def render(args):
from nodebox.graphics import BezierPath, strokewidth, fill, directed, push, translate, rotate, pop, drawpath
geom2d = getPropValue(args, 'inputs', 'geometry')
# Do the drawing here!!
path = BezierPath()
strokewidth(width=1)
fill(0)
ps = geom2d.points
for b_path in geom2d.bezier_paths:
if len(b_path) > 4:
path.moveto(*geom2d.points[b_path[0]])
for p_num in xrange((len(b_path) - 1) // 3):
# debugPrint b_path,p_num
path.curveto(ps[b_path[p_num * 3 + 1]][0], ps[b_path[p_num * 3 + 1]][1], ps[b_path[p_num * 3 + 2]][0], ps[b_path[p_num * 3 + 2]][1] , ps[b_path[p_num * 3 + 3]][0], ps[b_path[p_num * 3 + 3]][1]
)
# points = path.points(amount=len(glyphs), start=0.05, end=0.95)
points = path.points(amount=0, start=0.05, end=0.95)
for angle, pt in directed(points):
push()
translate(pt.x, pt.y)
rotate(angle)
pop()
drawpath(path, fill=None, stroke=(0, 0, 0, 1))
def contours(path):
"""Returns a list of contours in the path.
A contour is a sequence of lines and curves
separated from the next contour by a MOVETO.
For example, the glyph "o" has two contours:
the inner circle and the outer circle.
>>> path = BezierPath(None)
>>> path.moveto(0, 0)
>>> path.lineto(100, 100)
>>> len(contours(path))
1
A new contour is defined as something that starts with a moveto:
>>> path.moveto(50, 50)
>>> path.curveto(150, 150, 50, 250, 80, 95)
>>> len(contours(path))
2
Empty moveto's don't do anything:
>>> path.moveto(50, 50)
>>> path.moveto(50, 50)
>>> len(contours(path))
2
It doesn't matter if the path is closed or open:
>>> path.closepath()
>>> len(contours(path))
2
"""
contours = []
current_contour = None
empty = True
for i, el in enumerate(path):
if el.cmd == MOVETO:
if not empty:
contours.append(current_contour)
current_contour = BezierPath(path._ctx)
current_contour.moveto(el.x, el.y)
empty = True
elif el.cmd == LINETO:
empty = False
current_contour.lineto(el.x, el.y)
elif el.cmd == CURVETO:
empty = False
current_contour.curveto(el.ctrl1.x, el.ctrl1.y, el.ctrl2.x,
el.ctrl2.y, el.x, el.y)
elif el.cmd == CLOSE:
current_contour.closepath()
if not empty:
contours.append(current_contour)
return contours
def contours(path):
"""Returns a list of contours in the path.
A contour is a sequence of lines and curves
separated from the next contour by a MOVETO.
For example, the glyph "o" has two contours:
the inner circle and the outer circle.
>>> path = BezierPath(None)
>>> path.moveto(0, 0)
>>> path.lineto(100, 100)
>>> len(contours(path))
1
A new contour is defined as something that starts with a moveto:
>>> path.moveto(50, 50)
>>> path.curveto(150, 150, 50, 250, 80, 95)
>>> len(contours(path))
2
Empty moveto's don't do anything:
>>> path.moveto(50, 50)
>>> path.moveto(50, 50)
>>> len(contours(path))
2
It doesn't matter if the path is closed or open:
>>> path.closepath()
>>> len(contours(path))
2
"""
contours = []
current_contour = None
empty = True
for i, el in enumerate(path):
if el.cmd == MOVETO:
if not empty:
contours.append(current_contour)
current_contour = BezierPath(path._ctx)
current_contour.moveto(el.x, el.y)
empty = True
elif el.cmd == LINETO:
empty = False
current_contour.lineto(el.x, el.y)
elif el.cmd == CURVETO:
empty = False
current_contour.curveto(el.ctrl1.x, el.ctrl1.y,
el.ctrl2.x, el.ctrl2.y, el.x, el.y)
elif el.cmd == CLOSE:
current_contour.closepath()
if not empty:
contours.append(current_contour)
return contours
def insert_point(path, t):
"""Returns a path copy with an extra point at t.
>>> path = BezierPath(None)
>>> path.moveto(0, 0)
>>> insert_point(path, 0.1)
Traceback (most recent call last):
...
NodeBoxError: The given path is empty
>>> path.moveto(0, 0)
>>> insert_point(path, 0.2)
Traceback (most recent call last):
...
NodeBoxError: The given path is empty
>>> path.lineto(100, 50)
>>> len(path)
2
>>> path = insert_point(path, 0.5)
>>> len(path)
3
>>> path[1]
PathElement(LINETO, ((50.0, 25.0),))
>>> path = BezierPath(None)
>>> path.moveto(0, 100)
>>> path.curveto(0, 50, 100, 50, 100, 100)
>>> path = insert_point(path, 0.5)
>>> path[1]
PathElement(LINETO, ((25.0, 62.5), (0.0, 75.0), (50.0, 62.5))
"""
i, t, closeto = _locate(path, t)
x0 = path[i].x
y0 = path[i].y
p1 = path[i + 1]
p1cmd, x3, y3, x1, y1, x2, y2 = p1.cmd, p1.x, p1.y, p1.ctrl1.x, p1.ctrl1.y, p1.ctrl2.x, p1.ctrl2.y
if p1cmd == CLOSE:
pt_cmd = LINETO
pt_x, pt_y = linepoint(t, x0, y0, closeto.x, closeto.y)
elif p1cmd == LINETO:
pt_cmd = LINETO
pt_x, pt_y = linepoint(t, x0, y0, x3, y3)
elif p1cmd == CURVETO:
pt_cmd = CURVETO
pt_x, pt_y, pt_c1x, pt_c1y, pt_c2x, pt_c2y, pt_h1x, pt_h1y, pt_h2x, pt_h2y = \
curvepoint(t, x0, y0, x1, y1, x2, y2, x3, y3, True)
else:
raise NodeBoxError, "Locate should not return a MOVETO"
new_path = BezierPath(None)
new_path.moveto(path[0].x, path[0].y)
for j in range(1, len(path)):
if j == i + 1:
if pt_cmd == CURVETO:
new_path.curveto(pt_h1x, pt_h1y, pt_c1x, pt_c1y, pt_x, pt_y)
new_path.curveto(pt_c2x, pt_c2y, pt_h2x, pt_h2y, path[j].x,
path[j].y)
elif pt_cmd == LINETO:
new_path.lineto(pt_x, pt_y)
if path[j].cmd != CLOSE:
new_path.lineto(path[j].x, path[j].y)
else:
new_path.closepath()
else:
raise NodeBoxError, "Didn't expect pt_cmd %s here" % pt_cmd
else:
if path[j].cmd == MOVETO:
new_path.moveto(path[j].x, path[j].y)
if path[j].cmd == LINETO:
new_path.lineto(path[j].x, path[j].y)
if path[j].cmd == CURVETO:
new_path.curveto(path[j].ctrl1.x, path[j].ctrl1.y,
path[j].ctrl2.x, path[j].ctrl2.y, path[j].x,
path[j].y)
if path[j].cmd == CLOSE:
new_path.closepath()
return new_path
def findpath(points, curvature=1.0):
"""Constructs a path between the given list of points.
Interpolates the list of points and determines
a smooth bezier path betweem them.
The curvature parameter offers some control on
how separate segments are stitched together:
from straight angles to smooth curves.
Curvature is only useful if the path has more than three points.
"""
# The list of points consists of Point objects,
# but it shouldn't crash on something straightforward
# as someone supplying a list of (x,y)-tuples.
from types import TupleType
for i, pt in enumerate(points):
if type(pt) == TupleType:
points[i] = Point(pt[0], pt[1])
if len(points) == 0: return None
if len(points) == 1:
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
return path
if len(points) == 2:
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
path.lineto(points[1].x, points[1].y)
return path
# Zero curvature means straight lines.
curvature = max(0, min(1, curvature))
if curvature == 0:
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
for i in range(len(points)):
path.lineto(points[i].x, points[i].y)
return path
curvature = 4 + (1.0 - curvature) * 40
dx = {0: 0, len(points) - 1: 0}
dy = {0: 0, len(points) - 1: 0}
bi = {1: -0.25}
ax = {1: (points[2].x - points[0].x - dx[0]) / 4}
ay = {1: (points[2].y - points[0].y - dy[0]) / 4}
for i in range(2, len(points) - 1):
bi[i] = -1 / (curvature + bi[i - 1])
ax[i] = -(points[i + 1].x - points[i - 1].x - ax[i - 1]) * bi[i]
ay[i] = -(points[i + 1].y - points[i - 1].y - ay[i - 1]) * bi[i]
r = range(1, len(points) - 1)
r.reverse()
for i in r:
dx[i] = ax[i] + dx[i + 1] * bi[i]
dy[i] = ay[i] + dy[i + 1] * bi[i]
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
for i in range(len(points) - 1):
path.curveto(points[i].x + dx[i], points[i].y + dy[i],
points[i + 1].x - dx[i + 1], points[i + 1].y - dy[i + 1],
points[i + 1].x, points[i + 1].y)
return path
def insert_point(path, t):
"""Returns a path copy with an extra point at t.
>>> path = BezierPath(None)
>>> path.moveto(0, 0)
>>> insert_point(path, 0.1)
Traceback (most recent call last):
...
NodeBoxError: The given path is empty
>>> path.moveto(0, 0)
>>> insert_point(path, 0.2)
Traceback (most recent call last):
...
NodeBoxError: The given path is empty
>>> path.lineto(100, 50)
>>> len(path)
2
>>> path = insert_point(path, 0.5)
>>> len(path)
3
>>> path[1]
PathElement(LINETO, ((50.0, 25.0),))
>>> path = BezierPath(None)
>>> path.moveto(0, 100)
>>> path.curveto(0, 50, 100, 50, 100, 100)
>>> path = insert_point(path, 0.5)
>>> path[1]
PathElement(LINETO, ((25.0, 62.5), (0.0, 75.0), (50.0, 62.5))
"""
i, t, closeto = _locate(path, t)
x0 = path[i].x
y0 = path[i].y
p1 = path[i+1]
p1cmd, x3, y3, x1, y1, x2, y2 = p1.cmd, p1.x, p1.y, p1.ctrl1.x, p1.ctrl1.y, p1.ctrl2.x, p1.ctrl2.y
if p1cmd == CLOSE:
pt_cmd = LINETO
pt_x, pt_y = linepoint(t, x0, y0, closeto.x, closeto.y)
elif p1cmd == LINETO:
pt_cmd = LINETO
pt_x, pt_y = linepoint(t, x0, y0, x3, y3)
elif p1cmd == CURVETO:
pt_cmd = CURVETO
pt_x, pt_y, pt_c1x, pt_c1y, pt_c2x, pt_c2y, pt_h1x, pt_h1y, pt_h2x, pt_h2y = \
curvepoint(t, x0, y0, x1, y1, x2, y2, x3, y3, True)
else:
raise NodeBoxError, "Locate should not return a MOVETO"
new_path = BezierPath(None)
new_path.moveto(path[0].x, path[0].y)
for j in range(1, len(path)):
if j == i+1:
if pt_cmd == CURVETO:
new_path.curveto(pt_h1x, pt_h1y,
pt_c1x, pt_c1y,
pt_x, pt_y)
new_path.curveto(pt_c2x, pt_c2y,
pt_h2x, pt_h2y,
path[j].x, path[j].y)
elif pt_cmd == LINETO:
new_path.lineto(pt_x, pt_y)
if path[j].cmd != CLOSE:
new_path.lineto(path[j].x, path[j].y)
else:
new_path.closepath()
else:
raise NodeBoxError, "Didn't expect pt_cmd %s here" % pt_cmd
else:
if path[j].cmd == MOVETO:
new_path.moveto(path[j].x, path[j].y)
if path[j].cmd == LINETO:
new_path.lineto(path[j].x, path[j].y)
if path[j].cmd == CURVETO:
new_path.curveto(path[j].ctrl1.x, path[j].ctrl1.y,
path[j].ctrl2.x, path[j].ctrl2.y,
path[j].x, path[j].y)
if path[j].cmd == CLOSE:
new_path.closepath()
return new_path
def findpath(points, curvature=1.0):
"""Constructs a path between the given list of points.
Interpolates the list of points and determines
a smooth bezier path betweem them.
The curvature parameter offers some control on
how separate segments are stitched together:
from straight angles to smooth curves.
Curvature is only useful if the path has more than three points.
"""
# The list of points consists of Point objects,
# but it shouldn't crash on something straightforward
# as someone supplying a list of (x,y)-tuples.
from types import TupleType
for i, pt in enumerate(points):
if type(pt) == TupleType:
points[i] = Point(pt[0], pt[1])
if len(points) == 0: return None
if len(points) == 1:
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
return path
if len(points) == 2:
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
path.lineto(points[1].x, points[1].y)
return path
# Zero curvature means straight lines.
curvature = max(0, min(1, curvature))
if curvature == 0:
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
for i in range(len(points)):
path.lineto(points[i].x, points[i].y)
return path
curvature = 4 + (1.0-curvature)*40
dx = {0: 0, len(points)-1: 0}
dy = {0: 0, len(points)-1: 0}
bi = {1: -0.25}
ax = {1: (points[2].x-points[0].x-dx[0]) / 4}
ay = {1: (points[2].y-points[0].y-dy[0]) / 4}
for i in range(2, len(points)-1):
bi[i] = -1 / (curvature + bi[i-1])
ax[i] = -(points[i+1].x-points[i-1].x-ax[i-1]) * bi[i]
ay[i] = -(points[i+1].y-points[i-1].y-ay[i-1]) * bi[i]
r = range(1, len(points)-1)
r.reverse()
for i in r:
dx[i] = ax[i] + dx[i+1] * bi[i]
dy[i] = ay[i] + dy[i+1] * bi[i]
path = BezierPath(None)
path.moveto(points[0].x, points[0].y)
for i in range(len(points)-1):
path.curveto(points[i].x + dx[i],
points[i].y + dy[i],
points[i+1].x - dx[i+1],
points[i+1].y - dy[i+1],
points[i+1].x,
points[i+1].y)
return path
# Add the upper directory (where the nodebox module is) to the search path.
import os, sys;sys.path.insert(0,os.path.join("..",".."))
from nodebox.graphics import canvas, BezierPath, drawpath, triangle, ellipse
from nodebox.graphics import drawpath, color, fill, stroke, nostroke, background, strokewidth
from nodebox.graphics import translate, scale, rotate
from random import random
import squirtle
import amethyst
import amethsvg_MOD01 as svgRead
# couleur dans la librairy 'amethyst'
White= color(amethyst.triplet("white"))
# standard nodeboxGL graphics command
path1 = BezierPath()
path1.moveto(0,0)
path1.curveto(0,16.585,28.321,28.335,28.321,28.335)
# squirtle svg parser
filename = "svg/curve.svg"
path2 = squirtle.SVG(filename)
# svg lib from Nodebox
# The parse() command will return
# a list of the shapes in the SVG file.
paths3 = svgRead.parse(open("svg/curve.svg").read())
def draw(canvas):
#background(color(amethyst.triplet("red")))
import os, sys
sys.path.insert(0, os.path.join("..", ".."))
from nodebox.graphics import canvas, BezierPath, drawpath, triangle, ellipse
from nodebox.graphics import drawpath, color, fill, stroke, nostroke, background, strokewidth
from nodebox.graphics import translate, scale, rotate
from random import random
import squirtle
import amethyst
import amethsvg_MOD01 as svgRead
# couleur dans la librairy 'amethyst'
White = color(amethyst.triplet("white"))
# standard nodeboxGL graphics command
path1 = BezierPath()
path1.moveto(0, 0)
path1.curveto(0, 16.585, 28.321, 28.335, 28.321, 28.335)
# squirtle svg parser
filename = "svg/curve.svg"
path2 = squirtle.SVG(filename)
# svg lib from Nodebox
# The parse() command will return
# a list of the shapes in the SVG file.
paths3 = svgRead.parse(open("svg/curve.svg").read())
def draw(canvas):
#background(color(amethyst.triplet("red")))
