def test_read3(self):
# Parse a single group in a deck with non-unique group names
namelist1 = "Testing\n" + \
"$GROUP\n" + \
" intvar = 99\n" + \
"$END\n" + \
"$GROUP\n" + \
" floatvar = 3.5e-23\n" + \
"$END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model(single_group=1)
# Unchanged
self.assertEqual(my_comp.intvar, 333)
# Changed
self.assertEqual(my_comp.floatvar, 3.5e-23)
def test_read3(self):
# Parse a single group in a deck with non-unique group names
namelist1 = "Testing\n" + \
"$GROUP\n" + \
" intvar = 99\n" + \
"$END\n" + \
"$GROUP\n" + \
" floatvar = 3.5e-23\n" + \
"$END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model(single_group=1)
# Unchanged
self.assertEqual(my_comp.intvar, 333)
# Changed
self.assertEqual(my_comp.floatvar, 3.5e-23)
def test_2Darray_read(self):
namelist1 = "Testing\n" + \
"$GROUP\n" + \
" arrayvartwod(1,1) = 12, 24, 36\n" + \
" arrayvartwod(1,2) = 33, 66, 99\n" + \
"$END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
top = Problem()
top.root = Group()
top.root.add('my_comp', VarComponent())
top.setup(check=False)
top.run()
sb = Namelist(top.root.my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
# Unchanged
self.assertEqual(top['my_comp.arrayvartwod'][0][0], 12)
self.assertEqual(top['my_comp.arrayvartwod'][1][2], 99)
def test_read3(self):
# Parse a single group in a deck with non-unique group names
namelist1 = "Testing\n" + \
"$GROUP\n" + \
" intvar = 99\n" + \
"$END\n" + \
"$GROUP\n" + \
" floatvar = 3.5e-23\n" + \
"$END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
top = Problem()
top.root = Group()
top.root.add('my_comp', VarComponent())
top.setup(check=False)
top.run()
sb = Namelist(top.root.my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model(single_group=1)
# Unchanged
self.assertEqual(top['my_comp.intvar'], 333)
# Changed
self.assertEqual(top['my_comp.floatvar'], 3.5e-23)
def test_read4(self):
# Variables on same line as header
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION boolvar = T, arrayvar = 3.5, 7.76, 1.23\n" + \
"/\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
top = Problem()
top.root = Group()
top.root.add('my_comp', VarComponent())
top.setup(check=False)
top.run()
sb = Namelist(top.root.my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(top['my_comp.boolvar'], True)
self.assertEqual(top['my_comp.arrayvar'][0], 3.5)
namelist1 = "Testing\n" + \
" \n" + \
"$OPTION boolvar = T, arrayvar = 3.5, 7.76, 1.23, $END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
top = Problem()
top.root = Group()
top.root.add('my_comp', VarComponent())
top.setup(check=False)
top.run()
sb = Namelist(top.root.my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(top['my_comp.boolvar'], True)
self.assertEqual(top['my_comp.arrayvar'][0], 3.5)
def test_read2(self):
# Put variables in container, using rules_dict
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION\n" + \
" This is a comment\n" + \
" intvar = 777\n" + \
" boolvar = .FALSE.\n" + \
" floatvar = -3.14\n" + \
" extravar = 555\n" + \
" TEXTVAR = 'That'\n" + \
" ! This is a comment too\n" + \
"/\n" + \
"&NODICT\n" + \
" noval = 0\n" + \
"/\n" + \
"&DUPE\n" + \
" some = 0\n" + \
"/\n" + \
"&DUPE\n" + \
" some = 0\n" + \
"/\n" + \
"FREEFORM\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
top = Problem()
top.root = Group()
top.root.add('my_comp', VarComponent())
top.setup(check=False)
top.run()
sb = Namelist(top.root.my_comp)
sb.set_filename(self.filename)
sb.parse_file()
rules_dict = { "OPTION" : ["varcontainer"] }
n1, n2, n3 = sb.load_model(rules_dict)
self.assertEqual(n1[4], 'FREEFORM')
self.assertEqual(n2[1], 'NODICT')
self.assertEqual(n2[2], 'DUPE')
self.assertEqual(n2[3], 'DUPE')
self.assertEqual(n3, ['extravar'])
self.assertEqual(top['my_comp.varcontainer:intvar'], 777)
self.assertEqual(top['my_comp.varcontainer:boolvar'], False)
self.assertEqual(top['my_comp.varcontainer:floatvar'], -3.14)
self.assertEqual(top['my_comp.varcontainer:textvar'], 'That')
def test_read2(self):
# Put variables in container, using rules_dict
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION\n" + \
" This is a comment\n" + \
" intvar = 777\n" + \
" boolvar = .FALSE.\n" + \
" floatvar = -3.14\n" + \
" extravar = 555\n" + \
" TEXTVAR = 'That'\n" + \
" ! This is a comment too\n" + \
" listenumvar = 3,3,2,2\n" + \
"/\n" + \
"&NODICT\n" + \
" noval = 0\n" + \
"/\n" + \
"&DUPE\n" + \
" some = 0\n" + \
"/\n" + \
"&DUPE\n" + \
" some = 0\n" + \
"/\n" + \
"FREEFORM\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
rules_dict = { "OPTION" : ["varcontainer"] }
n1, n2, n3 = sb.load_model(rules_dict)
self.assertEqual(n1[4], 'FREEFORM')
self.assertEqual(n2[1], 'NODICT')
self.assertEqual(n2[2], 'DUPE')
self.assertEqual(n2[3], 'DUPE')
self.assertEqual(n3, ['extravar'])
self.assertEqual(my_comp.varcontainer.intvar, 777)
self.assertEqual(my_comp.varcontainer.boolvar, False)
self.assertEqual(my_comp.varcontainer.floatvar, -3.14)
self.assertEqual(my_comp.varcontainer.textvar, 'That')
self.assertEqual(my_comp.varcontainer.listenumvar, [3, 3, 2, 2])
def test_read2(self):
# Put variables in container, using rules_dict
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION\n" + \
" This is a comment\n" + \
" intvar = 777\n" + \
" boolvar = .FALSE.\n" + \
" floatvar = -3.14\n" + \
" extravar = 555\n" + \
" TEXTVAR = 'That'\n" + \
" ! This is a comment too\n" + \
" listenumvar = 3,3,2,2\n" + \
"/\n" + \
"&NODICT\n" + \
" noval = 0\n" + \
"/\n" + \
"&DUPE\n" + \
" some = 0\n" + \
"/\n" + \
"&DUPE\n" + \
" some = 0\n" + \
"/\n" + \
"FREEFORM\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
rules_dict = {"OPTION": ["varcontainer"]}
n1, n2, n3 = sb.load_model(rules_dict)
self.assertEqual(n1[4], 'FREEFORM')
self.assertEqual(n2[1], 'NODICT')
self.assertEqual(n2[2], 'DUPE')
self.assertEqual(n2[3], 'DUPE')
self.assertEqual(n3, ['extravar'])
self.assertEqual(my_comp.varcontainer.intvar, 777)
self.assertEqual(my_comp.varcontainer.boolvar, False)
self.assertEqual(my_comp.varcontainer.floatvar, -3.14)
self.assertEqual(my_comp.varcontainer.textvar, 'That')
self.assertEqual(my_comp.varcontainer.listenumvar, [3, 3, 2, 2])
def test_read4(self):
# Variables on same line as header
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION boolvar = T, arrayvar = 3.5, 7.76, 1.23\n" + \
"/\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(my_comp.boolvar, True)
self.assertEqual(my_comp.arrayvar[0], 3.5)
namelist1 = "Testing\n" + \
" \n" + \
"$OPTION boolvar = T, arrayvar = 3.5, 7.76, 1.23, $END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(my_comp.boolvar, True)
self.assertEqual(my_comp.arrayvar[0], 3.5)
def test_read4(self):
# Variables on same line as header
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION boolvar = T, arrayvar = 3.5, 7.76, 1.23\n" + \
"/\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(my_comp.boolvar, True)
self.assertEqual(my_comp.arrayvar[0], 3.5)
namelist1 = "Testing\n" + \
" \n" + \
"$OPTION boolvar = T, arrayvar = 3.5, 7.76, 1.23, $END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(my_comp.boolvar, True)
self.assertEqual(my_comp.arrayvar[0], 3.5)
def test_2Darray_read(self):
namelist1 = "Testing\n" + \
"$GROUP\n" + \
" arrayvartwod(1,1) = 12, 24, 36\n" + \
" arrayvartwod(1,2) = 33, 66, 99\n" + \
"$END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
# Unchanged
self.assertEqual(my_comp.arrayvartwod[0][0], 12)
self.assertEqual(my_comp.arrayvartwod[1][2], 99)
def test_2Darray_read(self):
namelist1 = "Testing\n" + \
"$GROUP\n" + \
" arrayvartwod(1,1) = 12, 24, 36\n" + \
" arrayvartwod(1,2) = 33, 66, 99\n" + \
"$END\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
# Unchanged
self.assertEqual(my_comp.arrayvartwod[0][0], 12)
self.assertEqual(my_comp.arrayvartwod[1][2], 99)
def load_model(self):
ct = Namelist(self)
ct.set_filename('control.in')
ct.parse_file()
ct.load_model()
fc = Namelist(self)
fc.set_filename('flocond.in')
fc.parse_file()
fc.load_model()
ep = Namelist(self)
ep.set_filename('expnd.in')
ep.parse_file()
ep.load_model()
zr = Namelist(self)
zr.set_filename('zrdmix.in')
zr.parse_file()
zr.load_model()
def load_model(self):
ct = Namelist(self)
ct.set_filename('control.in')
ct.parse_file()
ct.load_model()
fc = Namelist(self)
fc.set_filename('flocond.in')
fc.parse_file()
fc.load_model()
ep = Namelist(self)
ep.set_filename('expnd.in')
ep.parse_file()
ep.load_model()
zr = Namelist(self)
zr.set_filename('zrdmix.in')
zr.parse_file()
zr.load_model()
def test_read1(self):
# Put variables in top container, so no rules_dict
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION\n" + \
" This is a comment\n" + \
" INTVAR = 777, single(1) = 15.0, floatvar = -3.14\n" + \
" singleint(2) = 3,4,5\n" + \
" stringarray(3) = 'xyz'\n" + \
" boolvar = T\n" + \
" textvar = 'That'\n" + \
" ! This is a comment too\n" + \
" listenumvar = 3,3,2,2\n" + \
" listenumvar2 = 1.5\n" + \
" arrayvar = 3.5, 7.76, 1.23\n" + \
" arrayvarsplit = 3.5, 7.76\n" + \
" 5.45, 22.0\n" + \
" 1.23\n" + \
" arrayvarsplit2 = 1\n" + \
" 2\n" + \
" 3\n" + \
" arraysmall = 1.75\n" + \
" arrayshorthand = 3.456*8\n" + \
" expvar1 = 1.5e-12\n" + \
" expvar2 = -1.5D12\n" + \
"/\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(sb.title, 'Testing')
self.assertEqual(my_comp.intvar, 777)
self.assertEqual(my_comp.boolvar, True)
self.assertEqual(my_comp.floatvar, -3.14)
self.assertEqual(my_comp.expvar1, 1.5e-12)
self.assertEqual(my_comp.expvar2, -1.5e12)
self.assertEqual(my_comp.textvar, 'That')
self.assertEqual(my_comp.listenumvar, [3, 3, 2, 2])
self.assertEqual(my_comp.listenumvar2, [1.5])
self.assertEqual(my_comp.arrayvar[0], 3.5)
self.assertEqual(my_comp.arrayvar[1], 7.76)
self.assertEqual(my_comp.arrayvar[2], 1.23)
self.assertEqual(my_comp.arrayvarsplit[0], 3.5)
self.assertEqual(my_comp.arrayvarsplit[1], 7.76)
self.assertEqual(my_comp.arrayvarsplit[2], 5.45)
self.assertEqual(my_comp.arrayvarsplit[3], 22.0)
self.assertEqual(my_comp.arrayvarsplit[4], 1.23)
self.assertEqual(my_comp.arrayvarsplit2[0], 1)
self.assertEqual(my_comp.arrayvarsplit2[1], 2)
self.assertEqual(my_comp.arrayvarsplit2[2], 3)
self.assertEqual(my_comp.arraysmall[0], 1.75)
self.assertEqual(len(my_comp.arraysmall), 1)
self.assertEqual(my_comp.arrayshorthand[4], 3.456)
self.assertEqual(len(my_comp.arrayshorthand), 8)
self.assertEqual(my_comp.single[0], 15.0)
self.assertEqual(my_comp.singleint[3], 5)
self.assertEqual(my_comp.stringarray[2], 'xyz')
self.assertEqual(type(my_comp.singleint[2]), numpy_int32)
# Test out reading a single card by name
self.assertEqual(sb.find_card('OPTION', 'floatvar'), -3.14)
def load_model(self, control_input='control.in',
flocond_input='flocond.in',
expnd_input='expnd.in',
zrdmix_input='zrdmix.in',
hwall_input='hwall.in'):
'''Reads in an existing set of input files and populates the model.'''
ignore = ['ist', 'ifab']
ct = Namelist(self)
ct.set_filename(control_input)
ct.parse_file()
ct.load_model(ignore=ignore)
ignore = ['p01d', 'p02d', 't01d', 't02d', 'rm1', 'rm2', 'gam', 'pinf',
'a1d', 'a2d', 'a3d']
fc = Namelist(self)
fc.set_filename(flocond_input)
fc.parse_file()
fc.load_model(ignore=ignore)
self.flow_in.pri.Pt = fc.find_card('floc', 'p01d')
self.flow_in.sec.Pt = fc.find_card('floc', 'p02d')
self.flow_in.pri.Tt = fc.find_card('floc', 't01d')
self.flow_in.sec.Tt = fc.find_card('floc', 't02d')
self.flow_in.pri.Mach = fc.find_card('floc', 'rm1')
self.flow_in.sec.Mach = fc.find_card('floc', 'rm2')
self.flow_in.gamma = fc.find_card('floc', 'gam')
self.flow_in.Pstatic = fc.find_card('floc', 'pinf')
a1d = fc.find_card('floc', 'a1d')
a2d = fc.find_card('floc', 'a2d')
a3d = fc.find_card('floc', 'a3d')
ep = Namelist(self)
ep.set_filename(expnd_input)
ep.parse_file()
ep.load_model()
ignore = ['RLD', 'H0LM', 'H0HY', 'ALP1', 'ALP2', 'BWID']
zr = Namelist(self)
zr.set_filename(zrdmix_input)
zr.parse_file()
zr.load_model(ignore=ignore)
self.geo_in.length = zr.find_card('zrd', 'RLD')
self.geo_in.LhWave = zr.find_card('zrd', 'H0LM')
self.geo_in.LhMh = zr.find_card('zrd', 'H0HY')
self.geo_in.ChuteAngles = zr.find_card('zrd', 'ALP1')
#self.geo_in.ChuteAngles = zr.find_card('zrd', 'ALP2')
BWID = zr.find_card('zrd', 'BWID')
parser = FileParser()
parser.set_file(hwall_input)
parser.set_delimiters(", ")
nrow = parser.transfer_var(0, 1)
geom = zeros((nrow, 2), 'd')
for index in range(nrow):
geom[index, :] = parser.transfer_array(1+index, 1, 1+index, 2)
self.geom = geom
# Reverse area calculations for AsAp, AeAt and AR
# Note that DREA only uses half the area as it assumes a plane of symmetry
self.geo_in.Apri = 2.0*a1d
self.geo_in.AsAp = 2.0*a2d/self.geo_in.Apri
self.geo_in.Asec = self.geo_in.AsAp*self.geo_in.Apri
self.geo_in.AeAt = 2.0*a3d/(self.geo_in.Apri+self.geo_in.Asec)
self.geo_in.AR = BWID*BWID/(self.geo_in.Apri+self.geo_in.Asec)
#self.geo_in.length = self.geom[-1, 0]
self.geo_in.width = 0.5*(self.geo_in.Apri + self.geo_in.Asec)/self.geom[0,1]
self.geo_in.Aexit = 2.0*self.geom[-1,1]*self.geo_in.width
def test_read1(self):
# Put variables in top container, so no rules_dict
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION\n" + \
" This is a comment\n" + \
" INTVAR = 777, single(1) = 15.0, floatvar = -3.14\n" + \
" singleint(2) = 3,4,5\n" + \
" stringarray(3) = 'xyz'\n" + \
" boolvar = T\n" + \
" textvar = 'That'\n" + \
" ! This is a comment too\n" + \
" listenumvar = 3,3,2,2\n" + \
" listenumvar2 = 1.5\n" + \
" arrayvar = 3.5, 7.76, 1.23\n" + \
" arrayvarsplit = 3.5, 7.76\n" + \
" 5.45, 22.0\n" + \
" 1.23\n" + \
" arrayvarsplit2 = 1\n" + \
" 2\n" + \
" 3\n" + \
" arraysmall = 1.75\n" + \
" arrayshorthand = 3.456*8\n" + \
" expvar1 = 1.5e-12\n" + \
" expvar2 = -1.5D12\n" + \
"/\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
my_comp = VarComponent()
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(sb.title, 'Testing')
self.assertEqual(my_comp.intvar, 777)
self.assertEqual(my_comp.boolvar, True)
self.assertEqual(my_comp.floatvar, -3.14)
self.assertEqual(my_comp.expvar1, 1.5e-12)
self.assertEqual(my_comp.expvar2, -1.5e12)
self.assertEqual(my_comp.textvar, 'That')
self.assertEqual(my_comp.listenumvar, [3, 3, 2, 2])
self.assertEqual(my_comp.listenumvar2, [1.5])
self.assertEqual(my_comp.arrayvar[0], 3.5)
self.assertEqual(my_comp.arrayvar[1], 7.76)
self.assertEqual(my_comp.arrayvar[2], 1.23)
self.assertEqual(my_comp.arrayvarsplit[0], 3.5)
self.assertEqual(my_comp.arrayvarsplit[1], 7.76)
self.assertEqual(my_comp.arrayvarsplit[2], 5.45)
self.assertEqual(my_comp.arrayvarsplit[3], 22.0)
self.assertEqual(my_comp.arrayvarsplit[4], 1.23)
self.assertEqual(my_comp.arrayvarsplit2[0], 1)
self.assertEqual(my_comp.arrayvarsplit2[1], 2)
self.assertEqual(my_comp.arrayvarsplit2[2], 3)
self.assertEqual(my_comp.arraysmall[0], 1.75)
self.assertEqual(len(my_comp.arraysmall), 1)
self.assertEqual(my_comp.arrayshorthand[4], 3.456)
self.assertEqual(len(my_comp.arrayshorthand), 8)
self.assertEqual(my_comp.single[0], 15.0)
self.assertEqual(my_comp.singleint[3], 5)
self.assertEqual(my_comp.stringarray[2], 'xyz')
self.assertEqual(type(my_comp.singleint[2]), numpy_int32)
# Test out reading a single card by name
self.assertEqual(sb.find_card('OPTION', 'floatvar'), -3.14)
def test_read_pre_setup(self):
# Put variables in top container, so no rules_dict
namelist1 = "Testing\n" + \
" \n" + \
"&OPTION\n" + \
" This is a comment\n" + \
" INTVAR = 777, single(1) = 15.0, floatvar = -3.14\n" + \
" singleint(2) = 3,4,5\n" + \
" stringarray(3) = 'xyz'\n" + \
" boolvar = T\n" + \
" textvar = 'That'\n" + \
" ! This is a comment too\n" + \
" arrayvar = 3.5, 7.76, 1.23\n" + \
" arrayvarsplit = 3.5, 7.76\n" + \
" 5.45, 22.0\n" + \
" 1.23\n" + \
" arrayvarsplit2 = 1\n" + \
" 2\n" + \
" 3\n" + \
" arraysmall = 1.75\n" + \
" arrayshorthand = 3.456*8\n" + \
" expvar1 = 1.5e-12\n" + \
" expvar2 = -1.5D12\n" + \
"/\n"
outfile = open(self.filename, 'w')
outfile.write(namelist1)
outfile.close()
top = Problem()
top.root = Group()
my_comp = top.root.add('my_comp', VarComponent())
sb = Namelist(my_comp)
sb.set_filename(self.filename)
sb.parse_file()
sb.load_model()
self.assertEqual(sb.title, 'Testing')
self.assertEqual(my_comp._init_params_dict['intvar']['val'], 777)
self.assertEqual(my_comp._init_params_dict['boolvar']['val'], True)
self.assertEqual(my_comp._init_params_dict['floatvar']['val'], -3.14)
self.assertEqual(my_comp._init_params_dict['expvar1']['val'], 1.5e-12)
self.assertEqual(my_comp._init_params_dict['expvar2']['val'], -1.5e12)
self.assertEqual(my_comp._init_params_dict['textvar']['val'], 'That')
self.assertEqual(my_comp._init_params_dict['arrayvar']['val'][0], 3.5)
self.assertEqual(my_comp._init_params_dict['arrayvar']['val'][1], 7.76)
self.assertEqual(my_comp._init_params_dict['arrayvar']['val'][2], 1.23)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit']['val'][0], 3.5)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit']['val'][1], 7.76)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit']['val'][2], 5.45)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit']['val'][3], 22.0)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit']['val'][4], 1.23)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit2']['val'][0], 1)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit2']['val'][1], 2)
self.assertEqual(my_comp._init_params_dict['arrayvarsplit2']['val'][2], 3)
self.assertEqual(my_comp._init_params_dict['arraysmall']['val'], 1.75)
self.assertEqual(my_comp._init_params_dict['arrayshorthand']['val'][4], 3.456)
self.assertEqual(len(my_comp._init_params_dict['arrayshorthand']['val']), 8)
self.assertEqual(my_comp._init_params_dict['single']['val'][0], 15.0)
self.assertEqual(my_comp._init_params_dict['singleint']['val'][3], 5)
self.assertEqual(my_comp._init_params_dict['stringarray']['val'][2], 'xyz')