]
fieldArrays = [ds[meanFieldName].values]
errArrays = [ds[stdFieldName].values]
if self.controlConfig is None:
title = '{} {}, years {:04d}-{:04d}\n{}'.format(
regionName, self.season, startYear, endYear, mainRunName)
legendText = [None]
else:
controlStartYear = self.controlConfig.getint('climatology',
'startYear')
controlEndYear = self.controlConfig.getint('climatology',
'endYear')
controlRunName = self.controlConfig.get('runs', 'mainRunName')
if controlStartYear == startYear and controlEndYear == endYear:
title = '{} {}, years {:04d}-{:04d}'.format(
regionName, self.season, startYear, endYear)
legendText = [mainRunName, controlRunName]
elif mainRunName == controlRunName:
title = '{} {}\n{}'.format(
regionName, self.season, mainRunName)
legendText = ['{:04d}-{:04d}'.format(startYear, endYear),
'{:04d}-{:04d}'.format(controlStartYear,
controlEndYear)]
else:
title = '{} {} '.format(regionName, self.season)
legendText = ['{} {:04d}-{:04d}'.format(mainRunName, startYear,
endYear),
'{} {:04d}-{:04d}'.format(controlRunName,
controlStartYear,
controlEndYear)]
controlDirectory = build_config_full_path(
self.controlConfig, 'output',
'profilesSubdirectory')
controlFileName = \
'{}/{}_{}_{:04d}-{:04d}.nc'.format(
controlDirectory, timeSeriesName, self.season,
controlStartYear, controlEndYear)
dsControl = xr.open_dataset(controlFileName)
allRegionNames = decode_strings(dsControl.regionNames)
regionIndex = allRegionNames.index(self.regionName)
dsControl = dsControl.isel(nRegions=regionIndex)
lineColors.append('r')
lineWidths.append(1.2)
zArrays.append(dsControl.z.values)
fieldArrays.append(dsControl[meanFieldName].values)
errArrays.append(dsControl[stdFieldName].values)
depthRange = config.getExpression(regionGroupSection, 'depthRange')
if len(depthRange) == 0:
depthRange = None
fig = self.plot(zArrays, fieldArrays, errArrays,
lineColors=lineColors, lineWidths=lineWidths,
legendText=legendText, title=title, xLabel=xLabel,
yLabel=yLabel, yLim=depthRange)
# do this before the inset because otherwise it moves the inset
# and cartopy doesn't play too well with tight_layout anyway
plt.tight_layout()
add_inset(fig, fc, width=1.0, height=1.0)
savefig(outFileName, tight=False)
caption = '{} {} vs depth'.format(regionName, titleFieldName)
write_image_xml(
config=config,
filePrefix=self.filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=profileGalleryGroup,
groupLink='ocnregprofs',
imageDescription=caption,
imageCaption=caption,
gallery=titleFieldName,
thumbnailDescription='{} {}'.format(regionName, self.season))
def run_task(self): # {{{
"""
Performs analysis of time series of sea-ice properties.
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani
self.logger.info("\nPlotting sea-ice area and volume time series...")
config = self.config
calendar = self.calendar
sectionName = self.taskName
plotTitles = {'iceArea': 'Sea-ice area',
'iceVolume': 'Sea-ice volume',
'iceThickness': 'Sea-ice mean thickness'}
units = {'iceArea': '[km$^2$]',
'iceVolume': '[10$^3$ km$^3$]',
'iceThickness': '[m]'}
obsFileNames = {
'iceArea': {'NH': build_obs_path(
config, 'seaIce',
relativePathOption='areaNH',
relativePathSection=sectionName),
'SH': build_obs_path(
config, 'seaIce',
relativePathOption='areaSH',
relativePathSection=sectionName)},
'iceVolume': {'NH': build_obs_path(
config, 'seaIce',
relativePathOption='volNH',
relativePathSection=sectionName),
'SH': build_obs_path(
config, 'seaIce',
relativePathOption='volSH',
relativePathSection=sectionName)}}
# Some plotting rules
titleFontSize = config.get('timeSeriesSeaIceAreaVol', 'titleFontSize')
mainRunName = config.get('runs', 'mainRunName')
preprocessedReferenceRunName = \
config.get('runs', 'preprocessedReferenceRunName')
preprocessedReferenceDirectory = \
config.get('seaIcePreprocessedReference', 'baseDirectory')
compareWithObservations = config.getboolean('timeSeriesSeaIceAreaVol',
'compareWithObservations')
movingAveragePoints = config.getint('timeSeriesSeaIceAreaVol',
'movingAveragePoints')
polarPlot = config.getboolean('timeSeriesSeaIceAreaVol', 'polarPlot')
outputDirectory = build_config_full_path(config, 'output',
'timeseriesSubdirectory')
make_directories(outputDirectory)
self.logger.info(' Load sea-ice data...')
# Load mesh
dsTimeSeries = self._compute_area_vol()
yearStart = days_to_datetime(dsTimeSeries['NH'].Time.min(),
calendar=calendar).year
yearEnd = days_to_datetime(dsTimeSeries['NH'].Time.max(),
calendar=calendar).year
timeStart = date_to_days(year=yearStart, month=1, day=1,
calendar=calendar)
timeEnd = date_to_days(year=yearEnd, month=12, day=31,
calendar=calendar)
if preprocessedReferenceRunName != 'None':
# determine if we're beyond the end of the preprocessed data
# (and go ahead and cache the data set while we're checking)
outFolder = '{}/preprocessed'.format(outputDirectory)
make_directories(outFolder)
inFilesPreprocessed = '{}/icevol.{}.year*.nc'.format(
preprocessedReferenceDirectory, preprocessedReferenceRunName)
outFileName = '{}/iceVolume.nc'.format(outFolder)
combine_time_series_with_ncrcat(inFilesPreprocessed,
outFileName,
logger=self.logger)
dsPreprocessed = open_mpas_dataset(fileName=outFileName,
calendar=calendar,
timeVariableNames='xtime')
preprocessedYearEnd = days_to_datetime(dsPreprocessed.Time.max(),
calendar=calendar).year
if yearStart <= preprocessedYearEnd:
dsPreprocessedTimeSlice = \
dsPreprocessed.sel(Time=slice(timeStart, timeEnd))
else:
self.logger.warning('Preprocessed time series ends before the '
'timeSeries startYear and will not be '
'plotted.')
preprocessedReferenceRunName = 'None'
if self.controlConfig is not None:
dsTimeSeriesRef = {}
baseDirectory = build_config_full_path(
self.controlConfig, 'output', 'timeSeriesSubdirectory')
controlRunName = self.controlConfig.get('runs', 'mainRunName')
for hemisphere in ['NH', 'SH']:
inFileName = '{}/seaIceAreaVol{}.nc'.format(baseDirectory,
hemisphere)
dsTimeSeriesRef[hemisphere] = xr.open_dataset(inFileName)
norm = {'iceArea': 1e-6, # m^2 to km^2
'iceVolume': 1e-12, # m^3 to 10^3 km^3
'iceThickness': 1.}
xLabel = 'Time [years]'
galleryGroup = 'Time Series'
groupLink = 'timeseries'
obs = {}
preprocessed = {}
figureNameStd = {}
figureNamePolar = {}
title = {}
plotVars = {}
obsLegend = {}
plotVarsRef = {}
for hemisphere in ['NH', 'SH']:
self.logger.info(' Make {} plots...'.format(hemisphere))
for variableName in ['iceArea', 'iceVolume']:
key = (hemisphere, variableName)
# apply the norm to each variable
plotVars[key] = (norm[variableName] *
dsTimeSeries[hemisphere][variableName])
if self.controlConfig is not None:
plotVarsRef[key] = norm[variableName] * \
dsTimeSeriesRef[hemisphere][variableName]
prefix = '{}/{}{}_{}'.format(self.plotsDirectory,
variableName,
hemisphere,
mainRunName)
figureNameStd[key] = '{}.png'.format(prefix)
figureNamePolar[key] = '{}_polar.png'.format(prefix)
title[key] = '{} ({})'.format(plotTitles[variableName],
hemisphere)
if compareWithObservations:
key = (hemisphere, 'iceArea')
obsLegend[key] = 'SSM/I observations, annual cycle '
if hemisphere == 'NH':
key = (hemisphere, 'iceVolume')
obsLegend[key] = 'PIOMAS, annual cycle (blue)'
if preprocessedReferenceRunName != 'None':
for variableName in ['iceArea', 'iceVolume']:
key = (hemisphere, variableName)
if compareWithObservations:
outFolder = '{}/obs'.format(outputDirectory)
make_directories(outFolder)
outFileName = '{}/iceArea{}.nc'.format(outFolder, hemisphere)
combine_time_series_with_ncrcat(
obsFileNames['iceArea'][hemisphere],
outFileName, logger=self.logger)
dsObs = open_mpas_dataset(fileName=outFileName,
calendar=calendar,
timeVariableNames='xtime')
key = (hemisphere, 'iceArea')
obs[key] = self._replicate_cycle(plotVars[key], dsObs.IceArea,
calendar)
key = (hemisphere, 'iceVolume')
if hemisphere == 'NH':
outFileName = '{}/iceVolume{}.nc'.format(outFolder,
hemisphere)
combine_time_series_with_ncrcat(
obsFileNames['iceVolume'][hemisphere],
outFileName, logger=self.logger)
dsObs = open_mpas_dataset(fileName=outFileName,
calendar=calendar,
timeVariableNames='xtime')
obs[key] = self._replicate_cycle(plotVars[key],
dsObs.IceVol,
calendar)
else:
obs[key] = None
if preprocessedReferenceRunName != 'None':
outFolder = '{}/preprocessed'.format(outputDirectory)
inFilesPreprocessed = '{}/icearea.{}.year*.nc'.format(
preprocessedReferenceDirectory,
preprocessedReferenceRunName)
outFileName = '{}/iceArea.nc'.format(outFolder)
combine_time_series_with_ncrcat(inFilesPreprocessed,
outFileName,
logger=self.logger)
dsPreprocessed = open_mpas_dataset(fileName=outFileName,
calendar=calendar,
timeVariableNames='xtime')
dsPreprocessedTimeSlice = dsPreprocessed.sel(
Time=slice(timeStart, timeEnd))
key = (hemisphere, 'iceArea')
preprocessed[key] = dsPreprocessedTimeSlice[
'icearea_{}'.format(hemisphere.lower())]
inFilesPreprocessed = '{}/icevol.{}.year*.nc'.format(
preprocessedReferenceDirectory,
preprocessedReferenceRunName)
outFileName = '{}/iceVolume.nc'.format(outFolder)
combine_time_series_with_ncrcat(inFilesPreprocessed,
outFileName,
logger=self.logger)
dsPreprocessed = open_mpas_dataset(fileName=outFileName,
calendar=calendar,
timeVariableNames='xtime')
dsPreprocessedTimeSlice = dsPreprocessed.sel(
Time=slice(timeStart, timeEnd))
key = (hemisphere, 'iceVolume')
preprocessed[key] = dsPreprocessedTimeSlice[
'icevolume_{}'.format(hemisphere.lower())]
for variableName in ['iceArea', 'iceVolume']:
key = (hemisphere, variableName)
dsvalues = [plotVars[key]]
legendText = [mainRunName]
lineColors = ['k']
lineWidths = [3]
if compareWithObservations and key in obsLegend.keys():
dsvalues.append(obs[key])
legendText.append(obsLegend[key])
lineColors.append('b')
lineWidths.append(1.2)
if preprocessedReferenceRunName != 'None':
dsvalues.append(preprocessed[key])
legendText.append(preprocessedReferenceRunName)
lineColors.append('purple')
lineWidths.append(1.2)
if self.controlConfig is not None:
dsvalues.append(plotVarsRef[key])
legendText.append(controlRunName)
lineColors.append('r')
lineWidths.append(1.2)
if config.has_option(sectionName, 'firstYearXTicks'):
firstYearXTicks = config.getint(sectionName,
'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(sectionName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(sectionName,
'yearStrideXTicks')
else:
yearStrideXTicks = None
# separate plots for nothern and southern hemispheres
timeseries_analysis_plot(config, dsvalues,
movingAveragePoints,
title[key], xLabel,
units[variableName],
calendar=calendar,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
titleFontSize=titleFontSize,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
savefig(figureNameStd[key])
filePrefix = '{}{}_{}'.format(variableName,
hemisphere,
mainRunName)
thumbnailDescription = '{} {}'.format(
hemisphere, plotTitles[variableName])
caption = 'Running mean of {}'.format(
thumbnailDescription)
write_image_xml(
config,
filePrefix,
componentName='Sea Ice',
componentSubdirectory='sea_ice',
galleryGroup=galleryGroup,
groupLink=groupLink,
thumbnailDescription=thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
if (polarPlot):
timeseries_analysis_plot_polar(
config,
dsvalues,
movingAveragePoints,
title[key],
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
titleFontSize=titleFontSize)
savefig(figureNamePolar[key])
filePrefix = '{}{}_{}_polar'.format(variableName,
hemisphere,
mainRunName)
write_image_xml(
config,
filePrefix,
componentName='Sea Ice',
componentSubdirectory='sea_ice',
galleryGroup=galleryGroup,
groupLink=groupLink,
thumbnailDescription=thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
"""
Plots time-series output of properties in an ocean region.
"""
# Authors
# -------
# Xylar Asay-Davis
self.logger.info("\nPlotting time series of ocean properties of {}"
"...".format(self.regionName))
self.logger.info(' Load time series...')
config = self.config
calendar = self.calendar
regionMaskSuffix = config.getExpression(self.sectionName,
'regionMaskSuffix')
regionMaskFile = get_region_mask(config,
'{}.geojson'.format(regionMaskSuffix))
fcAll = read_feature_collection(regionMaskFile)
fc = FeatureCollection()
for feature in fcAll.features:
if feature['properties']['name'] == self.regionName:
fc.add_feature(feature)
break
baseDirectory = build_config_full_path(config, 'output',
'timeSeriesSubdirectory')
startYear = config.getint('timeSeries', 'startYear')
endYear = config.getint('timeSeries', 'endYear')
regionGroup = self.regionGroup
timeSeriesName = regionGroup[0].lower() + \
regionGroup[1:].replace(' ', '')
inFileName = '{}/{}/{}_{:04d}-{:04d}.nc'.format(
baseDirectory, timeSeriesName, timeSeriesName, startYear, endYear)
dsIn = xarray.open_dataset(inFileName).isel(nRegions=self.regionIndex)
zbounds = dsIn.zbounds.values
controlConfig = self.controlConfig
plotControl = controlConfig is not None
if plotControl:
controlRunName = controlConfig.get('runs', 'mainRunName')
baseDirectory = build_config_full_path(controlConfig, 'output',
'timeSeriesSubdirectory')
startYear = controlConfig.getint('timeSeries', 'startYear')
endYear = controlConfig.getint('timeSeries', 'endYear')
inFileName = '{}/{}/{}_{:04d}-{:04d}.nc'.format(
baseDirectory, timeSeriesName, timeSeriesName, startYear,
endYear)
dsRef = xarray.open_dataset(inFileName).isel(
nRegions=self.regionIndex)
zboundsRef = dsRef.zbounds.values
mainRunName = config.get('runs', 'mainRunName')
movingAverageMonths = 1
self.logger.info(' Make plots...')
groupLink = self.regionGroup[0].lower() + \
self.regionGroup[1:].replace(' ', '')
for var in self.variables:
varName = var['name']
mainArray = dsIn[varName]
is3d = mainArray.attrs['is3d'] == 'True'
if is3d:
title = 'Volume-Mean {} in {}'.format(var['title'],
self.regionName)
else:
title = 'Area-Mean {} in {}'.format(var['title'],
self.regionName)
if plotControl:
refArray = dsRef[varName]
xLabel = 'Time (yr)'
yLabel = '{} ({})'.format(var['title'], var['units'])
filePrefix = '{}_{}'.format(self.prefix, varName)
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
fields = [mainArray]
lineColors = ['k']
lineWidths = [2.5]
legendText = [mainRunName]
if plotControl:
fields.append(refArray)
lineColors.append('r')
lineWidths.append(1.2)
legendText.append(controlRunName)
if is3d:
if not plotControl or numpy.all(zbounds == zboundsRef):
title = '{} ({} < z < {} m)'.format(
title, zbounds[0], zbounds[1])
else:
legendText[0] = '{} ({} < z < {} m)'.format(
legendText[0], zbounds[0], zbounds[1])
legendText[1] = '{} ({} < z < {} m)'.format(
legendText[1], zboundsRef[0], zboundsRef[1])
fig = timeseries_analysis_plot(
config,
fields,
calendar=calendar,
title=title,
xlabel=xLabel,
ylabel=yLabel,
movingAveragePoints=movingAverageMonths,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText)
# do this before the inset because otherwise it moves the inset
# and cartopy doesn't play too well with tight_layout anyway
plt.tight_layout()
add_inset(fig, fc, width=2.0, height=2.0)
savefig(outFileName, tight=False)
caption = 'Regional mean of {}'.format(title)
write_image_xml(config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='{} Time Series'.format(
self.regionGroup),
groupLink=groupLink,
gallery=var['title'],
thumbnailDescription=self.regionName,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
"""
Performs analysis of sea-ice properties by comparing with
previous model results and/or observations.
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani
config = self.config
season = self.season
comparisonGridName = self.comparisonGridName
self.logger.info("\nPlotting 2-d maps of {} climatologies for "
"{} against {}...".format(self.fieldNameInTitle,
season, self.refTitleLabel))
mainRunName = config.get('runs', 'mainRunName')
startYear = self.startYear
endYear = self.endYear
hemisphere = self.hemisphere
sectionName = self.taskName
vertical = config.getboolean(sectionName, 'vertical')
if hemisphere == 'NH':
plotProjection = 'npstere'
else:
plotProjection = 'spstere'
referenceLongitude = config.getfloat(sectionName, 'referenceLongitude')
minimumLatitude = config.getfloat(sectionName, 'minimumLatitude')
remappedFileName = \
self.remapMpasClimatologySubtask.get_remapped_file_name(
season=season, comparisonGridName=comparisonGridName)
remappedClimatology = xr.open_dataset(remappedFileName)
modelOutput = remappedClimatology[self.mpasFieldName].values
# mask nans
modelOutput = np.ma.masked_array(modelOutput, np.isnan(modelOutput))
lon = remappedClimatology['lon'].values
lat = remappedClimatology['lat'].values
if self.remapObsClimatologySubtask is not None:
remappedFileName = self.remapObsClimatologySubtask.get_file_name(
stage='remapped',
season=season,
comparisonGridName=comparisonGridName)
remappedRefClimatology = xr.open_dataset(remappedFileName)
elif self.controlConfig is not None:
climatologyName = self.remapMpasClimatologySubtask.climatologyName
remappedFileName = \
get_remapped_mpas_climatology_file_name(
self.controlConfig, season=season,
componentName=self.componentName,
climatologyName=climatologyName,
comparisonGridName=comparisonGridName,
op=self.remapMpasClimatologySubtask.op)
remappedRefClimatology = xr.open_dataset(remappedFileName)
controlStartYear = self.controlConfig.getint(
'climatology', 'startYear')
controlEndYear = self.controlConfig.getint('climatology',
'endYear')
if controlStartYear != self.startYear or \
controlEndYear != self.endYear:
self.refTitleLabel = '{}\n(years {:04d}-{:04d})'.format(
self.refTitleLabel, controlStartYear, controlEndYear)
else:
remappedRefClimatology = None
if remappedRefClimatology is None:
refOutput = None
difference = None
else:
refOutput = remappedRefClimatology[self.refFieldName].values
# mask nans
refOutput = np.ma.masked_array(refOutput, np.isnan(refOutput))
difference = modelOutput - refOutput
# mask with maskValue only after taking the diff
if self.maskValue is not None:
mask = np.logical_or(refOutput.mask,
refOutput == self.maskValue)
refOutput = np.ma.masked_array(refOutput, mask)
difference = np.ma.masked_array(difference, mask)
# mask with maskValue only after taking the diff
if self.maskValue is not None:
mask = np.logical_or(modelOutput.mask,
modelOutput == self.maskValue)
modelOutput = np.ma.masked_array(modelOutput, mask)
# for log plots, make sure the data is all positive to avoid masking
if config.has_option(sectionName, 'normTypeResult'):
normType = config.get(sectionName, 'normTypeResult')
normArgs = config.getExpression(sectionName, 'normArgsResult')
if normType == 'log':
epsilon = 1e-2 * normArgs['vmin']
modelOutput = np.maximum(modelOutput, epsilon)
if refOutput is not None:
refOutput = np.maximum(refOutput, epsilon)
startYear = self.startYear
endYear = self.endYear
filePrefix = self.filePrefix
title = '{} ({}, years {:04d}-{:04d})'.format(self.fieldNameInTitle,
season, startYear,
endYear)
fileout = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
plot_polar_comparison(config,
lon,
lat,
modelOutput,
refOutput,
difference,
sectionName,
title=title,
fileout=fileout,
plotProjection=plotProjection,
latmin=minimumLatitude,
lon0=referenceLongitude,
modelTitle=mainRunName,
refTitle=self.refTitleLabel,
diffTitle=self.diffTitleLabel,
cbarlabel=self.unitsLabel,
vertical=vertical)
write_image_xml(config,
filePrefix,
componentName='Sea Ice',
componentSubdirectory='sea_ice',
galleryGroup=self.galleryGroup,
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription=season,
imageDescription=self.imageDescription,
imageCaption=self.imageCaption)
def run_task(self): # {{{
"""
Plots time-series output of properties in an ocean region.
"""
# Authors
# -------
# Xylar Asay-Davis
self.logger.info("\nPlotting TS diagram for {}"
"...".format(self.regionName))
register_custom_colormaps()
config = self.config
sectionName = self.sectionName
startYear = self.mpasClimatologyTask.startYear
endYear = self.mpasClimatologyTask.endYear
regionMaskSuffix = config.getExpression(sectionName,
'regionMaskSuffix')
regionMaskFile = get_region_mask(config,
'{}.geojson'.format(regionMaskSuffix))
fcAll = read_feature_collection(regionMaskFile)
fc = FeatureCollection()
for feature in fcAll.features:
if feature['properties']['name'] == self.regionName:
fc.add_feature(feature)
break
self.logger.info(' Make plots...')
groupLink = 'tsDiag' + self.regionGroup[0].lower() + \
self.regionGroup[1:].replace(' ', '')
nSubplots = 1 + len(self.obsDicts)
if self.controlConfig is not None:
nSubplots += 1
if nSubplots == 4:
nCols = 2
nRows = 2
else:
nCols = min(nSubplots, 3)
nRows = (nSubplots - 1) // 3 + 1
axisIndices = numpy.reshape(numpy.arange(nRows * nCols),
(nRows, nCols))[::-1, :].ravel()
titleFontSize = config.get('plot', 'titleFontSize')
axis_font = {'size': config.get('plot', 'axisFontSize')}
title_font = {
'size': titleFontSize,
'color': config.get('plot', 'titleFontColor'),
'weight': config.get('plot', 'titleFontWeight')
}
width = 3 + 4.5 * nCols
height = 2 + 4 * nRows
# noinspection PyTypeChecker
fig, axarray = plt.subplots(nrows=nRows,
ncols=nCols,
sharey=True,
figsize=(width, height))
if nSubplots == 1:
axarray = numpy.array(axarray)
if nRows == 1:
axarray = axarray.reshape((nRows, nCols))
T, S, zMid, volume, zmin, zmax = self._get_mpas_t_s(self.config)
mainRunName = config.get('runs', 'mainRunName')
plotFields = [{
'S': S,
'T': T,
'z': zMid,
'vol': volume,
'title': mainRunName
}]
if self.controlConfig is not None:
T, S, zMid, volume, _, _ = self._get_mpas_t_s(self.controlConfig)
controlRunName = self.controlConfig.get('runs', 'mainRunName')
plotFields.append({
'S': S,
'T': T,
'z': zMid,
'vol': volume,
'title': 'Control: {}'.format(controlRunName)
})
for obsName in self.obsDicts:
obsT, obsS, obsZ, obsVol = self._get_obs_t_s(
self.obsDicts[obsName])
plotFields.append({
'S': obsS,
'T': obsT,
'z': obsZ,
'vol': obsVol,
'title': obsName
})
Tbins = config.getExpression(sectionName, 'Tbins', usenumpyfunc=True)
Sbins = config.getExpression(sectionName, 'Sbins', usenumpyfunc=True)
normType = config.get(sectionName, 'normType')
PT, SP = numpy.meshgrid(Tbins, Sbins)
SA = gsw.SA_from_SP(SP, p=0., lon=0., lat=-75.)
CT = gsw.CT_from_t(SA, PT, p=0.)
neutralDensity = sigma0(SA, CT)
rhoInterval = config.getfloat(sectionName, 'rhoInterval')
contours = numpy.arange(24., 29. + rhoInterval, rhoInterval)
diagramType = config.get(sectionName, 'diagramType')
if diagramType not in ['volumetric', 'scatter']:
raise ValueError('Unexpected diagramType {}'.format(diagramType))
lastPanel = None
volMinMpas = None
volMaxMpas = None
for index in range(len(axisIndices)):
panelIndex = axisIndices[index]
row = nRows - 1 - index // nCols
col = numpy.mod(index, nCols)
if panelIndex >= nSubplots:
plt.delaxes(axarray[row, col])
continue
plt.sca(axarray[row, col])
T = plotFields[index]['T']
S = plotFields[index]['S']
z = plotFields[index]['z']
volume = plotFields[index]['vol']
title = plotFields[index]['title']
CS = plt.contour(SP,
PT,
neutralDensity,
contours,
linewidths=1.,
colors='k',
zorder=2)
plt.clabel(CS, fontsize=12, inline=1, fmt='%4.2f')
if diagramType == 'volumetric':
lastPanel, volMin, volMax = \
self._plot_volumetric_panel(T, S, volume)
if index == 0:
volMinMpas = volMin
volMaxMpas = volMax
if normType == 'linear':
norm = colors.Normalize(vmin=0., vmax=volMaxMpas)
elif normType == 'log':
if volMinMpas is None or volMaxMpas is None:
norm = None
else:
norm = colors.LogNorm(vmin=volMinMpas, vmax=volMaxMpas)
else:
raise ValueError(
'Unsupported normType {}'.format(normType))
if norm is not None:
lastPanel.set_norm(norm)
else:
lastPanel = self._plot_scatter_panel(T, S, z, zmin, zmax)
CTFreezing = freezing.CT_freezing(Sbins, 0, 1)
PTFreezing = gsw.t_from_CT(gsw.SA_from_SP(Sbins,
p=0.,
lon=0.,
lat=-75.),
CTFreezing,
p=0.)
plt.plot(Sbins,
PTFreezing,
linestyle='--',
linewidth=1.,
color='k')
plt.ylim([Tbins[0], Tbins[-1]])
plt.xlim([Sbins[0], Sbins[-1]])
plt.xlabel('Salinity (PSU)', **axis_font)
if col == 0:
plt.ylabel(r'Potential temperature ($^\circ$C)', **axis_font)
plt.title(title)
# do this before the inset because otherwise it moves the inset
# and cartopy doesn't play too well with tight_layout anyway
plt.tight_layout()
fig.subplots_adjust(right=0.91)
if nRows == 1:
fig.subplots_adjust(top=0.85)
else:
fig.subplots_adjust(top=0.88)
suptitle = 'T-S diagram for {} ({}, {:04d}-{:04d})\n' \
' {} m < z < {} m'.format(self.regionName, self.season,
startYear, endYear, zmin, zmax)
fig.text(0.5,
0.9,
suptitle,
horizontalalignment='center',
**title_font)
inset = add_inset(fig, fc, width=1.5, height=1.5)
# move the color bar down a little ot avoid the inset
pos0 = inset.get_position()
pos1 = axarray[-1, -1].get_position()
pad = 0.04
top = pos0.y0 - pad
height = top - pos1.y0
cbar_ax = fig.add_axes([0.92, pos1.y0, 0.02, height])
cbar = fig.colorbar(lastPanel, cax=cbar_ax)
if diagramType == 'volumetric':
cbar.ax.get_yaxis().labelpad = 15
cbar.ax.set_ylabel(r'volume (m$^3$)', rotation=270)
else:
cbar.ax.set_ylabel('depth (m)', rotation=270)
outFileName = '{}/TS_diagram_{}_{}.png'.format(self.plotsDirectory,
self.prefix,
self.season)
savefig(outFileName, tight=False)
caption = 'Regional mean of {}'.format(suptitle)
write_image_xml(config=config,
filePrefix='TS_diagram_{}_{}'.format(
self.prefix, self.season),
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='T-S Diagrams',
groupLink=groupLink,
gallery=self.regionGroup,
thumbnailDescription=self.regionName,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
"""
Make the Hovmoller plot from the time series.
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani, Greg Streletz
self.logger.info("\nPlotting {} time series vs. depth...".format(
self.fieldNameInTitle))
config = self.config
mainRunName = config.get('runs', 'mainRunName')
self.logger.info(' Load ocean data...')
ds = xr.open_dataset(self.inFileName)
if 'regionNames' in ds.coords:
allRegionNames = decode_strings(ds.regionNames)
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = self.regionName.replace('_', ' ')
regionDim = ds.regionNames.dims[0]
else:
plotTitles = config.getExpression('regions', 'plotTitles')
allRegionNames = config.getExpression('regions', 'regions')
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = plotTitles[regionIndex]
regionDim = 'nOceanRegionsTmp'
ds = ds.isel(**{regionDim: regionIndex})
# Note: restart file, not a mesh file because we need refBottomDepth,
# not in a mesh file
try:
restartFile = self.runStreams.readpath('restart')[0]
except ValueError:
raise IOError('No MPAS-O restart file found: need at least one '
'restart file for plotting time series vs. depth')
# Define/read in general variables
self.logger.info(' Read in depth...')
with xr.open_dataset(restartFile) as dsRestart:
# reference depth [m]
depths = dsRestart.refBottomDepth.values
z = np.zeros(depths.shape)
z[0] = -0.5 * depths[0]
z[1:] = -0.5 * (depths[0:-1] + depths[1:])
Time = ds.Time.values
field = ds[self.mpasFieldName].values.transpose()
xLabel = 'Time (years)'
yLabel = 'Depth (m)'
title = '{}, {}'.format(self.fieldNameInTitle, regionNameInTitle)
outFileName = '{}/{}.png'.format(self.plotsDirectory, self.filePrefix)
if config.has_option(self.sectionName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.sectionName,
'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.sectionName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.sectionName,
'yearStrideXTicks')
else:
yearStrideXTicks = None
movingAverageMonths = config.getWithDefault(self.sectionName,
'movingAverageMonths', 1)
if config.has_option(self.sectionName, 'yLim'):
yLim = config.getExpression(self.sectionName, 'yLim')
else:
yLim = None
if self.controlConfig is None:
refField = None
diff = None
refTitle = None
diffTitle = None
else:
controlConfig = self.controlConfig
dsRef = xr.open_dataset(self.controlFileName)
if 'regionNames' in dsRef.coords:
allRegionNames = decode_strings(dsRef.regionNames)
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = self.regionName.replace('_', ' ')
regionDim = dsRef.regionNames.dims[0]
else:
plotTitles = controlConfig.getExpression(
'regions', 'plotTitles')
allRegionNames = controlConfig.getExpression(
'regions', 'regions')
regionIndex = allRegionNames.index(self.regionName)
regionNameInTitle = plotTitles[regionIndex]
regionDim = 'nOceanRegionsTmp'
dsRef = dsRef.isel(**{regionDim: regionIndex})
refField = dsRef[self.mpasFieldName].values.transpose()
assert (field.shape == refField.shape)
diff = field - refField
refTitle = self.controlConfig.get('runs', 'mainRunName')
diffTitle = 'Main - Control'
fig, _, suptitle = plot_vertical_section_comparison(
config,
Time,
z,
field,
refField,
diff,
self.sectionName,
colorbarLabel=self.unitsLabel,
title=title,
modelTitle=mainRunName,
refTitle=refTitle,
diffTitle=diffTitle,
xlabel=xLabel,
ylabel=yLabel,
lineWidth=1,
xArrayIsTime=True,
movingAveragePoints=movingAverageMonths,
calendar=self.calendar,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks,
yLim=yLim,
invertYAxis=False)
if self.regionMaskFile is not None:
# shift the super-title a little to the left to make room for the
# inset
pos = suptitle.get_position()
suptitle.set_position((pos[0] - 0.05, pos[1]))
fcAll = read_feature_collection(self.regionMaskFile)
fc = FeatureCollection()
for feature in fcAll.features:
if feature['properties']['name'] == self.regionName:
fc.add_feature(feature)
break
add_inset(fig, fc, width=1.0, height=1.0, xbuffer=0.1, ybuffer=0.1)
savefig(outFileName, tight=False)
else:
savefig(outFileName)
write_image_xml(config=config,
filePrefix=self.filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=self.galleryGroup,
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription='{} {}'.format(
regionNameInTitle, self.thumbnailSuffix),
imageDescription=self.imageCaption,
imageCaption=self.imageCaption)
def _plot_transect(self, remappedModelClimatology, remappedRefClimatology):
# {{{
""" plotting the transect """
season = self.season
config = self.config
configSectionName = self.configSectionName
mainRunName = config.get('runs', 'mainRunName')
# broadcast x and z to have the same dimensions
x, z = xr.broadcast(remappedModelClimatology.x,
remappedModelClimatology.z)
# convert x and z to numpy arrays, make a copy because they are
# sometimes read-only (not sure why)
x = x.values.copy().transpose()
z = z.values.copy().transpose()
# z is masked out with NaNs in some locations (where there is land) but
# this makes pcolormesh unhappy so we'll zero out those locations
z[numpy.isnan(z)] = 0.
modelOutput = nans_to_numpy_mask(
remappedModelClimatology[self.mpasFieldName].values)
modelOutput = modelOutput.transpose()
if remappedRefClimatology is None:
refOutput = None
bias = None
else:
refOutput = remappedRefClimatology[self.refFieldName]
dims = refOutput.dims
refOutput = nans_to_numpy_mask(refOutput.values)
if dims[1] != 'nPoints':
assert (dims[0] == 'nPoints')
refOutput = refOutput.transpose()
bias = modelOutput - refOutput
filePrefix = self.filePrefix
outFileName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
title = '{}\n({}, years {:04d}-{:04d})'.format(self.fieldNameInTitle,
season, self.startYear,
self.endYear)
# construct a three-panel comparison plot for the transect
xLabel = 'Distance [km]'
yLabel = 'Depth [m]'
plot_vertical_section_comparison(config,
x,
z,
modelOutput,
refOutput,
bias,
outFileName,
configSectionName,
cbarLabel=self.unitsLabel,
xlabel=xLabel,
ylabel=yLabel,
title=title,
modelTitle='{}'.format(mainRunName),
refTitle=self.refTitleLabel,
diffTitle=self.diffTitleLabel,
invertYAxis=False,
backgroundColor='#918167')
caption = '{} {}'.format(season, self.imageCaption)
write_image_xml(config,
filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup=self.galleryGroup,
groupSubtitle=self.groupSubtitle,
groupLink=self.groupLink,
gallery=self.galleryName,
thumbnailDescription=self.thumbnailDescription,
imageDescription=caption,
imageCaption=caption)
def run_task(self): # {{{
"""
Performs analysis of the time-series output of sea-surface temperature
(SST).
"""
# Authors
# -------
# Xylar Asay-Davis, Milena Veneziani
self.logger.info("\nPlotting SST time series...")
self.logger.info(' Load SST data...')
config = self.config
calendar = self.calendar
mainRunName = config.get('runs', 'mainRunName')
preprocessedReferenceRunName = \
config.get('runs', 'preprocessedReferenceRunName')
preprocessedInputDirectory = config.get('oceanPreprocessedReference',
'baseDirectory')
movingAveragePoints = config.getint('timeSeriesSST',
'movingAveragePoints')
regions = config.getExpression('regions', 'regions')
plotTitles = config.getExpression('regions', 'plotTitles')
regionsToPlot = config.getExpression('timeSeriesSST', 'regions')
regionIndicesToPlot = [
regions.index(region) for region in regionsToPlot
]
outputDirectory = build_config_full_path(config, 'output',
'timeseriesSubdirectory')
make_directories(outputDirectory)
dsSST = open_mpas_dataset(fileName=self.inputFile,
calendar=calendar,
variableList=self.variableList,
startDate=self.startDate,
endDate=self.endDate)
yearStart = days_to_datetime(dsSST.Time.min(), calendar=calendar).year
yearEnd = days_to_datetime(dsSST.Time.max(), calendar=calendar).year
timeStart = date_to_days(year=yearStart,
month=1,
day=1,
calendar=calendar)
timeEnd = date_to_days(year=yearEnd,
month=12,
day=31,
calendar=calendar)
if self.refConfig is not None:
baseDirectory = build_config_full_path(self.refConfig, 'output',
'timeSeriesSubdirectory')
refFileName = '{}/{}.nc'.format(
baseDirectory, self.mpasTimeSeriesTask.fullTaskName)
refStartYear = self.refConfig.getint('timeSeries', 'startYear')
refEndYear = self.refConfig.getint('timeSeries', 'endYear')
refStartDate = '{:04d}-01-01_00:00:00'.format(refStartYear)
refEndDate = '{:04d}-12-31_23:59:59'.format(refEndYear)
dsRefSST = open_mpas_dataset(fileName=refFileName,
calendar=calendar,
variableList=self.variableList,
startDate=refStartDate,
endDate=refEndDate)
else:
dsRefSST = None
if preprocessedReferenceRunName != 'None':
self.logger.info(' Load in SST for a preprocesses reference '
'run...')
inFilesPreprocessed = '{}/SST.{}.year*.nc'.format(
preprocessedInputDirectory, preprocessedReferenceRunName)
outFolder = '{}/preprocessed'.format(outputDirectory)
make_directories(outFolder)
outFileName = '{}/sst.nc'.format(outFolder)
combine_time_series_with_ncrcat(inFilesPreprocessed,
outFileName,
logger=self.logger)
dsPreprocessed = open_mpas_dataset(fileName=outFileName,
calendar=calendar,
timeVariableNames='xtime')
yearEndPreprocessed = days_to_datetime(dsPreprocessed.Time.max(),
calendar=calendar).year
if yearStart <= yearEndPreprocessed:
dsPreprocessedTimeSlice = \
dsPreprocessed.sel(Time=slice(timeStart, timeEnd))
else:
self.logger.warning('Preprocessed time series ends before the '
'timeSeries startYear and will not be '
'plotted.')
preprocessedReferenceRunName = 'None'
self.logger.info(' Make plots...')
for regionIndex in regionIndicesToPlot:
region = regions[regionIndex]
title = '{} SST'.format(plotTitles[regionIndex])
xLabel = 'Time [years]'
yLabel = '[$\degree$C]'
varName = self.variableList[0]
SST = dsSST[varName].isel(nOceanRegions=regionIndex)
filePrefix = self.filePrefixes[region]
figureName = '{}/{}.png'.format(self.plotsDirectory, filePrefix)
lineColors = ['k']
lineWidths = [3]
fields = [SST]
legendText = [mainRunName]
if dsRefSST is not None:
refSST = dsRefSST[varName].isel(nOceanRegions=regionIndex)
fields.append(refSST)
lineColors.append('r')
lineWidths.append(1.5)
refRunName = self.refConfig.get('runs', 'mainRunName')
legendText.append(refRunName)
if preprocessedReferenceRunName != 'None':
SST_v0 = dsPreprocessedTimeSlice.SST
fields.append(SST_v0)
lineColors.append('purple')
lineWidths.append(1.5)
legendText.append(preprocessedReferenceRunName)
if config.has_option(self.taskName, 'firstYearXTicks'):
firstYearXTicks = config.getint(self.taskName,
'firstYearXTicks')
else:
firstYearXTicks = None
if config.has_option(self.taskName, 'yearStrideXTicks'):
yearStrideXTicks = config.getint(self.taskName,
'yearStrideXTicks')
else:
yearStrideXTicks = None
timeseries_analysis_plot(config,
fields,
movingAveragePoints,
title,
xLabel,
yLabel,
figureName,
calendar=calendar,
lineColors=lineColors,
lineWidths=lineWidths,
legendText=legendText,
firstYearXTicks=firstYearXTicks,
yearStrideXTicks=yearStrideXTicks)
caption = 'Running Mean of {} Sea Surface Temperature'.format(
region)
write_image_xml(config=config,
filePrefix=filePrefix,
componentName='Ocean',
componentSubdirectory='ocean',
galleryGroup='Time Series',
groupLink='timeseries',
thumbnailDescription='{} SST'.format(region),
imageDescription=caption,
imageCaption=caption)