def test_createLine(self):
eq = self.assertEqual
aeq = self.assertAlmostEqual
self.assertRaises(OCCError,
Edge().createLine, (0., 0., 0.), (0., 0., 0.))
args = \
(
(Vertex(1.,0.,0.), Vertex(-1.,0.,0.)),
((1.,0.,0.), (-1.,0.,0.)),
((0.,1.,0.), (0.,-1.,0.)),
((0.,0.,1.), (0.,0.,-1.)),
)
for start, end in args:
e1 = Edge().createLine(start, end)
eq(len(e1), 2)
eq(e1.isNull(), False)
eq(e1.isValid(), True)
eq(e1.isDegenerated(), False)
eq(e1.hasPlane(), False)
aeq(e1.length(), 2)
def test_createFace(self):
eq = self.assertAlmostEqual
self.assertRaises(OCCError, Face().createFace, Wire())
# square face
p1 = Vertex(0., 0., 0.)
p2 = Vertex(1., 0., 0.)
p3 = Vertex(1., 1., 0.)
p4 = Vertex(0., 1., 0.)
e1 = Edge().createLine(p1, p2)
e2 = Edge().createLine(p2, p3)
e3 = Edge().createLine(p3, p4)
e4 = Edge().createLine(p4, p1)
w1 = Wire().createWire((e1, e1, e1, e1))
self.assertRaises(OCCError, Face().createFace, w1)
w2 = Wire().createWire((e1, e2, e3, e4))
face = Face().createFace(w2)
self.assertEqual(face.numWires(), 1)
self.assertEqual(face.numFaces(), 1)
eq(face.area(), 1.)
# circular face
e1 = Edge()
center = (0., 0., 0.)
normal = (0., 0., 1.)
radius = 1.
e1.createCircle(center, normal, radius)
face = Face().createFace(e1)
eq(face.area(), pi, places=4)
def test_rotate(self):
eq = self.almostEqual
e1 = Edge().createLine((0., 0., 0.), (1., 0., 0.))
e1.rotate(-.5 * pi, (0., 1., 0.))
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (0., 0., 1.))
e1.rotate(.5 * pi, (0., 1., 0.))
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (1., 0., 0.))
e2 = e1.rotate(-.5 * pi, (0., 1., 0.), copy=True)
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (1., 0., 0.))
v1, v2 = e2
eq(v1, (0., 0., 0.))
eq(v2, (0., 0., 1.))
e1 = Edge().createLine((0., 0., 0.), (1., 0., 0.))
e1.rotate(-.5 * pi, (0., 1., 0.), (.5, 0., 0.))
v1, v2 = e1
eq(v1, (.5, 0., -.5))
eq(v2, (.5, 0., .5))
def test_length(self):
e1 = Edge()
# bug in Cython?
#self.assertRaises(OCCError, e1.length)
e1 = Edge().createLine((0., 0., 0.), (1., 0., 0.))
self.assertAlmostEqual(e1.length(), 1.)
def test_isClosed(self):
eq = self.assertEqual
e1 = Edge().createCircle(center=(0., 0., 0.),
normal=(0., 0., 1.),
radius=1.)
eq(e1.isClosed(), True)
e1 = Edge().createArc((0., 0., 0.), (1., 0., 1.), (1., 0., 0.))
eq(e1.isClosed(), False)
def test_createEllipse(self):
eq = self.assertAlmostEqual
self.assertRaises(OCCError,
Edge().createEllipse, (0., 0., 0.), (0., 0., 1.), 0.,
0.)
e1 = Edge().createEllipse(center=(0., 0., 0.),
normal=(0., 0., 1.),
rMajor=1.,
rMinor=.5)
eq(e1.length(), .5 * sqrt(93. + .5 * sqrt(3.)), 1)
def test_createArc3P(self):
eq = self.assertAlmostEqual
v1 = (0., 0., 0.)
self.assertRaises(OCCError, Edge().createArc3P, v1, v1, v1)
args = \
(
(Vertex(1.,0.,0.), Vertex(-1.,0.,0.), (0.,1.,0.)),
((1.,0.,0.), (-1.,0.,0.), (0.,1.,0.)),
((1.,1.,0.), (-1.,1.,0.), (0.,2.,0.)),
)
for start, end, pnt in args:
e1 = Edge().createArc3P(start, end, pnt)
eq(e1.length(), pi)
def test_createCircle(self):
eq = self.assertAlmostEqual
self.assertRaises(OCCError,
Edge().createCircle, (0., 0., 0.), (0., 0., 1.), -1.)
self.assertRaises(OCCError,
Edge().createCircle, (0., 0., 0.), (0., 0., 1.), 0.)
e1 = Edge()
center = (0., 0., 0.)
normal = (0., 0., 1.)
radius = 1.
e1.createCircle(center, normal, radius)
eq(e1.length(), 2 * pi)
def test_createArc(self):
eq = self.assertAlmostEqual
v1 = (0., 0., 0.)
self.assertRaises(OCCError, Edge().createArc, v1, v1, v1)
args = \
(
(Vertex(0.,0.,0.), Vertex(1.,0.,1.), (1.,0.,0.)),
((0.,0.,0.), (1.,0.,1.), (1.,0.,0.)),
((0.,1.,0.), (1.,1.,1.), (1.,1.,0.)),
)
for start, end, cen in args:
e1 = Edge().createArc(start, end, cen)
eq(e1.length(), .5 * pi)
def test_createSpline(self):
eq = self.almostEqual
pnts = ((0., 0., 0.), (0., 0., 0.), (0., 0., 0.), (0., 0., 0.))
self.assertRaises(OCCError, Edge().createSpline, points=pnts)
start = Vertex(0., 0., 0.)
end = Vertex(1., 0., 0.)
pnts = ((0., 2., 0.), (5., 1.5, 0.))
e1 = Edge().createSpline(start, end, pnts)
v1, v2 = e1
eq(v1, start)
eq(v2, end)
pnts = ((0., 0., 0.), (0., 2., 0.), (5., 1.5, 0.), (1., 0., 0.))
e2 = Edge().createSpline(points=pnts)
self.assertAlmostEqual(e1.length(), e2.length())
def test_createHelix(self):
eq = self.assertAlmostEqual
self.assertRaises(OCCError,
Edge().createHelix,
pitch=.5,
height=0.,
radius=0.,
angle=pi / 5.)
self.assertRaises(OCCError,
Edge().createHelix,
pitch=.5,
height=0.,
radius=.25,
angle=pi / 5.)
e1 = Edge().createHelix(pitch=.5, height=1., radius=.25, angle=pi / 5.)
self.assertEqual(e1.length() > 1., True)
def test_base(self):
eq = self.assertEqual
start, end = Vertex(1., 0., 0.), Vertex(-1., 0., 0.)
e1 = Edge().createLine(start, end)
eq(e1.shapeType() is Edge, True)
eq(e1.isNull(), False)
eq(e1.isValid(), True)
eq(e1.isDegenerated(), False)
eq(e1.hasPlane(), False)
e2 = e1.copy()
eq(e2.isNull(), False)
eq(e2.isValid(), True)
eq(e2.isDegenerated(), False)
eq(e2.hasPlane(), False)
# test hallow copy equallity
eq(e2.isEqual(e1), True)
eq(e2 == e1, True)
eq(e2 != e1, False)
eq(e1.hashCode() == e2.hashCode(), True)
# test copy of underlying geometry
e3 = e1.copy(deepCopy=True)
eq(e3.isEqual(e1), False)
eq(e1.hashCode() == e3.hashCode(), False)
# test serialize
e4 = Edge().fromString(e1.toString())
eq(e4.isEqual(e1), False)
eq(e1.hashCode() == e4.hashCode(), False)
eq(len(e1), 2)
vertices = set((start.hashCode(), end.hashCode()))
for vertex in e1:
hid = vertex.hashCode()
if hid in vertices:
vertices.remove(hid)
eq(len(vertices), 0)
def test_extrude(self):
eq = self.assertAlmostEqual
# square face
p1 = Vertex(0., 0., 0.)
p2 = Vertex(1., 0., 0.)
e1 = Edge().createLine(p1, p2)
face = Face().extrude(e1, (0., 0., 0.), (0., 1., 0.))
eq(face.area(), 1.)
def test_bbox(self):
eq = self.assertEqual
aeq = self.almostEqual
e1 = Edge().createLine((1., -2., 3.), (-1., 2., -3.))
bbox = e1.boundingBox()
eq(bbox.isValid(), True)
aeq(bbox.min, (-1., -2., -3.))
aeq(bbox.max, (1., 2., 3.))
def test_createWire(self):
eq = self.assertEqual
aeq = self.assertAlmostEqual
p1 = Vertex(0., 0., 0.)
p2 = Vertex(1., 0., 0.)
p3 = Vertex(1., 1., 0.)
p4 = Vertex(0., 1., 0.)
e1 = Edge().createLine(p1, p2)
e2 = Edge().createLine(p2, p3)
e3 = Edge().createLine(p3, p4)
e4 = Edge().createLine(p4, p1)
w1 = Wire().createWire((e1, e2, e3, e4))
eq(len(w1), 4)
eq(w1.numVertices(), 4)
eq(w1.isNull(), False)
eq(w1.isValid(), True)
eq(w1.hasPlane(), True)
aeq(w1.length(), 4.)
def test_chamfer(self):
aeq = self.assertAlmostEqual
w1 = Wire()
self.assertRaises(OCCError, w1.chamfer, 1.)
w1 = Wire().createRectangle(width=1., height=1.)
l = w1.length()
w1.chamfer(0.1)
self.assertEqual(w1.length() != l, True)
p1 = Vertex(0., 0., 0.)
p2 = Vertex(1., 0., 0.)
p3 = Vertex(1., 1., 0.)
p4 = Vertex(0., 1., 0.)
e1 = Edge().createLine(p1, p2)
e2 = Edge().createLine(p2, p3)
e3 = Edge().createLine(p3, p4)
e4 = Edge().createLine(p4, p1)
w2 = Wire().createWire((e1, e2, e3, e4))
w2.chamfer(0.1, (p1, p2, p3, p4))
aeq(w1.length(), w2.length())
def test_hasPlane(self):
eq = self.assertEqual
aeq = self.almostEqual
e5 = Edge().createCircle(center=(0., 0., 0.),
normal=(0., 0., 1.),
radius=1.)
eq(e5.hasPlane(), True)
pnt = Point(-1., -1., -1.)
vec = Vector(-1., -1., -1.)
e5.hasPlane(pnt, vec)
aeq(pnt, (0., 0., 0.))
aeq(vec, (0., 0., 1.))
def test_empty(self):
eq = self.assertEqual
e1 = Edge()
self.assertRaises(OCCError, e1.shapeType)
eq(e1.isNull(), True)
eq(e1.isValid(), False)
eq(e1.isDegenerated(), True)
eq(e1.hasPlane(), False)
eq(len(e1), 0)
eq(tuple(e1), ())
m = Transform().translate(1., 2., 3.)
self.assertRaises(OCCError, e1.transform, m)
self.assertRaises(OCCError, e1.translate, (1., 2., 3.))
self.assertRaises(OCCError, e1.rotate, pi, (0., 1., 0.))
self.assertRaises(OCCError, e1.scale, (0., 0., 0.), 2.)
def test_mirror(self):
eq = self.almostEqual
e1 = Edge().createLine((0., 0., 0.), (1., 0., 0.))
plane = Plane.fromNormal((0., 0., 0.), (1., 0., 0.))
e1.mirror(plane)
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (-1., 0., 0.))
e2 = e1.mirror(plane, copy=True)
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (-1., 0., 0.))
v1, v2 = e2
eq(v1, (0., 0., 0.))
eq(v2, (1., 0., 0.))
def test_translate(self):
eq = self.almostEqual
e1 = Edge().createLine((-1., -2., -3.), (0., 0., 0.))
e1.translate((1., 2., 3.))
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (1., 2., 3.))
e2 = e1.translate((-1., -2., -3.), copy=True)
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (1., 2., 3.))
v1, v2 = e2
eq(v1, (-1., -2., -3.))
eq(v2, (0., 0., 0.))
def test_scale(self):
eq = self.almostEqual
e1 = Edge().createLine((0., 0., 0.), (1., 0., 1.))
e1.scale((0., 0., 0.), .5)
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (.5, 0., .5))
e2 = e1.scale((0., 0., 0.), 2., copy=True)
v1, v2 = e1
eq(v1, (0., 0., 0.))
eq(v2, (.5, 0., .5))
v1, v2 = e2
eq(v1, (0., 0., 0.))
eq(v2, (1., 0., 1.))
