def test_specify_newton_linear_solver_in_system(self):
my_newton = NewtonSolver()
my_newton.linear_solver = DirectSolver()
prob = Problem(model=SellarDerivatives(nonlinear_solver=my_newton))
prob.setup()
self.assertIsInstance(prob.model.nonlinear_solver.linear_solver, DirectSolver)
prob.run_model()
assert_rel_error(self, prob['y1'], 25.58830273, .00001)
assert_rel_error(self, prob['y2'], 12.05848819, .00001)
def test_err_on_maxiter(self):
# Raise AnalysisError when it fails to converge
prob = Problem()
nlsolver = NewtonSolver()
prob.model = SellarDerivatives(nonlinear_solver=nlsolver, linear_solver=LinearBlockGS())
nlsolver.options['err_on_maxiter'] = True
nlsolver.options['maxiter'] = 1
prob.setup(check=False)
prob.set_solver_print(level=0)
with self.assertRaises(AnalysisError) as context:
prob.run_driver()
msg = "Solver 'NL: Newton' on system '' failed to converge."
self.assertEqual(str(context.exception), msg)
def test_sellar_derivs(self):
# Test top level Sellar (i.e., not grouped).
# Also, piggybacked testing that makes sure we only call apply_nonlinear
# on the head component behind the cycle break.
prob = Problem()
prob.model = SellarDerivatives(nonlinear_solver=NewtonSolver(), linear_solver=LinearBlockGS())
prob.setup(check=False)
prob.set_solver_print(level=0)
prob.run_model()
assert_rel_error(self, prob['y1'], 25.58830273, .00001)
assert_rel_error(self, prob['y2'], 12.05848819, .00001)
# Make sure we aren't iterating like crazy
self.assertLess(prob.model.nonlinear_solver._iter_count, 8)
def test_feature_err_on_maxiter(self):
import numpy as np
from openmdao.api import Problem, Group, IndepVarComp, NewtonSolver, LinearBlockGS, ExecComp, AnalysisError
from openmdao.test_suite.components.sellar import SellarDis1withDerivatives, SellarDis2withDerivatives
prob = Problem()
model = prob.model
model.add_subsystem('px', IndepVarComp('x', 1.0), promotes=['x'])
model.add_subsystem('pz',
IndepVarComp('z', np.array([5.0, 2.0])),
promotes=['z'])
model.add_subsystem('d1',
SellarDis1withDerivatives(),
promotes=['x', 'z', 'y1', 'y2'])
model.add_subsystem('d2',
SellarDis2withDerivatives(),
promotes=['z', 'y1', 'y2'])
model.add_subsystem('obj_cmp',
ExecComp('obj = x**2 + z[1] + y1 + exp(-y2)',
z=np.array([0.0, 0.0]),
x=0.0),
promotes=['obj', 'x', 'z', 'y1', 'y2'])
model.add_subsystem('con_cmp1',
ExecComp('con1 = 3.16 - y1'),
promotes=['con1', 'y1'])
model.add_subsystem('con_cmp2',
ExecComp('con2 = y2 - 24.0'),
promotes=['con2', 'y2'])
model.linear_solver = DirectSolver()
nlgbs = model.nonlinear_solver = NewtonSolver()
nlgbs.options['maxiter'] = 1
nlgbs.options['err_on_maxiter'] = True
prob.setup()
try:
prob.run_model()
except AnalysisError:
pass
def setup(self):
g = self.group
with g.create_group('sys') as group:
group.create_indep_var('a', val=1)
group.create_indep_var('b', val=-4)
group.create_indep_var('c', val=3)
a = g.declare_input('a')
b = g.declare_input('b')
c = g.declare_input('c')
x = g.create_implicit_output('x')
y = a * x**2 + b * x + c
x.define_residual(y)
self.linear_solver = ScipyKrylov()
self.nonlinear_solver = NewtonSolver(solve_subsystems=False)
def test_feature_vector(self):
import numpy as np
from numpy.testing import assert_almost_equal
from openmdao.api import Problem, Group, ExecComp, NewtonSolver, DirectSolver, DenseJacobian, BalanceComp
n = 100
prob = Problem(model=Group())
exec_comp = ExecComp('y=b*x+c',
b={'value': np.random.uniform(0.01,100, size=n)},
c={'value': np.random.rand(n)},
x={'value': np.zeros(n)},
y={'value': np.ones(n)})
prob.model.add_subsystem(name='exec', subsys=exec_comp)
prob.model.add_subsystem(name='balance', subsys=BalanceComp('x', val=np.ones(n)))
prob.model.connect('balance.x', 'exec.x')
prob.model.connect('exec.y', 'balance.lhs:x')
prob.model.linear_solver = DirectSolver()
prob.model.nonlinear_solver = NewtonSolver()
prob.model.nonlinear_solver.options['maxiter'] = 100
prob.model.nonlinear_solver.options['iprint'] = 0
prob.model.jacobian = DenseJacobian()
prob.setup(check=False)
prob['balance.x'] = np.random.rand(n)
prob.run_model()
b = prob['exec.b']
c = prob['exec.c']
assert_almost_equal(prob['balance.x'], -c/b, decimal=6)
print('solution')
print(prob['balance.x'])
print('expected')
print(-c/b)
def test_feature_iprint_0(self):
prob = Problem()
prob.model = SellarDerivatives()
newton = prob.model.nonlinear_solver = NewtonSolver()
scipy = prob.model.linear_solver = ScipyIterativeSolver()
newton.options['maxiter'] = 1
prob.setup(check=False)
prob['y1'] = 10000
prob['y2'] = -26
newton.options['iprint'] = 0
scipy.options['iprint'] = 0
prob.run_model()
def test_scalar(self):
n = 1
prob = Problem(model=Group())
bal = BalanceComp()
bal.add_balance('x')
tgt = IndepVarComp(name='y_tgt', val=4)
exec_comp = ExecComp('y=x**2', x={'value': 1}, y={'value': 1})
prob.model.add_subsystem(name='target', subsys=tgt, promotes_outputs=['y_tgt'])
prob.model.add_subsystem(name='exec', subsys=exec_comp)
prob.model.add_subsystem(name='balance', subsys=bal)
prob.model.connect('y_tgt', 'balance.rhs:x')
prob.model.connect('balance.x', 'exec.x')
prob.model.connect('exec.y', 'balance.lhs:x')
prob.model.linear_solver = DirectSolver()
prob.model.nonlinear_solver = NewtonSolver()
prob.model.nonlinear_solver.options['maxiter'] = 100
prob.model.nonlinear_solver.options['iprint'] = 0
prob.model.jacobian = DenseJacobian()
prob.setup()
prob['balance.x'] = np.random.rand(n)
prob.run_model()
assert_almost_equal(prob['balance.x'], 2.0, decimal=7)
np.set_printoptions(linewidth=1024)
cpd = prob.check_partials()
for (of, wrt) in cpd['balance']:
assert_almost_equal(cpd['balance'][of, wrt]['abs error'], 0.0, decimal=5)
def test_feature_post_setup_solver_configure(self):
from openmdao.api import Problem, Group, ImplicitComponent, NewtonSolver, ScipyIterativeSolver, NonlinearBlockGS
class ImplSimple(ImplicitComponent):
def setup(self):
self.add_input('a', val=1.)
self.add_output('x', val=0.)
def apply_nonlinear(self, inputs, outputs, residuals):
residuals['x'] = np.exp(outputs['x']) - \
inputs['a']**2 * outputs['x']**2
def linearize(self, inputs, outputs, jacobian):
jacobian['x', 'x'] = np.exp(outputs['x']) - \
2 * inputs['a']**2 * outputs['x']
jacobian['x', 'a'] = -2 * inputs['a'] * outputs['x']**2
class Sub(Group):
def setup(self):
self.add_subsystem('comp', ImplSimple())
# This will not solve it
self.nonlinear_solver = NonlinearBlockGS()
def configure(self):
# This will not solve it either.
self.nonlinear_solver = NonlinearBlockGS()
class Super(Group):
def setup(self):
self.add_subsystem('sub', Sub())
top = Problem()
top.model = Super()
top.setup(check=False)
# This will solve it.
top.model.sub.nonlinear_solver = NewtonSolver()
top.model.sub.linear_solver = ScipyIterativeSolver()
self.assertTrue(
isinstance(top.model.sub.nonlinear_solver, NewtonSolver))
self.assertTrue(
isinstance(top.model.sub.linear_solver, ScipyIterativeSolver))
def setUp(self):
thermo = Thermo(janaf, constants.AIR_MIX)
self.prob = Problem()
self.prob.model.add_subsystem(
'flow_start', FlowStart(thermo_data=janaf, elements=AIR_MIX))
self.prob.model.add_subsystem(
'compressor',
Compressor(map_data=AXI5,
design=False,
elements=AIR_MIX,
map_extrap=False))
self.prob.model.set_input_defaults('compressor.s_PR', val=1.)
self.prob.model.set_input_defaults('compressor.s_eff', val=1.)
self.prob.model.set_input_defaults('compressor.s_Wc', val=1.)
self.prob.model.set_input_defaults('compressor.s_Nc', val=1.)
self.prob.model.set_input_defaults('compressor.map.alphaMap', val=0.)
self.prob.model.set_input_defaults('compressor.Nmech', 0., units='rpm')
self.prob.model.set_input_defaults('flow_start.P', 17., units='psi')
self.prob.model.set_input_defaults('flow_start.T', 500., units='degR')
self.prob.model.set_input_defaults('flow_start.W', 0., units='lbm/s')
self.prob.model.set_input_defaults('compressor.area',
50.,
units='inch**2')
connect_flow(self.prob.model, "flow_start.Fl_O", "compressor.Fl_I")
newton = self.prob.model.nonlinear_solver = NewtonSolver()
newton.options['atol'] = 1e-8
newton.options['rtol'] = 1e-8
newton.options['iprint'] = 2
newton.options['maxiter'] = 10
newton.options['solve_subsystems'] = True
newton.options['max_sub_solves'] = 10
newton.linesearch = BoundsEnforceLS()
newton.linesearch.options['bound_enforcement'] = 'scalar'
newton.linesearch.options['iprint'] = -1
self.prob.model.linear_solver = DirectSolver(assemble_jac=True)
self.prob.set_solver_print(level=-1)
self.prob.setup(check=False)
def test_feature_scalar_with_default_mult(self):
from numpy.testing import assert_almost_equal
from openmdao.api import Problem, Group, IndepVarComp, ExecComp, NewtonSolver, \
DirectSolver, DenseJacobian, BalanceComp
prob = Problem(model=Group())
bal = BalanceComp()
bal.add_balance('x', use_mult=True, mult_val=2.0)
tgt = IndepVarComp(name='y_tgt', val=4)
exec_comp = ExecComp('y=x**2', x={'value': 1}, y={'value': 1})
prob.model.add_subsystem(name='target',
subsys=tgt,
promotes_outputs=['y_tgt'])
prob.model.add_subsystem(name='exec', subsys=exec_comp)
prob.model.add_subsystem(name='balance', subsys=bal)
prob.model.connect('y_tgt', 'balance.rhs:x')
prob.model.connect('balance.x', 'exec.x')
prob.model.connect('exec.y', 'balance.lhs:x')
prob.model.linear_solver = DirectSolver()
prob.model.nonlinear_solver = NewtonSolver()
prob.model.nonlinear_solver.options['maxiter'] = 100
prob.model.nonlinear_solver.options['iprint'] = 0
prob.model.jacobian = DenseJacobian()
prob.setup(check=False)
# A reasonable initial guess to find the positive root.
prob['balance.x'] = 1.0
prob.run_model()
print('x = ', prob['balance.x'])
assert_almost_equal(prob['balance.x'], np.sqrt(2), decimal=7)
def test_feature_atol(self):
import numpy as np
from openmdao.api import Problem, Group, IndepVarComp, NewtonSolver, LinearBlockGS, ExecComp
from openmdao.test_suite.components.sellar import SellarDis1withDerivatives, SellarDis2withDerivatives
prob = Problem()
model = prob.model
model.add_subsystem('px', IndepVarComp('x', 1.0), promotes=['x'])
model.add_subsystem('pz',
IndepVarComp('z', np.array([5.0, 2.0])),
promotes=['z'])
model.add_subsystem('d1',
SellarDis1withDerivatives(),
promotes=['x', 'z', 'y1', 'y2'])
model.add_subsystem('d2',
SellarDis2withDerivatives(),
promotes=['z', 'y1', 'y2'])
model.add_subsystem('obj_cmp',
ExecComp('obj = x**2 + z[1] + y1 + exp(-y2)',
z=np.array([0.0, 0.0]),
x=0.0),
promotes=['obj', 'x', 'z', 'y1', 'y2'])
model.add_subsystem('con_cmp1',
ExecComp('con1 = 3.16 - y1'),
promotes=['con1', 'y1'])
model.add_subsystem('con_cmp2',
ExecComp('con2 = y2 - 24.0'),
promotes=['con2', 'y2'])
model.linear_solver = DirectSolver()
nlgbs = model.nonlinear_solver = NewtonSolver()
nlgbs.options['atol'] = 1e-4
prob.setup()
prob.run_model()
assert_rel_error(self, prob['y1'], 25.5882856302, .00001)
assert_rel_error(self, prob['y2'], 12.05848819, .00001)
def test_scalar_with_guess_func(self):
n = 1
model = Group(assembled_jac_type='dense')
def guess_function(inputs, outputs, residuals):
outputs['x'] = np.sqrt(inputs['rhs:x'])
bal = BalanceComp(
'x', guess_func=guess_function) # test guess_func as kwarg
tgt = IndepVarComp(name='y_tgt', val=4)
exec_comp = ExecComp('y=x**2', x={'value': 1}, y={'value': 1})
model.add_subsystem(name='target',
subsys=tgt,
promotes_outputs=['y_tgt'])
model.add_subsystem(name='exec', subsys=exec_comp)
model.add_subsystem(name='balance', subsys=bal)
model.connect('y_tgt', 'balance.rhs:x')
model.connect('balance.x', 'exec.x')
model.connect('exec.y', 'balance.lhs:x')
model.linear_solver = DirectSolver(assemble_jac=True)
model.nonlinear_solver = NewtonSolver(maxiter=100, iprint=0)
prob = Problem(model)
prob.setup()
prob['balance.x'] = np.random.rand(n)
prob.run_model()
assert_almost_equal(prob['balance.x'], 2.0, decimal=7)
# should converge with no iteration due to the guess function
self.assertEqual(model.nonlinear_solver._iter_count, 1)
cpd = prob.check_partials(out_stream=None)
for (of, wrt) in cpd['balance']:
assert_almost_equal(cpd['balance'][of, wrt]['abs error'],
0.0,
decimal=5)
def test_raise_error_on_singular_with_densejac(self):
prob = Problem()
model = prob.model
comp = IndepVarComp()
comp.add_output('dXdt:TAS', val=1.0)
comp.add_output('accel_target', val=2.0)
model.add_subsystem('des_vars', comp, promotes=['*'])
teg = model.add_subsystem('thrust_equilibrium_group', subsys=Group())
teg.add_subsystem('dynamics',
ExecComp('z = 2.0*thrust'),
promotes=['*'])
thrust_bal = BalanceComp()
thrust_bal.add_balance(name='thrust',
val=1207.1,
lhs_name='dXdt:TAS',
rhs_name='accel_target',
eq_units='m/s**2',
lower=-10.0,
upper=10000.0)
teg.add_subsystem(name='thrust_bal',
subsys=thrust_bal,
promotes_inputs=['dXdt:TAS', 'accel_target'],
promotes_outputs=['thrust'])
teg.linear_solver = DirectSolver(assemble_jac=True)
teg.options['assembled_jac_type'] = 'dense'
teg.nonlinear_solver = NewtonSolver()
teg.nonlinear_solver.options['solve_subsystems'] = True
teg.nonlinear_solver.options['max_sub_solves'] = 1
teg.nonlinear_solver.options['atol'] = 1e-4
prob.setup(check=False)
prob.set_solver_print(level=0)
with self.assertRaises(RuntimeError) as cm:
prob.run_model()
expected_msg = "Singular entry found in 'thrust_equilibrium_group' for column associated with state/residual 'thrust'."
self.assertEqual(expected_msg, str(cm.exception))
def test_feature_iprint_neg1(self):
prob = Problem()
prob.model = SellarDerivatives()
newton = prob.model.nonlinear_solver = NewtonSolver()
scipy = prob.model.linear_solver = ScipyIterativeSolver()
newton.options['maxiter'] = 2
prob.setup(check=False)
# use a real bad initial guess
prob['y1'] = 10000
prob['y2'] = -26
newton.options['iprint'] = -1
scipy.options['iprint'] = -1
prob.run_model()
print('done')
def setUp(self):
p = Problem()
p.model = Group()
p.model.cite = "foobar model"
p.model.nonlinear_solver.cite = "foobar nonlinear_solver"
p.model.linear_solver.cite = "foobar linear_solver"
indeps = p.model.add_subsystem('indeps', IndepVarComp('x', 10), promotes=['*'])
indeps.linear_solver = LinearRunOnce()
ec = p.model.add_subsystem('ec', ExecComp('y = 2+3*x'), promotes=['*'])
# note using newton here makes no sense in reality, but its fine for this test since we never run the model
ec.nonlinear_solver = NewtonSolver()
ec.cite = "foobar exec comp"
self.prob = p
def define_analysis(n_int_per_seg):
"""
This function sets up the problem with all DVs and constraints necessary to perform analysis only (drives throttle residuals and BFL residuals to zero).
This does NOT ensure that the airplane has enough fuel capacity or gross weight to fly the mission.
"""
prob = Problem()
prob.model = TotalAnalysis(n_int_per_seg=n_int_per_seg)
prob.model.options['assembled_jac_type'] = 'csc'
prob.model.nonlinear_solver = NewtonSolver()
prob.model.linear_solver = DirectSolver(assemble_jac=True)
prob.model.nonlinear_solver.options['solve_subsystems'] = True
prob.model.nonlinear_solver.options['maxiter'] = 10
prob.model.nonlinear_solver.options['atol'] = 1e-6
prob.model.nonlinear_solver.options['rtol'] = 1e-6
prob.driver = ScipyOptimizeDriver()
return prob
def setup_solvers(self, phase):
"""
Add a NewtonSolver to converge continuity errors in the state between steps.
Parameters
----------
phase
The phase to which this transcription instance applies.
Returns
-------
"""
phase.nonlinear_solver = NewtonSolver()
phase.nonlinear_solver.options['iprint'] = -1
phase.nonlinear_solver.options['solve_subsystems'] = True
phase.nonlinear_solver.options['err_on_maxiter'] = True
phase.nonlinear_solver.linesearch = BoundsEnforceLS()
def test_sellar_state_connection_fd_system(self):
# Sellar model closes loop with state connection instead of a cycle.
# This test is just fd.
prob = Problem(model=SellarStateConnection(
nonlinear_solver=NewtonSolver()))
prob.model.approx_totals(method='fd')
prob.setup(check=False)
prob.set_solver_print(level=0)
prob.run_model()
assert_rel_error(self, prob['y1'], 25.58830273, .00001)
assert_rel_error(self, prob['state_eq.y2_command'], 12.05848819,
.00001)
# Make sure we aren't iterating like crazy
self.assertLess(prob.model.nonlinear_solver._iter_count, 6)
def runs_successfully(use_scal, coeffs):
prob = Problem(model=Group())
prob.model.add_subsystem('row1', ScalingTestComp(row=1, coeffs=coeffs,
use_scal=use_scal))
prob.model.add_subsystem('row2', ScalingTestComp(row=2, coeffs=coeffs,
use_scal=use_scal))
prob.model.connect('row1.y', 'row2.x')
prob.model.connect('row2.y', 'row1.x')
prob.model.nonlinear_solver = NewtonSolver(maxiter=2, atol=1e-5, rtol=0)
prob.model.nonlinear_solver.linear_solver = ScipyKrylov(maxiter=1)
prob.set_solver_print(level=0)
prob.setup(check=False)
result = prob.run_model()
success = not result[0]
return success
def test_complex_step(self):
n = 1
prob = Problem(model=Group(assembled_jac_type='dense'))
bal = BalanceComp()
bal.add_balance('x')
tgt = IndepVarComp(name='y_tgt', val=4)
exec_comp = ExecComp('y=x**2', x={'value': 1}, y={'value': 1})
prob.model.add_subsystem(name='target',
subsys=tgt,
promotes_outputs=['y_tgt'])
prob.model.add_subsystem(name='exec', subsys=exec_comp)
prob.model.add_subsystem(name='balance', subsys=bal)
prob.model.connect('y_tgt', 'balance.rhs:x')
prob.model.connect('balance.x', 'exec.x')
prob.model.connect('exec.y', 'balance.lhs:x')
prob.model.linear_solver = DirectSolver(assemble_jac=True)
prob.model.nonlinear_solver = NewtonSolver(maxiter=100, iprint=0)
prob.setup(force_alloc_complex=True)
prob['balance.x'] = np.random.rand(n)
prob.run_model()
with warnings.catch_warnings():
warnings.filterwarnings(action="error", category=np.ComplexWarning)
cpd = prob.check_partials(out_stream=None, method='cs')
for (of, wrt) in cpd['balance']:
assert_almost_equal(cpd['balance'][of, wrt]['abs error'],
0.0,
decimal=10)
def test_vectorized_with_default_mult(self):
"""
solve: 2 * x**2 = 4
expected solution: x=sqrt(2)
"""
n = 100
prob = Problem(model=Group(assembled_jac_type='dense'))
bal = BalanceComp('x', val=np.ones(n), use_mult=True, mult_val=2.0)
tgt = IndepVarComp(name='y_tgt', val=4 * np.ones(n))
exec_comp = ExecComp('y=x**2', x={'value': np.ones(n)}, y={'value': np.ones(n)})
prob.model.add_subsystem(name='target', subsys=tgt, promotes_outputs=['y_tgt'])
prob.model.add_subsystem(name='exec', subsys=exec_comp)
prob.model.add_subsystem(name='balance', subsys=bal)
prob.model.connect('y_tgt', 'balance.rhs:x')
prob.model.connect('balance.x', 'exec.x')
prob.model.connect('exec.y', 'balance.lhs:x')
prob.model.linear_solver = DirectSolver(assemble_jac=True)
prob.model.nonlinear_solver = NewtonSolver(maxiter=100, iprint=0)
prob.setup()
prob['balance.x'] = np.random.rand(n)
prob.run_model()
assert_almost_equal(prob['balance.x'], np.sqrt(2), decimal=7)
with printoptions(linewidth=1024):
cpd = prob.check_partials()
for (of, wrt) in cpd['balance']:
assert_almost_equal(cpd['balance'][of, wrt]['abs error'], 0.0, decimal=5)
def test_error_under_cs(self):
"""Verify that PETScKrylov abides by the 'maxiter' option."""
prob = Problem()
model = prob.model = Group()
model.add_subsystem('px', IndepVarComp('x', 1.0), promotes=['x'])
model.add_subsystem('pz',
IndepVarComp('z', np.array([5.0, 2.0])),
promotes=['z'])
model.add_subsystem('d1',
SellarDis1withDerivatives(),
promotes=['x', 'z', 'y1', 'y2'])
model.add_subsystem('d2',
SellarDis2withDerivatives(),
promotes=['z', 'y1', 'y2'])
model.add_subsystem('obj_cmp',
ExecComp('obj = x**2 + z[1] + y1 + exp(-y2)',
z=np.array([0.0, 0.0]),
x=0.0),
promotes=['obj', 'x', 'z', 'y1', 'y2'])
model.add_subsystem('con_cmp1',
ExecComp('con1 = 3.16 - y1'),
promotes=['con1', 'y1'])
model.add_subsystem('con_cmp2',
ExecComp('con2 = y2 - 24.0'),
promotes=['con2', 'y2'])
model.nonlinear_solver = NewtonSolver()
model.linear_solver = PETScKrylov()
model.approx_totals(method='cs')
prob.setup(mode='fwd')
prob.set_solver_print(level=0)
prob.run_model()
with self.assertRaises(RuntimeError) as cm:
J = prob.compute_totals(of=['obj'], wrt=['z'])
msg = 'PETScKrylov solver is not supported under complex step.'
self.assertEqual(str(cm.exception), msg)
def test_post_setup_solver_configure(self):
# Test that we can change solver settings after we have instantiated our model.
class ImplSimple(ImplicitComponent):
def setup(self):
self.add_input('a', val=1.)
self.add_output('x', val=0.)
def apply_nonlinear(self, inputs, outputs, residuals):
residuals['x'] = np.exp(outputs['x']) - \
inputs['a']**2 * outputs['x']**2
def linearize(self, inputs, outputs, jacobian):
jacobian['x', 'x'] = np.exp(outputs['x']) - \
2 * inputs['a']**2 * outputs['x']
jacobian['x', 'a'] = -2 * inputs['a'] * outputs['x']**2
class Sub(Group):
def setup(self):
self.add_subsystem('comp', ImplSimple())
# This solver will get over-ridden below
self.nonlinear_solver = NonlinearBlockGS()
def configure(self):
# This solver will get over-ridden below
self.nonlinear_solver = NonlinearBlockGS()
class Super(Group):
def setup(self):
self.add_subsystem('sub', Sub())
top = Problem()
top.model = Super()
top.setup(check=False)
# These solvers override the ones set in the setup method of the 'sub' groups
top.model.sub.nonlinear_solver = NewtonSolver()
top.model.sub.linear_solver = ScipyKrylov()
self.assertTrue(
isinstance(top.model.sub.nonlinear_solver, NewtonSolver))
self.assertTrue(isinstance(top.model.sub.linear_solver, ScipyKrylov))
def test_derivs(self):
n = 1
p = Problem(model=Group())
ivc = IndepVarComp()
ivc.add_output('gap', val=.001, units='m')
ivc.add_output('w_slot', val=.01508251, units='m')
ivc.add_output('w_t', val=.0047909798, units='m')
ivc.add_output('t_mag', val=.0044, units='m')
ivc.add_output('Br_20', val=1.39, units='T')
ivc.add_output('T_coef_rem_mag', val=.00393)
ivc.add_output('T_mag', val=100, units='C')
ivc.add_output('k_sat', val=1)
ivc.add_output('mu_r', val=1, units='H/m')
ivc.add_output('n_m', val=20)
ivc.add_output('n_turns', val=12)
ivc.add_output('I', val=34.35, units='A')
ivc.add_output('rot_or', val=.06841554332, units='m')
ivc.add_output('P_shaft', val=14.0, units='kW')
ivc.add_output('rpm', val=2000, units='rpm')
ivc.add_output('stack_length', val=.0345, units='m')
ivc.add_output('P_wire', val=396, units='W')
ivc.add_output('P_steinmetz', val=260, units='W')
p.model.add_subsystem('ivc', ivc, promotes_outputs=['*'])
p.model.add_subsystem(name='em', subsys=EmGroup(num_nodes=n))
p.model.connect('P_shaft', 'em.P_shaft')
p.model.connect('P_wire', 'em.P_wire')
p.model.connect('P_steinmetz', 'em.P_steinmetz')
p.model.linear_solver = DirectSolver()
p.model.nonlinear_solver = NewtonSolver()
p.setup(force_alloc_complex=True)
p['P_shaft'] = 10
p.run_model()
data = p.check_partials(method='cs',
compact_print=True,
show_only_incorrect=True)
assert_check_partials(data, atol=1e-6, rtol=1e-6)
def test_scalar(self):
n = 1
prob = Problem(model=Group(assembled_jac_type='dense'))
bal = BalanceComp()
bal.add_balance('x')
tgt = IndepVarComp(name='y_tgt', val=4)
exec_comp = ExecComp('y=x**2', x={'value': 1}, y={'value': 1})
prob.model.add_subsystem(name='target',
subsys=tgt,
promotes_outputs=['y_tgt'])
prob.model.add_subsystem(name='exec', subsys=exec_comp)
prob.model.add_subsystem(name='balance', subsys=bal)
prob.model.connect('y_tgt', 'balance.rhs:x')
prob.model.connect('balance.x', 'exec.x')
prob.model.connect('exec.y', 'balance.lhs:x')
prob.model.linear_solver = DirectSolver(assemble_jac=True)
prob.model.nonlinear_solver = NewtonSolver(maxiter=100, iprint=0)
prob.setup()
prob['balance.x'] = np.random.rand(n)
prob.run_model()
assert_almost_equal(prob['balance.x'], 2.0, decimal=7)
cpd = prob.check_partials(out_stream=None)
for (of, wrt) in cpd['balance']:
assert_almost_equal(cpd['balance'][of, wrt]['abs error'],
0.0,
decimal=5)
def test_guess_nonlinear_transfer_subbed2(self):
# Test that data is transfered to a component before calling guess_nonlinear.
class ImpWithInitial(ImplicitComponent):
def setup(self):
self.add_input('x', 3.0)
self.add_output('y', 4.0)
def solve_nonlinear(self, inputs, outputs):
""" Do nothing. """
pass
def apply_nonlinear(self, inputs, outputs, resids):
""" Do nothing. """
resids['y'] = 1.0e-6
pass
def guess_nonlinear(self, inputs, outputs, resids):
# Passthrough
outputs['y'] = inputs['x']
group = Group()
sub = Group()
group.add_subsystem('px', IndepVarComp('x', 77.0))
sub.add_subsystem('comp1', ImpWithInitial())
sub.add_subsystem('comp2', ImpWithInitial())
group.connect('px.x', 'sub.comp1.x')
group.connect('sub.comp1.y', 'sub.comp2.x')
group.add_subsystem('sub', sub)
sub.nonlinear_solver = NewtonSolver()
sub.nonlinear_solver.options['maxiter'] = 1
prob = Problem(model=group)
prob.set_solver_print(level=0)
prob.setup(check=False)
prob.run_model()
assert_rel_error(self, prob['sub.comp2.y'], 77., 1e-5)
def test_feature_scalar(self):
from numpy.testing import assert_almost_equal
from openmdao.api import Problem, Group, IndepVarComp, ExecComp, NewtonSolver, \
DirectSolver, BalanceComp
prob = Problem(model=Group(assembled_jac_type='dense'))
bal = BalanceComp()
bal.add_balance('x', use_mult=True)
tgt = IndepVarComp(name='y_tgt', val=4)
mult_ivc = IndepVarComp(name='mult', val=2.0)
exec_comp = ExecComp('y=x**2', x={'value': 1}, y={'value': 1})
prob.model.add_subsystem(name='target', subsys=tgt, promotes_outputs=['y_tgt'])
prob.model.add_subsystem(name='mult_comp', subsys=mult_ivc, promotes_outputs=['mult'])
prob.model.add_subsystem(name='exec', subsys=exec_comp)
prob.model.add_subsystem(name='balance', subsys=bal)
prob.model.connect('y_tgt', 'balance.rhs:x')
prob.model.connect('mult', 'balance.mult:x')
prob.model.connect('balance.x', 'exec.x')
prob.model.connect('exec.y', 'balance.lhs:x')
prob.model.linear_solver = DirectSolver(assemble_jac=True)
prob.model.nonlinear_solver = NewtonSolver(maxiter=100, iprint=0)
prob.setup(check=False)
# A reasonable initial guess to find the positive root.
prob['balance.x'] = 1.0
prob.run_model()
print('x = ', prob['balance.x'])
assert_almost_equal(prob['balance.x'], np.sqrt(2), decimal=7)
def test_simple_implicit_apply(self):
prob = Problem(Group())
prob.model.add_subsystem('p1', IndepVarComp('x', 0.5))
prob.model.add_subsystem('comp', SimpleImplicitCompApply())
prob.model.linear_solver = ScipyGMRES()
prob.model.nonlinear_solver = NewtonSolver()
prob.set_solver_print(level=0)
prob.model.connect('p1.x', 'comp.x')
prob.setup(check=False, mode='fwd')
prob.run_model()
assert_rel_error(self, prob['comp.z'], 2.666, 1e-3)
self.assertLess(prob.model.nonlinear_solver._iter_count, 5)
J = prob.compute_totals(of=['comp.y', 'comp.z'], wrt=['p1.x'])
assert_rel_error(self, J[('comp.y', 'p1.x')][0][0], -2.5555511, 1e-5)
assert_rel_error(self, J[('comp.z', 'p1.x')][0][0], -1.77777777, 1e-5)
prob.setup(check=False, mode='rev')
prob.run_model()
assert_rel_error(self, prob['comp.z'], 2.666, 1e-3)
self.assertLess(prob.model.nonlinear_solver._iter_count, 5)
J = prob.compute_totals(of=['comp.y', 'comp.z'], wrt=['p1.x'])
assert_rel_error(self, J[('comp.y', 'p1.x')][0][0], -2.5555511, 1e-5)
assert_rel_error(self, J[('comp.z', 'p1.x')][0][0], -1.77777777, 1e-5)
# Check partials
data = prob.check_partials()
for key1, val1 in iteritems(data):
for key2, val2 in iteritems(val1):
assert_rel_error(self, val2['abs error'][0], 0.0, 1e-5)
assert_rel_error(self, val2['abs error'][1], 0.0, 1e-5)
assert_rel_error(self, val2['abs error'][2], 0.0, 1e-5)
assert_rel_error(self, val2['rel error'][0], 0.0, 1e-5)
assert_rel_error(self, val2['rel error'][1], 0.0, 1e-5)
assert_rel_error(self, val2['rel error'][2], 0.0, 1e-5)
def test_specify_precon_left(self):
prob = Problem()
model = prob.model = Group()
model.add_subsystem('px', IndepVarComp('x', 1.0), promotes=['x'])
model.add_subsystem('pz',
IndepVarComp('z', np.array([5.0, 2.0])),
promotes=['z'])
model.add_subsystem('d1',
SellarDis1withDerivatives(),
promotes=['x', 'z', 'y1', 'y2'])
model.add_subsystem('d2',
SellarDis2withDerivatives(),
promotes=['z', 'y1', 'y2'])
model.add_subsystem('obj_cmp',
ExecComp('obj = x**2 + z[1] + y1 + exp(-y2)',
z=np.array([0.0, 0.0]),
x=0.0),
promotes=['obj', 'x', 'z', 'y1', 'y2'])
model.add_subsystem('con_cmp1',
ExecComp('con1 = 3.16 - y1'),
promotes=['con1', 'y1'])
model.add_subsystem('con_cmp2',
ExecComp('con2 = y2 - 24.0'),
promotes=['con2', 'y2'])
model.nonlinear_solver = NewtonSolver()
model.linear_solver = PetscKSP()
model.linear_solver.precon = DirectSolver()
model.linear_solver.options['precon_side'] = 'left'
model.linear_solver.options['ksp_type'] = 'richardson'
prob.setup()
prob.run_model()
assert_rel_error(self, prob['y1'], 25.58830273, .00001)
assert_rel_error(self, prob['y2'], 12.05848819, .00001)
def test_jacobian_changed_group(self):
prob = Problem()
model = prob.model = Group()
model.add_subsystem('px', IndepVarComp('x', 1.0), promotes=['x'])
model.add_subsystem('pz',
IndepVarComp('z', np.array([5.0, 2.0])),
promotes=['z'])
model.add_subsystem('d1',
SellarDis1withDerivatives(),
promotes=['x', 'z', 'y1', 'y2'])
model.add_subsystem('d2',
SellarDis2withDerivatives(),
promotes=['z', 'y1', 'y2'])
model.add_subsystem('obj_cmp',
ExecComp('obj = x**2 + z[1] + y1 + exp(-y2)',
z=np.array([0.0, 0.0]),
x=0.0),
promotes=['obj', 'x', 'z', 'y1', 'y2'])
model.add_subsystem('con_cmp1',
ExecComp('con1 = 3.16 - y1'),
promotes=['con1', 'y1'])
model.add_subsystem('con_cmp2',
ExecComp('con2 = y2 - 24.0'),
promotes=['con2', 'y2'])
model.nonlinear_solver = NewtonSolver()
model.linear_solver = ScipyKrylov()
prob.model.jacobian = DenseJacobian()
prob.setup(check=False)
prob.final_setup()
prob.model.jacobian = DenseJacobian()
msg = ": jacobian has changed and setup was not called."
with assertRaisesRegex(self, Exception, msg):
prob.run_model()
def test_component_assembled_jac(self):
prob = Problem()
model = prob.model = Group()
model.add_subsystem('px', IndepVarComp('x', 1.0), promotes=['x'])
model.add_subsystem('pz',
IndepVarComp('z', np.array([5.0, 2.0])),
promotes=['z'])
model.add_subsystem('d1',
SellarDis1withDerivatives(),
promotes=['x', 'z', 'y1', 'y2'])
model.add_subsystem('d2',
SellarDis2withDerivatives(),
promotes=['z', 'y1', 'y2'])
model.add_subsystem('obj_cmp',
ExecComp('obj = x**2 + z[1] + y1 + exp(-y2)',
z=np.array([0.0, 0.0]),
x=0.0),
promotes=['obj', 'x', 'z', 'y1', 'y2'])
model.add_subsystem('con_cmp1',
ExecComp('con1 = 3.16 - y1'),
promotes=['con1', 'y1'])
model.add_subsystem('con_cmp2',
ExecComp('con2 = y2 - 24.0'),
promotes=['con2', 'y2'])
model.nonlinear_solver = NewtonSolver()
model.linear_solver = ScipyKrylov()
d1 = prob.model.d1
d1.jacobian = DenseJacobian()
prob.set_solver_print(level=0)
prob.setup(check=False)
prob.run_model()
assert_rel_error(self, prob['y1'], 25.58830273, .00001)
assert_rel_error(self, prob['y2'], 12.05848819, .00001)