def test_isGcode(self): from octoprint.gcodefiles import isGcodeFileName filename = "/asdj/wefasdf/junk.stl" result = isGcodeFileName(filename) self.assertFalse(result) filename = "/asdj/wefasdf/junk.gcode" result = isGcodeFileName(filename) self.assertTrue(result)
def test_isGcode(self):
from octoprint.gcodefiles import isGcodeFileName
filename = "/asdj/wefasdf/junk.stl"
result = isGcodeFileName(filename)
self.assertFalse(result)
filename = "/asdj/wefasdf/junk.gcode"
result = isGcodeFileName(filename)
self.assertTrue(result)
def apiLoad():
logger = logging.getLogger(__name__)
if not settings.get("api", "enabled"):
abort(401)
if not "apikey" in request.values.keys():
abort(401)
if request.values["apikey"] != settings.get("api", "key"):
abort(403)
if not "file" in request.files.keys():
abort(400)
# Perform an upload
file = request.files["file"]
if not gcodefiles.isGcodeFileName(file.filename):
abort(400)
destination = FileDestinations.LOCAL
filename, done = gcodeManager.addFile(file, destination)
if filename is None:
logger.warn("Upload via API failed")
abort(500)
# Immediately perform a file select and possibly print too
printAfterSelect = False
if "print" in request.values.keys() and request.values["print"] in valid_boolean_trues:
printAfterSelect = True
filepath = gcodeManager.getAbsolutePath(filename)
if filepath is not None:
printer.selectFile(filepath, False, printAfterSelect)
return jsonify(SUCCESS)
def apiLoad():
logger = logging.getLogger(__name__)
if not settings().get(["api", "enabled"]):
abort(401)
if not "apikey" in request.values.keys():
abort(401)
if request.values["apikey"] != settings().get(["api", "key"]):
abort(403)
if not "file" in request.files.keys():
abort(400)
# Perform an upload
file = request.files["file"]
if not gcodefiles.isGcodeFileName(file.filename):
abort(400)
destination = FileDestinations.LOCAL
filename, done = gcodeManager.addFile(file, destination)
if filename is None:
logger.warn("Upload via API failed")
abort(500)
# Immediately perform a file select and possibly print too
printAfterSelect = False
if "print" in request.values.keys(
) and request.values["print"] in valid_boolean_trues:
printAfterSelect = True
filepath = gcodeManager.getAbsolutePath(filename)
if filepath is not None:
printer.selectFile(filepath, False, printAfterSelect)
return jsonify(SUCCESS)
def _upload(self, path):
class WatchdogFileWrapper(object):
def __init__(self, path):
self._path = path
self.filename = os.path.basename(self._path)
def save(self, target):
util.safeRename(self._path, target)
fileWrapper = WatchdogFileWrapper(path)
# determine current job
currentFilename = None
currentOrigin = None
currentJob = self._printer.getCurrentJob()
if currentJob is not None and "file" in currentJob.keys():
currentJobFile = currentJob["file"]
if "name" in currentJobFile.keys(
) and "origin" in currentJobFile.keys():
currentFilename = currentJobFile["name"]
currentOrigin = currentJobFile["origin"]
# determine future filename of file to be uploaded, abort if it can't be uploaded
futureFilename = self._gcodeManager.getFutureFilename(fileWrapper)
if futureFilename is None or (
not settings().getBoolean(["cura", "enabled"])
and not gcodefiles.isGcodeFileName(futureFilename)):
self._logger.warn("Could not add %s: Invalid file" %
fileWrapper.filename)
return
# prohibit overwriting currently selected file while it's being printed
if futureFilename == currentFilename and not currentOrigin == FileDestinations.SDCARD and self._printer.isPrinting(
) or self._printer.isPaused():
self._logger.warn(
"Could not add %s: Trying to overwrite file that is currently being printed"
% fileWrapper.filename)
return
self._gcodeManager.addFile(fileWrapper, FileDestinations.LOCAL)
def uploadGcodeFile(target):
if not target in [FileDestinations.LOCAL, FileDestinations.SDCARD]:
return make_response("Unknown target: %s" % target, 404)
if not "file" in request.files.keys():
return make_response("No file included", 400)
if target == FileDestinations.SDCARD and not settings().getBoolean(["feature", "sdSupport"]):
return make_response("SD card support is disabled", 404)
file = request.files["file"]
sd = target == FileDestinations.SDCARD
selectAfterUpload = "select" in request.values.keys() and request.values["select"] in valid_boolean_trues
printAfterSelect = "print" in request.values.keys() and request.values["print"] in valid_boolean_trues
if sd:
# validate that all preconditions for SD upload are met before attempting it
if not (printer.isOperational() and not (printer.isPrinting() or printer.isPaused())):
return make_response("Can not upload to SD card, printer is either not operational or already busy", 409)
if not printer.isSdReady():
return make_response("Can not upload to SD card, not yet initialized", 409)
# determine current job
currentFilename = None
currentSd = None
currentJob = printer.getCurrentJob()
if currentJob is not None and "filename" in currentJob.keys() and "sd" in currentJob.keys():
currentFilename = currentJob["filename"]
currentSd = currentJob["sd"]
# determine future filename of file to be uploaded, abort if it can't be uploaded
futureFilename = gcodeManager.getFutureFilename(file)
if futureFilename is None or (not settings().getBoolean(["cura", "enabled"]) and not gcodefiles.isGcodeFileName(futureFilename)):
return make_response("Can not upload file %s, wrong format?" % file.filename, 415)
# prohibit overwriting currently selected file while it's being printed
if futureFilename == currentFilename and sd == currentSd and printer.isPrinting() or printer.isPaused():
return make_response("Trying to overwrite file that is currently being printed: %s" % currentFilename, 409)
filename = None
def fileProcessingFinished(filename, absFilename, destination):
"""
Callback for when the file processing (upload, optional slicing, addition to analysis queue) has
finished.
Depending on the file's destination triggers either streaming to SD card or directly calls selectAndOrPrint.
"""
if destination == FileDestinations.SDCARD:
return filename, printer.addSdFile(filename, absFilename, selectAndOrPrint)
else:
selectAndOrPrint(absFilename, destination)
return filename
def selectAndOrPrint(nameToSelect, destination):
"""
Callback for when the file is ready to be selected and optionally printed. For SD file uploads this is only
the case after they have finished streaming to the printer, which is why this callback is also used
for the corresponding call to addSdFile.
Selects the just uploaded file if either selectAfterUpload or printAfterSelect are True, or if the
exact file is already selected, such reloading it.
"""
sd = destination == FileDestinations.SDCARD
if selectAfterUpload or printAfterSelect or (currentFilename == filename and currentSd == sd):
printer.selectFile(nameToSelect, sd, printAfterSelect)
destination = FileDestinations.SDCARD if sd else FileDestinations.LOCAL
filename, done = gcodeManager.addFile(file, destination, fileProcessingFinished)
if filename is None:
return make_response("Could not upload the file %s" % file.filename, 500)
sdFilename = None
if isinstance(filename, tuple):
filename, sdFilename = filename
eventManager.fire(Events.UPLOAD, {"file": filename, "target": target})
files = {}
if done:
files.update({
FileDestinations.LOCAL: {
"name": filename,
"origin": FileDestinations.LOCAL,
"refs": {
"resource": url_for(".readGcodeFile", target=FileDestinations.LOCAL, filename=filename, _external=True),
"download": url_for("index", _external=True) + "downloads/files/" + FileDestinations.LOCAL + "/" + filename
}
}
})
if sd and sdFilename:
files.update({
FileDestinations.SDCARD: {
"name": sdFilename,
"origin": FileDestinations.SDCARD,
"refs": {
"resource": url_for(".readGcodeFile", target=FileDestinations.SDCARD, filename=sdFilename, _external=True)
}
}
})
return make_response(jsonify(files=files, done=done), 201)
def _monitor(self):
feedbackControls = settings().getFeedbackControls()
pauseTriggers = settings().getPauseTriggers()
feedbackErrors = []
#Open the serial port.
if not self._openSerial():
return
self._log("Connected to: %s, starting monitor" % self._serial)
if self._baudrate == 0:
self._log("Starting baud rate detection")
self._changeState(self.STATE_DETECT_BAUDRATE)
else:
self._changeState(self.STATE_CONNECTING)
#Start monitoring the serial port.
timeout = getNewTimeout("communication")
tempRequestTimeout = getNewTimeout("temperature")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
startSeen = not settings().getBoolean(["feature", "waitForStartOnConnect"])
heatingUp = False
swallowOk = False
supportRepetierTargetTemp = settings().getBoolean(["feature", "repetierTargetTemp"])
while True:
try:
line = self._readline()
if line is None:
break
if line.strip() is not "":
timeout = getNewTimeout("communication")
##~~ Error handling
line = self._handleErrors(line)
##~~ SD file list
# if we are currently receiving an sd file list, each line is just a filename, so just read it and abort processing
if self._sdFileList and isGcodeFileName(line.strip().lower()) and not 'End file list' in line:
filename = line.strip().lower()
if filterNonAscii(filename):
self._logger.warn("Got a file from printer's SD that has a non-ascii filename (%s), that shouldn't happen according to the protocol" % filename)
else:
self._sdFiles.append(filename)
continue
##~~ Temperature processing
if ' T:' in line or line.startswith('T:') or ' T0:' in line or line.startswith('T0:'):
self._processTemperatures(line)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
#If we are waiting for an M109 or M190 then measure the time we lost during heatup, so we can remove that time from our printing time estimate.
if not 'ok' in line:
heatingUp = True
if self._heatupWaitStartTime != 0:
t = time.time()
self._heatupWaitTimeLost = t - self._heatupWaitStartTime
self._heatupWaitStartTime = t
elif supportRepetierTargetTemp:
matchExtr = self._regex_repetierTempExtr.match(line)
matchBed = self._regex_repetierTempBed.match(line)
if matchExtr is not None:
toolNum = int(matchExtr.group(1))
try:
target = float(matchExtr.group(2))
if toolNum in self._temp.keys() and self._temp[toolNum] is not None and isinstance(self._temp[toolNum], tuple):
(actual, oldTarget) = self._temp[toolNum]
self._temp[toolNum] = (actual, target)
else:
self._temp[toolNum] = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
elif matchBed is not None:
try:
target = float(matchBed.group(1))
if self._bedTemp is not None and isinstance(self._bedTemp, tuple):
(actual, oldTarget) = self._bedTemp
self._bedTemp = (actual, target)
else:
self._bedTemp = (None, target)
self._callback.mcTempUpdate(self._temp, self._bedTemp)
except ValueError:
pass
##~~ SD Card handling
elif 'SD init fail' in line or 'volume.init failed' in line or 'openRoot failed' in line:
self._sdAvailable = False
self._sdFiles = []
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Not SD printing' in line:
if self.isSdFileSelected() and self.isPrinting():
# something went wrong, printer is reporting that we actually are not printing right now...
self._sdFilePos = 0
self._changeState(self.STATE_OPERATIONAL)
elif 'SD card ok' in line and not self._sdAvailable:
self._sdAvailable = True
self.refreshSdFiles()
self._callback.mcSdStateChange(self._sdAvailable)
elif 'Begin file list' in line:
self._sdFiles = []
self._sdFileList = True
elif 'End file list' in line:
self._sdFileList = False
self._callback.mcSdFiles(self._sdFiles)
elif 'SD printing byte' in line:
# answer to M27, at least on Marlin, Repetier and Sprinter: "SD printing byte %d/%d"
match = self._regex_sdPrintingByte.search(line)
self._currentFile.setFilepos(int(match.group(1)))
self._callback.mcProgress()
elif 'File opened' in line:
# answer to M23, at least on Marlin, Repetier and Sprinter: "File opened:%s Size:%d"
match = self._regex_sdFileOpened.search(line)
self._currentFile = PrintingSdFileInformation(match.group(1), int(match.group(2)))
elif 'File selected' in line:
# final answer to M23, at least on Marlin, Repetier and Sprinter: "File selected"
if self._currentFile is not None:
self._callback.mcFileSelected(self._currentFile.getFilename(), self._currentFile.getFilesize(), True)
eventManager().fire(Events.FILE_SELECTED, {
"file": self._currentFile.getFilename(),
"origin": self._currentFile.getFileLocation()
})
elif 'Writing to file' in line:
# anwer to M28, at least on Marlin, Repetier and Sprinter: "Writing to file: %s"
self._printSection = "CUSTOM"
self._changeState(self.STATE_PRINTING)
line = "ok"
elif 'Done printing file' in line:
# printer is reporting file finished printing
self._sdFilePos = 0
self._callback.mcPrintjobDone()
self._changeState(self.STATE_OPERATIONAL)
eventManager().fire(Events.PRINT_DONE, {
"file": self._currentFile.getFilename(),
"filename": os.path.basename(self._currentFile.getFilename()),
"origin": self._currentFile.getFileLocation(),
"time": self.getPrintTime()
})
elif 'Done saving file' in line:
self.refreshSdFiles()
##~~ Message handling
elif line.strip() != '' \
and line.strip() != 'ok' and not line.startswith("wait") \
and not line.startswith('Resend:') \
and line != 'echo:Unknown command:""\n' \
and self.isOperational():
self._callback.mcMessage(line)
##~~ Parsing for feedback commands
if feedbackControls:
for name, matcher, template in feedbackControls:
if name in feedbackErrors:
# we previously had an error with that one, so we'll skip it now
continue
try:
match = matcher.search(line)
if match is not None:
formatFunction = None
if isinstance(template, str):
formatFunction = str.format
elif isinstance(template, unicode):
formatFunction = unicode.format
if formatFunction is not None:
self._callback.mcReceivedRegisteredMessage(name, formatFunction(template, *(match.groups("n/a"))))
except:
if not name in feedbackErrors:
self._logger.info("Something went wrong with feedbackControl \"%s\": " % name, exc_info=True)
feedbackErrors.append(name)
pass
##~~ Parsing for pause triggers
if pauseTriggers and not self.isStreaming():
if "enable" in pauseTriggers.keys() and pauseTriggers["enable"].search(line) is not None:
self.setPause(True)
elif "disable" in pauseTriggers.keys() and pauseTriggers["disable"].search(line) is not None:
self.setPause(False)
elif "toggle" in pauseTriggers.keys() and pauseTriggers["toggle"].search(line) is not None:
self.setPause(not self.isPaused())
if "ok" in line and heatingUp:
heatingUp = False
### Baudrate detection
if self._state == self.STATE_DETECT_BAUDRATE:
if line == '' or time.time() > timeout:
if len(self._baudrateDetectList) < 1:
self.close()
self._errorValue = "No more baudrates to test, and no suitable baudrate found."
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
elif self._baudrateDetectRetry > 0:
self._baudrateDetectRetry -= 1
self._serial.write('\n')
self._log("Baudrate test retry: %d" % (self._baudrateDetectRetry))
self._sendCommand("M105")
self._testingBaudrate = True
else:
baudrate = self._baudrateDetectList.pop(0)
try:
self._serial.baudrate = baudrate
self._serial.timeout = settings().getFloat(["serial", "timeout", "detection"])
self._log("Trying baudrate: %d" % (baudrate))
self._baudrateDetectRetry = 5
self._baudrateDetectTestOk = 0
timeout = getNewTimeout("communication")
self._serial.write('\n')
self._sendCommand("M105")
self._testingBaudrate = True
except:
self._log("Unexpected error while setting baudrate: %d %s" % (baudrate, getExceptionString()))
elif 'ok' in line and 'T:' in line:
self._baudrateDetectTestOk += 1
if self._baudrateDetectTestOk < 10:
self._log("Baudrate test ok: %d" % (self._baudrateDetectTestOk))
self._sendCommand("M105")
else:
self._sendCommand("M999")
self._serial.timeout = settings().getFloat(["serial", "timeout", "connection"])
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
else:
self._testingBaudrate = False
### Connection attempt
elif self._state == self.STATE_CONNECTING:
if (line == "" or "wait" in line) and startSeen:
self._sendCommand("M105")
elif "start" in line:
startSeen = True
elif "ok" in line and startSeen:
self._changeState(self.STATE_OPERATIONAL)
if self._sdAvailable:
self.refreshSdFiles()
else:
self.initSdCard()
eventManager().fire(Events.CONNECTED, {"port": self._port, "baudrate": self._baudrate})
elif time.time() > timeout:
self.close()
### Operational
elif self._state == self.STATE_OPERATIONAL or self._state == self.STATE_PAUSED:
#Request the temperature on comm timeout (every 5 seconds) when we are not printing.
if line == "" or "wait" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty():
self._sendCommand(self._commandQueue.get())
else:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
# resend -> start resend procedure from requested line
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
### Printing
elif self._state == self.STATE_PRINTING:
if line == "" and time.time() > timeout:
self._log("Communication timeout during printing, forcing a line")
line = 'ok'
if self.isSdPrinting():
if time.time() > tempRequestTimeout and not heatingUp:
self._sendCommand("M105")
tempRequestTimeout = getNewTimeout("temperature")
if time.time() > sdStatusRequestTimeout and not heatingUp:
self._sendCommand("M27")
sdStatusRequestTimeout = getNewTimeout("sdStatus")
else:
# Even when printing request the temperature every 5 seconds.
if time.time() > tempRequestTimeout and not self.isStreaming():
self._commandQueue.put("M105")
tempRequestTimeout = getNewTimeout("temperature")
if "ok" in line and swallowOk:
swallowOk = False
elif "ok" in line:
if self._resendDelta is not None:
self._resendNextCommand()
elif not self._commandQueue.empty() and not self.isStreaming():
self._sendCommand(self._commandQueue.get())
else:
self._sendNext()
elif line.lower().startswith("resend") or line.lower().startswith("rs"):
if settings().get(["feature", "swallowOkAfterResend"]):
swallowOk = True
self._handleResendRequest(line)
except:
self._logger.exception("Something crashed inside the serial connection loop, please report this in OctoPrint's bug tracker:")
errorMsg = "See octoprint.log for details"
self._log(errorMsg)
self._errorValue = errorMsg
self._changeState(self.STATE_ERROR)
eventManager().fire(Events.ERROR, {"error": self.getErrorString()})
self._log("Connection closed, closing down monitor")
def uploadGcodeFile(target):
if not target in [FileDestinations.LOCAL, FileDestinations.SDCARD]:
return make_response("Unknown target: %s" % target, 404)
if not "file" in request.files.keys():
return make_response("No file included", 400)
if target == FileDestinations.SDCARD and not settings().getBoolean(
["feature", "sdSupport"]):
return make_response("SD card support is disabled", 404)
file = request.files["file"]
sd = target == FileDestinations.SDCARD
selectAfterUpload = "select" in request.values.keys(
) and request.values["select"] in valid_boolean_trues
printAfterSelect = "print" in request.values.keys(
) and request.values["print"] in valid_boolean_trues
if sd:
# validate that all preconditions for SD upload are met before attempting it
if not (printer.isOperational()
and not (printer.isPrinting() or printer.isPaused())):
return make_response(
"Can not upload to SD card, printer is either not operational or already busy",
409)
if not printer.isSdReady():
return make_response(
"Can not upload to SD card, not yet initialized", 409)
# determine current job
currentFilename = None
currentSd = None
currentJob = printer.getCurrentJob()
if currentJob is not None and "filename" in currentJob.keys(
) and "sd" in currentJob.keys():
currentFilename = currentJob["filename"]
currentSd = currentJob["sd"]
# determine future filename of file to be uploaded, abort if it can't be uploaded
futureFilename = gcodeManager.getFutureFilename(file)
if futureFilename is None or (
not settings().getBoolean(["cura", "enabled"])
and not gcodefiles.isGcodeFileName(futureFilename)):
return make_response(
"Can not upload file %s, wrong format?" % file.filename, 415)
# prohibit overwriting currently selected file while it's being printed
if futureFilename == currentFilename and sd == currentSd and printer.isPrinting(
) or printer.isPaused():
return make_response(
"Trying to overwrite file that is currently being printed: %s" %
currentFilename, 409)
filename = None
def fileProcessingFinished(filename, absFilename, destination):
"""
Callback for when the file processing (upload, optional slicing, addition to analysis queue) has
finished.
Depending on the file's destination triggers either streaming to SD card or directly calls selectAndOrPrint.
"""
if destination == FileDestinations.SDCARD:
return filename, printer.addSdFile(filename, absFilename,
selectAndOrPrint)
else:
selectAndOrPrint(absFilename, destination)
return filename
def selectAndOrPrint(nameToSelect, destination):
"""
Callback for when the file is ready to be selected and optionally printed. For SD file uploads this is only
the case after they have finished streaming to the printer, which is why this callback is also used
for the corresponding call to addSdFile.
Selects the just uploaded file if either selectAfterUpload or printAfterSelect are True, or if the
exact file is already selected, such reloading it.
"""
sd = destination == FileDestinations.SDCARD
if selectAfterUpload or printAfterSelect or (
currentFilename == filename and currentSd == sd):
printer.selectFile(nameToSelect, sd, printAfterSelect)
destination = FileDestinations.SDCARD if sd else FileDestinations.LOCAL
filename, done = gcodeManager.addFile(file, destination,
fileProcessingFinished)
if filename is None:
return make_response("Could not upload the file %s" % file.filename,
500)
sdFilename = None
if isinstance(filename, tuple):
filename, sdFilename = filename
eventManager.fire(Events.UPLOAD, {"file": filename, "target": target})
files = {}
if done:
files.update({
FileDestinations.LOCAL: {
"name": filename,
"origin": FileDestinations.LOCAL,
"refs": {
"resource":
url_for(".readGcodeFile",
target=FileDestinations.LOCAL,
filename=filename,
_external=True),
"download":
url_for("index", _external=True) + "downloads/files/" +
FileDestinations.LOCAL + "/" + filename
}
}
})
if sd and sdFilename:
files.update({
FileDestinations.SDCARD: {
"name": sdFilename,
"origin": FileDestinations.SDCARD,
"refs": {
"resource":
url_for(".readGcodeFile",
target=FileDestinations.SDCARD,
filename=sdFilename,
_external=True)
}
}
})
return make_response(jsonify(files=files, done=done), 201)
def _upload(self, path):
class WatchdogFileWrapper(object):
def __init__(self, path):
self._path = path
self.filename = os.path.basename(self._path)
def save(self, target):
util.safeRename(self._path, target)
fileWrapper = WatchdogFileWrapper(path)
# determine current job
currentFilename = None
currentOrigin = None
currentJob = self._printer.getCurrentJob()
if currentJob is not None and "file" in currentJob.keys():
currentJobFile = currentJob["file"]
if "name" in currentJobFile.keys() and "origin" in currentJobFile.keys():
currentFilename = currentJobFile["name"]
currentOrigin = currentJobFile["origin"]
# determine future filename of file to be uploaded, abort if it can't be uploaded
futureFilename = self._gcodeManager.getFutureFilename(fileWrapper)
if futureFilename is None or (not settings().getBoolean(["cura", "enabled"]) and not gcodefiles.isGcodeFileName(futureFilename)):
self._logger.warn("Could not add %s: Invalid file" % fileWrapper.filename)
return
# prohibit overwriting currently selected file while it's being printed
if futureFilename == currentFilename and not currentOrigin == FileDestinations.SDCARD and self._printer.isPrinting() or self._printer.isPaused():
self._logger.warn("Could not add %s: Trying to overwrite file that is currently being printed" % fileWrapper.filename)
return
self._gcodeManager.addFile(fileWrapper, FileDestinations.LOCAL)
def uploadGcodeFile(target):
if not target in [FileDestinations.LOCAL, FileDestinations.SDCARD]:
return make_response("Invalid target: %s" % target, 400)
if "gcode_file" in request.files.keys():
file = request.files["gcode_file"]
sd = target == FileDestinations.SDCARD
selectAfterUpload = "select" in request.values.keys(
) and request.values["select"] in valid_boolean_trues
printAfterSelect = "print" in request.values.keys(
) and request.values["print"] in valid_boolean_trues
# determine current job
currentFilename = None
currentSd = None
currentJob = printer.getCurrentJob()
if currentJob is not None and "filename" in currentJob.keys() and "sd" in currentJob.keys():
currentFilename = currentJob["filename"]
currentSd = currentJob["sd"]
# determine future filename of file to be uploaded, abort if it can't
# be uploaded
futureFilename = gcodeManager.getFutureFilename(file)
if futureFilename is None or (not settings.get("cura", "enabled") and not gcodefiles.isGcodeFileName(futureFilename)):
return make_response("Can not upload file %s, wrong format?" % file.filename, 400)
# prohibit overwriting currently selected file while it's being printed
if futureFilename == currentFilename and sd == currentSd and printer.isPrinting() or printer.isPaused():
return make_response("Trying to overwrite file that is currently being printed: %s" % currentFilename, 403)
filename = None
def fileProcessingFinished(filename, absFilename, destination):
"""
Callback for when the file processing (upload, optional slicing, addition to analysis queue) has
finished.
Depending on the file's destination triggers either streaming to SD card or directly calls selectOrPrint.
"""
sd = destination == FileDestinations.SDCARD
if sd:
printer.addSdFile(filename, absFilename, selectAndOrPrint)
else:
selectAndOrPrint(absFilename, destination)
def selectAndOrPrint(nameToSelect, destination):
"""
Callback for when the file is ready to be selected and optionally printed. For SD file uploads this only
the case after they have finished streaming to the printer, which is why this callback is also used
for the corresponding call to addSdFile.
Selects the just uploaded file if either selectAfterUpload or printAfterSelect are True, or if the
exact file is already selected, such reloading it.
"""
sd = destination == FileDestinations.SDCARD
if selectAfterUpload or printAfterSelect or (currentFilename == filename and currentSd == sd):
printer.selectFile(nameToSelect, sd, printAfterSelect)
destination = FileDestinations.SDCARD if sd else FileDestinations.LOCAL
filename, done = gcodeManager.addFile(
file, destination, fileProcessingFinished)
if filename is None:
return make_response("Could not upload the file %s" % file.filename, 500)
eventManager.fire("Upload", filename)
return jsonify(files=gcodeManager.getAllFileData(), filename=filename, done=done)
else:
return make_response("No gcode_file included", 400)
def uploadGcodeFile(target):
if not target in [FileDestinations.LOCAL, FileDestinations.SDCARD]:
return make_response("Invalid target: %s" % target, 400)
if "gcode_file" in request.files.keys():
file = request.files["gcode_file"]
sd = target == FileDestinations.SDCARD
selectAfterUpload = "select" in request.values.keys(
) and request.values["select"] in valid_boolean_trues
printAfterSelect = "print" in request.values.keys(
) and request.values["print"] in valid_boolean_trues
# determine current job
currentFilename = None
currentSd = None
currentJob = printer.getCurrentJob()
if currentJob is not None and "filename" in currentJob.keys(
) and "sd" in currentJob.keys():
currentFilename = currentJob["filename"]
currentSd = currentJob["sd"]
# determine future filename of file to be uploaded, abort if it can't be uploaded
futureFilename = gcodeManager.getFutureFilename(file)
if futureFilename is None or (
not settings().getBoolean(["cura", "enabled"])
and not gcodefiles.isGcodeFileName(futureFilename)):
return make_response(
"Can not upload file %s, wrong format?" % file.filename, 400)
# prohibit overwriting currently selected file while it's being printed
if futureFilename == currentFilename and sd == currentSd and printer.isPrinting(
) or printer.isPaused():
return make_response(
"Trying to overwrite file that is currently being printed: %s"
% currentFilename, 403)
filename = None
def fileProcessingFinished(filename, absFilename, destination):
"""
Callback for when the file processing (upload, optional slicing, addition to analysis queue) has
finished.
Depending on the file's destination triggers either streaming to SD card or directly calls selectOrPrint.
"""
sd = destination == FileDestinations.SDCARD
if sd:
printer.addSdFile(filename, absFilename, selectAndOrPrint)
else:
selectAndOrPrint(absFilename, destination)
def selectAndOrPrint(nameToSelect, destination):
"""
Callback for when the file is ready to be selected and optionally printed. For SD file uploads this only
the case after they have finished streaming to the printer, which is why this callback is also used
for the corresponding call to addSdFile.
Selects the just uploaded file if either selectAfterUpload or printAfterSelect are True, or if the
exact file is already selected, such reloading it.
"""
sd = destination == FileDestinations.SDCARD
if selectAfterUpload or printAfterSelect or (
currentFilename == filename and currentSd == sd):
printer.selectFile(nameToSelect, sd, printAfterSelect)
destination = FileDestinations.SDCARD if sd else FileDestinations.LOCAL
filename, done = gcodeManager.addFile(file, destination,
fileProcessingFinished)
if filename is None:
return make_response(
"Could not upload the file %s" % file.filename, 500)
eventManager.fire("Upload", filename)
return jsonify(files=gcodeManager.getAllFileData(),
filename=filename,
done=done)
else:
return make_response("No gcode_file included", 400)