def add_attachments_to_set(self, attachments, attachment_set_id=None): """ Adds one or more attachments to an attachment set. If an `AttachmentSetId` is not specified, a new attachment set is created, and the ID of the set is returned in the response. If an `AttachmentSetId` is specified, the attachments are added to the specified set, if it exists. An attachment set is a temporary container for attachments that are to be added to a case or case communication. The set is available for one hour after it is created; the `ExpiryTime` returned in the response indicates when the set expires. The maximum number of attachments in a set is 3, and the maximum size of any attachment in the set is 5 MB. :type attachment_set_id: string :param attachment_set_id: The ID of the attachment set. If an `AttachmentSetId` is not specified, a new attachment set is created, and the ID of the set is returned in the response. If an `AttachmentSetId` is specified, the attachments are added to the specified set, if it exists. :type attachments: list :param attachments: One or more attachments to add to the set. The limit is 3 attachments per set, and the size limit is 5 MB per attachment. """ params = {'attachments': attachments, } if attachment_set_id is not None: params['attachmentSetId'] = attachment_set_id return self.make_request(action='AddAttachmentsToSet', body=json.dumps(params))
def describe_services(self, service_code_list=None, language=None): """ Returns the current list of AWS services and a list of service categories that applies to each one. You then use service names and categories in your CreateCase requests. Each AWS service has its own set of categories. The service codes and category codes correspond to the values that are displayed in the **Service** and **Category** drop- down lists on the AWS Support Center `Open a new case`_ page. The values in those fields, however, do not necessarily match the service codes and categories returned by the `DescribeServices` request. Always use the service codes and categories obtained programmatically. This practice ensures that you always have the most recent set of service and category codes. :type service_code_list: list :param service_code_list: A JSON-formatted list of service codes available for AWS services. :type language: string :param language: The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them. """ params = {} if service_code_list is not None: params['serviceCodeList'] = service_code_list if language is not None: params['language'] = language return self.make_request(action='DescribeServices', body=json.dumps(params))
def describe_communications(self, case_id, before_time=None, after_time=None, next_token=None, max_results=None): """ Returns communications (and attachments) for one or more support cases. You can use the `AfterTime` and `BeforeTime` parameters to filter by date. You can use the `CaseId` parameter to restrict the results to a particular case. Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error. You can use the `MaxResults` and `NextToken` parameters to control the pagination of the result set. Set `MaxResults` to the number of cases you want displayed on each page, and use `NextToken` to specify the resumption of pagination. :type case_id: string :param case_id: The AWS Support case ID requested or returned in the call. The case ID is an alphanumeric string formatted as shown in this example: case- 12345678910-2013-c4c1d2bf33c5cf47 :type before_time: string :param before_time: The end date for a filtered date search on support case communications. Case communications are available for 12 months after creation. :type after_time: string :param after_time: The start date for a filtered date search on support case communications. Case communications are available for 12 months after creation. :type next_token: string :param next_token: A resumption point for pagination. :type max_results: integer :param max_results: The maximum number of results to return before paginating. """ params = {'caseId': case_id, } if before_time is not None: params['beforeTime'] = before_time if after_time is not None: params['afterTime'] = after_time if next_token is not None: params['nextToken'] = next_token if max_results is not None: params['maxResults'] = max_results return self.make_request(action='DescribeCommunications', body=json.dumps(params))
def describe_trusted_advisor_check_refresh_statuses(self, check_ids): """ Returns the refresh status of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks. :type check_ids: list :param check_ids: The IDs of the Trusted Advisor checks. """ params = {'checkIds': check_ids, } return self.make_request(action='DescribeTrustedAdvisorCheckRefreshStatuses', body=json.dumps(params))
def dump_to_sdb(self, domain_name, item_name): from niftycloud.compat import json sdb = niftycloud.connect_sdb() domain = sdb.lookup(domain_name) if not domain: domain = sdb.create_domain(domain_name) item = domain.new_item(item_name) item.active = False for section in self.sections(): d = {} for option in self.options(section): d[option] = self.get(section, option) item[section] = json.dumps(d) item.save()
def describe_trusted_advisor_check_summaries(self, check_ids): """ Returns the summaries of the results of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks. The response contains an array of TrustedAdvisorCheckSummary objects. :type check_ids: list :param check_ids: The IDs of the Trusted Advisor checks. """ params = {'checkIds': check_ids, } return self.make_request(action='DescribeTrustedAdvisorCheckSummaries', body=json.dumps(params))
def describe_attachment(self, attachment_id): """ Returns the attachment that has the specified ID. Attachment IDs are generated by the case management system when you add an attachment to a case or case communication. Attachment IDs are returned in the AttachmentDetails objects that are returned by the DescribeCommunications operation. :type attachment_id: string :param attachment_id: The ID of the attachment to return. Attachment IDs are returned by the DescribeCommunications operation. """ params = {'attachmentId': attachment_id, } return self.make_request(action='DescribeAttachment', body=json.dumps(params))
def resolve_case(self, case_id=None): """ Takes a `CaseId` and returns the initial state of the case along with the state of the case after the call to ResolveCase completed. :type case_id: string :param case_id: The AWS Support case ID requested or returned in the call. The case ID is an alphanumeric string formatted as shown in this example: case- 12345678910-2013-c4c1d2bf33c5cf47 """ params = {} if case_id is not None: params['caseId'] = case_id return self.make_request(action='ResolveCase', body=json.dumps(params))
def describe_trusted_advisor_checks(self, language): """ Returns information about all available Trusted Advisor checks, including name, ID, category, description, and metadata. You must specify a language code; English ("en") and Japanese ("ja") are currently supported. The response contains a TrustedAdvisorCheckDescription for each check. :type language: string :param language: The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them. """ params = {'language': language, } return self.make_request(action='DescribeTrustedAdvisorChecks', body=json.dumps(params))
def add_communication_to_case(self, communication_body, case_id=None, cc_email_addresses=None, attachment_set_id=None): """ Adds additional customer communication to an AWS Support case. You use the `CaseId` value to identify the case to add communication to. You can list a set of email addresses to copy on the communication using the `CcEmailAddresses` value. The `CommunicationBody` value contains the text of the communication. The response indicates the success or failure of the request. This operation implements a subset of the behavior on the AWS Support `Your Support Cases`_ web form. :type case_id: string :param case_id: The AWS Support case ID requested or returned in the call. The case ID is an alphanumeric string formatted as shown in this example: case- 12345678910-2013-c4c1d2bf33c5cf47 :type communication_body: string :param communication_body: The body of an email communication to add to the support case. :type cc_email_addresses: list :param cc_email_addresses: The email addresses in the CC line of an email to be added to the support case. :type attachment_set_id: string :param attachment_set_id: The ID of a set of one or more attachments for the communication to add to the case. Create the set by calling AddAttachmentsToSet """ params = {'communicationBody': communication_body, } if case_id is not None: params['caseId'] = case_id if cc_email_addresses is not None: params['ccEmailAddresses'] = cc_email_addresses if attachment_set_id is not None: params['attachmentSetId'] = attachment_set_id return self.make_request(action='AddCommunicationToCase', body=json.dumps(params))
def describe_severity_levels(self, language=None): """ Returns the list of severity levels that you can assign to an AWS Support case. The severity level for a case is also a field in the CaseDetails data type included in any CreateCase request. :type language: string :param language: The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them. """ params = {} if language is not None: params['language'] = language return self.make_request(action='DescribeSeverityLevels', body=json.dumps(params))
def describe_trusted_advisor_check_result(self, check_id, language=None): """ Returns the results of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks. The response contains a TrustedAdvisorCheckResult object, which contains these three objects: + TrustedAdvisorCategorySpecificSummary + TrustedAdvisorResourceDetail + TrustedAdvisorResourcesSummary In addition, the response contains these fields: + **Status.** The alert status of the check: "ok" (green), "warning" (yellow), "error" (red), or "not_available". + **Timestamp.** The time of the last refresh of the check. + **CheckId.** The unique identifier for the check. :type check_id: string :param check_id: The unique identifier for the Trusted Advisor check. :type language: string :param language: The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them. """ params = {'checkId': check_id, } if language is not None: params['language'] = language return self.make_request(action='DescribeTrustedAdvisorCheckResult', body=json.dumps(params))
def refresh_trusted_advisor_check(self, check_id): """ Requests a refresh of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks. The response contains a RefreshTrustedAdvisorCheckResult object, which contains these fields: + **Status.** The refresh status of the check: "none", "enqueued", "processing", "success", or "abandoned". + **MillisUntilNextRefreshable.** The amount of time, in milliseconds, until the check is eligible for refresh. + **CheckId.** The unique identifier for the check. :type check_id: string :param check_id: The unique identifier for the Trusted Advisor check. """ params = {'checkId': check_id, } return self.make_request(action='RefreshTrustedAdvisorCheck', body=json.dumps(params))
def describe_cases(self, case_id_list=None, display_id=None, after_time=None, before_time=None, include_resolved_cases=None, next_token=None, max_results=None, language=None, include_communications=None): """ Returns a list of cases that you specify by passing one or more case IDs. In addition, you can filter the cases by date by setting values for the `AfterTime` and `BeforeTime` request parameters. Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error. The response returns the following in JSON format: #. One or more CaseDetails data types. #. One or more `NextToken` values, which specify where to paginate the returned records represented by the `CaseDetails` objects. :type case_id_list: list :param case_id_list: A list of ID numbers of the support cases you want returned. The maximum number of cases is 100. :type display_id: string :param display_id: The ID displayed for a case in the AWS Support Center user interface. :type after_time: string :param after_time: The start date for a filtered date search on support case communications. Case communications are available for 12 months after creation. :type before_time: string :param before_time: The end date for a filtered date search on support case communications. Case communications are available for 12 months after creation. :type include_resolved_cases: boolean :param include_resolved_cases: Specifies whether resolved support cases should be included in the DescribeCases results. The default is false . :type next_token: string :param next_token: A resumption point for pagination. :type max_results: integer :param max_results: The maximum number of results to return before paginating. :type language: string :param language: The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them. :type include_communications: boolean :param include_communications: Specifies whether communications should be included in the DescribeCases results. The default is true . """ params = {} if case_id_list is not None: params['caseIdList'] = case_id_list if display_id is not None: params['displayId'] = display_id if after_time is not None: params['afterTime'] = after_time if before_time is not None: params['beforeTime'] = before_time if include_resolved_cases is not None: params['includeResolvedCases'] = include_resolved_cases if next_token is not None: params['nextToken'] = next_token if max_results is not None: params['maxResults'] = max_results if language is not None: params['language'] = language if include_communications is not None: params['includeCommunications'] = include_communications return self.make_request(action='DescribeCases', body=json.dumps(params))
def create_case(self, subject, communication_body, service_code=None, severity_code=None, category_code=None, cc_email_addresses=None, language=None, issue_type=None, attachment_set_id=None): """ Creates a new case in the AWS Support Center. This operation is modeled on the behavior of the AWS Support Center `Open a new case`_ page. Its parameters require you to specify the following information: #. **IssueType.** The type of issue for the case. You can specify either "customer-service" or "technical." If you do not indicate a value, the default is "technical." #. **ServiceCode.** The code for an AWS service. You obtain the `ServiceCode` by calling DescribeServices. #. **CategoryCode.** The category for the service defined for the `ServiceCode` value. You also obtain the category code for a service by calling DescribeServices. Each AWS service defines its own set of category codes. #. **SeverityCode.** A value that indicates the urgency of the case, which in turn determines the response time according to your service level agreement with AWS Support. You obtain the SeverityCode by calling DescribeSeverityLevels. #. **Subject.** The **Subject** field on the AWS Support Center `Open a new case`_ page. #. **CommunicationBody.** The **Description** field on the AWS Support Center `Open a new case`_ page. #. **AttachmentSetId.** The ID of a set of attachments that has been created by using AddAttachmentsToSet. #. **Language.** The human language in which AWS Support handles the case. English and Japanese are currently supported. #. **CcEmailAddresses.** The AWS Support Center **CC** field on the `Open a new case`_ page. You can list email addresses to be copied on any correspondence about the case. The account that opens the case is already identified by passing the AWS Credentials in the HTTP POST method or in a method or function call from one of the programming languages supported by an `AWS SDK`_. A successful CreateCase request returns an AWS Support case number. Case numbers are used by the DescribeCases operation to retrieve existing AWS Support cases. :type subject: string :param subject: The title of the AWS Support case. :type service_code: string :param service_code: The code for the AWS service returned by the call to DescribeServices. :type severity_code: string :param severity_code: The code for the severity level returned by the call to DescribeSeverityLevels. :type category_code: string :param category_code: The category of problem for the AWS Support case. :type communication_body: string :param communication_body: The communication body text when you create an AWS Support case by calling CreateCase. :type cc_email_addresses: list :param cc_email_addresses: A list of email addresses that AWS Support copies on case correspondence. :type language: string :param language: The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them. :type issue_type: string :param issue_type: The type of issue for the case. You can specify either "customer-service" or "technical." If you do not indicate a value, the default is "technical." :type attachment_set_id: string :param attachment_set_id: The ID of a set of one or more attachments for the case. Create the set by using AddAttachmentsToSet. """ params = { 'subject': subject, 'communicationBody': communication_body, } if service_code is not None: params['serviceCode'] = service_code if severity_code is not None: params['severityCode'] = severity_code if category_code is not None: params['categoryCode'] = category_code if cc_email_addresses is not None: params['ccEmailAddresses'] = cc_email_addresses if language is not None: params['language'] = language if issue_type is not None: params['issueType'] = issue_type if attachment_set_id is not None: params['attachmentSetId'] = attachment_set_id return self.make_request(action='CreateCase', body=json.dumps(params))