def get_openmc_surface(openmoc_surface):
"""Return an OpenMC surface corresponding to an OpenMOC surface.
Parameters
----------
openmoc_surface : openmoc.Surface
OpenMOC surface
Returns
-------
openmc_surface : openmc.Surface
Equivalent OpenMC surface
"""
cv.check_type('openmoc_surface', openmoc_surface, openmoc.Surface)
surface_id = openmoc_surface.getId()
# If this Surface was already created, use it
if surface_id in OPENMC_SURFACES:
return OPENMC_SURFACES[surface_id]
# Create an OpenMC Surface to represent this OpenMOC Surface
name = openmoc_surface.getName()
# Correct for OpenMC's syntax for Surfaces dividing Cells
boundary = openmoc_surface.getBoundaryType()
if boundary == openmoc.VACUUM:
boundary = 'vacuum'
elif boundary == openmoc.REFLECTIVE:
boundary = 'reflective'
elif boundary == openmoc.PERIODIC:
boundary = 'periodic'
else:
boundary = 'transmission'
if openmoc_surface.getSurfaceType() == openmoc.PLANE:
openmoc_surface = openmoc.castSurfaceToPlane(openmoc_surface)
A = openmoc_surface.getA()
B = openmoc_surface.getB()
C = openmoc_surface.getC()
D = openmoc_surface.getD()
# OpenMOC uses the opposite sign on D
openmc_surface = openmc.Plane(surface_id, boundary, A, B, C, -D, name)
elif openmoc_surface.getSurfaceType() == openmoc.XPLANE:
openmoc_surface = openmoc.castSurfaceToXPlane(openmoc_surface)
x0 = openmoc_surface.getX()
openmc_surface = openmc.XPlane(surface_id, boundary, x0, name)
elif openmoc_surface.getSurfaceType() == openmoc.YPLANE:
openmoc_surface = openmoc.castSurfaceToYPlane(openmoc_surface)
y0 = openmoc_surface.getY()
openmc_surface = openmc.YPlane(surface_id, boundary, y0, name)
elif openmoc_surface.getSurfaceType() == openmoc.ZPLANE:
openmoc_surface = openmoc.castSurfaceToZPlane(openmoc_surface)
z0 = openmoc_surface.getZ()
openmc_surface = openmc.ZPlane(surface_id, boundary, z0, name)
elif openmoc_surface.getSurfaceType() == openmoc.ZCYLINDER:
openmoc_surface = openmoc.castSurfaceToZCylinder(openmoc_surface)
x0 = openmoc_surface.getX0()
y0 = openmoc_surface.getY0()
R = openmoc_surface.getRadius()
openmc_surface = openmc.ZCylinder(surface_id, boundary, x0, y0, R, name)
# Add the OpenMC Surface to the global collection of all OpenMC Surfaces
OPENMC_SURFACES[surface_id] = openmc_surface
# Add the OpenMOC Surface to the global collection of all OpenMOC Surfaces
OPENMOC_SURFACES[surface_id] = openmoc_surface
return openmc_surface
def get_opencg_surface(openmoc_surface):
"""Return an OpenCG surface corresponding to an OpenMOC surface.
Parameters
----------
openmc_surface : openmoc.Surface
OpenMOC surface
Returns
-------
opencg_surface : opencg.Surface
Equivalent OpenCG surface
"""
cv.check_type('openmoc_surface', openmoc_surface, openmoc.Surface)
global OPENCG_SURFACES
surface_id = openmoc_surface.getId()
# If this Surface was already created, use it
if surface_id in OPENCG_SURFACES:
return OPENCG_SURFACES[surface_id]
# Create an OpenCG Surface to represent this OpenMOC Surface
name = openmoc_surface.getName()
# Correct for OpenMOC's syntax for Surfaces dividing Cells
boundary = openmoc_surface.getBoundaryType()
if boundary == openmoc.VACUUM:
boundary = 'vacuum'
elif boundary == openmoc.REFLECTIVE:
boundary = 'reflective'
elif boundary == openmoc.BOUNDARY_NONE:
boundary = 'interface'
opencg_surface = None
surface_type = openmoc_surface.getSurfaceType()
if surface_type == openmoc.PLANE:
openmoc_surface = openmoc.castSurfaceToPlane(openmoc_surface)
A = openmoc_surface.getA()
B = openmoc_surface.getB()
C = openmoc_surface.getC()
D = openmoc_surface.getD()
opencg_surface = opencg.Plane(surface_id, name, boundary, A, B, C, D)
elif surface_type == openmoc.XPLANE:
openmoc_surface = openmoc.castSurfaceToXPlane(openmoc_surface)
x0 = openmoc_surface.getX()
opencg_surface = opencg.XPlane(surface_id, name, boundary, x0)
elif surface_type == openmoc.YPLANE:
openmoc_surface = openmoc.castSurfaceToYPlane(openmoc_surface)
y0 = openmoc_surface.getY()
opencg_surface = opencg.YPlane(surface_id, name, boundary, y0)
elif surface_type == openmoc.ZPLANE:
openmoc_surface = openmoc.castSurfaceToZPlane(openmoc_surface)
z0 = openmoc_surface.getZ()
opencg_surface = opencg.ZPlane(surface_id, name, boundary, z0)
elif surface_type == openmoc.ZCYLINDER:
openmoc_surface = openmoc.castSurfaceToZCylinder(openmoc_surface)
x0 = openmoc_surface.getX0()
y0 = openmoc_surface.getY0()
R = openmoc_surface.getRadius()
opencg_surface = opencg.ZCylinder(surface_id, name, boundary, x0, y0,
R)
# Add the OpenMOC Surface to the global collection of all OpenMOC Surfaces
OPENMOC_SURFACES[surface_id] = openmoc_surface
# Add the OpenCG Surface to the global collection of all OpenCG Surfaces
OPENCG_SURFACES[surface_id] = opencg_surface
return opencg_surface
def get_opencg_surface(openmoc_surface):
"""Return an OpenCG surface corresponding to an OpenMOC surface.
Parameters
----------
openmc_surface : openmoc.Surface
OpenMOC surface
Returns
-------
opencg_surface : opencg.Surface
Equivalent OpenCG surface
"""
cv.check_type('openmoc_surface', openmoc_surface, openmoc.Surface)
global OPENCG_SURFACES
surface_id = openmoc_surface.getId()
# If this Surface was already created, use it
if surface_id in OPENCG_SURFACES:
return OPENCG_SURFACES[surface_id]
# Create an OpenCG Surface to represent this OpenMOC Surface
name = openmoc_surface.getName()
# Correct for OpenMOC's syntax for Surfaces dividing Cells
boundary = openmoc_surface.getBoundaryType()
if boundary == openmoc.VACUUM:
boundary = 'vacuum'
elif boundary == openmoc.REFLECTIVE:
boundary = 'reflective'
elif boundary == openmoc.BOUNDARY_NONE:
boundary = 'interface'
opencg_surface = None
surface_type = openmoc_surface.getSurfaceType()
if surface_type == openmoc.PLANE:
openmoc_surface = openmoc.castSurfaceToPlane(openmoc_surface)
A = openmoc_surface.getA()
B = openmoc_surface.getB()
C = openmoc_surface.getC()
D = openmoc_surface.getD()
opencg_surface = opencg.Plane(surface_id, name, boundary, A, B, C, D)
elif surface_type == openmoc.XPLANE:
openmoc_surface = openmoc.castSurfaceToXPlane(openmoc_surface)
x0 = openmoc_surface.getX()
opencg_surface = opencg.XPlane(surface_id, name, boundary, x0)
elif surface_type == openmoc.YPLANE:
openmoc_surface = openmoc.castSurfaceToYPlane(openmoc_surface)
y0 = openmoc_surface.getY()
opencg_surface = opencg.YPlane(surface_id, name, boundary, y0)
elif surface_type == openmoc.ZPLANE:
openmoc_surface = openmoc.castSurfaceToZPlane(openmoc_surface)
z0 = openmoc_surface.getZ()
opencg_surface = opencg.ZPlane(surface_id, name, boundary, z0)
elif surface_type == openmoc.ZCYLINDER:
openmoc_surface = openmoc.castSurfaceToZCylinder(openmoc_surface)
x0 = openmoc_surface.getX0()
y0 = openmoc_surface.getY0()
R = openmoc_surface.getRadius()
opencg_surface = opencg.ZCylinder(surface_id, name, boundary, x0, y0, R)
# Add the OpenMOC Surface to the global collection of all OpenMOC Surfaces
OPENMOC_SURFACES[surface_id] = openmoc_surface
# Add the OpenCG Surface to the global collection of all OpenCG Surfaces
OPENCG_SURFACES[surface_id] = opencg_surface
return opencg_surface
def get_openmc_surface(openmoc_surface):
"""Return an OpenMC surface corresponding to an OpenMOC surface.
Parameters
----------
openmoc_surface : openmoc.Surface
OpenMOC surface
Returns
-------
openmc_surface : openmc.Surface
Equivalent OpenMC surface
"""
cv.check_type('openmoc_surface', openmoc_surface, openmoc.Surface)
surface_id = openmoc_surface.getId()
# If this Surface was already created, use it
if surface_id in OPENMC_SURFACES:
return OPENMC_SURFACES[surface_id]
# Create an OpenMC Surface to represent this OpenMOC Surface
name = openmoc_surface.getName()
# Correct for OpenMC's syntax for Surfaces dividing Cells
boundary = openmoc_surface.getBoundaryType()
if boundary == openmoc.VACUUM:
boundary = 'vacuum'
elif boundary == openmoc.REFLECTIVE:
boundary = 'reflective'
elif boundary == openmoc.PERIODIC:
boundary = 'periodic'
else:
boundary = 'transmission'
if openmoc_surface.getSurfaceType() == openmoc.PLANE:
openmoc_surface = openmoc.castSurfaceToPlane(openmoc_surface)
A = openmoc_surface.getA()
B = openmoc_surface.getB()
C = openmoc_surface.getC()
D = openmoc_surface.getD()
# OpenMOC uses the opposite sign on D
openmc_surface = openmc.Plane(surface_id, boundary, A, B, C, -D, name)
elif openmoc_surface.getSurfaceType() == openmoc.XPLANE:
openmoc_surface = openmoc.castSurfaceToXPlane(openmoc_surface)
x0 = openmoc_surface.getX()
openmc_surface = openmc.XPlane(surface_id, boundary, x0, name)
elif openmoc_surface.getSurfaceType() == openmoc.YPLANE:
openmoc_surface = openmoc.castSurfaceToYPlane(openmoc_surface)
y0 = openmoc_surface.getY()
openmc_surface = openmc.YPlane(surface_id, boundary, y0, name)
elif openmoc_surface.getSurfaceType() == openmoc.ZPLANE:
openmoc_surface = openmoc.castSurfaceToZPlane(openmoc_surface)
z0 = openmoc_surface.getZ()
openmc_surface = openmc.ZPlane(surface_id, boundary, z0, name)
elif openmoc_surface.getSurfaceType() == openmoc.ZCYLINDER:
openmoc_surface = openmoc.castSurfaceToZCylinder(openmoc_surface)
x0 = openmoc_surface.getX0()
y0 = openmoc_surface.getY0()
R = openmoc_surface.getRadius()
openmc_surface = openmc.ZCylinder(surface_id, boundary, x0, y0, R, name)
# Add the OpenMC Surface to the global collection of all OpenMC Surfaces
OPENMC_SURFACES[surface_id] = openmc_surface
# Add the OpenMOC Surface to the global collection of all OpenMOC Surfaces
OPENMOC_SURFACES[surface_id] = openmoc_surface
return openmc_surface
def get_opencg_surface(openmoc_surface):
if not isinstance(openmoc_surface, openmoc.Surface):
msg = 'Unable to create an OpenCG Surface from {0} ' \
'which is not an OpenMOC Surface'.format(openmoc_surface)
raise ValueError(msg)
global OPENCG_SURFACES
surface_id = openmoc_surface.getId()
# If this Surface was already created, use it
if surface_id in OPENCG_SURFACES:
return OPENCG_SURFACES[surface_id]
# Create an OpenCG Surface to represent this OpenMOC Surface
name = openmoc_surface.getName()
# Correct for OpenMOC's syntax for Surfaces dividing Cells
boundary = openmoc_surface.getBoundaryType()
if boundary == openmoc.VACUUM:
boundary = 'vacuum'
elif boundary == openmoc.REFLECTIVE:
boundary = 'reflective'
elif boundary == openmoc.BOUNDARY_NONE:
boundary = 'interface'
opencg_surface = None
surface_type = openmoc_surface.getSurfaceType()
if surface_type == openmoc.PLANE:
openmoc_surface = openmoc.castSurfaceToPlane(openmoc_surface)
A = openmoc_surface.getA()
B = openmoc_surface.getB()
C = openmoc_surface.getC()
opencg_surface = opencg.Plane(surface_id, name, boundary, A, B, 0, C)
elif surface_type == openmoc.XPLANE:
openmoc_surface = openmoc.castSurfaceToXPlane(openmoc_surface)
x0 = openmoc_surface.getX()
opencg_surface = opencg.XPlane(surface_id, name, boundary, x0)
elif surface_type == openmoc.YPLANE:
openmoc_surface = openmoc.castSurfaceToYPlane(openmoc_surface)
y0 = openmoc_surface.getY()
opencg_surface = opencg.YPlane(surface_id, name, boundary, y0)
elif surface_type == openmoc.ZPLANE:
openmoc_surface = openmoc.castSurfaceToZPlane(openmoc_surface)
z0 = openmoc_surface.getZ()
opencg_surface = opencg.ZPlane(surface_id, name, boundary, z0)
elif surface_type == openmoc.ZYCLINDER:
openmoc_surface = openmoc.castSurfaceToZCylinder(openmoc_surface)
x0 = openmoc_surface.getX0()
y0 = openmoc_surface.getY0()
R = openmoc_surface.getRadius()
opencg_surface = opencg.ZCylinder(surface_id, name, boundary, x0, y0,
R)
# Add the OpenMOC Surface to the global collection of all OpenMOC Surfaces
OPENMOC_SURFACES[surface_id] = openmoc_surface
# Add the OpenCG Surface to the global collection of all OpenCG Surfaces
OPENCG_SURFACES[surface_id] = opencg_surface
return opencg_surface
def get_opencg_surface(openmoc_surface):
if not isinstance(openmoc_surface, openmoc.Surface):
msg = 'Unable to create an OpenCG Surface from {0} ' \
'which is not an OpenMOC Surface'.format(openmoc_surface)
raise ValueError(msg)
global OPENCG_SURFACES
surface_id = openmoc_surface.getId()
# If this Surface was already created, use it
if surface_id in OPENCG_SURFACES:
return OPENCG_SURFACES[surface_id]
# Create an OpenCG Surface to represent this OpenMOC Surface
name = openmoc_surface.getName()
# Correct for OpenMOC's syntax for Surfaces dividing Cells
boundary = openmoc_surface.getBoundaryType()
if boundary == openmoc.VACUUM:
boundary = 'vacuum'
elif boundary == openmoc.REFLECTIVE:
boundary = 'reflective'
elif boundary == openmoc.BOUNDARY_NONE:
boundary = 'interface'
opencg_surface = None
surface_type = openmoc_surface.getSurfaceType()
if surface_type == openmoc.PLANE:
openmoc_surface = openmoc.castSurfaceToPlane(openmoc_surface)
A = openmoc_surface.getA()
B = openmoc_surface.getB()
C = openmoc_surface.getC()
opencg_surface = opencg.Plane(surface_id, name, boundary, A, B, 0, C)
elif surface_type == openmoc.XPLANE:
openmoc_surface = openmoc.castSurfaceToXPlane(openmoc_surface)
x0 = openmoc_surface.getX()
opencg_surface = opencg.XPlane(surface_id, name, boundary, x0)
elif surface_type == openmoc.YPLANE:
openmoc_surface = openmoc.castSurfaceToYPlane(openmoc_surface)
y0 = openmoc_surface.getY()
opencg_surface = opencg.YPlane(surface_id, name, boundary, y0)
elif surface_type == openmoc.ZPLANE:
openmoc_surface = openmoc.castSurfaceToZPlane(openmoc_surface)
z0 = openmoc_surface.getZ()
opencg_surface = opencg.ZPlane(surface_id, name, boundary, z0)
elif surface_type == openmoc.CIRCLE:
openmoc_surface = openmoc.castSurfaceToCircle(openmoc_surface)
x0 = openmoc_surface.getX0()
y0 = openmoc_surface.getY0()
R = openmoc_surface.getRadius()
opencg_surface = opencg.ZCylinder(surface_id, name, boundary, x0, y0, R)
# Add the OpenMOC Surface to the global collection of all OpenMOC Surfaces
OPENMOC_SURFACES[surface_id] = openmoc_surface
# Add the OpenCG Surface to the global collection of all OpenCG Surfaces
OPENCG_SURFACES[surface_id] = opencg_surface
return opencg_surface
