class Server():
def __init__(self,
configfile=None,
basedir=None,
host="0.0.0.0",
port=5000,
debug=False,
allowRoot=False,
logConf=None):
self._configfile = configfile
self._basedir = basedir
self._host = host
self._port = port
self._debug = debug
self._allowRoot = allowRoot
self._logConf = logConf
def run(self):
if not self._allowRoot:
self._checkForRoot()
global userManager
global eventManager
global loginManager
global debug
global softwareManager
global VERSION
from tornado.wsgi import WSGIContainer
from tornado.httpserver import HTTPServer
from tornado.ioloop import IOLoop
from tornado.web import Application, FallbackHandler
from astroprint.printfiles.watchdogs import UploadCleanupWatchdogHandler
debug = self._debug
# first initialize the settings singleton and make sure it uses given configfile and basedir if available
self._initSettings(self._configfile, self._basedir)
s = settings()
# then initialize logging
self._initLogging(self._debug, self._logConf)
logger = logging.getLogger(__name__)
if s.getBoolean(["accessControl", "enabled"]):
userManagerName = settings().get(["accessControl", "userManager"])
try:
clazz = util.getClass(userManagerName)
userManager = clazz()
except AttributeError, e:
logger.exception(
"Could not instantiate user manager %s, will run with accessControl disabled!"
% userManagerName)
softwareManager = swManager()
VERSION = softwareManager.versionString
logger.info("Starting AstroBox (%s)" % VERSION)
eventManager = events.eventManager()
printer = printerManager(printerProfileManager().data['driver'])
# configure timelapse
#octoprint.timelapse.configureTimelapse()
app.wsgi_app = ReverseProxied(app.wsgi_app)
app.secret_key = boxrouterManager().boxId
loginManager = LoginManager()
loginManager.session_protection = "strong"
loginManager.user_callback = load_user
if userManager is None:
loginManager.anonymous_user = users.DummyUser
principals.identity_loaders.appendleft(users.dummy_identity_loader)
loginManager.init_app(app)
# setup command triggers
events.CommandTrigger(printer)
if self._debug:
events.DebugEventListener()
if networkManager().isOnline():
softwareManager.checkForcedUpdate()
if self._host is None:
self._host = s.get(["server", "host"])
if self._port is None:
self._port = s.getInt(["server", "port"])
app.debug = self._debug
from octoprint.server.api import api
app.register_blueprint(api, url_prefix="/api")
self._boxrouter = boxrouterManager()
self._router = SockJSRouter(self._createSocketConnection, "/sockjs")
self._discovery = discoveryManager()
def access_validation_factory(validator):
"""
Creates an access validation wrapper using the supplied validator.
:param validator: the access validator to use inside the validation wrapper
:return: an access validation wrapper taking a request as parameter and performing the request validation
"""
def f(request):
"""
Creates a custom wsgi and Flask request context in order to be able to process user information
stored in the current session.
:param request: The Tornado request for which to create the environment and context
"""
wsgi_environ = tornado.wsgi.WSGIContainer.environ(request)
with app.request_context(wsgi_environ):
app.session_interface.open_session(app, flask.request)
loginManager.reload_user()
validator(flask.request)
return f
self._tornado_app = Application(self._router.urls + [
(r"/downloads/timelapse/([^/]*\.mpg)", LargeResponseHandler, {
"path": s.getBaseFolder("timelapse"),
"as_attachment": True
}),
(r"/downloads/files/local/([^/]*\.(gco|gcode))",
LargeResponseHandler, {
"path": s.getBaseFolder("uploads"),
"as_attachment": True
}),
(r"/downloads/logs/([^/]*)", LargeResponseHandler, {
"path": s.getBaseFolder("logs"),
"as_attachment": True,
"access_validation": access_validation_factory(admin_validator)
}),
(r"/downloads/camera/current", UrlForwardHandler, {
"url": s.get(["webcam", "snapshot"]),
"as_attachment": True,
"access_validation": access_validation_factory(user_validator)
}),
(r".*", FallbackHandler, {
"fallback": WSGIContainer(app.wsgi_app)
})
])
self._server = HTTPServer(self._tornado_app)
self._server.listen(self._port, address=self._host)
logger.info("Listening on http://%s:%d" % (self._host, self._port))
eventManager.fire(events.Events.STARTUP)
if s.getBoolean(["serial", "autoconnect"]):
(port, baudrate) = s.get(["serial", "port"
]), s.getInt(["serial", "baudrate"])
connectionOptions = printer.getConnectionOptions()
if port in connectionOptions["ports"]:
printer.connect(port, baudrate)
# start up watchdogs
observer = Observer()
observer.schedule(UploadCleanupWatchdogHandler(),
s.getBaseFolder("uploads"))
observer.start()
try:
IOLoop.instance().start()
except KeyboardInterrupt:
logger.info("Goodbye!")
except:
logger.fatal(
"Now that is embarrassing... Something really really went wrong here. Please report this including the stacktrace below in OctoPrint's bugtracker. Thanks!"
)
logger.exception("Stacktrace follows:")
finally:
observer.stop()
observer.join()
class Server():
def __init__(self,
configfile=None,
basedir=None,
host="0.0.0.0",
port=5000,
debug=False,
allowRoot=False):
self._configfile = configfile
self._basedir = basedir
self._host = host
self._port = port
self._debug = debug
self._allowRoot = allowRoot
def run(self):
if not self._allowRoot:
self._checkForRoot()
global printer
global gcodeManager
global userManager
global eventManager
global loginManager
global debug
from tornado.wsgi import WSGIContainer
from tornado.httpserver import HTTPServer
from tornado.ioloop import IOLoop
from tornado.web import Application, FallbackHandler
debug = self._debug
# first initialize the settings singleton and make sure it uses given configfile and basedir if available
self._initSettings(self._configfile, self._basedir)
# then initialize logging
self._initLogging(self._debug)
logger = logging.getLogger(__name__)
logger.info("Starting OctoPrint %s" % DISPLAY_VERSION)
eventManager = events.eventManager()
gcodeManager = gcodefiles.GcodeManager()
printer = Printer(gcodeManager)
# configure timelapse
octoprint.timelapse.configureTimelapse()
# setup command triggers
events.CommandTrigger(printer)
if self._debug:
events.DebugEventListener()
if settings().getBoolean(["accessControl", "enabled"]):
userManagerName = settings().get(["accessControl", "userManager"])
try:
clazz = util.getClass(userManagerName)
userManager = clazz()
except AttributeError, e:
logger.exception(
"Could not instantiate user manager %s, will run with accessControl disabled!"
% userManagerName)
app.wsgi_app = ReverseProxied(app.wsgi_app)
secret_key = settings().get(["server", "secretKey"])
if not secret_key:
import string
from random import choice
chars = string.ascii_lowercase + string.ascii_uppercase + string.digits
secret_key = "".join(choice(chars) for _ in xrange(32))
settings().set(["server", "secretKey"], secret_key)
settings().save()
app.secret_key = secret_key
loginManager = LoginManager()
loginManager.session_protection = "strong"
loginManager.user_callback = load_user
if userManager is None:
loginManager.anonymous_user = users.DummyUser
principals.identity_loaders.appendleft(users.dummy_identity_loader)
loginManager.init_app(app)
if self._host is None:
self._host = settings().get(["server", "host"])
if self._port is None:
self._port = settings().getInt(["server", "port"])
logger.info("Listening on http://%s:%d" % (self._host, self._port))
app.debug = self._debug
from octoprint.server.api import api
app.register_blueprint(api, url_prefix="/api")
self._router = SockJSRouter(self._createSocketConnection, "/sockjs")
def admin_access_validation(request):
"""
Creates a custom wsgi and Flask request context in order to be able to process user information
stored in the current session.
:param request: The Tornado request for which to create the environment and context
"""
wsgi_environ = tornado.wsgi.WSGIContainer.environ(request)
with app.request_context(wsgi_environ):
app.session_interface.open_session(app, flask.request)
loginManager.reload_user()
admin_validator(flask.request)
self._tornado_app = Application(
self._router.urls +
[(r"/downloads/timelapse/([^/]*\.mpg)", LargeResponseHandler, {
"path": settings().getBaseFolder("timelapse"),
"as_attachment": True
}),
(r"/downloads/files/local/([^/]*\.(gco|gcode|g))",
LargeResponseHandler, {
"path": settings().getBaseFolder("uploads"),
"as_attachment": True
}),
(r"/downloads/logs/([^/]*)", LargeResponseHandler, {
"path": settings().getBaseFolder("logs"),
"as_attachment": True,
"access_validation": admin_access_validation
}),
(r".*", FallbackHandler, {
"fallback": WSGIContainer(app.wsgi_app)
})])
self._server = HTTPServer(self._tornado_app)
self._server.listen(self._port, address=self._host)
eventManager.fire(events.Events.STARTUP)
if settings().getBoolean(["serial", "autoconnect"]):
(port, baudrate) = settings().get(
["serial", "port"]), settings().getInt(["serial", "baudrate"])
connectionOptions = getConnectionOptions()
if port in connectionOptions["ports"]:
printer.connect(port, baudrate)
try:
IOLoop.instance().start()
except KeyboardInterrupt:
logger.info("Goodbye!")
except:
logger.fatal(
"Now that is embarrassing... Something really really went wrong here. Please report this including the stacktrace below in OctoPrint's bugtracker. Thanks!"
)
logger.exception("Stacktrace follows:")
class Server():
def __init__(self,
configfile=None,
basedir=None,
host="0.0.0.0",
port=5000,
debug=False,
allowRoot=False):
self._configfile = configfile
self._basedir = basedir
self._host = host
self._port = port
self._debug = debug
self._allowRoot = allowRoot
def run(self):
if not self._allowRoot:
self._checkForRoot()
global printer
global gcodeManager
global userManager
global eventManager
global loginManager
global debug
from tornado.wsgi import WSGIContainer
from tornado.httpserver import HTTPServer
from tornado.ioloop import IOLoop
from tornado.web import Application, FallbackHandler
debug = self._debug
# first initialize the settings singleton and make sure it uses given configfile and basedir if available
self._initSettings(self._configfile, self._basedir)
# then initialize logging
self._initLogging(self._debug)
logger = logging.getLogger(__name__)
eventManager = events.eventManager()
gcodeManager = gcodefiles.GcodeManager()
printer = Printer(gcodeManager)
# configure timelapse
octoprint.timelapse.configureTimelapse()
# setup system and gcode command triggers
events.SystemCommandTrigger(printer)
events.GcodeCommandTrigger(printer)
if self._debug:
events.DebugEventListener()
if settings().getBoolean(["accessControl", "enabled"]):
userManagerName = settings().get(["accessControl", "userManager"])
try:
clazz = util.getClass(userManagerName)
userManager = clazz()
except AttributeError, e:
logger.exception(
"Could not instantiate user manager %s, will run with accessControl disabled!"
% userManagerName)
app.wsgi_app = ReverseProxied(app.wsgi_app)
app.secret_key = "k3PuVYgtxNm8DXKKTw2nWmFQQun9qceV"
loginManager = LoginManager()
loginManager.session_protection = "strong"
loginManager.user_callback = load_user
if userManager is None:
loginManager.anonymous_user = users.DummyUser
principals.identity_loaders.appendleft(users.dummy_identity_loader)
loginManager.init_app(app)
if self._host is None:
self._host = settings().get(["server", "host"])
if self._port is None:
self._port = settings().getInt(["server", "port"])
logger.info("Listening on http://%s:%d" % (self._host, self._port))
app.debug = self._debug
from octoprint.server.ajax import ajax
from octoprint.server.api import api
app.register_blueprint(ajax, url_prefix="/ajax")
app.register_blueprint(api, url_prefix="/api")
self._router = SockJSRouter(self._createSocketConnection, "/sockjs")
self._tornado_app = Application(
self._router.urls +
[(r"/downloads/timelapse/([^/]*\.mpg)", LargeResponseHandler, {
"path": settings().getBaseFolder("timelapse"),
"as_attachment": True
}),
(r"/downloads/gcode/([^/]*\.(gco|gcode))", LargeResponseHandler, {
"path": settings().getBaseFolder("uploads"),
"as_attachment": True
}),
(r".*", FallbackHandler, {
"fallback": WSGIContainer(app.wsgi_app)
})])
self._server = HTTPServer(self._tornado_app)
self._server.listen(self._port, address=self._host)
eventManager.fire("Startup")
if settings().getBoolean(["serial", "autoconnect"]):
(port, baudrate) = settings().get(
["serial", "port"]), settings().getInt(["serial", "baudrate"])
connectionOptions = getConnectionOptions()
if port in connectionOptions["ports"]:
printer.connect(port, baudrate)
try:
IOLoop.instance().start()
except:
logger.fatal(
"Now that is embarrassing... Something really really went wrong here. Please report this including the stacktrace below in OctoPrint's bugtracker. Thanks!"
)
logger.exception("Stacktrace follows:")
class Server():
def __init__(self,
configfile=None,
basedir=None,
host="0.0.0.0",
port=5000,
debug=False,
allowRoot=False,
logConf=None):
self._configfile = configfile
self._basedir = basedir
self._host = host
self._port = port
self._debug = debug
self._allowRoot = allowRoot
self._logConf = logConf
self._ioLoop = None
def stop(self):
if self._ioLoop:
self._ioLoop.stop()
self._ioLoop = None
def run(self):
if not self._allowRoot:
self._checkForRoot()
global userManager
global eventManager
global loginManager
global debug
global softwareManager
global discoveryManager
global VERSION
global UI_API_KEY
from tornado.wsgi import WSGIContainer
from tornado.httpserver import HTTPServer
from tornado.ioloop import IOLoop
from tornado.web import Application, FallbackHandler
from astroprint.printfiles.watchdogs import UploadCleanupWatchdogHandler
debug = self._debug
# first initialize the settings singleton and make sure it uses given configfile and basedir if available
self._initSettings(self._configfile, self._basedir)
s = settings()
if not s.getBoolean(['api', 'regenerate']) and s.getString(
['api', 'key']):
UI_API_KEY = s.getString(['api', 'key'])
else:
UI_API_KEY = ''.join('%02X' % ord(z) for z in uuid.uuid4().bytes)
# then initialize logging
self._initLogging(self._debug, self._logConf)
logger = logging.getLogger(__name__)
if s.getBoolean(["accessControl", "enabled"]):
userManagerName = s.get(["accessControl", "userManager"])
try:
clazz = util.getClass(userManagerName)
userManager = clazz()
except AttributeError, e:
logger.exception(
"Could not instantiate user manager %s, will run with accessControl disabled!"
% userManagerName)
softwareManager = swManager()
VERSION = softwareManager.versionString
logger.info("Starting AstroBox (%s) - Commit (%s)" %
(VERSION, softwareManager.commit))
from astroprint.migration import migrateSettings
migrateSettings()
manufacturerPkgManager()
ppm = printerProfileManager()
pluginManager().loadPlugins()
eventManager = events.eventManager()
printer = printerManager(ppm.data['driver'])
#Start some of the managers here to make sure there are no thread collisions
from astroprint.network.manager import networkManager
from astroprint.boxrouter import boxrouterManager
networkManager()
boxrouterManager()
# configure timelapse
#octoprint.timelapse.configureTimelapse()
app.wsgi_app = ReverseProxied(app.wsgi_app)
app.secret_key = boxrouterManager().boxId
loginManager = LoginManager()
loginManager.session_protection = "strong"
loginManager.user_callback = load_user
if userManager is None:
loginManager.anonymous_user = users.DummyUser
principals.identity_loaders.appendleft(users.dummy_identity_loader)
loginManager.init_app(app)
# setup command triggers
events.CommandTrigger(printer)
if self._debug:
events.DebugEventListener()
if networkManager().isOnline():
softwareManager.checkForcedUpdate()
if self._host is None:
self._host = s.get(["server", "host"])
if self._port is None:
self._port = s.getInt(["server", "port"])
app.debug = self._debug
from octoprint.server.api import api
app.register_blueprint(api, url_prefix="/api")
boxrouterManager(
) # Makes sure the singleton is created here. It doesn't need to be stored
self._router = SockJSRouter(self._createSocketConnection, "/sockjs")
discoveryManager = DiscoveryManager()
externalDriveManager()
def access_validation_factory(validator):
"""
Creates an access validation wrapper using the supplied validator.
:param validator: the access validator to use inside the validation wrapper
:return: an access validation wrapper taking a request as parameter and performing the request validation
"""
def f(request):
"""
Creates a custom wsgi and Flask request context in order to be able to process user information
stored in the current session.
:param request: The Tornado request for which to create the environment and context
"""
wsgi_environ = tornado.wsgi.WSGIContainer.environ(request)
with app.request_context(wsgi_environ):
app.session_interface.open_session(app, request)
loginManager.reload_user()
validator(request)
return f
self._tornado_app = Application(self._router.urls + [
#(r"/downloads/timelapse/([^/]*\.mpg)", LargeResponseHandler, {"path": s.getBaseFolder("timelapse"), "as_attachment": True}),
(r"/downloads/files/local/([^/]*\.(gco|gcode))",
LargeResponseHandler, {
"path": s.getBaseFolder("uploads"),
"as_attachment": True
}),
(r"/downloads/logs/([^/]*)", LargeResponseHandler, {
"path": s.getBaseFolder("logs"),
"as_attachment": True,
"access_validation": access_validation_factory(admin_validator)
}),
#(r"/downloads/camera/current", UrlForwardHandler, {"url": s.get(["webcam", "snapshot"]), "as_attachment": True, "access_validation": access_validation_factory(user_validator)}),
(r".*", FallbackHandler, {
"fallback": WSGIContainer(app.wsgi_app)
})
])
self._server = HTTPServer(self._tornado_app,
max_buffer_size=1048576 *
s.getInt(['server', 'maxUploadSize']))
self._server.listen(self._port, address=self._host)
logger.info("Listening on http://%s:%d" % (self._host, self._port))
eventManager.fire(events.Events.STARTUP)
if s.getBoolean(["serial", "autoconnect"]):
t = threading.Thread(target=printer.connect)
t.daemon = True
t.start()
# start up watchdogs
observer = Observer()
observer.daemon = True
observer.schedule(UploadCleanupWatchdogHandler(),
s.getBaseFolder("uploads"))
observer.start()
#Load additional Tasks
additionalTasksManager()
#Load maintenance menu
maintenanceMenuManager()
try:
self._ioLoop = IOLoop.instance()
self._ioLoop.start()
except SystemExit:
pass
except:
logger.fatal(
"Please report this including the stacktrace below in AstroPrint's bugtracker. Thanks!"
)
logger.exception("Stacktrace follows:")
finally:
observer.stop()
self.cleanup()
logger.info('Cleanup complete')
observer.join(1.0)
logger.info('Good Bye!')
class Server():
def __init__(self,
configfile=None,
basedir=None,
host="127.0.0.1",
port=5000,
debug=False,
allowRoot=False,
logConf=None):
self._configfile = configfile
self._basedir = basedir
self._host = host
self._port = port
self._debug = debug
self._allowRoot = allowRoot
self._logConf = logConf
self._ioLoop = None
def stop(self):
if self._ioLoop:
self._ioLoop.stop()
self._ioLoop = None
def run(self):
if not self._allowRoot:
self._checkForRoot()
global userManager
global eventManager
global loginManager
global debug
global softwareManager
global discoveryManager
global VERSION
global UI_API_KEY
from tornado.wsgi import WSGIContainer
from tornado.httpserver import HTTPServer
from tornado.ioloop import IOLoop
from tornado.web import Application, FallbackHandler
from astroprint.printfiles.watchdogs import UploadCleanupWatchdogHandler
from astroprint.printfiles.watchdogs import EtherBoxHandler
debug = self._debug
# first initialize the settings singleton and make sure it
# uses given configfile and basedir if available
self._initSettings(self._configfile, self._basedir)
s = settings()
if not s.getBoolean(['api', 'regenerate']) and s.getString(
['api', 'key']):
UI_API_KEY = s.getString(['api', 'key'])
else:
UI_API_KEY = ''.join('%02X' % ord(z) for z in uuid.uuid4().bytes)
# then initialize logging
self._initLogging(self._debug, self._logConf)
logger = logging.getLogger(__name__)
if s.getBoolean(["accessControl", "enabled"]):
userManagerName = s.get(["accessControl", "userManager"])
try:
clazz = util.getClass(userManagerName)
userManager = clazz()
except AttributeError, e:
logger.exception(
"Could not instantiate user manager %s, will run "
"with accessControl disabled!" % userManagerName)
softwareManager = swManager()
VERSION = softwareManager.versionString
logger.info("Starting AstroBox (%s) - Commit (%s)" %
(VERSION, softwareManager.commit))
from astroprint.migration import migrateSettings
migrateSettings()
eventManager = events.eventManager()
printer = printerManager(printerProfileManager().data['driver'])
# Start some of the managers here to make sure there are
# no thread collisions
from astroprint.network.manager import networkManager
from astroprint.boxrouter import boxrouterManager
networkManager()
machine_id = s.get(["setup", "machineId"])
access_key = s.get(["setup", "accessCode"])
_set_boxid = False
if machine_id and access_key:
api = s.get(["cloudSlicer", "apiHost"])
_data = {
'boxid': machine_id,
'access_key': access_key,
}
try:
logger.info("Trying to set printer id")
logger.info(_data)
headers = {'Content-type': 'application/json'}
res = requests.post(
"%s/api/printerauth/" % api,
json=_data,
headers=headers,
timeout=10,
allow_redirects=False,
)
if res.status_code == 200:
logger.info("Printer's id is: %s", machine_id)
boxrouterManager()
boxrouterManager().boxId = machine_id
_set_boxid = True
logger.info("Done setting printer id")
else:
logger.info("Could not authenticate the printer")
logger.info("Response status code: %s", res.status_code)
except Exception as e:
logger.error(
"Error setting up boxrouter, boxid could not be set")
logger.error(e)
app.wsgi_app = ReverseProxied(app.wsgi_app)
app.secret_key = os.urandom(4096)
loginManager = LoginManager()
loginManager.session_protection = "strong"
loginManager.user_callback = load_user
if userManager is None:
loginManager.anonymous_user = users.DummyUser
principals.identity_loaders.appendleft(users.dummy_identity_loader)
loginManager.init_app(app)
# setup command triggers
events.CommandTrigger(printer)
if self._debug:
events.DebugEventListener()
if networkManager().isOnline() and _set_boxid:
softwareManager.checkForcedUpdate()
if self._host is None:
self._host = s.get(["server", "host"])
if self._port is None:
self._port = s.getInt(["server", "port"])
app.debug = self._debug
from octoprint.server.api import api
app.register_blueprint(api, url_prefix="/api")
# Makes sure the singleton is created here. It doesn't need to be stored
boxrouterManager(connect=False)
self._router = SockJSRouter(self._createSocketConnection, "/sockjs")
discoveryManager = DiscoveryManager()
def access_validation_factory(validator):
"""
Creates an access validation wrapper using the supplied validator.
:param validator: the access validator to use inside the validation
wrapper
:return: an access validation wrapper taking a request as parameter
and performing the request validation
"""
def f(request):
"""
Creates a custom wsgi and Flask request context in order to be
able to process user information stored in the current session.
:param request: The Tornado request for which to create
the environment and context
"""
wsgi_environ = tornado.wsgi.WSGIContainer.environ(request)
with app.request_context(wsgi_environ):
app.session_interface.open_session(app, request)
loginManager.reload_user()
validator(request)
return f
self._tornado_app = Application(self._router.urls + [
#(r"/downloads/timelapse/([^/]*\.mpg)",
# LargeResponseHandler,
# {"path": s.getBaseFolder("timelapse"),
# "as_attachment": True}),
(r"/downloads/files/local/([^/]*\.(gco|gcode))",
LargeResponseHandler, {
"path": s.getBaseFolder("uploads"),
"as_attachment": True
}),
(r"/downloads/logs/([^/]*)", LargeResponseHandler, {
"path": s.getBaseFolder("logs"),
"as_attachment": True,
"access_validation": access_validation_factory(admin_validator)
}),
#(r"/downloads/camera/current",
# UrlForwardHandler,
# {"url": s.get(["webcam", "snapshot"]),
# "as_attachment": True,
# "access_validation": access_validation_factory(user_validator)}),
(r".*", FallbackHandler, {
"fallback": WSGIContainer(app.wsgi_app)
})
])
self._server = HTTPServer(self._tornado_app,
max_buffer_size=1048576 *
s.getInt(['server', 'maxUploadSize']))
self._server.listen(self._port, address=self._host)
logger.info("Listening on http://%s:%d" % (self._host, self._port))
eventManager.fire(events.Events.STARTUP)
if s.getBoolean(["serial", "autoconnect"]):
(port, baudrate) = s.get(["serial", "port"
]), s.getInt(["serial", "baudrate"])
connectionOptions = printer.getConnectionOptions()
if port in connectionOptions["ports"]:
printer.connect(port, baudrate)
usbdetector = EtherBoxHandler()
# start up watchdogs
observer = Observer()
observer.schedule(UploadCleanupWatchdogHandler(),
s.getBaseFolder("uploads"))
#observer.schedule(
# usbdetector, s.get(['usb', 'folder']), recursive=True)
observer.start()
try:
self._ioLoop = IOLoop.instance()
self._ioLoop.start()
except SystemExit:
pass
except:
logger.fatal("Please report this including the stacktrace below "
"in AstroPrint's bugtracker. Thanks!")
logger.exception("Stacktrace follows:")
finally:
observer.stop()
self.cleanup()
observer.join()
logger.info('Good Bye!')
