def sampleapp():
appname = raw_input('Enter name of application : ')
session_config = SessionConfig(SessionConfig.SessionTransportMode.TLS) #default is TLS
if transport.lower() == "tipc" or transport == 2:
session_config = SessionConfig(SessionConfig.SessionTransportMode.TIPC)
session_config.ca_certs = root_cert_path
session_config.certfile = client_cert_path
session_config.keyfile = client_key_path
ne = NetworkElement(switchIP, appname)
con = ne.connect(username, password, session_config)
print 'Connected to host'
print "System Name: ", ne.properties.sys_name
print "System Uptime: ", ne.properties.sys_uptime
print "Total System Memory: ", ne.total_system_memory
print "Free System Memory: ", ne.free_system_memory
print "System CPU Utilization: ", ne.system_cpu_utilization, "%\n"
print "System Connect Time: ", ne.get_connect_time()
print "System Disonnect Time: ", ne.get_disconnect_time()
print "System __str__ Method: ", ne
print "Host Content String:\n", ne.properties.content_string
ne.disconnect()
def connect(ne_addr, ne_username, ne_password):
# check to see if ne_addr is a valid IP(v6) address
if not (HostIpCheck(ne_addr).is_ipv4() or HostIpCheck(ne_addr).is_ipv6()):
raise ValueError('%s is not a valid IP address' % ne_addr)
# TLS Connection (This is the TLS Pinning Handler)
class PinningHandler(tlspinning.TLSUnverifiedElementHandler):
def __init__(self, pinning_file):
self.pinning_file = pinning_file
def handle_verify(self, host, hashtype, finger_print, changed):
return tlspinning.DecisionType.ACCEPT_ONCE
# Connection to my onePK enabled Network Element
config = SessionConfig(None)
config.set_tls_pinning('', PinningHandler(''))
config.transportMode = SessionConfig.SessionTransportMode.TLS
network_element = NetworkElement(ne_addr)
# Try authenticating, raise error if unsuccessful
try:
network_element.connect(ne_username, ne_password, config)
except OnepConnectionException:
raise ValueError('Invalid Credentials or unable to reach %s.' %
network_element)
return network_element
def scaleNotification():
for switch in switches:
switchIP = switch[0]
appName = switch[1]
user = switch[2]
pswd = switch[3]
#
# Set up session connection configuration and connect to the switch
#
ne = NetworkElement(switchIP, appName)
if transport == 'TLS':
session_config = SessionConfig(
SessionConfig.SessionTransportMode.TLS)
session_config.ca_certs = cert
ne.connect(user, pswd, session_config)
elif transport == 'TIPC':
session_config = SessionConfig(
SessionConfig.SessionTransportMode.TIPC)
ne.connect(user, pswd, session_config)
else:
print "Please set-up a valid transport type: TIPC or TLS"
exit(0)
vty = VtyService(ne)
vty.open()
vlan_summary = vty.write("sh vlan summary")
vty.close()
vlan_sum = re.search('(?<=vlansum-all-vlan\t)(.*)', vlan_summary)
if int(vlan_sum.group(0)) > int(scale_limits["max_vlans"]):
string_print = "Vlan scale exceeded. Max vlan recommended:", scale_limits[
"max_vlans"], "vlan being used :", vlan_sum.group(0)
print string_print
ne.create_syslog_message(
ne.OnepSyslogSeverity.ONEP_SYSLOG_CRITICAL, str(string_print))
print "Disconnecting from NE: ", switchIP
ne.disconnect()
# check tranport types supported on your image by
# conf t --> onep --> transport type ?
# cert - certificate to be used for authentication in cse of TLS
# transport
# appName - OnePK application Name
# switchIP - management Switch IP address
# user - switch userID
pswd = "<pswd>"
logMsg = "syslog generated by onePK"
#####################################################################
#
# Set up session connection configuration and connect to the switch
#
ne = NetworkElement(switchIP, appName)
if transport == 'TLS':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TLS)
session_config.ca_certs = cert
ne.connect(user, pswd, session_config)
elif transport == 'TIPC':
session_config = SessionConfig(SessionConfig.SessionTransportMode.TIPC)
ne.connect(user, pswd)
else:
print "Please set-up a valid transport type: TIPC or TLS"
exit(0)
#
# Create the syslog messange and disconnect from the device
#
print "Generating Syslog message."
parser.add_option('-p',
'--password',
dest="password",
help="[Mandatory] Account Password for Login")
(options, args) = parser.parse_args()
if not options.ip:
parser.print_help()
parser.error("Provide IP Address")
if not options.userName:
parser.print_help()
parser.error("Provide UserName")
if not options.password:
options.password = getpassword("Password:")
# Setup a connection config with TLS pinning handler
config = SessionConfig(None)
config.set_tls_pinning('', PinningHandler(''))
config.transportMode = SessionConfig.SessionTransportMode.TLS
# Connection to my onePK enabled Network Element
ne = NetworkElement(options.ip, 'App_Name')
ne.connect(options.userName, options.password, config)
# Print the information of the Network Element
print ne
# Finally have the application disconnect from the Network Element
ne.disconnect()
print "You have to specify a command (-c)"
sys.exit()
if args.v:
victim = args.v
else:
print "You have to specify a victim (-u)"
sys.exit()
password = getpass.getpass("Please enter your password: "******"Prank Listener")
cliFilter = CLIFilter(command)
clientData = None
eventHandle = router.add_cli_listener(cliListener, cliFilter, clientData)
print "-----"
print router
print "-----"
print "Waiting for command: " + command
try:
print "-----"
wait_for_it = raw_input("Type a key to exit script")
router.remove_cli_listener(eventHandle)
from onep.element.SessionConfig import SessionConfig
from onep.core.util import tlspinning
from onep.interfaces import InterfaceFilter
# TLS Connection (This is the TLS Pinning Handler)
class PinningHandler(tlspinning.TLSUnverifiedElementHandler):
def __init__(self, pinning_file):
self.pinning_file = pinning_file
def handle_verify(self, host, hashtype, finger_print, changed):
return tlspinning.DecisionType.ACCEPT_ONCE
# Setup a connection config with TSL pinning handler
config = SessionConfig(None)
config.set_tls_pinning('', PinningHandler(''))
config.transportMode = SessionConfig.SessionTransportMode.TLS
# Connection to my onePK enabled Network Element
ne = NetworkElement('1.1.1.1', 'App_Name')
ne.connect('username', 'password', config)
try:
# Print the information of the Network Element
print ne
finally:
# Finally have the application disconnect from the Network Element
ne.disconnect()
