def importPart(filename, partName=None):
updateExistingPart = partName <> None
if updateExistingPart:
FreeCAD.Console.PrintMessage("updating part %s from %s\n" %
(partName, filename))
else:
FreeCAD.Console.PrintMessage("importing part from %s\n" % filename)
doc_already_open = filename in [
d.FileName for d in FreeCAD.listDocuments().values()
]
debugPrint(4, "%s open already %s" % (filename, doc_already_open))
if not doc_already_open:
currentDoc = FreeCAD.ActiveDocument.Name
FreeCAD.open(filename)
FreeCAD.setActiveDocument(currentDoc)
doc = [
d for d in FreeCAD.listDocuments().values() if d.FileName == filename
][0]
visibleObjects = [
obj for obj in doc.Objects
if hasattr(obj, 'ViewObject') and obj.ViewObject.isVisible()
and hasattr(obj, 'Shape') and len(obj.Shape.Faces) > 0
] # len(obj.Shape.Faces) > 0 to avoid sketches
debugPrint(3, '%s objects %s' % (doc.Name, doc.Objects))
if any(['importPart' in obj.Content
for obj in doc.Objects]) and not len(visibleObjects) == 1:
subAssemblyImport = True
debugPrint(2, 'Importing subassembly from %s' % filename)
tempPartName = 'import_temporary_part'
obj_to_copy = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
tempPartName)
obj_to_copy.Proxy = Proxy_muxAssemblyObj()
obj_to_copy.ViewObject.Proxy = ImportedPartViewProviderProxy()
obj_to_copy.Shape = muxObjects(doc)
if (not updateExistingPart) or \
(updateExistingPart and getattr( FreeCAD.ActiveDocument.getObject(partName),'updateColors',True)):
muxMapColors(doc, obj_to_copy)
else:
subAssemblyImport = False
if len(visibleObjects) <> 1:
if not updateExistingPart:
msg = "A part can only be imported from a FreeCAD document with exactly one visible part. Aborting operation"
QtGui.QMessageBox.information(QtGui.qApp.activeWindow(),
"Value Error", msg)
else:
msg = "Error updating part from %s: A part can only be imported from a FreeCAD document with exactly one visible part. Aborting update of %s" % (
partName, filename)
QtGui.QMessageBox.information(QtGui.qApp.activeWindow(),
"Value Error", msg)
#QtGui.QMessageBox.warning( QtGui.qApp.activeWindow(), "Value Error!", msg, QtGui.QMessageBox.StandardButton.Ok )
return
obj_to_copy = visibleObjects[0]
if updateExistingPart:
obj = FreeCAD.ActiveDocument.getObject(partName)
prevPlacement = obj.Placement
if not hasattr(obj, 'updateColors'):
obj.addProperty("App::PropertyBool", "updateColors",
"importPart").updateColors = True
importUpdateConstraintSubobjects(FreeCAD.ActiveDocument, obj,
obj_to_copy)
else:
partName = findUnusedObjectName(doc.Label + '_')
try:
obj = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
partName)
except UnicodeEncodeError:
safeName = findUnusedObjectName('import_')
obj = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
safeName)
obj.Label = findUnusedLabel(doc.Label + '_')
obj.addProperty("App::PropertyFile", "sourceFile",
"importPart").sourceFile = filename
obj.addProperty("App::PropertyFloat", "timeLastImport", "importPart")
obj.setEditorMode("timeLastImport", 1)
obj.addProperty("App::PropertyBool", "fixedPosition", "importPart")
obj.fixedPosition = not any([
i.fixedPosition for i in FreeCAD.ActiveDocument.Objects
if hasattr(i, 'fixedPosition')
])
obj.addProperty("App::PropertyBool", "updateColors",
"importPart").updateColors = True
obj.Shape = obj_to_copy.Shape.copy()
if updateExistingPart:
obj.Placement = prevPlacement
obj.touch()
else:
for p in obj_to_copy.ViewObject.PropertiesList: #assuming that the user may change the appearance of parts differently depending on the assembly.
if hasattr(obj.ViewObject, p) and p not in ['DiffuseColor']:
setattr(obj.ViewObject, p, getattr(obj_to_copy.ViewObject, p))
obj.ViewObject.Proxy = ImportedPartViewProviderProxy()
if getattr(obj, 'updateColors', True):
obj.ViewObject.DiffuseColor = copy.copy(
obj_to_copy.ViewObject.DiffuseColor)
obj.Proxy = Proxy_importPart()
obj.timeLastImport = os.path.getmtime(obj.sourceFile)
#clean up
if subAssemblyImport:
FreeCAD.ActiveDocument.removeObject(tempPartName)
if not doc_already_open: #then close again
FreeCAD.closeDocument(doc.Name)
FreeCAD.setActiveDocument(currentDoc)
return obj
def importPart(filename, partName=None):
updateExistingPart = partName is not None
#if updateExistingPart:
# FreeCAD.Console.PrintMessage("Updating part %s from %s\n" % (partName, filename))
#else:
# FreeCAD.Console.PrintMessage("Importing part from %s\n" % filename)
already_open = [d.FileName for d in FreeCAD.listDocuments().values()]
doc_already_open = filename in already_open
#debugPrint(4, "%s open already %s" % (filename, doc_already_open))
if not doc_already_open:
currentDoc = FreeCAD.ActiveDocument.Name
FreeCAD.open(filename)
FreeCAD.setActiveDocument(currentDoc)
doc = [d for d in FreeCAD.listDocuments().values() if d.FileName == filename][0]
#debugPrint(3, '%s objects %s' % (doc.Name, doc.Objects))
if any([ 'importPart' in obj.Content for obj in doc.Objects]):
subAssemblyImport = True
#debugPrint(2, 'Importing subassembly from %s' % filename)
tempPartName = 'import_temporary_part'
obj_to_copy = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",tempPartName)
obj_to_copy.Proxy = Proxy_muxAssemblyObj()
obj_to_copy.ViewObject.Proxy = 0
obj_to_copy.Shape = muxObjects(doc)
else:
subAssemblyImport = False
visibleObjects = [obj for obj in doc.Objects
if hasattr(obj,'ViewObject') and obj.Label == "Last"
and hasattr(obj,'Shape') and len(obj.Shape.Faces) > 0] # len(obj.Shape.Faces) > 0 to avoid sketches
if len(visibleObjects) != 1:
if not updateExistingPart:
msg = "A part can only be imported from a FreeCAD document with exactly one visible part. Aborting operation"
QtGui.QMessageBox.information( QtGui.qApp.activeWindow(), "Value Error", msg )
else:
msg = "Error updating part from %s: A part can only be imported from a FreeCAD document with exactly one visible part. Aborting update of %s" % (partName, filename)
QtGui.QMessageBox.information( QtGui.qApp.activeWindow(), "Value Error", msg )
QtGui.QMessageBox.warning( QtGui.qApp.activeWindow(), "Value Error!", msg, QtGui.QMessageBox.StandardButton.Ok )
return
obj_to_copy = visibleObjects[0]
if updateExistingPart:
obj = FreeCAD.ActiveDocument.getObject(partName)
prevPlacement = obj.Placement
importUpdateConstraintSubobjects( FreeCAD.ActiveDocument, obj, obj_to_copy )
else:
partName = findUnusedObjectName( doc.Label + '_' )
try:
obj = FreeCAD.ActiveDocument.addObject("Part::FeaturePython", partName)
except UnicodeEncodeError:
safeName = findUnusedObjectName('import_')
obj = FreeCAD.ActiveDocument.addObject("Part::FeaturePython", safeName)
obj.Label = findUnusedLabel( doc.Label + '_' )
obj.addProperty("App::PropertyFile", "sourceFile", "importPart").sourceFile = filename
obj.addProperty("App::PropertyFloat", "timeLastImport", "importPart")
obj.setEditorMode("timeLastImport", 1)
obj.addProperty("App::PropertyBool", "fixedPosition", "importPart")
obj.fixedPosition = not any([i.fixedPosition for i in FreeCAD.ActiveDocument.Objects if hasattr(i, 'fixedPosition') ])
obj.Shape = obj_to_copy.Shape.copy()
if updateExistingPart:
obj.Placement = prevPlacement
obj.touch()
else:
#obj.ViewObject.Proxy = ViewProviderProxy_importPart()
obj.ViewObject.Proxy = 0
for p in obj_to_copy.ViewObject.PropertiesList: #assuming that the user may change the appearance of parts differently depending on the assembly.
if hasattr(obj.ViewObject, p):
setattr(obj.ViewObject, p, getattr(obj_to_copy.ViewObject, p))
obj.Proxy = Proxy_importPart()
obj.timeLastImport = os.path.getmtime( obj.sourceFile )
#clean up
if subAssemblyImport:
FreeCAD.ActiveDocument.removeObject(tempPartName)
if not doc_already_open: #then close again
FreeCAD.closeDocument(doc.Name)
FreeCAD.setActiveDocument(currentDoc)
return obj
def importPart( filename, partName=None, doc_assembly=None ):
if doc_assembly == None:
doc_assembly = FreeCAD.ActiveDocument
updateExistingPart = partName <> None
if updateExistingPart:
FreeCAD.Console.PrintMessage("updating part %s from %s\n" % (partName,filename))
else:
FreeCAD.Console.PrintMessage("importing part from %s\n" % filename)
doc_already_open = filename in [ d.FileName for d in FreeCAD.listDocuments().values() ]
debugPrint(4, "%s open already %s" % (filename, doc_already_open))
if doc_already_open:
doc = [ d for d in FreeCAD.listDocuments().values() if d.FileName == filename][0]
else:
if filename.lower().endswith('.fcstd'):
debugPrint(4, ' opening %s' % filename)
doc = FreeCAD.openDocument(filename)
debugPrint(4, ' succesfully opened %s' % filename)
else: #trying shaping import http://forum.freecadweb.org/viewtopic.php?f=22&t=12434&p=99772#p99772x
import ImportGui
doc = FreeCAD.newDocument( os.path.basename(filename) )
shapeobj=ImportGui.insert(filename,doc.Name)
visibleObjects = [ obj for obj in doc.Objects
if hasattr(obj,'ViewObject') and obj.ViewObject.isVisible()
and hasattr(obj,'Shape') and len(obj.Shape.Faces) > 0] # len(obj.Shape.Faces) > 0 to avoid sketches
debugPrint(3, '%s objects %s' % (doc.Name, doc.Objects))
if any([ 'importPart' in obj.Content for obj in doc.Objects]) and not len(visibleObjects) == 1:
subAssemblyImport = True
debugPrint(2, 'Importing subassembly from %s' % filename)
tempPartName = 'import_temporary_part'
obj_to_copy = doc_assembly.addObject("Part::FeaturePython",tempPartName)
obj_to_copy.Proxy = Proxy_muxAssemblyObj()
obj_to_copy.ViewObject.Proxy = ImportedPartViewProviderProxy()
obj_to_copy.Shape = muxObjects(doc)
if (not updateExistingPart) or \
(updateExistingPart and getattr( doc_assembly.getObject(partName),'updateColors',True)):
muxMapColors(doc, obj_to_copy)
else:
subAssemblyImport = False
if len(visibleObjects) <> 1:
if not updateExistingPart:
msg = "A part can only be imported from a FreeCAD document with exactly one visible part. Aborting operation"
QtGui.QMessageBox.information( QtGui.qApp.activeWindow(), "Value Error", msg )
else:
msg = "Error updating part from %s: A part can only be imported from a FreeCAD document with exactly one visible part. Aborting update of %s" % (partName, filename)
QtGui.QMessageBox.information( QtGui.qApp.activeWindow(), "Value Error", msg )
#QtGui.QMessageBox.warning( QtGui.qApp.activeWindow(), "Value Error!", msg, QtGui.QMessageBox.StandardButton.Ok )
return
obj_to_copy = visibleObjects[0]
if updateExistingPart:
obj = doc_assembly.getObject(partName)
prevPlacement = obj.Placement
if not hasattr(obj, 'updateColors'):
obj.addProperty("App::PropertyBool","updateColors","importPart").updateColors = True
importUpdateConstraintSubobjects( doc_assembly, obj, obj_to_copy )
else:
partName = findUnusedObjectName( doc.Label + '_', document=doc_assembly )
try:
obj = doc_assembly.addObject("Part::FeaturePython",partName)
except UnicodeEncodeError:
safeName = findUnusedObjectName('import_', document=doc_assembly)
obj = doc_assembly.addObject("Part::FeaturePython", safeName)
obj.Label = findUnusedLabel( doc.Label + '_', document=doc_assembly )
obj.addProperty("App::PropertyFile", "sourceFile", "importPart").sourceFile = filename
obj.addProperty("App::PropertyFloat", "timeLastImport","importPart")
obj.setEditorMode("timeLastImport",1)
obj.addProperty("App::PropertyBool","fixedPosition","importPart")
obj.fixedPosition = not any([i.fixedPosition for i in doc_assembly.Objects if hasattr(i, 'fixedPosition') ])
obj.addProperty("App::PropertyBool","updateColors","importPart").updateColors = True
obj.Shape = obj_to_copy.Shape.copy()
if updateExistingPart:
obj.Placement = prevPlacement
else:
for p in obj_to_copy.ViewObject.PropertiesList: #assuming that the user may change the appearance of parts differently depending on the assembly.
if hasattr(obj.ViewObject, p) and p not in ['DiffuseColor']:
setattr(obj.ViewObject, p, getattr(obj_to_copy.ViewObject, p))
obj.ViewObject.Proxy = ImportedPartViewProviderProxy()
if getattr(obj,'updateColors',True):
obj.ViewObject.DiffuseColor = copy.copy( obj_to_copy.ViewObject.DiffuseColor )
obj.Proxy = Proxy_importPart()
obj.timeLastImport = os.path.getmtime( obj.sourceFile )
#clean up
if subAssemblyImport:
doc_assembly.removeObject(tempPartName)
if not doc_already_open: #then close again
FreeCAD.closeDocument(doc.Name)
FreeCAD.setActiveDocument(doc_assembly.Name)
FreeCAD.ActiveDocument = doc_assembly
return obj
def importPart(filename, partName=None):
updateExistingPart = partName <> None
if updateExistingPart:
FreeCAD.Console.PrintMessage("updating part %s from %s\n" % (partName, filename))
else:
FreeCAD.Console.PrintMessage("importing part from %s\n" % filename)
doc_already_open = filename in [d.FileName for d in FreeCAD.listDocuments().values()]
debugPrint(4, "%s open already %s" % (filename, doc_already_open))
if doc_already_open:
doc = [d for d in FreeCAD.listDocuments().values() if d.FileName == filename][0]
else:
currentDoc = FreeCAD.ActiveDocument.Name
doc = FreeCAD.open(filename)
FreeCAD.setActiveDocument(currentDoc)
visibleObjects = [
obj
for obj in doc.Objects
if hasattr(obj, "ViewObject")
and obj.ViewObject.isVisible()
and hasattr(obj, "Shape")
and len(obj.Shape.Faces) > 0
] # len(obj.Shape.Faces) > 0 to avoid sketches
debugPrint(3, "%s objects %s" % (doc.Name, doc.Objects))
if any(["importPart" in obj.Content for obj in doc.Objects]) and not len(visibleObjects) == 1:
subAssemblyImport = True
debugPrint(2, "Importing subassembly from %s" % filename)
tempPartName = "import_temporary_part"
obj_to_copy = FreeCAD.ActiveDocument.addObject("Part::FeaturePython", tempPartName)
obj_to_copy.Proxy = Proxy_muxAssemblyObj()
obj_to_copy.ViewObject.Proxy = ImportedPartViewProviderProxy()
obj_to_copy.Shape = muxObjects(doc)
if (not updateExistingPart) or (
updateExistingPart and getattr(FreeCAD.ActiveDocument.getObject(partName), "updateColors", True)
):
muxMapColors(doc, obj_to_copy)
else:
subAssemblyImport = False
if len(visibleObjects) <> 1:
if not updateExistingPart:
msg = "A part can only be imported from a FreeCAD document with exactly one visible part. Aborting operation"
QtGui.QMessageBox.information(QtGui.qApp.activeWindow(), "Value Error", msg)
else:
msg = (
"Error updating part from %s: A part can only be imported from a FreeCAD document with exactly one visible part. Aborting update of %s"
% (partName, filename)
)
QtGui.QMessageBox.information(QtGui.qApp.activeWindow(), "Value Error", msg)
# QtGui.QMessageBox.warning( QtGui.qApp.activeWindow(), "Value Error!", msg, QtGui.QMessageBox.StandardButton.Ok )
return
obj_to_copy = visibleObjects[0]
if updateExistingPart:
obj = FreeCAD.ActiveDocument.getObject(partName)
prevPlacement = obj.Placement
if not hasattr(obj, "updateColors"):
obj.addProperty("App::PropertyBool", "updateColors", "importPart").updateColors = True
importUpdateConstraintSubobjects(FreeCAD.ActiveDocument, obj, obj_to_copy)
else:
partName = findUnusedObjectName(doc.Label + "_")
try:
obj = FreeCAD.ActiveDocument.addObject("Part::FeaturePython", partName)
except UnicodeEncodeError:
safeName = findUnusedObjectName("import_")
obj = FreeCAD.ActiveDocument.addObject("Part::FeaturePython", safeName)
obj.Label = findUnusedLabel(doc.Label + "_")
obj.addProperty("App::PropertyFile", "sourceFile", "importPart").sourceFile = filename
obj.addProperty("App::PropertyFloat", "timeLastImport", "importPart")
obj.setEditorMode("timeLastImport", 1)
obj.addProperty("App::PropertyBool", "fixedPosition", "importPart")
obj.fixedPosition = not any(
[i.fixedPosition for i in FreeCAD.ActiveDocument.Objects if hasattr(i, "fixedPosition")]
)
obj.addProperty("App::PropertyBool", "updateColors", "importPart").updateColors = True
obj.Shape = obj_to_copy.Shape.copy()
if updateExistingPart:
obj.Placement = prevPlacement
obj.touch()
else:
for (
p
) in (
obj_to_copy.ViewObject.PropertiesList
): # assuming that the user may change the appearance of parts differently depending on the assembly.
if hasattr(obj.ViewObject, p) and p not in ["DiffuseColor"]:
setattr(obj.ViewObject, p, getattr(obj_to_copy.ViewObject, p))
obj.ViewObject.Proxy = ImportedPartViewProviderProxy()
if getattr(obj, "updateColors", True):
obj.ViewObject.DiffuseColor = copy.copy(obj_to_copy.ViewObject.DiffuseColor)
obj.Proxy = Proxy_importPart()
obj.timeLastImport = os.path.getmtime(obj.sourceFile)
# clean up
if subAssemblyImport:
FreeCAD.ActiveDocument.removeObject(tempPartName)
if not doc_already_open: # then close again
FreeCAD.closeDocument(doc.Name)
FreeCAD.setActiveDocument(currentDoc)
return obj
def importPart( filename, partName=None, doc_assembly=None ):
if doc_assembly == None:
doc_assembly = FreeCAD.ActiveDocument
updateExistingPart = partName != None
if updateExistingPart:
FreeCAD.Console.PrintMessage("updating part %s from %s\n" % (partName,filename))
else:
FreeCAD.Console.PrintMessage("importing part from %s\n" % filename)
doc_already_open = filename in [ d.FileName for d in FreeCAD.listDocuments().values() ]
debugPrint(4, "%s open already %s" % (filename, doc_already_open))
if doc_already_open:
doc = [ d for d in FreeCAD.listDocuments().values() if d.FileName == filename][0]
else:
if filename.lower().endswith('.fcstd'):
debugPrint(4, ' opening %s' % filename)
doc = FreeCAD.openDocument(filename)
debugPrint(4, ' succesfully opened %s' % filename)
else: #trying shaping import http://forum.freecadweb.org/viewtopic.php?f=22&t=12434&p=99772#p99772x
import ImportGui
doc = FreeCAD.newDocument( os.path.basename(filename) )
shapeobj=ImportGui.insert(filename,doc.Name)
visibleObjects = [ obj for obj in doc.Objects
if hasattr(obj,'ViewObject') and obj.ViewObject.isVisible()
and hasattr(obj,'Shape') and len(obj.Shape.Faces) > 0 and 'Body' not in obj.Name] # len(obj.Shape.Faces) > 0 to avoid sketches, skip Body
debugPrint(3, '%s objects %s' % (doc.Name, doc.Objects))
if any([ 'importPart' in obj.Content for obj in doc.Objects]) and not len(visibleObjects) == 1:
subAssemblyImport = True
debugPrint(2, 'Importing subassembly from %s' % filename)
tempPartName = 'import_temporary_part'
obj_to_copy = doc_assembly.addObject("Part::FeaturePython",tempPartName)
obj_to_copy.Proxy = Proxy_muxAssemblyObj()
obj_to_copy.ViewObject.Proxy = ImportedPartViewProviderProxy()
obj_to_copy.Shape = muxObjects(doc)
if (not updateExistingPart) or \
(updateExistingPart and getattr( doc_assembly.getObject(partName),'updateColors',True)):
muxMapColors(doc, obj_to_copy)
else:
subAssemblyImport = False
if len(visibleObjects) != 1:
if not updateExistingPart:
msg = "A part can only be imported from a FreeCAD document with exactly one visible part. Aborting operation"
QtGui.QMessageBox.information( QtGui.qApp.activeWindow(), "Value Error", msg )
else:
msg = "Error updating part from %s: A part can only be imported from a FreeCAD document with exactly one visible part. Aborting update of %s" % (partName, filename)
QtGui.QMessageBox.information( QtGui.qApp.activeWindow(), "Value Error", msg )
#QtGui.QMessageBox.warning( QtGui.qApp.activeWindow(), "Value Error!", msg, QtGui.QMessageBox.StandardButton.Ok )
return
obj_to_copy = visibleObjects[0]
if updateExistingPart:
obj = doc_assembly.getObject(partName)
prevPlacement = obj.Placement
if not hasattr(obj, 'updateColors'):
obj.addProperty("App::PropertyBool","updateColors","importPart").updateColors = True
importUpdateConstraintSubobjects( doc_assembly, obj, obj_to_copy )
else:
partName = findUnusedObjectName( doc.Label + '_', document=doc_assembly )
try:
obj = doc_assembly.addObject("Part::FeaturePython",partName)
except UnicodeEncodeError:
safeName = findUnusedObjectName('import_', document=doc_assembly)
obj = doc_assembly.addObject("Part::FeaturePython", safeName)
obj.Label = findUnusedLabel( doc.Label + '_', document=doc_assembly )
obj.addProperty("App::PropertyFile", "sourceFile", "importPart").sourceFile = filename
obj.addProperty("App::PropertyFloat", "timeLastImport","importPart")
obj.setEditorMode("timeLastImport",1)
obj.addProperty("App::PropertyBool","fixedPosition","importPart")
obj.fixedPosition = not any([i.fixedPosition for i in doc_assembly.Objects if hasattr(i, 'fixedPosition') ])
obj.addProperty("App::PropertyBool","updateColors","importPart").updateColors = True
obj.Shape = obj_to_copy.Shape.copy()
if updateExistingPart:
obj.Placement = prevPlacement
else:
for p in obj_to_copy.ViewObject.PropertiesList: #assuming that the user may change the appearance of parts differently depending on the assembly.
if hasattr(obj.ViewObject, p) and p not in ['DiffuseColor']:
setattr(obj.ViewObject, p, getattr(obj_to_copy.ViewObject, p))
obj.ViewObject.Proxy = ImportedPartViewProviderProxy()
if getattr(obj,'updateColors',True):
obj.ViewObject.DiffuseColor = copy.copy( obj_to_copy.ViewObject.DiffuseColor )
#obj.ViewObject.Transparency = copy.copy( obj_to_copy.ViewObject.Transparency ) # .Transparency property
tsp = copy.copy( obj_to_copy.ViewObject.Transparency ) # .Transparency workaround for FC 0.17 @ Nov 2016
if tsp < 100 and tsp!=0:
obj.ViewObject.Transparency = tsp+1
if tsp == 100:
obj.ViewObject.Transparency = tsp-1
obj.ViewObject.Transparency = tsp # .Transparency workaround end
obj.Proxy = Proxy_importPart()
obj.timeLastImport = os.path.getmtime( filename )
#clean up
if subAssemblyImport:
doc_assembly.removeObject(tempPartName)
if not doc_already_open: #then close again
FreeCAD.closeDocument(doc.Name)
FreeCAD.setActiveDocument(doc_assembly.Name)
FreeCAD.ActiveDocument = doc_assembly
return obj