def process_response_headers(self, response_headers):
"""
Decode the response headers and create appropriate metics based on the
header values. The response_headers are passed in as a list of tuples.
[(HEADER_NAME0, HEADER_VALUE0), (HEADER_NAME1, HEADER_VALUE1)]
"""
if not self.settings.cross_application_tracer.enabled:
return
appdata = None
try:
for k, v in response_headers:
if k.upper() == 'X-NEWRELIC-APP-DATA':
appdata = simplejson.loads(
deobfuscate(v, self.settings.encoding_key),
encoding='UTF-8')
break
if appdata:
self.params['cross_process_id'] = appdata[0]
self.params['external_txn_name'] = appdata[1]
self.params['transaction_guid'] = appdata[5]
except Exception:
pass
def process_response_headers(self, response_headers):
"""
Decode the response headers and create appropriate metics based on the
header values. The response_headers are passed in as a list of tuples.
[(HEADER_NAME0, HEADER_VALUE0), (HEADER_NAME1, HEADER_VALUE1)]
"""
if not self.settings.cross_application_tracer.enabled:
return
appdata = None
try:
for k, v in response_headers:
if k.upper() == 'X-NEWRELIC-APP-DATA':
appdata = simplejson.loads(deobfuscate(
v, self.settings.encoding_key),
encoding='UTF-8')
break
if appdata:
self.params['cross_process_id'] = appdata[0]
self.params['external_txn_name'] = appdata[1]
self.params['transaction_guid'] = appdata[5]
except Exception:
pass
def process_txn_header(self, environ):
encoded_txn_header = environ.get('HTTP_X_NEWRELIC_TRANSACTION')
if encoded_txn_header:
try:
decoded_txn_header = simplejson.loads(deobfuscate(
encoded_txn_header, self._settings.encoding_key),
encoding='UTF-8')
except Exception:
decoded_txn_header = None
return decoded_txn_header
def process_txn_header(self, environ):
encoded_txn_header = environ.get('HTTP_X_NEWRELIC_TRANSACTION')
if encoded_txn_header:
try:
decoded_txn_header = simplejson.loads(
deobfuscate(encoded_txn_header,
self._settings.encoding_key),
encoding='UTF-8')
except Exception:
decoded_txn_header = None
return decoded_txn_header
def send_request(session, url, method, license_key, agent_run_id=None,
payload=()):
"""Constructs and sends a request to the data collector."""
params = {}
headers = {}
config = {}
settings = global_settings()
start = time.time()
# Validate that the license key was actually set and if not replace
# it with a string which makes it more obvious it was not set.
if not license_key:
license_key = 'NO LICENSE KEY WAS SET IN AGENT CONFIGURATION'
# The agent formats requests and is able to handle responses for
# protocol version 12.
params['method'] = method
params['license_key'] = license_key
params['protocol_version'] = '12'
params['marshal_format'] = 'json'
if agent_run_id:
params['run_id'] = str(agent_run_id)
headers['User-Agent'] = USER_AGENT
headers['Content-Encoding'] = 'identity'
# Set up definitions for proxy server in case that has been set.
proxies = proxy_server()
# At this time we use JSON content encoding for the data being
# sent. Ensure that normal byte strings are interpreted as Latin-1
# and that the final result is ASCII so that don't need to worry
# about converting back to bytes again. We set the default fallback
# encoder to treat any iterable as a list. Unfortunately the JSON
# library can't use it as an iterable and so means that generator
# will be consumed up front and everything collected in memory as a
# list before then converting to JSON.
#
# If an error does occur when encoding the JSON, then it isn't
# likely going to work later on in a subsequent request with same
# data, even if aggregated with other data, so we need to log the
# details and then flag that data should be thrown away. Don't mind
# being noisy in the the log in this situation as it would indicate
# a problem with the implementation of the agent.
try:
with InternalTrace('Supportability/Collector/JSON/Encode/%s' % method):
data = simplejson.dumps(payload, ensure_ascii=True,
encoding='Latin-1', namedtuple_as_object=False,
default=lambda o: list(iter(o)))
except Exception:
_logger.exception('Error encoding data for JSON payload for '
'method %r with payload of %r. Please report this problem '
'to New Relic support.', method, payload)
raise DiscardDataForRequest(str(sys.exc_info()[1]))
# Log details of call and/or payload for debugging. Use the JSON
# encoded value so know that what is encoded is correct.
if settings.debug.log_data_collector_payloads:
_logger.debug('Calling data collector with url=%r, method=%r and '
'payload=%r.', url, method, data)
elif settings.debug.log_data_collector_calls:
_logger.debug('Calling data collector with url=%r and method=%r.',
url, method)
# Compress the serialized JSON being sent as content if over 64KiB
# in size. If less than 2MB in size compress for speed. If over
# 2MB then compress for smallest size. This parallels what the Ruby
# agent does.
if len(data) > 64*1024:
headers['Content-Encoding'] = 'deflate'
level = (len(data) < 2000000) and 1 or 9
internal_metric('Supportability/Collector/ZLIB/Bytes/%s' % method,
len(data))
with InternalTrace('Supportability/Collector/ZLIB/Compress/'
'%s' % method):
data = zlib.compress(six.b(data), level)
# If there is no requests session object provided for making
# requests create one now. We want to close this as soon as we
# are done with it.
auto_close_session = False
if not session:
session = requests.session()
auto_close_session = True
# The 'requests' library can raise a number of exception derived
# from 'RequestException' before we even manage to get a connection
# to the data collector.
#
# The data collector can the generate a number of different types of
# HTTP errors for requests. These are:
#
# 400 Bad Request - For incorrect method type or incorrectly
# construct parameters. We should not get this and if we do it would
# likely indicate a problem with the implementation of the agent.
#
# 413 Request Entity Too Large - Where the request content was too
# large. The limits on number of nodes in slow transaction traces
# should in general prevent this, but not everything has size limits
# and so rogue data could still blow things out. Same data is not
# going to work later on in a subsequent request, even if aggregated
# with other data, so we need to log the details and then flag that
# data should be thrown away.
#
# 415 Unsupported Media Type - This occurs when the JSON which was
# sent can't be decoded by the data collector. If this is a true
# problem with the JSON formatting, then sending again, even if
# aggregated with other data, may not work, so we need to log the
# details and then flag that data should be thrown away.
#
# 503 Service Unavailable - This occurs when data collector, or core
# application is being restarted and not in state to be able to
# accept requests. It should be a transient issue so should be able
# to retain data and try again.
internal_metric('Supportability/Collector/Output/Bytes/%s' % method,
len(data))
try:
# The timeout value in the requests module is only on
# the initial connection and doesn't apply to how long
# it takes to get back a response.
timeout = settings.agent_limits.data_collector_timeout
r = session.post(url, params=params, headers=headers,
proxies=proxies, timeout=timeout, data=data)
# Read the content now so we can force close the socket
# connection if this is a transient session as quickly
# as possible.
content = r.content
except requests.RequestException:
if not settings.proxy_host or not settings.proxy_port:
_logger.warning('Data collector is not contactable. This can be '
'because of a network issue or because of the data '
'collector being restarted. In the event that contact '
'cannot be made after a period of time then please '
'report this problem to New Relic support for further '
'investigation. The error raised was %r.',
sys.exc_info()[1])
else:
_logger.warning('Data collector is not contactable via the proxy '
'host %r on port %r with proxy user of %r. This can be '
'because of a network issue or because of the data '
'collector being restarted. In the event that contact '
'cannot be made after a period of time then please '
'report this problem to New Relic support for further '
'investigation. The error raised was %r.',
settings.proxy_host, settings.proxy_port,
settings.proxy_user, sys.exc_info()[1])
raise RetryDataForRequest(str(sys.exc_info()[1]))
finally:
if auto_close_session:
session.close()
session = None
if r.status_code != 200:
_logger.debug('Received a non 200 HTTP response from the data '
'collector where url=%r, method=%r, license_key=%r, '
'agent_run_id=%r, params=%r, headers=%r, status_code=%r '
'and content=%r.', url, method, license_key, agent_run_id,
params, headers, r.status_code, content)
if r.status_code == 400:
_logger.error('Data collector is indicating that a bad '
'request has been submitted for url %r, headers of %r, '
'params of %r and payload of %r. Please report this '
'problem to New Relic support.', url, headers, params,
payload)
raise DiscardDataForRequest()
elif r.status_code == 413:
_logger.warning('Data collector is indicating that a request for '
'method %r was received where the request content size '
'was over the maximum allowed size limit. The length of '
'the request content was %d. If this keeps occurring on a '
'regular basis, please report this problem to New Relic '
'support for further investigation.', method, len(data))
raise DiscardDataForRequest()
elif r.status_code == 415:
_logger.warning('Data collector is indicating that it was sent '
'malformed JSON data for method %r. If this keeps occurring '
'on a regular basis, please report this problem to New '
'Relic support for further investigation.', method)
if settings.debug.log_malformed_json_data:
if headers['Content-Encoding'] == 'deflate':
data = zlib.uncompress(data)
_logger.info('JSON data which was rejected by the data '
'collector was %r.', data)
raise DiscardDataForRequest(content)
elif r.status_code == 503:
_logger.warning('Data collector is unavailable. This can be a '
'transient issue because of the data collector or our '
'core application being restarted. If the issue persists '
'it can also be indicative of a problem with our servers. '
'In the event that availability of our servers is not '
'restored after a period of time then please report this '
'problem to New Relic support for further investigation.')
raise ServerIsUnavailable()
elif r.status_code != 200:
if not settings.proxy_host or not settings.proxy_port:
_logger.warning('An unexpected HTTP response was received from '
'the data collector of %r for method %r. The payload for '
'the request was %r. If this issue persists then please '
'report this problem to New Relic support for further '
'investigation.', r.status_code, method, payload)
else:
_logger.warning('An unexpected HTTP response was received from '
'the data collector of %r for method %r while connecting '
'via proxy host %r on port %r with proxy user of %r. '
'The payload for the request was %r. If this issue '
'persists then please report this problem to New Relic '
'support for further investigation.', r.status_code,
method, settings.proxy_host, settings.proxy_port,
settings.proxy_user, payload)
raise DiscardDataForRequest()
# Log details of response payload for debugging. Use the JSON
# encoded value so know that what original encoded value was.
duration = time.time() - start
if settings.debug.log_data_collector_payloads:
_logger.debug('Valid response from data collector after %.2f '
'seconds with content=%r.', duration, content)
elif settings.debug.log_data_collector_calls:
_logger.debug('Valid response from data collector after %.2f '
'seconds.', duration)
# If we got this far we should have a legitimate response from the
# data collector. The response is JSON so need to decode it.
# Everything will come back as Unicode. Make sure all strings are
# decoded as 'UTF-8'.
internal_metric('Supportability/Collector/Input/Bytes/%s' % method,
len(content))
try:
with InternalTrace('Supportability/Collector/JSON/Decode/%s' % method):
result = simplejson.loads(content, encoding='UTF-8')
except Exception:
_logger.exception('Error decoding data for JSON payload for '
'method %r with payload of %r. Please report this problem '
'to New Relic support.', method, content)
if settings.debug.log_malformed_json_data:
_logger.info('JSON data received from data collector which '
'could not be decoded was %r.', content)
raise DiscardDataForRequest(str(sys.exc_info()[1]))
# The decoded JSON can be either for a successful response or an
# error. A successful response has a 'return_value' element and an
# error an 'exception' element.
if 'return_value' in result:
return result['return_value']
error_type = result['exception']['error_type']
message = result['exception']['message']
# Now need to check for server side exceptions. The following
# exceptions can occur for abnormal events.
_logger.debug('Received an exception from the data collector where '
'url=%r, method=%r, license_key=%r, agent_run_id=%r, params=%r, '
'headers=%r, error_type=%r and message=%r', url, method,
license_key, agent_run_id, params, headers, error_type,
message)
if error_type == 'NewRelic::Agent::LicenseException':
_logger.error('Data collector is indicating that an incorrect '
'license key has been supplied by the agent. The value '
'which was used by the agent is %r. Please correct any '
'problem with the license key or report this problem to '
'New Relic support.', license_key)
raise DiscardDataForRequest(message)
elif error_type == 'NewRelic::Agent::PostTooBigException':
_logger.warning('Core application is indicating that a request for '
'method %r was received where the request content size '
'was over the maximum allowed size limit. The length of '
'the request content was %d. If this keeps occurring on a '
'regular basis, please report this problem to New Relic '
'support for further investigation.', method, len(data))
raise DiscardDataForRequest(message)
# Server side exceptions are also used to inform the agent to
# perform certain actions such as restart when server side
# configuration has changed for this application or when agent is
# being disabled remotely for some reason.
if error_type == 'NewRelic::Agent::ForceRestartException':
_logger.info('An automatic internal agent restart has been '
'requested by the data collector for the application '
'where the agent run was %r. The reason given for the '
'forced restart is %r.', agent_run_id, message)
raise ForceAgentRestart(message)
elif error_type == 'NewRelic::Agent::ForceDisconnectException':
_logger.critical('Disconnection of the agent has been requested by '
'the data collector for the application where the '
'agent run was %r. The reason given for the forced '
'disconnection is %r. Please contact New Relic support '
'for further information.', agent_run_id, message)
raise ForceAgentDisconnect(message)
# We received an unexpected server side error we don't know what
# to do with.
_logger.warning('An unexpected server error was received from the '
'data collector for method %r with payload of %r. The error '
'was of type %r with message %r. If this issue persists '
'then please report this problem to New Relic support for '
'further investigation.', method, payload, error_type, message)
raise DiscardDataForRequest(message)