def test_plot_contour_log_scale_and_str_category() -> None:
# If the search space has three parameters, plot_contour generates nine plots.
study = create_study()
study.add_trial(
create_trial(
value=0.0,
params={
"param_a": 1e-6,
"param_b": "100",
"param_c": "one"
},
distributions={
"param_a": FloatDistribution(1e-7, 1e-2, log=True),
"param_b": CategoricalDistribution(["100", "101"]),
"param_c": CategoricalDistribution(["one", "two"]),
},
))
study.add_trial(
create_trial(
value=1.0,
params={
"param_a": 1e-5,
"param_b": "101",
"param_c": "two"
},
distributions={
"param_a": FloatDistribution(1e-7, 1e-2, log=True),
"param_b": CategoricalDistribution(["100", "101"]),
"param_c": CategoricalDistribution(["one", "two"]),
},
))
figure = plot_contour(study)
subplots = [plot for plot in figure.flatten() if plot.has_data()]
expected = {
"param_a": [1e-6, 1e-5],
"param_b": [0.0, 1.0],
"param_c": [0.0, 1.0]
}
ranges = itertools.permutations(expected.keys(), 2)
for plot, (yrange, xrange) in zip(subplots, ranges):
# Take 5% axis padding into account.
np.testing.assert_allclose(plot.get_xlim(),
expected[xrange],
atol=5e-2)
np.testing.assert_allclose(plot.get_ylim(),
expected[yrange],
atol=5e-2)
plt.savefig(BytesIO())
def test_dominates_invalid() -> None:
directions = [StudyDirection.MINIMIZE, StudyDirection.MAXIMIZE]
# The numbers of objectives for `t1` and `t2` don't match.
t1 = create_trial(values=[1]) # One objective.
t2 = create_trial(values=[1, 2]) # Two objectives.
with pytest.raises(ValueError):
_dominates(t1, t2, directions)
# The numbers of objectives and directions don't match.
t1 = create_trial(values=[1]) # One objective.
t2 = create_trial(values=[1]) # One objective.
with pytest.raises(ValueError):
_dominates(t1, t2, directions)
def test_color_map(direction: str) -> None:
study = create_study(direction=direction)
for i in range(3):
study.add_trial(
create_trial(
value=float(i),
params={
"param_a": float(i),
"param_b": float(i)
},
distributions={
"param_a": FloatDistribution(0.0, 3.0),
"param_b": FloatDistribution(0.0, 3.0),
},
))
# `target` is `None`.
line = plotly_plot_parallel_coordinate(study).data[0]["line"]
assert COLOR_SCALE == [v[1] for v in line["colorscale"]]
if direction == "minimize":
assert line["reversescale"]
else:
assert not line["reversescale"]
# When `target` is not `None`, `reversescale` is always `True`.
line = plotly_plot_parallel_coordinate(
study, target=lambda t: t.number).data[0]["line"]
assert COLOR_SCALE == [v[1] for v in line["colorscale"]]
assert line["reversescale"]
# Multi-objective optimization.
study = create_study(directions=[direction, direction])
for i in range(3):
study.add_trial(
create_trial(
values=[float(i), float(i)],
params={
"param_a": float(i),
"param_b": float(i)
},
distributions={
"param_a": FloatDistribution(0.0, 3.0),
"param_b": FloatDistribution(0.0, 3.0),
},
))
line = plotly_plot_parallel_coordinate(
study, target=lambda t: t.number).data[0]["line"]
assert COLOR_SCALE == [v[1] for v in line["colorscale"]]
assert line["reversescale"]
def test_plot_parallel_coordinate_unique_hyper_param() -> None:
# Test case when one unique value is suggested during the optimization.
study_categorical_params = create_study()
distributions: Dict[str, BaseDistribution] = {
"category_a": CategoricalDistribution(("preferred", "opt")),
"param_b": FloatDistribution(1, 1000, log=True),
}
study_categorical_params.add_trial(
create_trial(
value=0.0,
params={"category_a": "preferred", "param_b": 30},
distributions=distributions,
)
)
# Both hyperparameters contain unique values.
figure = plot_parallel_coordinate(study_categorical_params)
assert len(figure.data[0]["dimensions"]) == 3
assert figure.data[0]["dimensions"][0]["label"] == "Objective Value"
assert figure.data[0]["dimensions"][0]["range"] == (0.0, 0.0)
assert figure.data[0]["dimensions"][0]["values"] == (0.0,)
assert figure.data[0]["dimensions"][1]["label"] == "category_a"
assert figure.data[0]["dimensions"][1]["range"] == (0, 0)
assert figure.data[0]["dimensions"][1]["values"] == (0.0,)
assert figure.data[0]["dimensions"][1]["ticktext"] == ("preferred",)
assert figure.data[0]["dimensions"][1]["tickvals"] == (0,)
assert figure.data[0]["dimensions"][2]["label"] == "param_b"
assert figure.data[0]["dimensions"][2]["range"] == (math.log10(30), math.log10(30))
assert figure.data[0]["dimensions"][2]["values"] == (math.log10(30),)
assert figure.data[0]["dimensions"][2]["ticktext"] == ("30",)
assert figure.data[0]["dimensions"][2]["tickvals"] == (math.log10(30),)
study_categorical_params.add_trial(
create_trial(
value=2.0,
params={"category_a": "preferred", "param_b": 20},
distributions=distributions,
)
)
# Still "category_a" contains unique suggested value during the optimization.
figure = plot_parallel_coordinate(study_categorical_params)
assert len(figure.data[0]["dimensions"]) == 3
assert figure.data[0]["dimensions"][1]["label"] == "category_a"
assert figure.data[0]["dimensions"][1]["range"] == (0, 0)
assert figure.data[0]["dimensions"][1]["values"] == (0.0, 0.0)
assert figure.data[0]["dimensions"][1]["ticktext"] == ("preferred",)
assert figure.data[0]["dimensions"][1]["tickvals"] == (0,)
def test_generate_contour_plot_for_few_observations(params: List[str]) -> None:
study = create_study(direction="minimize")
study.add_trial(
create_trial(
values=[0.0],
params={
"param_a": 1.0,
"param_b": 2.0
},
distributions={
"param_a": FloatDistribution(0.0, 3.0),
"param_b": FloatDistribution(0.0, 3.0),
},
))
study.add_trial(
create_trial(
values=[2.0],
params={"param_b": 0.0},
distributions={"param_b": FloatDistribution(0.0, 3.0)},
))
info = _get_contour_info(study, params=params)
assert info == _ContourInfo(
sorted_params=sorted(params),
sub_plot_infos=[[
_SubContourInfo(
xaxis=_AxisInfo(
name=sorted(params)[0],
range=(1.0, 1.0),
is_log=False,
is_cat=False,
indices=[1.0],
values=[1.0, None],
),
yaxis=_AxisInfo(
name=sorted(params)[1],
range=(-0.1, 2.1),
is_log=False,
is_cat=False,
indices=[-0.1, 0.0, 2.0, 2.1],
values=[2.0, 0.0],
),
z_values={},
)
]],
reverse_scale=True,
target_name="Objective Value",
)
def test_plot_parallel_coordinate_log_params() -> None:
# Test with log params.
study_log_params = create_study()
study_log_params.add_trial(
create_trial(
value=0.0,
params={"param_a": 1e-6, "param_b": 10},
distributions={
"param_a": LogUniformDistribution(1e-7, 1e-2),
"param_b": LogUniformDistribution(1, 1000),
},
)
)
study_log_params.add_trial(
create_trial(
value=1.0,
params={"param_a": 2e-5, "param_b": 200},
distributions={
"param_a": LogUniformDistribution(1e-7, 1e-2),
"param_b": LogUniformDistribution(1, 1000),
},
)
)
study_log_params.add_trial(
create_trial(
value=0.1,
params={"param_a": 1e-4, "param_b": 30},
distributions={
"param_a": LogUniformDistribution(1e-7, 1e-2),
"param_b": LogUniformDistribution(1, 1000),
},
)
)
figure = plot_parallel_coordinate(study_log_params)
assert len(figure.data[0]["dimensions"]) == 3
assert figure.data[0]["dimensions"][0]["label"] == "Objective Value"
assert figure.data[0]["dimensions"][0]["range"] == (0.0, 1.0)
assert figure.data[0]["dimensions"][0]["values"] == (0.0, 1.0, 0.1)
assert figure.data[0]["dimensions"][1]["label"] == "param_a"
assert figure.data[0]["dimensions"][1]["range"] == (-6.0, -4.0)
assert figure.data[0]["dimensions"][1]["values"] == (-6, math.log10(2e-5), -4)
assert figure.data[0]["dimensions"][1]["ticktext"] == ("1e-06", "1e-05", "0.0001")
assert figure.data[0]["dimensions"][1]["tickvals"] == (-6, -5, -4.0)
assert figure.data[0]["dimensions"][2]["label"] == "param_b"
assert figure.data[0]["dimensions"][2]["range"] == (1.0, math.log10(200))
assert figure.data[0]["dimensions"][2]["values"] == (1.0, math.log10(200), math.log10(30))
assert figure.data[0]["dimensions"][2]["ticktext"] == ("10", "100", "200")
assert figure.data[0]["dimensions"][2]["tickvals"] == (1.0, 2.0, math.log10(200))
def test_inconsistent_number_of_trial_values() -> None:
studies: List[Study] = []
n_studies = 5
for i in range(n_studies):
study = prepare_study_with_trials()
if i % 2 == 0:
study.add_trial(create_trial(value=1.0))
studies.append(study)
edf_info = _get_edf_info(studies)
x_values = edf_info.x_values
min_objective = 0.0
max_objective = 2.0
assert np.min(x_values) == min_objective
assert np.max(x_values) == max_objective
assert len(x_values) == NUM_SAMPLES_X_AXIS
lines = edf_info.lines
assert len(lines) == n_studies
for line, study in zip(lines, studies):
assert line.study_name == study.study_name
_validate_edf_values(line.y_values)
def enqueue_trial(self, params: Dict[str, Any]) -> None:
"""Enqueue a trial with given parameter values.
You can fix the next sampling parameters which will be evaluated in your
objective function.
Example:
.. testcode::
import optuna
def objective(trial):
x = trial.suggest_uniform("x", 0, 10)
return x ** 2
study = optuna.create_study()
study.enqueue_trial({"x": 5})
study.enqueue_trial({"x": 0})
study.optimize(objective, n_trials=2)
assert study.trials[0].params == {"x": 5}
assert study.trials[1].params == {"x": 0}
Args:
params:
Parameter values to pass your objective function.
"""
self.add_trial(
create_trial(state=TrialState.WAITING,
system_attrs={"fixed_params": params}))
def test_plot_slice_log_scale() -> None:
study = create_study()
study.add_trial(
create_trial(
value=0.0,
params={"x_linear": 1.0, "y_log": 1e-3},
distributions={
"x_linear": UniformDistribution(0.0, 3.0),
"y_log": LogUniformDistribution(1e-5, 1.0),
},
)
)
# Plot a parameter.
figure = plot_slice(study, params=["y_log"])
assert len(figure.get_lines()) == 0
assert figure.xaxis.label.get_text() == "y_log"
figure = plot_slice(study, params=["x_linear"])
assert len(figure.get_lines()) == 0
assert figure.xaxis.label.get_text() == "x_linear"
# Plot multiple parameters.
figure = plot_slice(study)
assert len(figure) == 2
assert len(figure[0].get_lines()) == 0
assert len(figure[1].get_lines()) == 0
assert figure[0].xaxis.label.get_text() == "x_linear"
assert figure[1].xaxis.label.get_text() == "y_log"
def _create_trial(
trial_type: type,
params: Optional[Dict[str, Any]] = None,
distributions: Optional[Dict[str, BaseDistribution]] = None,
) -> BaseTrial:
if params is None:
params = {"x": 10}
assert params is not None
if distributions is None:
distributions = {"x": FloatDistribution(5, 12)}
assert distributions is not None
if trial_type == FixedTrial:
return FixedTrial(params)
elif trial_type == FrozenTrial:
trial = create_trial(value=0.2,
params=params,
distributions=distributions)
trial.number = 0
return trial
elif trial_type == Trial:
study = create_study()
study.enqueue_trial(params)
return study.ask()
else:
assert False
def test_multi_objective_fanova_importance_evaluator_with_infinite(
target_idx: int, inf_value: float
) -> None:
# The test ensures that trials with infinite values are ignored to calculate importance scores.
n_trial = 10
seed = 13
# Importance scores are calculated without a trial with an inf value.
study = create_study(directions=["minimize", "minimize"], sampler=RandomSampler(seed=seed))
study.optimize(multi_objective_function, n_trials=n_trial)
evaluator = FanovaImportanceEvaluator(seed=seed)
param_importance_without_inf = evaluator.evaluate(study, target=lambda t: t.values[target_idx])
# A trial with an inf value is added into the study manually.
study.add_trial(
create_trial(
values=[inf_value, inf_value],
params={"x1": 1.0, "x2": 1.0, "x3": 3.0},
distributions={
"x1": FloatDistribution(low=0.1, high=3),
"x2": FloatDistribution(low=0.1, high=3, log=True),
"x3": FloatDistribution(low=2, high=4, log=True),
},
)
)
# Importance scores are calculated with a trial with an inf value.
param_importance_with_inf = evaluator.evaluate(study, target=lambda t: t.values[target_idx])
# Obtained importance scores should be the same between with inf and without inf,
# because the last trial whose objective value is an inf is ignored.
assert param_importance_with_inf == param_importance_without_inf
def test_plot_slice_log_scale() -> None:
study = create_study()
study.add_trial(
create_trial(
value=0.0,
params={"x_linear": 1.0, "y_log": 1e-3},
distributions={
"x_linear": UniformDistribution(0.0, 3.0),
"y_log": LogUniformDistribution(1e-5, 1.0),
},
)
)
# Plot a parameter.
# TODO(ytknzw): Add more specific assertion with the test case.
figure = plot_slice(study, params=["y_log"])
assert figure.has_data()
figure = plot_slice(study, params=["x_linear"])
assert figure.has_data()
# Plot multiple parameters.
# TODO(ytknzw): Add more specific assertion with the test case.
figure = plot_slice(study)
assert len(figure) == 2
assert figure[0].has_data()
assert figure[1].has_data()
def test_shap_importance_evaluator_with_infinite(inf_value: float) -> None:
# The test ensures that trials with infinite values are ignored to calculate importance scores.
n_trial = 10
seed = 13
# Importance scores are calculated without a trial with an inf value.
study = create_study(sampler=RandomSampler(seed=seed))
study.optimize(objective, n_trials=n_trial)
evaluator = ShapleyImportanceEvaluator(seed=seed)
param_importance_without_inf = evaluator.evaluate(study)
# A trial with an inf value is added into the study manually.
study.add_trial(
create_trial(
value=inf_value,
params={"x1": 1.0, "x2": 1.0, "x3": 3.0, "x4": 0.1},
distributions={
"x1": FloatDistribution(low=0.1, high=3),
"x2": FloatDistribution(low=0.1, high=3, log=True),
"x3": IntDistribution(low=2, high=4, log=True),
"x4": CategoricalDistribution([0.1, 1, 10]),
},
)
)
# Importance scores are calculated with a trial with an inf value.
param_importance_with_inf = evaluator.evaluate(study)
# Obtained importance scores should be the same between with inf and without inf,
# because the last trial whose objective value is an inf is ignored.
assert param_importance_with_inf == param_importance_without_inf
def test_plot_slice_log_scale() -> None:
study = create_study()
study.add_trial(
create_trial(
value=0.0,
params={
"x_linear": 1.0,
"y_log": 1e-3
},
distributions={
"x_linear": UniformDistribution(0.0, 3.0),
"y_log": LogUniformDistribution(1e-5, 1.0),
},
))
# Plot a parameter.
figure = plot_slice(study, params=["y_log"])
assert figure.layout["xaxis_type"] == "log"
figure = plot_slice(study, params=["x_linear"])
assert figure.layout["xaxis_type"] is None
# Plot multiple parameters.
figure = plot_slice(study)
assert figure.layout["xaxis_type"] is None
assert figure.layout["xaxis2_type"] == "log"
def test_create_trial(state: TrialState) -> None:
value = 0.2
params = {"x": 10}
distributions = {"x": UniformDistribution(5, 12)}
user_attrs = {"foo": "bar"}
system_attrs = {"baz": "qux"}
intermediate_values = {0: 0.0, 1: 0.1, 2: 0.1}
trial = create_trial(
state=state,
value=value,
params=params,
distributions=distributions,
user_attrs=user_attrs,
system_attrs=system_attrs,
intermediate_values=intermediate_values,
)
assert isinstance(trial, FrozenTrial)
assert trial.state == (state if state is not None else TrialState.COMPLETE)
assert trial.value == value
assert trial.params == params
assert trial.distributions == distributions
assert trial.user_attrs == user_attrs
assert trial.system_attrs == system_attrs
assert trial.intermediate_values == intermediate_values
assert trial.datetime_start is not None
assert (trial.datetime_complete is not None) == (state is None
or state.is_finished())
def test_called_single_methods_when_multi() -> None:
state = TrialState.COMPLETE
values = (0.2, 0.3)
params = {"x": 10}
distributions = {"x": UniformDistribution(5, 12)}
user_attrs = {"foo": "bar"}
system_attrs = {"baz": "qux"}
intermediate_values = {0: 0.0, 1: 0.1, 2: 0.1}
trial = create_trial(
state=state,
values=values,
params=params,
distributions=distributions,
user_attrs=user_attrs,
system_attrs=system_attrs,
intermediate_values=intermediate_values,
)
with pytest.raises(RuntimeError):
trial.value
with pytest.raises(RuntimeError):
trial.value = 0.1
with pytest.raises(RuntimeError):
trial.value = [0.1]
def test_plot_parallel_coordinate_log_params() -> None:
# Test with log params.
study_log_params = create_study()
distributions: Dict[str, BaseDistribution] = {
"param_a": FloatDistribution(1e-7, 1e-2, log=True),
"param_b": FloatDistribution(1, 1000, log=True),
}
study_log_params.add_trial(
create_trial(
value=0.0,
params={
"param_a": 1e-6,
"param_b": 10
},
distributions=distributions,
))
study_log_params.add_trial(
create_trial(
value=1.0,
params={
"param_a": 2e-5,
"param_b": 200
},
distributions=distributions,
))
study_log_params.add_trial(
create_trial(
value=0.1,
params={
"param_a": 1e-4,
"param_b": 30
},
distributions=distributions,
))
figure = plot_parallel_coordinate(study_log_params)
axes = figure.get_figure().axes
assert len(axes) == 3 + 1
assert axes[0].get_ylim() == (0.0, 1.0)
assert axes[1].get_ylabel() == "Objective Value"
assert axes[1].get_ylim() == (0.0, 1.0)
objectives = _fetch_objectives_from_figure(figure)
assert objectives == [0.0, 1.0, 0.1]
assert axes[2].get_ylim() == (1e-6, 1e-4)
np.testing.assert_almost_equal(axes[3].get_ylim(), (10.0, 200))
expected_labels = ["Objective Value", "param_a", "param_b"]
_test_xtick_labels(axes, expected_labels)
plt.savefig(BytesIO())
def test_dominates_2d() -> None:
directions = [StudyDirection.MINIMIZE, StudyDirection.MAXIMIZE]
# Check all pairs of trials consisting of these values, i.e.,
# [-inf, -inf], [-inf, -1], [-inf, 1], [-inf, inf], [-1, -inf], ...
# These values should be specified in ascending order.
vals = [-float("inf"), -1, 1, float("inf")]
# The following table illustrates an example of dominance relations.
# "d" cells in the table dominates the "t" cell in (MINIMIZE, MAXIMIZE) setting.
#
# value1
# ╔═════╤═════╤═════╤═════╤═════╗
# ║ │ -∞ │ -1 │ 1 │ ∞ ║
# ╟─────┼─────┼─────┼─────┼─────╢
# ║ -∞ │ │ │ d │ d ║
# ╟─────┼─────┼─────┼─────┼─────╢
# ║ -1 │ │ │ d │ d ║
# value0 ╟─────┼─────┼─────┼─────┼─────╢
# ║ 1 │ │ │ t │ d ║
# ╟─────┼─────┼─────┼─────┼─────╢
# ║ ∞ │ │ │ │ ║
# ╚═════╧═════╧═════╧═════╧═════╝
#
# In the following code, we check that for each position of "t" cell, the relation
# above holds.
# Generate the set of all possible indices.
all_indices = set(
(i, j) for i in range(len(vals)) for j in range(len(vals)))
for (t_i, t_j) in all_indices:
# Generate the set of all indices that dominates the current index.
dominating_indices = set((d_i, d_j) for d_i in range(t_i + 1)
for d_j in range(t_j, len(vals)))
dominating_indices -= {(t_i, t_j)}
for (d_i, d_j) in dominating_indices:
trial1 = create_trial(values=[vals[t_i], vals[t_j]])
trial2 = create_trial(values=[vals[d_i], vals[d_j]])
assert _dominates(trial2, trial1, directions)
for (d_i, d_j) in all_indices - dominating_indices:
trial1 = create_trial(values=[vals[t_i], vals[t_j]])
trial2 = create_trial(values=[vals[d_i], vals[d_j]])
assert not _dominates(trial2, trial1, directions)
def test_plot_parallel_coordinate_categorical_numeric_params() -> None:
# Test with categorical params that can be interpreted as numeric params.
study_categorical_params = create_study()
distributions: Dict[str, BaseDistribution] = {
"category_a": CategoricalDistribution((1, 2)),
"category_b": CategoricalDistribution((10, 20, 30)),
}
study_categorical_params.add_trial(
create_trial(
value=0.0,
params={"category_a": 2, "category_b": 20},
distributions=distributions,
)
)
study_categorical_params.add_trial(
create_trial(
value=1.0,
params={"category_a": 1, "category_b": 30},
distributions=distributions,
)
)
study_categorical_params.add_trial(
create_trial(
value=2.0,
params={"category_a": 2, "category_b": 10},
distributions=distributions,
)
)
# Trials are sorted by using param_a and param_b, i.e., trial#1, trial#2, and trial#0.
figure = plot_parallel_coordinate(study_categorical_params)
assert len(figure.data[0]["dimensions"]) == 3
assert figure.data[0]["dimensions"][0]["label"] == "Objective Value"
assert figure.data[0]["dimensions"][0]["range"] == (0.0, 2.0)
assert figure.data[0]["dimensions"][0]["values"] == (1.0, 2.0, 0.0)
assert figure.data[0]["dimensions"][1]["label"] == "category_a"
assert figure.data[0]["dimensions"][1]["range"] == (0, 1)
assert figure.data[0]["dimensions"][1]["values"] == (0, 1, 1)
assert figure.data[0]["dimensions"][1]["ticktext"] == (1, 2)
assert figure.data[0]["dimensions"][1]["tickvals"] == (0, 1)
assert figure.data[0]["dimensions"][2]["label"] == "category_b"
assert figure.data[0]["dimensions"][2]["range"] == (0, 2)
assert figure.data[0]["dimensions"][2]["values"] == (2, 0, 1)
assert figure.data[0]["dimensions"][2]["ticktext"] == (10, 20, 30)
assert figure.data[0]["dimensions"][2]["tickvals"] == (0, 1, 2)
def test_plot_parallel_coordinate_categorical_numeric_params() -> None:
# Test with categorical params that can be interpreted as numeric params.
study_categorical_params = create_study()
study_categorical_params.add_trial(
create_trial(
value=0.0,
params={
"category_a": 2,
"category_b": 20
},
distributions={
"category_a": CategoricalDistribution((1, 2)),
"category_b": CategoricalDistribution((10, 20, 30)),
},
))
study_categorical_params.add_trial(
create_trial(
value=1.0,
params={
"category_a": 1,
"category_b": 30
},
distributions={
"category_a": CategoricalDistribution((1, 2)),
"category_b": CategoricalDistribution((10, 20, 30)),
},
))
study_categorical_params.add_trial(
create_trial(
value=2.0,
params={
"category_a": 2,
"category_b": 10
},
distributions={
"category_a": CategoricalDistribution((1, 2)),
"category_b": CategoricalDistribution((10, 20, 30)),
},
))
figure = plot_parallel_coordinate(study_categorical_params)
assert len(figure.get_lines()) == 0
plt.savefig(BytesIO())
def test_get_slice_plot_info_for_few_observations(params: List[str]) -> None:
study = create_study(direction="minimize")
study.add_trial(
create_trial(
values=[0.0],
params={
"param_a": 1.0,
"param_b": 2.0
},
distributions={
"param_a": FloatDistribution(0.0, 3.0),
"param_b": FloatDistribution(0.0, 3.0),
},
))
study.add_trial(
create_trial(
values=[2.0],
params={"param_b": 0.0},
distributions={"param_b": FloatDistribution(0.0, 3.0)},
))
info = _get_slice_plot_info(study, params, None, "Objective Value")
assert info == _SlicePlotInfo(
target_name="Objective Value",
subplots=[
_SliceSubplotInfo(
param_name="param_a",
x=[1.0],
y=[0.0],
trial_numbers=[0],
is_log=False,
is_numerical=True,
),
_SliceSubplotInfo(
param_name="param_b",
x=[2.0, 0.0],
y=[0.0, 2.0],
trial_numbers=[0, 1],
is_log=False,
is_numerical=True,
),
],
)
def test_plot_parallel_coordinate_log_params() -> None:
# Test with log params
study_log_params = create_study()
study_log_params.add_trial(
create_trial(
value=0.0,
params={
"param_a": 1e-6,
"param_b": 10
},
distributions={
"param_a": FloatDistribution(1e-7, 1e-2, log=True),
"param_b": FloatDistribution(1, 1000, log=True),
},
))
study_log_params.add_trial(
create_trial(
value=1.0,
params={
"param_a": 2e-5,
"param_b": 200
},
distributions={
"param_a": FloatDistribution(1e-7, 1e-2, log=True),
"param_b": FloatDistribution(1, 1000, log=True),
},
))
study_log_params.add_trial(
create_trial(
value=0.1,
params={
"param_a": 1e-4,
"param_b": 30
},
distributions={
"param_a": FloatDistribution(1e-7, 1e-2, log=True),
"param_b": FloatDistribution(1, 1000, log=True),
},
))
figure = plot_parallel_coordinate(study_log_params)
assert len(figure.get_lines()) == 0
plt.savefig(BytesIO())
def test_plot_parallel_coordinate_categorical_params() -> None:
# Test with categorical params that cannot be converted to numeral.
study_categorical_params = create_study()
distributions: Dict[str, BaseDistribution] = {
"category_a": CategoricalDistribution(("preferred", "opt")),
"category_b": CategoricalDistribution(("net", "una")),
}
study_categorical_params.add_trial(
create_trial(
value=0.0,
params={
"category_a": "preferred",
"category_b": "net"
},
distributions=distributions,
))
study_categorical_params.add_trial(
create_trial(
value=2.0,
params={
"category_a": "opt",
"category_b": "una"
},
distributions=distributions,
))
figure = plot_parallel_coordinate(study_categorical_params)
axes = figure.get_figure().axes
assert len(axes) == 3 + 1
assert axes[0].get_ylim() == (0.0, 2.0)
assert axes[1].get_ylabel() == "Objective Value"
assert axes[1].get_ylim() == (0.0, 2.0)
assert axes[2].get_ylim() == (0, 1)
assert [line.get_text()
for line in axes[2].get_yticklabels()] == ["preferred", "opt"]
assert axes[3].get_ylim() == (0, 1)
assert [line.get_text()
for line in axes[3].get_yticklabels()] == ["net", "una"]
objectives = _fetch_objectives_from_figure(figure)
assert objectives == [0.0, 2.0]
expected_labels = ["Objective Value", "category_a", "category_b"]
_test_xtick_labels(axes, expected_labels)
plt.savefig(BytesIO())
def test_filter_inf_trials(value: float, expected: int) -> None:
study = create_study()
study.add_trial(
create_trial(
value=0.0,
params={"x": 1.0},
distributions={"x": FloatDistribution(0.0, 1.0)},
))
study.add_trial(
create_trial(
value=value,
params={"x": 0.0},
distributions={"x": FloatDistribution(0.0, 1.0)},
))
trials = _filter_nonfinite(
study.get_trials(states=(TrialState.COMPLETE, )))
assert len(trials) == expected
assert all([t.number == num for t, num in zip(trials, range(expected))])
def test_plot_parallel_coordinate_log_params() -> None:
# Test with log params
study_log_params = create_study()
study_log_params.add_trial(
create_trial(
value=0.0,
params={
"param_a": 1e-6,
"param_b": 10
},
distributions={
"param_a": LogUniformDistribution(1e-7, 1e-2),
"param_b": LogUniformDistribution(1, 1000),
},
))
study_log_params.add_trial(
create_trial(
value=1.0,
params={
"param_a": 2e-5,
"param_b": 200
},
distributions={
"param_a": LogUniformDistribution(1e-7, 1e-2),
"param_b": LogUniformDistribution(1, 1000),
},
))
study_log_params.add_trial(
create_trial(
value=0.1,
params={
"param_a": 1e-4,
"param_b": 30
},
distributions={
"param_a": LogUniformDistribution(1e-7, 1e-2),
"param_b": LogUniformDistribution(1, 1000),
},
))
figure = plot_parallel_coordinate(study_log_params)
assert figure.has_data()
def test_multi_objective_trial_with_infinite_value_ignored(
target_idx: int, inf_value: float, evaluator: BaseImportanceEvaluator,
n_trial: int) -> None:
def _multi_objective_function(trial: Trial) -> Tuple[float, float]:
x1 = trial.suggest_float("x1", 0.1, 3)
x2 = trial.suggest_float("x2", 0.1, 3, log=True)
x3 = trial.suggest_float("x3", 2, 4, log=True)
return x1, x2 * x3
seed = 13
target_name = "Objective Value"
study = create_study(directions=["minimize", "minimize"],
sampler=RandomSampler(seed=seed))
study.optimize(_multi_objective_function, n_trials=n_trial)
# Create param importances info without inf value.
info_without_inf = _get_importances_info(
study,
evaluator=evaluator,
params=None,
target=lambda t: t.values[target_idx],
target_name=target_name,
)
# A trial with an inf value is added into the study manually.
study.add_trial(
create_trial(
values=[inf_value, inf_value],
params={
"x1": 1.0,
"x2": 1.0,
"x3": 3.0
},
distributions={
"x1": FloatDistribution(low=0.1, high=3),
"x2": FloatDistribution(low=0.1, high=3, log=True),
"x3": FloatDistribution(low=2, high=4, log=True),
},
))
# Create param importances info with inf value.
info_with_inf = _get_importances_info(
study,
evaluator=evaluator,
params=None,
target=lambda t: t.values[target_idx],
target_name=target_name,
)
# Obtained info instances should be the same between with inf and without inf,
# because the last trial whose objective value is an inf is ignored.
assert info_with_inf == info_without_inf
def _create_study_mixture_category_types() -> Study:
study = create_study()
distributions: Dict[str, BaseDistribution] = {
"param_a": CategoricalDistribution([None, "100"]),
"param_b": CategoricalDistribution([101, 102.0]),
}
study.add_trial(
create_trial(value=0.0,
params={
"param_a": None,
"param_b": 101
},
distributions=distributions))
study.add_trial(
create_trial(value=0.5,
params={
"param_a": "100",
"param_b": 102.0
},
distributions=distributions))
return study
def _create_study_with_log_scale_and_str_category_2d() -> Study:
study = create_study()
distributions = {
"param_a": FloatDistribution(1e-7, 1e-2, log=True),
"param_b": CategoricalDistribution(["100", "101"]),
}
study.add_trial(
create_trial(value=0.0,
params={
"param_a": 1e-6,
"param_b": "101"
},
distributions=distributions))
study.add_trial(
create_trial(value=1.0,
params={
"param_a": 1e-5,
"param_b": "100"
},
distributions=distributions))
return study
def _create_trial(mo_trial: "multi_objective.trial.FrozenMultiObjectiveTrial") -> FrozenTrial:
with warnings.catch_warnings():
warnings.simplefilter("ignore", ExperimentalWarning)
trial = create_trial(
state=mo_trial.state,
values=mo_trial.values,
params=mo_trial.params,
distributions=mo_trial.distributions,
user_attrs=mo_trial.user_attrs,
system_attrs=mo_trial.system_attrs,
)
return trial
def test_plot_parallel_coordinate_categorical_params() -> None:
# Test with categorical params that cannot be converted to numeral.
study_categorical_params = create_study()
study_categorical_params.add_trial(
create_trial(
value=0.0,
params={
"category_a": "preferred",
"category_b": "net"
},
distributions={
"category_a": CategoricalDistribution(("preferred", "opt")),
"category_b": CategoricalDistribution(("net", "una")),
},
))
study_categorical_params.add_trial(
create_trial(
value=2.0,
params={
"category_a": "opt",
"category_b": "una"
},
distributions={
"category_a": CategoricalDistribution(("preferred", "opt")),
"category_b": CategoricalDistribution(("net", "una")),
},
))
figure = plot_parallel_coordinate(study_categorical_params)
assert len(figure.data[0]["dimensions"]) == 3
assert figure.data[0]["dimensions"][0]["label"] == "Objective Value"
assert figure.data[0]["dimensions"][0]["range"] == (0.0, 2.0)
assert figure.data[0]["dimensions"][0]["values"] == (0.0, 2.0)
assert figure.data[0]["dimensions"][1]["label"] == "category_a"
assert figure.data[0]["dimensions"][1]["range"] == (0, 1)
assert figure.data[0]["dimensions"][1]["values"] == (0, 1)
assert figure.data[0]["dimensions"][1]["ticktext"] == ("preferred", "opt")
assert figure.data[0]["dimensions"][2]["label"] == "category_b"
assert figure.data[0]["dimensions"][2]["range"] == (0, 1)
assert figure.data[0]["dimensions"][2]["values"] == (0, 1)
assert figure.data[0]["dimensions"][2]["ticktext"] == ("net", "una")
