def plot_laser_driven(self, out_num):
h_fig = plt.figure(figsize=(6.5, 5))
self.outfile.spec_name = self.background_spec_name
self.outfile.out_num = out_num
h_ax = h_fig.add_subplot(111)
#h_ax.set_aspect('equal', 'box')
#plt.ylim(-10,10)
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, cmap='gray', vmin=-5.)
self.outfile._color_bar.set_label('$\\rho_e$')
self.outfile.close()
if self.trail_spec_name is not None:
self.outfile.spec_name = self.trail_spec_name
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(
h_fig,
h_ax,
vmin=self.trail_vmin,
vmax=self.trail_vmax,
cmap=my_cmap.cmap_higher_range_transparent())
self.outfile._color_bar.set_label('$\\rho_t$')
self.outfile.close()
self.outfile.field_name = 'e3'
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig,
h_ax,
cmap=my_cmap.cmap_middle_range_transparent())
self.outfile._color_bar.set_label('$E_y$')
self.outfile.close()
plt.tight_layout()
return h_fig
def plot_laser_driven(self, out_num, if_laser_profile=False):
''' When if_laser_profile is Ture, plot the laser profile instead of original E-field'''
h_fig = plt.figure(figsize=(6.5,5))
self.outfile.field_name='charge'
self.outfile.spec_name=self.background_spec_name
self.outfile.out_num=out_num
h_ax = h_fig.add_subplot(111)
#h_ax.set_aspect('equal', 'box')
#plt.ylim(-10,10)
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, cmap='gray', vmax=self.background_vmax, vmin=self.background_vmin)
self.outfile._color_bar.set_label('$\\rho_e$')
self.outfile.close()
if self.trail_spec_name is not None:
self.outfile.spec_name=self.trail_spec_name
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, vmin=self.trail_vmin, vmax=self.trail_vmax, cmap=my_cmap.cmap_higher_range_transparent())
self.outfile._color_bar.set_label('$\\rho_t$')
self.outfile.close()
self.outfile.field_name='e3'
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
if if_laser_profile:
self.outfile.data_profile2d()
self.outfile.plot_data(h_fig, h_ax, cmap=my_cmap.cmap_lower_range_transparent(plt.cm.Reds, transparency_transition_region=[0.15,0.4]))
else: self.outfile.plot_data(h_fig, h_ax, cmap=my_cmap.cmap_middle_range_transparent())
self.outfile._color_bar.set_label('$E_y$')
self.outfile.close()
plt.tight_layout()
return h_fig
def plot_beam_driven(self, out_num):
h_fig = plt.figure(figsize=(8,4.5))
self.outfile.field_name='charge'
self.outfile.spec_name=self.background_spec_name
self.outfile.out_num=out_num
h_ax = h_fig.add_subplot(111)
h_ax.set_aspect('equal','box')
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, vmin=self.background_vmin, vmax=self.background_vmax, cmap='gray')
self.outfile._color_bar.set_label('$\\rho_e$')
self.outfile.close()
self.outfile.spec_name=self.driver_spec_name
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, vmin=self.driver_vmin, vmax=self.driver_vmax, cmap=my_cmap.cmap_higher_range_transparent(plt.cm.hot))
self.outfile._color_bar.set_label('$\\rho_d$')
if self.if_driver_cm:
try:
self.outfile.data_center_of_mass2d()
self.outfile.plot_data(h_fig, h_ax, linestyle='c--')
# RuntimeError occurs when there is no particle
except RuntimeError: pass
self.outfile.close()
if self.trail_spec_name is not None:
self.outfile.spec_name=self.trail_spec_name
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, vmin=self.trail_vmin, vmax=self.trail_vmax, cmap=my_cmap.cmap_higher_range_transparent())
self.outfile._color_bar.set_label('$\\rho_t$')
if self.if_trail_cm:
try:
self.outfile.data_center_of_mass2d()
self.outfile.plot_data(h_fig, h_ax, linestyle='m--')
# RuntimeError occurs when there is no particle
except RuntimeError: pass
self.outfile.close()
if self.if_e1:
self.outfile.field_name='e1'
self.outfile.open()
self.outfile.read_data_lineout()
self.outfile.plot_data(h_fig, h_ax, linestyle='-r', if_ylabel=False, multiple=1)
self.outfile.close()
if self.if_psi:
self.outfile.field_name='psi'
self.outfile.open()
self.outfile.read_data_lineout()
self.outfile.plot_data(h_fig, h_ax, linestyle='-b', if_ylabel=False, multiple=1)
self.outfile.close()
plt.tight_layout()
return h_fig
def plot_beam_driven(self, out_num):
h_fig = plt.figure(figsize=(8,4.5))
self.outfile.field_name='charge'
self.outfile.spec_name=self.background_spec_name
self.outfile.out_num=out_num
h_ax = h_fig.add_subplot(111)
h_ax.set_aspect('equal','box')
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, vmin=self.background_vmin, vmax=self.background_vmax, cmap='gray')
self.outfile._color_bar.set_label('$\\rho_e$')
self.outfile.close()
self.outfile.spec_name=self.driver_spec_name
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, vmin=self.driver_vmin, vmax=self.driver_vmax, cmap=my_cmap.cmap_higher_range_transparent(plt.cm.hot))
self.outfile._color_bar.set_label('$\\rho_d$')
if self.if_driver_cm:
try:
self.outfile.data_center_of_mass2d()
self.outfile.plot_data(h_fig, h_ax, c='c', ls='--')
# RuntimeError occurs when there is no particle
except RuntimeError: pass
self.outfile.close()
if self.trail_spec_name is not None:
self.outfile.spec_name=self.trail_spec_name
self.outfile.open()
self.outfile.read_data_slice(dir=self.dir)
self.outfile.plot_data(h_fig, h_ax, vmin=self.trail_vmin, vmax=self.trail_vmax, cmap=my_cmap.cmap_higher_range_transparent())
self.outfile._color_bar.set_label('$\\rho_t$')
if self.if_trail_cm:
try:
self.outfile.data_center_of_mass2d()
self.outfile.plot_data(h_fig, h_ax, c='m', ls='--')
# RuntimeError occurs when there is no particle
except RuntimeError: pass
self.outfile.close()
# Twin axis is deprecated
if self.if_e1:
self.outfile.field_name='e1'
self.outfile.open()
self.outfile.read_data_lineout()
self.outfile.plot_data(h_fig, h_ax, if_ylabel=False, multiple=self.e1_multiple, c='r', ls='-')
self.outfile.close()
if self.if_psi:
self.outfile.field_name='psi'
if not os.path.isfile(self.outfile.path_filename):
warnings.warn('Psi file not exit. Try to get psi by integrating Ez.')
# No psi file, get psi by integrating e1 if e1 is already read
if self.if_e1:
if self.code_name != 'quickpic':
# For OSIRIS and HiPACE, psi is e1 integration from right to left
e1 = np.flip(self.outfile._data)
else: e1 = self.outfile._data
np.cumsum(e1*self.outfile._axis_slices[0].step, out=self.outfile._data)
if self.code_name != 'quickpic':
# For OSIRIS and HiPACE, flip the data
self.outfile._data = np.flip(self.outfile._data)
else: warnings.warn('Ez is not read. Please set if_e1 to True.')
else:
# There is psi file, read psi normally
self.outfile.open()
self.outfile.read_data_lineout()
self.outfile.close()
self.outfile.plot_data(h_fig, h_ax, if_ylabel=False, multiple=self.psi_multiple, c='b', ls='-')
plt.tight_layout()
return h_fig
def plot_laser_driven(self, out_num, if_laser_profile=False):
''' When if_laser_profile is Ture, plot the laser profile instead of original E-field'''
h_fig = plt.figure(figsize=(6.5, 5))
self.outfile.field_name = 'charge'
self.outfile.spec_name = self.background_spec_name
self.outfile.out_num = out_num
h_ax = h_fig.add_subplot(111)
#h_ax.set_aspect('equal', 'box')
#plt.ylim(-10,10)
self.outfile.open()
if self.outfile.num_dimensions >= 3:
self.outfile.read_data_slice(dir=self.dir)
else:
self.outfile.read_data()
self.outfile.plot_data(h_fig,
h_ax,
cmap='gray',
vmax=self.background_vmax,
vmin=self.background_vmin)
self.outfile._color_bar.set_label('$\\rho_e$')
self.outfile.close()
if self.trail_spec_name is not None:
self.outfile.spec_name = self.trail_spec_name
self.outfile.open()
if self.outfile.num_dimensions >= 3:
self.outfile.read_data_slice(dir=self.dir)
else:
self.outfile.read_data()
self.outfile.plot_data(
h_fig,
h_ax,
vmin=self.trail_vmin,
vmax=self.trail_vmax,
cmap=my_cmap.cmap_higher_range_transparent())
self.outfile._color_bar.set_label('$\\rho_t$')
self.outfile.close()
if self.laser_field_name is not None:
self.outfile.field_name = self.laser_field_name
self.outfile.open()
if self.outfile.num_dimensions >= 3:
self.outfile.read_data_slice(dir=self.dir)
else:
self.outfile.read_data()
if if_laser_profile:
self.outfile.data_profile2d()
self.outfile.plot_data(
h_fig,
h_ax,
cmap=my_cmap.cmap_lower_range_transparent(
plt.cm.Reds,
transparency_transition_region=[0.15, 0.4]))
else:
self.outfile.plot_data(
h_fig, h_ax, cmap=my_cmap.cmap_middle_range_transparent())
self.outfile._color_bar.set_label('$E_L$')
self.outfile.close()
if self.if_e1:
self.outfile.field_name = 'e1'
self.outfile.open()
self.outfile.read_data_lineout()
self.outfile.plot_data(h_fig,
h_ax,
if_ylabel=False,
multiple=self.e1_multiple,
c='r',
ls='-')
self.outfile.close()
if self.if_psi:
self.outfile.field_name = 'psi'
if not os.path.isfile(self.outfile.path_filename):
warnings.warn(
'Psi file not found. Try to get psi by integrating Ez.')
# No psi file, get psi by integrating e1 if e1 is already read
if self.if_e1:
if self.code_name != 'quickpic':
# For OSIRIS and HiPACE, psi is e1 integration from right to left
e1 = np.flip(self.outfile._data)
else:
e1 = self.outfile._data
np.cumsum(e1 * self.outfile._axis_slices[0].step,
out=self.outfile._data)
if self.code_name != 'quickpic':
# For OSIRIS and HiPACE, flip the data
self.outfile._data = np.flip(self.outfile._data)
else:
warnings.warn('Ez is not read. Please set if_e1 to True.')
else:
# There is psi file, read psi normally
self.outfile.open()
self.outfile.read_data_lineout()
self.outfile.close()
self.outfile.plot_data(h_fig,
h_ax,
if_ylabel=False,
multiple=self.psi_multiple,
c='b',
ls='-')
plt.tight_layout()
return h_fig
