def setup(world, body, mass, space, g_world, body_geom, i, c1, boat_model):
world.setGravity((0, 0, -9.81))
# this is the mass of the boat "boat_mass", this also sets the inertia based on a box with length_x, length_y, length_z
mass.setBoxTotal(boat_mass, boat_length, boat_width, boat_height)
body.setMass(mass)
body.setPosition(initial_position)
# the last unit is the initial rotation of the body position in radians
body.setQuaternion(smh.axisangle_to_quat(v(0, 0, 1), math.pi))
#body.setQuaternion(smh.axisangle_to_quat(v(0, 0, 1), 0))
body_geom.setBody(body)
lake_mesh = srh.mesh_from_obj(roslib.packages.resource_file('murph_sim_model', 'models', 'lake.obj'))
lake_geom = ode.GeomTriMesh(lake_mesh.ode_trimeshdata, space)
# TODO: Add obstacles here
g_world.objs.append(lake_mesh)
g_world.objs.append(boat_model)
g_world.objs.append(srh.VectorField(get_water_vel))
geoms = []
buoy_list = [v(54.5, -33.9, 0), v(53.5, -37.4, 0), v(38.0, -29.6, 0), v(35.7, -33.5, 0)]
for pos in buoy_list:
newbuoy_mesh = srh.mesh_from_obj(roslib.packages.resource_file('murph_sim_model', 'models', 'green_buoy.obj'))
newbuoy_mesh = newbuoy_mesh.translate(pos)
g_world.objs.append(newbuoy_mesh)
geoms.append(ode.GeomTriMesh(newbuoy_mesh.ode_trimeshdata, space))
i.init(g_world)
def get_water_vel(self, pos):
return v(0, 0, 0)
return (pos % v(0, 0, 1))*math.e**(-pos.mag()/3)
def world_tick(self):
#if random.randrange(10) == 0:
#boat_lidar.get_lidar_range() # Use and publish whoa!
water_vel = self.get_water_vel(V(body.getPosition()))
body.addForceAtRelPos((0, 0, self.buoyancy_force(-body.getPosition()[2], 0.22728849402137372)), (0, 0, .1))
# the following frictional forces are from darsen's models
#frictional force opposite to the velocity of the boat
body_velocity=body.vectorFromWorld(body.getLinearVel())
# adds a resistance force for the water proportional to the velocity (where [0] is x, [1] is y, and [2] is z). units in N/(m/s)
friction_force_forward=self.friction_coefficient_forward*body_velocity[0]-self.friction_coefficient_forward_reduction*(-1.0*pow(body_velocity[0],2) if body_velocity[0]<0.0 else pow(body_velocity[0],2))
friction_force_lateral=self.friction_coefficient_lateral*body_velocity[1]-self.friction_coefficient_lateral_reduction*(-1.0*pow(body_velocity[1],2) if body_velocity[1]<0.0 else pow(body_velocity[1],2))
body.addRelForce([-friction_force_forward,-friction_force_lateral,body_velocity[2]*-40])
# adds a angular resistance force for the water proportional to the velocity
# angular_velocity is a 3-tuple ([0]=roll,[1]=pitch,[2]=yaw)
angular_velocity=body.vectorFromWorld(body.getAngularVel())
friction_force_roll=self.friction_coefficient_rotational*angular_velocity[0]-self.friction_coefficient_rotational_reduction*(-1.0*pow(angular_velocity[0],2) if angular_velocity[0]<0.0 else pow(angular_velocity[0],2))
friction_force_pitch=self.friction_coefficient_rotational*angular_velocity[1]-self.friction_coefficient_rotational_reduction*(-1.0*pow(angular_velocity[1],2) if angular_velocity[1]<0.0 else pow(angular_velocity[1],2))
friction_force_yaw=self.friction_coefficient_rotational*angular_velocity[2]-self.friction_coefficient_rotational_reduction*(-1.0*pow(angular_velocity[2],2) if angular_velocity[2]<0.0 else pow(angular_velocity[2],2))
body.addRelTorque([-friction_force_roll,-friction_force_pitch,-friction_force_yaw])
print "forward: ", friction_force_forward, " lateral: ", friction_force_lateral, " rotational: ", -friction_force_yaw
#print thrusters
# map the thrusters position on the boat
self.boat_model.vectors = []
# id2=starboard, id3=port
if not self.killed:
for thruster_id in [2, 3]:
# set the thrusters position on the boat
relpos = v(self.starboard_servo_x_offset, self.starboard_servo_y_offset, 0) if thruster_id == 2 else v(self.port_servo_x_offset, self.port_servo_y_offset, 0)
angle = 0
reldir = v(math.cos(angle), math.sin(angle), 0)
force = self.thrusts[thruster_id]
body.addRelForceAtRelPos(reldir*force, relpos)
self.boat_model.vectors.append((relpos, relpos - .02*reldir*force))
print "force: ", force, " angle: ", angle
keys = pygame.key.get_pressed()
for keycode, force in [
(pygame.K_k, v(-50, 0, 0)),
(pygame.K_i, v(+50, 0, 0)),
(pygame.K_j, v(0, +50, 0)),
(pygame.K_l, v(0, -50, 0)),
(pygame.K_o, v(0, 0, +50)),
(pygame.K_m, v(0, 0, -50)),
]:
if keys[keycode]:
body.addRelForce(force*(10 if keys[pygame.K_RSHIFT] else 1)*(.1 if keys[pygame.K_RCTRL] else 1))
for keycode, torque in [
(pygame.K_COMMA, v(-20, 0, 0)),
(pygame.K_u, v(+20, 0, 0)),
(pygame.K_h, v(0, +20, 0)),
(pygame.K_SEMICOLON, v(0, -20, 0)),
(pygame.K_0, v(0, 0, +20)),
(pygame.K_n, v(0, 0, -20)),
]:
if keys[keycode]:
body.addRelTorque(torque*(10 if keys[pygame.K_RSHIFT] else 1)*(.1 if keys[pygame.K_RCTRL] else 1))
if keys[pygame.K_1]:
self.killed = True
if keys[pygame.K_2]:
self.killed = False
global locked
if keys[pygame.K_3]:
locked = True
if keys[pygame.K_4]:
locked = False
contactgroup = ode.JointGroup()
if self.locked:
j = ode.FixedJoint(world, contactgroup)
j.attach(body, None)
j.setFixed()
near_pairs = []
space.collide(None, lambda _, geom1, geom2: near_pairs.append((geom1, geom2)))
for geom1, geom2 in near_pairs:
for contact in ode.collide(geom1, geom2):
contact.setBounce(0.2)
contact.setMu(5000)
j = ode.ContactJoint(world, contactgroup, contact)
j.attach(geom1.getBody(), geom2.getBody())
dt = 1/30
self.world_time += dt
world.step(dt)
contactgroup.empty()
pos = body.getPosition()
q = V(body.getQuaternion())
# Publish tf /enu
self.enu_tf_br.sendTransform(
translation = (pos[0], pos[1], pos[2]),
rotation = (q[1], q[2], q[3], q[0]),
time = rospy.Time(self.world_time),
child = '/base_link',
parent = '/enu')
# Publish odom
msg = Odometry()
msg.header.stamp = rospy.Time(self.world_time)
msg.header.frame_id = '/enu'
msg.child_frame_id = '/base_link'
msg.pose.pose.position = Point(*pos)
msg.pose.pose.orientation = Quaternion(q[1], q[2], q[3], q[0])
msg.twist.twist.linear = Vector3(*q.conj().quat_rot(body.getLinearVel()))
msg.twist.twist.angular = Vector3(*q.conj().quat_rot(body.getAngularVel()))
self.odom_pub.publish(msg)
# XXX
msg = Odometry()
msg.header.stamp = rospy.Time(self.world_time)
msg.header.frame_id = '/ecef'
msg.child_frame_id = '/base_link'
# ecef_loc = gps.ecef_from_latlongheight(math.radians(36.802002), math.radians(-76.191019), 7)
enu_loc = numpy.array([53.6686215007, -20.8502282916, -0.0733864689281])
# msg.pose.pose.position = Point(*gps.ecef_from_enu(enu_v=body.getPosition() - enu_loc, ecef_pos=ecef_loc) + ecef_loc)
self.abs_odom_pub.publish(msg)
reactor.callLater(max(0, self.world_time + dt - reactor.seconds()), self.world_tick)