def __init__(self, parent, project, il):
QtGui.QDialog.__init__(self, parent)
self.resize(800,600)
self.setSizeGripEnabled(True)
self.project = project
self.il = il
self.model = AlignmentViewModel(self.il)
# Build the treeView model for layer visibility
self.buildVisibilityModel()
# Always align keypoint-based load. Works with unaligned images
self.model.kp.load(self.project)
# Keypoint-align, initialize from existing align project and align data
if isinstance(il.alignment, KeyPointAlignment):
self.model.align_by = ALIGN_BY_KEYPOINTS
elif isinstance(il.alignment, RectAlignment):
self.model.ra.load(self.project)
self.model.align_by = ALIGN_BY_DIMENSIONS
# Dialog is two areas, the view, and the controls for the view
hlayout = QtGui.QHBoxLayout()
self.setLayout(hlayout)
view_layout = QtGui.QVBoxLayout()
self.view_tabs = QtGui.QTabBar()
self.view_tabs.currentChanged.connect(self.set_view_type)
self.update_tabs()
view_layout.addWidget(self.view_tabs)
self.view = AlignmentViewWidget(self.vis_model, self.il, self.model)
self.ra_id = RectAlignmentControllerView(self, self.model)
self.kp_id = KeypointAlignmentControllerView(self, self.model)
self.view.overlays.add(self.ra_id)
self.view.overlays.add(self.kp_id)
view_layout.addWidget(self.view, 1)
self.directions_label = QtGui.QLabel("")
view_layout.addWidget(self.directions_label, 0)
hlayout.addLayout(view_layout, 1)
# Align Controls
control_layout = QtGui.QFormLayout()
rect_align_controls = RectAlignSettingsWidget(self, self.model.ra)
keypoint_align_controls = KeypointAlignmentWidget(self, self.model.kp)
# Alignment selection
self.align_selection = QtGui.QComboBox()
self.align_selection.addItem("Perimeter + Dimensions")
self.align_selection.addItem("Keypoints")
self.align_selection.activated.connect(self.align_selection_cb_changed)
control_layout.addRow("Align By:", self.align_selection)
# And the widget stack to drive that
self.stacked_layout = QtGui.QStackedLayout()
self.stacked_layout.addWidget(rect_align_controls)
self.stacked_layout.addWidget(keypoint_align_controls)
# right pane layout
control_buttons_layout = QtGui.QVBoxLayout()
control_buttons_layout.addLayout(control_layout)
control_buttons_layout.addLayout(self.stacked_layout)
# Visbox
vis_gb = QtGui.QGroupBox("Visible Layers")
self.vis_widget = VisibilityTree(self.vis_model)
vis_gb_layout = QtGui.QVBoxLayout()
vis_gb.setLayout(vis_gb_layout)
vis_gb_layout.addWidget(self.vis_widget)
control_buttons_layout.addWidget(vis_gb)
bbox = QtGui.QDialogButtonBox(QtGui.QDialogButtonBox.Save | QtGui.QDialogButtonBox.Cancel)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
control_buttons_layout.addWidget(bbox)
hlayout.addLayout(control_buttons_layout, 0)
# Explicitly disconnect child-events for the rect-align model
# We (mostly) don't care about changes to the perimeter
self.model.ra.changed.disconnect(self.model.change)
self.model.changed.connect(self.view.update)
self.vis_model.changed.connect(self.view.update)
self.model.changed.connect(self.update_controls)
self._selected_view = None
self._saved_transforms = [
scale(0.8), scale(0.8)
]
# Undo stack
self.undoStack = UndoStack()
self.undoStack.setup_actions(self)
self.update_controls()
class LayerAlignmentDialog(QtGui.QDialog):
def __init__(self, parent, project, il):
QtGui.QDialog.__init__(self, parent)
self.resize(800,600)
self.setSizeGripEnabled(True)
self.project = project
self.il = il
self.model = AlignmentViewModel(self.il)
# Build the treeView model for layer visibility
self.buildVisibilityModel()
# Always align keypoint-based load. Works with unaligned images
self.model.kp.load(self.project)
# Keypoint-align, initialize from existing align project and align data
if isinstance(il.alignment, KeyPointAlignment):
self.model.align_by = ALIGN_BY_KEYPOINTS
elif isinstance(il.alignment, RectAlignment):
self.model.ra.load(self.project)
self.model.align_by = ALIGN_BY_DIMENSIONS
# Dialog is two areas, the view, and the controls for the view
hlayout = QtGui.QHBoxLayout()
self.setLayout(hlayout)
view_layout = QtGui.QVBoxLayout()
self.view_tabs = QtGui.QTabBar()
self.view_tabs.currentChanged.connect(self.set_view_type)
self.update_tabs()
view_layout.addWidget(self.view_tabs)
self.view = AlignmentViewWidget(self.vis_model, self.il, self.model)
self.ra_id = RectAlignmentControllerView(self, self.model)
self.kp_id = KeypointAlignmentControllerView(self, self.model)
self.view.overlays.add(self.ra_id)
self.view.overlays.add(self.kp_id)
view_layout.addWidget(self.view, 1)
self.directions_label = QtGui.QLabel("")
view_layout.addWidget(self.directions_label, 0)
hlayout.addLayout(view_layout, 1)
# Align Controls
control_layout = QtGui.QFormLayout()
rect_align_controls = RectAlignSettingsWidget(self, self.model.ra)
keypoint_align_controls = KeypointAlignmentWidget(self, self.model.kp)
# Alignment selection
self.align_selection = QtGui.QComboBox()
self.align_selection.addItem("Perimeter + Dimensions")
self.align_selection.addItem("Keypoints")
self.align_selection.activated.connect(self.align_selection_cb_changed)
control_layout.addRow("Align By:", self.align_selection)
# And the widget stack to drive that
self.stacked_layout = QtGui.QStackedLayout()
self.stacked_layout.addWidget(rect_align_controls)
self.stacked_layout.addWidget(keypoint_align_controls)
# right pane layout
control_buttons_layout = QtGui.QVBoxLayout()
control_buttons_layout.addLayout(control_layout)
control_buttons_layout.addLayout(self.stacked_layout)
# Visbox
vis_gb = QtGui.QGroupBox("Visible Layers")
self.vis_widget = VisibilityTree(self.vis_model)
vis_gb_layout = QtGui.QVBoxLayout()
vis_gb.setLayout(vis_gb_layout)
vis_gb_layout.addWidget(self.vis_widget)
control_buttons_layout.addWidget(vis_gb)
bbox = QtGui.QDialogButtonBox(QtGui.QDialogButtonBox.Save | QtGui.QDialogButtonBox.Cancel)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
control_buttons_layout.addWidget(bbox)
hlayout.addLayout(control_buttons_layout, 0)
# Explicitly disconnect child-events for the rect-align model
# We (mostly) don't care about changes to the perimeter
self.model.ra.changed.disconnect(self.model.change)
self.model.changed.connect(self.view.update)
self.vis_model.changed.connect(self.view.update)
self.model.changed.connect(self.update_controls)
self._selected_view = None
self._saved_transforms = [
scale(0.8), scale(0.8)
]
# Undo stack
self.undoStack = UndoStack()
self.undoStack.setup_actions(self)
self.update_controls()
def visMakeLeaf(self, il):
l = VisibilityModelLeaf(il.name)
l._il_obj = il
return l
def buildVisibilityModel(self):
self.vis_model = VisibilityModel()
# Add all layers in the project to the visModel. If this layer is visible, put it at the top
g = VisibilityModelGroup("Current")
self.vis_model.addChild(g)
l = self.visMakeLeaf(self.il)
g.addChild(l)
unassigned_ils = set(self.project.imagery.imagelayers)
# Add stackup groups
for sl in self.project.stackup.layers:
g = VisibilityModelGroup(sl.name)
for il in sl.imagelayers:
unassigned_ils.discard(il)
if il is not self.il:
l = self.visMakeLeaf(il)
g.addChild(l)
self.vis_model.addChild(g)
g = VisibilityModelGroup("Unassigned")
for il in unassigned_ils:
if il is not self.il:
l = self.visMakeLeaf(il)
g.addChild(l)
self.vis_model.addChild(g)
self.vis_model.propagate_model()
def update_tabs(self):
self.view_tabs.blockSignals(True)
for i in range(self.view_tabs.count() - 1, -1, -1):
self.view_tabs.removeTab(i)
self.view_tabs.addTab("Unaligned (image)")
self.view_tabs.addTab("Aligned (world)")
self.view_tabs.blockSignals(False)
def accept(self):
if self.model.align_by == ALIGN_BY_DIMENSIONS:
self.model.ra.save(self.project)
else:
self.model.kp.save(self.project)
super(LayerAlignmentDialog, self).accept()
def align_selection_cb_changed(self, idx):
cmd = cmd_set_align_by(self, idx)
self.undoStack.push(cmd)
def set_align_by(self, idx):
self.model.align_by = idx
self.model.view_mode = 0
self.update_tabs()
if self.model.align_by == ALIGN_BY_DIMENSIONS:
self.directions_label.setText("Ctrl-click to add anchor point, Shift-click to delete anchor point.\n" +
"Anchor points constrain handle movement.")
else:
self.directions_label.setText("Ctrl-click to add keypoint. Shift-click to delete keypoint.")
def set_view_type(self, idx):
self.model.view_mode = idx
def save_restore_transform(self):
if self._selected_view is not None:
self._saved_transforms[self._selected_view] = self.view.viewState.transform
self._selected_view = self.model.view_mode
self.view.viewState.transform = self._saved_transforms[self._selected_view]
def update_controls(self):
self.save_restore_transform()
self.align_selection.setCurrentIndex(self.model.align_by)
self.stacked_layout.setCurrentIndex(self.model.align_by)
if self.model.align_by == ALIGN_BY_DIMENSIONS:
self.view.setInteractionDelegate(self.ra_id)
self.view.active_overlays = set([self.ra_id])
else:
self.view.setInteractionDelegate(self.kp_id)
self.view.active_overlays = set([self.kp_id])
self.view_tabs.setCurrentIndex(self.model.view_mode)
