def test_from_json_defroute(self):
data = '{"type": "interface", "name": "em1", "use_dhcp": true}'
interface1 = objects.object_from_json(json.loads(data))
data = """{
"type": "interface",
"name": "em1",
"use_dhcp": true,
"defroute": false
}
"""
interface2 = objects.object_from_json(json.loads(data))
self.assertTrue(interface1.defroute)
self.assertFalse(interface2.defroute)
def test_from_json_with_addresses(self):
data = """{
"type": "interface",
"name": "em1",
"use_dhcp": false,
"mtu": 1501,
"addresses": [{
"ip_netmask": "192.0.2.1/24"
}],
"routes": [{
"next_hop": "192.0.2.1",
"ip_netmask": "192.0.2.1/24"
}]
}
"""
interface = objects.object_from_json(json.loads(data))
self.assertEqual("em1", interface.name)
self.assertEqual(False, interface.use_dhcp)
self.assertEqual(False, interface.use_dhcpv6)
self.assertEqual(1501, interface.mtu)
address1 = interface.v4_addresses()[0]
self.assertEqual("192.0.2.1", address1.ip)
self.assertEqual("255.255.255.0", address1.netmask)
route1 = interface.routes[0]
self.assertEqual("192.0.2.1", route1.next_hop)
self.assertEqual("192.0.2.1/24", route1.ip_netmask)
def test_from_json_dhcp(self):
data = '{"type": "vlan", "device": "em1", "vlan_id": 16,' \
'"use_dhcp": true}'
vlan = objects.object_from_json(json.loads(data))
self.assertEqual("em1", vlan.device)
self.assertEqual(16, vlan.vlan_id)
self.assertEqual(True, vlan.use_dhcp)
def test_from_json_primary_interface(self):
data = """{
"type": "ovs_bridge",
"name": "br-foo",
"use_dhcp": true,
"members": [
{
"type": "interface",
"name": "em1",
"primary": "true"
},
{
"type": "interface",
"name": "em2"
}]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("br-foo", bridge.name)
self.assertEqual(True, bridge.use_dhcp)
self.assertEqual("em1", bridge.primary_interface_name)
interface1 = bridge.members[0]
self.assertEqual("em1", interface1.name)
self.assertEqual(True, interface1.ovs_port)
self.assertEqual(True, interface1.primary)
self.assertEqual("br-foo", interface1.bridge_name)
interface2 = bridge.members[1]
self.assertEqual("em2", interface2.name)
self.assertEqual(True, interface2.ovs_port)
self.assertEqual("br-foo", interface2.bridge_name)
def test_from_json(self):
data = """{
"type": "ovs_bridge",
"name": "br-foo",
"members": [{
"type": "ovs_tunnel",
"name": "tun0",
"tunnel_type": "gre",
"ovs_options": [
"remote_ip=192.168.1.1"
],
"ovs_extra": [
"ovs extra"
]
}]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("br-foo", bridge.name)
tun0 = bridge.members[0]
self.assertEqual("tun0", tun0.name)
self.assertFalse(tun0.ovs_port)
self.assertEqual("br-foo", tun0.bridge_name)
self.assertEqual("gre", tun0.tunnel_type)
self.assertEqual(
["options:remote_ip=192.168.1.1"],
tun0.ovs_options)
self.assertEqual(
["ovs extra"],
tun0.ovs_extra)
def test_from_json_dhcp_with_nic1_nic2(self):
def test_numbered_nics():
return {"nic1": "em1", "nic2": "em2"}
self.stubs.Set(objects, '_numbered_nics', test_numbered_nics)
data = """{
"type": "ovs_bond",
"name": "bond1",
"use_dhcp": true,
"members": [
{
"type": "interface",
"name": "nic1"
},
{
"type": "interface",
"name": "nic2"
}
]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("bond1", bridge.name)
self.assertEqual(True, bridge.use_dhcp)
interface1 = bridge.members[0]
self.assertEqual("em1", interface1.name)
interface2 = bridge.members[1]
self.assertEqual("em2", interface2.name)
def test_from_json_dhcp_nic1(self):
def test_numbered_nics():
return {"nic1": "em3"}
self.stubs.Set(objects, '_numbered_nics', test_numbered_nics)
data = '{"type": "interface", "name": "nic1", "use_dhcp": true}'
interface = objects.object_from_json(json.loads(data))
self.assertEqual("em3", interface.name)
self.assertEqual(True, interface.use_dhcp)
def test_from_json_dns_servers(self):
data = """{
"type": "interface",
"name": "em1",
"use_dhcp": true,
"dns_servers": ["1.2.3.4"]
}
"""
interface1 = objects.object_from_json(json.loads(data))
self.assertEqual(["1.2.3.4"], interface1.dns_servers)
def test_from_json_dhclient_args(self):
data = """{
"type": "interface",
"name": "em1",
"use_dhcp": true,
"dhclient_args": "--foobar"
}
"""
interface1 = objects.object_from_json(json.loads(data))
self.assertEqual("--foobar", interface1.dhclient_args)
def test_from_json_dhcp_nic1(self):
def test_numbered_nics():
return {"nic1": "em4"}
self.stubs.Set(objects, '_numbered_nics', test_numbered_nics)
data = '{"type": "vlan", "device": "nic1", "vlan_id": 16,' \
'"use_dhcp": true}'
vlan = objects.object_from_json(json.loads(data))
self.assertEqual("em4", vlan.device)
self.assertEqual(16, vlan.vlan_id)
self.assertEqual(True, vlan.use_dhcp)
def test_interface_from_json(self):
data = """{
"type": "ivs_bridge",
"members": [{
"type": "interface",
"name": "nic2"
}]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("ivs", bridge.name)
interface1 = bridge.members[0]
self.assertEqual("nic2", interface1.name)
self.assertEqual(False, interface1.ovs_port)
self.assertEqual("ivs", interface1.ivs_bridge_name)
def main(argv=sys.argv):
opts = parse_opts(argv)
configure_logger(opts.verbose, opts.debug)
logger.info('Using config file at: %s' % opts.config_file)
iface_array = []
provider = None
if opts.provider:
if opts.provider == 'ifcfg':
provider = impl_ifcfg.IfcfgNetConfig()
elif opts.provider == 'eni':
provider = impl_eni.ENINetConfig()
elif opts.provider == 'iproute':
provider = impl_iproute.IPRouteNetConfig()
else:
logger.error('Invalid provider specified.')
return 1
else:
if os.path.exists('/etc/sysconfig/network-scripts/'):
provider = impl_ifcfg.IfcfgNetConfig()
elif os.path.exists('/etc/network/'):
provider = impl_eni.ENINetConfig()
else:
logger.error('Unable to set provider for this operating system.')
return 1
if os.path.exists(opts.config_file):
with open(opts.config_file) as cf:
iface_array = yaml.load(cf.read()).get("network_config")
logger.debug('network_config JSON: %s' % str(iface_array))
else:
logger.error('No config file exists at: %s' % opts.config_file)
return 1
if not isinstance(iface_array, list):
logger.error('No interfaces defined in config: %s' % opts.config_file)
return 1
for iface_json in iface_array:
obj = objects.object_from_json(iface_json)
provider.add_object(obj)
files_changed = provider.apply(noop=opts.noop, cleanup=opts.cleanup)
if opts.noop:
for location, data in files_changed.iteritems():
print "File: %s\n" % location
print data
print "----"
return 0
def test_from_json_dhcp(self):
data = """{
"type": "linux_bridge",
"name": "br-foo",
"use_dhcp": true,
"members": [{
"type": "interface",
"name": "em1"
}]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("br-foo", bridge.name)
self.assertTrue(bridge.use_dhcp)
interface1 = bridge.members[0]
self.assertEqual("em1", interface1.name)
self.assertFalse(interface1.ovs_port)
self.assertEqual("br-foo", interface1.linux_bridge_name)
def test_from_json_dhcp_with_nic1(self):
def test_numbered_nics():
return {"nic1": "em5"}
self.stubs.Set(objects, '_numbered_nics', test_numbered_nics)
data = """{
"type": "ovs_bridge",
"name": "br-foo",
"use_dhcp": true,
"members": [{
"type": "interface",
"name": "nic1"
}]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("br-foo", bridge.name)
self.assertEqual(True, bridge.use_dhcp)
interface1 = bridge.members[0]
self.assertEqual("em5", interface1.name)
self.assertEqual(True, interface1.ovs_port)
self.assertEqual("br-foo", interface1.bridge_name)
def test_from_json_dhcp(self):
data = """{
"type": "ovs_bond",
"name": "bond1",
"use_dhcp": true,
"members": [
{
"type": "interface",
"name": "em1"
},
{
"type": "interface",
"name": "em2"
}
]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("bond1", bridge.name)
self.assertEqual(True, bridge.use_dhcp)
interface1 = bridge.members[0]
self.assertEqual("em1", interface1.name)
interface2 = bridge.members[1]
self.assertEqual("em2", interface2.name)
def test_from_json_dhcp(self):
data = """{
"type": "linux_bond",
"name": "bond1",
"use_dhcp": true,
"members": [
{
"type": "interface",
"name": "em1"
},
{
"type": "interface",
"name": "em2"
}
]
}
"""
bridge = objects.object_from_json(json.loads(data))
self.assertEqual("bond1", bridge.name)
self.assertTrue(bridge.use_dhcp)
interface1 = bridge.members[0]
self.assertEqual("em1", interface1.name)
interface2 = bridge.members[1]
self.assertEqual("em2", interface2.name)
def main(argv=sys.argv, main_logger=None):
opts = parse_opts(argv)
if not main_logger:
main_logger = common.configure_logger(log_file=not opts.noop)
common.logger_level(main_logger, opts.verbose, opts.debug)
main_logger.info(f"Using config file at: {opts.config_file}")
iface_array = []
configure_sriov = False
sriovpf_member_of_bond_ovs_port_list = []
provider = None
if opts.provider:
if opts.provider == 'ifcfg':
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'eni':
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'iproute':
provider = impl_iproute.IPRouteNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
main_logger.error("Invalid provider specified.")
return 1
else:
if os.path.exists('%s/etc/sysconfig/network-scripts/' % opts.root_dir):
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif os.path.exists('%s/etc/network/' % opts.root_dir):
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
main_logger.error("Unable to set provider for this operating "
"system.")
return 1
# Read the interface mapping file, if it exists
# This allows you to override the default network naming abstraction
# mappings by specifying a specific nicN->name or nicN->MAC mapping
if os.path.exists(opts.mapping_file):
main_logger.info(f"Using mapping file at: {opts.mapping_file}")
with open(opts.mapping_file) as cf:
iface_map = yaml.safe_load(cf.read())
iface_mapping = iface_map.get("interface_mapping")
main_logger.debug(f"interface_mapping: {iface_mapping}")
persist_mapping = opts.persist_mapping
main_logger.debug(f"persist_mapping: {persist_mapping}")
else:
main_logger.info("Not using any mapping file.")
iface_mapping = None
persist_mapping = False
# If --interfaces is specified, either return the real name of the
# interfaces specified, or return the map of all nic abstractions/names.
if opts.interfaces is not None:
reported_nics = {}
mapped_nics = objects.mapped_nics(iface_mapping)
retval = 0
if len(opts.interfaces) > 0:
for requested_nic in opts.interfaces:
found = False
# Check to see if requested iface is a mapped NIC name.
if requested_nic in mapped_nics:
reported_nics[requested_nic] = mapped_nics[requested_nic]
found = True
# Check to see if the requested iface is a real NIC name
if requested_nic in mapped_nics.values():
if found is True: # Name matches alias and real NIC
# (return the mapped NIC, but warn of overlap).
main_logger.warning(f"{requested_nic} overlaps with "
"real NIC name.")
else:
reported_nics[requested_nic] = requested_nic
found = True
if not found:
retval = 1
if reported_nics:
main_logger.debug("Interface mapping requested for interface: "
"%s" % reported_nics.keys())
else:
main_logger.debug("Interface mapping requested for all interfaces")
reported_nics = mapped_nics
# Return the report on the mapped NICs. If all NICs were found, exit
# cleanly, otherwise exit with status 1.
main_logger.debug("Interface report requested, exiting after report.")
print(json.dumps(reported_nics))
return retval
# Read config file containing network configs to apply
if os.path.exists(opts.config_file):
try:
with open(opts.config_file) as cf:
iface_array = yaml.safe_load(cf.read()).get("network_config")
main_logger.debug(f"network_config: {iface_array}")
except IOError:
main_logger.error(f"Error reading file: {opts.config_file}")
return 1
else:
main_logger.error(f"No config file exists at: {opts.config_file}")
return 1
if not isinstance(iface_array, list):
main_logger.error("No interfaces defined in config: "
f"{opts.config_file}")
return 1
for iface_json in iface_array:
if iface_json.get('type') != 'route_table':
iface_json.update({'nic_mapping': iface_mapping})
iface_json.update({'persist_mapping': persist_mapping})
validation_errors = validator.validate_config(iface_array)
if validation_errors:
if opts.exit_on_validation_errors:
main_logger.error('\n'.join(validation_errors))
return 1
else:
main_logger.warning('\n'.join(validation_errors))
# Look for the presence of SriovPF types in the first parse of the json
# if SriovPFs exists then PF devices needs to be configured so that the VF
# devices are created.
# The VFs will not be available now and an exception
# SriovVfNotFoundException will be raised while fetching the device name.
# After the first parse the SR-IOV PF devices would be configured and the
# VF devices would be created.
# In the second parse, all other objects shall be added
for iface_json in iface_array:
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
continue
if isinstance(obj, objects.SriovPF):
configure_sriov = True
provider.add_object(obj)
elif hasattr(obj, 'members') and obj.members is not None:
if check_configure_sriov(obj):
configure_sriov = True
provider.add_object(obj)
sriovpf_member_of_bond_ovs_port_list.extend(
get_sriovpf_member_of_bond_ovs_port(obj))
# After reboot, shared_block for pf interface in switchdev mode will be
# missing in case IPv6 is enabled on the slaves of the bond and that bond
# is an ovs port. This is due to the fact that OVS assumes another entity
# manages the slaves.
# So as a workaround for that case we are disabling IPv6 over pfs so that
# OVS creates the shared_blocks ingress
if sriovpf_member_of_bond_ovs_port_list:
disable_ipv6_for_netdevs(sriovpf_member_of_bond_ovs_port_list)
if configure_sriov:
# Apply the ifcfgs for PFs now, so that NM_CONTROLLED=no is applied
# for each of the PFs before configuring the numvfs for the PF device.
# This step allows the network manager to unmanage the created VFs.
# In the second parse, when these ifcfgs for PFs are encountered,
# os-net-config skips the ifup <ifcfg-pfs>, since the ifcfgs for PFs
# wouldn't have changed.
pf_files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if not opts.noop:
restart_ovs = bool(sriovpf_member_of_bond_ovs_port_list)
# Avoid ovs restart for os-net-config re-runs, which will
# dirupt the offload configuration
if os.path.exists(utils._SRIOV_CONFIG_SERVICE_FILE):
restart_ovs = False
utils.configure_sriov_pfs(
execution_from_cli=True,
restart_openvswitch=restart_ovs)
for iface_json in iface_array:
# All objects other than the sriov_pf will be added here.
# The VFs are expected to be available now and an exception
# SriovVfNotFoundException shall be raised if not available.
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
if not opts.noop:
raise
if not isinstance(obj, objects.SriovPF):
provider.add_object(obj)
if configure_sriov and not opts.noop:
utils.configure_sriov_vfs()
files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if opts.noop:
if configure_sriov:
files_changed.update(pf_files_changed)
for location, data in files_changed.items():
print("File: %s\n" % location)
print(data)
print("----")
if opts.detailed_exit_codes and len(files_changed) > 0:
return 2
return 0
def main(argv=sys.argv):
opts = parse_opts(argv)
configure_logger(opts.verbose, opts.debug)
logger.info('Using config file at: %s' % opts.config_file)
iface_array = []
configure_sriov = False
provider = None
if opts.provider:
if opts.provider == 'ifcfg':
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'eni':
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'iproute':
provider = impl_iproute.IPRouteNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Invalid provider specified.')
return 1
else:
if os.path.exists('%s/etc/sysconfig/network-scripts/' % opts.root_dir):
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif os.path.exists('%s/etc/network/' % opts.root_dir):
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Unable to set provider for this operating system.')
return 1
# Read the interface mapping file, if it exists
# This allows you to override the default network naming abstraction
# mappings by specifying a specific nicN->name or nicN->MAC mapping
if os.path.exists(opts.mapping_file):
logger.info('Using mapping file at: %s' % opts.mapping_file)
with open(opts.mapping_file) as cf:
iface_map = yaml.safe_load(cf.read())
iface_mapping = iface_map.get("interface_mapping")
logger.debug('interface_mapping JSON: %s' % str(iface_mapping))
persist_mapping = opts.persist_mapping
logger.debug('persist_mapping: %s' % persist_mapping)
else:
logger.info('Not using any mapping file.')
iface_mapping = None
persist_mapping = False
# If --interfaces is specified, either return the real name of the
# interfaces specified, or return the map of all nic abstractions/names.
if opts.interfaces is not None:
reported_nics = {}
mapped_nics = objects.mapped_nics(iface_mapping)
retval = 0
if len(opts.interfaces) > 0:
for requested_nic in opts.interfaces:
found = False
# Check to see if requested iface is a mapped NIC name.
if requested_nic in mapped_nics:
reported_nics[requested_nic] = mapped_nics[requested_nic]
found = True
# Check to see if the requested iface is a real NIC name
if requested_nic in mapped_nics.values():
if found is True: # Name matches alias and real NIC
# (return the mapped NIC, but warn of overlap).
logger.warning('"%s" overlaps with real NIC name.' %
(requested_nic))
else:
reported_nics[requested_nic] = requested_nic
found = True
if not found:
retval = 1
if reported_nics:
logger.debug("Interface mapping requested for interface: "
"%s" % reported_nics.keys())
else:
logger.debug("Interface mapping requested for all interfaces")
reported_nics = mapped_nics
# Return the report on the mapped NICs. If all NICs were found, exit
# cleanly, otherwise exit with status 1.
logger.debug("Interface report requested, exiting after report.")
print(reported_nics)
return retval
# Read config file containing network configs to apply
if os.path.exists(opts.config_file):
try:
with open(opts.config_file) as cf:
iface_array = yaml.safe_load(cf.read()).get("network_config")
logger.debug('network_config JSON: %s' % str(iface_array))
except IOError:
logger.error("Error reading file: %s" % opts.config_file)
return 1
else:
logger.error('No config file exists at: %s' % opts.config_file)
return 1
if not isinstance(iface_array, list):
logger.error('No interfaces defined in config: %s' % opts.config_file)
return 1
for iface_json in iface_array:
if iface_json.get('type') != 'route_table':
iface_json.update({'nic_mapping': iface_mapping})
iface_json.update({'persist_mapping': persist_mapping})
validation_errors = validator.validate_config(iface_array)
if validation_errors:
if opts.exit_on_validation_errors:
logger.error('\n'.join(validation_errors))
return 1
else:
logger.warning('\n'.join(validation_errors))
# Look for the presence of SriovPF types in the first parse of the json
# if SriovPFs exists then PF devices needs to be configured so that the VF
# devices are created.
# The VFs will not be available now and an exception
# SriovVfNotFoundException will be raised while fetching the device name.
# After the first parse the SR-IOV PF devices would be configured and the
# VF devices would be created.
# In the second parse, all other objects shall be added
for iface_json in iface_array:
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
continue
if isinstance(obj, objects.SriovPF):
configure_sriov = True
provider.add_object(obj)
elif hasattr(obj, 'members') and obj.members is not None:
if check_configure_sriov(obj):
configure_sriov = True
provider.add_object(obj)
if configure_sriov:
# Apply the ifcfgs for PFs now, so that NM_CONTROLLED=no is applied
# for each of the PFs before configuring the numvfs for the PF device.
# This step allows the network manager to unmanage the created VFs.
# In the second parse, when these ifcfgs for PFs are encountered,
# os-net-config skips the ifup <ifcfg-pfs>, since the ifcfgs for PFs
# wouldn't have changed.
pf_files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if not opts.noop:
utils.configure_sriov_pfs()
for iface_json in iface_array:
# All objects other than the sriov_pf will be added here.
# The VFs are expected to be available now and an exception
# SriovVfNotFoundException shall be raised if not available.
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
if not opts.noop:
raise
if not isinstance(obj, objects.SriovPF):
provider.add_object(obj)
if configure_sriov and not opts.noop:
utils.configure_sriov_vfs()
files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if opts.noop:
if configure_sriov:
files_changed.update(pf_files_changed)
for location, data in files_changed.items():
print("File: %s\n" % location)
print(data)
print("----")
if opts.detailed_exit_codes and len(files_changed) > 0:
return 2
return 0
def main(argv=sys.argv):
opts = parse_opts(argv)
configure_logger(opts.verbose, opts.debug)
logger.info('Using config file at: %s' % opts.config_file)
if opts.mapping_file:
logger.info('Using mapping file at: %s' % opts.mapping_file)
iface_array = []
provider = None
if opts.provider:
if opts.provider == 'ifcfg':
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'eni':
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'iproute':
provider = impl_iproute.IPRouteNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Invalid provider specified.')
return 1
else:
if os.path.exists('%s/etc/sysconfig/network-scripts/' % opts.root_dir):
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif os.path.exists('%s/etc/network/' % opts.root_dir):
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Unable to set provider for this operating system.')
return 1
# Read config file containing network configs to apply
if os.path.exists(opts.config_file):
with open(opts.config_file) as cf:
iface_array = yaml.load(cf.read()).get("network_config")
logger.debug('network_config JSON: %s' % str(iface_array))
else:
logger.error('No config file exists at: %s' % opts.config_file)
return 1
if not isinstance(iface_array, list):
logger.error('No interfaces defined in config: %s' % opts.config_file)
return 1
# Read the interface mapping file, if it exists
# This allows you to override the default network naming abstraction
# mappings by specifying a specific nicN->name or nicN->MAC mapping
if os.path.exists(opts.mapping_file):
with open(opts.mapping_file) as cf:
iface_map = yaml.load(cf.read())
iface_mapping = iface_map.get("interface_mapping")
logger.debug('interface_mapping JSON: %s' % str(iface_mapping))
persist_mapping = opts.persist_mapping
logger.debug('persist_mapping: %s' % persist_mapping)
else:
iface_mapping = None
persist_mapping = False
for iface_json in iface_array:
iface_json.update({'nic_mapping': iface_mapping})
iface_json.update({'persist_mapping': persist_mapping})
validation_errors = validator.validate_config(iface_array)
if validation_errors:
if opts.exit_on_validation_errors:
logger.error('\n'.join(validation_errors))
return 1
else:
logger.warning('\n'.join(validation_errors))
for iface_json in iface_array:
obj = objects.object_from_json(iface_json)
provider.add_object(obj)
files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if opts.noop:
for location, data in files_changed.items():
print("File: %s\n" % location)
print(data)
print("----")
if opts.detailed_exit_codes and len(files_changed) > 0:
return 2
return 0
def test_from_json_dhcp(self):
data = '{"type": "interface", "name": "em1", "use_dhcp": true}'
interface = objects.object_from_json(json.loads(data))
self.assertEqual("em1", interface.name)
self.assertEqual(True, interface.use_dhcp)
def generate_ifcfg_activate_ports():
"""Generate ifcfg and restart ports.
:returns: an object of IfcfgNetConfig,
a list of ivs physical uplinks,
and a list of ivs internal ports.
"""
provider = impl_ifcfg.IfcfgNetConfig(noop=True, root_dir='')
intfs = []
if os.path.exists(NET_CONF_PATH):
try:
json_data = open(NET_CONF_PATH).read()
intfs = jsonutils.loads(json_data).get("network_config")
except:
LOG.error('Fail to load file at: %s' % NET_CONF_PATH)
return 1
for intf in intfs:
obj = objects.object_from_json(intf)
provider.add_object(obj)
# store the route on physical nics
route_dict = {}
# store the ovs internal port ifcfg
internal_port_dict = {}
internal_ports = []
# store uplink ifcfg
phy_link_dict = {}
uplinks = []
for intf, data in provider.interface_data.iteritems():
# ivs does not need bond
if "bond" in intf:
match = re.search('BOND_IFACES="(.+?)"', data)
if match:
uplinks = match.group(1).split()
continue
# if route is assigned to physical port
if ("vlan" not in intf and "ivs" not in intf):
route_data = provider.route_data.get(intf, '')
route_path = provider.root_dir + impl_ifcfg.route_config_path(intf)
route_dict[route_path] = route_data
intf_path = provider.root_dir + impl_ifcfg.ifcfg_config_path(intf)
# update data for internal port
if "TYPE=OVSIntPort" in data:
# delete all lines starts with OVS_
d = re.sub("OVS_.*?\n", '', data, flags=re.DOTALL)
# replace all ovs with ivs
d = re.sub("ovs", 'ivs', d, flags=re.DOTALL)
# replace all OVS with IVS
d = re.sub("OVS", 'IVS', d, flags=re.DOTALL)
internal_port_dict[intf_path] = d
internal_ports.append(intf)
else: # update data for physical port
phy_link_dict[intf_path] = data
# make sure noop is turned off for ifdown and ifup
provider.noop = False
# write route
for location, data in route_dict.iteritems():
provider.write_config(location, data)
# write internal port config
for location, data in internal_port_dict.iteritems():
provider.write_config(location, data)
# write physical ports config, restart uplinks
for uplink in uplinks:
provider.ifdown(uplink)
for location, data in phy_link_dict.iteritems():
provider.write_config(location, data)
for uplink in uplinks:
provider.ifup(uplink)
LOG.info("IVS uplinks: %s" % ','.join(uplinks))
LOG.info("IVS internal_ports %s" % ','.join(internal_ports))
return provider, uplinks, internal_ports
def test_from_json_dhcp(self):
data = '{"type": "interface", "name": "em1", "use_dhcp": true}'
interface = objects.object_from_json(json.loads(data))
self.assertEqual("em1", interface.name)
self.assertTrue(interface.use_dhcp)
def apply(self):
self.configure_logger(self.verbose, self.debug)
logger.info('Using config: %s' % self.network_config)
iface_array = []
configure_sriov = False
provider = None
if self.provider:
if self.provider == 'ifcfg':
provider = impl_ifcfg.IfcfgNetConfig(noop=self.noop,
root_dir=self.root_dir)
elif self.provider == 'eni':
provider = impl_eni.ENINetConfig(noop=self.noop,
root_dir=self.root_dir)
elif self.provider == 'iproute':
provider = impl_iproute.IPRouteNetConfig(
noop=self.noop, root_dir=self.root_dir)
else:
logger.error('Invalid provider specified.')
return 1
else:
ifcfg_dir = "/etc/sysconfig/network-scripts/"
if os.path.exists('%s%s' % (self.root_dir, ifcfg_dir)):
provider = impl_ifcfg.IfcfgNetConfig(noop=self.noop,
root_dir=self.root_dir)
elif os.path.exists('%s/etc/network/' % self.root_dir):
provider = impl_eni.ENINetConfig(noop=self.noop,
root_dir=self.root_dir)
else:
logger.error('Unable to set provider for this \
operating system.')
return 1
iface_array = self.network_config
if not isinstance(iface_array, list):
logger.error('No interfaces defined in config: %s' %
self.network_config)
return 1
validation_errors = validator.validate_config(iface_array)
if validation_errors:
if self.exit_on_validation_errors:
logger.error('\n'.join(validation_errors))
return 1
else:
logger.warning('\n'.join(validation_errors))
# Look for the presence of SriovPF types in the first parse of the json
# if SriovPFs exists then PF devices needs to be configured so that the
# VF devices are created.
# The VFs will not be available now and an exception
# SriovVfNotFoundException will be raised while fetching the device
# name.
# After the first parse the SR-IOV PF devices would be configured and
# the VF devices would be created.
# In the second parse, all other objects shall be added
for iface_json in iface_array:
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
continue
if isinstance(obj, objects.SriovPF):
configure_sriov = True
provider.add_object(obj)
elif hasattr(obj, 'members') and obj.members is not None:
if check_configure_sriov(obj):
configure_sriov = True
provider.add_object(obj)
if configure_sriov:
# Apply the ifcfgs for PFs now, so that NM_CONTROLLED=no is applied
# for each of the PFs before configuring the numvfs for the PF
# device.
# This step allows the network manager to unmanage the created VFs.
# In the second parse, when these ifcfgs for PFs are encountered,
# os-net-config skips the ifup <ifcfg-pfs>, since the ifcfgs for
# PFs wouldn't have changed.
pf_files_changed = provider.apply(cleanup=self.cleanup,
activate=not self.no_activate)
if not self.noop:
utils.configure_sriov_pfs()
for iface_json in iface_array:
# All objects other than the sriov_pf will be added here.
# The VFs are expected to be available now and an exception
# SriovVfNotFoundException shall be raised if not available.
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
if not self.noop:
raise
if not isinstance(obj, objects.SriovPF):
provider.add_object(obj)
if configure_sriov and not self.noop:
utils.configure_sriov_vfs()
files_changed = provider.apply(cleanup=self.cleanup,
activate=not self.no_activate)
logger.info("files_changed: %s" %
[k for k, v in files_changed.items()])
if self.noop:
if configure_sriov:
files_changed.update(pf_files_changed)
for location, data in files_changed.items():
print("File: %s\n" % location)
print(data)
print("----")
if self.detailed_exit_codes and len(files_changed) > 0:
return 2
return 0
def main(argv=sys.argv):
opts = parse_opts(argv)
configure_logger(opts.verbose, opts.debug)
logger.info('Using config file at: %s' % opts.config_file)
if opts.mapping_file:
logger.info('Using mapping file at: %s' % opts.mapping_file)
iface_array = []
provider = None
if opts.provider:
if opts.provider == 'ifcfg':
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'eni':
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'iproute':
provider = impl_iproute.IPRouteNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Invalid provider specified.')
return 1
else:
if os.path.exists('%s/etc/sysconfig/network-scripts/' % opts.root_dir):
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif os.path.exists('%s/etc/network/' % opts.root_dir):
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Unable to set provider for this operating system.')
return 1
# Read config file containing network configs to apply
if os.path.exists(opts.config_file):
with open(opts.config_file) as cf:
iface_array = yaml.load(cf.read()).get("network_config")
logger.debug('network_config JSON: %s' % str(iface_array))
else:
logger.error('No config file exists at: %s' % opts.config_file)
return 1
if not isinstance(iface_array, list):
logger.error('No interfaces defined in config: %s' % opts.config_file)
return 1
# Read the interface mapping file, if it exists
# This allows you to override the default network naming abstraction
# mappings by specifying a specific nicN->name or nicN->MAC mapping
if os.path.exists(opts.mapping_file):
with open(opts.mapping_file) as cf:
iface_map = yaml.load(cf.read())
iface_mapping = iface_map.get("interface_mapping")
logger.debug('interface_mapping JSON: %s' % str(iface_mapping))
persist_mapping = opts.persist_mapping
logger.debug('persist_mapping: %s' % persist_mapping)
else:
iface_mapping = None
persist_mapping = False
for iface_json in iface_array:
iface_json.update({'nic_mapping': iface_mapping})
iface_json.update({'persist_mapping': persist_mapping})
obj = objects.object_from_json(iface_json)
provider.add_object(obj)
files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if opts.noop:
for location, data in files_changed.iteritems():
print("File: %s\n" % location)
print(data)
print("----")
if opts.detailed_exit_codes and len(files_changed) > 0:
return 2
return 0
def main(argv=sys.argv):
opts = parse_opts(argv)
configure_logger(opts.verbose, opts.debug)
logger.info('Using config file at: %s' % opts.config_file)
iface_array = []
configure_sriov = False
provider = None
if opts.provider:
if opts.provider == 'ifcfg':
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'eni':
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif opts.provider == 'iproute':
provider = impl_iproute.IPRouteNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Invalid provider specified.')
return 1
else:
if os.path.exists('%s/etc/sysconfig/network-scripts/' % opts.root_dir):
provider = impl_ifcfg.IfcfgNetConfig(noop=opts.noop,
root_dir=opts.root_dir)
elif os.path.exists('%s/etc/network/' % opts.root_dir):
provider = impl_eni.ENINetConfig(noop=opts.noop,
root_dir=opts.root_dir)
else:
logger.error('Unable to set provider for this operating system.')
return 1
# Read the interface mapping file, if it exists
# This allows you to override the default network naming abstraction
# mappings by specifying a specific nicN->name or nicN->MAC mapping
if os.path.exists(opts.mapping_file):
logger.info('Using mapping file at: %s' % opts.mapping_file)
with open(opts.mapping_file) as cf:
iface_map = yaml.safe_load(cf.read())
iface_mapping = iface_map.get("interface_mapping")
logger.debug('interface_mapping JSON: %s' % str(iface_mapping))
persist_mapping = opts.persist_mapping
logger.debug('persist_mapping: %s' % persist_mapping)
else:
logger.info('Not using any mapping file.')
iface_mapping = None
persist_mapping = False
# If --interfaces is specified, either return the real name of the
# interfaces specified, or return the map of all nic abstractions/names.
if opts.interfaces is not None:
reported_nics = {}
mapped_nics = objects.mapped_nics(iface_mapping)
retval = 0
if len(opts.interfaces) > 0:
for requested_nic in opts.interfaces:
found = False
# Check to see if requested iface is a mapped NIC name.
if requested_nic in mapped_nics:
reported_nics[requested_nic] = mapped_nics[requested_nic]
found = True
# Check to see if the requested iface is a real NIC name
if requested_nic in mapped_nics.values():
if found is True: # Name matches alias and real NIC
# (return the mapped NIC, but warn of overlap).
logger.warning('"%s" overlaps with real NIC name.'
% (requested_nic))
else:
reported_nics[requested_nic] = requested_nic
found = True
if not found:
retval = 1
if reported_nics:
logger.debug("Interface mapping requested for interface: "
"%s" % reported_nics.keys())
else:
logger.debug("Interface mapping requested for all interfaces")
reported_nics = mapped_nics
# Return the report on the mapped NICs. If all NICs were found, exit
# cleanly, otherwise exit with status 1.
logger.debug("Interface report requested, exiting after report.")
print(reported_nics)
return retval
# Read config file containing network configs to apply
if os.path.exists(opts.config_file):
try:
with open(opts.config_file) as cf:
iface_array = yaml.safe_load(cf.read()).get("network_config")
logger.debug('network_config JSON: %s' % str(iface_array))
except IOError:
logger.error("Error reading file: %s" % opts.config_file)
return 1
else:
logger.error('No config file exists at: %s' % opts.config_file)
return 1
if not isinstance(iface_array, list):
logger.error('No interfaces defined in config: %s' % opts.config_file)
return 1
for iface_json in iface_array:
if iface_json.get('type') != 'route_table':
iface_json.update({'nic_mapping': iface_mapping})
iface_json.update({'persist_mapping': persist_mapping})
validation_errors = validator.validate_config(iface_array)
if validation_errors:
if opts.exit_on_validation_errors:
logger.error('\n'.join(validation_errors))
return 1
else:
logger.warning('\n'.join(validation_errors))
# Look for the presence of SriovPF types in the first parse of the json
# if SriovPFs exists then PF devices needs to be configured so that the VF
# devices are created.
# The VFs will not be available now and an exception
# SriovVfNotFoundException will be raised while fetching the device name.
# After the first parse the SR-IOV PF devices would be configured and the
# VF devices would be created.
# In the second parse, all other objects shall be added
for iface_json in iface_array:
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
continue
if isinstance(obj, objects.SriovPF):
configure_sriov = True
provider.add_object(obj)
elif hasattr(obj, 'members') and obj.members is not None:
if check_configure_sriov(obj):
configure_sriov = True
provider.add_object(obj)
if configure_sriov:
# Apply the ifcfgs for PFs now, so that NM_CONTROLLED=no is applied
# for each of the PFs before configuring the numvfs for the PF device.
# This step allows the network manager to unmanage the created VFs.
# In the second parse, when these ifcfgs for PFs are encountered,
# os-net-config skips the ifup <ifcfg-pfs>, since the ifcfgs for PFs
# wouldn't have changed.
pf_files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if not opts.noop:
utils.configure_sriov_pfs()
for iface_json in iface_array:
# All objects other than the sriov_pf will be added here.
# The VFs are expected to be available now and an exception
# SriovVfNotFoundException shall be raised if not available.
try:
obj = objects.object_from_json(iface_json)
except utils.SriovVfNotFoundException:
if not opts.noop:
raise
if not isinstance(obj, objects.SriovPF):
provider.add_object(obj)
if configure_sriov and not opts.noop:
utils.configure_sriov_vfs()
files_changed = provider.apply(cleanup=opts.cleanup,
activate=not opts.no_activate)
if opts.noop:
if configure_sriov:
files_changed.update(pf_files_changed)
for location, data in files_changed.items():
print("File: %s\n" % location)
print(data)
print("----")
if opts.detailed_exit_codes and len(files_changed) > 0:
return 2
return 0
