def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Write Shadow File", self)
self.runaction.triggered.connect(self.write_file)
self.addAction(self.runaction)
self.setFixedWidth(590)
self.setFixedHeight(180)
left_box_1 = oasysgui.widgetBox(self.controlArea, "Shadow File Selection", addSpace=True, orientation="vertical",
width=570, height=100)
gui.checkBox(left_box_1, self, 'is_automatic_run', 'Automatic Execution')
gui.separator(left_box_1, height=10)
figure_box = oasysgui.widgetBox(left_box_1, "", addSpace=True, orientation="horizontal", width=550, height=50)
self.le_beam_file_name = oasysgui.lineEdit(figure_box, self, "beam_file_name", "Shadow File Name",
labelWidth=120, valueType=str, orientation="horizontal")
self.le_beam_file_name.setFixedWidth(330)
gui.button(figure_box, self, "...", callback=self.selectFile)
gui.separator(left_box_1, height=10)
button = gui.button(self.controlArea, self, "Write Shadow File", callback=self.write_file)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def __init__(self, show_automatic_box=True):
super().__init__()
if not show_automatic_box:
self.TABS_AREA_HEIGHT = 620
else:
self.TABS_AREA_HEIGHT = 555
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
self.general_options_box = gui.widgetBox(self.controlArea,
"General Options",
addSpace=False,
orientation="horizontal")
self.general_options_box.setFixedHeight(70)
if show_automatic_box:
gui.checkBox(self.general_options_box, self, 'is_automatic_run',
'Automatic Execution')
def __init__(self):
super().__init__()
self.dataset = None
self.sample = None
self.otherdata = None
# GUI
box = gui.widgetBox(self.controlArea, "Info")
self.infoa = gui.widgetLabel(
box, 'No data on input yet, waiting to get something.')
self.infob = gui.widgetLabel(box, '')
gui.separator(self.controlArea)
self.optionsBox = gui.widgetBox(self.controlArea, "Options")
gui.spin(self.optionsBox,
self,
'proportion',
minv=10,
maxv=90,
step=10,
label='Sample Size [%]:',
callback=[self.selection, self.checkCommit])
gui.checkBox(self.optionsBox, self, 'commitOnChange',
'Commit data on selection change')
gui.button(self.optionsBox, self, "Commit", callback=self.commit)
self.optionsBox.setDisabled(True)
self.resize(100, 50)
def _setup_control_area(self) -> None:
box = gui.widgetBox(self.controlArea, "Word Scoring Methods")
for value, (n, _, tt) in SCORING_METHODS.items():
b = gui.hBox(box, margin=0)
gui.checkBox(
b,
self,
value,
label=n,
callback=self.__setting_changed,
tooltip=tt,
)
if value in ADDITIONAL_OPTIONS:
value, options = ADDITIONAL_OPTIONS[value]
gui.comboBox(
b,
self,
value,
items=options,
callback=self.__setting_changed,
)
box = gui.widgetBox(self.controlArea, "Aggregation")
gui.comboBox(
box,
self,
"aggregation",
items=[n for n in AGGREGATIONS],
callback=self.__setting_changed,
)
gui.rubber(self.controlArea)
gui.auto_send(self.buttonsArea, self, "auto_commit")
def __init__(self, show_automatic_box=True):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
self.general_options_box = gui.widgetBox(self.controlArea,
"General Options",
addSpace=True,
orientation="horizontal")
if show_automatic_box:
gui.checkBox(self.general_options_box, self, 'is_automatic_run',
'Automatic Execution')
trace = gui.checkBox(self.general_options_box, self, 'trace_shadow',
'Display Shadow Output')
trace.setVisible(False)
def test_set_checked(self):
widget = OWBaseWidget()
widget.some_option = False
cb = gui.checkBox(widget,
widget,
"some_option",
"foo",
stateWhenDisabled=False)
self.assertFalse(cb.isChecked())
cb.setEnabled(False)
cb.setChecked(True)
self.assertFalse(cb.isChecked())
cb.setEnabled(True)
self.assertTrue(cb.isChecked())
widget.some_option = True
cb = gui.checkBox(widget,
widget,
"some_option",
"foo",
stateWhenDisabled=True)
self.assertTrue(cb.isChecked())
cb.setEnabled(False)
cb.setChecked(False)
self.assertTrue(cb.isChecked())
cb.setEnabled(True)
self.assertFalse(cb.isChecked())
def build_combo(container,
master,
field_name,
label,
has_combo=True,
combo_field_name=None,
cb_items=items):
box = gui.widgetBox(container, "", orientation="horizontal")
gui.checkBox(box,
master,
"check_" + field_name,
label="" if has_combo else label)
if has_combo:
gui.comboBox(
box,
master,
"n_" +
field_name if not combo_field_name else combo_field_name,
label=label,
items=cb_items,
labelWidth=350,
sendSelectedValue=False,
orientation="horizontal")
box.setEnabled(False)
return box
def __init__(self):
super().__init__()
self.component = DummyComponent(self)
self.foo_control = gui.checkBox(self.controlArea, self, "foo", "")
self.component_foo_control = \
gui.checkBox(self.controlArea, self, "component.foo", "")
def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Write Shadow File", self)
self.runaction.triggered.connect(self.write_file)
self.addAction(self.runaction)
self.setFixedWidth(590)
self.setFixedHeight(190)
left_box_1 = oasysgui.widgetBox(self.controlArea, "Shadow File Selection", addSpace=True, orientation="vertical",
width=570, height=110)
gui.checkBox(left_box_1, self, 'is_automatic_run', 'Automatic Execution')
gui.separator(left_box_1, height=10)
figure_box = oasysgui.widgetBox(left_box_1, "", addSpace=True, orientation="horizontal", width=550, height=35)
self.le_beam_file_name = oasysgui.lineEdit(figure_box, self, "beam_file_name", "Shadow File Name",
labelWidth=120, valueType=str, orientation="horizontal")
self.le_beam_file_name.setFixedWidth(330)
gui.button(figure_box, self, "...", callback=self.selectFile)
button = gui.button(self.controlArea, self, "Write Shadow File", callback=self.write_file)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def __init__(self):
super().__init__()
# sets self.curvePoints, self.steps equidistant points from
# 1/self.steps to 1
self.updateCurvePoints()
# [start-snippet-2]
self.scoring = [
("Classification Accuracy", Orange.evaluation.scoring.CA),
("AUC", Orange.evaluation.scoring.AUC),
("Precision", Orange.evaluation.scoring.Precision),
("Recall", Orange.evaluation.scoring.Recall)
]
# [end-snippet-2]
#: input data on which to construct the learning curve
self.data = None
#: A {input_id: Learner} mapping of current learners from input channel
self.learners = OrderedDict()
#: A {input_id: List[Results]} mapping of input id to evaluation
#: results list, one for each curve point
self.results = OrderedDict()
#: A {input_id: List[float]} mapping of input id to learning curve
#: point scores
self.curves = OrderedDict()
# GUI
box = gui.widgetBox(self.controlArea, "Info")
self.infoa = gui.widgetLabel(box, 'No data on input.')
self.infob = gui.widgetLabel(box, 'No learners.')
gui.separator(self.controlArea)
box = gui.widgetBox(self.controlArea, "Evaluation Scores")
gui.comboBox(box, self, "scoringF",
items=[x[0] for x in self.scoring],
callback=self._invalidate_curves)
gui.separator(self.controlArea)
box = gui.widgetBox(self.controlArea, "Options")
gui.spin(box, self, 'folds', 2, 100, step=1,
label='Cross validation folds: ', keyboardTracking=False,
callback=lambda:
self._invalidate_results() if self.commitOnChange else None)
gui.spin(box, self, 'steps', 2, 100, step=1,
label='Learning curve points: ', keyboardTracking=False,
callback=[self.updateCurvePoints,
lambda: self._invalidate_results() if self.commitOnChange else None])
gui.checkBox(box, self, 'commitOnChange', 'Apply setting on any change')
self.commitBtn = gui.button(box, self, "Apply Setting",
callback=self._invalidate_results,
disabled=True)
gui.rubber(self.controlArea)
# table widget
self.table = gui.table(self.mainArea,
selectionMode=QTableWidget.NoSelection)
def test_set_check_state(self):
widget = OWBaseWidget()
widget.some_option = 0
cb = gui.checkBox(widget,
widget,
"some_option",
"foo",
stateWhenDisabled=Qt.Unchecked)
cb.setCheckState(Qt.Unchecked)
cb.setEnabled(False)
self.assertEqual(cb.checkState(), Qt.Unchecked)
cb.setCheckState(Qt.PartiallyChecked)
self.assertEqual(cb.checkState(), Qt.Unchecked)
cb.setEnabled(True)
self.assertEqual(cb.checkState(), Qt.PartiallyChecked)
cb.setEnabled(False)
self.assertEqual(cb.checkState(), Qt.Unchecked)
cb.setCheckState(Qt.Checked)
self.assertEqual(cb.checkState(), Qt.Unchecked)
cb.setEnabled(True)
self.assertEqual(cb.checkState(), Qt.Checked)
cb.setEnabled(False)
self.assertEqual(cb.checkState(), Qt.Unchecked)
widget.some_option = 2
cb = gui.checkBox(widget,
widget,
"some_option",
"foo",
stateWhenDisabled=Qt.PartiallyChecked)
cb.setCheckState(Qt.Unchecked)
cb.setEnabled(False)
self.assertEqual(cb.checkState(), Qt.PartiallyChecked)
cb.setCheckState(Qt.Unchecked)
self.assertEqual(cb.checkState(), Qt.PartiallyChecked)
cb.setEnabled(True)
self.assertEqual(cb.checkState(), Qt.Unchecked)
cb.setEnabled(False)
self.assertEqual(cb.checkState(), Qt.PartiallyChecked)
cb.setCheckState(Qt.Checked)
self.assertEqual(cb.checkState(), Qt.PartiallyChecked)
cb.setEnabled(True)
self.assertEqual(cb.checkState(), Qt.Checked)
cb.setEnabled(False)
self.assertEqual(cb.checkState(), Qt.PartiallyChecked)
def __init__(self):
super().__init__()
self.data = None
layout = QFormLayout()
gui.widgetBox(self.controlArea, box="Coordinates:", orientation=layout)
self.variable_model = DomainModel(order=DomainModel.MIXED,
valid_types=(ContinuousVariable, ))
args = dict(contentsLength=100,
searchable=True,
model=self.variable_model,
orientation=Qt.Horizontal)
layout.addRow("Latitude:", gui.comboBox(None, self, "attr_lat",
**args))
layout.addRow("Longitude:", gui.comboBox(None, self, "attr_lon",
**args))
layout.addWidget(
gui.checkBox(
None,
self,
"replace_original",
"Replace original coordinates",
tooltip="If unchecked, the original coordinates are retained "
"and new coordinates are added as separate variables."))
layout = QFormLayout()
gui.widgetBox(self.controlArea, "Transformation:", orientation=layout)
args["model"] = PyListModelTooltip(self.EPSG_CODES,
list(self.EPSG_CODES))
layout.addRow("From:", gui.comboBox(None, self, "from_idx", **args))
layout.addRow("To:", gui.comboBox(None, self, "to_idx", **args))
self.commit_button = gui.button(self.controlArea, self, "&Commit",
self.apply)
def __init__(self, show_automatic_box=True):
super().__init__()
geom = QApplication.desktop().availableGeometry()
if self.want_main_area:
max_width = self.MAX_WIDTH_MAIN
self.CONTROL_AREA_WIDTH = self.CONTROL_AREA_WIDTH_MAIN
else:
max_width = self.MAX_WIDTH_NO_MAIN
self.CONTROL_AREA_WIDTH = self.CONTROL_AREA_WIDTH_NO_MAIN
self.setGeometry(
QRect(round(geom.width() * 0.01), round(geom.height() * 0.01),
round(min(geom.width() * 0.95, max_width)),
round(min(geom.height() * 0.95, self.get_max_height()))))
self.setMinimumWidth(self.geometry().width() / 2)
self.setMinimumHeight(self.geometry().height() / 2)
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Expanding)
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
self.general_options_box = gui.widgetBox(self.controlArea,
"General Options",
addSpace=True,
orientation="horizontal")
if show_automatic_box:
orangegui.checkBox(self.general_options_box, self,
'is_automatic_run', 'Automatic')
gui.button(self.general_options_box,
self,
"Reset Fields",
callback=self.callResetSettings)
gui.button(self.general_options_box,
self,
"Show Available Parameters",
callback=self.show_available_parameters)
def __init__(self, show_automatic_box=True):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(QRect(round(geom.width()*0.05),
round(geom.height()*0.05),
round(min(geom.width()*0.98, self.MAX_WIDTH)),
round(min(geom.height()*0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
self.general_options_box = gui.widgetBox(self.controlArea, "General Options", addSpace=True, orientation="horizontal")
if show_automatic_box :
gui.checkBox(self.general_options_box, self, 'is_automatic_run', 'Automatic Execution')
trace = gui.checkBox(self.general_options_box, self, 'trace_shadow', 'Display Shadow Output')
trace.setVisible(False)
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.option = False
self.autocommit = False
self.checkbox = gui.checkBox(self,
self,
"option",
"foo",
callback=self.apply.deferred)
self.commit_button = gui.auto_commit(self,
self,
'autocommit',
'Commit',
commit=self.apply)
def __init__(self):
super().__init__()
# sets self.curvePoints, self.steps equidistant points from
# 1/self.steps to 1
self.updateCurvePoints()
self.scoring = [("Classification Accuracy",
Orange.evaluation.scoring.CA),
("AUC", Orange.evaluation.scoring.AUC),
("Precision", Orange.evaluation.scoring.Precision),
("Recall", Orange.evaluation.scoring.Recall)]
#: Input data on which to construct the learning curve
self.data = None
#: Optional test data
self.testdata = None
#: LearnerData for each learner input
self.learners: List[LearnerData] = []
# [start-snippet-3]
#: The current evaluating task (if any)
self._task = None # type: Optional[Task]
#: An executor we use to submit learner evaluations into a thread pool
self._executor = concurrent.futures.ThreadPoolExecutor()
# [end-snippet-3]
# GUI
box = gui.widgetBox(self.controlArea, "Info")
self.infoa = gui.widgetLabel(box, 'No data on input.')
self.infob = gui.widgetLabel(box, 'No learners.')
gui.separator(self.controlArea)
box = gui.widgetBox(self.controlArea, "Evaluation Scores")
gui.comboBox(box,
self,
"scoringF",
items=[x[0] for x in self.scoring],
callback=self._invalidate_curves)
gui.separator(self.controlArea)
box = gui.widgetBox(self.controlArea, "Options")
gui.spin(box,
self,
'folds',
2,
100,
step=1,
label='Cross validation folds: ',
keyboardTracking=False,
callback=lambda: self._invalidate_results()
if self.commitOnChange else None)
gui.spin(box,
self,
'steps',
2,
100,
step=1,
label='Learning curve points: ',
keyboardTracking=False,
callback=[
self.updateCurvePoints,
lambda: self._invalidate_results()
if self.commitOnChange else None
])
gui.checkBox(box, self, 'commitOnChange',
'Apply setting on any change')
self.commitBtn = gui.button(box,
self,
"Apply Setting",
callback=self._invalidate_results,
disabled=True)
gui.rubber(self.controlArea)
# table widget
self.table = gui.table(self.mainArea,
selectionMode=QTableWidget.NoSelection)
def build_gui(self):
runaction = OWAction("Find Best Focus Position", self)
runaction.triggered.connect(self.do_best_focus_calculation)
self.addAction(runaction)
runaction = OWAction("Interrupt Best Focus Calculation", self)
runaction.triggered.connect(self.stop_best_focus_calculation)
self.addAction(runaction)
self.view_type = 1
self.button_box.setVisible(False)
self.tabs_setting = oasysgui.tabWidget(self.controlArea)
self.tabs_setting.setFixedHeight(self.TABS_AREA_HEIGHT)
self.tabs_setting.setFixedWidth(self.CONTROL_AREA_WIDTH-5)
self.tab_bas = oasysgui.createTabPage(self.tabs_setting, "Detector Setting")
self.tab_pro = oasysgui.createTabPage(self.tabs_setting, "Advanced Setting")
main_box = oasysgui.widgetBox(self.tab_bas, "Detector Parameters", orientation="vertical", width=self.CONTROL_AREA_WIDTH-20)
oasysgui.lineEdit(main_box, self, "detector_size", "Detector Size [" + u"\u03BC" + "m]", labelWidth=240, valueType=float, orientation="horizontal")
gui.separator(main_box)
gui.comboBox(main_box, self, "calculation_type", label="Numeric Integration",
items=["Automatic Number of Points", "User Defined Number of Points"], labelWidth=140,
callback=self.set_CalculationType, sendSelectedValue=False, orientation="horizontal")
self.detector_box = oasysgui.widgetBox(main_box, "", orientation="vertical", width=self.CONTROL_AREA_WIDTH-40, height=30)
le_calculated_number_of_points = oasysgui.lineEdit(self.detector_box, self, "calculated_number_of_points", "Calculated Number of Points", labelWidth=240, valueType=float, orientation="horizontal")
le_calculated_number_of_points.setReadOnly(True)
font = QFont(le_calculated_number_of_points.font())
font.setBold(True)
le_calculated_number_of_points.setFont(font)
palette = QPalette(le_calculated_number_of_points.palette())
palette.setColor(QPalette.Text, QColor('dark blue'))
palette.setColor(QPalette.Base, QColor(243, 240, 140))
le_calculated_number_of_points.setPalette(palette)
self.number_box = oasysgui.widgetBox(main_box, "", orientation="vertical", width=self.CONTROL_AREA_WIDTH-40, height=30)
oasysgui.lineEdit(self.number_box, self, "number_of_points", "Number of Points", labelWidth=240, valueType=int, orientation="horizontal")
self.set_CalculationType()
self.le_oe_f2 = oasysgui.lineEdit(main_box, self, "oe_f2", "O.E. F2", labelWidth=240, valueType=float, orientation="horizontal")
self.le_oe_f2.setReadOnly(True)
font = QFont(self.le_oe_f2.font())
font.setBold(True)
self.le_oe_f2.setFont(font)
palette = QPalette(self.le_oe_f2.palette())
palette.setColor(QPalette.Text, QColor('dark blue'))
palette.setColor(QPalette.Base, QColor(243, 240, 140))
self.le_oe_f2.setPalette(palette)
self.le_defocus_sweep = oasysgui.lineEdit(main_box, self, "defocus_sweep", "Defocus sweep", labelWidth=240, valueType=float, orientation="horizontal")
gui.button(main_box, self, "Compute", callback=self.compute, height=35)
best_focus_box = oasysgui.widgetBox(self.tab_bas, "Best Focus Calculation", orientation="vertical", width=self.CONTROL_AREA_WIDTH-20)
self.le_defocus_start = oasysgui.lineEdit(best_focus_box, self, "defocus_start", "Defocus sweep start", labelWidth=240, valueType=float, orientation="horizontal")
self.le_defocus_stop = oasysgui.lineEdit(best_focus_box, self, "defocus_stop", "Defocus sweep stop", labelWidth=240, valueType=float, orientation="horizontal")
self.le_defocus_step = oasysgui.lineEdit(best_focus_box, self, "defocus_step", "Defocus sweep step", labelWidth=240, valueType=float, orientation="horizontal")
gui.separator(best_focus_box, height=5)
gui.checkBox(best_focus_box, self, "show_animation", "Show animation during calculation")
gui.separator(best_focus_box, height=5)
button_box = oasysgui.widgetBox(best_focus_box, "", orientation="horizontal", width=self.CONTROL_AREA_WIDTH-40)
gui.button(button_box, self, "Find Best Focus Position", callback=self.do_best_focus_calculation, height=35)
stop_button = gui.button(button_box, self, "Interrupt", callback=self.stop_best_focus_calculation, height=35)
font = QFont(stop_button.font())
font.setBold(True)
stop_button.setFont(font)
palette = QPalette(stop_button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('red'))
stop_button.setPalette(palette) # assign new palette
self.save_button = gui.button(best_focus_box, self, "Save Best Focus Calculation Complete Results", callback=self.save_best_focus_results, height=35)
self.save_button.setEnabled(False)
parallel_box = oasysgui.widgetBox(self.tab_pro, "Parallel Computing", orientation="vertical", width=self.CONTROL_AREA_WIDTH-20)
gui.comboBox(parallel_box, self, "use_multipool", label="Use Parallel Processing",
items=["No", "Yes"], labelWidth=240,
callback=self.set_Multipool, sendSelectedValue=False, orientation="horizontal")
self.use_multipool_box = oasysgui.widgetBox(parallel_box, "", addSpace=True, orientation="vertical", height=30, width=self.CONTROL_AREA_WIDTH-40)
self.use_multipool_box_empty = oasysgui.widgetBox(parallel_box, "", addSpace=True, orientation="vertical", height=30, width=self.CONTROL_AREA_WIDTH-40)
oasysgui.lineEdit(self.use_multipool_box, self, "n_pools", "Nr. Parallel Processes", labelWidth=240, valueType=int, orientation="horizontal")
self.set_Multipool()
self.best_focus_slider = None
def build_mirror_specific_gui(self, container_box):
self.tab_best = oasysgui.createTabPage(self.tabs_setting,
"Find Best Focus")
best_focus_box = oasysgui.widgetBox(self.tab_best,
"",
orientation="vertical",
width=self.CONTROL_AREA_WIDTH - 20)
bestFocusLabel = "Use for: \n* best focus metrics (HEW, position)\n* intensity profile at best focus position\n* high computational speed\n"
gui.label(best_focus_box,
self,
bestFocusLabel,
labelWidth=None,
box=None,
orientation=2)
self.le_defocus_start = oasysgui.lineEdit(best_focus_box,
self,
"defocus_start",
"Start [mm]",
labelWidth=240,
valueType=float,
orientation="horizontal")
self.le_defocus_stop = oasysgui.lineEdit(best_focus_box,
self,
"defocus_stop",
"Stop [mm]",
labelWidth=240,
valueType=float,
orientation="horizontal")
# self.le_defocus_step = oasysgui.lineEdit(best_focus_box, self, "defocus_step", "Step [mm]", labelWidth=240, valueType=float, orientation="horizontal")
self.le_max_iter = oasysgui.lineEdit(best_focus_box,
self,
"max_iter",
"Max. iterations",
labelWidth=240,
valueType=int,
orientation="horizontal")
# gui.separator(best_focus_box, height=5)
# gui.checkBox(best_focus_box, self, "show_animation", "Show animation during calculation")
gui.separator(best_focus_box, height=5)
button_box = oasysgui.widgetBox(best_focus_box,
"",
orientation="horizontal",
width=self.CONTROL_AREA_WIDTH - 20)
gui.button(button_box,
self,
"Scan Start",
callback=self.do_find_focus_calculation,
height=35)
stop_button = gui.button(button_box,
self,
"Interrupt",
callback=self.stop_best_focus_calculation,
height=35)
font = QFont(stop_button.font())
font.setBold(True)
stop_button.setFont(font)
palette = QPalette(stop_button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('red'))
stop_button.setPalette(palette) # assign new palette
self.save_button = gui.button(best_focus_box,
self,
"Save Complete Calculation Results",
callback=self.save_best_focus_results,
height=35)
self.save_button.setEnabled(False)
# PROBLEM HERE! STR AND FLOAT!
le_BD = oasysgui.lineEdit(best_focus_box,
self,
"ActualBestDefocus",
"Best focus at [m]",
labelWidth=220,
valueType=float,
orientation="horizontal")
le_BD.setReadOnly(True)
font = QFont(le_BD.font())
# font.setBold(True)
le_BD.setFont(font)
palette = QPalette(le_BD.palette())
palette.setColor(QPalette.Text, QColor('grey'))
palette.setColor(QPalette.Base, QColor(243, 240, 140))
le_BD.setPalette(palette)
le_HEW = oasysgui.lineEdit(best_focus_box,
self,
"ActualBestHew",
"HEW at best focus [" + u"\u03BC" + "m]",
labelWidth=220,
valueType=float,
orientation="horizontal")
le_HEW.setReadOnly(True)
font = QFont(le_HEW.font())
# font.setBold(True)
le_HEW.setFont(font)
palette = QPalette(le_HEW.palette())
palette.setColor(QPalette.Text, QColor('grey'))
palette.setColor(QPalette.Base, QColor(243, 240, 140))
le_HEW.setPalette(palette)
self.best_focus_slider = None
self.tab_sweep = oasysgui.createTabPage(self.tabs_setting,
"Focal Scan")
focus_sweep_box = oasysgui.widgetBox(self.tab_sweep,
"",
orientation="vertical",
width=self.CONTROL_AREA_WIDTH -
20)
focusSweepLabel = "Use for: \n* a complete plot of the spot size through the focal plane\n* a collection of the intensity profiles\n* below-average computational performance\n"
gui.label(focus_sweep_box,
self,
focusSweepLabel,
labelWidth=None,
box=None,
orientation=2)
self.le_defocus_start = oasysgui.lineEdit(focus_sweep_box,
self,
"defocus_start",
"Lower limit [mm]",
labelWidth=240,
valueType=float,
orientation="horizontal")
self.le_defocus_stop = oasysgui.lineEdit(focus_sweep_box,
self,
"defocus_stop",
"Upper limit [mm]",
labelWidth=240,
valueType=float,
orientation="horizontal")
self.le_defocus_Nsteps = oasysgui.lineEdit(focus_sweep_box,
self,
"defocus_Nsteps",
"No. of steps",
labelWidth=240,
valueType=int,
orientation="horizontal",
callbackOnType=True,
callback=self.get_StepSize)
le_defocus_step = oasysgui.lineEdit(focus_sweep_box,
self,
"defocus_step",
"Step [mm]",
labelWidth=240,
valueType=float,
orientation="horizontal")
le_defocus_step.setReadOnly(True)
font = QFont(le_defocus_step.font())
le_defocus_step.setFont(font)
palette = QPalette(le_defocus_step.palette())
palette.setColor(QPalette.Text, QColor('grey'))
palette.setColor(QPalette.Base, QColor(243, 240, 140))
le_defocus_step.setPalette(palette)
gui.separator(focus_sweep_box, height=5)
gui.checkBox(focus_sweep_box, self, "show_animation",
"Show animation during calculation")
gui.separator(focus_sweep_box, height=5)
button_box = oasysgui.widgetBox(focus_sweep_box,
"",
orientation="horizontal",
width=self.CONTROL_AREA_WIDTH - 20)
gui.button(button_box,
self,
"Scan Start",
callback=self.do_focus_sweep_calculation,
height=35)
stop_button = gui.button(button_box,
self,
"Interrupt",
callback=self.stop_best_focus_calculation,
height=35)
font = QFont(stop_button.font())
font.setBold(True)
stop_button.setFont(font)
palette = QPalette(stop_button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('red'))
stop_button.setPalette(palette) # assign new palette
self.save_button = gui.button(focus_sweep_box,
self,
"Save Complete Calculation Results",
callback=self.save_best_focus_results,
height=35)
self.save_button.setEnabled(False)
self.best_focus_slider = None
def build_positioning_directive_box(self, container_box, width, element_type=ElementType.SOURCE):
box = oasysgui.widgetBox(container_box, "Positioning Directives", orientation="vertical", width=width)
box_combos = oasysgui.widgetBox(box, "", orientation="vertical", width=width-20)
box_Distance = oasysgui.widgetBox(box, "", orientation="horizontal", width=width-20)
box_Distance_check = oasysgui.widgetBox(box_Distance, "", orientation="horizontal", width=20)
box_Distance_value = oasysgui.widgetBox(box_Distance, "", orientation="horizontal")
box_XYCentre = oasysgui.widgetBox(box, "", orientation="horizontal", width=width-20)
box_XYCentre_check = oasysgui.widgetBox(box_XYCentre, "", orientation="horizontal", width=20)
box_XYCentre_value = oasysgui.widgetBox(box_XYCentre, "", orientation="vertical")
'''
box_GrazingAngle = oasysgui.widgetBox(box, "", orientation="horizontal", width=width-20)
box_GrazingAngle_check = oasysgui.widgetBox(box_GrazingAngle, "", orientation="horizontal", width=20)
box_GrazingAngle_value = oasysgui.widgetBox(box_GrazingAngle, "", orientation="horizontal")
box_Angle = oasysgui.widgetBox(box, "", orientation="horizontal", width=width-20)
box_Angle_check = oasysgui.widgetBox(box_Angle, "", orientation="horizontal", width=20)
box_Angle_value = oasysgui.widgetBox(box_Angle, "", orientation="horizontal")
def set_WhichAngle():
box_GrazingAngle.setVisible(getattr(self, "WhichAngle") == positioning_directives_which_angle[0])
box_Angle.setVisible(getattr(self, "WhichAngle") != positioning_directives_which_angle[0])
'''
def set_Distance_checked():
box_Distance_value.setEnabled(getattr(self, "Distance_checked") == 1)
def set_XYCentre_checked():
box_XYCentre_value.setEnabled(getattr(self, "XYCentre_checked") == 1)
'''
def set_GrazingAngle_checked():
box_GrazingAngle_value.setEnabled(getattr(self, "GrazingAngle_checked") == 1)
def set_Angle_checked():
box_Angle_value.setEnabled(getattr(self, "Angle_checked") == 1)
'''
def set_positioning_directives():
pass
#set_WhichAngle()
box_what = oasysgui.widgetBox(box_combos, "", orientation="horizontal")
gui.label(box_what, self, label=" ", labelWidth=20)
gui.comboBox(box_what, self, "What", label="",
items=positioning_directives_what,
sendSelectedValue=True, orientation="horizontal", callback=set_positioning_directives)
gui.label(box_what, self, label=" of this O.E.", labelWidth=80)
box_where = oasysgui.widgetBox(box_combos, "", orientation="horizontal")
gui.label(box_where, self, label="at", labelWidth=20)
gui.comboBox(box_where, self, "Where", label="",
items=positioning_directives_where,
sendSelectedValue=True, orientation="horizontal", callback=set_positioning_directives)
gui.label(box_where, self, label=" of", labelWidth=80)
box_refer_to = oasysgui.widgetBox(box_combos, "", orientation="horizontal")
gui.label(box_refer_to, self, label=" ", labelWidth=20)
gui.comboBox(box_refer_to, self, "ReferTo", label="",
items=positioning_directives_refer_to,
sendSelectedValue=True, orientation="horizontal", callback=set_positioning_directives)
gui.label(box_refer_to, self, label=" O.E.", labelWidth=80)
'''
gui.comboBox(box_combos, self, "WhichAngle", label="Type Of Angle",
items=positioning_directives_which_angle, labelWidth=box_combos.width()-150,
sendSelectedValue=True, orientation="horizontal", callback=set_WhichAngle)
'''
gui.separator(box_combos)
gui.checkBox(box_Distance_check, self, "Distance_checked", "", callback=set_Distance_checked)
gui.checkBox(box_XYCentre_check, self, "XYCentre_checked", "", callback=set_XYCentre_checked)
'''
gui.checkBox(box_GrazingAngle_check, self, "GrazingAngle_checked", "", callback=set_GrazingAngle_checked)
gui.checkBox(box_Angle_check, self, "Angle_checked", "", callback=set_Angle_checked)
'''
set_Distance_checked()
set_XYCentre_checked()
'''
set_Angle_checked()
set_GrazingAngle_checked()
'''
self.le_Distance = oasysgui.lineEdit(box_Distance_value, self, "Distance", "Distance", labelWidth=200, valueType=float, orientation="horizontal")
self.le_XCentre = oasysgui.lineEdit(box_XYCentre_value, self, "XCentre", "X Centre", labelWidth=200, valueType=float, orientation="horizontal")
self.le_YCentre = oasysgui.lineEdit(box_XYCentre_value, self, "YCentre", "Y Centre", labelWidth=200, valueType=float, orientation="horizontal")
'''
oasysgui.lineEdit(box_Angle_value, self, "Angle", "Angle [deg]", labelWidth=200, valueType=float, orientation="horizontal")
oasysgui.lineEdit(box_GrazingAngle_value, self, "GrazingAngle", "Grazing Angle [deg]", labelWidth=200, valueType=float, orientation="horizontal")
'''
set_positioning_directives()
def _setup_control_area(self) -> None:
box = gui.widgetBox(self.controlArea, "Word Scoring Methods")
for value, (n, _, tt) in SCORING_METHODS.items():
b = gui.hBox(box, margin=0)
gui.checkBox(
b,
self,
value,
label=n,
callback=self.__setting_changed,
tooltip=tt,
)
if value in ADDITIONAL_OPTIONS:
value, options = ADDITIONAL_OPTIONS[value]
gui.comboBox(
b,
self,
value,
items=options,
callback=self.__setting_changed,
)
box = gui.widgetBox(self.controlArea, "Aggregation")
gui.comboBox(
box,
self,
"aggregation",
items=[n for n in AGGREGATIONS],
callback=self.__setting_changed,
)
gui.rubber(self.controlArea)
# select words box
box = gui.vBox(self.buttonsArea, "Select Documents")
grid = QGridLayout()
grid.setContentsMargins(0, 0, 0, 0)
self._sel_method_buttons = QButtonGroup()
for method, label in enumerate(SelectionMethods.ITEMS):
button = QRadioButton(label)
button.setChecked(method == self.sel_method)
grid.addWidget(button, method, 0)
self._sel_method_buttons.addButton(button, method)
self._sel_method_buttons.buttonClicked[int].connect(
self.__set_selection_method)
spin = gui.spin(
box,
self,
"n_selected",
1,
999,
addToLayout=False,
callback=lambda: self.__set_selection_method(SelectionMethods.
N_BEST),
)
grid.addWidget(spin, 3, 1)
box.layout().addLayout(grid)
# autocommit
gui.auto_send(self.buttonsArea, self, "auto_commit")
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "GID_SL Request Form", addSpace=False, orientation="vertical",
width=500, height=680)
self.central_tabs = oasysgui.tabWidget(left_box_1)
tab_template = oasysgui.createTabPage(self.central_tabs, "Template Options")
tab_input = oasysgui.createTabPage(self.central_tabs, "Input Options")
left_box_1_1 = oasysgui.widgetBox(tab_template, "", addSpace=False, orientation="vertical", width=480, height=670)
gui.separator(left_box_1_1)
gui.comboBox(left_box_1_1, self, "template_type", label="Template Type", labelWidth=100,
items=["Simplified (coplanar geometries only)", "Full"],
callback=self.set_TemplateType, sendSelectedValue=False, orientation="horizontal")
self.simplified_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.simplified_box, self, "simplified_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Symmetric Bragg diffraction at Bragg angle of 90 degrees (\"back diffraction\")",
"Energy scanning of symmetric Bragg diffraction peaks"],
callback=self.set_SimplifiedForm)
self.full_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.full_box, self, "full_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Coplanar extremely asymmetric diffraction of synchrotron radiation",
"Grazing incidence (\"surface\") diffraction from perfect crystals",
"Grazing incidence (\"surface\") diffraction from multilayers in the scheme\nwith position sensitive detector (PSD)",
"Non-coplanar Bragg-Laue diffraction from crystals with a few degrees\nsurface miscut"],
callback=self.set_FullForm)
# -------------------------------------------------------------
# -------------------------------------------------------------
# -------------------------------------------------------------
gui.separator(tab_input)
left_box_2 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(left_box_2_1, self, "xway", label="X-rays specified by",
items=["Wavelength (Å)", "Energy (keV)", "Bragg angle (deg)", "X-ray line"],
callback=self.set_xway, sendSelectedValue=False, orientation="horizontal")
self.box_wave = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
oasysgui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
gui.comboBox(left_box_2_1, self, "ipol", label="Polarization",
items=["Sigma", "Pi", "Mixed"], sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
left_box_3 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_3_1 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
XRayServerGui.combobox_text(left_box_3_1, self, "code", label="Crystal", labelWidth=40,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button(left_box_3_1, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
gui.comboBox(left_box_3_1, self, "df1df2", label=" ", labelWidth=20,
items=["Auto DB for f\', f\'\'",
"X0h data (0.5-2.5 A)",
"Henke (0.4-1200 A)",
"Brennan (0.02-400 A)"],
sendSelectedValue=False, orientation="horizontal")
left_box_3_2 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(left_box_3_2, self, "sigma", label="Sigma", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3_2, self, "w0", label="A W0", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3_2, self, "wh", label=" Wh", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
left_box_4 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470)
left_box_4_1 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=240)
oasysgui.lineEdit(left_box_4_1, self, "i1", label="Bragg Reflection", labelWidth=97, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1, self, "i2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1, self, "i3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
left_box_4_2 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=228)
oasysgui.lineEdit(left_box_4_2, self, "daa", label=" Substrate da/a", labelWidth=135, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
# -------------------------------------------------------------
self.simplified_input_box = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470, height=290)
gui.comboBox(self.simplified_input_box, self, "igie", label="Geometry specified by",
items=["angle of Bragg planes to surface ('+' for g0>gh)",
"incidence angle of K0",
"exit angle of Kh",
"asymmetry factor beta=g0/gh"],
callback=self.set_igie_s, sendSelectedValue=False, orientation="horizontal")
simplified_input_box_1 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(simplified_input_box_1, self, "fcentre", label="Value", labelWidth=280, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_s = gui.comboBox(simplified_input_box_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_s()
simplified_input_box_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(simplified_input_box_2, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(simplified_input_box_2, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
self.simplified_input_box_scan_1_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_1_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(self.simplified_input_box_scan_1_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_1_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.checkBox(self.simplified_input_box_scan_1_2, self, "invert", "Invert axis", labelWidth=190)
gui.comboBox(self.simplified_input_box_scan_1_2, self, "column", label="Plot argument", labelWidth=100,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
self.simplified_input_box_scan_2_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
self.unis_combo_s = gui.comboBox(self.simplified_input_box_scan_2_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad",
"eV"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(self.simplified_input_box_scan_2_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_2_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_2_2, self, "axis", label="Scan Type", labelWidth=290,
items=["[k0 x h]",
"Energy (eV)",
"Energy (eV), no X0h recalc"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_s)
self.set_scan_type_s()
# -------------------------------------------------------------
# -------------------------------------------------------------
self.full_input_box = oasysgui.widgetBox(tab_input, "", addSpace=True, orientation="vertical", width=470, height=290)
gui.comboBox(self.full_input_box, self, "igie", label="Geom. by", labelWidth=60,
items=["[1]. Surface orientation & incidence angle of K0",
"[2]. Surface orientation & exit angle of Kh",
"[3]. Surface orientation & condition of coplanar grazing incidence",
"[4]. Surface orientation & condition of coplanar grazing exit",
"[5]. Surface orientation & condition of symmetric Bragg case",
"[6]. Condition of coplanar reflection & angle of Bragg planes to surface",
"[7]. Condition of coplanar reflection & incidence angle of K0",
"[8]. Condition of coplanar reflection & exit angle of Kh",
"[9]. Condition of coplanar reflection & asymmetry factor beta=g0/gh"],
callback=self.set_igie_f, sendSelectedValue=False, orientation="horizontal")
gui.label(self.full_input_box, self, "-- Geom. parameter ([1,7]=incidence angle, [2,8]=exit angle, [6]=Bragg planes")
full_input_box_1 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_1_1 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=470)
self.le_fcentre = oasysgui.lineEdit(full_input_box_1_1, self, "fcentre", label=" angle, [9]=g0/gh)",
labelWidth=250, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_f = gui.comboBox(full_input_box_1_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_f()
full_input_box_1_2 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(full_input_box_1_2, self, "n1", label="-- Surface plane ([1-5])", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_1_2, self, "n2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_1_2, self, "n3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="horizontal", width=470)
full_input_box_2_1 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(full_input_box_2_1, self, "m1", label="Miscut direction", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_2_1, self, "m2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_2_1, self, "m3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2_2 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal")
oasysgui.lineEdit(full_input_box_2_2, self, "miscut", label="Miscut angle", addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_2_2, self, "unim", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
full_input_box_3 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_3_1 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_3_1, self, "axis", label="Scan Type", labelWidth=190,
items=["Surface normal (N_surface)",
"[k0 x N_surface]",
"Reciprocal latt.vector (h)",
"[k0 x h]",
"Other axis",
"Takeoff spectrum (PSD)"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_f)
gui.checkBox(full_input_box_3_1, self, "invert", "Invert axis", labelWidth=90)
full_input_box_3_2 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
self.le_a1 = oasysgui.lineEdit(full_input_box_3_2, self, "a1", label="Indices, if other scan axis", labelWidth=290, addSpace=False, valueType=int, orientation="horizontal")
self.le_a2 = oasysgui.lineEdit(full_input_box_3_2, self, "a2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.le_a3 = oasysgui.lineEdit(full_input_box_3_2, self, "a3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.set_scan_type_f()
full_input_box_5 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_5_1 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(full_input_box_5_1, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(full_input_box_5_1, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_5_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(full_input_box_5_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_5_2 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_5_2, self, "column", label="Plot argument", labelWidth=290,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
box_alpha = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=280)
self.le_alphamax = oasysgui.lineEdit(box_alpha, self, "alphamax", label="Approximations: alpha_max", labelWidth=170, addSpace=False, valueType=float, orientation="horizontal")
gui.label(box_alpha, self, "*|xh|")
gui.separator(tab_input)
# -------------------------------------------------------------
box_top = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
box_top_0 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_0_1 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="vertical", width=100)
gui.label(box_top_0_1, self, "Top layer profile\n(optional):")
button = gui.button(box_top_0_1, self, "? (sintax)", callback=self.help_profile)
button.setFixedWidth(90)
box_top_0_2 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="horizontal", width=360)
self.profile_area = QtWidgets.QTextEdit()
self.profile_area.setStyleSheet("background-color: white;")
self.profile_area.setMaximumHeight(110)
self.profile_area.setMaximumWidth(360)
box_top_0_2.layout().addWidget(self.profile_area)
box_top_labels = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_labels_1 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=100)
gui.label(box_top_labels_1, self, "Available Codes:")
box_top_labels_2 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=360)
gui.label(box_top_labels_2, self, "Crystals")
gui.label(box_top_labels_2, self, "Non-Crystals")
gui.label(box_top_labels_2, self, "Elements")
box_top_1 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=100)
box_top_1_2 = oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=360)
crystals_area = QtWidgets.QTextEdit()
crystals_area.setStyleSheet("background-color: white;")
crystals_area.setMaximumHeight(100)
crystals_area.setMaximumWidth(120)
crystals_area.setText("\n".join(ListUtility.get_list("crystals")))
crystals_area.setReadOnly(True)
non_crystals_area = QtWidgets.QTextEdit()
non_crystals_area.setStyleSheet("background-color: white;")
non_crystals_area.setMaximumHeight(100)
non_crystals_area.setMaximumWidth(120)
non_crystals_area.setText("\n".join(ListUtility.get_list("amorphous")))
non_crystals_area.setReadOnly(True)
elements_area = QtWidgets.QTextEdit()
elements_area.setStyleSheet("background-color: white;")
elements_area.setMaximumHeight(100)
elements_area.setMaximumWidth(120)
elements_area.setText("\n".join(ListUtility.get_list("atoms")))
elements_area.setReadOnly(True)
box_top_1_2.layout().addWidget(crystals_area)
box_top_1_2.layout().addWidget(non_crystals_area)
box_top_1_2.layout().addWidget(elements_area)
# -----------------------------------------------------------
button = gui.button(tab_input, self, "Submit Query!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.set_TemplateType(change_values=False)
self.profile_area.textChanged.connect(self.set_profile)
self.le_alphamax.focusOutEvent = self.alphamax_focusOutEvent
self.alphamax_focusOutEvent(None)
gui.rubber(self.mainArea)
def __init__(self):
self.setFixedWidth(590)
self.setFixedHeight(550)
left_box_1 = oasysgui.widgetBox(self.controlArea, "CCD Image", addSpace=True, orientation="vertical")
gui.comboBox(left_box_1, self, "is_textual", label="Image Type", labelWidth=250, items=["JPEG/PNG", "Textual"], sendSelectedValue=False, orientation="horizontal", callback=self.setTextual)
########################################
self.select_file_box_1 = oasysgui.widgetBox(left_box_1, "Textual Image Parameters", addSpace=True, orientation="horizontal", height=250)
self.le_image_txt_file_name = oasysgui.lineEdit(self.select_file_box_1, self, "image_file_name", "Image File Name", labelWidth=120, valueType=str, orientation="horizontal")
self.le_image_txt_file_name.setFixedWidth(300)
gui.button(self.select_file_box_1, self, "...", callback=self.selectTxtFile)
self.select_file_box_2 = oasysgui.widgetBox(left_box_1, "Image Parameters", addSpace=True, orientation="vertical", height=250)
select_file_box_2_int = oasysgui.widgetBox(self.select_file_box_2, "", addSpace=True, orientation="horizontal")
self.le_image_file_name = oasysgui.lineEdit(select_file_box_2_int, self, "image_file_name", "Image File Name", labelWidth=120, valueType=str, orientation="horizontal")
self.le_image_file_name.setFixedWidth(300)
gui.button(select_file_box_2_int, self, "...", callback=self.selectFile)
figure_box = oasysgui.widgetBox(self.select_file_box_2, "Preview", addSpace=True, orientation="vertical", width=350, height=180)
self.preview_box = QtGui.QLabel("")
self.preview_box.setFixedHeight(100)
figure_box.layout().addWidget(self.preview_box)
le = oasysgui.lineEdit(figure_box, self, "number_of_x_pixels", "Number of x Pixels", labelWidth=200, valueType=int, orientation="horizontal")
le.setReadOnly(True)
font = QtGui.QFont(le.font())
font.setBold(True)
le.setFont(font)
palette = QtGui.QPalette(le.palette()) # make a copy of the palette
palette.setColor(QtGui.QPalette.Text, QtGui.QColor('dark blue'))
palette.setColor(QtGui.QPalette.Base, QtGui.QColor(243, 240, 160))
le.setPalette(palette)
le = oasysgui.lineEdit(figure_box, self, "number_of_z_pixels", "Number of z Pixels", labelWidth=200, valueType=int, orientation="horizontal")
le.setReadOnly(True)
font = QtGui.QFont(le.font())
font.setBold(True)
le.setFont(font)
palette = QtGui.QPalette(le.palette()) # make a copy of the palette
palette.setColor(QtGui.QPalette.Text, QtGui.QColor('dark blue'))
palette.setColor(QtGui.QPalette.Base, QtGui.QColor(243, 240, 160))
le.setPalette(palette)
########################################
self.setTextual()
self.loadImage()
oasysgui.lineEdit(left_box_1, self, "pixel_size", "Pixel Size [um]", labelWidth=200, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "number_of_x_bins", "Number of Bin per Pixel [x]", labelWidth=200, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "number_of_z_bins", "Number of Bin per Pixel [z]", labelWidth=200, valueType=int, orientation="horizontal")
gui.checkBox(left_box_1, self, "flip_vertically", "Flip Vertically")
gui.checkBox(left_box_1, self, "flip_horizontally", "Flip Horizontally")
gui.separator(self.controlArea)
button = gui.button(self.controlArea, self, "Convert To Beam", callback=self.convertToBeam)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def __init__(self, show_automatic_box=True, show_general_option_box=True):
super().__init__() # show_automatic_box=show_automatic_box)
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
self.general_options_box = gui.widgetBox(self.controlArea,
"General Options",
addSpace=True,
orientation="horizontal")
self.general_options_box.setVisible(show_general_option_box)
if show_automatic_box:
gui.checkBox(self.general_options_box, self, 'is_automatic_run',
'Automatic Execution')
#
#
#
button_box = oasysgui.widgetBox(self.controlArea,
"",
addSpace=False,
orientation="horizontal")
button = gui.button(button_box,
self,
"Refresh Script",
callback=self.refresh_script)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
gui.separator(self.controlArea)
gen_box = oasysgui.widgetBox(self.controlArea,
"Scan modes",
addSpace=False,
orientation="vertical",
width=self.CONTROL_AREA_WIDTH - 5)
oasysgui.lineEdit(gen_box,
self,
"mode_index_max",
"Max mode (index)",
labelWidth=150,
valueType=int,
orientation="horizontal",
callback=self.refresh_script)
gen_box = oasysgui.widgetBox(self.controlArea,
"Script file",
addSpace=False,
orientation="vertical",
width=self.CONTROL_AREA_WIDTH - 5)
gui.comboBox(gen_box,
self,
"script_file_flag",
label="write file with script",
items=["No", "Yes"],
labelWidth=300,
sendSelectedValue=False,
orientation="horizontal")
box1 = gui.widgetBox(gen_box, orientation="horizontal")
oasysgui.lineEdit(box1,
self,
"script_file_name",
"Script File Name",
labelWidth=150,
valueType=str,
orientation="horizontal")
self.show_at("self.script_file_flag == 1", box1)
gen_box = oasysgui.widgetBox(self.controlArea,
"Output Graph and Data",
addSpace=False,
orientation="vertical",
width=self.CONTROL_AREA_WIDTH - 5)
gui.comboBox(gen_box,
self,
"show_graph_flag",
label="show plots",
items=["No", "Yes"],
labelWidth=300,
sendSelectedValue=False,
orientation="horizontal")
gui.comboBox(gen_box,
self,
"graph_file_flag",
label="dump plots to file",
items=["No", "Yes [png]", "Yes [pdf]"],
labelWidth=300,
sendSelectedValue=False,
orientation="horizontal")
gui.comboBox(gen_box,
self,
"data_file_flag",
label="dump plot data to file",
items=["No", "Yes"],
labelWidth=300,
sendSelectedValue=False,
orientation="horizontal")
box3 = gui.widgetBox(gen_box, orientation="horizontal")
oasysgui.lineEdit(box3,
self,
"root_file_name",
"Data File Name Root",
labelWidth=150,
valueType=str,
orientation="horizontal")
self.show_at("self.graph_file_flag > 0 or self.data_file_flag == 1",
box3)
tabs_setting = oasysgui.tabWidget(self.mainArea)
tabs_setting.setFixedHeight(self.IMAGE_HEIGHT)
tabs_setting.setFixedWidth(self.IMAGE_WIDTH)
tab_scr = oasysgui.createTabPage(tabs_setting, "Python Script")
tab_out = oasysgui.createTabPage(tabs_setting, "System Output")
self.pythonScript = oasysgui.textArea(readOnly=False)
self.pythonScript.setStyleSheet(
"background-color: white; font-family: Courier, monospace;")
self.pythonScript.setMaximumHeight(self.IMAGE_HEIGHT - 250)
script_box = oasysgui.widgetBox(tab_scr,
"",
addSpace=False,
orientation="vertical",
height=self.IMAGE_HEIGHT - 10,
width=self.IMAGE_WIDTH - 10)
script_box.layout().addWidget(self.pythonScript)
console_box = oasysgui.widgetBox(script_box,
"",
addSpace=True,
orientation="vertical",
height=150,
width=self.IMAGE_WIDTH - 10)
self.console = PythonConsole(self.__dict__, self)
console_box.layout().addWidget(self.console)
self.wofry_output = oasysgui.textArea()
out_box = oasysgui.widgetBox(tab_out,
"System Output",
addSpace=True,
orientation="horizontal",
height=self.IMAGE_WIDTH - 45)
out_box.layout().addWidget(self.wofry_output)
#############################
button_box = oasysgui.widgetBox(tab_scr,
"",
addSpace=True,
orientation="horizontal")
gui.button(button_box,
self,
"Run Script",
callback=self.execute_script,
height=40)
# gui.button(button_box, self, "Save Script to File", callback=self.save_script, height=40)
gui.rubber(self.controlArea)
self.process_showers()
def __init__(self):
super().__init__()
self.in_data = None
self.in_distance = None
self.in_learner = None
self.in_classifier = None
self.in_object_1 = None
self.in_object_2 = None
self.in_object_3 = None
self.in_object_4 = None
self.in_object_5 = None
self.in_object_6 = None
self.in_object_7 = None
self.in_object_8 = None
self.in_object_9 = None
self.in_object_10 = None
# MODIFIED BY LUCA REBUFFI 14/10/2014
#self.auto_execute = False
for s in self.libraryListSource:
s.flags = 0
self._cachedDocuments = {}
self.infoBox = gui.widgetBox(self.controlArea, 'Info')
gui.label(
self.infoBox, self,
"<p>Execute python script.</p><p>Input variables:<ul><li> " + \
"<li>".join([self.inputs[0].name, ".",".",".", self.inputs[-1].name]) + \
"</ul></p><p>Output variables:<ul><li>" + \
"<li>".join(t.name for t in self.outputs) + \
"</ul></p>"
)
self.optionBox = oasysgui.widgetBox(self.controlArea, 'Options')
gui.comboBox(self.optionBox,
self,
"font_size",
label="Font Size",
labelWidth=120,
items=self.fonts,
sendSelectedValue=False,
orientation="horizontal",
callback=self.changeFont)
self.libraryList = itemmodels.PyListModel(
[],
self,
flags=Qt.ItemIsSelectable | Qt.ItemIsEnabled | Qt.ItemIsEditable)
self.libraryList.wrap(self.libraryListSource)
self.controlBox = gui.widgetBox(self.controlArea, 'Library')
self.controlBox.layout().setSpacing(1)
self.libraryView = QListView(
editTriggers=QListView.DoubleClicked | QListView.EditKeyPressed,
sizePolicy=QSizePolicy(QSizePolicy.Ignored, QSizePolicy.Preferred))
self.libraryView.setItemDelegate(ScriptItemDelegate(self))
self.libraryView.setModel(self.libraryList)
self.libraryView.selectionModel().selectionChanged.connect(
self.onSelectedScriptChanged)
self.controlBox.layout().addWidget(self.libraryView)
w = itemmodels.ModelActionsWidget()
self.addNewScriptAction = action = QAction("+", self)
action.setToolTip("Add a new script to the library")
action.triggered.connect(self.onAddScript)
w.addAction(action)
action = QAction(unicodedata.lookup("MINUS SIGN"), self)
action.setToolTip("Remove script from library")
action.triggered.connect(self.onRemoveScript)
w.addAction(action)
action = QAction("Update", self)
action.setToolTip("Save changes in the editor to library")
action.setShortcut(QKeySequence(QKeySequence.Save))
action.triggered.connect(self.commitChangesToLibrary)
w.addAction(action)
action = QAction("More", self, toolTip="More actions")
new_from_file = QAction("Import a script from a file", self)
save_to_file = QAction("Save selected script to a file", self)
save_to_file.setShortcut(QKeySequence(QKeySequence.SaveAs))
new_from_file.triggered.connect(self.onAddScriptFromFile)
save_to_file.triggered.connect(self.saveScript)
menu = QMenu(w)
menu.addAction(new_from_file)
menu.addAction(save_to_file)
action.setMenu(menu)
button = w.addAction(action)
button.setPopupMode(QToolButton.InstantPopup)
w.layout().setSpacing(1)
self.controlBox.layout().addWidget(w)
self.runBox = gui.widgetBox(self.controlArea, 'Run')
gui.button(self.runBox, self, "Execute", callback=self.execute)
gui.checkBox(self.runBox,
self,
"auto_execute",
"Auto execute",
tooltip="Run the script automatically whenever " +
"the inputs to the widget change.")
self.splitCanvas = QSplitter(Qt.Vertical, self.mainArea)
self.mainArea.layout().addWidget(self.splitCanvas)
self.defaultFont = defaultFont = \
"Monaco" if sys.platform == "darwin" else "Courier"
self.textBox = gui.widgetBox(self, 'Python script')
self.splitCanvas.addWidget(self.textBox)
self.text = PythonScriptEditor(self)
self.textBox.layout().addWidget(self.text)
self.textBox.setAlignment(Qt.AlignVCenter)
self.text.setTabStopWidth(4)
self.text.modificationChanged[bool].connect(self.onModificationChanged)
self.saveAction = action = QAction("&Save", self.text)
action.setToolTip("Save script to file")
action.setShortcut(QKeySequence(QKeySequence.Save))
action.setShortcutContext(Qt.WidgetWithChildrenShortcut)
action.triggered.connect(self.saveScript)
self.consoleBox = gui.widgetBox(self, 'Console')
self.splitCanvas.addWidget(self.consoleBox)
self.console = PythonConsole(self.__dict__, self)
self.consoleBox.layout().addWidget(self.console)
self.console.document().setDefaultFont(QFont(defaultFont))
self.consoleBox.setAlignment(Qt.AlignBottom)
self.console.setTabStopWidth(4)
select_row(self.libraryView, self.currentScriptIndex)
self.splitCanvas.setSizes([2, 1])
if self.splitterState is not None:
self.splitCanvas.restoreState(QByteArray(self.splitterState))
self.splitCanvas.splitterMoved[int, int].connect(self.onSpliterMoved)
self.controlArea.layout().addStretch(1)
self.resize(800, 600)
self.changeFont()
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "X0h Request Form", addSpace=True, orientation="vertical",
width=400, height=630)
left_box_2 = oasysgui.widgetBox(left_box_1, "X-rays", addSpace=True, orientation="horizontal", width=380, height=110)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=True, orientation="vertical", width=150, height=110)
gui.radioButtons(left_box_2_1, self, "xway", ["Wavelength (Å)", "Energy (keV)", "Characteristic line"], callback=self.set_xway )
self.box_wave = oasysgui.widgetBox(left_box_2, "", addSpace=True, orientation="vertical", width=190)
gui.separator(self.box_wave, height=10)
oasysgui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2, "", addSpace=True, orientation="horizontal", width=190, height=110)
gui.separator(self.box_line, height=120)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button( self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
left_box_3 = oasysgui.widgetBox(left_box_1, "Target", addSpace=True, orientation="horizontal", width=380, height=140)
left_box_3_1 = oasysgui.widgetBox(left_box_3, "", addSpace=True, orientation="vertical", width=125, height=110)
gui.radioButtons(left_box_3_1, self, "coway", ["Crystal", "Other Material", "Chemical Formula"], callback=self.set_coway )
self.box_crystal = oasysgui.widgetBox(left_box_3, "", addSpace=True, orientation="horizontal", width=210)
XRayServerGui.combobox_text(self.box_crystal, self, "code", label="", labelWidth=0,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button( self.box_crystal, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
self.box_other = oasysgui.widgetBox(left_box_3, "", addSpace=True, orientation="horizontal", width=210)
gui.separator(self.box_other, height=75)
XRayServerGui.combobox_text(self.box_other, self, "amor", label="", labelWidth=0,
items=self.get_others(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.amor)
button = gui.button( self.box_other, self, "?", callback=self.help_others)
button.setFixedWidth(15)
self.box_chemical = oasysgui.widgetBox(left_box_3, "", addSpace=True, orientation="vertical", width=210, height=140)
gui.separator(self.box_chemical, height=50)
oasysgui.lineEdit(self.box_chemical, self, "chem", label=" ", labelWidth=1, addSpace=False, valueType=str, orientation="horizontal", callback=self.set_rho)
oasysgui.lineEdit(self.box_chemical, self, "rho", label=u"\u03C1" + " (g/cm3)", labelWidth=60, addSpace=False, valueType=float, orientation="horizontal")
self.set_coway()
left_box_4 = oasysgui.widgetBox(left_box_1, "Reflection", addSpace=True, orientation="horizontal", width=380, height=60)
oasysgui.lineEdit(left_box_4, self, "i1", label="Miller indices", labelWidth=200, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4, self, "i2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4, self, "i3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
left_box_5 = oasysgui.widgetBox(left_box_1, "Database Options for dispersion corrections df1, df2", addSpace=True, orientation="vertical", width=380, height=185)
gui.radioButtons(left_box_5, self, "df1df2", ["Auto (Henke at low energy, X0h at mid, Brennan-Cowan\nat high)",
"Use X0h data (5-25 keV or 0.5-2.5 A), recommended for\nBragg diffraction",
"Use Henke data (0.01-30 keV or 0.4-1200 A),\nrecommended for soft x-rays",
"Use Brennan-Cowan data (0.03-700 keV or 0.02-400 A)",
"Compare results for all of the above sources"])
left_box_6 = oasysgui.widgetBox(left_box_1, "Output Options", addSpace=True, orientation="vertical", width=380, height=50)
gui.checkBox(left_box_6, self, "detail", "Print atomic coordinates", labelWidth=250)
button = gui.button(self.controlArea, self, "Get X0h!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.x0h_output = QWebView(self.tabs[0])
self.tabs[0].layout().addWidget(self.x0h_output)
self.x0h_output.setFixedHeight(640)
self.x0h_output.setFixedWidth(740)
def __init__(self):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.runaction = OWAction("Run Action", self)
self.runaction.triggered.connect(self.run_action)
self.addAction(self.runaction)
# CONTROL AREA
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
general_options_box = oasysgui.widgetBox(self.controlArea,
"General Options",
addSpace=True,
orientation="vertical",
width=400)
oasysgui.lineEdit(general_options_box,
self,
"field_1",
label="Field 1",
labelWidth=250,
addSpace=False,
valueType=float,
orientation="horizontal")
oasysgui.lineEdit(general_options_box,
self,
"field_2",
label="Field 2",
labelWidth=250,
addSpace=False,
valueType=str,
orientation="horizontal")
gui.comboBox(general_options_box,
self,
"field_3",
label="Field 3",
items=["Option 1", "Option 2", "Option 3", "Option 4"],
sendSelectedValue=False,
orientation="horizontal",
callback=self.set_field_3)
gui.radioButtons(general_options_box,
self,
"field_4",
["Option 1", "Option 2", "Option 3", "Option 4"],
callback=self.set_field_4)
gui.checkBox(general_options_box, self, 'field_5', 'Field 5')
file_box = oasysgui.widgetBox(general_options_box,
"",
addSpace=False,
orientation="horizontal",
height=25)
self.le_file = oasysgui.lineEdit(file_box,
self,
"file",
label="some file",
addSpace=False,
orientation="horizontal")
gui.button(file_box, self, "...", callback=self.select_file)
text_area_box = oasysgui.widgetBox(general_options_box,
"",
addSpace=False,
orientation="vertical",
width=390,
height=330)
self.text_area = oasysgui.textArea(height=320,
width=380,
readOnly=False)
self.text_area.setText(self.notes)
self.text_area.textChanged.connect(self.set_text_area)
text_area_box.layout().addWidget(self.text_area)
gui.separator(general_options_box)
gui.button(general_options_box,
self,
"Run Action",
callback=self.run_action,
height=45)
self.call_callbacks()
# MAIN AREA
self.main_tabs = oasysgui.tabWidget(self.mainArea)
plot_tab = oasysgui.createTabPage(self.main_tabs, "Plots")
out_tab = oasysgui.createTabPage(self.main_tabs, "Output")
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "TER_SL Request Form", addSpace=False, orientation="vertical",
width=500, height=680)
self.central_tabs = oasysgui.tabWidget(left_box_1)
tab_template = oasysgui.createTabPage(self.central_tabs, "Template Options")
tab_input = oasysgui.createTabPage(self.central_tabs, "Input Options")
left_box_1_1 = oasysgui.widgetBox(tab_template, "", addSpace=False, orientation="vertical", width=480, height=670)
gui.separator(left_box_1_1)
ter_sl_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(ter_sl_box, self, "ter_sl_form",
["Specular reflection from perfect reflectors",
"Specular reflection from multilayers",
"Specular reflection from perfect reflectors + standing waves",
"Specular reflection from multilayers + standing waves"],
callback=self.set_TerSLForm)
# -------------------------------------------------------------
# -------------------------------------------------------------
# -------------------------------------------------------------
gui.separator(tab_input)
left_box_2 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(left_box_2_1, self, "xway", label="X-rays specified by",
items=["Wavelength (Å)", "Energy (keV)", "Bragg angle (deg)", "X-ray line"],
callback=self.set_xway, sendSelectedValue=False, orientation="horizontal")
self.box_wave = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
oasysgui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
gui.comboBox(left_box_2_1, self, "ipol", label="Polarization",
items=["Sigma", "Pi", "Mixed"], sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
left_box_3 = oasysgui.widgetBox(tab_input, "", addSpace=True, orientation="vertical", width=470)
gui.separator(left_box_3, height=4)
left_box_3_top = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.label(left_box_3_top, self, "Substrate:")
left_box_3_content = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
left_box_3_left = oasysgui.widgetBox(left_box_3_content, "", addSpace=False, orientation="vertical", width=20)
left_box_3_right = oasysgui.widgetBox(left_box_3_content, "", addSpace=False, orientation="vertical", width=445)
gui.radioButtons(left_box_3_left, self, "subway", [" ", " ", " "], callback=self.set_subway)
self.left_box_3_1 = oasysgui.widgetBox(left_box_3_right, "", addSpace=False, orientation="horizontal", width=445)
XRayServerGui.combobox_text(self.left_box_3_1, self, "code", label="Crystal", labelWidth=45,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button(self.left_box_3_1, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
gui.comboBox(self.left_box_3_1, self, "df1df2", label=" ", labelWidth=1,
items=["Auto DB for f\', f\'\'",
"X0h data (0.5-2.5 A)",
"Henke (0.4-1200 A)",
"Brennan (0.02-400 A)"],
sendSelectedValue=False, orientation="horizontal")
self.left_box_3_2 = oasysgui.widgetBox(left_box_3_right, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(self.left_box_3_2, self, "chem", label="Chemical Formula", labelWidth=110, addSpace=False, valueType=str, orientation="horizontal", callback=self.set_rho)
oasysgui.lineEdit(self.left_box_3_2, self, "rho", label=u"\u03C1" + " (g/cm3)", labelWidth=60, addSpace=False, valueType=float, orientation="horizontal")
self.left_box_3_3 = oasysgui.widgetBox(left_box_3_right, "", addSpace=False, orientation="vertical", width=445)
left_box_3_3_1 = oasysgui.widgetBox(self.left_box_3_3, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(left_box_3_3_1, self, "x0", label="Susceptibility x0 (", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(left_box_3_3_1, self, " ) format: x0=(Re(x0), Im(x0))", labelWidth=230 )
left_box_3_3_2 = oasysgui.widgetBox(self.left_box_3_3, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(left_box_3_3_2, self, "w0", label="x0 correction: w0", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(left_box_3_3_2, self, " this is used as: x0 = w0 * x0", labelWidth=230)
left_box_3_3_3 = oasysgui.widgetBox(self.left_box_3_3, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(left_box_3_3_3, self, "sigma", label="Roughness: sigma [Å]", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(left_box_3_3_3, self, " OR ")
oasysgui.lineEdit(left_box_3_3_3, self, "tr", label="Transition layer tr [Å]", labelWidth=120, addSpace=False, valueType=float, orientation="horizontal")
self.set_subway()
# -------------------------------------------------------------
left_box_4 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470)
left_box_4_1 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="vertical", width=470)
gui.label(left_box_4_1, self, "Incidence angle limits:")
left_box_4_1_1 = oasysgui.widgetBox(left_box_4_1, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(left_box_4_1_1, self, "scanmin", label=" From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1_1, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(left_box_4_1_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
# -------------------------------------------------------------
# -------------------------------------------------------------
self.standing_waves_box = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470, height=140)
self.standing_waves_box_hidden = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470, height=140)
gui.separator(self.standing_waves_box, 10)
standing_waves_box_1 = oasysgui.widgetBox(self.standing_waves_box, "", addSpace=False, orientation="horizontal", width=120)
gui.checkBox(standing_waves_box_1, self, "swflag", "", callback=self.set_swflag)
gui.label(standing_waves_box_1, self, "Standing waves:")
self.standing_waves_box_2 = oasysgui.widgetBox(self.standing_waves_box, "", addSpace=False, orientation="vertical", width=470)
standing_waves_box_2_1 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_1, self, "swref", label="Reference interface", labelWidth=130, addSpace=False, valueType=int, orientation="horizontal")
gui.label(standing_waves_box_2_1, self, " (0=surface)")
standing_waves_box_2_2 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_2, self, "swmin", label="Start offset", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(standing_waves_box_2_2, self, " [Å]", labelWidth=70)
standing_waves_box_2_3 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_3, self, "swmax", label="End offset", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(standing_waves_box_2_3, self, " [Å]", labelWidth=70)
standing_waves_box_2_4 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_4, self, "swpts", label="Number of offsets", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(standing_waves_box_2_4, self, " (max = 401)")
self.set_swflag()
gui.separator(tab_input)
# -------------------------------------------------------------
box_top = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
box_top_0 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=250)
gui.label(box_top_0, self, "Top layer profile (optional):")
button = gui.button(box_top_0, self, "? (sintax)", callback=self.help_profile)
button.setFixedWidth(90)
box_top_1 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
self.profile_area = QtWidgets.QTextEdit()
self.profile_area.setStyleSheet("background-color: white;")
self.profile_area.setMaximumHeight(240)
self.profile_area.setMaximumWidth(335)
self.profile_area.setLineWrapMode(QtWidgets.QTextEdit.NoWrap)
box_top_1.layout().addWidget(self.profile_area)
gui.separator(box_top_1)
box_top_labels = oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="vertical", width=130)
gui.label(box_top_labels, self, "Available Codes:")
crystals_area = QtWidgets.QTextEdit()
crystals_area.setStyleSheet("background-color: white;")
crystals_area.setMaximumHeight(295)
crystals_area.setMaximumWidth(130)
crystals_area.setText("\n".join(ListUtility.get_list("crystals")))
crystals_area.setReadOnly(True)
box_top_labels.layout().addWidget(crystals_area)
gui.separator(box_top)
# -----------------------------------------------------------
button = gui.button(tab_input, self, "Submit Query!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.set_TerSLForm(change_values=False, switch_page=False)
self.profile_area.textChanged.connect(self.set_profile)
def add_parameter_box(container_box, variable, label):
box = oasysgui.widgetBox(container_box,
"",
addSpace=False,
orientation="horizontal")
oasysgui.lineEdit(box,
self,
variable,
label,
labelWidth=50,
valueType=float,
orientation="horizontal")
gui.label(box, self, " ", labelWidth=58)
box = oasysgui.widgetBox(container_box,
"",
addSpace=False,
orientation="horizontal")
setattr(
self, "le_" + variable + "_min",
oasysgui.lineEdit(box,
self,
variable + "_min",
"Min",
labelWidth=50,
valueType=float,
orientation="horizontal"))
setattr(
self, "le_" + variable + "_max",
oasysgui.lineEdit(box,
self,
variable + "_max",
"Max",
labelWidth=35,
valueType=float,
orientation="horizontal"))
gui.checkBox(box,
self,
variable + "_fixed",
"Fixed",
callback=getattr(self, "set_" + variable))
box = oasysgui.widgetBox(container_box,
"",
addSpace=False,
orientation="horizontal")
le = oasysgui.lineEdit(box,
self,
variable + "_out",
"Fitted",
labelWidth=50,
valueType=float,
orientation="horizontal")
le.setEnabled(False)
le.setStyleSheet(
"color: blue; background-color: rgb(254, 244, 205); font:bold")
def set_variable_fit():
setattr(self, variable, getattr(self, variable + "_out"))
gui.button(box,
self,
"<- Use",
width=58,
callback=set_variable_fit)
getattr(self, "set_" + variable)()
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "GID_SL Request Form", addSpace=False, orientation="vertical",
width=500, height=680)
self.central_tabs = oasysgui.tabWidget(left_box_1)
tab_template = oasysgui.createTabPage(self.central_tabs, "Template Options")
tab_input = oasysgui.createTabPage(self.central_tabs, "Input Options")
left_box_1_1 = oasysgui.widgetBox(tab_template, "", addSpace=False, orientation="vertical", width=480, height=670)
gui.separator(left_box_1_1)
gui.comboBox(left_box_1_1, self, "template_type", label="Template Type", labelWidth=100,
items=["Simplified (coplanar geometries only)", "Full"],
callback=self.set_TemplateType, sendSelectedValue=False, orientation="horizontal")
self.simplified_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.simplified_box, self, "simplified_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Symmetric Bragg diffraction at Bragg angle of 90 degrees (\"back diffraction\")",
"Energy scanning of symmetric Bragg diffraction peaks"],
callback=self.set_SimplifiedForm)
self.full_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.full_box, self, "full_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Coplanar extremely asymmetric diffraction of synchrotron radiation",
"Grazing incidence (\"surface\") diffraction from perfect crystals",
"Grazing incidence (\"surface\") diffraction from multilayers in the scheme\nwith position sensitive detector (PSD)",
"Non-coplanar Bragg-Laue diffraction from crystals with a few degrees\nsurface miscut"],
callback=self.set_FullForm)
# -------------------------------------------------------------
# -------------------------------------------------------------
# -------------------------------------------------------------
gui.separator(tab_input)
left_box_2 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(left_box_2_1, self, "xway", label="X-rays specified by",
items=["Wavelength (Å)", "Energy (keV)", "Bragg angle (deg)", "X-ray line"],
callback=self.set_xway, sendSelectedValue=False, orientation="horizontal")
self.box_wave = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
gui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
gui.comboBox(left_box_2_1, self, "ipol", label="Polarization",
items=["Sigma", "Pi", "Mixed"], sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
left_box_3 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_3_1 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
XRayServerGui.combobox_text(left_box_3_1, self, "code", label="Crystal", labelWidth=40,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button(left_box_3_1, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
gui.comboBox(left_box_3_1, self, "df1df2", label=" ", labelWidth=20,
items=["Auto DB for f\', f\'\'",
"X0h data (0.5-2.5 A)",
"Henke (0.4-1200 A)",
"Brennan (0.02-400 A)"],
sendSelectedValue=False, orientation="horizontal")
left_box_3_2 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(left_box_3_2, self, "sigma", label="Sigma", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(left_box_3_2, self, "w0", label="A W0", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(left_box_3_2, self, "wh", label=" Wh", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
left_box_4 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470)
left_box_4_1 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=240)
gui.lineEdit(left_box_4_1, self, "i1", label="Bragg Reflection", labelWidth=97, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(left_box_4_1, self, "i2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(left_box_4_1, self, "i3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
left_box_4_2 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=228)
gui.lineEdit(left_box_4_2, self, "daa", label=" Substrate da/a", labelWidth=135, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
# -------------------------------------------------------------
self.simplified_input_box = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470, height=290)
gui.comboBox(self.simplified_input_box, self, "igie", label="Geometry specified by",
items=["angle of Bragg planes to surface ('+' for g0>gh)",
"incidence angle of K0",
"exit angle of Kh",
"asymmetry factor beta=g0/gh"],
callback=self.set_igie_s, sendSelectedValue=False, orientation="horizontal")
simplified_input_box_1 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(simplified_input_box_1, self, "fcentre", label="Value", labelWidth=280, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_s = gui.comboBox(simplified_input_box_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_s()
simplified_input_box_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(simplified_input_box_2, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(simplified_input_box_2, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
self.simplified_input_box_scan_1_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_1_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
gui.lineEdit(self.simplified_input_box_scan_1_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_1_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.checkBox(self.simplified_input_box_scan_1_2, self, "invert", "Invert axis", labelWidth=190)
gui.comboBox(self.simplified_input_box_scan_1_2, self, "column", label="Plot argument", labelWidth=100,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
self.simplified_input_box_scan_2_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
self.unis_combo_s = gui.comboBox(self.simplified_input_box_scan_2_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad",
"eV"],
sendSelectedValue=False, orientation="horizontal")
gui.lineEdit(self.simplified_input_box_scan_2_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_2_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_2_2, self, "axis", label="Scan Type", labelWidth=290,
items=["[k0 x h]",
"Energy (eV)",
"Energy (eV), no X0h recalc"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_s)
self.set_scan_type_s()
# -------------------------------------------------------------
# -------------------------------------------------------------
self.full_input_box = oasysgui.widgetBox(tab_input, "", addSpace=True, orientation="vertical", width=470, height=290)
gui.comboBox(self.full_input_box, self, "igie", label="Geom. by", labelWidth=60,
items=["[1]. Surface orientation & incidence angle of K0",
"[2]. Surface orientation & exit angle of Kh",
"[3]. Surface orientation & condition of coplanar grazing incidence",
"[4]. Surface orientation & condition of coplanar grazing exit",
"[5]. Surface orientation & condition of symmetric Bragg case",
"[6]. Condition of coplanar reflection & angle of Bragg planes to surface",
"[7]. Condition of coplanar reflection & incidence angle of K0",
"[8]. Condition of coplanar reflection & exit angle of Kh",
"[9]. Condition of coplanar reflection & asymmetry factor beta=g0/gh"],
callback=self.set_igie_f, sendSelectedValue=False, orientation="horizontal")
gui.label(self.full_input_box, self, "-- Geom. parameter ([1,7]=incidence angle, [2,8]=exit angle, [6]=Bragg planes")
full_input_box_1 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_1_1 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=470)
self.le_fcentre = gui.lineEdit(full_input_box_1_1, self, "fcentre", label=" angle, [9]=g0/gh)",
labelWidth=250, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_f = gui.comboBox(full_input_box_1_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_f()
full_input_box_1_2 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=270)
gui.lineEdit(full_input_box_1_2, self, "n1", label="-- Surface plane ([1-5])", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_1_2, self, "n2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_1_2, self, "n3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="horizontal", width=470)
full_input_box_2_1 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal", width=270)
gui.lineEdit(full_input_box_2_1, self, "m1", label="Miscut direction", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_2_1, self, "m2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_2_1, self, "m3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2_2 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal")
gui.lineEdit(full_input_box_2_2, self, "miscut", label="Miscut angle", addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_2_2, self, "unim", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
full_input_box_3 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_3_1 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_3_1, self, "axis", label="Scan Type", labelWidth=190,
items=["Surface normal (N_surface)",
"[k0 x N_surface]",
"Reciprocal latt.vector (h)",
"[k0 x h]",
"Other axis",
"Takeoff spectrum (PSD)"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_f)
gui.checkBox(full_input_box_3_1, self, "invert", "Invert axis", labelWidth=90)
full_input_box_3_2 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
self.le_a1 = gui.lineEdit(full_input_box_3_2, self, "a1", label="Indices, if other scan axis", labelWidth=290, addSpace=False, valueType=int, orientation="horizontal")
self.le_a2 = gui.lineEdit(full_input_box_3_2, self, "a2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.le_a3 = gui.lineEdit(full_input_box_3_2, self, "a3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.set_scan_type_f()
full_input_box_5 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_5_1 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(full_input_box_5_1, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(full_input_box_5_1, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_5_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
gui.lineEdit(full_input_box_5_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_5_2 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_5_2, self, "column", label="Plot argument", labelWidth=290,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
box_alpha = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=280)
self.le_alphamax = gui.lineEdit(box_alpha, self, "alphamax", label="Approximations: alpha_max", labelWidth=170, addSpace=False, valueType=float, orientation="horizontal")
gui.label(box_alpha, self, "*|xh|")
gui.separator(tab_input)
# -------------------------------------------------------------
box_top = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
box_top_0 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_0_1 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="vertical", width=100)
gui.label(box_top_0_1, self, "Top layer profile\n(optional):")
button = gui.button(box_top_0_1, self, "? (sintax)", callback=self.help_profile)
button.setFixedWidth(90)
box_top_0_2 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="horizontal", width=360)
self.profile_area = QtWidgets.QTextEdit()
self.profile_area.setMaximumHeight(110)
self.profile_area.setMaximumWidth(360)
box_top_0_2.layout().addWidget(self.profile_area)
box_top_labels = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_labels_1 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=100)
gui.label(box_top_labels_1, self, "Available Codes:")
box_top_labels_2 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=360)
gui.label(box_top_labels_2, self, "Crystals")
gui.label(box_top_labels_2, self, "Non-Crystals")
gui.label(box_top_labels_2, self, "Elements")
box_top_1 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=100)
box_top_1_2 = oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=360)
crystals_area = QtWidgets.QTextEdit()
crystals_area.setMaximumHeight(100)
crystals_area.setMaximumWidth(120)
crystals_area.setText("\n".join(ListUtility.get_list("crystals")))
crystals_area.setReadOnly(True)
non_crystals_area = QtWidgets.QTextEdit()
non_crystals_area.setMaximumHeight(100)
non_crystals_area.setMaximumWidth(120)
non_crystals_area.setText("\n".join(ListUtility.get_list("amorphous")))
non_crystals_area.setReadOnly(True)
elements_area = QtWidgets.QTextEdit()
elements_area.setMaximumHeight(100)
elements_area.setMaximumWidth(120)
elements_area.setText("\n".join(ListUtility.get_list("atoms")))
elements_area.setReadOnly(True)
box_top_1_2.layout().addWidget(crystals_area)
box_top_1_2.layout().addWidget(non_crystals_area)
box_top_1_2.layout().addWidget(elements_area)
# -----------------------------------------------------------
button = gui.button(tab_input, self, "Submit Query!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.set_TemplateType(change_values=False)
self.profile_area.textChanged.connect(self.set_profile)
self.le_alphamax.focusOutEvent = self.alphamax_focusOutEvent
self.alphamax_focusOutEvent(None)
gui.rubber(self.mainArea)
def create_box_in_widget(cls,
widget,
parent_box,
var,
label=None,
disable_function=False,
add_callback=False,
label_width=40,
min_value=None,
min_accepted=True,
max_value=None,
max_accepted=True,
trim=50):
box = gui.widgetBox(parent_box,
"",
orientation="horizontal",
width=widget.CONTROL_AREA_WIDTH - trim,
height=25)
box_value_width = 100 - (label_width - 40)
box_label = gui.widgetBox(box,
"",
orientation="horizontal",
width=label_width,
height=25)
box_value = gui.widgetBox(box,
"",
orientation="horizontal",
width=box_value_width,
height=25)
box_fixed = gui.widgetBox(box, "", orientation="horizontal", height=25)
box_min_max = gui.widgetBox(box,
"",
orientation="horizontal",
height=30)
box_function = gui.widgetBox(box,
"",
orientation="horizontal",
height=25)
box_function_value = gui.widgetBox(box,
"",
orientation="horizontal",
height=25)
gui.widgetLabel(box_label, var if label is None else label)
if add_callback:
le_var = gui.lineEdit(box_value,
widget,
var,
" ",
labelWidth=0,
valueType=float,
validator=QDoubleValidator(),
callback=getattr(widget, "callback_" + var))
else:
le_var = gui.lineEdit(box_value,
widget,
var,
" ",
labelWidth=0,
valueType=float,
validator=QDoubleValidator())
def set_flags():
fixed = getattr(widget, var + "_fixed") == 1
function = getattr(widget, var + "_function") == 1
if disable_function:
function = False
setattr(widget, var + "_function", 0)
if function:
setattr(widget, var + "_fixed", 0)
box_min_max.setVisible(False)
box_fixed.setVisible(False)
le_var.setVisible(False)
box_value.setFixedWidth(5)
box_function.setVisible(True)
box_function_value.setVisible(True)
elif fixed:
setattr(widget, var + "_function", 0)
box_min_max.setVisible(False)
box_fixed.setVisible(True)
le_var.setVisible(True)
box_value.setFixedWidth(box_value_width)
box_function.setVisible(False)
box_function_value.setVisible(False)
else:
setattr(widget, var + "_fixed", 0)
setattr(widget, var + "_function", 0)
box_min_max.setVisible(True)
box_fixed.setVisible(True)
le_var.setVisible(True)
box_value.setFixedWidth(box_value_width)
box_function.setVisible(True)
box_function_value.setVisible(False)
if add_callback: getattr(widget, "callback_" + var)()
widget.parameter_functions[var] = set_flags
orangegui.checkBox(box_fixed,
widget,
var + "_fixed",
"fix",
callback=set_flags)
def set_min():
setattr(widget, var + "_has_min", 1)
if add_callback: getattr(widget, "callback_" + var)()
def set_max():
setattr(widget, var + "_has_max", 1)
if add_callback: getattr(widget, "callback_" + var)()
min_validator = QMinValueValidator(
min_value, max_value, min_accepted) if not min_value is None else (
QDoubleValidator() if max_value is None else
QMaxValueValidator(max_value, min_value, True))
max_validator = QMaxValueValidator(
max_value, min_value, max_accepted) if not max_value is None else (
QDoubleValidator() if min_value is None else
QMinValueValidator(min_value, max_value, True))
if add_callback:
cb_min = orangegui.checkBox(box_min_max,
widget,
var + "_has_min",
"min",
callback=getattr(
widget, "callback_" + var))
gui.lineEdit(box_min_max,
widget,
var + "_min",
" ",
labelWidth=0,
valueType=float,
validator=min_validator,
callback=set_min)
cb_max = orangegui.checkBox(box_min_max,
widget,
var + "_has_max",
"max",
callback=getattr(
widget, "callback_" + var))
gui.lineEdit(box_min_max,
widget,
var + "_max",
" ",
labelWidth=0,
valueType=float,
validator=max_validator,
callback=set_max)
cb = orangegui.checkBox(box_function,
widget,
var + "_function",
"f(x)",
callback=set_flags)
cb.setEnabled(not disable_function)
gui.lineEdit(box_function_value,
widget,
var + "_function_value",
"expression",
valueType=str,
callback=getattr(widget, "callback_" + var))
else:
cb_min = orangegui.checkBox(box_min_max, widget, var + "_has_min",
"min")
gui.lineEdit(box_min_max,
widget,
var + "_min",
" ",
labelWidth=0,
valueType=float,
validator=min_validator,
callback=set_min)
cb_max = orangegui.checkBox(box_min_max, widget, var + "_has_max",
"max")
gui.lineEdit(box_min_max,
widget,
var + "_max",
" ",
labelWidth=0,
valueType=float,
validator=max_validator,
callback=set_max)
cb = orangegui.checkBox(box_function,
widget,
var + "_function",
"f(x)",
callback=set_flags)
cb.setEnabled(not disable_function)
gui.lineEdit(box_function_value,
widget,
var + "_function_value",
"expression",
valueType=str)
if not min_value is None:
setattr(widget, var + "_has_min", 1)
setattr(widget, var + "_min", min_value)
cb_min.setEnabled(False)
if not max_value is None:
setattr(widget, var + "_has_max", 1)
setattr(widget, var + "_max", max_value)
cb_max.setEnabled(False)
set_flags()
def __init__(self,
widget=None,
parent=None,
index=0,
filename="<input file>",
twotheta_min=0.0,
twotheta_has_min=0,
twotheta_max=0.0,
twotheta_has_max=0,
diffraction_pattern_name=""):
super(DiffractionPatternBox, self).__init__()
self.setLayout(QVBoxLayout())
self.layout().setAlignment(Qt.AlignTop)
self.setFixedWidth(widget.CONTROL_AREA_WIDTH - 35)
self.setFixedHeight(500)
self.widget = widget
self.index = index
self.filename = filename
self.twotheta_min = twotheta_min
self.twotheta_has_min = twotheta_has_min
self.twotheta_max = twotheta_max
self.twotheta_has_max = twotheta_has_max
self.diffraction_pattern_name = diffraction_pattern_name
self.CONTROL_AREA_WIDTH = widget.CONTROL_AREA_WIDTH - 45
parent.layout().addWidget(self)
container = self
gui.lineEdit(container,
self,
"diffraction_pattern_name",
"Sample Name\n(will appear in tabs and plots)",
labelWidth=180,
valueType=str,
callback=widget.dump_diffraction_pattern_name)
file_box = gui.widgetBox(container,
"",
orientation="horizontal",
width=self.CONTROL_AREA_WIDTH)
self.le_filename = gui.lineEdit(file_box,
self,
value="filename",
valueType=str,
label="File",
labelWidth=50,
callback=widget.dump_filename,
orientation="horizontal")
orangegui.button(file_box, self, "...", callback=self.open_folders)
box = gui.widgetBox(container,
"",
orientation="horizontal",
width=self.CONTROL_AREA_WIDTH)
orangegui.checkBox(box,
self,
"twotheta_has_min",
"2\u03b8 min [deg]",
labelWidth=350,
callback=widget.dump_twotheta_has_min)
gui.lineEdit(box,
self,
"twotheta_min",
" ",
labelWidth=5,
valueType=float,
validator=QDoubleValidator(),
callback=self.set_twotheta_min,
orientation="horizontal")
box = gui.widgetBox(container,
"",
orientation="horizontal",
width=self.CONTROL_AREA_WIDTH)
orangegui.checkBox(box,
self,
"twotheta_has_max",
"2\u03b8 max [deg]",
labelWidth=350,
callback=widget.dump_twotheta_has_max)
gui.lineEdit(box,
self,
"twotheta_max",
" ",
labelWidth=5,
valueType=float,
validator=QDoubleValidator(),
callback=self.set_twotheta_max,
orientation="horizontal")
self.is_on_init = False
def __init__(self):
super().__init__()
self.in_data = None
self.in_distance = None
self.in_learner = None
self.in_classifier = None
self.in_object = None
# MODIFIED BY LUCA REBUFFI 14/10/2014
#self.auto_execute = False
for s in self.libraryListSource:
s.flags = 0
self._cachedDocuments = {}
self.infoBox = gui.widgetBox(self.controlArea, 'Info')
gui.label(
self.infoBox, self,
"<p>Execute python script.</p><p>Input variables:<ul><li> " + \
"<li>".join(t.name for t in self.inputs) + \
"</ul></p><p>Output variables:<ul><li>" + \
"<li>".join(t.name for t in self.outputs) + \
"</ul></p>"
)
self.libraryList = itemmodels.PyListModel(
[], self,
flags=Qt.ItemIsSelectable | Qt.ItemIsEnabled | Qt.ItemIsEditable)
self.libraryList.wrap(self.libraryListSource)
self.controlBox = gui.widgetBox(self.controlArea, 'Library')
self.controlBox.layout().setSpacing(1)
self.libraryView = QListView(
editTriggers=QListView.DoubleClicked |
QListView.EditKeyPressed,
sizePolicy=QSizePolicy(QSizePolicy.Ignored,
QSizePolicy.Preferred)
)
self.libraryView.setItemDelegate(ScriptItemDelegate(self))
self.libraryView.setModel(self.libraryList)
self.libraryView.selectionModel().selectionChanged.connect(
self.onSelectedScriptChanged
)
self.controlBox.layout().addWidget(self.libraryView)
w = itemmodels.ModelActionsWidget()
self.addNewScriptAction = action = QAction("+", self)
action.setToolTip("Add a new script to the library")
action.triggered.connect(self.onAddScript)
w.addAction(action)
action = QAction(unicodedata.lookup("MINUS SIGN"), self)
action.setToolTip("Remove script from library")
action.triggered.connect(self.onRemoveScript)
w.addAction(action)
action = QAction("Update", self)
action.setToolTip("Save changes in the editor to library")
action.setShortcut(QKeySequence(QKeySequence.Save))
action.triggered.connect(self.commitChangesToLibrary)
w.addAction(action)
action = QAction("More", self, toolTip="More actions")
new_from_file = QAction("Import a script from a file", self)
save_to_file = QAction("Save selected script to a file", self)
save_to_file.setShortcut(QKeySequence(QKeySequence.SaveAs))
new_from_file.triggered.connect(self.onAddScriptFromFile)
save_to_file.triggered.connect(self.saveScript)
menu = QMenu(w)
menu.addAction(new_from_file)
menu.addAction(save_to_file)
action.setMenu(menu)
button = w.addAction(action)
button.setPopupMode(QToolButton.InstantPopup)
w.layout().setSpacing(1)
self.controlBox.layout().addWidget(w)
self.runBox = gui.widgetBox(self.controlArea, 'Run')
gui.button(self.runBox, self, "Execute", callback=self.execute)
gui.checkBox(self.runBox, self, "auto_execute", "Auto execute",
tooltip="Run the script automatically whenever " +
"the inputs to the widget change.")
self.splitCanvas = QSplitter(Qt.Vertical, self.mainArea)
self.mainArea.layout().addWidget(self.splitCanvas)
self.defaultFont = defaultFont = \
"Monaco" if sys.platform == "darwin" else "Courier"
self.textBox = gui.widgetBox(self, 'Python script')
self.splitCanvas.addWidget(self.textBox)
self.text = PythonScriptEditor(self)
self.textBox.layout().addWidget(self.text)
self.textBox.setAlignment(Qt.AlignVCenter)
self.text.setTabStopWidth(4)
self.text.modificationChanged[bool].connect(self.onModificationChanged)
self.saveAction = action = QAction("&Save", self.text)
action.setToolTip("Save script to file")
action.setShortcut(QKeySequence(QKeySequence.Save))
action.setShortcutContext(Qt.WidgetWithChildrenShortcut)
action.triggered.connect(self.saveScript)
self.consoleBox = gui.widgetBox(self, 'Console')
self.splitCanvas.addWidget(self.consoleBox)
self.console = PythonConsole(self.__dict__, self)
self.consoleBox.layout().addWidget(self.console)
self.console.document().setDefaultFont(QFont(defaultFont))
self.consoleBox.setAlignment(Qt.AlignBottom)
self.console.setTabStopWidth(4)
select_row(self.libraryView, self.currentScriptIndex)
self.splitCanvas.setSizes([2, 1])
if self.splitterState is not None:
self.splitCanvas.restoreState(QByteArray(self.splitterState))
self.splitCanvas.splitterMoved[int, int].connect(self.onSpliterMoved)
self.controlArea.layout().addStretch(1)
self.resize(800, 600)
def build_positioning_directive_box(self,
container_box,
width,
element_type=ElementType.SOURCE):
box = oasysgui.widgetBox(container_box,
"",
orientation="vertical",
width=width - 20)
box_combos = oasysgui.widgetBox(box,
"",
orientation="vertical",
width=width - 20)
box_Distance = oasysgui.widgetBox(box,
"",
orientation="vertical",
width=width - 20)
'''
box_GrazingAngle = oasysgui.widgetBox(box, "", orientation="horizontal", width=width-20)
box_GrazingAngle_check = oasysgui.widgetBox(box_GrazingAngle, "", orientation="horizontal", width=20)
box_GrazingAngle_value = oasysgui.widgetBox(box_GrazingAngle, "", orientation="horizontal")
box_Angle = oasysgui.widgetBox(box, "", orientation="horizontal", width=width-20)
box_Angle_check = oasysgui.widgetBox(box_Angle, "", orientation="horizontal", width=20)
box_Angle_value = oasysgui.widgetBox(box_Angle, "", orientation="horizontal")
def set_WhichAngle():
box_GrazingAngle.setVisible(getattr(self, "WhichAngle") == positioning_directives_which_angle[0])
box_Angle.setVisible(getattr(self, "WhichAngle") != positioning_directives_which_angle[0])
'''
def set_Distance_checked():
box_Distance_value.setEnabled(
getattr(self, "Distance_checked") == 1)
def set_XYCentre_checked():
box_XYCentre_value.setEnabled(
getattr(self, "XYCentre_checked") == 1)
'''
def set_GrazingAngle_checked():
box_GrazingAngle_value.setEnabled(getattr(self, "GrazingAngle_checked") == 1)
def set_Angle_checked():
box_Angle_value.setEnabled(getattr(self, "Angle_checked") == 1)
'''
def set_positioning_directives():
'''
This function correctly sets the positioning directives by setting correct
settings for self.What, self.Where and self.ReferTo from the descriptive
phrases.
Possibilities are:
Autofocus - self.What='centre', self.Where='downstream focus', self.ReferTo='upstream'
DistanceFromSource - self.What='centre', self.Where='centre', self.ReferTo='source'
Custom - allows you to set your own self.What, self.Where and self.ReferTo
'''
if element_type == ElementType.SOURCE:
self.Distance_checked = 0
self.UseDistance = 0
self.UseDefocus = 0
self.UseCustom = 1
self.What = None
self.Where = None
self.ReferTo = PositioningDirectives.ReferTo.AbsoluteReference
else:
self.set_UseDistance()
self.set_UseDefocus()
self.set_UseCustom()
self.set_Orientation()
if self.WhatWhereReferTo == PositioningDirectivesPhrases.Type.OasysDefault:
self.What = PositioningDirectives.What.Centre
self.Where = PositioningDirectives.Where.Centre
self.ReferTo = PositioningDirectives.ReferTo.UpstreamElement
self.UseAsReference = True
elif self.WhatWhereReferTo == PositioningDirectivesPhrases.Type.Autofocus:
self.What = PositioningDirectives.What.Centre
self.Where = PositioningDirectives.Where.DownstreamFocus
self.ReferTo = PositioningDirectives.ReferTo.UpstreamElement
elif self.WhatWhereReferTo == PositioningDirectivesPhrases.Type.DistanceFromSource:
self.What = PositioningDirectives.What.Centre
self.Where = PositioningDirectives.Where.Centre
self.ReferTo = PositioningDirectives.ReferTo.Source
elif self.WhatWhereReferTo == PositioningDirectivesPhrases.Type.Custom:
pass
else:
raise Exception(
"Wrong PositioningDirectives, only WhatWhereReferTo are allowed!"
)
self.use_distance_box.setVisible(self.UseDistance)
self.use_distance_box_empty.setVisible(self.UseDistance)
self.use_defocus_box.setVisible(self.UseDefocus)
self.use_defocus_box_empty.setVisible(self.UseDefocus)
self.use_custom_box.setVisible(self.UseCustom)
self.use_custom_box_empty.setVisible(self.UseCustom)
pass
#set_WhichAngle()
# Build a combo box with the choice of positioning directions phrases
if element_type != ElementType.SOURCE:
# le = oasysgui.lineEdit(box_Distance, self, "ReferenceOE", "Reference O.E.", labelWidth=220,
# valueType=str, orientation="horizontal")
#
# le.setReadOnly(True)
# font = QFont(le.font())
# # font.setBold(True)
# le.setFont(font)
# palette = QPalette(le.palette())
# palette.setColor(QPalette.Text, QColor('grey'))
# palette.setColor(QPalette.Base, QColor(243, 240, 140))
# le.setPalette(palette)
box_orientation = oasysgui.widgetBox(box_combos,
"",
orientation="horizontal",
width=width - 20)
gui.label(box_orientation,
self,
label="Orientation",
labelWidth=87)
gui.comboBox(box_orientation,
self,
"OrientationGUI",
items=positioning_directives_orientation,
sendSelectedValue=True,
orientation="horizontal",
callback=set_positioning_directives)
box_type = oasysgui.widgetBox(box_combos,
"",
orientation="horizontal",
width=width - 20)
gui.label(box_type, self, label="Position", labelWidth=87)
gui.comboBox(box_type,
self,
"WhatWhereReferTo",
items=positioning_directives_combos,
sendSelectedValue=True,
orientation="horizontal",
callback=set_positioning_directives) # Send the value
gui.separator(box_combos)
self.use_distance_box = oasysgui.widgetBox(
box_Distance, "", orientation="horizontal", width=width - 20)
self.use_distance_box_empty = oasysgui.widgetBox(
box_Distance, "", orientation="horizontal", width=width - 20)
self.le_Distance_default = oasysgui.lineEdit(
self.use_distance_box,
self,
"Distance",
"Distance [m]",
labelWidth=220,
valueType=float,
orientation="horizontal")
self.use_defocus_box = oasysgui.widgetBox(box_Distance,
"",
orientation="horizontal",
width=width - 20)
self.use_defocus_box_empty = oasysgui.widgetBox(
box_Distance, "", orientation="horizontal", width=width - 20)
self.le_defocus = oasysgui.lineEdit(self.use_defocus_box,
self,
"Distance",
"Defocus [m]",
labelWidth=220,
valueType=float,
orientation="horizontal")
self.use_custom_box = oasysgui.widgetBox(box,
"",
orientation="vertical",
width=width - 20)
self.use_custom_box_empty = oasysgui.widgetBox(
box, "", orientation="vertical", width=width - 20)
box_XYDistance = oasysgui.widgetBox(self.use_custom_box,
"",
orientation="horizontal",
width=width - 20)
box_Distance_check = oasysgui.widgetBox(box_XYDistance,
"",
orientation="horizontal",
width=20)
box_Distance_value = oasysgui.widgetBox(box_XYDistance,
"",
orientation="vertical")
box_XYCentre = oasysgui.widgetBox(self.use_custom_box,
"",
orientation="horizontal",
width=width - 20)
box_XYCentre_check = oasysgui.widgetBox(box_XYCentre,
"",
orientation="horizontal",
width=20)
box_XYCentre_value = oasysgui.widgetBox(box_XYCentre,
"",
orientation="vertical")
# = oasysgui.widgetBox(box_Distance, "", orientation="vertical", width=width - 20)
# self.use_custom_box_empty = oasysgui.widgetBox(box_Distance, "", orientation="horizontal", width=width - 20)
box_what = oasysgui.widgetBox(self.use_custom_box,
"",
orientation="horizontal")
gui.label(box_what, self, label="Place", labelWidth=87)
gui.comboBox(box_what,
self,
"What",
label="",
items=positioning_directives_what,
sendSelectedValue=True,
orientation="horizontal",
callback=set_positioning_directives)
gui.label(box_what, self, label=" of this O.E.", labelWidth=80)
box_where = oasysgui.widgetBox(self.use_custom_box,
"",
orientation="horizontal")
gui.label(box_where, self, label="at", labelWidth=87)
gui.comboBox(box_where,
self,
"Where",
label="",
items=positioning_directives_where,
sendSelectedValue=True,
orientation="horizontal",
callback=set_positioning_directives)
gui.label(box_where, self, label=" of", labelWidth=80)
box_refer_to = oasysgui.widgetBox(self.use_custom_box,
"",
orientation="horizontal")
gui.label(box_refer_to, self, label=" ", labelWidth=87)
gui.comboBox(box_refer_to,
self,
"ReferTo",
label="",
items=positioning_directives_refer_to,
sendSelectedValue=True,
orientation="horizontal",
callback=set_positioning_directives)
gui.label(box_refer_to, self, label=" O.E.", labelWidth=80)
'''
gui.comboBox(box_combos, self, "WhichAngle", label="Type Of Angle",
items=positioning_directives_which_angle, labelWidth=box_combos.width()-150,
sendSelectedValue=True, orientation="horizontal", callback=set_WhichAngle)
'''
gui.checkBox(box_Distance_check,
self,
"Distance_checked",
"",
callback=set_Distance_checked)
gui.checkBox(box_XYCentre_check,
self,
"XYCentre_checked",
"",
callback=set_XYCentre_checked)
'''
gui.checkBox(box_GrazingAngle_check, self, "GrazingAngle_checked", "", callback=set_GrazingAngle_checked)
gui.checkBox(box_Angle_check, self, "Angle_checked", "", callback=set_Angle_checked)
'''
set_Distance_checked()
set_XYCentre_checked()
'''
set_Angle_checked()
set_GrazingAngle_checked()
'''
self.le_Distance = oasysgui.lineEdit(box_Distance_value,
self,
"Distance",
"Distance [m]",
labelWidth=196,
valueType=float,
orientation="horizontal")
self.le_XCentre = oasysgui.lineEdit(box_XYCentre_value,
self,
"XCentre",
"X Centre [m]",
labelWidth=196,
valueType=float,
orientation="horizontal")
self.le_YCentre = oasysgui.lineEdit(box_XYCentre_value,
self,
"YCentre",
"Y Centre [m]",
labelWidth=196,
valueType=float,
orientation="horizontal")
'''
oasysgui.lineEdit(box_Angle_value, self, "Angle", "Angle [deg]", labelWidth=200, valueType=float, orientation="horizontal")
oasysgui.lineEdit(box_GrazingAngle_value, self, "GrazingAngle", "Grazing Angle [deg]", labelWidth=200, valueType=float, orientation="horizontal")
'''
elif element_type == ElementType.SOURCE: # For source, the positioning directives are limited
box_orientation = oasysgui.widgetBox(box_combos,
"",
orientation="horizontal",
width=width - 20)
gui.label(box_orientation,
self,
label="Orientation",
labelWidth=87)
gui.comboBox(box_orientation,
self,
"OrientationGUI",
items=positioning_directives_orientation,
sendSelectedValue=True,
orientation="horizontal",
callback=set_positioning_directives)
box_type = oasysgui.widgetBox(box_combos,
"",
orientation="horizontal",
width=width - 20)
gui.label(box_type, self, label="Position", labelWidth=87)
gui.comboBox(box_type,
self,
"WhatWhereReferTo",
items=positioning_directives_combos_source,
sendSelectedValue=True,
orientation="horizontal",
callback=set_positioning_directives) # Send the value
gui.separator(box_combos)
self.use_custom_box = oasysgui.widgetBox(box,
"",
orientation="vertical",
width=width - 20)
self.use_custom_box_empty = oasysgui.widgetBox(
box, "", orientation="vertical", width=width - 20)
box_XYCentre = oasysgui.widgetBox(self.use_custom_box,
"",
orientation="horizontal",
width=width - 20)
box_XYCentre_check = oasysgui.widgetBox(box_XYCentre,
"",
orientation="horizontal",
width=20)
box_XYCentre_value = oasysgui.widgetBox(box_XYCentre,
"",
orientation="vertical")
# = oasysgui.widgetBox(box_Distance, "", orientation="vertical", width=width - 20)
# self.use_custom_box_empty = oasysgui.widgetBox(box_Distance, "", orientation="horizontal", width=width - 20)
# box_what = oasysgui.widgetBox(self.use_custom_box, "", orientation="horizontal")
# gui.label(box_what, self, label="Place", labelWidth=87)
# gui.comboBox(box_what, self, "What", label="",
# items=positioning_directives_what,
# sendSelectedValue=True, orientation="horizontal", callback=set_positioning_directives)
# gui.label(box_what, self, label=" of this O.E.", labelWidth=80)
#
# box_where = oasysgui.widgetBox(self.use_custom_box, "", orientation="horizontal")
# gui.label(box_where, self, label="at", labelWidth=87)
# gui.comboBox(box_where, self, "Where", label="",
# items=positioning_directives_where,
# sendSelectedValue=True, orientation="horizontal", callback=set_positioning_directives)
# gui.label(box_where, self, label=" of", labelWidth=80)
#
# box_refer_to = oasysgui.widgetBox(self.use_custom_box, "", orientation="horizontal")
# gui.label(box_refer_to, self, label=" ", labelWidth=87)
# gui.comboBox(box_refer_to, self, "ReferTo", label="",
# items=positioning_directives_refer_to,
# sendSelectedValue=True, orientation="horizontal", callback=set_positioning_directives)
# gui.label(box_refer_to, self, label=" O.E.", labelWidth=80)
'''
gui.comboBox(box_combos, self, "WhichAngle", label="Type Of Angle",
items=positioning_directives_which_angle, labelWidth=box_combos.width()-150,
sendSelectedValue=True, orientation="horizontal", callback=set_WhichAngle)
'''
gui.checkBox(box_XYCentre_check,
self,
"XYCentre_checked",
"",
callback=set_XYCentre_checked)
'''
gui.checkBox(box_GrazingAngle_check, self, "GrazingAngle_checked", "", callback=set_GrazingAngle_checked)
gui.checkBox(box_Angle_check, self, "Angle_checked", "", callback=set_Angle_checked)
'''
set_XYCentre_checked()
'''
set_Angle_checked()
set_GrazingAngle_checked()
'''
self.le_XCentre = oasysgui.lineEdit(box_XYCentre_value,
self,
"XCentre",
"X Centre",
labelWidth=196,
valueType=float,
orientation="horizontal")
self.le_YCentre = oasysgui.lineEdit(box_XYCentre_value,
self,
"YCentre",
"Y Centre",
labelWidth=196,
valueType=float,
orientation="horizontal")
'''
oasysgui.lineEdit(box_Angle_value, self, "Angle", "Angle [deg]", labelWidth=200, valueType=float, orientation="horizontal")
oasysgui.lineEdit(box_GrazingAngle_value, self, "GrazingAngle", "Grazing Angle [deg]", labelWidth=200, valueType=float, orientation="horizontal")
'''
set_positioning_directives()
def __init__(self):
super().__init__()
tabs_setting = gui.tabWidget(self.controlArea)
tabs_setting.setFixedWidth(450)
gui.button(self.controlArea, self, "Refresh", callback=self.plot_results)
# graph tab
tab_gen = ShadowGui.createTabPage(tabs_setting, "General")
# FOR FUTURE DEVELOPMENTS
#tab_his = ShadowGui.createTabPage(tabs_setting, "Histograms")
#tab_col = ShadowGui.createTabPage(tabs_setting, "Color")
incremental_box = ShadowGui.widgetBox(tab_gen, "Incremental Result", addSpace=True, orientation="horizontal", height=80)
gui.checkBox(incremental_box, self, "keep_result", "Keep Result")
gui.button(incremental_box, self, "Clear", callback=self.clearResults)
screen_box = ShadowGui.widgetBox(tab_gen, "Screen Position Settings", addSpace=True, orientation="vertical", height=140)
self.image_plane_combo = gui.comboBox(screen_box, self, "image_plane", label="Position of the Image",
items=["On Image Plane", "Retraced"],
callback=self.set_ImagePlane, sendSelectedValue=False, orientation="horizontal")
self.image_plane_box = ShadowGui.widgetBox(screen_box, "", addSpace=True, orientation="vertical", width=350, height=110)
self.image_plane_box_empty = ShadowGui.widgetBox(screen_box, "", addSpace=True, orientation="vertical", width=350, height=110)
ShadowGui.lineEdit(self.image_plane_box, self, "image_plane_new_position", "Image Plane new Position", labelWidth=220, valueType=float, orientation="horizontal")
gui.comboBox(self.image_plane_box, self, "image_plane_rel_abs_position", label="Position Type", labelWidth=250,
items=["Absolute", "Relative"], sendSelectedValue=False, orientation="horizontal")
self.set_ImagePlane()
general_box = ShadowGui.widgetBox(tab_gen, "General Settings", addSpace=True, orientation="vertical", height=350)
self.x_column = gui.comboBox(general_box, self, "x_column_index", label="X Column",labelWidth=80,
items=["1: X",
"2: Y",
"3: Z",
"4: X'",
"5: Y'",
"6: Z'",
"7: Es X",
"8: Es Y",
"9: Es Z",
"10: Ray Flag",
"11: Energy",
"12: Ray Index",
"13: Optical Path",
"14: Phase s",
"15: Phase p",
"16: Ep X",
"17: Ep Y",
"18: Ep Z",
"19: Wavelength",
"20: R = sqrt(X^2 + Y^2 + Z^2)",
"21: Theta (angle from Y axis)",
"22: Magnitude = |Es| + |Ep|",
"23: Total Intensity = |Es|^2 + |Ep|^2",
"24: S Intensity = |Es|^2",
"25: P Intensity = |Ep|^2",
"26: |K|",
"27: K X",
"28: K Y",
"29: K Z",
"30: S0-stokes = |Es|^2 + |Ep|^2",
"31: S1-stokes = |Es|^2 - |Ep|^2",
"32: S2-stokes = 2|Es||Ep|cos(Phase s-Phase p)",
"33: S3-stokes = 2|Es||Ep|sin(Phase s-Phase p)",
],
sendSelectedValue=False, orientation="horizontal")
gui.comboBox(general_box, self, "x_range", label="X Range", labelWidth=250,
items=["<Default>",
"Set.."],
callback=self.set_XRange, sendSelectedValue=False, orientation="horizontal")
self.xrange_box = ShadowGui.widgetBox(general_box, "", addSpace=True, orientation="vertical", width=420, height=100)
self.xrange_box_empty = ShadowGui.widgetBox(general_box, "", addSpace=True, orientation="vertical", width=420, height=100)
ShadowGui.lineEdit(self.xrange_box, self, "x_range_min", "X min", labelWidth=220, valueType=float, orientation="horizontal")
ShadowGui.lineEdit(self.xrange_box, self, "x_range_max", "X max", labelWidth=220, valueType=float, orientation="horizontal")
self.set_XRange()
self.y_column = gui.comboBox(general_box, self, "y_column_index", label="Y Column",labelWidth=80,
items=["1: X",
"2: Y",
"3: Z",
"4: X'",
"5: Y'",
"6: Z'",
"7: Es X",
"8: Es Y",
"9: Es Z",
"10: Ray Flag",
"11: Energy",
"12: Ray Index",
"13: Optical Path",
"14: Phase s",
"15: Phase p",
"16: Ep X",
"17: Ep Y",
"18: Ep Z",
"19: Wavelength",
"20: R = sqrt(X^2 + Y^2 + Z^2)",
"21: Theta (angle from Y axis)",
"22: Magnitude = |Es| + |Ep|",
"23: Total Intensity = |Es|^2 + |Ep|^2",
"24: S Intensity = |Es|^2",
"25: P Intensity = |Ep|^2",
"26: |K|",
"27: K X",
"28: K Y",
"29: K Z",
"30: S0-stokes = |Es|^2 + |Ep|^2",
"31: S1-stokes = |Es|^2 - |Ep|^2",
"32: S2-stokes = 2|Es||Ep|cos(Phase s-Phase p)",
"33: S3-stokes = 2|Es||Ep|sin(Phase s-Phase p)",
],
sendSelectedValue=False, orientation="horizontal")
gui.comboBox(general_box, self, "y_range", label="Y Range",labelWidth=250,
items=["<Default>",
"Set.."],
callback=self.set_YRange, sendSelectedValue=False, orientation="horizontal")
self.yrange_box = ShadowGui.widgetBox(general_box, "", addSpace=True, orientation="vertical", width=420, height=100)
self.yrange_box_empty = ShadowGui.widgetBox(general_box, "", addSpace=True, orientation="vertical", width=420, height=100)
ShadowGui.lineEdit(self.yrange_box, self, "y_range_min", "Y min", labelWidth=220, valueType=float, orientation="horizontal")
ShadowGui.lineEdit(self.yrange_box, self, "y_range_max", "Y max", labelWidth=220, valueType=float, orientation="horizontal")
self.set_YRange()
gui.comboBox(general_box, self, "rays", label="Rays", labelWidth=250,
items=["All rays",
"Good Only",
"Lost Only"],
sendSelectedValue=False, orientation="horizontal")
gui.comboBox(general_box, self, "cartesian_axis", label="Cartesian Axis",labelWidth=300,
items=["No",
"Yes"],
sendSelectedValue=False, orientation="horizontal")
histograms_box = ShadowGui.widgetBox(tab_gen, "Histograms settings", addSpace=True, orientation="vertical", height=70)
ShadowGui.lineEdit(histograms_box, self, "number_of_bins", "Number of Bins", labelWidth=250, valueType=int, orientation="horizontal")
self.image_box = gui.widgetBox(self.mainArea, "Plot Result", addSpace=True, orientation="vertical")
self.image_box.setFixedHeight(self.IMAGE_HEIGHT)
self.image_box.setFixedWidth(self.IMAGE_WIDTH)
self.shadow_output = QtGui.QTextEdit()
out_box = gui.widgetBox(self.mainArea, "Shadow Output", addSpace=True, orientation="horizontal")
out_box.layout().addWidget(self.shadow_output)
out_box.setFixedWidth(self.IMAGE_WIDTH)
self.shadow_output.setFixedHeight(100)
self.shadow_output.setFixedWidth(self.IMAGE_WIDTH-50)
def __init__(self):
self.setFixedWidth(590)
self.setFixedHeight(550)
left_box_1 = oasysgui.widgetBox(self.controlArea,
"CCD Image",
addSpace=True,
orientation="vertical")
gui.comboBox(left_box_1,
self,
"is_textual",
label="Image Type",
labelWidth=250,
items=["JPEG/PNG", "Textual"],
sendSelectedValue=False,
orientation="horizontal",
callback=self.setTextual)
########################################
self.select_file_box_1 = oasysgui.widgetBox(left_box_1,
"Textual Image Parameters",
addSpace=False,
orientation="horizontal",
height=250)
self.le_image_txt_file_name = oasysgui.lineEdit(
self.select_file_box_1,
self,
"image_file_name",
"Image File Name",
labelWidth=120,
valueType=str,
orientation="horizontal")
self.le_image_txt_file_name.setFixedWidth(300)
gui.button(self.select_file_box_1,
self,
"...",
callback=self.selectTxtFile)
self.select_file_box_2 = oasysgui.widgetBox(left_box_1,
"Image Parameters",
addSpace=False,
orientation="vertical",
height=250)
select_file_box_2_int = oasysgui.widgetBox(self.select_file_box_2,
"",
addSpace=False,
orientation="horizontal")
self.le_image_file_name = oasysgui.lineEdit(select_file_box_2_int,
self,
"image_file_name",
"Image File Name",
labelWidth=120,
valueType=str,
orientation="horizontal")
self.le_image_file_name.setFixedWidth(300)
gui.button(select_file_box_2_int,
self,
"...",
callback=self.selectFile)
select_file_box_2_figure = oasysgui.widgetBox(self.select_file_box_2,
"",
addSpace=False,
orientation="horizontal")
figure_box = oasysgui.widgetBox(select_file_box_2_figure,
"Preview",
addSpace=False,
orientation="vertical",
width=350,
height=180)
self.preview_box = QtWidgets.QLabel("")
self.preview_box.setAlignment(Qt.AlignCenter)
self.preview_box.setSizePolicy(QtWidgets.QSizePolicy.Expanding,
QtWidgets.QSizePolicy.Expanding)
figure_box.layout().addWidget(self.preview_box)
data_box = oasysgui.widgetBox(select_file_box_2_figure,
"Data",
addSpace=False,
orientation="vertical")
le = oasysgui.lineEdit(data_box,
self,
"number_of_x_pixels",
"Number of x Pixels",
valueType=int,
orientation="horizontal")
le.setReadOnly(True)
font = QtGui.QFont(le.font())
font.setBold(True)
le.setFont(font)
palette = QtGui.QPalette(le.palette()) # make a copy of the palette
palette.setColor(QtGui.QPalette.Text, QtGui.QColor('dark blue'))
palette.setColor(QtGui.QPalette.Base, QtGui.QColor(243, 240, 160))
le.setPalette(palette)
le = oasysgui.lineEdit(data_box,
self,
"number_of_z_pixels",
"Number of z Pixels",
valueType=int,
orientation="horizontal")
le.setReadOnly(True)
font = QtGui.QFont(le.font())
font.setBold(True)
le.setFont(font)
palette = QtGui.QPalette(le.palette()) # make a copy of the palette
palette.setColor(QtGui.QPalette.Text, QtGui.QColor('dark blue'))
palette.setColor(QtGui.QPalette.Base, QtGui.QColor(243, 240, 160))
le.setPalette(palette)
########################################
self.setTextual()
self.loadImage()
oasysgui.lineEdit(left_box_1,
self,
"pixel_size",
"Pixel Size [um]",
labelWidth=200,
valueType=float,
orientation="horizontal")
oasysgui.lineEdit(left_box_1,
self,
"number_of_x_bins",
"Number of Bin per Pixel [x]",
labelWidth=200,
valueType=int,
orientation="horizontal")
oasysgui.lineEdit(left_box_1,
self,
"number_of_z_bins",
"Number of Bin per Pixel [z]",
labelWidth=200,
valueType=int,
orientation="horizontal")
gui.checkBox(left_box_1, self, "flip_vertically", "Flip Vertically")
gui.checkBox(left_box_1, self, "flip_horizontally",
"Flip Horizontally")
gui.separator(self.controlArea)
button = gui.button(self.controlArea,
self,
"Convert To Beam",
callback=self.convertToBeam)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def __init__(self):
super().__init__()
self.runaction = OWAction("Compute", self)
self.runaction.triggered.connect(self.compute)
self.addAction(self.runaction)
geom = QApplication.desktop().availableGeometry()
self.setGeometry(QRect(round(geom.width()*0.05),
round(geom.height()*0.05),
round(min(geom.width()*0.98, self.MAX_WIDTH)),
round(min(geom.height()*0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
self.general_options_box = gui.widgetBox(self.controlArea, "General Options", addSpace=True, orientation="horizontal")
gui.checkBox(self.general_options_box, self, 'is_automatic_run', 'Automatic Execution')
self.button_box = gui.widgetBox(self.controlArea, "", orientation="horizontal")
#widget buttons: compute, set defaults, help
gui.button(self.button_box, self, "Compute", callback=self.compute, height=35)
gui.button(self.button_box, self, "Defaults", callback=self.defaults, height=35)
gui.separator(self.controlArea, height=10)
self.build_gui()
gui.rubber(self.controlArea)
self.main_tabs = oasysgui.tabWidget(self.mainArea)
plot_tab = oasysgui.createTabPage(self.main_tabs, "Results")
out_tab = oasysgui.createTabPage(self.main_tabs, "Output")
self.view_box = oasysgui.widgetBox(plot_tab, "Results Options", addSpace=False, orientation="horizontal")
view_box_1 = oasysgui.widgetBox(self.view_box, "", addSpace=False, orientation="vertical", width=350)
self.view_type_combo = gui.comboBox(view_box_1, self, "view_type", label="View Results",
labelWidth=220,
items=["No", "Yes"],
callback=self.set_ViewType, sendSelectedValue=False, orientation="horizontal")
oasysgui.widgetBox(self.view_box, "", addSpace=False, orientation="vertical", width=100)
#* -------------------------------------------------------------------------------------------------------------
propagation_box = oasysgui.widgetBox(self.view_box, "", addSpace=False, orientation="vertical")
self.le_wise_live_propagation_mode = gui.lineEdit(propagation_box, self, "wise_live_propagation_mode", "Propagation Mode", labelWidth=150, valueType=str, orientation="horizontal")
self.le_wise_live_propagation_mode.setAlignment(Qt.AlignCenter)
self.le_wise_live_propagation_mode.setReadOnly(True)
font = QFont(self.le_wise_live_propagation_mode.font())
font.setBold(True)
self.le_wise_live_propagation_mode.setFont(font)
self.set_wise_live_propagation_mode()
#* -------------------------------------------------------------------------------------------------------------
self.tab = []
self.tabs = oasysgui.tabWidget(plot_tab)
self.initializeTabs()
self.wise_output = QtWidgets.QTextEdit()
self.wise_output.setReadOnly(True)
self.wise_output.setStyleSheet("background-color: white;")
out_box = gui.widgetBox(out_tab, "System Output", addSpace=True, orientation="horizontal")
out_box.layout().addWidget(self.wise_output)
self.wise_output.setFixedHeight(590)
self.wise_output.setFixedWidth(700)
gui.rubber(self.mainArea)
def __init__(self):
super().__init__()
gui.button(self.controlArea, self, "Refresh", callback=self.plot_results, height=45)
gui.separator(self.controlArea, 10)
self.tabs_setting = gui.tabWidget(self.controlArea)
self.tabs_setting.setFixedWidth(self.CONTROL_AREA_WIDTH - 5)
# graph tab
tab_set = oasysgui.createTabPage(self.tabs_setting, "Plot Settings")
tab_gen = oasysgui.createTabPage(self.tabs_setting, "Histogram Settings")
screen_box = oasysgui.widgetBox(
tab_set, "Screen Position Settings", addSpace=True, orientation="vertical", height=110
)
self.image_plane_combo = gui.comboBox(
screen_box,
self,
"image_plane",
label="Position of the Image",
items=["On Image Plane", "Retraced"],
labelWidth=260,
callback=self.set_ImagePlane,
sendSelectedValue=False,
orientation="horizontal",
)
self.image_plane_box = oasysgui.widgetBox(screen_box, "", addSpace=True, orientation="vertical", height=110)
self.image_plane_box_empty = oasysgui.widgetBox(
screen_box, "", addSpace=True, orientation="vertical", height=110
)
oasysgui.lineEdit(
self.image_plane_box,
self,
"image_plane_new_position",
"Image Plane new Position",
labelWidth=220,
valueType=float,
orientation="horizontal",
)
gui.comboBox(
self.image_plane_box,
self,
"image_plane_rel_abs_position",
label="Position Type",
labelWidth=250,
items=["Absolute", "Relative"],
sendSelectedValue=False,
orientation="horizontal",
)
self.set_ImagePlane()
general_box = oasysgui.widgetBox(tab_set, "General Settings", addSpace=True, orientation="vertical", height=250)
self.x_column = gui.comboBox(
general_box,
self,
"x_column_index",
label="Column",
labelWidth=70,
items=[
"1: X",
"2: Y",
"3: Z",
"4: X'",
"5: Y'",
"6: Z'",
"7: Es X",
"8: Es Y",
"9: Es Z",
"10: Ray Flag",
"11: Energy",
"12: Ray Index",
"13: Optical Path",
"14: Phase s",
"15: Phase p",
"16: Ep X",
"17: Ep Y",
"18: Ep Z",
"19: Wavelength",
"20: R = sqrt(X^2 + Y^2 + Z^2)",
"21: Theta (angle from Y axis)",
"22: Magnitude = |Es| + |Ep|",
"23: Total Intensity = |Es|^2 + |Ep|^2",
"24: S Intensity = |Es|^2",
"25: P Intensity = |Ep|^2",
"26: |K|",
"27: K X",
"28: K Y",
"29: K Z",
"30: S0-stokes = |Ep|^2 + |Es|^2",
"31: S1-stokes = |Ep|^2 - |Es|^2",
"32: S2-stokes = 2|Es||Ep|cos(Phase s-Phase p)",
"33: S3-stokes = 2|Es||Ep|sin(Phase s-Phase p)",
],
sendSelectedValue=False,
orientation="horizontal",
)
gui.comboBox(
general_box,
self,
"x_range",
label="X Range",
labelWidth=250,
items=["<Default>", "Set.."],
callback=self.set_XRange,
sendSelectedValue=False,
orientation="horizontal",
)
self.xrange_box = oasysgui.widgetBox(general_box, "", addSpace=True, orientation="vertical", height=100)
self.xrange_box_empty = oasysgui.widgetBox(general_box, "", addSpace=True, orientation="vertical", height=100)
oasysgui.lineEdit(
self.xrange_box, self, "x_range_min", "X min", labelWidth=220, valueType=float, orientation="horizontal"
)
oasysgui.lineEdit(
self.xrange_box, self, "x_range_max", "X max", labelWidth=220, valueType=float, orientation="horizontal"
)
self.set_XRange()
self.weight_column = gui.comboBox(
general_box,
self,
"weight_column_index",
label="Weight",
labelWidth=70,
items=[
"0: No Weight",
"1: X",
"2: Y",
"3: Z",
"4: X'",
"5: Y'",
"6: Z'",
"7: Es X",
"8: Es Y",
"9: Es Z",
"10: Ray Flag",
"11: Energy",
"12: Ray Index",
"13: Optical Path",
"14: Phase s",
"15: Phase p",
"16: Ep X",
"17: Ep Y",
"18: Ep Z",
"19: Wavelength",
"20: R = sqrt(X^2 + Y^2 + Z^2)",
"21: Theta (angle from Y axis)",
"22: Magnitude = |Es| + |Ep|",
"23: Total Intensity = |Es|^2 + |Ep|^2",
"24: S Intensity = |Es|^2",
"25: P Intensity = |Ep|^2",
"26: |K|",
"27: K X",
"28: K Y",
"29: K Z",
"30: S0-stokes = |Ep|^2 + |Es|^2",
"31: S1-stokes = |Ep|^2 - |Es|^2",
"32: S2-stokes = 2|Es||Ep|cos(Phase s-Phase p)",
"33: S3-stokes = 2|Es||Ep|sin(Phase s-Phase p)",
],
sendSelectedValue=False,
orientation="horizontal",
)
gui.comboBox(
general_box,
self,
"rays",
label="Rays",
labelWidth=250,
items=["All rays", "Good Only", "Lost Only"],
sendSelectedValue=False,
orientation="horizontal",
)
incremental_box = oasysgui.widgetBox(
tab_gen, "Incremental Result", addSpace=True, orientation="horizontal", height=80
)
gui.checkBox(incremental_box, self, "keep_result", "Keep Result")
gui.button(incremental_box, self, "Clear", callback=self.clearResults)
histograms_box = oasysgui.widgetBox(
tab_gen, "Histograms settings", addSpace=True, orientation="vertical", height=90
)
oasysgui.lineEdit(
histograms_box,
self,
"number_of_bins",
"Number of Bins",
labelWidth=250,
valueType=int,
orientation="horizontal",
)
gui.comboBox(
histograms_box,
self,
"is_conversion_active",
label="Is U.M. conversion active",
labelWidth=250,
items=["No", "Yes"],
sendSelectedValue=False,
orientation="horizontal",
)
self.main_tabs = gui.tabWidget(self.mainArea)
plot_tab = gui.createTabPage(self.main_tabs, "Plots")
out_tab = gui.createTabPage(self.main_tabs, "Output")
self.image_box = gui.widgetBox(plot_tab, "Plot Result", addSpace=True, orientation="vertical")
self.image_box.setFixedHeight(self.IMAGE_HEIGHT)
self.image_box.setFixedWidth(self.IMAGE_WIDTH)
self.shadow_output = QtGui.QTextEdit()
self.shadow_output.setReadOnly(True)
out_box = gui.widgetBox(out_tab, "System Output", addSpace=True, orientation="horizontal")
out_box.layout().addWidget(self.shadow_output)
self.shadow_output.setFixedHeight(600)
self.shadow_output.setFixedWidth(600)
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea,
"X0h Request Form",
addSpace=True,
orientation="vertical",
width=400,
height=630)
left_box_2 = oasysgui.widgetBox(left_box_1,
"X-rays",
addSpace=True,
orientation="horizontal",
width=380,
height=110)
left_box_2_1 = oasysgui.widgetBox(left_box_2,
"",
addSpace=True,
orientation="vertical",
width=150,
height=110)
gui.radioButtons(
left_box_2_1,
self,
"xway", ["Wavelength (Å)", "Energy (keV)", "Characteristic line"],
callback=self.set_xway)
self.box_wave = oasysgui.widgetBox(left_box_2,
"",
addSpace=True,
orientation="vertical",
width=190)
gui.separator(self.box_wave, height=10)
gui.lineEdit(self.box_wave,
self,
"wave",
label="",
labelWidth=0,
addSpace=False,
valueType=float,
orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2,
"",
addSpace=True,
orientation="horizontal",
width=190,
height=110)
gui.separator(self.box_line, height=120)
XRayServerGui.combobox_text(self.box_line,
self,
"line",
label="",
labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True,
orientation="horizontal",
selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
left_box_3 = oasysgui.widgetBox(left_box_1,
"Target",
addSpace=True,
orientation="horizontal",
width=380,
height=140)
left_box_3_1 = oasysgui.widgetBox(left_box_3,
"",
addSpace=True,
orientation="vertical",
width=125,
height=110)
gui.radioButtons(left_box_3_1,
self,
"coway",
["Crystal", "Other Material", "Chemical Formula"],
callback=self.set_coway)
self.box_crystal = oasysgui.widgetBox(left_box_3,
"",
addSpace=True,
orientation="horizontal",
width=210)
XRayServerGui.combobox_text(self.box_crystal,
self,
"code",
label="",
labelWidth=0,
items=self.get_crystals(),
sendSelectedValue=True,
orientation="horizontal",
selectedValue=self.code)
button = gui.button(self.box_crystal,
self,
"?",
callback=self.help_crystals)
button.setFixedWidth(15)
self.box_other = oasysgui.widgetBox(left_box_3,
"",
addSpace=True,
orientation="horizontal",
width=210)
gui.separator(self.box_other, height=75)
XRayServerGui.combobox_text(self.box_other,
self,
"amor",
label="",
labelWidth=0,
items=self.get_others(),
sendSelectedValue=True,
orientation="horizontal",
selectedValue=self.amor)
button = gui.button(self.box_other,
self,
"?",
callback=self.help_others)
button.setFixedWidth(15)
self.box_chemical = oasysgui.widgetBox(left_box_3,
"",
addSpace=True,
orientation="vertical",
width=210,
height=140)
gui.separator(self.box_chemical, height=50)
gui.lineEdit(self.box_chemical,
self,
"chem",
label=" ",
labelWidth=1,
addSpace=False,
valueType=str,
orientation="horizontal",
callback=self.set_rho)
gui.lineEdit(self.box_chemical,
self,
"rho",
label=u"\u03C1" + " (g/cm3)",
labelWidth=60,
addSpace=False,
valueType=float,
orientation="horizontal")
self.set_coway()
left_box_4 = oasysgui.widgetBox(left_box_1,
"Reflection",
addSpace=True,
orientation="horizontal",
width=380,
height=60)
gui.lineEdit(left_box_4,
self,
"i1",
label="Miller indices",
labelWidth=200,
addSpace=False,
valueType=int,
orientation="horizontal")
gui.lineEdit(left_box_4,
self,
"i2",
label=" ",
labelWidth=1,
addSpace=False,
valueType=int,
orientation="horizontal")
gui.lineEdit(left_box_4,
self,
"i3",
label=" ",
labelWidth=1,
addSpace=False,
valueType=int,
orientation="horizontal")
left_box_5 = oasysgui.widgetBox(
left_box_1,
"Database Options for dispersion corrections df1, df2",
addSpace=True,
orientation="vertical",
width=380,
height=185)
gui.radioButtons(left_box_5, self, "df1df2", [
"Auto (Henke at low energy, X0h at mid, Brennan-Cowan\nat high)",
"Use X0h data (5-25 keV or 0.5-2.5 A), recommended for\nBragg diffraction",
"Use Henke data (0.01-30 keV or 0.4-1200 A),\nrecommended for soft x-rays",
"Use Brennan-Cowan data (0.03-700 keV or 0.02-400 A)",
"Compare results for all of the above sources"
])
left_box_6 = oasysgui.widgetBox(left_box_1,
"Output Options",
addSpace=True,
orientation="vertical",
width=380,
height=50)
gui.checkBox(left_box_6,
self,
"detail",
"Print atomic coordinates",
labelWidth=250)
button = gui.button(self.controlArea,
self,
"Get X0h!",
callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.x0h_output = QWebView(self.tabs[0])
self.tabs[0].layout().addWidget(self.x0h_output)
self.x0h_output.setFixedHeight(640)
self.x0h_output.setFixedWidth(740)
def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Write HDF5 File", self)
self.runaction.triggered.connect(self.write_file)
self.addAction(self.runaction)
self.setFixedWidth(590)
self.setFixedHeight(500)
left_box_1 = oasysgui.widgetBox(self.controlArea,
"HDF5 File Selection",
addSpace=True,
orientation="vertical",
width=570,
height=400)
gui.checkBox(left_box_1, self, 'is_automatic_run',
'Automatic Execution')
gui.separator(left_box_1, height=10)
figure_box = oasysgui.widgetBox(left_box_1,
"",
addSpace=True,
orientation="horizontal",
width=550,
height=50)
#
#
#
self.le_file_name = oasysgui.lineEdit(figure_box,
self,
"file_name",
"Output File Name",
labelWidth=120,
valueType=str,
orientation="horizontal")
self.le_file_name.setFixedWidth(330)
gui.button(figure_box, self, "...", callback=self.selectFile)
gui.separator(left_box_1, height=10)
#
#
#
gui.comboBox(
left_box_1,
self,
"TYPE_OF_OUTPUT",
label=" Type of output file",
labelWidth=260,
items=[
'COMSYL hdf5 with multi-mode', 'WOFRY hdf5 with multi-mode',
'WOFRY multiple files'
],
#callback=self.set_Propagator,
sendSelectedValue=False,
orientation="horizontal")
self.le_index_format = oasysgui.lineEdit(
left_box_1,
self,
"index_format",
"index format [for individual files]",
labelWidth=200,
valueType=str,
orientation="horizontal")
gui.separator(left_box_1, height=10)
#
#
#
gui.comboBox(
left_box_1,
self,
"ALL_MODES",
label=" Modes to write",
labelWidth=260,
items=['Selected modes', 'All modes'],
#callback=self.set_Propagator,
sendSelectedValue=False,
orientation="horizontal")
oasysgui.lineEdit(left_box_1,
self,
"MODE_TO",
"To mode index:",
labelWidth=200,
valueType=int,
orientation="horizontal")
gui.separator(left_box_1, height=10)
#
#
#
button = gui.button(self.controlArea,
self,
"Write File",
callback=self.write_file)
button.setFixedHeight(45)
self.le_index_format.setFixedWidth(330)
gui.rubber(self.controlArea)
