def _inject(self, fileobj, padding_func):
"""Write tag data into the FLAC Vorbis comment packet/page."""
# Ogg FLAC has no convenient data marker like Vorbis, but the
# second packet - and second page - must be the comment data.
fileobj.seek(0)
page = OggPage(fileobj)
while not page.packets[0].startswith(b"\x7FFLAC"):
page = OggPage(fileobj)
first_page = page
while not (page.sequence == 1 and page.serial == first_page.serial):
page = OggPage(fileobj)
old_pages = [page]
while not (old_pages[-1].complete or len(old_pages[-1].packets) > 1):
page = OggPage(fileobj)
if page.serial == first_page.serial:
old_pages.append(page)
packets = OggPage.to_packets(old_pages, strict=False)
# Set the new comment block.
data = self.write(framing=False)
data = packets[0][:1] + struct.pack(">I", len(data))[-3:] + data
packets[0] = data
new_pages = OggPage.from_packets(packets, old_pages[0].sequence)
OggPage.replace(fileobj, old_pages, new_pages)
def _inject(self, fileobj, padding_func):
"""Write tag data into the Theora comment packet/page."""
fileobj.seek(0)
page = OggPage(fileobj)
while not page.packets[0].startswith(b"\x81theora"):
page = OggPage(fileobj)
old_pages = [page]
while not (old_pages[-1].complete or len(old_pages[-1].packets) > 1):
page = OggPage(fileobj)
if page.serial == old_pages[0].serial:
old_pages.append(page)
packets = OggPage.to_packets(old_pages, strict=False)
content_size = get_size(fileobj) - len(packets[0]) # approx
vcomment_data = b"\x81theora" + self.write(framing=False)
padding_left = len(packets[0]) - len(vcomment_data)
info = PaddingInfo(padding_left, content_size)
new_padding = info._get_padding(padding_func)
packets[0] = vcomment_data + b"\x00" * new_padding
new_pages = OggPage._from_packets_try_preserve(packets, old_pages)
OggPage.replace(fileobj, old_pages, new_pages)
def _inject(self, fileobj, padding_func):
"""Write tag data into the Vorbis comment packet/page."""
# Find the old pages in the file; we'll need to remove them,
# plus grab any stray setup packet data out of them.
fileobj.seek(0)
page = OggPage(fileobj)
while not page.packets[0].startswith(b"\x03vorbis"):
page = OggPage(fileobj)
old_pages = [page]
while not (old_pages[-1].complete or len(old_pages[-1].packets) > 1):
page = OggPage(fileobj)
if page.serial == old_pages[0].serial:
old_pages.append(page)
packets = OggPage.to_packets(old_pages, strict=False)
content_size = get_size(fileobj) - len(packets[0]) # approx
vcomment_data = b"\x03vorbis" + self.write()
padding_left = len(packets[0]) - len(vcomment_data)
info = PaddingInfo(padding_left, content_size)
new_padding = info._get_padding(padding_func)
# Set the new comment packet.
packets[0] = vcomment_data + b"\x00" * new_padding
new_pages = OggPage._from_packets_try_preserve(packets, old_pages)
OggPage.replace(fileobj, old_pages, new_pages)
def _inject(self, fileobj, padding_func):
"""Write tag data into the Theora comment packet/page."""
fileobj.seek(0)
page = OggPage(fileobj)
while not page.packets[0].startswith(b"\x81theora"):
page = OggPage(fileobj)
old_pages = [page]
while not (old_pages[-1].complete or len(old_pages[-1].packets) > 1):
page = OggPage(fileobj)
if page.serial == old_pages[0].serial:
old_pages.append(page)
packets = OggPage.to_packets(old_pages, strict=False)
content_size = get_size(fileobj) - len(packets[0]) # approx
vcomment_data = b"\x81theora" + self.write(framing=False)
padding_left = len(packets[0]) - len(vcomment_data)
info = PaddingInfo(padding_left, content_size)
new_padding = info._get_padding(padding_func)
packets[0] = vcomment_data + b"\x00" * new_padding
new_pages = OggPage._from_packets_try_preserve(packets, old_pages)
OggPage.replace(fileobj, old_pages, new_pages)
def _inject(self, fileobj, padding_func):
"""Write tag data into the FLAC Vorbis comment packet/page."""
# Ogg FLAC has no convenient data marker like Vorbis, but the
# second packet - and second page - must be the comment data.
fileobj.seek(0)
page = OggPage(fileobj)
while not page.packets[0].startswith(b"\x7FFLAC"):
page = OggPage(fileobj)
first_page = page
while not (page.sequence == 1 and page.serial == first_page.serial):
page = OggPage(fileobj)
old_pages = [page]
while not (old_pages[-1].complete or len(old_pages[-1].packets) > 1):
page = OggPage(fileobj)
if page.serial == first_page.serial:
old_pages.append(page)
packets = OggPage.to_packets(old_pages, strict=False)
# Set the new comment block.
data = self.write(framing=False)
data = packets[0][:1] + struct.pack(">I", len(data))[-3:] + data
packets[0] = data
new_pages = OggPage.from_packets(packets, old_pages[0].sequence)
OggPage.replace(fileobj, old_pages, new_pages)
def _inject(self, fileobj, padding_func):
"""Write tag data into the Vorbis comment packet/page."""
# Find the old pages in the file; we'll need to remove them,
# plus grab any stray setup packet data out of them.
fileobj.seek(0)
page = OggPage(fileobj)
while not page.packets[0].startswith(b"\x03vorbis"):
page = OggPage(fileobj)
old_pages = [page]
while not (old_pages[-1].complete or len(old_pages[-1].packets) > 1):
page = OggPage(fileobj)
if page.serial == old_pages[0].serial:
old_pages.append(page)
packets = OggPage.to_packets(old_pages, strict=False)
content_size = get_size(fileobj) - len(packets[0]) # approx
vcomment_data = b"\x03vorbis" + self.write()
padding_left = len(packets[0]) - len(vcomment_data)
info = PaddingInfo(padding_left, content_size)
new_padding = info._get_padding(padding_func)
# Set the new comment packet.
packets[0] = vcomment_data + b"\x00" * new_padding
new_pages = OggPage._from_packets_try_preserve(packets, old_pages)
OggPage.replace(fileobj, old_pages, new_pages)
def __init__(self, fileobj, info):
pages = []
complete = False
while not complete:
page = OggPage(fileobj)
if page.serial == info.serial:
pages.append(page)
complete = page.complete or (len(page.packets) > 1)
data = OggPage.to_packets(pages)[0][7:] # Strip off "\x03vorbis".
super(OggVCommentDict, self).__init__(data)
self._padding = len(data) - self._size
def __init__(self, fileobj, info):
pages = []
complete = False
while not complete:
page = OggPage(fileobj)
if page.serial == info.serial:
pages.append(page)
complete = page.complete or (len(page.packets) > 1)
data = OggPage.to_packets(pages)[0][7:]
super(OggTheoraCommentDict, self).__init__(data, framing=False)
self._padding = len(data) - self._size
def __init__(self, fileobj, info):
pages = []
complete = False
while not complete:
page = OggPage(fileobj)
if page.serial == info.serial:
pages.append(page)
complete = page.complete or (len(page.packets) > 1)
data = OggPage.to_packets(pages)[0]
super(OggSpeexVComment, self).__init__(data, framing=False)
self._padding = len(data) - self._size
def __init__(self, fileobj, info):
# data should be pointing at the start of an Ogg page, after
# the first FLAC page.
pages = []
complete = False
while not complete:
page = OggPage(fileobj)
if page.serial == info.serial:
pages.append(page)
complete = page.complete or (len(page.packets) > 1)
comment = cBytesIO(OggPage.to_packets(pages)[0][4:])
super(OggFLACVComment, self).__init__(comment, framing=False)
def __init__(self, fileobj, info):
# data should be pointing at the start of an Ogg page, after
# the first FLAC page.
pages = []
complete = False
while not complete:
page = OggPage(fileobj)
if page.serial == info.serial:
pages.append(page)
complete = page.complete or (len(page.packets) > 1)
comment = cBytesIO(OggPage.to_packets(pages)[0][4:])
super(OggFLACVComment, self).__init__(comment, framing=False)
def __init__(self, fileobj, info):
pages = self.__get_comment_pages(fileobj, info)
data = OggPage.to_packets(pages)[0][8:] # Strip OpusTags
fileobj = BytesIO(data)
super(OggOpusVComment, self).__init__(fileobj, framing=False)
self._padding = len(data) - self._size
# in case the LSB of the first byte after v-comment is 1, preserve the
# following data
padding_flag = fileobj.read(1)
if padding_flag and ord(padding_flag) & 0x1:
self._pad_data = padding_flag + fileobj.read()
self._padding = 0 # we have to preserve, so no padding
else:
self._pad_data = b""
def __init__(self, fileobj, info):
pages = self.__get_comment_pages(fileobj, info)
data = OggPage.to_packets(pages)[0][8:] # Strip OpusTags
fileobj = BytesIO(data)
super(OggOpusVComment, self).__init__(fileobj, framing=False)
self._padding = len(data) - self._size
# in case the LSB of the first byte after v-comment is 1, preserve the
# following data
padding_flag = fileobj.read(1)
if padding_flag and ord(padding_flag) & 0x1:
self._pad_data = padding_flag + fileobj.read()
self._padding = 0 # we have to preserve, so no padding
else:
self._pad_data = b""
def _inject(self, fileobj, padding_func):
fileobj.seek(0)
info = OggOpusInfo(fileobj)
old_pages = self.__get_comment_pages(fileobj, info)
packets = OggPage.to_packets(old_pages)
vcomment_data = b"OpusTags" + self.write(framing=False)
if self._pad_data:
# if we have padding data to preserver we can't add more padding
# as long as we don't know the structure of what follows
packets[0] = vcomment_data + self._pad_data
else:
content_size = get_size(fileobj) - len(packets[0]) # approx
padding_left = len(packets[0]) - len(vcomment_data)
info = PaddingInfo(padding_left, content_size)
new_padding = info._get_padding(padding_func)
packets[0] = vcomment_data + b"\x00" * new_padding
new_pages = OggPage._from_packets_try_preserve(packets, old_pages)
OggPage.replace(fileobj, old_pages, new_pages)
def _inject(self, fileobj, padding_func):
fileobj.seek(0)
info = OggOpusInfo(fileobj)
old_pages = self.__get_comment_pages(fileobj, info)
packets = OggPage.to_packets(old_pages)
vcomment_data = b"OpusTags" + self.write(framing=False)
if self._pad_data:
# if we have padding data to preserver we can't add more padding
# as long as we don't know the structure of what follows
packets[0] = vcomment_data + self._pad_data
else:
content_size = get_size(fileobj) - len(packets[0]) # approx
padding_left = len(packets[0]) - len(vcomment_data)
info = PaddingInfo(padding_left, content_size)
new_padding = info._get_padding(padding_func)
packets[0] = vcomment_data + b"\x00" * new_padding
new_pages = OggPage._from_packets_try_preserve(packets, old_pages)
OggPage.replace(fileobj, old_pages, new_pages)
def _inject(self, fileobj, padding_func):
"""Write tag data into the Speex comment packet/page."""
fileobj.seek(0)
# Find the first header page, with the stream info.
# Use it to get the serial number.
page = OggPage(fileobj)
while not page.packets[0].startswith(b"Speex "):
page = OggPage(fileobj)
# Look for the next page with that serial number, it'll start
# the comment packet.
serial = page.serial
page = OggPage(fileobj)
while page.serial != serial:
page = OggPage(fileobj)
# Then find all the pages with the comment packet.
old_pages = [page]
while not (old_pages[-1].complete or len(old_pages[-1].packets) > 1):
page = OggPage(fileobj)
if page.serial == old_pages[0].serial:
old_pages.append(page)
packets = OggPage.to_packets(old_pages, strict=False)
content_size = get_size(fileobj) - len(packets[0]) # approx
vcomment_data = self.write(framing=False)
padding_left = len(packets[0]) - len(vcomment_data)
info = PaddingInfo(padding_left, content_size)
new_padding = info._get_padding(padding_func)
# Set the new comment packet.
packets[0] = vcomment_data + b"\x00" * new_padding
new_pages = OggPage._from_packets_try_preserve(packets, old_pages)
OggPage.replace(fileobj, old_pages, new_pages)
