def raw_write_file(device, buf, applet_id, file_index, raw):
logger.debug('Preparing to write file')
size = len(buf)
command = MessageConst.REQUEST_WRITE_RAW_FILE if raw else MessageConst.REQUEST_WRITE_FILE
message = Message(command, [(file_index, 1, 1), (size, 2, 3),
(applet_id, 5, 2)])
send_message(device, message, MessageConst.RESPONSE_WRITE_FILE)
logger.debug('Writing block file data')
write_extended_data(device, buf)
message = Message(MessageConst.REQUEST_CONFIRM_WRITE_FILE)
send_message(device, message, MessageConst.RESPONSE_CONFIRM_WRITE_FILE)
logger.info('Writing file complete')
def clear_file(device, applet_id, file_index):
attrs = get_file_attributes(device, applet_id, file_index)
if attrs is None:
return None
attrs.alloc_size = attrs.min_size = 0
device.dialogue_start()
raw_set_file_attributes(device, attrs, applet_id, file_index)
message = Message(MessageConst.REQUEST_COMMIT, [(file_index, 4, 1),
(applet_id, 5, 2)])
send_message(device, message, MessageConst.RESPONSE_COMMIT)
raw_write_file(device, b'', applet_id, file_index, True)
device.dialogue_end()
def raw_set_file_attributes(device, attrs, applet_id, file_index):
"""
OUT: 0x1d ASMESSAGE_REQUEST_SET_FILE_ATTRIBUTES
IN: 0x5b ASMESSAGE_RESPONSE_SET_FILE_ATTRIBUTES
OUT: 0x02 ASMESSAGE_REQUEST_BLOCK_WRITE
IN: 0x42 ASMESSAGE_RESPONSE_BLOCK_WRITE
OUT: data
IN: 0x43 ASMESSAGE_RESPONSE_BLOCK_WRITE_DONE
"""
assert file_index < 256
logger.debug('Setting file attributes applet_id=%s file_index=%s attrs=%s',
applet_id, file_index, attrs)
message = Message(MessageConst.REQUEST_SET_FILE_ATTRIBUTES,
[(file_index, 1, 4), (applet_id, 5, 2)])
send_message(device, message, MessageConst.RESPONSE_SET_FILE_ATTRIBUTES)
write_extended_data(device, attrs.to_raw())
def raw_read_file(device, applet_id, file_attrs, raw):
"""
Transfer sequence:
OUT: 0x12|0x1c ASMESSAGE_REQUEST_READ_FILE | ASMESSAGE_REQUEST_READ_RAW_FILE
IN: 0x53 ASMESSAGE_RESPONSE_READ_FILE
[block read sequence]
"""
size = file_attrs.alloc_size
index = file_attrs.file_index
logger.info('Requesting to read a file at applet_id=%s, file_index=%s',
applet_id, index)
command = MessageConst.REQUEST_READ_RAW_FILE if raw else MessageConst.REQUEST_READ_FILE
message = Message(command, [(size, 1, 3), (index, 4, 1),
(applet_id, 5, 2)])
send_message(device, message)
return read_extended_data(device, size)
def read_extended_data(device, size):
"""
Read binary data blocks in response to some other command, handling segmentation
and checksum validation.
The command sequence is:
While data left to read
OUT: 0x10 ASMESSAGE_REQUEST_BLOCK_READ
IN: 0x4d ASMESSAGE_RESPONSE_BLOCK_READ
OUT: data
"""
logger.debug('Reading extended data')
remaining = size
message = Message(MessageConst.REQUEST_BLOCK_READ, [])
result = util.create_buffer(0)
while remaining > 0:
response = send_message(device, message)
if response.command() == MessageConst.RESPONSE_BLOCK_READ_EMPTY:
break
if response.command() == MessageConst.RESPONSE_BLOCK_READ:
blocksize = response.argument(1, 4)
checksum = response.argument(5, 2)
buf = device.read(blocksize)
assert calculate_data_checksum(buf) == checksum
result.extend(buf)
remaining = remaining - len(buf)
else:
raise NeotoolsError('Unexpected response %s' % response)
return result.tobytes()
def set_settings(device, applet_id, settings):
settings_buf = settings.to_raw()
checksum = calculate_data_checksum(settings_buf)
device.dialogue_start()
logger.info('Requesting to write settings for applet_id=%s', applet_id)
message = Message(MessageConst.REQUEST_SET_SETTINGS,
[(len(settings_buf), 1, 4), (checksum, 5, 2)])
send_message(device, message, MessageConst.RESPONSE_BLOCK_WRITE)
logger.info('Writing settings')
device.write(settings_buf)
receive_message(device, MessageConst.RESPONSE_BLOCK_WRITE_DONE)
message = Message(MessageConst.REQUEST_SET_APPLET, [(0, 1, 4),
(applet_id, 5, 2)])
send_message(device, message, MessageConst.RESPONSE_SET_APPLET)
device.dialogue_end()
def flip_to_keyboard_mode(self):
logger.info('Switching Neo to keyboard mode')
self.dialogue_start()
message = Message(MessageConst.REQUEST_RESTART, [])
response = send_message(self, message)
assert_success(response, MessageConst.RESPONSE_RESTART)
self.dialogue_end()
def get_system_memory(device):
device.dialogue_start()
message = Message(MessageConst.REQUEST_GET_AVAIL_SPACE, [])
response = send_message(device, message)
assert response.command() == MessageConst.RESPONSE_GET_AVAIL_SPACE
result = {
'free_rom': response.argument(1, 4),
'free_ram': response.argument(5, 2) * 256
}
device.dialogue_end()
return result
def create_file(device, filename, password, data, applet_id):
"""
Create a new file.
The sequence for creating a new file is a little counter intuitive, starting with the file attributes:
--> REQUEST_SET_FILE_ATTRIBUTES ; set up the attributes (see rawWriteAttributes())
<-- RESPONSE_SET_FILE_ATTRIBUTES
--> REQUEST_BLOCK_WRITE
--> Attribute data
<-- RESPONSE_BLOCK_WRITE_DONE
--> REQUEST_COMMIT ; create the file
<-- RESPONSE_COMMIT
--> REQUEST_WRITE_RAW_FILE ; the following sequence is as for writing an existing file (see rawWriteFile())
<-- RESPONSE_WRITE_FILE
--> REQUEST_BLOCK_WRITE
--> File data
<-- RESPONSE_BLOCK_WRITE_DONE
--> REQUEST_CONFIRM_WRITE_FILE
<-- RESPONSE_CONFIRM_WRITE_FILE
:param device:
:param filename:
:param password:
:param data: The buffer to write.
:param applet_id:
:return: The new FileAttributes.
"""
usage = get_applet_resource_usage(device, applet_id)
system_memory = get_system_memory(device)
if isinstance(data, str):
data = data.encode('utf-8')
size = len(data)
if size + 1024 > system_memory['free_ram']:
# REVIEW: arbitrarily choosing to keep at least 1k unused on the device
raise NeotoolsError('The device does not have enough RAM')
device.dialogue_start()
file_index = usage['file_count'] + 1
# The space is unbound, it is not index
attrs = FileAttributes(file_index, filename, 0, password, size, size, 0)
raw_set_file_attributes(device, attrs, applet_id, file_index)
# Sending this message appears to bind the attributes to a new file -
# not sending it will still result in a new file, but the attributes will not be correct.
message = Message(MessageConst.REQUEST_COMMIT, [(file_index, 4, 1),
(applet_id, 5, 2)])
response = send_message(device, message, MessageConst.RESPONSE_COMMIT)
raw_write_file(device, data, applet_id, file_index, True)
device.dialogue_end()
def get_applet_resource_usage(device, applet_id):
device.dialogue_start()
message = Message(MessageConst.REQUEST_GET_USED_SPACE, [(0x00000001, 1, 4),
(applet_id, 5, 2)])
response = send_message(device, message,
MessageConst.RESPONSE_GET_USED_SPACE)
result = {
'ram': response.argument(1, 4),
'file_count': response.argument(5, 2)
}
device.dialogue_end()
return result
def get_settings(device, applet_id, flags):
device.dialogue_start()
logger.info('Requesting settings for applet_id=%s, flags=%s', applet_id,
flags)
message = Message(MessageConst.REQUEST_GET_SETTINGS, [(flags, 1, 4),
(applet_id, 5, 2)])
response = send_message(device, message,
MessageConst.RESPONSE_GET_SETTINGS)
response_size = response.argument(1, 4)
expected_checksum = response.argument(5, 2)
logger.info('Retrieving settings data')
result = device.read(response_size)
assert calculate_data_checksum(result) == expected_checksum
device.dialogue_end()
settings_list = AppletSettingsItem.list_from_raw(result)
return AppletSettings(settings_list)
def get_file_attributes(device, applet_id, index):
logger.info('Getting file attributes applet_id=%s index=%s', applet_id,
index)
device.dialogue_start()
message = Message(MessageConst.REQUEST_GET_FILE_ATTRIBUTES,
[(index, 4, 1), (applet_id, 5, 2)])
response = send_message(device, message)
if response.command() == MessageConst.ERROR_PARAMETER:
# Entry not found. This probably just means that the iteration has exceeded the number of files available.
return None
assert_success(response, MessageConst.RESPONSE_GET_FILE_ATTRIBUTES)
length = response.argument(1, 4)
checksum = response.argument(5, 2)
assert length == FILE_ATTRIBUTES_FORMAT['size']
buf = device.read(FILE_ATTRIBUTES_FORMAT['size'])
assert checksum == calculate_data_checksum(buf)
device.dialogue_end()
return FileAttributes.from_raw(index, buf)
def write_extended_data(device, buf):
remaining = len(buf)
offset = 0
while remaining > 0:
blocksize = min(1024, remaining)
block = buf[offset:offset + blocksize]
checksum = calculate_data_checksum(block)
message = Message(MessageConst.REQUEST_BLOCK_WRITE, [(blocksize, 1, 4),
(checksum, 5, 2)])
response = send_message(device, message,
MessageConst.RESPONSE_BLOCK_WRITE)
device.write(block)
response = receive_message(device,
MessageConst.RESPONSE_BLOCK_WRITE_DONE)
offset = offset + blocksize
remaining = remaining - blocksize
def raw_read_applet_headers(device, index):
header_size = APPLET_HEADER_FORMAT['size']
logger.info('Requesting to read list of applets with index=%s', index)
message = Message(MessageConst.REQUEST_LIST_APPLETS,
[(index, 1, 4), (LIST_APPLETS_REQUEST_COUNT, 5, 2)])
response = send_message(device, message)
size = response.argument(1, 4)
expected_checksum = response.argument(5, 2)
if size > LIST_APPLETS_REQUEST_COUNT * header_size:
raise NeotoolsError(
'rawReadAppletHeaders: reply will return too much data!')
if size == 0:
return []
buf = device.read(size)
if len(buf) % header_size != 0:
logger.warning(
'rawReadAppletHeaders: read returned a partial header (expected header size %s, bytes read %s',
header_size, len(buf))
if calculate_data_checksum(buf) != expected_checksum:
raise NeotoolsError('rawReadAppletHeaders: data checksum error')
return buf